Snapshot of the current situation for standards to be cited in the OJ under the CPD

Transcription

1 Snapshot of the current situation for standards to be cited in the OJ under the CPD Summary: Concerned Standards: 490 * Approved ENs Available Standards cited in the OJ: 120 ** Available Standards not yet cited in the OJ: 32 Ratified Standards not yet available: 32 TOTAL Approved Standards: 184 Drafts which have completed Formal Vote/UAP Voted Drafts waiting for Voting Report: 25 Failed FV/UAP drafts: 15 Drafts in CMC for FV/UAP preparation or undergoing FV/UAP Drafts undergoing FV/UAP: 15 Drafts in CMC for FV: 39 Drafts in CMC for UAP: 14 Drafts before FV/UAP Drafts passed Enquiry and under TC's preparation for FV: 70 Drafts before or at Enquiry stage Drafts undergoing CEN Enquiry: 27 Drafts in CMC for CEN Enquiry: 9 Drafts not yet received in CMC for Enquiry/UAP: 92 * This number will change following: the creation of new Work items or future responses to mandates. evolution on standard status. ** There could be a slight registration delay Page 1

2 Standards cited in the Official Journal: 120 EN 1125:1997/A1: EN 1154:1996/A1: EN 1155:1997/A1: EN 1158:1997/A1: EN 12004:2001/A1: EN : EN : EN : EN : EN : EN : EN : EN : EN : EN : EN : EN : EN : EN : EN : EN : EN : EN : A1: Building hardware Panic exit devices operated by a horizontal bar Requirements and test methods Buiding hardware Controlled door closing devices Requirements and test methods Building hardware Electrically powered hold open devices for swing doors Requirements and test methods C C C Building hardware Door cordinator devices Requirements and test methods C Adhesives for tiles Definitions and specifications C Wastewater lifting plants for buildings and sites Principles of construction and testing Part 1: Lifting plants for wastewater containing faecal matter Wastewater lifting plants for buildings and sites Principles of construction and testing Part 2: Lifting plants for faecal free wastewater Wastewater lifting plants for buildings and sites Principles of construction and testing Part 3: Lifting plants for wastewater containing faecal matter for limited applications Wastewater lifting plants for buildings and sites Principles of construction and testing Part 4: Non return valves for faecal free wastewater and wastewater containing faecal matter Fixed firefighting systems Components for gas extinguishing systems Part 10: Requirements and test methods for pressure gauges and pressure switches Fixed firefighting systems Components for gas extinguishing systems Part 11: Requirements and test methods for mechanical weighing devices Fixed firefighting systems Components for gas extinguishing systems Part 12: Requirements and test methods for pneumatic alarm devices Fixed firefighting systems Components for gas extinguishing systems Part 13: Requirements and test methods for check valves and non return valves Fixed firefighting systems Components for gas extinguishing systems Part 1: Requirements and test methods for electrical automatic control and delay devices Fixed firefighting systems Components for gas extinguishing systems Part 2: Requirements and test methods for non electrical automatic control and delay devices Fixed firefighting systems Components for gas extinguishing systems Part 3: Requirements and test methods for manual triggering and stop devices Fixed firefighting systems Components for gas extinguishing systems Part 5: Requirements and test methods for high and low pressure selector valves and their actuators for CO2 systems Fixed firefighting systems Components for gas extinguishing systems Part 6: Requirements and test methods for non electrical disable devices for CO2 systems Fixed firefighting systems Components for gas extinguishing systems Part 7: Requirements and test methods for nozzles for CO2 systems Fixed firefighting systems Components for gas extinguishing systems Part 9: Requirements and test methods for special fire detectors Smoke and heat control systems Part 2: Specification for natural smoke and heat exhaust ventilators Smoke and heat control systems Part 3: Specification for powered smoke and heat exhaust ventilators Fixed firefighting systems Components for sprinkler and water spray systems Part 1: Sprinklers C C C C C C C C C C C C C C C C C C Page 2

3 EN :1999/A1: EN :2000/A1: EN :2000/A1: EN : EN 12380: EN : EN : EN 12446: EN 12620: EN :2000/A1: EN 12839: EN 12859: EN 12860: EN 13043: EN : EN 13101: EN 13139: EN : EN 13162: EN 13163: EN 13164: EN 13165: Fixed firefighting systems Components for sprinkler and water spray systems Part 2: Wet alarm valve assemblies Fixed firefighting systems Components for sprinkler and water spray systems Part 3: Dry alarm valve assemblies Fixed firefighting systems Components for sprinkler and water spray systems Part 4: Water motor alarms Fixed firefighting systems Components for sprinkler and water spray systems Part 5: Water flow detectors Air admittance valves for drainage systems Requirements, tests methods and evaluation of conformity Fixed firefighting systems Powder systems Part 1: Requirements and test methods for components Fixed firefighting systems Powder systems Part 2: Design, construction and maintenance C 358 C C 358 C C C C C C Chimneys Components Concrete outer wall elements C 67 Aggregates for concrete C Anti glare screens for roads Part 1: Performance and characteristics C C Precast concrete products Elements for fences C Gypsum blocks Definitions, requirements and test methods C 358 Gypsum based adhesives for gypsum blocks Definitions, requirements and test methods Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas Lightweight aggregates Part 1: Lightweight aggregates for concrete, mortar and grout Steps for underground man entry chambers Requirements, marking, testing and evaluation of conformity C C C C Aggregates for mortar C Leak detection systems Part 1: General principles C 67 Thermal insulation products for buildings Factory made mineral wool (MW) products Specification Thermal insulation products for buildings Factory made products of expanded polystyrene (EPS) Specification Thermal insulation products for buildings Factory made products of extruded polystyrene foam (XPS) Specification Thermal insulation products for buildings Factory made rigid polyurethane foam (PUR) products Specification C C C C C C C C 358 Page 3

4 EN 13166: EN 13167: EN 13168: EN 13169: EN 13170: EN 13171: EN : EN 13242: EN 13249: EN 13250: EN 13251: EN 13252: EN 13253: EN 13254: EN 13255: EN 13256: EN 13257: EN 13265: EN 13310: EN : EN : EN 1338: Thermal insulation products for buildings Factory made products of phenolic foam (PF) Specification Thermal insulation products for buildings Factory made cellular glass (CG) products Specification Thermal insulation products for buildings Factory made wood wool (WW) products Specification Thermal insulation products for buildings Factory made products of expanded perlite (EPB) Specification Thermal insulation products for buildings Factory made products of expanded cork (ICB) Specification Thermal insulating products for buildings Factory made wood fibre (WF) products Specification Industrial, commercial and garage doors and gates Product standard Part 1: Products without fire resistance or smoke control characteristics Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction Geotextiles and geotextile related products Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) Geotextiles and geotextile related products Characteristics required for use in the construction of railways Geotextiles and geotextile related products Characteristics required for use in earthworks, foundations and retaining structures Geotextiles and geotextile related products Characteristics required for use in drainage systems Geotextiles and geotextile related products Characteristics required for use in erosion control works (coastal protection, bank revetments) Geotextiles and geotextile related products Characteristics required for use in the construction of reservoirs and dams Geotextiles and geotextile related products Characteristics required for use in the construction of canals Geotextiles and geotextile related products Characteristics required for use in the construction of tunnels and underground structures Geotextiles and geotextile related products Characteristics required for use in solid waste disposals Geotextiles and geotextile related products Characteristics required for use in liquid waste containment projects C C C C C C C C C C C C C C C C C C C C C C C C Kitchen sinks Functional requirements and test methods C 67 Structural bearings Part 7: Spherical and cylindrical PTFE bearings C Armourstone Part 1: Specification C Concrete paving blocks Requirements and test methods C Page 4

5 EN 1339: EN 1340: EN 1341: EN 1342: EN 1343: EN 1344: EN 13450: EN 13502: EN : EN 13813: EN 13986: EN : EN 1423:1997/A1: EN 1433: EN 1457:1999/A1: EN 1520: EN 179:1997/A1: EN : EN 1857: EN 1858: EN 1916: EN 1917: EN 1935: EN 197 1: EN 40 5: EN 40 6: Concrete paving flags Requirements and test methods C Concrete kerb units Requirements and test methods C 67 Slabs of natural stone for external paving Requirements and test methods C Setts of natural stone for external paving Requirements and test methods C Kerbs of natural stone for external paving Requirements and test methods C Clay pavers Requirements and test methods C Aggregates for railway ballast C Chimneys Requirements and test methods for clay/ceramic flue terminals C Anti flooding devices for buildings Part 1: Requirements C Screed material and floor screeds Screed material Properties and requirements Wood based panels for use in construction Characteristics, evaluation of conformity and marking Ceiling mounted radiant panels supplied with water at temperature below 120 C Part 1: Technical specifications and requirements Road marking materials Drop on materials Glass beads, antiskid aggregates and mixtures of the two Drainage channels for vehicular and pedestrian areas Classification, design and testing requirements, marking and evaluation of conformity C C C C C Chimneys Clay/ceramic flue liners Requirements and test methods C Prefabricated reinforced components of lightweight aggregate concrete with open structure Building hardware Emergency exit devices operated by a lever handle or push pad Requirements and test methods Chimneys Requirements for metal chimneys Part 1: System chimney products C C C 67 Chimneys Components Concrete flue liners C 67 Chimneys Components Concrete flue blocks C 67 Concrete pipes and fittings, unreinforced, steel fibre and reinforced C Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced C Building hardware Single axis hinges Requirements and test methods C Cement Part 1: Composition, specifications and conformity criteria for common cements C Lighting columns Part 5: Requirements for steel lighting columns C C Lighting columns Part 6: Requirements for aluminium lighting columns C C Page 5

6 EN 40 7: EN 459 1: EN 523: EN 54 12: EN 54 3:2001/A1: EN 54 4:1997/A1: EN 54 5:2000/A1: EN 54 7:2000/A1: EN 588 2: EN 671 1: EN 671 2: EN 681 1:1996/A2: EN 681 2:2000/A1: EN 681 3:2000/A1: EN 681 4:2000/A1: EN 682: EN 771 1: EN 771 2: EN 771 3: EN 771 4: EN 845 1: EN 845 2: EN 845 3: EN 934 2: Lighting columns Part 7: Requirements for fibre reinforced polymer composite lighting columns C Building lime Part 1: Definitions, specifications and conformity criteria C Steel strip sheaths for prestressing tendons Terminology, requirements, quality control Fire detection and fire alarm systems Part 12: Smoke detectors Line detectors using an optical light beam C C Fire detection and fire alarm systems Part 3: Fire alarm devices Sounders C Fire detection and fire alarm systems Part 4: Power supply equipment C Fire detection and fire alarm systems Part 5: Heat detectors Point detectors C Fire detection and fire alarm systems Part 7: Smoke detectors Point detectors using scattered light, transmitted light or ionization Fibre cement pipes for drains and sewers Part 2: Manholes and inspection chambers Fixed firefighting systems Hose systems Part 1: Hose reels with semi rigid hose Fixed firefighting systems Hose systems Part 2: Hose systems with lay flat hose Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 1: Vulcanized rubber Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 2: Thermoplastic elastomers Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 3: Cellular materials of vulcanized rubber Elastomeric seals Material requirements for pipe joint seals used in water and drainage applications Part 4: Cast polyurethane sealing elements Elastomeric Seals Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids C C C C C C C C C Specification for masonry units Part 1: Clay masonry units C C Specification for masonry units Part 2: Calcium silicate masonry units C C Specification for masonry units Part 3: Aggregate concrete masonry units (Dense and light weight aggregates) Specification for masonry units Part 4: Autoclaved aerated concrete masonry units Specification for ancillary components for masonry Part 1: Ties, tension straps, hangers and brackets C C C C C Specification for ancillary components for masonry Part 2: Lintels C Specification for ancillary components for masonry Part 3: Bed joint reinforcement of steel meshwork Admixtures for concrete, mortar and grout Part 2: Concrete admixtures Definitions, requirements, conformity, marking and labelling C C Page 6

7 EN 934 4: EN 998 1: EN 998 2: Admixtures for concrete, mortar and grout Part 4: Admixtures for grout for prestressing tendons Definitions, requirements, conformity, marking and labelling C Specification for mortar for masonry Part 1: Rendering and plastering mortar C Specification for mortar for masonry Part 2: Masonry mortar C Page 7

8 Available standards not yet cited in the OJ: 32 EN 12209: EN : A1: 2001/A2: EN :2000/A1: EN 13164:2001/A1: EN 13165:2001/A1: EN 13166:2001/A1: EN 13167:2001/A1: EN 13168:2001/A1: EN 13169:2001/A1: EN 13171:2001/A1: EN : EN : EN : EN 13561: EN : EN 13659: EN : EN 13830: EN 13964: EN : EN 14216: EN 14396: EN 14411: EN :1997/A1: EN : EN 197 1:2000/A1: Building hardware Locks and latches Mechanically operated locks, latches and locking plates Requirements and test methods Fixed firefighting systems components for sprinkler and waterspray systems Part 1: Sprinklers Small wastewater treatment systems for up to 50 PT Part 1: Prefabricated septic tanks Thermal insulation products for buildings Factory made products of extruded polystyrene foam (XPS) Specification Thermal insulation products for buildings Factory made rigid polyurethane foam (PUR) products Specification Thermal insulation products for buildings Factory made products pf phenolic foam (PF) Specification Thermal insulation products for buildings Factory made cellular glass (CG) products Specification Thermal insulation products for buildings Factory made wood wool (WW) products Specification Thermal insulation products for buildings Factory made products of expanded perlite (EPB) Specification Thermal insulation products for buildings Factory made wood fibre (WF) products Specification Structural bearings Part 4: Roller bearings Structural bearings Part 6: Rocker bearings Structural bearings Part 7: Spherical and cylindrical PTFE bearings External blinds Performance requirements including safety Fixed firefighting systems Foam systems Part 1: Requirements and test methods for components Shutters Performance requirements including safety Terrazzo tiles Part 1: Terrazzo tiles for internal use Curtain walling Product standard Suspended ceilings Requirements and test methods Binders for magnesite screeds Caustic magnesia and magnesium chloride Part 1: Definitions, requirements Cement Composition, specifications and conformity criteria for very low heat special cements Fixed ladders for manholes Ceramic tiles Definitions, classification, characteristics and marking (ISO 13006:1998, modified) Road marking materials Retroreflecting road studs Part 1: Initial performance requirements Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 4: Structural bonding Cement Part 1: Composition, specifications and conformity criteria for common cements Page 8

9 EN 197 4: EN 413 1: EN 442 1:1995/A1: EN 771 5: EN 934 3: EN 997: Cement Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements Masonry cement Part 1: Composition, specifications and conformity criteria Radiators and convectors Part 1: Technical specifications and requirements Specification for masonry units Part 5: Manufactured stone masonry units Admixtures for concrete, mortar and grout Part 3: Admixtures for masonry mortar Definitions, requirements, conformity, marking and labelling WC pans and WC suites with integral trap Page 9

10 Standards not yet available: 32 EN : EN : EN : EN : EN 13616: EN : EN 14041: EN : EN : EN 302 4: EN 485 2: pren pren pren pren rev pren pren pren pren pren pren pren pren pren pren Fixed firefighting systems Components for gas extinguishing systems Part 4: Requirements and test methods for container valve assemblies and their actuators Smoke and heat control systems Part 1: Specification for smoke barriers Slate and stone products for discontinuous roofing and cladding Part 1: Product specification Lightweight aggregates Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications Overfill prevention devices for static tanks for liquid petroleum fuels Terrazzo tiles Part 2: Terrazzo tiles for external use Resilient, textile and laminate floor coverings Essential characteristics High strength structural bolting for preloading Part 4: System HV Hexagon bolt and nut assemblies Chimneys Requirements for metal chimneys Part 2: Metal liners and connecting flue pipes Adhesives for load bearing timber structures Test methods Part 4: Determination of the effects of wood shrinkage on the shear strength Aluminium and aluminium alloys Sheet, strip and plate Part 2: Mechanical properties Glass in building Coated glass Part 4: Evaluation of conformity/product standard Glass in building Thermally toughened soda lime silicate safety glass Part 2: Evaluation of conformity/product standard Glass in building Chemically strengthened soda lime silicate glass Part 2: Evaluation of conformity/product standard Fibre cement flat sheets Product specification and test methods Sanitary appliances Specification for whirlpool baths Prefabricated accessories for roofing Permanently fixed roof ladders Product specification and test methods Glass in building Thermally toughened borosilicate safety glass Part 2: Evaluation of conformity/product standard Geosynthetic barriers Characteristics required for use in the construction of reservoirs and dams Geosynthetic barriers Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures Geosynthetic barriers Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment Thermal insulating materials and products In situ formed expanded clay lightweight aggregate products Part 1: Specification for the loose fill products before installation Glass in building Basic alkaline earth silicate glass products Part 2: Evaluation of conformity/product standard Metal framing components for gypsum plasterboard systems Definitions, requirements and test methods Thermal insulation products for buildings In situ thermal insulation formed from expanded perlite (EP) products Part 1: Specification for bonded and loose fill products before installation Page 10

11 pren pren pren pren pren 492 rev pren 494 rev pren Thermal insulation products for buildings In situ thermal insulation formed from exfoliated vermiculite (EV) products Part 1: Specification for bonded and loosefill products before installation Glass in building Special basic products Part 1 2: Borosilicate glasses Evaluation of conformity/product standard Glass in building Special basic products Part 2 2: Glass ceramics Evaluation of conformity/product standard Glass in building Heat strengthened soda lime silicate glass Part 2: Evaluation of conformity/product standard Fibre cement slates and fittings Product specification and test methods Fibre cement profiled sheets and fittings Product specification and test methods Glass in building Basic soda lime silicate glass products Part 9: Evaluation of conformity/product standard Page 11

12 Formal Vote closed with failed voiting: 15 pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren Geosynthetic barriers Characteristics required for use in the construction of canals Geosynthetic barriers Characteristics required for use in the construction of solid waste storage and disposal sites, and storages for hazardous solid materials Thermal insulation products for buildings In situ formed loose fill mineral wool (MW) products Part 1: Specification for the loose fill products before installation Timber structures Glued laminated timber Requirements Timber structures Strength graded structural timber with rectangular cross section Part 1: General requirements Timber structures Strength graded structural timber with rectangular cross section Part 2: Machine Grading Additional requirements for initial type testing Thermal insulation products for building equipment and industrial installations Factory made mineral wool (MW) products Specification Thermal insulation products for building equipment and industrial installations Factory made flexible elastomeric foam (FEF) products Specification Thermal insulation products for building equipment and industrial installations Factory made cellular glass (CG) products Specification Thermal insulation products for building equipment and industrial installations Factory made calcium silicate (CS) products Specification Thermal insulation products for building equipment and industrial installa tions Factory made extruded polystyrene foam (XPS) products Specifi cation Thermal insulation products for building equipment and industrial installations Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products Specification Thermal insulation products for building equipment and industrial installations Factory made products of expanded polystyrene (EPS) Specification Thermal insulation products for building equipment and industrial installations Factory made polyethylene foam (PEF) products Specification Thermal insulation products for building equipment and industrial installations Factory made phenolic foam (PF) products Specification Page 12

13 Formal Vote or UAP closed, waiting for voting report: 25 EN :1999/prA EN :1999/A1: EN 12809:2001/prA EN 12815:2001/prA EN 13229:2001/prA EN 13240:2001/prA pren pren pren pren pren pren pren pren pren pren pren pren rev pren pren pren pren pren pren pren Pipes and fittings of longitudinally welded hot dip galvanized steel pipes with spigot and socket for waste water systems Part 1: Requirements, testing, quality control Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems Part 1: Requirements, testing, quality control Residential independent boilers fired by solid fuel Nominal heat output up to 50 kw Requirements and test methods Residential cookers fired by solid fuel Requirements and test methods Inset appliances including open fires fired by solid fuels Requirements and test methods Roomheaters fired by solid fuel Requirements and test methods Precast concrete products Hollow core slabs Natural stone products Modular tiles Requirements Natural stone products Slabs for floors and stairs Requirements Precast concrete products Masts and poles Precast concrete products Ribbed floor elements Precast concrete products Linear structural elements Plastics Unplasticized poly(vinyl chloride) (PVC U) profiles for building applications Part 1: Designation of light coloured profiles Structural bearings Part 3: Elastomeric bearings Structural bearings Part 5: Pot bearings Binders, composite binders and factory made mixtures for floor screeds based on calcium sulphate Part 1: Definitions and requirements Precast concrete products Special roof elements Wood based panels for use in construction Characteristics, evaluation of conformity and marking Joint fillers and sealants Part 1: Specifications for hot applied sealants Gypsum plasterboard products from reprocessing Definitions, requirements and test methods Timber structures Product requirements for prefabricated trusses using punched metal plate fasteners Timber structures Structural laminated veneer lumber Requirements Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 5: Concrete injection Grease separators Part 1: Principles of design, performance and testing, marking and quality control High pressure decorative laminates (HPL) Sheets based on thermosetting resins (Usually called Laminates) Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes Page 13

14 Undergoing Formal Vote or UAP: 15 EN 858 1:2002/prA1: pren rev EC pren rev EC pren rev EC pren pren pren pren pren pren pren pren pren pren pren Separator systems for light liquids (e.g. oil and petrol) Part 1: Principles of product design, performance and testing, marking and quality control Steel for the reinforcement of concrete Weldable reinforcing steel General Stainless steels Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general and construction purposes Stainless steels Part 3: Technical delivery conditions for semi finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general and construction purposes Flexible sheets for waterproofing Reinforced bitumen sheets for roof waterproofing Definitions and characteristics Flexible sheet for waterproofing Plastic and rubber sheets for roof waterproofing Definitions and characteristics Preformed plasterboard cornices Definitions, requirements and test methods Wood flooring Characteristics, evaluation of conformity and marking Shower enclosures Functional requirements and test methods Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards Definitions, requirements and test methods Baths for domestic purposes Shower trays for domestic purposes Natural stone products Finished products, slabs for cladding Specifications Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 2: Surface protection systems for concrete Gypsum plasterboards Definitions, requirements and test methods Page 14

15 Received in CMC for CEN Formal Vote preparation: 39 pren EC pren EC pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren Hot rolled products of structural steels Part 1: General technical delivery conditions Joints for the connection of steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption Smoke and heat control systems Part 6: Pressure differential systems Kits Workshop fabricated steel tanks Part 2: Horizontal cylindrical single skin and double skin tanks for the above ground storage of flammable and nonflammable water polluting liquids Precast concrete foundation piles Road equipment Fixed, vertical road signs Part 2: Transilluminated traffic bollards Fixed, vertical road traffic signs Part 3: Delineator posts and retroreflectors Vertical road traffic signs Part 1: Variable message signs Chimneys System chimneys with clay/ceramic flue liners Part 1: Requirements and test methods for sootfire resistance Chimneys Clay/ceramic outer walls for system chimneys Requirements and test methods Free standing chimneys Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners Gypsum binders and gypsum plasters Part 1: Definitions and requirements Requirements and test methods for thermoplastic tanks made from blow moulded polyethylene, rotational moulded polyethylene and anionic polymerization of polyamide 6 for the above ground storage of domestic heating oils and diesel fuels Wall hung urinals Functional requirements and test methods Welding consumables General product standard for filler metals and fluxes for fusion welding of metallic materials Metal lath and beads Definitions, requirements and test methods Part 1: Internal plastering Metal lath and beads Definitions, requirements and test methods Part 2: External rendering Flexible sheets for waterproofing Definitions and characteristics of underlays Part 1: Underlays for discontinuous roofing Flexible sheets for waterproofing Definitions and characteristics of underlays Part 2: Underlays for walls Concrete pavements Part 3: Specifications for dowels to be used in concrete pavements Prefabricated gypsum wallboard panels Definitions, requirements and test methods Gypsum plasterboard thermal/acoustic insulation composite panels Definitions, requirements and test methods Flexible sheets for waterproofing Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet Definitions and characteristics Flexible sheets for waterproofing Bitumen damp proof sheets including bitumen basement tanking sheets Definitions and characteristics Flexible sheets for waterproofing Bitumen water vapour control layers Definitions and characteristics Page 15

16 pren pren pren pren pren pren pren pren pren pren pren CSB99003 pren pren pren Precast concrete products Precast concrete garages Part 1: Reinforced garages monolithic or consisting of elements Product properties and performances Flexible sheets for waterproofing Plastic and rubber vapour control layers Definitions and characteristics Joint fillers and sealants Part 2: Specifications for cold applied sealants Glass in building Thermally alkaline earth silicate safety glass Part 2: Evaluation of conformity Underground fire hydrants, surface boxes and covers Windows and pedestrian doorsets Product standard Part 1: Windows and external pedestrian doorsets without resistance to fire and external fire characteristics Pillar fire hydrants Road traffic noise reducing devices Specifications High strength structural bolting for preloading Part 1: General requirements Bidets Functional requirements and test methods Stretched ceilings Requirements and test methods Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 10: Mandated requirements Fly ash for concrete Part 1: Definition, specifications and conformity criteria Concrete roofing tiles and fittings for roof covering and wall cladding Product specifications Page 16

17 Received in CMC for UAP preparation: 14 EN :2000/prA EN 12591:1999/prA EN :2001/prA EN 13249:2000/prA pren pren pren pren pren pren pren pren pren 54 10/prA pren 54 11/prA Fixed firefighting systems Components for gas extinguishing systems Part 7: Requirements and test methods for nozzles for CO2 systems Bitumen and bituminous binders Specifications for paving grade bitumens Copper and copper alloys Seamless, round copper tubes for air conditioning and refrigeration Part 1: Tubes for piping systems Geotextiles and geotextile related products Characteristics required for use in the construction of roads and other trafficked areas (excluding railways and asphalt inclusion) Free standing chimneys Part 5: Material for brick liners Product specification Bitumen and bituminous binders Framework for specifying cationic bituminous emulsions Bitumen and bituminous binders Framework specification for polymer modified bitumens Plastics piping systems Soil and waste discharge systems within the building structure Performance characteristics for pipes, fittings and their joints Plastics piping systems Non pressure drainage and sewerage systems buried in ground Performance characteristics for pipes, fittings and their joints Plastics piping systems Buried and above ground systems for water and other fluids under pressure Performance characteristics for pipes, fittings and their joints Plastics piping systems Systems for hot and cold water not intended for human consumption Performance characteristics for pipes, fittings and their joints Prefabricated accessories for roofing Individual rooflights of plastics with upstands Product specification and test methods Fire detection and fire alarm systems Part 10: Flame detectors Fire detection and fire alarm systems Part 11: Manual call points Page 17

18 Passed CEN Enquiry and not in CMC for Formal Vote: Fire detection and alarm systems Part 15: Point type multisensor (light and heat) fire detectors (ISO/DIS :2002) EN 1790:1998/prA EN 1871:2000/prA EN 54 4:1997/prA EN 54 7:2000/prA EN 877:1999/prA pren rev EC pren rev pren EC pren EC pren pren 1125 rev pren pren pren pren pren rev pren 1304 rev pren pren pren pren pren pren pren pren Road marking materials Preformed road markings Road marking materials Physical properties Fire detection and fire alarm systems Part 4: Power supply equipment Fire detection and fire alarm systems Part 7: Smoke detectors Point detectors using scattered light, transmitted light, transmitted or ionization Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings Requirements, test methods and quality assurance Steels for quenching and tempering Part 1: General technical delivery conditions Light transmitting single skin profiled plastics sheeting for internal and external roofing, wall cladding and ceiling finishes Part 1: General requirements and test methods Prestressing steels Part 1: General requirements Zinc and zinc alloy coated prestressing steel wires and strands Glass in building Glass blocks and glass paver units Part 2: Evaluation of conformity Building hardware Panic exit devices operated by a horizontal bar, for use on escape routes Requirements and test methods Smoke and heat control systems Part 10: Power supplies Smoke and heat control systems Part 4: Fire and smoke control installations Kits Small wastewater treatment systems for up to 50 PT Part 3: Packaged and/or site assembled domestic wastewater treatment plants Prefabricated reinforced components of autoclaved aerated concrete Pigments for the colouring of building materials based on cement and/or lime Specifications and methods of test Clay roofing tiles and fittings Product definitions and specifications Chimneys System chimneys with clay/ceramic flue liners Part 2: Requirements and test methods under wet conditions Bituminous mixtures Material specifications Part 1: Asphalt concrete Bituminous mixtures Material specifications Part 2: Asphalt concrete for very thin layers Bituminous mixtures Material specification Part 3: Soft asphalt Bituminous mixtures Material specification Part 4: Hot rolled asphalt Bituminous mixtures Material specifications Part 5: Stone mastic asphalt Bituminous mixtures Material specifications Part 6: Mastic asphalt Bituminous mixtures Material specifications Part 7: Porous asphalt (PA) Page 18

19 pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren Road restraint systems Part 5: Product requirements, durability and evaluation of conformity Silica fume for concrete Part 1: Definitions, requirements and conformity criteria Structural bearings Part 8: Guide bearings and restrain bearings Water supply Flexible hoses (elastomeric or plastic material hose with or without metallic or synthetic braiding) Product standard Building hardware Electrically controlled panic exit systems for use on escape routes Requirements and test methods Building hardware Electrically controlled emergency exit systems for use on escape routes Requirements and test methods Fibrous gypsum plaster products Definitions, requirements and test methods Wood and wood based materials in stair components Requirements Jointing materials for gypsum plasterboards Definitions, requirements and test methods Joint fillers and sealants Part 3: Specification for preformed joint seals Wood poles for overhead lines Requirements Gypsum elements for suspended ceilings Definitions, requirements and test methods Communal washing troughs for domestic purposes Thermal insulating products for buildings In situ formed sprayed rigid polyurethane foam (PUR) products Part 1: Specification for the rigid foam spray system before installation Thermal insulating products for buildings In situ formed dispensed rigid polyurethane foam (PUR) products Part 1: Specification for the rigid polyurethane dispense system before installation Thermal insulating products for building equipment and industrial installations In situ formed dispensed rigid polyurethane foam (PUR) products Part 1: Specification for the rigid foam dispensed system before installation Thermal insulating products for building equipment and industrial installations In situ formed sprayed rigid polyurethane foam (PUR) products Part 1: Specification for the rigid foam spray system before installation Glass in building Laminated glass and laminated safety glass Evaluation of conformity Chimneys System chimneys with plastic flue liners Requirement and test methods Self supporting double skin metal faced insulating sandwich panels Factory made products Specification Timber structures Strength graded structural timber with round cross section Requirements Timber structures Connectors Requirements Mechanical fasteners for gypsum plasterboard systems Definitions, requirements and tests methods Specification for landing valves for dry riser and other dry main systems for fire fighting in buildings Timber structures Fasteners Requirements Self contained smoke alarms Calcium aluminate cement Composition, specifications and conformity criteria Page 19

20 pren pren pren pren pren pren pren pren pren pren pren pren pren 179 rev pren 301 rev pren pren pren Adhesives for non pressure thermoplastic piping systems Specifications Sanitary appliances Wash basins Functional requirements and test methods Flexible sheets for waterproofing Reinforced bitumen sheets for waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles Definitions and characteristics Timber structures Prefabricated wall, floor and roof elements Part 1: Product requirements Self supporting metal sheet for roofing and wall cladding Fully supported metal sheet and strip for roof coverings and wall finishings Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels Adhesives for thermoplastic piping systems for fluids under pressure Specifications Fixed firefighting systems Water spray systems Design annd installation Precast concrete products Stairs Precast concrete products Box culverts Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 3: Structural and non structural repair Building hardware Emergency exit devices operated by a lever handle or push pad, for use on escape routes Adhesives, phenolic and aminoplastic, for load bearing timber structures Classification and performance requirements Fire detection and fire alarm systems Part 17: Short circuit isolators Fire detection and fire alarm systems Part 18: Requirements and test methods for input/output devices for use on the transmission paths of fire detection and fire alarm systems Admixtures for concrete, mortar and grout Part 5: Admixtures for sprayed concrete Definitions, requirements and conformity Page 20

21 Undergoing CEN Enquiry: 27 EN 54 2:1997/prA pren pren rev pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren pren 1806 rev pren pren 544 rev pren ISO pren ISO pren ISO pren ISO pren ISO Fire detection and fire alarm systems Part 2: Control and indicating equipment Fixed firefighting systems Components for gas extinguishing systems Part 5: Requirements and test methods for high and low pressure selector valves and their actuators Fixed firefighting systems Components for gas extinguishing systems Part 6: Requirements and test methods for non electrical disable devices Fixed firefighting system Components for gas extinguishing systems Part 8: Requirements and test methods for connectors Smoke and heat control systems Part 7: Smoke control ducts Smoke and heat control systems Part 8: Specification for smoke control dampers Bitumen and bituminous binders Specifications for hard paving grade bitumens Fibres for concrete Part 1: Steel fibres Definition, specifications and conformity Fibres for concrete Part 2: Polymer fibres Definition, specification and conformity Surfaces for sports areas Specification for indoor surfaces for multi sports use Flexible sheets for waterproofing Plastic and rubber damp proof courses Definitions and characteristics Solid wood panelling and cladding Characteristics, evaluation of conformity and marking Light weight fill and insulation products for civil engineering applications Factory made products of expanded polystyrene (EPS) Specification Thermal insulation of road and railways and embankment filling Factory made products of extruded polystyrene foam (XPS) Specification Roof coverings Continuous rooflights of plastics with upstands Classification, requirements and test methods Roof covering products for discontinuous laying and products for wall cladding Rigid underlays for discontinuous roofing Definitions and characteristics Flexible sheets for waterproofing Bitumen damp proof courses Definitions and characteristics Products and systems for the protection and repair of concrete structures Definitions, requirements, quality control and evaluation of conformity Part 6: Anchoring of reinforcing steel bar Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods Corrugated bitumen sheets Product specification and test methods Bitumen shingles with mineral and/or synthetic reinforcements Product specification and test methods Industrial valves Ball valves of thermoplastic materials (ISO/DIS 16135:2004) Industrial valves Butterfly valves of thermoplastic materials (ISO/DIS 16136: 2004) Industrial valves Check valves of thermoplastic materials (ISO/DIS 16137: 2004) Industrial valves Diaphragm valves of thermoplastic materials (ISO/DIS 16138: 2004) Industrial valves Gate valves of thermoplastic materials (ISO/DIS 16139:2004) Page 21