Annex of the certificate (Page 1/7) Accreditation Scope
|
|
|
- Oscar Gilmore
- 5 years ago
- Views:
Transcription
1 Annex of the certificate (Page 1/7) As a Testing Laboratory Address: Organize Sanayi Bölgesi 10. Cadde No: 4 Melikgazi KAYSERİ/TÜRKİYE Phone : Fax : kayserilab@tse.org.tr Website : Glass in buildings Insulating glass units Generalities, dimensional tolerances and rules for the system description Long term test method and requirements for moisture penetration (Applicable for only desiccant in bulk) TS EN EN TS EN EN Glass in buildings Adhesion TS EN EN Glass in buildings Moisture vapour transmission rate TS EN EN Glass in buildings Fogging test TS EN EN Glass in buildings Moisture penetration index TS EN EN Glass in buildings Testing and classification resistance against manual attack TS EN 356 EN 356 Glass in buildings Energy conservation and heat retention - Radiation properties: Light transmittance TS EN 410 EN 410 and reflectance Glass in buildings Energy conservation and heat retention - Radiation properties: Solar energy TS EN 410 EN 410 characteristics Glass in buildings Determination of thermal transmittance (U value) - Calculation method TS EN 673 EN 673 Glass in buildings Pendulum test - Impact test method and classification for flat glass TS EN EN Glass in buildings Glazing and airborne sound insulation TS EN EN TS EN ISO ISO (ISO 140-3)
2 Annex of the certificate (Page 2/7) Glass in building- Glass in building- Heat soaked thermally toughened Heat soaked thermally toughened Heat strengthened glass Heat strengthened glass borosilicate safety glass borosilicate safety glass Mechanical strength TS EN EN Fragmentation test TS EN EN Mechanical strength TS EN EN Fragmentation test TS EN EN Mechanical strength TS EN EN Fragmentation test TS EN EN Mechanical strength TS EN EN Fragmentation test TS EN EN
3 Annex of the certificate (Page 3/7) alkaline earth silicate alkaline earth silicate Mechanical strength TS EN EN Fragmentation test TS EN EN Glass in building Four point bending strength test TS EN EN Windows and Doors Air permeability test and classification TS EN 1026 EN 1026 TS EN EN Windows and Doors Resistance to wind load test and classification TS EN EN TS EN EN Windows and Doors Watertightness test and classification TS EN 1027 EN 1027 TS EN EN Windows and Doors Resistance to repeated opening and closing test and classification TS EN 1191 EN1191 TS EN EN TS EN EN TS EN EN Windows and Doors Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors TS EN ISO EN ISO ISO
4 Annex of the certificate (Page 4/7) Windows Operating forces test and classification TS EN EN TS EN EN Windows Determination of the resistance to racking TS EN Windows Windows Windows Determination of the resistance to static torsion Soft and heavy body impact test, safety requirements and classification Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows EN TS EN EN TS EN EN TS EN ISO EN ISO ISO Doors Operating forces test and classification TS EN Hinged and Pivoted Doors Hinged and Pivoted Doors Windows and Curtain Walling Doors, Blinds and Shutters Determination of the resistance to vertical load test and classification Determination of the resistance to static torsion test and classification Determination of the resistance to soft and heavy body impact for doors test and classification EN TS EN EN TS EN 947 EN 947 TS EN 1192 EN 1192 TS EN EN TS EN 948 EN 948 TS EN 1192 EN 1192 TS EN EN TS 6007 EN 949 EN 949 TS EN 1192 EN 1192
5 Annex of the certificate (Page 5/7) Door leaves Determination of the resistance to hard body impact test and classification Door Leaves General and local flatness - Pedestrian doorsets, windows, curtain walling, grilles and shutters Building Elements Building Elements Building Elements Windows, Doors and Shutters Windows, Doors and Shutters Construction products and building elements Measurment method Burglar resistance - Test method and classification for the determination of resistance under dynamic loading Laboratory measurement of sound insulation of building elements - Part 2: Measurement of airborne sound insulation Rating of sound insulation in buildings and of building elements - Part 1: Airborne sound insulation Thermal insulation-determination of steady-state thermal transmission properties-calibrated and guarded hot box Thermal performance of windows, doors and shutters -Calculation of thermal transmittance - Part 1: Simplified method Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 2: Numerical method for frames Fire resistance tests Part 1: General requirements TS EN 950 EN 950 TS EN 1192 EN 1192 TS EN 952 TS EN 1629+A1 EN 1629+A1 TS EN 1627 EN 1627 TS EN ISO EN ISO (EN ISO 140-3) ISO (ISO 140-3) TS EN ISO EN ISO TS EN ISO 8990 EN ISO 8990 ISO 8990 TS EN ISO EN ISO TS EN ISO EN ISO TS EN EN
6 Annex of the certificate (Page 6/7) Door and shutter assemblies, openable windows and elements of building hardware Lift Landing Doors Non-Loadbearing Elements Construction products and building elements Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware - Part 1: Fire resistance test for door and shutter assemblies and openable windows Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test Fire resistance tests for non- loadbearing elements- Part 1:Walls Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services Test method for the determination of resistance under static loading and classification TS EN A1 EN A1 TS EN EN TS EN EN TS EN EN TS EN 1628+A1 EN 1628+A1 TS EN 1627 EN 1627 Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance Test method for the determination of resistance to manual burglary attempts and classification TS EN 1630+A1 EN 1630+A1 TS EN 1627 EN 1627 Flush wood door wings, Steel doors with burglar resistance Steel doors with burglar resistance, paints and varnishes Glue coating failure test TS 675 Test method for the determination of paint TS EN ISO 2808 thickness (Paints and varnishes - EN ISO 2808 Determination of film thickness)
7 Annex of the certificate (Page 7/7) Steel doors with burglar resistance, paints and varnishes Metallic Materials Steel doors with burglar resistance Determination of the degree of adhesion of the paint to the surface (Paints an varnishes - Cross-cut test) Tensile testing - Part 1: Method of test at room temperature (1kN - 60kN) Inspection with eye Measurment inspection End of Scope TS EN ISO 2409 EN ISO 2409 TS EN ISO EN ISO Dr. H. İbrahim ÇETİN Secretary General
8 Annex of the certificate (Page 1/4) / Additional assessment document for this scope : EA 2/17 As a Testing Laboratory Address: Organize Sanayi Bölgesi 10. Cadde No: 4 Melikgazi KAYSERİ/TÜRKİYE Phone : Fax : kayserilab@tse.org.tr Website : Regulation (EU) No 305/2011 Construction products Commission Decision Product Family, Product / Intended Use Technical Requirements, Standards / Body Function 95/467/EC Gypsum products (2/4) : - Plasterboards, blocks, ceiling elements and gypsum plasters, fibrous gypsum plasters casts, including relevant ancillary products (in walls, partitions or ceilings, as relevant, intended for fire protection of structural elements and/or fire compartmentation in buildings 98/436/EC Roof coverings, roof lights, roof windows and ancillary products (1/6) : - Factory-bonded composite or sandwich panels (for uses subject to resistance to fire regulations ) 98/436/EC Roof coverings, rooflights, roof windows and ancillary products (6/6) : - Roof windows (for uses other than those specified in families (1/6), (2/6), (3/6), (4/6), (5/6)). 98/437/EC Internal and external wall and ceiling finishes (1/5): - Panels (as internal or external finishes, as complete elements, used for fire protection of walls or ceilings) TS EN 12859:2011 EN 12859:2011 TS EN :2009 EN :2008 TS EN 520:2010+A1:2010 EN 520:2004+A1:2009 TS EN 14509:2014 EN 14509:2013 TS EN :2006+A1:2010 EN :2006+A1:2010 TS EN :2006+A2:2016 EN :2006+A2:2016 TS EN 438-7:2007 EN 438-7:2005
9 Annex of the certificate (Page 2/4) / Additional assessment document for this scope : EA 2/17 Regulation (EU) No 305/2011 Construction products Commission Decision 99/93/EC 99/93/EC 2000/245/EC Product Family, Product / Intended Use Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Doors and gates (with or without related hardware) (other declared specific uses and/or uses subject to other specific requirements, in particular noise, energy, tightness and safety-in-use Doors, windows, shutters, blinds, gates and related building hardware (1/1) : - Windows (with or without related hardware) (any other). Flat glass, profiled glass and glass-block products (4/6): - Insulating glass units (for other usages liable to present "safety-in-use" risks and subject to such regulations) Technical Requirements, Standards / Body Function TS EN :2006+A1:2010 EN :2006+A1:2010 TS EN :2006+A2:2016 EN :2006+A2:2016 TS EN :2006+A1:2010 EN :2006+A1:2010 TS EN :2006+A2:2016 EN :2006+A2:2016 TS EN :2005 +A2:2011 EN :2005 +A2:2010
10 Annex of the certificate (Page 3/4) / Additional assessment document for this scope : EA 2/17 Regulation (EU) No 305/2011 Construction products Commission Decision 2000/245/EC 2000/245/EC Product Family, Product / Intended Use Flat glass, profiled glass and glass-block products (4/6) : - Flat or curved glass panels (for other uses liable to present "safety-in-use" risks and subject to such regulations) Flat glass, profiled glass and glass-block products (5/6): - Insulating glass units (for uses relating to energy conservation and/or noise reduction) Technical Requirements, Standards / Body Function TS EN :2010 EN :2008 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2007 EN :2005 TS EN :2007 EN :2005 TS EN 14449:2007 EN 14449:2005 TS EN 14449/AC:2006 EN 14449:2005/AC:2005 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN 572-9:2006 EN 572-9:2004 TS EN :2005 +A2:2011 EN :2005 +A2:2010
11 Annex of the certificate (Page 4/4) / Additional assessment document for this scope : EA 2/17 Regulation (EU) No 305/2011 Construction products Commission Decision 2000/245/EC Product Family, Product / Intended Use Flat glass, profiled glass and glass-block products (5/6): - Flat or curved glass panels (for uses relating to energy conservation and/or noise reduction) End of Scope Technical Requirements, Standards / Body Function TS EN :2010 EN :2008 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2007 EN :2005 TS EN :2007 EN :2005 TS EN 14449:2007 EN 14449:2005 TS EN 14449/AC:2006 EN 14449:2005/AC:2005 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN :2006 EN :2004 TS EN 572-9:2006 EN 572-9:2004 Dr. H. İbrahim ÇETİN Secretary General
Annex of the certificate (Page 1/5) Accreditation Scope
Annex of the certificate (Page 1/5) Accreditation Scope As a Testing Laboratory Tested Materials / Products EX LABORATORY Metallic materials Construction products Address: Küçük Çiğli Mh. 8780/1 Sk. No:5
Contents EN :2006+A2:2016 (E)
Contents European foreword... 6!Introduction"... 8 1 Scope... 9 2 Normative references... 10 2.1 Classification standards... 10 2.2 Test and calculation standards... 10 2.3 Other standards... 12 3 Terms
This annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation
SKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie
Normative document: EN ISO/IEC 7025:2005 This annex is valid from: 24-0-208 to 0-2-202 Replaces annex dated: 06-2-206 Location(s) where activities are performed under accreditation Head Office Poppenbouwing
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Plot 4 Halesfield 2 Telford Shropshire TF7 4QH Contact: Mr M Wass
CEN/TC 33 - Doors, windows, shutters, building hardware and curtain walling. EN 107:1980 Methods of testing windows - Mechanical test 89/106/EEC
C/TC 33 - Doors, windows, shutters, building hardware and curtain walling Standard reference Title Directive 107:1980 Methods of testing windows - Mechanical test 129:1984 130:1984 179:2008 477:1995 478:1995
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Montrose House Lancaster Road Cressex Business Park High Wycombe Buckinghamshire HP12 3PY Contact: Mr D McKenna Tel:+ 44 (0)1494 452713 E-Mail: david.mckenna@buildcheck.co.uk Website: www.buildcheck.co.uk
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Exova (UK) Limited trading as Warrington Certification Issue No: 033 Issue date: 06 November 2017 to provide product conformity Holmesfield
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17065:2012 to provide product conformity 20 Park Street Princes Risborough Buckinghamshire HP27 9AH Contact: Ian Woodhouse Tel: +44
Window and Door Standards for Performance and Security. Russell Day Senior Technical Officer Glass and Glazing Federation
Window and Door Standards for Performance and Security Russell Day Senior Technical Officer Glass and Glazing Federation The Standards BS EN 14351-1:2006+A2:2016 Windows and doors. Product standard, performance
Notification of a Body pursuant to article 10 of the Construction Products Directive 89/106/EEC
Notification of a Body pursuant to article 10 of the Construction Products Directive 89/106/EEC From : Ministry of VROM - Cluster Bouwkwaliteit Rijnstraat 8 P.O. Box 30941 2500 GX Den Haag Netherlands
The Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 19 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
هيي ة الا شغال العامة ا دارة الجودة و السلامة قسم المختبرات - وحدة مراقبة المختبرات. Turkish Standards Institution Laboratories (TSE) - Turkey
Turkish Standards Institution Laboratories (TSE) - Turkey Tel: 44950200 Fax: 44951200 e. mail: Quality&Safety@ashghal.gov.qa 106 Testing Field/ Material Page Testing Field/ Material Page Number Number
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bucknalls Lane Garston Watford Hertfordshire WD25 9BA Contact: Alvaro Enquita-Gonzalez Tel: +44 (0)1923-665350 Fax: +44 (0)1923-665452 E-Mail:
The Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 17 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Lindenlaan 41 6584 AC Molenhoek (Limburg) The Netherlands Location(s) where activities are performed under accreditation Head Office Location Abbreviation/ location code Main Location Lindenlaan 41 6584
Construction Products Directive
Construction Products Directive Evaluation of conformity of Coated glass to he N 1096-4 ( September 2006) G E P V P, T H E E U R O P E A N A S S O C I AT I O N O F F L AT G L A S S M A N U FA C T U R E
Firetect C. Fire protective products: Fire protective board
European Technical Assessment ETA-14/0293 Of /0 /201 Trade name of the construction product Product family to which the construction product belongs Manufacturer Manufacturing plants This European Technical
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
nnex to declaration accreditation (scope accreditation) egistration number: L 015 This annex is valid from: 01-08-2018 to 01-09-2020 eplaces annex dated: 21-03-2018 Location(s) where activities are performed
SVENSK STANDARD SS-EN :2006
SVENSK STANDARD SS-EN 14351-1:2006 Fastställd 2006-04-07 Utgåva 1 Fönster och dörrar Produktstandard, funktionsegenskaper Del 1: Fönster och ytterdörrar utan egenskaper för brandmotstånd och/eller rökgasläckage
Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity
ÍST EN 1279-5:2005+A2:2010 Fellur úr gildi 15.11.2010 ICS: 81.04 Gler í byggingar - Einangrunargler - 5. hluti: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity
CE marking of industrial doors under the CPR Michael Skelding, Secretary and General Manager Door and Hardware Federation
CE marking of industrial doors under the CPR 2011 Michael Skelding, Secretary and General Manager Door and Hardware Federation Who is the DHF? DHF represents manufacturers & installers of: Pedestrian doors
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK to provide product conformity Stocking Lane High Wycombe Buckinghamshire HP14 4ND Contact: Mr Alan Gower Tel: +44 (0)1494 569700 Fax: +44
Construction Products Directive
Construction Products Directive Evaluation of conformity of Heat soaked thermally toughened soda lime silicate safety glass to he N 14179-2 ( September 2006) G E P V P, T H E E U R O P E A N A S S O C
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Unit 3 Wednesbury One Black Country New Road Wednesbury West Midlands
Reference F-IAB-012 Page Page 1 of 6 Revision 2. Please complete all sections and submit electronically to
Agrément Form Title WINDOW ENERGY PERFORMANCE (WEP) APPLICATION FORM Reference F-IAB-012 Page Page 1 of 6 Revision 2 Please complete all sections and submit electronically to anne.clarke@nsai.ie Section
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17065:2012 to provide product conformity certification Wonersh House The Guildway Old Portsmouth Road Guildford Surrey
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of Accreditation 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PO Box 26385 Corner of 46th and 47th Streets Jebel Ali Industrial Area 1 Dubai United Arab Emirates Contact: Mr
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
Fire and Security Products and Services
* www.redbooklive.com Fire and Security Products and Services Making LPCB Approval work for you Not all fire and security products and services on the market can be trusted in the event of a fire or attempted
Schedule of Accreditation
Schedule of Accreditation Organisation Name Trading As INAB Reg No 6023 Contact Name Address BRE Global Assurance (Ireland) Ltd David Gall Contact Phone No +353 1 882 4344 Email Website Accreditation Standard
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Holmesfield Road Warrington Cheshire WA1 2DS Contact: Mr D Brown Tel: +44 (0)1925-655116 Fax: +44 (0)1925-655419 E-Mail: david.brown@exova.com Website:
The Laboratory is qualified to update standards identifying the test procedures. Test procedure/ method identification
Testing laboratory locations: 1. Testing Laboratory in Prague (0100) Prosecká 811/76a, 190 00 Praha 9 2. Testing Laboratory in České Budějovice (0200) 3. Testing Laboratory in Plzeň (0300) Zahradní 15,
The Laboratory is qualified to update standards identifying the test procedures. The Laboratory is qualified to carry out independent sampling.
Testing laboratory locations: 1. Testing Laboratory in Prague (0100) Prosecká 811/76a, 190 00 Praha 9 2. Testing Laboratory in České Budějovice (0200) 3. Testing Laboratory in Plzeň (0300) Zahradní 15,
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of Accreditation 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK PO Box 26385 Corner of 46th and 47th Streets Jebel Ali Industrial Area 1 Dubai United Arab Emirates Contact: Mr
Ackrediteringens omfattning RISE Research Institutes of Sweden AB i Borås, Karlskrona ackr 1002, NB 0402
Detta beslut omfattar de uppgifter som det anmälda organet är utsett att göra i respektive ZA-bilaga i de harmoniserade standarderna och tekniska specifikationerna i tabell 2 samt enligt standarder för
Fire Safety Fire Resistant Building Components
Fire Safety Fire Resistant Building Components NBN 713-020 1968 Fire fighting - Fire performance of building materials and products - Fire resistance of building materials NBN 713-020/A1 1982 Protection
Contact person Date Reference Page Christian Larsson P01958A 1 (3) Safety
issued by an Accredited Testing Laboratory Contact person Christian Larsson 2016-09-05 6P01958A 1 (3) Safety +46 10 516 57 61 Christian.Larsson@sp.se Accred. No. 1002 Testing ISO/IEC 17025 Olar-Portconsult
Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania
page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested
The WWA Standard for manufacturing wood windows and window performance
Wood Knowledge Wales and Bron Afron Community Housing The Case For Wood Windows The WWA Standard for manufacturing wood windows and window performance Kevin Underwood Wood Window Alliance Introduction
EN CE instead of approval Opportunities for manufacturers and trading to enter new markets in Europe
EI 2 30-C5-S 200 do you know what it means? EN 16034 CE instead of approval Opportunities for manufacturers and trading to enter new markets in Europe Dipl.-Ing. Jürgen Benitz-Wildenburg, Director PR &
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC17065:2012 to provide product conformity certification Bucknalls Lane Garston Watford Hertfordshire WD25 9XX Contact: Mr M Pratt Tel:
BURGLAR, BALLISTIC, BLAST & FIRE RESISTANT SYSTEMS
BURGLAR, BALLISTIC, BLAST & FIRE RESISTANT SYSTEMS PRESIDENTIAL PAVILLION, CONGO AIRPORT Arch. LUFTHANSA CONSULTING BALLISTIC RESISTANT CLASS BR7 2 Premium Partner for Safety Glazing Systems GLASSCON
Sýnishorn Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard
ÍST EN 14449:2005 Gildistaka 30.11.2005 ICS: 81.04 Gler í byggingar - Lagskipt gler og lagskipt öryggisgler - Samræmismat/vörustaðall Glass in building - Laminated glass and laminated safety glass - Evaluation
European Technical Assessment
European Technical Assessment ETA 17/0457 Version 01 Date of issue: 2017-08-09 UBAtc Assessment Operator: Belgian Construction Certification Association Rue d Arlon 53-1040 Brussels www.bcca.be - info@bcca.be
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 14351-1:2006+A2:2016 AKNAD JA UKSED. TOOTESTANDARD, TOODETE OMADUSED. OSA 1: AKNAD JA VÄLISUKSED Windows and doors - Product standard, performance characteristics - Part 1: Windows
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 14449:2005 Ehitusklaas. Lamineeritud klaas ja lamineeritud turvaklaas. Vastavushindamine/Tootestandard Glass in building - Laminated glass and laminated safety glass - Evaluation
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17819-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.08.2014 to 10.08.2019 Holder of certificate: MPA
FLAMEBREAK. Rev.D Mechanical Performances - General: TM
FLAMEBREAK Mechanical Performances 1 Mechanical Performances - General: NOTE: Doorsets using FLAMEBREAK based doors have been tested to performances that exceed the DD171 / BS EN 1192 minimum requirements
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Westervoortsedijk, Building SB 6827 AV Arnhem Nederland Location Westervoorstedijk 73, Building SB 6827 AV Arnhem The Netherlands
Sound absorption coefficient Equivalent sound absorption area Sound absorption coefficient Sound absorption class
Annex 1 to the Accreditation Certificate No. LA.01.028 issued on 18-12-2015, approved on 18-12-2015 by the Order No. AK-200 of Director of National Accreditation Bureau under the Ministry of 1 (8) pages
best practice guide Pedestrian doorsets Fire resisting and/or smoke control characteristics - to
best practice guide Pedestrian doorsets Fire resisting and/or smoke control characteristics - to BS EN 16034: 2014 Permission to reproduce extracts from BS EN 16034 : 2014 is granted by BSI. DHF BEST PRACTICE
10.6 Schedule of Accreditation
Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:
European Technical Assessment ETA-14/0176
British Board of Agrément Bucknalls Lane Watford Herts WD25 9BA Tel: + 44 (0) 1923 665300 Fax: + 44 (0) 1923 665301 e-mail: mail@bba.star.co.uk website: www.bbacerts.co.uk Designated according to Article
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 118 Lupton Avenue Leeds LS9 6ED Contact: Mr Scott Wiseman Tel: +44 (0)113 248 8830 Fax: +44 (0)113 248 0239 E-Mail: scott@hstts.co.uk Website:
Q-Air evaluation by experiment
Q-Air evaluation by experiment Q-Air trials revealed a build-up of internal heat and pressure within the chambers, which meant a unique solution had to be invented for a clear glass module. Coatings with
CE Marking for Fire Resistant doors. The future EN Agustín Garzón Cabrerizo Technical Director Fire Resistance Lab.
CE arking for Fire Resistant doors. The future EN 16034 Agustín Garzón Cabrerizo Technical Director Fire Resistance Lab. AFITI-LICOF 1 Overview Pedestrian doorsets, industrial, commercial, garage doors
KINGS COUNTY JAIL EXPANSION PHASE III COUNTY OF KINGS SECTION
SECTION 237433, PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
Annex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : İçerenköy Mah. Umut Sk. E5 Yanyol Üzeri AND Binası No:12 İç Kapı No :4 Ataşehir/ 34752 İSTANBUL/TÜRKİYE Phone : 0 216 651 08
C-01 FIRE DECKS AND BULKHEADS
Guideline No.: C-01(201510) C-01 FIRE DECKS AND BULKHEADS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
IFE Level 3 Certificate in Passive Fire Protection
IFE Level 3 Certificate in Passive Fire Protection Qualification Number: 603/3054/5 Introduction The IFE Level 3 Certificate in Passive Fire Protection has been developed by the Institution of Fire Engineers
IFE Level 2 Certificate in Passive Fire Protection
IFE Level 2 Certificate in Passive Fire Protection Qualification Number: 603/3640/7 Introduction The IFE Level 2 Certificate in Passive Fire Protection has been developed by the Institution of Fire Engineers
IFE Level 3 Certificate in Passive Fire Protection
IFE Level 3 Certificate in Passive Fire Protection Qualification Number: 603/3054/5 Introduction The IFE Level 3 Certificate in Passive Fire Protection has been developed by the Institution of Fire Engineers
SVENSK STANDARD SS-EN :2005
SVENSK STANDARD SS-EN 14179-2:2005 Fastställd 2005-06-09 Utgåva 1 Byggnadsglas Värmeprovat, termiskt härdat säkerhetsglas av kalk-sodasilikattyp Del 2: Produktstandard och utvärdering av överensstämmelse
Guidance Note No 21/1. CE Marking Windows and doorsets to BS EN 16034
Guidance Note No 21/1 CE Marking Windows and doorsets to BS EN 16034 Introduction CE Marking of construction products has been a legal requirement since July 2013. It is a European requirement for all
Standards in Security Shutters & Fire Shutters (UK & USA)
Standards in Security Shutters & Fire Shutters (UK & USA) Jason Powell 17.11.17 For UKRS Ltd Contents 1. Roller Shutter Safety Standards 1.1 UK / Europe 1.2 USA 2. Fire Shutter / Curtain Standards 2.1
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Saint-Gobain Construction Products UK LTD t/a British Gypsum ccredited to British
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service ccredited to Holmesfield Road Warrington Cheshire W1 2DS Contact: Mr D Brown Tel: +44 (0)1925-655116 Fax: +44 (0)1925-655419 E-Mail: david.brown@exova.com
GUIDELINIE ECB S R10. March European Certification Body GmbH
March 2017 GUIDELINIE ECB S R10 Additional requirements for burglar resistant products within the scope of EN 1627 according to guideline ECB S C10 with electromechanical locks, striking plates or security
List of tests (2018)
SRI Center for Physical Sciences and Technology Textile Institute Department of Textiles Physical-Chemical testing List of tests (2018) 1. Fibre content analysis 1.1 Melting point determination ISO/TR
CPR Guide: EU Rules Practical Impact
CPR Guide: EU Rules Practical Impact December 2015 Glass for Europe is the trade association for Europe s manufacturers of flat glass. Flat glass is the material that goes into a variety of end products
National technical assessment NTĮ :2013
STATE ENTERPRISE CONSTRUCTION PRODUCTS CERTIFICATION CENTRE Linkmenų g. 28, LT-08217 Vilnius Tel.: +370 5 2728077, +370 5 2728078 Fax: +370 5 2728075 e-mail centras@spsc.lt Website: www.spsc.lt National
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11149-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2014-10-02 to 2018-11-28 Holder of certificate: VdS
CPR Guide: EU Rules Practical Impact
CPR Guide: EU Rules Practical Impact December 2015 About Glass for Europe Glass for Europe is the trade association for Europe s flat glass sector. Flat glass is the material that goes into a variety of
PERFORMANCE & TESTING
PERFORMANCE & TESTING A window has a multitude of functions. It must let in light, provide a view, allow ventilation, insulate thermally and acoustically, protect against the weather, break-ins and fire.
Aggregates Table 1 No. Title Options
Aggregates Table 1 BS EN 932-1 Methods for sampling From stockpiles BS EN 932-2 Methods for reducing laboratory samples BS EN 932-3 BS EN 933-1 BS EN 933-2 Procedure and terminology for simplified petrographic
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Issue No: 007 Issue date: 16 February 2018 Level 2 5 Harbour Exchange Square London E14 9GE Contact: Owen Bian Tel: +44 (0)20 7868 1509 E-Mail: info@ccqs.co.uk Website: www.ccqs.co.uk Inspection performed
Annex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 17819 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 29.06.2017 to 10.08.2019 Holder of certificate: MPA
Annex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
BS EN 13823: A Report To: Contra Vision. Document Reference: Date: 25 th November Issue No.: 1
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0 1925 655116 F : +44 (0) 1925 655419 E : warrington@exova.com W: www.exova.com BS EN 13823: 2010 Reaction to Fire Tests
Specifying Security Hardware for Doors
Specifying Security Hardware for Doors A guide for security and building professionals, installers and locksmiths produced by dhf and The Glass and Glazing Federation. www.dhfonline.org.uk 01 dhf Best
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 4ward Ltd 5 Hampers Common Industrial Estate Petworth West Sussex GU28 9NR Contact: Ms Lesley Komatsu Tel: +44 (0)1798-342240 Fax: +44 (0)1798-344482
In accordance with: Period of Fire Resistance: 180 minutes (3 hours) integrity (single) 120 minutes (2 hours) integrity (overlapped)
In accordance with: BS EN 8524-1 BS EN 1634-1 BS 5234-2 BS EN 14600 BS EN 13501-2 BS EN ISO 1716 BS EN 13501-1+A1 BS EN ISO 14184-1 BS EN 12101 10 BS ISO 21927 9 Period of Fire Resistance: 180 minutes
Protect human life against hazards at refineries and other sensitive. Complete cabin protected against blast, gas, fire and smoke
Safety cabin Protect human life against hazards at refineries and other sensitive areas Complete cabin protected against blast, gas, fire and smoke Equipped with an air-cleaning and HVAC system Safety
EFFISUS BRAZE MEMBRANE
Effisus Braze Membrane EFFISUS BRAZE MEMBRANE Elastomer sheets for facade sealing from Ethylen-Propylen-Dien-Terpolymer (EPDM), homogeneous, cured without fleece-backing. Elastomer sheets for facade waterproofing.
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 14195:2005 Metallprofiilid kipsplaattarindite aluskonstruktsioonide jaoks. Definitsioonid, nõuded ja katsemeetodid Metal framing components for gypsum plasterboard systems - Definitions,
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard
Electromagnetic Locking Devices Performance Requirements
Technical Specification Electromagnetic Locking Devices Performance Requirements DHF TS 010:2016 Technical specification produced by dhf www.dhfonline.org.uk Contents Foreword 1. Scope 2 ANNEX A Bodies
Introduction. Declaration of performance (DoP) CE marking
Introduction This guide has been written to help users and specifiers of wood based panels to understand the documentation and labelling that should accompany (on a website, e-mail or physically) wood
The New Generationn of Firedoors
The New Generationn of Firedoors Product Standard EN 16034 Introduction A modern company, while operating in mature sectors, is actually part of an ncreasingly technocratic world, influenced by technical,
Sýnishorn Glass in building - Insulating glass units - Part 5: Evaluation of conformity
FprEN 1279-5 Umsagnarfrestur til 8.2.2018 ICS: 81.04 Gler í byggingar - Einangrunargler - Hluti 5: Samræmismat Glass in building - Insulating glass units - Part 5: Evaluation of conformity Staðfestur af
Coatings for protection of FRP structures with heavy rain erosion loads
CLASS PROGRAMME Type approval DNVGL-CP-0424 Edition May 2016 Coatings for protection of FRP structures with heavy rain erosion loads The content of this service document is the subject of intellectual
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 10 - SPECIALTIES
SECTION 105200 - FIRE-PROTECTION SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
WHITE PAPER The Importance of Rinsing in Metal Finishing Operations
WHITE PAPER The Importance of Rinsing in Metal Finishing Operations By Steve Rudy, CEF & Sales/Technical Representative The focus or driving force of rinsing is to eliminate contaminants from the surface.
Declaration of Performance and CE marking of windows and external pedestrian doorsets according to the CPR
EPW/FEMIB/UEMV Guidance Sheet CE.02 May 2013 Declaration of Performance and CE marking of windows and external pedestrian doorsets according to the CPR Edition May 2013 Guidance Sheet CE.02 Supersedes
Aknad ja uksed. Tootestandard, toimivusomadused. Osa 1: Aknad ja välisuksed, millele ei esitata tulepüsivus- ja/või suitsutõkestusnõudeid
EESTI STANDARD EVS-EN 14351-1:2006+A1:2010 Aknad ja uksed. Tootestandard, toimivusomadused. Osa 1: Aknad ja välisuksed, millele ei esitata tulepüsivus- ja/või suitsutõkestusnõudeid KONSOLIDEERITUD TEKST
Iv. 5. FIRE-RESISTANT GLASSES Introduction Pyrobel and Pyrobelite Pyropane 372
Iv. BRANDS and products 5. FIRE-RESISTANT GLASSES 5.0 Introduction 362 5.1 Pyrobel and Pyrobelite 365 5.2 Pyropane 372 Casino, Oostende, Belgium - Architect: Bureau d architecture Storme-Van Ranst - Pyrobel
STS Directory Accreditation number: STS 0021
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 LPM AG Labor für Prüfung und Materialtechnologie Tannenweg 10 5712 Beinwil am See Head: Responsible for MS: Ruedi Herren
DOCUMENT TABLE OF CONTENTS
DOCUMENT 00003 June 16, 2005 TABLE OF CONTENTS DOCUMENT NO. INTRODUCTORY INFORMATION DOCUMENT 00003 TABLE OF CONTENTS DIVISION 1 GENERAL REQUIREMENTS SECTION 01011 SECTION 01025 SSP21.1-1 SECTION 01026