Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
|
|
- Blaze Hubbard
- 5 years ago
- Views:
Transcription
1 Issue No: 007 Issue date: 16 February 2018 Level 2 5 Harbour Exchange Square London E14 9GE Contact: Owen Bian Tel: +44 (0) info@ccqs.co.uk Website: Inspection performed at/from the above address only DETAIL OF ACCREDITATION Field of Inspection Type and Range of Inspection Methods and Procedures Safe use of Products and Installations of Theatrical Equipment and temporary stage structures, including but not limited to:- 1. Powered Winches and hoists used to raise curtains, scenery and other items. 2. Performer flying equipment 3. Mechanised props and moveable stage rigs. 4. Lighting equipment 5. Lifts used to raise equipment and performers to different parts of the stage or backstage areas except for lifts which fall within the scope of the Lifts Directive 95/16/EC 6. Lifting accessories and lifting equipment (As part of LOLER examinations) 7. Use of stage effects such as small, individual pyrotechnics, flame, snow, smoke, glitter etc. 8. Backstage equipment such as stage changing machinery, scenery handling, painting lifts etc. 9. Means of access, walkways, fixed and temporary ladders etc. In situ inspection of new or inservice installations. For compliance with Insurance requirements, PUWER, MHSWR LOLER Test methods will include, visual and tactile inspection. Functional testing. Measurement of sizes distances and clearances. Witnessed proof load testing Electrical testing including:- current, voltage, insulation and earth continuity checks. Documented in-house procedures which include the requirement of:- Provision and Use of Work Equipment Regulations 1998 S.I Management of Health and Safety at Work Regulations 199 S.I Lifting Operations and Lifting Equipment Regulations 1998 S I 2307 Annex I of Machinery Directive 2006/42/EC HSE Guidance on LOLER HSE Guidance. Thorough examination and inspection of particular items of lifting equipment 429/2002 (sections of specific relevance to theatrical equipment) EN or BS standards as found to be relevant to the specific piece of theatrical equipment A more specific and comprehensive list of references can be made available at inspection. Manager: MG Page 1 of 8
2 Field of Inspection Type and Range of Inspection Methods and Procedures Safe use of Products and Installations of Theatrical (cont d) Equipment and temporary stage structures, including but not limited to:- 10. Suitability and condition of PPE 11. Condition and strength of strong points for attachment of lifting rigs and PPE 12. Physical security of above stage equipment 13. Structural adequacy of on stage and rigging structures 14. Electrical and control systems for theatrical machinery, lighting and audio visual equipment In situ inspection of new or inservice installations. For compliance with Insurance requirements, PUWER, MHSWR LOLER Test methods will include, visual and tactile inspection. Functional testing. Measurement of sizes distances and clearances. Witnessed proof load testing Electrical testing including:- current, voltage, insulation and earth continuity checks. Documented in-house procedures which include the requirement of:- Provision and Use of Work Equipment Regulations 1998 S.I Management of Health and Safety at Work Regulations 199 S.I Lifting Operations and Lifting Equipment Regulations 1998 S I 2307 Annex I of Machinery Directive 2006/42/EC HSE Guidance on LOLER HSE Guidance. Thorough examination and inspection of particular items of lifting equipment 429/2002 (sections of specific relevance to theatrical equipment) EN or BS standards as found to be relevant to the specific piece of theatrical equipment A more specific and comprehensive list of references can be made available at inspection. END Manager: MD Page 2 of 8
3 requirements of ISO 17025:2005 Machinery Directive 2006/42/EC Implemented in UK Law by: EC Type Examination (Annex IX) Annex IV items 1 to 11, 13, 16 and 17 (excluding MEWPS) Essential Health and Safety requirements Annex I of the Directive and Schedule 2 Part 1 Annex I of the Regulations. SI 2008 No The Supply of Machinery (Safety) Regulations 2008 Current relevant Machinery Directive Harmonised EN standards and other relevant technical specifications. Electromagnetic Compatibility Directive 2004/108/EC Implemented in UK Law by: SI 2006 No Evaluation of technical documentation (Annex III) Industrial Equipment Information Technology Equipment Alarm Systems AV Equipment Laboratory and Test Equipment Domestic Appliances Essential Requirements Annex I of the Directive The Electromagnetic Compatibility Regulations 2006 Electromagnetic Compatibility Directive 2014/30/EU EU-type examination (Annex III) Essential Requirements Annex I of the Directive Manager: MD Page 3 of 8
4 Personal Protective Equipment - 89/686/EEC Implemented in UK Law by: The Personal Protective Equipment Regulations 2002 (SI 2002/1144) EC Type Examination Article 10, EC Quality Control System for the Final Product Article 11A System for Ensuring EC Quality of Production by Means of Monitoring Article 11B eye protection hearing protection chest and groin risks arising from a sporting activity foot and leg protection Basic Health and Safety requirements Annex II of the Directive and Schedule II of the Regulations head protection general body protection (clothing) against heat (heat >100^C and fire and flame) general body protection(clothing) against risks arising from a sporting activity respiratory protection against falls from height protection arising from a sporting activity Manager: MD Page 4 of 8
5 heat > 100 C and fire and flame heat < 100 C chemical agents mechanical risks cold [cold > -50 C], [extreme cold < -50 C] electrical risks mechanical risks risks arising from a sporting activity Manager: MD Page 5 of 8
6 Specialised area of competence: Protective clothing against static electricity Specialised areas of competence: Protective clothing for firemen against drowning and buoyancy aids. Manager: MD Page 6 of 8
7 Personal Protective Equipment Regulation (EU)2016/425 Module B EU Type Examination Module C2 to type based on internal production control plus supervised product checks at random intervals. Module D to type based on quality assurance of the production process. buoyancy aid Equipment Providing chest and groin protection eye protection foot and leg and antislip protection General body Protection-(Heat and flame protection and mechanical risks only) hand and arm protection chemical agents head protection hearing protection cold [cold > -50 C], [extreme cold < -50 C] (hand and arm protection only) Essential Health and Safety requirements Annex II of the Regulations Manager: MD Page 7 of 8
8 heat [heat < 100 C],[heat >100 C and fire] respiratory system protection against drowning Protective Equipment against electric shock (hand and arm protection only) against falls from height against mechanical risks Specialised area of competence: Firemens Suits. Specialised area of competence: Protective equipment for use in potentially explosive atmospheres END Manager: MD Page 8 of 8
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17065:2012 to provide product conformity certification Wonersh House The Guildway Old Portsmouth Road Guildford Surrey
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SIRA Certification Service Accredited to ISO/IEC 17065:2012 to provide product conformity Unit 6 Hawarden Industrial Park Hawarden Deeside
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Location Certification Scheme Edisonstraat 12A 6902 PK Zevenaar The Netherlands
More informationSUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE)
SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE) SCS/SF/053-8 Issue 1 Sira Certification Service INTRODUCTION One of the conditions placed on all holders of Sira
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Accredited to ISO17065:2012 to provide product conformity Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Contact: Mr Mark Jenkins Tel: +44 (0) 1489 558258 Fax: +44 (0)1489 558101
More informationThe PPE Directive and the PPE Regulation
PPE Regulation (EU) 2016/425 The PPE Directive and the PPE Regulation The history and future of PPE Certification A whitepaper The current PPE Directive at a glance The PPE Directive was one of the first
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Accredited to ISO17065:2012 to provide product conformity Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Contact: Mr Mark Jenkins Tel: +44 (0) 1489 558258 Fax: +44 (0)1489 558101
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Chatsworth Technology Park Dunston Road Chesterfield Derbyshire S41 8XA Contact: Mr M Watson Tel: +44 (0)1246 263861 Fax: +44 (0)1246 260919
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationValve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Activities trading under the names and Kiwa Telefication Fire alarm/detection
More informationMARKING EC Directive 97/23 PED (Pressure Equipment Directive)
MARKING EC Directive 97/23 PED (Pressure Equipment Directive) Field of application The Directive applies to the design, manufacturing and conformity assessment of the pressure equipment and of their groups
More informationAnnex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
More informationThe Machinery Directive 2006/42/EC
The Machinery Directive 2006/42/EC Aims of the Machinery Directive To ensure the free movement of machinery on the EU market whether manufactured in the EU or imported To ensure a high level of protection
More informationWindow and Door Standards for Performance and Security. Russell Day Senior Technical Officer Glass and Glazing Federation
Window and Door Standards for Performance and Security Russell Day Senior Technical Officer Glass and Glazing Federation The Standards BS EN 14351-1:2006+A2:2016 Windows and doors. Product standard, performance
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Unit 16-18 Abenbury Way Wrexham Industrial Estate Wrexham LL13 9UZ United Kingdom Contact:
More informationThe transition requirements of the new Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment
expert guide / The transition requirements of the new Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment www.arco.co.uk contents What you need to know
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationThe New PPE Regulation (EU) 2016/425
The New PPE Regulation (EU) 2016/425 Dave Tuplin Certification Manager, BSI 1 PPE Regulation (EU) 2016/425 changes Agenda Who is BSI Landscape and timeframes Scope of the new PPE Regulation Categorisation
More informationElite Safety Consultants. Your One Stop Safety Solution Provider Safety: It s a choice and not a chance. A glimpse at our Profile
Your One Stop Safety Solution Provider Safety: It s a choice and not a chance A glimpse at our Profile We have been accredited by (DAC) Dubai Accreditation Centre of Dubai Municipality List of Accredited
More informationThe Impact of Marking Requirements. on Design and Performance of Power Converters and Electrical Drives
European The Impact of Marking Requirements on Design and Performance of Power Converters and Electrical Drives Harmonization of Standards The Key to the European Market C onfused E urope EN 600204 BS...
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationDirect dial: +44 (0) Date: 02 May 2012 Cust No Accr No Construction Products Directive
Ms Clover Summers Sustainable Buildings Division Department for Communities and Local Government Eland House Bressenden Place London SW1E 5DU Direct dial: +44 (0)20 8917 8583 Email: alex.penfold@ukas.com
More informationBUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
More informationNew Approach vs Standards and Regulation: how it all works
New Approach vs Standards and Regulation: how it all works between the EU and an EU Member State (UK example) Volodymyr Yakubov Senior Standardization Expert, INOGATE Head of International Projects, BSI
More informationCE Compliance. Silva Management. September 18th, 2014 David Norris. C Eng. FI Mech E.
David Norris C Eng. FI Mech E. Recent employment positions. Consultant to Machine Tool companies. Technical Director, Bridgeport Machines Ltd. Engineering V.P., Bridgeport Machines Inc. We will consider
More informationContents EN :2006+A2:2016 (E)
Contents European foreword... 6!Introduction"... 8 1 Scope... 9 2 Normative references... 10 2.1 Classification standards... 10 2.2 Test and calculation standards... 10 2.3 Other standards... 12 3 Terms
More informationStandards in Security Shutters & Fire Shutters (UK & USA)
Standards in Security Shutters & Fire Shutters (UK & USA) Jason Powell 17.11.17 For UKRS Ltd Contents 1. Roller Shutter Safety Standards 1.1 UK / Europe 1.2 USA 2. Fire Shutter / Curtain Standards 2.1
More informationCE Marking and Technical Standardisation
EDITION 3.0 CE Marking and A G A M B I C A T E C H N I C A L G U I D E Technical Standardisation Guidelines for application to Electrical Power Drive Systems CE Marking and Technical Standardisation Guidelines
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 118 Lupton Avenue Leeds LS9 6ED Contact: Mr Scott Wiseman Tel: +44 (0)113 248 8830 Fax: +44 (0)113 248 0239 E-Mail: scott@hstts.co.uk Website:
More informationCouncil Directive 93/68/EEC of 22 July 1993 amending Directives
Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility),
More informationBuilding Standards Division. Whisky Maturation Warehouses Storage Buildings (Class 1) Automatic Fire Suppression Systems
Building Standards Division Whisky Maturation Warehouses Storage Buildings (Class 1) Automatic Fire Suppression Systems Crown Copyright 2015 Produced by the Buildings Standards Division February 2015 Version
More informationUK Direction BS7671 BS 8492 BS /01/2018
UK Direction BS7671 BS 8492 BS6701 23/01/2018 BS7671:2015 The 17 th Edition Revision 3 details the requirements for an improved fire rating on all cables within a fire route. 422.2.1 In conditions BD2
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Lee House 90 Great Bridgewater Street Manchester M1 5JW Contact: Helen Taft Tel: +44 (0) 161 237 4080 E-Mail: helen.taft@centreforassessment.co.uk
More informationGeneral safety precautions English
English 1 1 1.1 About the documentation The original documentation is written in English. All other languages are translations. The precautions described in this document cover very important topics, follow
More informationOPERATIONAL PERMIT STORAGE MAGAZINE PERMIT APPLICATION
PRINCE WILLIAM COUNTY DEPARTMENT OF FIRE AND RESCUE FIRE MARSHAL S OFFICE 5 COUNTY COMPLEX CT. SUITE 160 PRINCE WILLIAM, VA 22192 (703) 792-6360 office (703) 792-6492 fax WWW.PWCGOV.ORG/FIRE For Office
More informationGuidance on Safe Operation of Boilers Ref: BG01
GSOB cover 4 page 02/13_Layout 1 18/02/2013 08:51 Page 2 Guidance on Safe Operation of Boilers Ref: BG01 A joint document by the Safety Assessment Federation and The Combustion Engineering Association
More informationRENAR Accreditation Activities
RENAR accreditation activities represent the scopes where RENAR has competence to provide accreditation services. RENAR defined its accreditation activities in accordance with the EA MLA scope (EA multilateral
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : İçerenköy Mah. Umut Sk. E5 Yanyol Üzeri AND Binası No:12 İç Kapı No :4 Ataşehir/ 34752 İSTANBUL/TÜRKİYE Phone : 0 216 651 08
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Issue No: 035 Issue date: 23 February 2017 16 Abbotsinch Road Grangemouth FK3 9UX Contact: Mr G Falconer Tel: +44 (0)1324 489182 Fax: +44
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Westervoortsedijk, Building SB 6827 AV Arnhem Nederland Location Westervoorstedijk 73, Building SB 6827 AV Arnhem The Netherlands
More informationWhere Process Safety meets Machine Safety
Where Process Safety meets Machine Safety A document to aid understanding between the end-user and machine builder for functional safety issues. by The 61508 Association Overriding key principle...it must
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17065:2012 to provide product conformity 20 Park Street Princes Risborough Buckinghamshire HP27 9AH Contact: Ian Woodhouse Tel: +44
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 4ward Ltd 5 Hampers Common Industrial Estate Petworth West Sussex GU28 9NR Contact: Ms Lesley Komatsu Tel: +44 (0)1798-342240 Fax: +44 (0)1798-344482
More informationESPE Electro-Sensitive Protective Equipment
ESPE Electro-Sensitive Protective Equipment Presented by Simon Deighton Business Development Manager, Safety Systems Technology, Part of the machinery division of TÜV SÜD Product Service Our Services:
More informationYour specialist partner for total electrical compliance. Electrical Testing
Your specialist partner for total electrical compliance Electrical Testing "To achieve compliance with the legal requirements of the Electricity at Work Regulations 1989 requires proof that an electrical
More informationADVISORY COMMITTEE FOR ROOFSAFETY. Information Sheet No.4:2012. BS EN 795 and the 89/686/EEC Directive
ADVISORY COMMITTEE FOR ROOFSAFETY Information Sheet No.4:2012 BS EN 795 Background 1. The aim of this paper is to provide information in regard to the current issues surrounding the relationship between
More informationDo you manufacture equipment or protective systems for use in potentially explosive atmospheres? Do you process, trade or import them?
TÜV NORD CERT GmbH Geschäftsstelle Hannover Am TÜV 1 30519 Hannover Zertifizierung Certification body for equipment according to Directive 94/9/EC of TÜV NORD CERT GmbH Summarized Information Directive
More information10.6 Schedule of Accreditation
Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various
More informationEUROPUMP ATEX Guideline Part II
EUROPEAN ASSOCIATION OF PUMP MANUFACTURERS ASSOCIATION EUROPÉENNE DES CONSTRUCTEURS DE POMPES EUROPÄISCHE VEREINIGUNG DER PUMPENHERSTELLER EUROPUMP ATEX Guideline Part II Application of the EC-Guidelines
More informationAnnex of the certificate (Page 1/7) Accreditation Scope
Annex of the certificate (Page 1/7) As a Testing Laboratory Address: Organize Sanayi Bölgesi 10. Cadde No: 4 Melikgazi 38070 KAYSERİ/TÜRKİYE Phone : 90 352 321 11 06 Fax : 90 352 321 15 69 E-Mail : kayserilab@tse.org.tr
More informationRisk Management Services. Electrical Safety Inspection and Testing. We can show you more.
Risk Management Services Electrical Safety Inspection and Testing We can show you more. Risk Management Services Electricity is a potential hazard that impacts both personal safety and property. Adequate
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Building 63 Haslar Marine Technology Park Haslar Road Gosport Hampshire PO12 2AG Contact: Mr S Kumar Tel: +44 (0) 208 692 5050 Fax: +44 (0)
More informationENABLING MARKET ACCESS RADIO EQUIPMENT DIRECTIVE (RED) 2014/53/EU. The new radio equipment directive in detail
ENABLING MARKET ACCESS RADIO EQUIPMENT DIRECTIVE () 2014/53/EU The new radio equipment directive in detail RADIO EQUIPMENT DIRECTIVE () 2014/53/EU The new radio equipment directive in detail As of 13/06/2017,
More informationCE marking of industrial doors under the CPR Michael Skelding, Secretary and General Manager Door and Hardware Federation
CE marking of industrial doors under the CPR 2011 Michael Skelding, Secretary and General Manager Door and Hardware Federation Who is the DHF? DHF represents manufacturers & installers of: Pedestrian doors
More informationPPE Global Market Access Program
PPE Global Market Access Program About Intertek Group Intertek is a leading provider of quality and safety solutions serving a wide range of industries around the world. From auditing and inspection,
More informationCE MARKING PROCESS & NOTIFIED BODIES
CE MARKING PROCESS & NOTIFIED BODIES Ellis Garai Ramin Miri Spring 2011 GLOBAL BIODESIGN STANFORD UNIVERSITY Machinery 9% Others 49% Construction 11% Notified Bodies Industrial and Medical Devices 8% NAWI
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationXB-EFA-8L-BK & XB-EFA-8R-BK
Supply & Extract Ventilation Unit with Heat Recovery The EMC Directive 2014/30/EU The Low Voltage Directive 2014/35/EU The information contained in this document provides details of installation, operation
More informationRecord of Amendments. Version Date Amendment Section/page affected
Industry support for effective compliance BTHA Guidance - The Low Voltage Directive (LVD) Directive 2014/35/EU On the harmonisation of the laws of the Member States relating to the making available on
More informationAnnex to declaration of accreditation (scope of accreditation) Normative document: EN ISO/IEC 17065:2012 Registration number: C 001
This annex is valid from: 22-11-2017 to 01-05-2018 Replaces annex dated: 03-11-2017 Voluntary suspension for the crossed out activities as 03-11-2017 Meander 1051 6825 MJ Arnhem The Netherlands Location(s)
More informationRADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 RADAR REFLECTOR JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation with
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Task description Type of equipment
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Exova (UK) Limited trading as Warrington Certification Issue No: 033 Issue date: 06 November 2017 to provide product conformity Holmesfield
More informationTraining, Assessment, Consultants for Hazardous & Industrial Areas
Training, Assessment, Consultants for Hazardous & Industrial Areas EPIT provides specialist training, assessment and consultancy services for engineers working in hazardous and industrial environments.
More informationLegislation associated with Hazardous Locations. Pieter Coetzee ZONE 2 ZONE 1 ZONE 0. Be safe be Ex
Legislation associated with Hazardous Locations Pieter Coetzee ZONE 2 ZONE 0 ZONE 1 Be safe be Ex Contents History Introduction Occupational Health and Safety Act. (Act 85 of 1993) General Machinery Regulation
More informationOverview of Emerging Safety Standards Machinery Sector By Phill Carroll Business Development Manager Topics Historical Situation Introduction of New Standards Terminology Safety Integrity identification
More informationATEX GUIDE. A short introduction to ATEX Terminology. Equipment for use in flammable atmospheres. Directive 94/9/EC
Quick Introduction to TÛV Denmark TÜV Denmark - is a part of the TÜV NORD Group a global Organisation f Certification and Inspection of: Quality Management Systems, Products, Processes and Qualification
More informationMARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 MARINE GYRO COMPASS JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation
More informationIn accordance with: Period of Fire Resistance: 180 minutes (3 hours) integrity (single) 120 minutes (2 hours) integrity (overlapped)
In accordance with: BS EN 8524-1 BS EN 1634-1 BS 5234-2 BS EN 14600 BS EN 13501-2 BS EN ISO 1716 BS EN 13501-1+A1 BS EN ISO 14184-1 BS EN 12101 10 BS ISO 21927 9 Period of Fire Resistance: 180 minutes
More informationProject Briefing Document. Section 3 Electrical Services design guide and specifications
ESTATES SUPPORT SERVICE Project Briefing Document Section 3 Electrical Services design guide and specifications Issue 1.1 June 2014 Project Ref. Project Name Project Manager Date issued... Consultant/Contractor...
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Presley House Presley Way Crownhill Milton Keynes MK8 0ES United Kingdom Contact: Jeremy Hodge Tel: +44 (0) 1908 267300 Fax: +44 (0) 1908
More informationGeneral safety precautions English
English 1 1 1.1 About the documentation The original documentation is written in English. All other languages are translations. The precautions described in this document cover very important topics, follow
More informationOn Electromagnetic Compatibility
TECHNICAL REGULATION On Electromagnetic Compatibility Approved by Resolution of Cabinet of Ministers of Ukraine No. 785 dd. 2009.07.29 ELMAS LTD Index Index...2 General Provisions...3 Essential Requirements...5
More informationBest Practice Guide. Windows and Doors. Single-axis hinges to BS EN
Windows and Doors Single-axis hinges to BS EN 1935 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Windows and Doors - Single-axis hinges to BS EN 1935 dhf Best Practice s This publication
More information600W Hand Blender. Model: SP20160 (all colours) Helpline: v1.0. SP20160_IM.indd 1 26/07/ :38
600W Hand Blender Model: SP20160 (all colours) Helpline: 01733 404703 v1.0 SP20160_IM.indd 1 26/07/2016 11:38 IMPORTANT INFORMATION - RETAIN FOR FUTURE USE When using any electrical appliance, basic safety
More informationControlled Door Closing Devices
Controlled Door Closing Devices to BS EN 1154: 1997 + A1:2003 www.dhfonline.org.uk 01 dhf Best Practice dhf Best Practice : Controlled Door Closing Devices to BS EN 1154: 1997 + A1:2003 dhf Best Practice
More information1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?
QUESTIONS TO REGULATORS 1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres? Note: This answer only relates to coal mining in the state of New South
More informationA Step by Step Guide to Energy Labelling of Gaseous Fuel Local Space Heaters (Part 1)
A Step by Step Guide to Energy Labelling of Gaseous Fuel Local Space Heaters (Part 1) What do the new regulations require? The Energy Related Products (ErP) Regulations require that: From the 1 st January
More informationGuide to Membership Assessments
Issue 10 July 2008 Guide to Membership Assessments 1. Introduction This guide is intended to assist companies in preparing for an assessment visit by SELECT. It supplements the SELECT Assessment Criteria
More informationISO INTERNATIONAL STANDARD. Mobile elevating work platforms Design, calculations, safety requirements and test methods
INTERNATIONAL STANDARD ISO 16368 Second edition 2010-05-15 Mobile elevating work platforms Design, calculations, safety requirements and test methods Plates-formes élévatrices mobiles de personnel Conception,
More informationMarket Surveillance Authorities, responsible Governmental Authorities, web pages and areas of competence in the Slovak Republic
Market Surveillance Authorities, responsible Governmental Authorities, web pages areas of competence in the http://www.soi.sk http://www.nip.sk Public Health Authority of the http://www.uvzsr.sk Slovak
More informationJBCE input for the RoHS FAQ document
JBCE input for the RoHS FAQ document JBCE welcomes the recast of the RoHS Directive 2011/65/EU (hereafter generally referred to as RoHS 2 ) 1 and appreciates the ongoing work by the Commission in realizing
More informationCertificate of Registration
Certificate of Registration QUALITY MANAGEMENT SYSTEM - ISO 13485:2003 & EN ISO 13485:2012 This is to certify that: Sanatmetal Orthopaedic & Traumatologic Equipment Manufacturer Ltd. Faiskola u. 5. 3300
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. The prime activity in this
More informationSERIES 46000E Bi-Directional In-Line Deflagration Flame Arrester
SERIES 46000E Bi-Directional In-Line Deflagration Flame Arrester Suitable for use with Explosion Group IIB3 or IIA (NEC Groups C or D) Vapors PROTECTOSEAL CAUTION: If any questions arise concerning the
More informationThis annex is valid from: to Replaces annex dated: Imposed suspension for the crossed out activities as of
Annex to declaration accreditation (scope accreditation) This annex is valid from: 03-05-2018 to 01-05-2022 Replaces annex dated: 12-04-2018 Imposed suspension for the crossed out activities as 03-05-2018
More information1.5L Fryer v1.0. Model: SD6060N. Helpline. SD6060N_IM.indd 1 07/10/ :58
1.5L Fryer Model: SD6060N Helpline 01733 404703 v1.0 SD6060N_IM.indd 1 07/10/2013 09:58 IMPORTANT INFORMATION - RETAIN FOR FUTURE USE When using any electrical appliance, basic safety precautions should
More informationTransition from GAD to the GAR July,
Transition from GAD to the GAR July, 6 2017 1 P a g e Introduction Dear Sit Customers, As of 21 April 2018, the Gas Appliances Directive 2009/142/EC (GAD) will be replaced by the new Gas Appliances Regulation
More information(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION
8.4.2016 EN Official Journal of the European Union C 126/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
More informationDIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
29.3.2014 Official Journal of the European Union L 96/309 DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating
More informationKettle v1.2. Models: SK (all models) Helpline:
Kettle Models: SK261050 (all models) Helpline: 01733 404703 v1.2 SK261050_IM.indd 1 22/09/2015 08:40 When using any electrical appliance, basic safety precautions should always be followed including the
More informationOfficial Journal of the European Union
C 20/16 27.1.2009 Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council on the approximation of the laws of the Member States
More informationGuidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014
Guidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014 11 July 2017 ESMA70-151-435 Table of Contents 1 Scope... 3 2 Purpose... 5 3 Compliance and reporting obligations...
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office John M. Keynesplein 9 1066 EP Amsterdam The Netherlands Location Certification Scheme John M. Keynesplein 9 1066 EP Amsterdam
More informationZakres notyfikacji UE dla IMQ. IMQ ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ S.P.A. Via Quintiliano, MILANO Country : Italy
http://ec.europa.eu/enterprise/newapproach/nando/index.cfm?fuseaction=notifiedbody.notifiedbody&refe_cd= EPOS_43373&version_no=20&lst_version_no=20,9,8,7,6,5,4,3,2,,0,9,8,7,6,5,4,3,2,&max_ver sion=20&history_flg=y
More information