Elite Safety Consultants. Your One Stop Safety Solution Provider Safety: It s a choice and not a chance. A glimpse at our Profile
|
|
- Felix O’Brien’
- 5 years ago
- Views:
Transcription
1 Your One Stop Safety Solution Provider Safety: It s a choice and not a chance A glimpse at our Profile
2 We have been accredited by (DAC) Dubai Accreditation Centre of Dubai Municipality List of Accredited equipment is enclosed along-with DAC certificate) is an Independent, Third party Safety Inspection Company in Dubai following BS EN ISO/IEC 17020:2012 We have been duly approved by Govt. of Dubai, Department of Planning & Development - Trakhees for EHS (Environment, Health & Safety) An ISO 9001 : 2015 company. (International Organization for Standardization) An OHSAS ; 2007 company. (International Occupational Health and Safety Assessment Series) Member of NASP National Association of Safety Professionals Member of NFPA National Fire Protection Association
3 Lifting Equipment Window Cleaning Cradle Elevators (Lifts) Escalator & Travelators (Moving Walks) Forklifts Mobile Crane Over-head Crane Mobile Elevating Work Platform (MEWP) Chain Block/Chain Lever Hoist Construction Hoist Car Lift Stairlifts Dumbwaiter
4 Lifting Accessories Chain Slings Shackle Wire Rope Sling Hook Webbing Sling Eyebolt Spreader Beam/Lifting Beam
5 Pressure Vessels Air Receivers Air Compressors Boilers Other Expansion Vessels Calorifiers Storage Tanks LPG tanks Pipings etc.
6 NDT (Non Destructive Testing) Welding Inspections Visual Testing (VT) Radiography (RT) Ultrasonic Testing (UT) Magnetic Particle (MT) Dye Penetrate Testing (DPT) Welding related Welding inspections Welder Qualification Welder Certifications Safe Welding &Training Consulting for WPS PQR preparation Welding Consulting Services NDT Training PWHT Training Material Inspections Third Party Inspections
7 Thermography PAT Portable Appliance Test Our Thermographic survey and report service offers our clients the ability to discover those otherwise hidden electrical problems before they lead to potentially costly and untimely breakdowns. Thermography is an essential preventative maintenance tool for any business that requires continuity with their productivity or safety confirmation for a new or existing electrical installation. MDBs, SMDBs, ACBs, ATS Bus Bars, Capacitors, MCC, Main Switches Pool Panels, Earthing Pits, Lightning Arrestors Portable Appliance Testing (PAT) is the term used to describe the examination of electrical appliances and equipment to ensure they are safe to use. Most electrical safety defects can be found by visual examination but some types of defect can only be found by testing. A portable electrical appliance is any item of equipment with a lead and a plug and which is normally moved around or can be moved and is connected to the mains supply by a standard 3 pin plugs. Welding Machines, Cutting Machines All type of portable tools Grinders, Any Industrial & Home Appliances
8 Generators Portable & Industrial Pull-Out Testings Inspections are conducted for Portable and Industrial Generators Visual & Functional Tests Resistance Measurements Motor Starter status Operating Temperature etc. Pull-Out Tests can be conducted for Anchor Bolts Eye Bolts Hooks Concrete Strengths Anchoring Points
9 LPG Distribution System LPG Distribution System can be inspected in totality. (Inspections on Pipe lines, pressure tests, Gauges, Solenoid valves, regulators, control panel, leak detectors, sensors, fire extinguishers, emergency shut-off valves etc. Racking System Inspection, Testing and Certification of Static Pallet Racking. Training to personnel on periodic inspections Inspections include but limited to Upright foot plates, slices, out-of-plump racking, braces, floor anchors, over-loading beams, frames, beam connectors/ clips etc. Trainings - Various Various trainings on-site & off-site can be arranged Additional Scopes We also arrange other Inspections & Scope of Works Welder Safety Training & Certifications NDT & PWHT Electrical Safety (Level 1 & 2) Cradle Operators & Safety Forklift Operators & Safety MEWP Operators & Safety Construction Safety HSE & PPE Safety Material Handling Confined Space Working at Heights Lock-out & Tag out Fall Protection Safety And many more Fire & Life Safety Audits Fire Fighting Trainings First Aid Trainings Environment Tests (all) Noise Tests Water Tests Scaffolding : Competency Trainings & Certifications Rigging & Slinging : Competency Trainings & Certifications Calibration of Tools & Instruments And many more
10 P.O. Box: 26973, Dubai, UAE. Tel: , Fax: Website: Mr. M. Paul Ravi Managing Director Mobile: Ms. Tessa G. Belmoro Manager Sales & Marketing Mobile: Our strengths lie in Quality Service Deliverance on time Competitive Prices Safety: It s a choice and not a chance
10.6 Schedule of Accreditation
Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Task description Type of equipment
More informationAnnex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
More informationProposed standards for Chinese national adoption
Proposed standards for Chinese national adoption 1. Toys BS EN 71 *BS EN 71-1:2011+A3:2014 Safety of toys. Mechanical and physical properties (work in hand) BS EN 71-2:2011+A1:2014 Safety of toys. Flammability
More informationEXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
More informationCourse List: Survivex Premises
Course List: Survivex Premises Duration (days) Delegates (max.) Survival approved Basic Offshore Safety Induction & Emergency Training (BOSIET) 3 16 approved Basic Offshore Safety Induction & Emergency
More informationCyrus Reclaimer & Engineering Services Private Limited
+91-8048601244 Cyrus Reclaimer & Engineering Services Private Limited https://www.indiamart.com/cyrus/ We are engaged in manufacturing and supplying a wide range of Wire rope slings, chain & lifting tackels.
More informationFRIDAY, NOVEMBER 23, WORKPLACE SAFETY AND HEALTH (APPROVED CODES OF PRACTICE) NOTIFICATION 2018
FRIDAY, NOVEMBER 23, 2018 1 First published in the Government Gazette, Electronic Edition, on 23 November 2018 at 5 pm. No. 3135 WORKPLACE SAFETY AND HEALTH (CHAPTER 354A) WORKPLACE SAFETY AND HEALTH (APPROVED
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : İçerenköy Mah. Umut Sk. E5 Yanyol Üzeri AND Binası No:12 İç Kapı No :4 Ataşehir/ 34752 İSTANBUL/TÜRKİYE Phone : 0 216 651 08
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Issue No: 007 Issue date: 16 February 2018 Level 2 5 Harbour Exchange Square London E14 9GE Contact: Owen Bian Tel: +44 (0)20 7868 1509 E-Mail: info@ccqs.co.uk Website: www.ccqs.co.uk Inspection performed
More informationGeneral Industry Safety and Health Checklist Guidelines. Building and Premises. Loss Control Bulletin
The purpose of a monthly self-inspection program is to identify unsafe conditions in the work environment and unsafe employee actions. Management can then correct these safety hazards, reducing the potential
More informationoperations, Environmental & Instrumentation engineering solutions to the Commercial & Industrial segment in the Middle East. ARE
COMPANY PROFILE We are a Customized Engineering Solution Provider in the field of Industrial & Spec Gases WHO operations, Environmental & Instrumentation engineering solutions to the Commercial & Industrial
More informationFAS INTERNATIONAL COMPANY PROFILE. Thank you very much for giving us opportunity to introduce ourselves.
Page1 COMPANY PROFILE Thank you very much for giving us opportunity to introduce ourselves. is an ISO 9001:2015 & 18001:2007 certified Company. The FAS directors have very rich Experience in the field
More informationSouth Seas Inspection (S) Pte Ltd
PRESENTATION October 2009 SSI, your essential business partner for comprehensive & professional Derrick Building, Inspection, Maintenance, Repair & Operational Services to the Oil & Gas, Marine & General
More informationBS series MGC MOBILE GANTRY CRANE MADE IN CHINA. Wind Uniquely used in handling of wind turbine parts for loading.
BS series M AG I CA RT MGC MOBILE GANTRY CRANE MADE IN CHINA Concrete Lift Precast, Concrete, Block in Factory, construction site. Wind Uniquely used in handling of wind turbine parts for loading. Steel
More informationOHSISA TRAINING COURSE FOR WHO? DETAILS & INFORMATION. Fall Protection/Working at Heights 1 Day Course
The OHS Institute of South Africa offers a full range of consulting services pertaining to Safety, Health, Environment, Risk, and Quality (SHERQ) for all sectors of industry. This includes a full range
More informationEMERGENCY PREPAREDNESS & RESPONSE PROCEDURE
1 of 12 2 of 12 CONTENTS 1.0 OBJECTIVES...3 2.0 SCOPE...3 3.0 DEFINITION OF TERMS...3 4.0 RESPONSIBILITIES & AUTHORITIES...4 5.0...4 5.1 Emergency Scenario Identification...4 5.2 Emergency Response Team...4
More informationCurriculum Vitae. Experience Overview:
Mohammad Hamidullah (HSE Supervisor / Officer) Mob: +966 572710012, +91 8002187954 Email: mohammadhamidullah95@gmail.com, hamidullahm@sabtank.sabic.com ACHIEVEMENTS : 1. Honored Certificate from SABIC-SAFCO,
More informationA. General Safety LAB/ROOM: INSPECTED BY: DATE:
A. General Safety Item Subject Yes, No, A1 Exits are not obstructed, fastened or locked with keys A2 EXIT signs, if installed are clear and illuminated A3 A4 A5 A6 Fire extinguishers and fire blankets
More informationChapter 12 HOT WORK OPERATIONS. Purpose:
Chapter 12 Hot Work Operations Chapter 12 HOT WORK OPERATIONS Purpose: To provide written procedures to prevent the outbreak of fire, fire alarm activations, and smoke and odor migration in buildings resulting
More informationG- CORP SOLUTION. (SAFETY.CONSULTANCY.MANAGEMENT) ISO 9001 :2015 Certified.
G- CORP SOLUTION (SAFETY.CONSULTANCY.MANAGEMENT) ISO 9001 :2015 Certified www.gcorpsolution.com About us G-Corp Solution was formed in 2016, it is an ISO 9001 : 2015 certified, an MSME registered & membership
More informationsoaring high. scoring high. Trading Co. LLC
soaring high. scoring high. Trading Co. LLC SWITCHING GEARS TO GREATER SUCCESS Skyway tells a tale of electric growth that began in 1992. Coming a long way in its core business of electrical panel boards
More informationLA AUDIT ASSISTANCE SURVEY: Pre-survey checklist
The items below will be asked about during the Audit Assistance Survey. This document can be used as a checklist to help prepare and to reduce time taken on the day of the survey. For an Excel Version
More informationTraining Course Calendar
معهد الزامل العالي للتدريب الصناعي 2018 Training Course Calendar International accreditation State-of-the-art facilities Quality training services 1 1 Introduction Zamil Higher Institute for Industrial
More informationCURRICULUM BREAKDOWN
CURRICULUM BREAKDOWN TWO YEAR CURRICULUM - TECHNICAL COLLEGE FIRST YEAR FIRST SEMESTER Reading Blueprints Reading Schematics and Symbols Using Mathematics in the Plant Making Measurements Metals Non-Metals
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. The prime activity in this
More informationWORKPLACE EVALUATION CHECKLIST & REPORT
Work Center: Supervisor: Telephone Number: Building & Room Number: Date of Last Evaluation: Date: WORKPLACE EVALUATION CHECKLIST & REPORT ITEM YES NO N/A COMMENTS Has this area been surveyed in the last
More informationEAK AKREDITEERITAVAD TAVAD VASTAVUSHINDAMISMENETLUSED EAK INF1 2016
EAK AKREDITEERITAVAD TAVAD VASTAVUSHINDAMISMENETLUSED MENETLUSED CONFORMITY ASSESSMENT ACTIVITIES ACCREDITABLE BY EAK EAK INF1 2016 Translation from Estonian Tallinn 2016 2/7 Authorship and principles
More informationContractor Worksheet Underground Fires Major Hazard Standard
WMC Environment, Health & Safety Management System Worksheet Major Hazard Standard MHS-02 DocsOpen Ref: 57267, 17/10/2001 Uncontrolled copy check web for latest revision Revision Reviewed Description of
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification 7 11 Earsdon Road Contact: Mr David Profit West Monkseaton Tel: +44 (0)191 296 3242
More informationDAVITS INFORMATION & CERTIFICATION
Document Ref: LHS2012/06 Revision Date: 17/04/2011 Clane Business Park Clane, Co. Kildare Ph: 045-868342 Fax: 045-861447 www.liftingandhandling.ie enquiries@liftingandhandling.ie DAVITS INFORMATION & CERTIFICATION
More information-SAMPLE- Safety Inspection Checklist: Manufacturing
-SAMPLE- Safety Inspection Checklist: Manufacturing Prepared by: Midwest Builders Casualty The following procedures are not intended to be an exhaustive treatment of the subject, and should not be interpreted
More information10.6 Schedule of Accreditation
Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories
More informationAllianz Engineering Inspection Services Ltd. Electrical Services. Product Information
Allianz Engineering Inspection Services Ltd Electrical Services Product Information Electrical Testing and Inspection Services The Electricity at Work Regulations (EaWR) states that all electrical systems
More informationCHAPTER 15: FIRE PREVENTION & AWARENESS POLICY
CHAPTER 15: FIRE PREVENTION & AWARENESS POLICY PURPOSE The fire prevention plan provides information and procedures to minimize the occurrence of an accidental fire at the job site or office, and an efficient
More informationPROFILE. industrial services rental trading
PROFILE industrial services rental trading Introduction Power Corp General Trading & Contracting Company W.L.L. is incorporated by technocrats having vast experience in Engineering and Construction field
More informationAutomations Controls Experts
ACE Instrumentation Automations Controls Experts ABOUT US ACE Instrumentation is renowned as one of the best marine automation company in Singapore. Our offices are located conveniently near shipyards
More informationBP MAINTENANCE WORK INSTRUCTIONS FREQUENTLY ASKED QUESTIONS
BP MAINTENANCE WORK INSTRUCTIONS FREQUENTLY ASKED QUESTIONS The following FAQ was last updated 30/3/2016. This material is guidance only. If any of the content contradicts with requirements within the
More informationذعب ةروذلا تفلكت ةروذلا تفلكت بيرذتلا ثاعاس دذع ةروذلا ةذه مايلأا دذع ةروذلا نسا
Speak Up 00 نظرى عذد األيا بعذ Electrical Engineering Power Generation Systems (Practical) Electrical Installation in Hazardous Areas Electrical Motors; Protection, Testing and Maintenance Advanced Electrical
More informationSteel, Civil, MEP & Telecommunication Infrastructure Service Providers MEP Profile
Steel, Civil, MEP & Telecommunication Infrastructure Service Providers MEP Profile 1 Gulf Turrets Presence BAHRAIN QATAR U.A.E. - Dubai U.A.E. - Abu Dhabi OMAN ISO 9001:2008 ISO 14001:2004 OHSAS 18001:2007
More informationBULGARIAN ACCREDITATION SERVICES ACCREDITED ACCORDING TO BDS EN/ISO 17020:2005
BULGARIAN ACCREDITATION SERVICES CERTIFICATE FOR ACCREDITATION MULTITEST LTD Inspection Body of Type A Headquartered in Varna, West Industrial Zone, 1, Atanas Dalchev str., p.o.b. 161 UIC: 813141496 SCOPE
More informationWelcome to Everyone. Kia ora koutou katoa
Welcome to Everyone Kia ora koutou katoa NZ based since 1989 INTERNATIONAL WIND ENERGY SERVICES THROUGHOUT THE WHOLE VALUE CHAIN Feasibility QHSE regulations consultancy Environmental impact assessment
More informationRELEASE DEVICES RELEASE DEVICE-WPS MODELS A/B INSTALLATION MANUAL U.L. LISTED CANADIAN LISTED CSFM: :100 GENERAL DESCRIPTION:
RELEASE DEVICES MADE IN THE U.S.A. RELEASE DEVICE-WPS MODELS A/B INSTALLATION MANUAL U.L. LISTED CANADIAN LISTED CSFM: 7300-1418:100 GENERAL DESCRIPTION: S/N: The "WPS" World Power Series, Time Delay Release
More informationSprinkler System Installer Level 1
Level 1 Unit: A1 Introduction to Sprinkler System Industry Level: One Duration: 7 hours Theory: Practical: 7 hours 0 hours Overview: This unit is designed to provide the apprentice with an overview of
More informationNFPA 70E Electrical Safety & Arc Flash Training
NFPA 70E Electrical Safety & Arc Flash Training OSHA 1910.332(a) Training, 1910.332(a) Scope. The training requirements contained in this section apply to employees who face a risk of electric shock that
More informationLIST OF STANDARDS S. NO. STANDARD NO. STANDARD NAME. Recommended Practices on Oil Storage and Handling OISD-STD-109
LIST OF STANDARDS S. NO. STANDARD NO. STANDARD NAME 1. OISD-STD-105 Work Permit System 2. OISD-STD-106 Pressure Relief & Disposal System 3. OISD-RP-108 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
More informationWe are pleased to offer products covering a multitude of SIC Code categories:
We are pleased to offer products covering a multitude of SIC Code categories: Mechanical Power Transmission Equipment 3010 Torque Converters and Speed Changers 3020 Gears, Pulleys, Sprockets, and Transmission
More informationStatutory Compliance Checklist
Date of Issue: April 2017 Statutory Compliance Checklist This document is for clergy and churchwardens to help them in the maintenance of their Churches. Refer to supplementary notes for further guidance.
More informationPrésentation du. Presentation from. Ministère du travail de l Ontario. Ontario Ministry of Labour PMD 14-P1.8
Deep Geologic Repository Joint Review Panel Commission d examen conjoint du projet de stockage dans des couches géologiques profondes PMD 14-P1.8 File / dossier : 8.01.07 Date: 2014-09-09 Edocs: 4521214
More informationWIND TURBINE DAMAGE PREVENTION
WIND TURBINE DAMAGE PREVENTION SAFETY GUIDELINE 2017 1 Wind turbine damage prevention Index 1 PURPOSE... 2 2 GENERAL... 2 2.1 Technical implementation and type approval... 2 2.2 Transportation... 2 2.3
More informationOCCUPATIONAL PROFILE FIRE FIGHTING EQUIPMENT TECHNICIAN (Special Class Electrician, Fire Detection System Designer) CURRICULUM CODE:
OCCUPATIONAL PROFILE FIRE FIGHTING EQUIPMENT TECHNICIAN (Special Class Electrician, Fire Detection System Designer) CURRICULUM CODE: 1. OCCUPATIONAL PURPOSE A Fire Fighting Equipment Technician installs
More informationMarket Survey. Technical Description Supply of Helium Leak Detectors
EDMS No. 1963034 Group Code: TE-VSC Market Survey Technical Description Supply of Helium Leak Detectors Abstract This Technical Description concerns the placement of a blanket order contract for the supply
More informationNon-Destructive Testing Robot Applications in Hazardous Environments
Non-Destructive Testing Robot Applications in Hazardous Environments Professor Tariq Sattar TWI Chair and Director London South Bank Innovation Centre for Automation of NDT, Cambridge, UK INTRODUCTION
More informationOSHA Subpart F Fire Protection and Prevention
OSHA Subpart F Fire Protection and Prevention The Employer shall: Develop the fire protection program. Provide fire fighting equipment. Periodically inspect fire fighting equipment. Firefighting Equipment
More informationNATIONAL TRAINING BOARD (ELECTRICIAN) REGULATIONS 2008 BR 54/2008 NATIONAL OCCUPATIONAL CERTIFICATION ACT :38
BR 54/ NATIONAL OCCUPATIONAL CERTIFICATION ACT 2004 2004 :38 The National Training Board, with the approval of the Minister responsible for the National Training Board, in exercise of the powers conferred
More informationThe Real Time Suppliers...
The Real Time Suppliers... P.O. Box: 9377 Doha, Qatar Tel.: (+974) 44600044 / 44602263 / 44602209 Fax: (+974) 44600041 Oil & Gas Directory Middle East - 2013 257 Qatari Industrial Equipment W.L.L. INTRODUCTION
More informationSAFETY EXCELLENCE AWARD 2014 TECHNICAL SUPPORT SAFETY SURVEY FORM FINAL EVALUATION
SAFETY ECELLENCE AWARD 2014 TECHNICAL SUPPORT SAFETY SURVEY FORM FINAL EVALUATION SCORING: For each item listed below, decide if the entry meets the criteria as follows: 0 = Below Average 1 = Average 2
More informationSOLID STATE SECURITIES, INC. THE "SS90" SERIES RELEASE DEVICES MADE IN THE U.S.A. SS90-WPS MODEL A/B INSTALLATION MANUAL
S S S S S S LISTED L * PATENT PENDING S S 90 OLID TATE ECURITIES, INC SOLID STATE FAIL-SAFE UNIT U 99Y9 RESET RELEASING DEVICE SOLID STATE SECURITIES, INC. THE "SS90" SERIES RELEASE DEVICES MADE IN THE
More informationRobin Clark Health & Safety Coordinator
Robin Clark Health & Safety Coordinator safetguy@live.com 902 430-4849 Summary of Changes to N.S. OHS Regulations Prepared for clients of Kimber & Tucker, July 2013 Purpose: To update Employers and Employees
More informationCHECKLISTS ORGANIZED BY EXPOSURE CATEGORIES (SPECIFIC AGENTS OR HAZARDS; MIXTURES; MULTIMEDIA; OTHER (PROCEDURES, PROGRAMS)
CHECKLISTS ORGANIZED BY EXPOSURE CATEGORIES (SPECIFIC AGENTS OR HAZARDS; MIXTURES; MULTIMEDIA; OTHER (PROCEDURES, PROGRAMS) CHECKLIST TOPIC/TITLE PAGE NUMBERS Biological Agents Blood (Handling and Disposal)
More informationPritchitts: Contractor Control
About us Started Dairy processing in Ards 1952 First UK company to commence UHT (Ultra Heat Treatment) production 1972 Employ around 200 people in the North of Ireland and Britain Export 240 formulated
More informationBSI Kitemark A passport to opportunities in the Middle East
BSI Kitemark A passport to opportunities in the Middle East Robert Hine Head of Commercial Engagement Copyright 2016 BSI. All rights reserved. 1 BSI Group Policy, Engagement National Standards Body Assessment
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-5 First edition 2011-04-01 Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection
More informationExplosion Protection Engineering Principles
Handbook of Fire and Explosion Protection Engineering Principles for Oil, Gas, Chemical and Related Facilities Second edition Dennis P. Nolan ELSEVIER AMSTERDAM BOSTON HEIDELBERG LONDON NEW YORK OXFORD
More informationTest procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining
The Laboratory is qualified to update standards identifying the test procedures. The laboratory requires/applies a flexible scope of accreditation permitted as detailed in the Annex. Updated list of activities
More informationTSSA Fuels Safety High Pressure Piping Code, TSSA HPP-2017 November 2017
TSSA Fuels Safety High Pressure Piping Code, TSSA HPP-2017 November 2017 Technical Standards and Safety Authority Fuels Safety Program 345 Carlingview Drive Toronto, ON M9W 6N9 Tel: 1.877.682.8772 Fax:
More informationAccredited SIA ACS & ISO 9001:2001 ISO & ISO BSIA Member
Crown Security Services 9/14 Cranford Way, Birmingham, B66 2RU 1999 Established Best Security Company - Midlands 2015 Business Excellence Award - 2016 & 2017 Accredited SIA ACS & ISO 9001:2001 ISO 14001
More informationCOMPANY PROFILE.
COMPANY PROFILE contact@unitedengg.net www.unitedengg.net UNITED ENGINEERING SERVICES We conduct our business activities under different entities, out of which share common ownership but distinct and unique
More informationGENERAL INFORMATION. The candidate is allowed to bring the following items into the examination room:
GENERAL INFORMATION Introduction: This Syllabus is intended to assist candidates studying for the Second Class Refrigerator Plants (Standardized or Provincial) Certificate Examination. Application to Undertake
More informationISO INTERNATIONAL STANDARD. Mobile elevating work platforms Design, calculations, safety requirements and test methods
INTERNATIONAL STANDARD ISO 16368 Second edition 2010-05-15 Mobile elevating work platforms Design, calculations, safety requirements and test methods Plates-formes élévatrices mobiles de personnel Conception,
More informationContractor Safety. Workplace Safety & Environmental Division
Contractor Safety Workplace Safety & Environmental Division Click to edit Master title style This information is designed for tradespersons and persons supervising tradespersons who are performing work
More informationHWD DRILLING RIG PRE-SPUD SAFETY INSPECTION-HWD 1000 RIGS
HWD DRILLING RIG PRE-SPUD SAFETY INSPECTION-HWD 1000 RIGS Rig #: Operating Company: Well Name & #: Date/Time of Inspection: Inspected By: Company Man: Tool pusher: Driller: Ton Miles Logged and up to date:
More informationLIST OF OISD STANDARDS (April 2016)
LIST OF OISD STANDARDS (April 2016) 1. OISD-STD-105 Work Permit System 2. OISD-STD-106 Pressure Relief & Disposal System 3. OISD-RP-108 Recommended Practices on Oil Storage and Handling 4. OISD-STD-109
More informationVideo on Demand On-Line Training Programs
Video on Demand On-Line Training Programs Accident Investigation Backs: Elements of Back Care Backs: Safe Lifting Bloodborne Pathogens: Always Protect Yourself (HD) Bloodborne Pathogens: Control Your Exposure
More informationSERVICE PARTS/OPERATION for
T--357 Manual SERVICE PARTS/OPERATION for MCC Heater Units 12-XXXX Series T -357 REV. 05/2015 2012 Mobile Climate Control Table of Contents SAFETY SUMMARY... Safety-1 UNIT SPECIFICATIONS... Spec-1 MAINTENANCE...
More informationINITIAL ELECTRICAL ASSESSMENT REPORT (EAR)
INITIAL ELECTRICAL ASSESSMENT REPORT (EAR) Factory Name: AJ Super Garments Ltd (Woven) Aj Garden, Goshbagh Zirabo Zirabo, Savar Savar Dhaka Bangladesh 23 Mar 2014 The Alliance for Bangladesh Worker Safety
More informationGeneral. While at work your safety also depends upon your colleagues. If you observe an unsafe situation, point it out to your colleague.
General This document only serves as clarification of the Ugent Laboratory and workplace regulation (see www.ugent.be/laboreglement) and of the regulation of building 904 (See department website). Make
More informationSafety Program. Eastern Electrical Testing Corporation 2 Skyline Drive Clarks Summit, PA (570)
Safety Program Eastern Electrical Testing Corporation 2 Skyline Drive Clarks Summit, PA 18411 (570) 586-4900 Eastern Electrical Testing Corporation Safety Program Table of Contents Safety Program... Section
More informationDATA CENTRES & IT SECURITY. High security solutions
DATA CENTRES & IT SECURITY High security solutions Abloy UK is excited to introduce a new energy-saving range of products including electric locks, Protec2 CLIQ, access control and door closers. Energy-saving
More informationTHIRD EDITION. Practical. Non-Destructive Testing. Baldev Raj T. Jayakumar M. Thavasimuthu. Alpha Science International Ltd. Oxford, U. K.
THIRD EDITION Practical Non-Destructive Testing Baldev Raj T. Jayakumar M. Thavasimuthu CD Alpha Science International Ltd. Oxford, U. K. ---------------Contents Foreword Preface to the Third Edition Preface
More informationASME A17.1/CSA B44 Handbook
2016 Edition ASME A17.1/CSA B44 Handbook ASME A17.1-2016, Safety Code for Elevators and Escalators CSA B44-16, Safety Code for Elevators Kevin L. Brinkman, PE 2016 Edition ASME A17.1/CSA B44 Handbook ASME
More informationTHE IMPORTANCE OF THE RESPONSIBLE WELDING COORDINATOR IN STRUCTURAL METALWORKS ACCORDING TO THE REQUIREMENTS OF EN CE MARKING
HELLENIC WELDING ASSOCIATION THE IMPORTANCE OF THE RESPONSIBLE WELDING COORDINATOR IN STRUCTURAL METALWORKS ACCORDING TO THE REQUIREMENTS OF EN 1090-1 CE MARKING Dr. Ioannis Kordatos General Manager HWA
More informationVIBSPECTRUM INTERNATIONAL LLC
VIBSPECTRUM INTERNATIONAL LLC DUBAI HEAD OFFICE COVERING MIDDLE EAST. FUJAIRAH ABU DHABI OMAN SAUDI ARABIA An ISO 9001:2008 Certified Company ISO 14001.2004, OHSAS 18001 : 2007 Certified company. COMPANY
More informationTerex Operation Manual
Terex Operation Manual Table of Contents Outline of Operation... 3 System Components... 3 Power-Up Self-Test... 5 Home Display... 5 The Configuration Display... 6 Home Button... 7 Man Button... 7 POL Button...
More informationCryogenics. Overview of the Jefferson Lab 12GeV Upgrade. J. Creel, K. Dixon, P. Knudsen, J. Wilson Jr.
Cryogenics Overview of the Jefferson Lab 12GeV Upgrade D. Arenius,, V. Ganni, J. Creel, K. Dixon, P. Knudsen, J. Wilson Jr. Stanford Linear Accelerator Center May 9-11, 2006 Cryogenic Operations Workshop
More informationNew/Altered Equipment Review
New/Altered Equipment Review A New or Altered Equipment Review is performed when a process is changed in which a new piece of equipment is put into place, when existing equipment is altered or changed
More informationChapter 1 General...9 Article 100 Definitions...11 Article 100 Questions Article 110 Requirements for Electrical Installations...
Article 90 Introduction...1 90.1 Purpose of the NEC...1 90.2 Scope of the NEC...2 90.3 Code Arrangement...4 90.4 Enforcement...5 90.5 Mandatory Requirements and Explanatory Material...6 90.6 Formal Interpretations...6
More informationOH&S Purchasing Guidelines
OH&S Purchasing Guidelines 1. Introduction 2 2. Scope 2 3. Responsibilities 2 4. Procedure 2 4.1. Determining if an Item Impacts Health and Safety 2 4.2. Risk Assessment 4 4.3. OHS Specifications and Risk
More informationStandards: Issues and Challenges
Standards: Issues and Challenges Dave Wilson CFM Steve Maslin RIBA NRAC Director Do we need Standards in FM? Facilities Management is: a management discipline relatively young and immature industry It
More informationFirstcool BRIEF SPECIFICATION OF MATERIALS USED. INSULATION PANELS FOR COLD ROOMS REFRIGERATION UNITS CLADDING SHEETS ACCESSORIES INSULATED FLOORS
BRIEF SPECIFICATION OF MATERIALS USED. INSULATION PANELS FOR COLD ROOMS Polyurethane/PIR panels are with a density of insulation 40-42 KG/M3 Thickness 100mm, 125mm, 150mm, 200mm, Length, width and height
More informationBB TM 508/509 ANTI TWO-BLOCK ALARM SYSTEM HYDRAULIC CRANE INSTALLATION. Greer Company Crane Systems. Greer Company
BB TM 508/509 ANTI TWO-BLOCK ALARM SYSTEM HYDRAULIC CRANE INSTALLATION GREER COMPANY 1918 East Glenwood Place, Santa Ana, CA 92705 Tel: (714) 259-9702 FAX (714) 259-7626 BB TM 508/509 ANTI TWO-BLOCK ALARM
More informationLetter from GM BASIL AL HANBALI
3 Letter from GM To embark on a journey of success one needs the tools of preparedness, foresight and strategy. These lead to the path of growth and high quality operation. It is imperative to combine
More informationFirst Aspen Federal Regulation Set: K LSC 2000 Health Existing
First Aspen Federal Regulation Set: K 01.01 LSC 2000 Health Existing K 0000 Title CFR Type INITIAL COMMENTS Memo K 0011 If the building has a common wall with a nonconforming building, the common wall
More informationFirefly II Multi Voltage RELEASE DEVICES. Firefly II & IIB-MV INSTALLATION MANUAL
Firefly II Multi Voltage RELEASE DEVICES Firefly II & IIB-MV INSTALLATION MANUAL GENERAL DESCRIPTION: S/N The The Cookson Company Firefly II-MV time delay release devices are designed for use on rolling
More informationCOMDTPUB P NVIC JUNE 1995
COMDTPUB P16700.4 NVIC 3-95 19 JUNE 1995 NAVIGATION AND VESSEL INSPECTION CIRCULAR NO. 3-95 Electronic Version for Distribution on the World Wide Web Subj: PERIODIC INSPECTION AND TESTING OF FIXED HALON
More informationWinnipeg Fire Department Fire Prevention Branch
Winnipeg Fire Department Fire Prevention Branch Manitoba Fire Code Life-Safety Equipment Maintenance Requirements The Fire Prevention Branch of the Winnipeg Fire Department has prepared this document of
More informationOnline Training Catalog - Employee Safety and Health. October 2013
Online Training Catalog - Employee Safety and Health October 2013 TABLE OF CONTENTS ENVIRONMENTAL, SAFETY & HEALTH AND TRANSPORTATION COURSEWARE... 1 Environmental, Safety & Health, Transportation and
More informationAbout Us steel structures, construction activity, technical industrial goods store, webshop.
ABOUT THE COMPANY About Us I am Mr Attila László, the owner and the managing director of Jászmetál 2000 Ltd. I have been trying to build up and develop my company the way where the clients can get the
More informationProposed construction of National Institute of Homeopathy at Sec-A8, Narela Delhi by Ministry of Ayush. Risk Assessment
Risk Assessment Building and construction project involve high risk category having many associated hazards like trip slip and fall, falling material, height at work, electrical hazard, & fire etc. Adequate
More informationSUMMARY: Policy Title: Electrical Safety Work Practice Program. Policy Number: UNIV-EHS 430 Policy Approved: January 2014
Policy Title: Electrical Safety Work Practice Program Policy Number: UNIV-EHS 430 Policy Approved: January 2014 Policies Superseded: FINA-730 Policy Management Area: Environmental Health and Safety Created/Revision(s):
More information