STS Directory Accreditation number: STS 0021
|
|
|
- Emma Norman
- 6 years ago
- Views:
Transcription
1 International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 LPM AG Labor für Prüfung und Materialtechnologie Tannenweg Beinwil am See Head: Responsible for MS: Ruedi Herren Heinz Schürch Telephone: Internet: Initial accreditation: Current accreditation: to Scope of accreditation see: (Accredited bodies) Scope of accreditation as of Testing laboratory for concrete, mortar, aggregates, natural stones, plastic, reinforcing steel, surface protection/repair Various tests with multiple applications: building materials, buildings, water, wood, plastics, etc. Determination of water tightness of pipe lining systems Wear test using the grinding wheel according to Böhme Determination of abrasion, abrasive disk method (Taber) Determination of soluble salts content according to norm Determination of the sulfate content - total content Richtlinie Arbeitskreis Prüfinstitute Schlauchlining (APS, Test and inspection code of the Association of Laboratories for testing pipe lining systems) DIN DIN In-house procedure, SOP 517 In-house procedure, SOP / R Qua/aeh 0021stsvz engl.docx 1/7
2 Various tests with multiple applications: building materials, buildings, water, wood, plastics, etc. (Hardened) concrete Determination by ion chromatography IC of ammonium, calcium, potassium, magnesium and sodium content Determination by ion chromatography IC of chloride, nitrite, nitrate and sulfate content Microscopic examination (textural analysis on thin section) Sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete Determination of wear resistance- Bohme - Methods of test for screed materials Determination of ignition loss according to norm: Determination of the textile-glass and mineral-filler content; calcination methods (plastics) Determination of moisture content by drying at elevated temperature; Hygrothermal performance of building materials and products Hygrothermal performance of building materials and products - Determination of hygroscopic sorption properties Determination of flexural properties (plastics) Determination of tensile properties (plastics) Determination of pull-off (tension) strength In-house procedure, SOP In-house procedure, SOP In-house procedure, SOP's 300, 301, 303 SN EN 1008 resp. SIA SN EN resp. SIA SN EN ISO 1172 SN EN ISO resp. SIA SN EN ISO resp. SIA SN EN ISO 178 SN EN ISO 527 DIN 1048 Teil 2 Pore analysis and characterization In-house procedure, SOP 104 Determination of the porosity In-house procedure, SOP Determination of the depth of penetration of water under pressure on cored specimens In-house procedure, SOP / R Qua/aeh 0021stsvz engl.docx 2/7
3 (Hardened) concrete Determination of Metallic Fiber Content (metallic fibre reinforced concrete) Determination of water infiltration rate Determination of the resistance to chlorides Determination of the Freeze-thaw resistance Determination of the resistance to sulfates Determination of shrinkage SIA 162/6 resp. SN /6 SIA 262/1 appendix A resp. SIA 262/1 appendix B resp. SIA 262/1 appendix C resp. SIA 262/1 appendix D resp. SIA 262/1 appendix F resp. Determination of the Elastic Moduli SIA 262/1 appendix G resp., repealed annex according to SIA 262/1-C1 Determination of resistance to carbonation Determination of the flexural tensile strength according to norm: Betondecken Diagnostic determination of the Freeze-thaw resistance BE I FT according to norm: Betondecken - Prüfmethoden zur Bestimmung des Frost- und Frosttaumittelwiderstands Diagnostic determination of the Freeze-thaw resistance BE I F of the Freeze resistance according to norm: Betondecken - Prüfmethoden zur Bestimmung des Frost- und Frosttaumittelwiderstands Physical determination of the Freeze-thaw resistance BE II FT according to norm: Betondecken - Prüfmethoden zur Bestimmung des Frost- und Frosttaumittelwiderstands SIA 262/1 appendix I resp. SN / R Qua/aeh 0021stsvz engl.docx 3/7
4 (Hardened) concrete Cement Fresh concrete and mortar Physical determination of the Freeze-thaw resistance BE II F of the Freeze resistance according to norm: Betondecken - Prüfmethoden zur Bestimmung des Frost- und Frosttaumittelwiderstands Determination of secant modulus of elasticity in compression Compressive Strength of test specimens Determination of Textural strength of test specimens Determination of Tensile splitting strength of test specimens Determination of the depth of penetration of water under pressure Determination of resistance to carbonation - Products and systems for the protection and repair of concrete structures Pore analysis, spacing factor according to norm: Determination of air void characteristics in hardened concrete; Admixtures for concrete, mortar and grout. Test methods Determination of Strength (flexural strength) Determination of Strength (compressive strength) Determination of the water content of freshly mixed concrete Determination of water-soluble chloride content of fresh mortars - mortar for masonry Slump test Determination of degree of compactability SN EN bzw. SIA SN EN resp. SIA SN EN resp. SIA SN EN resp. SIA SN EN resp. SIA SN EN resp. SIA In-house procedure, SOP 200 SN EN resp. SIA SN EN resp. SIA SIA 262/1 appendix H resp. SN EN resp. SIA SN EN resp. SIA SN EN resp. SIA / R Qua/aeh 0021stsvz engl.docx 4/7
5 Fresh concrete and mortar Flow table test SN EN resp. SIA Determination of Density Determination of air content; Pressure methods Concrete structures and elements Determination of carbonation depth in hardened concrete (microscopic) Taking, examining and testing in compression cored specimens of concrete in structures Determination of resistance of capillary absorption - Products and systems for the protection and repair of concrete structures Determination of chloride content in hardened concrete - Products and systems for the protection and repair of concrete structures (hot water dilution) Determination of chloride content in hardened concrete (nitric acid digestion) - Products and systems for the protection and repair of concrete structures Determination of carbonation depth in hardened concrete by the phenolphthalein method - Products and systems for the protection and repair of concrete structures Tensile testing according to norm: Test methods of reinforcing bar, wire rod and wire Determination of the shear force of knots of welded fabric according to norm: Test methods of welded fabric (reinforcement) Concrete and mortar: in situ tests Measurement of the pull-off strength of finished screeds SN EN resp. SIA SN EN resp. SIA SIA 162/3 resp. SN /3, norme abrogée SN EN resp. SIA SN EN resp. SIA In-house procedure, SOP 515 SN EN resp. SIA SN EN resp. SIA SN EN ISO resp. SIA SN EN ISO SIA 251 resp. SN , chap / R Qua/aeh 0021stsvz engl.docx 5/7
6 Concrete and mortar: in situ tests Measurement of the pull-off strength of floor coverings Protection and coating systems, coating materials, paints, impregnations, hydrophobics Methods of test for screed materials - Part 8: Determination of bond strength Measurement of bond strength by pull-off Determination and classification of liquid-water transmission rate (permeability) of coating materials and coating system Determination of the water absorption coefficient according to norm: Determination and classification of liquid-water transmission rate (permeability) of coating materials and coating system Determination of carbon dioxide permeability Determination of crack bridging properties Determination of compressive strength of repair mortar (Products and systems for the protection and repair of concrete structures) Determination of shrinkage and expansion Determination of modulus of elasticity in compression (Products and systems for the protection and repair of concrete structures) Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) Measurement of bond strength by pull-off SIA 252 resp. SN SN EN resp. SIA SN EN 1542 resp. SIA SN EN In-house procedure, SOP 101 SN EN SN EN , modified procedure SN EN resp. SIA SN EN resp. SIA SN EN resp. SIA SN EN resp. SIA SN EN resp. SIA SN EN 1542 resp. SIA / R Qua/aeh 0021stsvz engl.docx 6/7
7 Protection and coating systems, coating materials, paints, impregnations, hydrophobics (Mineral-) aggregates, sand, gravel, coarse aggregates, crushed stones, filler, unbound materials, etc. Rocks, natural stones Determination of the coefficient of thermal expansion of protection systems and repair products Measurement of coating thickness. Microscopical method Cross-cut test (Paints and varnishes) Determination and classification of water-vapour transmission rate (permeability) of coating materials and coating system Determination of loose bulk density and voids of aggregates Determination of particle density and water absorption of aggregates Determination of particle size distribution of aggregates - Sieving Method Tests for geometrical properties of aggregates - Classification test for the constituents of coarse recycled aggregate Determination of Particle Shape of aggregates - Flakiness Index Determination of flexural strength under concentrated load Determination of uniaxial compressive strength SN EN 1770 resp. SIA SN EN ISO 1463 SN EN ISO 2409 SN EN ISO 7783 SN EN resp. SN SN EN resp. SN SN EN resp. SN SN EN resp. SN SN EN resp. SN SN EN resp. SIA SN EN 1926 resp. SIA * / * / * / * / * / R Qua/aeh 0021stsvz engl.docx 7/7
STS Directory Accreditation number: STS 0030
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 BSL Baustofflabor AG Postgässli 23a 3661 Uetendorf Head: Felix Solcà Responsible for MS: Dr. Benjamin Kaeser Telephone:
STS Directory Accreditation number: STS 0133
STS Directory Accreditation number: STS 033 International standard: ISO/IEC 7025:2005 Swiss standard: SN EN ISO/IEC 7025:2005 TFB AG Technology and research in concrete construction Lindenstrasse 0 503
STS Directory Accreditation number: STS 0329
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 Laboroute SA Laboratoire de recherche et de contrôle des matériaux routiers Route de l Industrie 78 CH-1564 Domdidier
STS Directory Accreditation number: STS 0099
International standard: ISO/IEC 7025:2005 Swiss standard: SN EN ISO/IEC 7025:2005 Prüflabor AG ( ) Rorschacherstrasse 07 9402 Mörschwil Subsidiary: Prüflabor AG ( 2) Müllheimerstrasse 5 8554 Müllheim-Wigoltingen
The Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 19 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
The Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 17 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
Aggregates Table 1 No. Title Options
Aggregates Table 1 BS EN 932-1 Methods for sampling From stockpiles BS EN 932-2 Methods for reducing laboratory samples BS EN 932-3 BS EN 933-1 BS EN 933-2 Procedure and terminology for simplified petrographic
Joint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania
page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested
The Laboratory is qualified to update standards identifying the test procedures. Test procedure/ method identification
Testing laboratory locations: 1. Testing Laboratory in Prague (0100) Prosecká 811/76a, 190 00 Praha 9 2. Testing Laboratory in České Budějovice (0200) 3. Testing Laboratory in Plzeň (0300) Zahradní 15,
The Laboratory is qualified to update standards identifying the test procedures. The Laboratory is qualified to carry out independent sampling.
Testing laboratory locations: 1. Testing Laboratory in Prague (0100) Prosecká 811/76a, 190 00 Praha 9 2. Testing Laboratory in České Budějovice (0200) 3. Testing Laboratory in Plzeň (0300) Zahradní 15,
STS Directory Accreditation number: STS 0016
International standard: ISO/IEC 1705:005 Swiss standard: SN EN ISO/IEC 1705:005 IMP Bautest AG Institut für Materialprüfung Hauptstrasse 591 465 Oberbuchsiten (lab. 1) Office Murten (lab. ) Office Finhaut
Nomenclature. 1.4 Sand equivalent dimensions measurement, weight measurement STN EN PP-001 X
Scope of the accreditation Name of the accredited body: Building testing and research institute, n. o. Studená 3, 821 04 Bratislava, Slovakia Testing laboratory ID Number: 31 821 987 Testing workplace
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Wolverhampton Laboratory Millfields Road Ettingshall Wolverhampton
Introduction. A soil is an earth concrete. Composition of a soil
Introduction Soil is the result of the transformation of the underlying rock under the influence of a range of physical, chemical and biological processes related to biological and climatic conditions
SOIL MIX Belgian research activities SOIL MIX PROJECT IWT
1 SOIL MIX Belgian research activities SOIL MIX PROJECT IWT 080736 Nicolas Denies and Noël Huybrechts Belgian Building Research Institute Geotechnical Division JFB Soutènements Lille 12 mai 2011 2 Topics
Aggregate Testing Test List
Aggregate Testing - 2017 Test List Aggregate Mechanical and Physical Testing Aggregate Abrasion Value (AAV) BS EN 1097-8: Annex A Aggregate Crushing Value (ACV) BS 812: Part 110 Aggregate Impact Value
Aggregate Testing Test List
Aggregate Testing - 2018 Test List Aggregate Mechanical and Physical Testing Aggregate Abrasion Value (AAV) BS EN 1097-8: Annex A Aggregate Crushing Value (ACV) BS 812: Part 110 Aggregate Impact Value
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: The Sherard Building Edmund Halley Road Oxford
SECTION STRUCTURAL SOIL
SECTION 329110 STRUCTURAL SOIL PART 1 - GENERAL 1.1 RELATED DOCUMENTS 1.2 SUMMARY A. This work shall consist of manufacturing and supplying a narrowly graded rock to support pavement without compression
هيي ة الا شغال العامة ا دارة الجودة و السلامة قسم المختبرات - وحدة مراقبة المختبرات. Turkish Standards Institution Laboratories (TSE) - Turkey
Turkish Standards Institution Laboratories (TSE) - Turkey Tel: 44950200 Fax: 44951200 e. mail: Quality&Safety@ashghal.gov.qa 106 Testing Field/ Material Page Testing Field/ Material Page Number Number
TEST REPORT No PS/OO3/07
CIVILENGINEERINGINSTITUTEOFCROATIA,d.d. Zagreb Tel. +385 1/61 25 125 (operator), +3851/6125156 (laboratory) a RN 21228808 Zagreb, 2007-07-04 TEST REPORT No 2122-02-PS/OO3/07 Client: CorteCros d.o.o., 10000
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Bucknalls Lane Garston Watford Hertfordshire WD25 9BA Contact: Alvaro Enquita-Gonzalez Tel: +44 (0)1923-665350 Fax: +44 (0)1923-665452 E-Mail:
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 13383-1:2002 Armeeritud kivi. Osa 1: Spetsifikatsioon Armourstone - Part 1: Specification EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN
STS Directory Accreditation number: STS 0009
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 Mettler-Toledo GmbH ENL Testing Laboratory Heuwinkelstrasse 3 8606 Naenikon SWITZERLAND Head: Bernhard Merk Responsible
Definitions in Handbook
HORT325: Soils & Fertilizers Soil Composition Soil Texture/Structure & Water Capacity Soil ph & Nutrient Availability Fertilizers Soil Testing Definitions in Handbook Soil Structure Soil Porosity Pore
DECLARATION OF PERFORMANCE
Flooring Declaration of Performance Edition 01.07.2013 Identification no. Version no. 01 EN 1504-2: 2004 13 0921 EN 13813: 2002 DECLARATION OF PERFORMANCE Declaration of performance 1. Product Type Unique
Annex of the certificate (Page 1/5) Accreditation Scope
Annex of the certificate (Page 1/5) Accreditation Scope As a Testing Laboratory Tested Materials / Products EX LABORATORY Metallic materials Construction products Address: Küçük Çiğli Mh. 8780/1 Sk. No:5
DECLARATION OF PERFORMANCE
Flooring Declaration of Performance Edition 01.07.2013 Identification no. Version no. 01 EN 1504-2: 2004 08 0921 EN 13813: 2002 DECLARATION OF PERFORMANCE Declaration of performance 1. Product Type Unique
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 13892-1:2002 Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test Methods of test for screed materials - Part 1: Sampling, making and curing
International Research Journal of Engineering and Technology (IRJET) e-issn: Volume: 04 Issue: 05 May p-issn:
International Research Journal of Engineering and Technology (IRJET) e-issn: 239-6 Volume: 4 Issue: May -217 www.irjet.net p-issn: 239-72 AN EXPERIMENTAL STUDY ON STRENGTH PROPERTIES OF VERMICULITE CONCRETE
SKG-IKOB Certificatie B.V. Trading under the names SKG, IKOB-BKB and SKW Certificatie
Normative document: EN ISO/IEC 7025:2005 This annex is valid from: 24-0-208 to 0-2-202 Replaces annex dated: 06-2-206 Location(s) where activities are performed under accreditation Head Office Poppenbouwing
CUTTING EDGE TURF PRODUCTS
CUTTING EDGE TURF PRODUCTS Pallet-Item # 400401PT 0.75 CU. FT. CUTTING EDGE PREMIUM TOP SOIL Screened At 3/8 of an Inch Can Be Used for New Lawns, Gardens and Flower Pots Can Assist Seed Germination Can
This annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Presley House Presley Way Crownhill Milton Keynes MK8 0ES United Kingdom Contact: Jeremy Hodge Tel: +44 (0) 1908 267300 Fax: +44 (0) 1908
Darcy's law 16 Deformation 23-32, 53, 98-99, ; elastic 19-20, 148-
INDEX Aeration estimation 210-213; modeling 216-217 Aggregate breakup 20, 53-56 Aggregate bulk density 13 Aggregate size distribution 109 Aggregate stability 60-70, 83-86, 89, 90, 93, 224, 231, 240; rate
DECLARATION OF PERFORMANCE
Flooring Declaration of Performance Edition 01.07.2013 Identification no. Version no. 01 EN 1504-2: 2004 08 0921 EN 13813: 2002 DECLARATION OF PERFORMANCE Declaration of performance 1. Product Type Unique
This annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Florijnweg 6 6883 JP Velp (Gelderland) The Netherlands Location(s) where activities are performed under accreditation Head Office Location Abbreviation/ location code Main Location Florijnweg 6 6883 JP
Tile Tech Warnings. Paving America one step at a time! MANUFACTURER OF DETECTABLE WARNING PAVERS AND TILES
Tile Tech Warnings Paving America one step at a time! MANUFACTURER OF DETECTABLE WARNING PAVERS AND TILES 2 T a b l e o f C o n t e n t s Applications Roof Decks Plaza Decks Pool Decks... 3 Warning Pavers
List of tests (2018)
SRI Center for Physical Sciences and Technology Textile Institute Department of Textiles Physical-Chemical testing List of tests (2018) 1. Fibre content analysis 1.1 Melting point determination ISO/TR
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 1469:2005 Looduslikust kivist tooted. Välisvooderdusplaadid. Nõuded Natural stone products - Slabs for cladding - Requirements EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
Soil Structure, Density, and Porosity. Laboratory #4
Soil Structure, Density, and Porosity Laboratory #4 Objectives Understand the concept of soil structure and how it differs from soil texture. Understand how soil structure influences other soil properties.
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60455-2 Edition 3.0 2015-06 Resin based reactive compounds used for electrical insulation Part 2: Methods of test INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 17.220.99; 29.035.01
A Turf and Soil Fertility Product. Better Turf Performance Through Improved Soils.
A Turf and Soil Fertility Product Better Turf Performance Through Improved Soils. Turf-Gyp+ Promotes Turf and Soil Fertility Turf-Gyp+ provides vital nutrients and is a soil conditioner in one product.
http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se http://www.sis.se SVENSK STANDARD SS-EN 14845-1:2007 Fastställd 2007-07-11 Utgåva 1 Provning av fibrer för betong Del 1: Referensbetong
Andrew Cooper Cooper Research Technology. Talar du engelska?
Andrew Cooper Cooper Research Technology Talar du engelska? 1 Topics of this presentation EN12697-26 Stiffness EN12697-25 Cyclic compression EN12697-24 Fatigue EN12697-22 Wheel tracking EN12697 Specimen
Provning av sprutbetong Del 7: Fibermängd hos fiberarmerad betong
SVENSK STANDARD SS-EN 14488-7:2006 Fastställd 2006-04-20 Utgåva 1 Provning av sprutbetong Del 7: Fibermängd hos fiberarmerad betong Testing sprayed concrete Part 7: Fibre content of fibre reinforced concrete
Road Soil. Curtis F. Berthelot Ph.D., P.Eng. Department of Civil Engineering. Road Soil Introduction
Road Soil Characterization ti By: Curtis F. Berthelot Ph.D., P.Eng. Department of Civil Engineering Road Soil Introduction Roads are constructed of layered heterogeneous multiphase geo-materials that exhibit
LABORATORY SERVICES. Update 18/11/2015. Preparation department
LABORATORY SERVICES Update 18/11/2015 Preparation department The ACCREDIA account doesn't involve the approvation of the products from part of the laboratory and account organization. 11001 11002 Dispersion
Soils and Soil Science. Perspective. Earth Radius: 4000 miles Surface area: 200 million mi 2 Oceans: 140 million mi 2 Land: 60 million mi 2
Soils and Soil Science Perspective Earth Radius: 4000 miles Surface area: 200 million mi 2 Oceans: 140 million mi 2 Land: 60 million mi 2 Circumference: 25,048 mi (25,000 mi) When was it determined that
The Exciting World Beneath Our Feet.
SOIL The Exciting World Beneath Our Feet. Physical properties of soil Texture Structure Particle density Bulk density Pore space Water relations Plasticity Soil tilth is the term used in publications aimed
STUDY ON DURABILITY PROPERTIES OF PERLITE INCORPORATED CONCRETE
International Journal of Civil Engineering and Technology (IJCIET) Volume 9, Issue 10, October 2018, pp. 1545 1553, Article ID: IJCIET_09_10_154 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=9&itype=10
CHAPTER 4 EXPERIMENTAL WORK 4.1 GENERAL
CHAPTER 4 EXPERIMENTAL WORK 4.1 GENERAL In the present chapter engineering properties of subgrade soils, moorum and aggregate used in the investigation are presented. The details of geotextiles and geogrids
Građevinski laboratorij d.o.o. Borongajska cesta 84, HR Zagreb Laboratorij Sesvete Slatinska 7, HR Sesvete
PRILOG POTVRDI O AKREDITACIJI br: Annex to Accreditation Certificate Number: Klasa/Ref. No.: 383-02/11-30/063 Urbroj/Id. No.: 569-02/3-12-39 Datum izdanja priloga /Annex issued on: 2012-12-03 Norma: HRN
Lecture-4. Soil Compaction. Dr. Attaullah Shah
Lecture-4 Soil Compaction Dr. Attaullah Shah 1 Compaction The process of bringing the soil particles closer to a dense state by mechanical means. The voids are reduced by expulsion of air and the soil
An Introduction to Soil Stabilization for Pavements
An Introduction to Soil Stabilization for Pavements J. Paul Guyer, P.E., R.A. Paul Guyer is a registered mechanical engineer, civil engineer, fire protection engineer and architect with over 35 years experience
Two-Lift Concrete Paving & Use of Geotextiles as a Bond Breaker
October 9, 2007 Two-Lift Concrete Paving & Use of Geotextiles as a Bond Breaker Suneel N. Vanikar, P.E. Concrete Team Leader 2009 Virginia Concrete Conference Long Life Concrete Pavement International
Assessing condensation problems in hydrophobic mineral fiber
WUFI How to Assessing condensation problems in hydrophobic mineral fiber Issued: 2017-07 Contents 1. Basics 2. Proceeding in WUFI 3. Example 4. Collection of critical values 2 Basics Glaser method The
SCESm Directory Accreditation number: SCESm 0003
International standard: ISO/IEC 17021-1:2015 Swiss standard: SN EN ISO/IEC 17021-1:2015 Bureau Veritas Switzerland AG Grossächerstrasse 25 Postfach 165 8104 Weiningen ZH Head: Responsible for MS: Pascal
International Journal of Advance Engineering and Research Development. Soil Stabilization Using Terrazyme
Scientific Journal of Impact Factor (SJIF): 4.14 International Journal of Advance Engineering and Research Development Volume 3, Issue 12, December -2016 Soil Stabilization Using Terrazyme e-issn (O):
Scope of accreditation
WINS001 Plastics : fittings valves Dimensions : Wall thickness, diameter, angle, length EN ISO 3126 NBN T42-402 (1978) WINS002 Plastics Longitudinal reversion NBN EN ISO 2505 NBN EN 743 (1994) NBN T42-603
A Study on Stabilization of Subgrade Soil Using Natural Fibers (Coir and Jute)
A Study on Stabilization of Subgrade Soil Using Natural Fibers (Coir and Jute) M. Mohan 1, L. Manjesh Research Scholar, Department of Civil Engineering, UVCE, Bangalore University, Bengaluru, Karnataka,
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 14845-1:2007 Test methods for fibres in concrete - Part 1: Reference concretes Test methods for fibres in concrete - Part 1: Reference concretes EESTI STANDARDIKESKUS EESTI STANDARDI
Subsoil conditions are examined using test borings, provided by soil engineer (geotechnical).
SOIL & FOUNDATION TYPES: Subsurface investigations: Subsoil conditions are examined using test borings, provided by soil engineer (geotechnical). Number of borings and location of borings depends on building
If your soil has a high salinity content, the plants
E-60 7-01 Managing Soil Salinity Tony Provin and J.L. Pitt* If your soil has a high salinity content, the plants growing there will not be as vigorous as they would be in normal soils. Seeds will germinate
ATTACHMENT A BIORETENTION SOIL SPECIFICATION
1.00 BIORETENTION SOIL ATTACHMENT A BIORETENTION SOIL SPECIFICATION Bioretention soil shall achieve an initial infiltration rate of at least 8-inch per hour nor more than 20 inches per hour in situ and
Soils and Fertilizers. Leo Espinoza Soils Specialist
Soils and Fertilizers Leo Espinoza Soils Specialist 2004 What is soil? A collection of organic and inorganic bodies on the earth s surface, modified by the surrounding environment or even made by humans,
Sýnishorn Specification for mortar for masonry - Part 2: Masonry mortar
ÍST EN 998-2:2016 Gildistaka 15.2.2017 ICS: 91.1 Kröfur til múrs til nota í múrvirki - Hluti 2: Múr til nota í múrvirki Specification for mortar for masonry - Part 2: Masonry mortar Staðfestur af Staðlaráði
Pr gyp. A Soil and Plant Fertility Product. Improves Soil Fertility; Promotes Conservation and Sustainable Agriculture
Pr gyp TM A Soil and Plant Fertility Product Improves Soil Fertility; Promotes Conservation and Sustainable Agriculture Progyp Promotes Soil and Plant Fertility and Sustainable Agriculture Progyp is a
2016 Area 3 Envirothon Muskingum County Soils Test ANSWER KEY
2016 Area 3 Envirothon Muskingum County Soils Test ANSWER KEY 1. The majority of the bedrock in Muskingum County is. a. sedimentary bedrock b. glacial bedrock c. igneous bedrock d. metamorphic bedrock
Liner Construction & Testing Guidance Overview
Liner Construction & Testing Guidance Overview Ruben Meza, Jr., P.E. Waste Permits Division Municipal Solid Waste Permits Section 2017: TCEQ Environmental Trade Fair Agenda Summary of Revised Guidance
Effect of Fertilizers on Soil Strength
Effect of Fertilizers on Soil Strength Varsha C Paul 1, Jiss K Abraham 2 1 M.tech, Geomechanics and Structures, Department of Civil Engineering, Saintgits College of Engineering, Kottayam, Kerala, India.
Soil Physical Properties
Soil Physical Properties ESRM 311 SEFS 507 Some examples of mineral soil development eg, Rock Weathering Types of Weathering Physical/Mechanical Chemical Biological Photo by D Vogt CO 2 + H 2 O H 2 CO
SECTION PLANTING SOIL for SOIL CELLS. This specification defines material and performance requirements for soils which are to be used
This specification defines material and performance requirements for soils which are to be used within the Silva Cell system. The SPECIFICATION EDITOR must select the type of soil appropriate to each particular
Influence of Different Materials to Improve the Stabilization of Black Cotton Soil
IJIRST International Journal for Innovative Research in Science & Technology Volume 4 Issue 3 August 2017 ISSN (online): 2349-6010 Influence of Different Materials to Improve the Stabilization of Black
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 1062-6:2002 Paints and varnishes - Coating materials and coating systems for exterior masonry and concrete - Part 6: Determination of carbon dioxide permeability Paints and varnishes
DIRT! APES Laboratory Activity
Name: Part I: Soil Texture DIRT! APES Laboratory Activity Can one determine the texture of soil by examining the particles found in a particular sample? The purpose of this activity is to determine the
NATURAL STONE PRODUCTS - MODULAR TILES - REQUIREMENTS IRISH STANDARD I.S. EN 12057:2004. Price Code. Údarás um Chaighdeáin Náisiúnta na héireann
IRISH STANDARD I.S. EN 12057:2004 ICS 91.100.15 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie NATURAL STONE PRODUCTS -
27/01/2017. This event is being run by SAC Consulting. What is Soil?
This event is being run by SAC Consulting What is Soil? 1 Soil Texture It describes the physical composition of the soil % of sand, silt and clay Refers to the mineral fragments of the soil only water
Soil Management: the basis of sustainable agriculture
Soil Management: the basis of sustainable agriculture FAB-465 Lecture 11 Lecture Outline Soil Formation Soil Structure/Texture Indicators of Soil Health or Fertility Soil Conservation Practices 1 Soil
Soil Quality / Understanding Soil Health what are we missing?
Soil Quality / Understanding Soil Health what are we missing? Soil Quality Test Kit Clarence Chavez Soil Scientist The USDA is an Equal Opportunity Provider and Employer Soils are not machines: It s an
Effect of Combining Silicate and Silane Type Surface Penetrants on Restraint to Deterioration in Concrete
Effect of Combining Silicate and Silane Type Surface Penetrants on Restraint to Deterioration in Concrete Ryosuke Nakajima 1 and Hiroaki Tsuruta 2* 1 Graduate School of Science and Engineering, Kansai
IAS Accreditation Number Applied Research Laboratories of South Florida, LLC 5371 Northwest 161st Street Miami, Florida 33014
IAS Accreditation Number Company Name Address Contact Name TL-222 of South Florida, LLC 5371 Northwest 161st Street Miami, Florida 33014 John Lewczak Director of Quality Assurance Telephone (305) 624-4800
The following general requirements will be met for all planter box installations:
Greenville County Technical Specification for: WQ-25 PLANTER BOX 1.0 Planter Box 1.1 Description Planter boxes are designed to capture and temporarily store stormwater runoff. Planter Boxes are intended
FRESH AND HARDENED CONCRETE TESTING
CONCRETE CUBE MOULDS LT -B000 LT -B0006 LT -B0007 LT -B0008 STANDARDS: EN 2390-, ASTM C39, C92 PRODUCT CODE: LT- B000 & LT- B0004 Hard plastic or steel cube moulds are manufactured in accordance to dimensions
Title: Lecture 16 Soil Water and Nutrients Speaker: Teresa Koenig Created by: Teresa Koenig, Kim Kidwell. online.wsu.edu
Title: Lecture 16 Soil Water and Nutrients Speaker: Teresa Koenig Created by: Teresa Koenig, Kim Kidwell online.wsu.edu Photos courtesy of Rich Koenig Photos courtesy of USDA NRCS Soil Water and Nutrients
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames.
2 Pine Trees, Chertsey Lane, Staines-upon-Thames. TW18 3HR Unit 8B, B W Estates Oldmixon Crescent Weston-super-Mare North Somerset BS24 9BA Contact: Mr K D James Tel: +44 (0)1934-644866 Fax: +44 (0)1934-413909
Main changes to draft SR 21:2013 Hardcore material for use under concrete floors
Main changes to draft SR 21:2013 Hardcore material for use under concrete floors Engineers Ireland 5 th November 2013 Sarah Neary BE MBA CEng MIEI Senior Adviser Building Standards Environment, Community
Puricare s approach to Brackish Water Irrigation and Saline Soils
Puricare s approach to Brackish Water Irrigation and Saline Soils During dry summer months many farmers experience serious problems with the increased salinity of irrigation water due to more intensive
Haridarshan Instru-Lab
+91-8048764513 Haridarshan Instru-Lab https://www.haridarshan.co.in/ Since our commencement we have been recognized in the market as supplier and trader of Testing Equipment and Instruments. We have gained
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
ccredited to Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK 40 Grosvenor Gardens London SW1W 0EB ontact: Mr P Tate Tel: +44 (0)20
Soil. Acidic soils... 1/19/2014
Soil Chapter 8 Acidic Soils & Salt Affected Soils Pages 229 262 About 2.5 billion acres of mostly cultivated lands are affected by soil salinity Treating ph problems is less difficult than managing and
Break Layers. A guide to the design and specification of capillary break, salt barrier and frost barrier layers.
Break Layers A guide to the design and specification of capillary break, salt barrier and frost barrier layers. Upward movement of water in fine grained soil is a natural process that is usually beneficial
Behaviour of Black Cotton Soil Reinforced with Sisal Fibre
10th National Conference on Technological Trends (NCTT09) 6-7 Nov 2009 Behaviour of Black Cotton Soil Reinforced with Sisal Fibre Santhi Krishna K. M Tech Student Department of Civil Engineering College
SCESm Directory Accreditation number: SCESm 0047
International standard: ISO/IEC 17021-1:2015 Swiss standard: SN EN ISO/IEC 17021-1:2015 QS Zürich AG Postfach 6335 8050 Zürich QS Zürich AG Branch Basel Erlenstrasse 31 4106 Therwil Head: Responsible for
Compaction. Compaction purposes and processes. Compaction as a construction process
Compaction Compaction purposes and processes Specification and quality control Moisture condition value Compaction is a process that brings about an increase in soil density or unit weight, accompanied
TECHNICAL DOCUMENT. Technical document Relative to veture products.
TECHNICAL DOCUMENT Built-up cladding products, veture, cladding products and soffit products Technical document 15-02 Relative to veture products. Technical document 15-05 rev 00 28/02/2018 CENTRE SCIENTIFIQUE
Effect of Woven Polyester Geotextile on the Strength of Black Cotton Soil
Effect of Woven Polyester Geotextile on the Strength of Black Cotton Soil Rishi Srivastava 1, Shalinee Shukla 2, R.P. Tiwari 3, Ayush Mittal 4 P.G. Student, Department of Civil Engineering, MNNIT Allahabad,
This document is a preview generated by EVS
EESTI STANDARD EVS-EN 13121-2:2003 GRP paagid ja anumad kasutamiseks ülalpool maapinda. Osa 2: Komposiitmaterjalid. Keemiline vastupidavus GRP tanks and vessels for use above ground - Part 2: Composite
Masonry. Landscape Product Guide. what can you build with Selkirk?
Masonry Landscape Product Guide what can you build with Selkirk? Sorrento Stone Coastally inspired Sorrento Stone looks like it sounds. Richly textured for less slip resistance resulting in a stunning
Laboratorija za ispitivanje građevinskih materijala MMLab d.o.o. Kotor Lasta Grbaljska bb, Kotor
Dodatak Sertifikatu o akreditaciji - identifikacio : ATCG-0042 Annex to Accreditation Certificate-Identification Number:ATCG-0042 Dodatak Sertifikatu o akreditaciji sa akreditaciom em Li 15.21 Annex to