Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 ccredited to Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, hertsey Lane, Staines-upon-Thames, TW18 3HR, UK 40 Grosvenor Gardens London SW1W 0EB ontact: Mr P Tate Tel: +44 (0) Fax: +44 (0) tate@sandberg.co.uk Website: below s covered by the organisation and their relevant activities Laboratory locations: details ctivity code 5 arpenters Place lapham High Street London SW4 7TD Tel: +44 (0) Fax: +44 (0) Geology: Mr D Ellis ellis@sandberg.co.uk ggregates & oncrete: Mr R Rogerson rogerson@sandberg.co.uk Testing of aggregates, bricks and blocks, concrete, construction materials, cement, mortar, paints, rock, roofing slate, building stone and natural stone, Steel ouplers, Nuts and Bolts hemistry: Mr G Mayers mayers@sandberg.co.uk Geomaterials: Mr M Eden eden@sandberg.co.uk Building: Mr R Lucas lucas@sandberg.co.uk 40 Grosvenor Gardens London SW1W 0EB ontact: Mr S Morris morris@sandberg.co.uk Testing of Metals, lloys, Metal Products, Weldments, Reinforcing Steels, Steel ouplers Tel: +44 (0) Fax: +44 (0) ssessment Manager: TD Page 1 of 14

2 Schedule of ccreditation United Kingdom ccreditation Service ccredited to Site activities performed away from the locations listed above: details ctivity code ll sites suitable for the activities listed Tel: +44 (0) Fax: +44 (0) ontact: ggregates & oncrete : Mr R Rogerson rogerson@sandberg.co.uk Building: Mr R Lucas lucas@sandberg.co.uk Sampling and testing of concrete structures, floors and other paved surfaces, curtain walling, metals, alloys, metal products D Metallurgy: Mr S Morris morris@sandberg.co.uk ssessment Manager: TD Page 2 of 14

3 Schedule of ccreditation United Kingdom ccreditation Service ccredited to DETIL OF REDITTION GGREGTES Water-soluble chloride salt content BS EN : :2012 Sulphate content of a 2:1 water/aggregate extract BS EN : :2012 Total sulfur content BS EN : :2012 Total sulphate content by acid extraction BS EN : :2012 cid soluble sulfides BS EN : :2012 cid-soluble material content BS :1985 Potential reactivity (chemical method) Petrographic examination of aggregates for concrete Qualitative and quantitative petrographic description of aggregates STM STM 295/295M-12 BS :1994 Petrographic description BS EN 932-3:1997 Identification of type and variety, mineralogical composition, particle characterization, weathering and alteration, potential alkali-silica and alkali-carbonate reactive ingredients Particle density and water absorption for aggregate between 40 mm and 5 mm Particle density and water absorption for aggregate between 10 mm nominal size and smaller No TP/G1/3 using optical microscopy and polarized light techniques BS EN :2013 BS EN :2013 ssessment Manager: TD Page 3 of 14

4 Schedule of ccreditation United Kingdom ccreditation Service ccredited to GGREGTES (cont d) Particle size distribution - washing and sieving BS EN 933-1:2012 Flakiness index BS EN 933-3:2012 Water content - oven drying method Magnesium sulphate soundness Resistance to fragmentation by the Los ngeles method BS EN :2008 BS EN :2009 BS EN :2010 GGREGTES for railway ballast Modified Los ngeles method BS EN :2010 LY BRIKS Soluble salt content BS 3921:1985 (withdrawn) ompressive strength BS 3921:1985 (withdrawn) Water absorption BS 3921:1985 (withdrawn) Petrographic examination Determination of the active soluble salts content of clay masonry units Determination of water absorption by boiling in water Water absorption by cold water absorption TP/G29 based on STM 856 BS EN 772-5: 2016 BS EN 772-7:1998 BS EN :2011 ssessment Manager: TD Page 4 of 14

5 Schedule of ccreditation United Kingdom ccreditation Service ccredited to EMENT Loss on ignition BS EN 196-2:2013 Gravimetric determination of sulphate Residue insoluble in hydrochloric acid and sodium carbonate BS EN 196-2:2013 BS EN 196-2:2013 hloride content BS EN 196-2:2013 lkali content BS EN 196-2:2013 hemical analysis of Portland cement No based on BS :1970 ompressive strength BS EN 196-1:2016 Standard consistence BS EN 196-3:2005+1:2008 Setting time BS EN 196-3:2005+1:2008 Soundness BS EN 196-3:2005+1:2008 Fineness - air permeability (Blaine) method BS EN 196-6:2010 Density BS EN 196-6:2010 National nnex PULVERISED FUEL-SH hloride BS EN 196-2:2013 alcium oxide content BS EN 196-2:2013 Sulphuric anhydride BS EN 196-2:2013 Loss on ignition BS EN 196-2:2013 ONRETE - hardened ement and aggregate content BS :2015 hloride content BS EN 14629:2007 BS :2015 and Documented In-House Method based on BS :2015 ssessment Manager: TD Page 5 of 14

6 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ONRETE hardened (cont d) Sulphate content BS :2015 Sodium oxide and potassium oxide lumina and iron oxides hemical analysis and aggregate content BS :2015 BS :2015 and Documented In-House Method 34.1 Documented In-House Method 14.0 Type of cement BS :2015 lause 10.0 ir-void content - by modified point count method B STM 457/457M-16 Petrographic examination STM PG-SR2 using SEM Procedure and terminology for the petrographic examination of hardened concrete Equivalent water/cement ratio by microporosity assessment Depth and degree of carbonation ompressive strength of cubes - including curing BS : 2016 No TP/G8 using optical microscopy with UV illumination and fluorescent dyes No TP/G7/1 using chemical staining, optical microscopy and polarized light BS EN :2012 BS EN :2009 BS EN :2009 ompressive strength of cores BS EN :2009 Density BS EN :2009 ssessment Manager: TD Page 6 of 14

7 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ONRETE hardened (cont d) ggregate grading BS :2015 Thermal coefficient of linear expansion No. TP/F/4, March 2016 ONRETE STRUTURES arbonation BS EN 14630:2006 BRE Information Paper IP 6/81 No. TP/F/10 D Surface hardness by rebound hammer BS EN :2012 D oring BS EN :2009 D Sampling of concrete by dust drilling BS EN 14629:2007 No. TP/F/11 D of reinforcement BS :1988 D Half -cell potential of uncoated reinforcing steel in concrete STM D MORTR for bricklaying, plastering and rendering hemical analysis BS 4551: :2013 Mix proportions No 34.1 ONRETE PVING FLGS Transverse strength BS EN 1339:2003 Water absorption BS EN 1339:2003 brasion Resistance BS EN 1339:2003 nnex G Unpolished slip resistance value BS EN 1339:2003 nnex I PREST ONRETE KERB UNITS brasion Resistance BS EN 1340:2003 nnex G Unpolished slip resistance value BS EN 1340:2003 nnex I ssessment Manager: TD Page 7 of 14

8 Schedule of ccreditation United Kingdom ccreditation Service ccredited to PVED SURFES, FLOORS and FLOOR OVERINGS Slip resistance (pendulum tester) BS EN 1341:2012 BS EN 1342:2012 BS EN 14231:2003,D Slip resistance value and coefficient of friction BS : :2013,D Surface roughness The ssessment of Floor Slip Resistance, The UK Slip Resistance Group Guidelines Issue 5/2016,D PVED SURFES, FLOORS and FLOOR OVERINGS (Terrazzo tiles for internal use) brasion Resistance BS EN :2004 Unpolished slip resistance value BS EN :2004 Water absorption BS EN :2004 Breaking strength and breaking load BS EN :2004 PVED SURFES, FLOORS and FLOOR OVERINGS (Terrazzo tiles for external use) brasion Resistance BS EN :2004 Unpolished slip resistance value BS EN :2004 Water absorption BS EN :2004 Breaking strength and breaking load BS EN :2004 PREST ONRETE PVING BLOKS brasion Resistance BS EN 1338: 2003 nnex G Unpolished slip resistance value BS EN 1338:2003 nnex I GLSS Glass fracture and inclusions : TP-G-31, Oct 2010 using SEM ssessment Manager: TD Page 8 of 14

9 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ROK Description and classification BS 5930:1999 Section 44 BS EN ISO : 2003 Petrographic description ISRM Suggested Methods - Rock haracterization Testing and Monitoring, Ed. E T Brown-1981 Microcrack dye testing of granite TP/G27-01, D RUSHED ROK FILL Petrographic analysis and semi-quantitative analysis of crushed rock : TP-G-30, 2011 using SEM ROOFING SLTES Modulus of rupture STM 120/120M-12 SLTE ND STONE PRODUTS for discontinuous roofing and cladding Petrographic examination (excluding X-ray diffraction) BS EN :2011:clause16 Failure load in bending BS EN :2011:clause 10 Length and width BS EN :2011:clause 5 Edge deviation BS EN :2011:clause 6 Rectangularity BS EN :2011:clause 7 Thickness BS EN :2011:clause 8 Flatness deviation BS EN :2011:clause 9 Freeze thaw resistance BS EN :2011:clause 12 Thermal cycling BS EN :2011:clause 15 Water absorption BS EN :2011:clause 11 Sulfur dioxide exposure (ao3 <= 20%) BS EN :2011:clause 14 ssessment Manager: TD Page 9 of 14

10 Schedule of ccreditation United Kingdom ccreditation Service ccredited to BUILDING STONE ompressive strength STM 170/170M-09 Flexural strength STM 880/880M-09 Modulus of rupture STM 99-/99M-09 Saturation coefficient and porosity bsorption and bulk specific gravity Durability Tests for Building Stone (BRE Report BR141:1989) STM 97/97M-09 brasion resistance STM 241/241M-13 MSONRY UNITS ompressive strength BS EN 772-1:2011 pparent density and open porosity BS EN 772-4:1998 Real density and total porosity BS EN 772-4:1998 Water absorption coefficient by capillarity BS EN :2011 Dimensions BS EN :2011 NTURL STONE (natural stone products for building purposes) Dimensions BS EN 1341:2012 BS EN 1342:2012 BS EN 1343:2012 Petrographic description BS EN 12407:2007 Standard guide for petrographic examination of dimension stone Flexural strength under concentrated load (3 point loading method) Flexural strength under constant moment STM BS EN 12372:2006 BS EN 13161:2008 ompressive strength BS EN 1926:2006 BS EN 1342:2012 Breaking load at dowel hole BS EN 13364:2002 ssessment Manager: TD Page 10 of 14

11 Schedule of ccreditation United Kingdom ccreditation Service ccredited to NTURL STONE (natural stone products for building purposes) (cont d) Standard test method for strength of individual stone anchorages in dimension stone STM 1354/ 1354M-09 brasion resistance BS EN 1341:2012 nnex BS EN 1342:2012 nnex B BS EN 14157:2004 Method (wide wheel) Resistance to salt crystallisation BS EN 12370:1999 Water absorption coefficient by capillarity BS EN 1925:1999 Real density and total porosity BS EN 1936:2006 Water absorption at atmospheric pressure pparent density and open porosity BS EN 13755:2008 BS EN 1341:2012 BS EN 1342:2012 BS EN 1343:2012 BS EN 1936:2006 Frost resistance BS EN 12371: 2010 DIN :1982 Method No. TP/G19/6: March 2005 geing by thermal cycling BS EN 14066:2013 Unpolished slip resistance (pendulum tester) Dynamic modulus of elasticity (by fundamental resonant frequency) BS EN 1341:2012 BS EN 1342:2012 BS EN 14231:2003 BS EN 14146:2004, D Static elastic modulus BS EN 14580:2005 Linear thermal expansion coefficient (Method ) BS EN 14581:2004 ssessment Manager: TD Page 11 of 14

12 Schedule of ccreditation United Kingdom ccreditation Service ccredited to NTURL STONE (natural stone products for building purposes) (cont d) Sensitivity to changes in appearance produced by thermal cycles BS EN 16140:2011 Sound speed propagation BS EN 14579:2004 PINT and IR FILTERS used in air monitoring Lead content No 40.3 using atomic absorption spectrophotometry SLT for spreading on highways for winter maintenance Matter insoluble in water BS 3247:2011+1:2016 hloride content BS 3247:2011+1:2016 Soluble sulphate compounds BS 3247:2011+1:2016 Moisture content BS 3247:2011+1:2016 Grading by sieve analysis BS 3247:2011+1:2016 WTER for making concrete Suitability BS EN 1008:2002 METLS, LLOYS and METL PRODUTS Tensile test up to 1000KN (ambient temperature) BS EN ISO :2016 Method B Tensile test up to 600KN (ambient temperature) BS EN ISO :2016 Method B Vickers hardness BS EN ISO :2018 harpy impact testing up to 300 joules at 77 K and from 233 K to ambient temperature Micrographic determination of the grain size of steel (comparative method only) Micrographic determination of the morphology of graphite in cast iron BS EN ISO 148-1:2016 BS EN ISO 643:2012 BS EN ISO 945-1:2018 ssessment Manager: TD Page 12 of 14

13 Schedule of ccreditation United Kingdom ccreditation Service ccredited to METLS & LLOYS: ferrous and non-ferrous Metallographic examination and identification of materials MS/LG/TP M/13 using acid etching and light microscopy arbon and Low lloy Steels Elemental analysis STP/18 using optical emission spectroscopy, Si, Mn, P, S, r, Mo, Ni, l, o, u, Nb, Ti, V WELDMENTS Tests designated in specified welding codes - as detailed below:- Bend, Fracture, Hardness, Impact, *Tensile, Visual-examination, Macro-examination, Micro-examination *Tensile testing at lapham BS EN ISO :3013 BS EN ISO :2004 BS EN ISO :2017 BS EN ISO :2005 BS EN ISO 9016:2012 BS EN ISO 5178:2011 BS EN ISO 4136:2012 BS EN ISO 5173:2010+1:2011 BS EN ISO :2011 BS EN ISO 9017:2018 BS EN ISO 17639:2013, REINFORING STEELS Tensile strength up to 40 mm diameter BS 4449: BS 4449:1997 (withdrawn), Tensile properties BS 4482:2005 BS 4483:2005 Weld test BS EN ISO :2006 clause 14 BS EN ISO :2006 clause 14, STEEL OUPLERS for use in working scaffolds and falsework Slipping force (R, SW, SF) Failure Force (R, SW) BS EN 74-1:2005 lause BS EN 74-1:2005 lause Pull apart force (R) BS EN 74-1:2005 lause 7.3 Pull apart force (SW) Documented in-house method MS/LG/TP/M/15 FSTENERS - bolts only Tensile strength BS EN ISO 898-1:2013 Proof loading BS EN ISO 898-1:2013 ssessment Manager: TD Page 13 of 14

14 Schedule of ccreditation United Kingdom ccreditation Service ccredited to URTIN WLLING RINSREENS SLOPE GLZING WT Standards for Systemised Building Envelopes and Test Methods for Building Envelopes, December 2005 Water Penetration - Hose Test Section 9 D Water Penetration Spraybar Section 10 D URTIN WLLING Watertightness BS EN 13051:2001 D Field hose test M D END ssessment Manager: TD Page 14 of 14