Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17065:2012 to provide product conformity certification Rossmore Business Park Ellesmere Port South Wirral Cheshire CH65 3EN Contact: Jannine Hunter Tel: +44 (0) Website: Locations where certification activities covered by the above Accreditation Standard are undertaken SGS United Kingdom Ltd Rossmore Business Park Ellesmere Port South Wirral Cheshire CH65 3EN UNITED KINGDOM Unit 202B Worle Parkway Weston-super-Mare- North Somerset BS22 6WA UNITED KINGDOM Lead Office for Product Certification and Notified Body Activity London Road Camberley GU15 3EY UNITED KINGDOM Carnegie Building Studio A Library Hill 121 Donegall Road Belfast BT12 5JL UNITED KINGDOM 3 Bridgend Business Centre Bennett Street Bridgend Industrial Estate Bridgend Mid Glamorgan CF31 3SH UNITED KINGDOM Station Road Oldbury West Midlands B69 4LN UNITED KINGDOM Macklin Avenue Billingham TS23 4BY UNITED KINGDOM SGS, CTS Crossley Hall House, Thornton Road, Bradford BD8 0HH United Kingdom Scope PPE Testing Only Assessment Manager: GM1 Page 1 of 64

2 DETAIL OF ACCREDITATION Product Standard CONSTRUCTION PRODUCTS Flued oil stoves with vaporizing burners BS EN 1:1998/A1:2007 Gully tops and manhole tops for vehicular and pedestrian areas BS EN 124: 1994 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 10: Performance requirements BS EN :2005 Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings BS EN 331:1998/A1:2010 Single burner gas-fired overhead radiant tube heaters for non-domestic use - Part 1: Safety BS EN 416-1:2009 High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 7: Compact laminate and HPL composite panels for internal and external wall and ceiling finishes BS EN 438-7:2005 Radiators and convectors - Part 1: Technical specifications and requirements BS EN 442-1:1995/A1:2003 Concrete roofing tiles and fittings for roof covering and wall cladding - Product specifications BS EN 490:2004/A1:2006 Fibre cement slates and fittings - Product specification and test methods BS EN 492:2012 Fibre-cement profiled sheets and fittings - Product specification and test methods BS EN 494:2012 Assessment Manager: GM1 Page 2 of 64

3 Product Standard Prefabricated accessories for roofing - Installations for roof access - Walkways, treads and steps BS EN 516:2006 Prefabricated accessories for roofing - Roof safety hooks BS EN 517:2006 Gypsum plasterboards - Definitions, requirements and test methods BS EN 520:2004+A1:2009 Steel strip sheaths for prestressing tendons - Terminology, requirements, quality control BS EN 523:2003 Corrugated bitumen sheets - Product specification and test methods BS EN 534: A1:2010 Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods BS EN 544:2011 Glass in building - Basic soda lime silicate glass - Part 9: Evaluation of conformity/product standard BS EN 572-9:2004 Fibre cement pipes for drains and sewers - Part 2: Manholes and inspection chambers BS EN 588-2:2001 Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Requirements and test methods BS EN 598: A1:2009 Non-domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 300 kw, without a fan to assist transportation of combustion air and/or combustion BS EN 621:2009 Elastomeric seals - Materials requirements for pipe joint seals used in water and drainage applications - Part 1: Vulcanized rubber BS EN 681-1:1996/A3:2005 Assessment Manager: GM1 Page 3 of 64

4 Product Standard Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 2: Thermoplastic elastomers BS EN 681-2:2000/A1:2002 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 3: Cellular materials of vulcanized rubber BS EN 681-3:2000/A1:2002 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications - Part 4: Cast polyurethane sealing elements BS EN 681-4:2000/A1:2002 Elastomeric Seals - Materials requirements for seals used in pipes and fittings carrying gas and hydrocarbon fluids BS EN 682:2002 Specification for masonry units - Part 1: Clay masonry units BS EN 771-1:2011 Specification for masonry units - Part 2: Calcium silicate masonry units BS EN 771-2:2011 Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) BS EN 771-3:2011 Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units BS EN 771-4:2011 Specification for masonry units - Part 5: Manufactured stone masonry units BS EN 771-5:2011 Specification for masonry units - Part 6: Natural stone masonry units BS EN 771-6:2011 Assessment Manager: GM1 Page 4 of 64

5 Product Standard Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety (including amendments A1:2001, A2:2001 and A3:2002) BS EN 777-1:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 2: System E - Safety BS EN 777-2:2009 Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety BS EN 777-3:2009 Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety BS EN 777-4:2009 Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kw, without a fan to assist transportation of combustion air and/or combustion BS EN 778:2009 Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets BS EN 845-1: A1:2008 Specification for ancillary components for masonry - Part 2: Lintels BS EN 845-2:2003 Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork BS EN 845-3: A1:2008 Separator systems for light liquids (eg, oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control BS EN 858-1:2002/A1:2004 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance BS EN 877:1999/A1:2006/AC:2008 Assessment Manager: GM1 Page 5 of 64

6 Product Standard Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods BS EN 969:2009 WC pans and WC suites with integral trap BS EN 997:2012 Specification for mortar for masonry - Part 1: Rendering and plastering mortar BS EN 998-1:2010 Specification for mortar for masonry - Part 2: Masonry mortar BS EN 998-2:2010 Light transmitting single skin profiled plastics sheets for internal and external roofs, walls and ceilings requirements and test methods EN1013:2012 Glass in building - Mirrors from silver-coated float glass for internal use - Part 2: Evaluation of conformity; product standard BS EN :2008 Glass in building - Glass blocks and glass pavers - Part 2: Evaluation of conformity/product standard BS EN :2007 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications BS EN 1057:2006+A1:2010 Glass in building - Coated glass - Part 4: Evaluation of conformity/product standard BS EN :2004 Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control BS EN :1999/A1:2004 Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control BS EN :1999/A1:2004 Assessment Manager: GM1 Page 6 of 64

7 Product Glass in building - Insulating glass units - Part 5: Evaluation of conformity Standard BS EN : A2:2010 Clay roofing tiles and fittings - Product definitions and specifications BS EN 1304:2005 Domestic gas-fired forced convection air heaters for space heating, with fan-assisted burners not exceeding a net heat input of 70 kw BS EN 1319:2009 Structural bearings - Part 3: Elastomeric bearings BS EN :2005 Structural bearings - Part 4: Roller bearings BS EN :2004/AC:2007 Structural bearings - Part 5: Pot bearings BS EN :2005 Structural bearings - Part 6: Rocker bearings BS EN :2004 Structural bearings - Part 7: Spherical and cylindrical PTFE bearings BS EN :2004 Structural bearings - Part 8: Guide bearings and restrain bearings BS EN :2007 Concrete paving blocks - Requirements and test methods BS EN 1338:2003 Concrete paving flags - Requirements and test methods BS EN 1339:2003/AC:2006 Concrete kerb units - Requirements and test methods BS EN 1340:2003/AC:2006 Slabs of natural stone for external paving - Requirements and test methods BS EN 1341:2012 Assessment Manager: GM1 Page 7 of 64

8 Product Setts of natural stone for external paving - Requirements and test methods BS EN 1342:2012 Standard Kerbs of natural stone for external paving - Requirements and test methods BS EN 1343:2012 Clay pavers - Requirements and test methods BS EN 1344:2002 Drainage channels for vehicular and pedestrian areas - Classification, design and testing requirements, marking and evaluation of conformity BS EN 1433:2002/A1:2005 Natural stone - Slabs for cladding - Requirements BS EN 1469:2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete BS EN :2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 3: Structural and non-structural repair BS EN :2005 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 4: Structural bonding BS EN :2004 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 5: Concrete injection BS EN :2004 Assessment Manager: GM1 Page 8 of 64

9 Product Standard Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 6: Anchoring of reinforcing steel bar BS EN :2006 Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 7: Reinforcement corrosion protection BS EN :2006 Prefabricated reinforced components of lightweight aggregate concrete with open structure BS EN 1520:2011 Glass in building - Special basic - Borosilicate glasses - Part 1-2: Evaluation of conformity/product standard BS EN :2004 Glass in building - Special basic - Glass ceramics - Part 2-2: Evaluation of conformity/product standard BS EN :2004 Grease separators - Part 1: Principles of design, performance and testing, marking and quality control BS EN :2004/AC:2006 Chimneys - Requirements for metal chimneys - Part 1: System chimney BS EN :2009 Chimneys. Components. Concrete Flue Blocks BS EN 1858:2008+A1:2011 Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/product standard BS EN :2004 Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods BS EN 1873:2005 Assessment Manager: GM1 Page 9 of 64

10 Product Standard Concrete pipes and fittings, unreinforced, steel fibre and reinforced BS EN 1916:2002/AC:2006 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced BS EN 1917:2002/AC:2008 Non-alloy steel tubes and fittings for the conveyance of water and other aqueous liquids - Technical delivery conditions BS EN 10224:2002/A1:2005 Non-Alloy steel tubes suitable for welding and threading - Technical delivery conditions BS EN 10255:2004/A1:2007 Joints for the connection of steel tubes and fittings for the conveyance of water and other aqueous liquids BS EN 10311:2005 Welded stainless steel tubes for the conveyance of water and other aqueous liquids - Technical delivery conditions BS EN 10312:2002/A1:2005 Adhesives for tiles - Requirements, evaluation of conformity, classification and designation BS EN 12004:2007+A1:2012 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 1: Lifting plants for wastewater containing faecal matter BS EN :2001 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 2: Lifting plants for faecal-free wastewater BS EN :2000 Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 3: Lifting plants for wastewater containing faecal matter for limited applications BS EN :2000 Assessment Manager: GM1 Page 10 of 64

11 Product Standard Wastewater lifting plants for buildings and sites - Principles of construction and testing - Part 4: Nonreturn valves for faecal-free wastewater and wastewater containing faecal matter BS EN :2000 Natural stone - Modular tiles - Requirements BS EN 12057:2004 Natural stone - Slabs for floors and stairs - Requirements BS EN 12058:2004 Smoke and Heat Control Systems Smoke Duct Section BS EN :2011 Smoke and Heat Control Systems Smoke Control Dampers BS EN :2011 Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/product standard BS EN :2004 General Purpose Adhesives for Structural Assembly. Requirements and Test BS EN 15274:2007 Workshop fabricated steel tanks - Part 2: Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids BS EN :2005 Slate and stone for discontinuous roofing and cladding - Part 1: Product specification BS EN :2004 Glass in building - Chemically strengthened soda lime silicate glass - Part 2: Evaluation of conformity/product standard BS EN :2004 Assessment Manager: GM1 Page 11 of 64

12 Product Air admittance valves for drainage systems - Requirements, tests methods and evaluation of conformity BS EN 12380:2002 Standard Chimneys. Components. Concrete Outer Wall Elements BS EN 12446:2011 Fibre cement flat sheets - Product specification and test methods BS EN 12467:2012 Small wastewater treatment systems for up to 50 PT - Part 1: Prefabricated septic tanks BS EN :2000/A1:2003 Small wastewater treatment systems for up to 50 PT - Part 3: Packaged and/or site assembled domestic wastewater treatment plants BS EN :2005+A1:2009 Small wastewater systems for up to 50 PT - Part 4: Septic tanks assembled in situ from prefabricated kits BS EN :2007 Aggregates for concrete BS EN 12620:2002+A1:2008 Anti-glare screens for roads - Part 1: Performance and characteristics BS EN :2000/A1:2003 Sanitary appliances - Specification for whirlpool baths BS EN 12764:2004+A1:2008 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kw - Requirements and test methods BS EN 12809:2001/A1:2004/AC:2007 Residential cookers fired by solid fuel - Requirements and test methods BS EN 12815:2001/A1:2004/AC:2007 Precast concrete - Elements for fences BS EN 12839:2001 Assessment Manager: GM1 Page 12 of 64

13 Product Standard Gypsum blocks - Definitions, requirements and test methods BS EN 12859:2011 Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods BS EN 12860:2001 Prefabricated accessories for roofing - Permanently fixed roof ladders - Product specification and test methods BS EN 12951:2004 Glass in building - Thermally toughened borosilicate safety glass - Part 2: Evaluation of conformity/product standard BS EN :2004 Aggregates for bituminous mixtures and surface treatments for roads, airfields and other trafficked areas BS EN 13043:2002/AC:2004 Lightweight aggregates - Part 1: Lightweight aggregates for concrete, mortar and grout BS EN :2002 Lightweight aggregates - Part 2: Lightweight aggregates for bituminous mixtures and surface treatments and for unbound and bound applications BS EN :2004 Chimneys - System chimneys with clay/ceramic flue liners - Part 3: Requirements and test methods for air flue system chimneys BS EN :2007 Steps for underground man entry chambers - Requirements, marking, testing and evaluation of conformity BS EN 13101:2002 Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete BS EN :2006/AC:2008 Assessment Manager: GM1 Page 13 of 64

14 Product Standard Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers BS EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 3: Soft Asphalt BS EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt BS EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt BS EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt BS EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 7: Porous Asphalt BS EN :2006/AC:2008 Aggregates for mortar BS EN 13139:2002 Leak detection systems - Part 1: General principles BS EN :2003 Thermal insulation for buildings - Factory made mineral wool (MW) - Specification BS EN 13162:2012 Thermal insulation for buildings - Factory made of expanded polystyrene (EPS) - Specification BS EN 13163:2012 Thermal insulation for buildings - Factory made of extruded polystyrene foam (XPS) - Specification BS EN 13164:2012 Thermal insulation for buildings - Factory made rigid polyurethane foam (PUR) Specification BS EN 13165:2012 Assessment Manager: GM1 Page 14 of 64

15 Product Standard Thermal insulation for buildings - Factory made of phenolic foam (PF) - Specification BS EN 13166:2012 Thermal insulation for buildings - Factory made cellular glass (CG) - Specification BS EN 13167:2012 Thermal insulation for buildings - Factory made wood wool (WW) - Specification BS EN 13168:2012 Thermal insulation for buildings - Factory made of expanded perlite (EPB) - Specification BS EN 13169:2012 Thermal insulation for buildings - Factory made of expanded cork (ICB) - Specification BS EN 13170:2012 Thermal insulating for buildings - Factory made wood fibre (WF) - Specification BS EN 13171:2012 Inset appliances including open fires fired by solid fuels -Requirements and test methods BS EN 13229:2001/A2:2004/AC:2007 Roomheaters fired by solid fuel - Requirements and test methods BS EN 13240:2001/A2:2004/AC:2007 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics BS EN :2003+A1:2011 Aggregates for unbound and hydraulically bound materials for use in civil engineering work and road construction BS EN 13242:2002+A1:2007 Assessment Manager: GM1 Page 15 of 64

16 Product Standard Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes BS EN :2008/AC:2009 Geotextiles and geotextile-related - Required characteristics for use in the construction of roads and other trafficked areas BS EN 13249:2000/A1:2005 Geotextiles and geotextile-related - Required characteristics for use in the construction of railways BS EN 13250:2000/A1:2005 Geotextiles and geotextile-related - Required characteristics for use in earthworks, foundations and retaining structures BS EN 13251:2000/A1:2005 Geotextiles and geotextile-related - Required characteristics for use in drainage systems BS EN 13252:2000/A1:2005 Geotextiles and geotextile-related - Required characteristics for use in external erosion control systems BS EN 13253:2000/A1:2005 Geotextiles and geotextile-related - Required characteristics for use in the construction of reservoirs and dams BS EN 13254:2000/A1:2005 Geotextiles and geotextile-related - Required characteristics for use in the construction of canals BS EN 13255:2000/A1:2005 Geotextiles and geotextile-related - Characteristics required for use in solid waste disposals BS EN 13257:2000/A1:2005 Gypsum binders and gypsum plasters - Part 1: Definitions and requirements BS EN :2008 Assessment Manager: GM1 Page 16 of 64

17 Product Kitchen sinks - Functional requirements and test methods BS EN 13310:2003 Standard Thermoplastics static tanks for above ground storage of domestic heating oils, kerosene and diesel fuels - Blow moulded polyethylene, rotationally moulded polyethylene and polyamide 6 by anionic polymerization tanks - Requirements and test methods BS EN 13341:2005+A1:2011 Armourstone - Part 1: Specification BS EN :2002 Wall-hung urinals - Functional requirements and test methods BS EN 13407:2006 Aggregates for railway ballast BS EN 13450:2002/AC:2004 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements BS EN :2004 Chimneys - Requirements and test methods for clay/ceramic flue terminals BS EN 13502:2002 External blinds - Performance requirements including safety BS EN 13561:2004+A1:2008 Anti-flooding devices for buildings - Part 1: Requirements BS EN :2002 Overfill prevention devices for static tanks for liquid petroleum fuels BS EN 13616:2004/AC:2006 Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering BS EN :2005 Assessment Manager: GM1 Page 17 of 64

18 Product Standard Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering BS EN :2005 Shutters - Performance requirements including safety BS EN 13659:2004+A1:2008 Flexible sheets for waterproofing - Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics BS EN 13707:2004+A2:2009 Terrazzo tiles - Part 1: Terrazzo tiles for internal use BS EN :2004/AC:2005 Terrazzo tiles - Part 2: Terrazzo tiles for external use BS EN :2004 Screed material and floor screeds - Screed material - Properties and requirements BS EN 13813:2002 Fibrous gypsum plaster casts - Definitions, requirements and test methods BS EN 13815:2006 Curtain walling - Product standard BS EN 13830:2003 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing BS EN :2010 Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 2: Underlays for walls BS EN :2010 Concrete pavements - Part 3: Specifications for dowels to be used in concrete pavements BS EN :2004 Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods BS EN 13915:2007 Assessment Manager: GM1 Page 18 of 64

19 Product Standard Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods BS EN 13950:2005 Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics BS EN 13956:2012 Jointing materials for gypsum plasterboards - Definitions, requirements and test methods BS EN 13963:2005/AC:2006 Suspended ceilings - Requirements and test methods BS EN 13964:2004/A1:2006 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics BS EN 13967:2012 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics BS EN 13969:2004/A1:2006 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics BS EN 13970:2004/A1:2006 Flexible sheets for waterproofing - Plastic and rubber vapour control layers - Definitions and characteristics BS EN 13984:2004/A1:2006 Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking BS EN 13986:2004 Binders for magnesite screeds - Caustic magnesia and magnesium chloride - Part 1: Definitions, requirements BS EN :2004 Assessment Manager: GM1 Page 19 of 64

20 Product Standard Ceiling mounted radiant panels supplied with water at temperature below 120 C - Part 1: Technical specifications and requirements BS EN :2003 Resilient, textile and laminate floor coverings - Essential characteristics BS EN 14041:2004/AC:2006 WC and Urinal Flushing Cisterns BS EN 14055:2010 Thermal insulation - In-situ formed expanded clay lightweight aggregate - Part 1: Specification for the loose-fill before installation BS EN :2004/AC:2006 Thermal insulation for buildings - In-situ formed loose-fill mineral wool (MW) - Part 1: Specification for the loose-fill before installation BS EN :2010 Timber Structures. Strenght Graded Structural Timber With Rectangular Cross Section. General Requirements BS EN :2005+A1:2011 Glass in building - Basic alkaline earth silicate glass - Part 2: Evaluation of conformity/product standard BS EN :2004 Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/product standard BS EN :2005 Joint fillers and sealants - Part 1: Specifications for hot applied sealants BS EN :2004 Joint fillers and sealants - Part 2: Specifications for cold applied sealants BS EN :2004 Assessment Manager: GM1 Page 20 of 64

21 Product Standard Joint fillers and sealants - Part 3: Specifications for preformed joint seals BS EN :2006 Gypsum plasterboard from reprocessing - Definitions, requirements and test methods BS EN 14190:2005 Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods BS EN 14195:2005 Preformed plasterboard cornices - Definitions, requirements and test methods BS EN 14209:2005 Structural Timber. Wood Poles for Overhead Lines BS EN 14229:2010 Gypsum elements for suspended ceilings - Definitions, requirements and test methods BS EN 14246:2006/AC:2007 Sanitary appliances - Communal washing troughs BS EN 14296:2005 Thermal insulation for building equipment and industrial installations - Factory made mineral wool (MW) - Specification Thermal insulation for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) - Specification BS EN 14303:2009 BS EN 14304:2009 Thermal insulation for building equipment and industrial installations - Factory made cellular glass (CG) - Specification BS EN 14305:2009 Thermal insulation for building equipment and industrial installations - Factory made calcium silicate (CS) Specification BS EN 14306:2009 Assessment Manager: GM1 Page 21 of 64

22 Product Standard Thermal insulation for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) - Specification BS EN 14307:2009 Thermal insulation for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) - Specification BS EN 14308:2009 Thermal insulation for building equipment and industrial installations - Factory made of expanded polystyrene (EPS) - Specification BS EN 14309:2009 Thermal insulation for building equipment and industrial installations - Factory made polyethylene foam (PEF) - Specification BS EN 14313:2009 Thermal insulation for building equipment and industrial installations - Factory made phenolic foam (PF) - Specification BS EN 14314:2009 Thermal insulation for buildings - In-situ thermal insulation formed from expanded perlite (EP) - Part 1: Specification for bonded and loose-fill before installation BS EN :2004 Thermal insulation for buildings - In-situ thermal insulation formed from exfoliated vermiculite (EV) - Part 1: Specification for bonded and loose-fill before installation BS EN :2004 Glass in building - Thermally toughened alkaline earth silicate safety glass - Part 2: Evaluation of conformity/product standard BS EN :2005 Wood flooring - Characteristics, evaluation of conformity and marking BS EN 14342:2005/A1:2008 Assessment Manager: GM1 Page 22 of 64

23 Product Standard Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics BS EN :2006+A1:2010 Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods BS EN 14353:2007+A1:2010 Road traffic noise reducing devices - Specifications BS EN 14388:2005 Fixed ladders for manholes BS EN 14396:2004 Ceramic tiles - Definitions, classification, characteristics and marking BS EN 14411:2012 Shower enclosures - Functional requirements and test methods BS EN 14428:2004/AC:2008 Glass in building - Laminated glass and laminated safety glass - Evaluation of conformity/product standard BS EN 14449:2005 Chimneys - System chimneys with plastic flue liners - Requirements and test methods BS EN 14471:2005 Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods BS EN 14496:2005 Self-supporting double skin metal faced insulating panels - Factory made - Specifications BS EN 14509:2006/AC:2008 Baths for domestic purposes BS EN 14516: A1:2010 Shower trays for domestic purposes BS EN 14527: A1:2010 Assessment Manager: GM1 Page 23 of 64

24 Product Standard Bidets - Functional requirements and test methods BS EN 14528:2007 Timber structures - Connectors - Requirements BS EN 14545:2008 Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods BS EN 14566: A1:2009 Timber structures - Dowel-type fasteners - Requirements BS EN 14592:2008 Adhesives for non-pressure thermoplastic piping systems - Specifications BS EN 14680:2006 Sanitary appliances - Wash basins - Functional requirements and test methods BS EN 14688:2006 Stretched ceilings - Requirements and test methods BS EN 14716:2004 Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements BS EN 14782:2006 Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements Residential space heating appliances fired by wood pellets - Requirements and test methods BS EN 14783:2006 BS EN 14785:2006 Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels BS EN 14800:2007 Adhesives for thermoplastic piping systems for fluids under pressure - Specifications BS EN 14814:2007 Assessment Manager: GM1 Page 24 of 64

25 Product Standard Precast concrete - Box culverts BS EN 14844: A1:2008 Building Hardware. Locks and Latches. Electromechanically Operated Locks and Striking Plates. Requirements and Test Methods BS EN 14846:2008 Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity BS EN :2006 BS EN :2006 Surfaces for sports areas - Indoor surfaces for multi-sports use - Specification BS EN 14904:2006 Flexible sheets for waterproofing - Plastic and rubber damp proof courses - Definitions and characteristics BS EN 14909:2006 Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking BS EN 14915:2006/AC:2007 Thermal insulation and light weight fill for civil engineering applications - Factory made of expanded polystyrene (EPS) - Specification BS EN 14933:2007 Thermal insulation of road and railways and embankment filling - Factory made of extruded polystyrene foam (XPS) - Specification Roof coverings - Continuous rooflights of plastics with or without upstands - Classification, requirements and test methods BS EN 14934:2007 BS EN 14963:2006 Rigid underlays for discontinuous roofing - Definitions and characteristics BS EN 14964:2006 Flexible sheets for waterproofing - Bitumen damp proof courses - Definitions and characteristics BS EN 14967:2006 Assessment Manager: GM1 Page 25 of 64

26 Product Precast concrete - Wall elements Standard BS EN 14992:2007+A1:2012 Precast Concrete Products. Bean and Block Floor Systems. Concrete Blocks BS EN :2009+A1:2011 Precast Concrete Products. Bean and Block Floor Systems. Clay Blocks BS EN :2009+A1:2011 Safety gas connection valves for metal hose assemblies used for the connection of domestic appliances using gaseous fuel BS EN 15069:2008 Decorative wallcoverings - Roll and panel form BS EN 15102:2007 Anti-seismic devices BS EN 15129:2009 Slow heat release appliances fired by solid fuel - Requirements and test methods BS EN 15250:2007 Precast Concrete Products. Retaining Wall Elements BS EN 15258:2008 General Purpose Adhesives for Structural Assembly. Requirements and Test BS EN 15274:2007 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement BS EN : A1:2009 Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards BS EN : A1:2009 Agglomerated stone - Modular tiles for flooring (internal and external) BS EN 15285:2008/AC:2008 Assessment Manager: GM1 Page 26 of 64

27 Product Standard Hydraulic Binder for Non-structural Applications. Definition, Specifications and Conformity Criteria BS EN 15368:2008+A1:2010 Precast concrete - Normal weight and lightweight concrete shuttering blocks - Product properties and performance BS EN 15435:2008 Precast concrete - Wood-chip concrete shuttering blocks - Product properties and performance BS EN 15498:2008 Ventilation for Buildings. Fire Dampers BS EN 15650:2010 Sealants for non-structural use in joints in buildings and pedestrian walkways Part 1: sealants for façade elements EN :2012 Sealants for non-structural use in joints in buildings and pedestrian walkways Part 2: sealants for glazing EN :2012 Sealants for non-structural use in joints in buildings and pedestrian walkways Part 3: sealants for sanitary joints EN :2012 Sealants for non-structural use in joints in buildings and pedestrian walkways Part 4: sealants for pedestrian walkways EN :2012 Light weight fill and themal insulation for civil engineering applications (CEA) expanded clay lightweight aggregate (LWA) EN 15732:2012 Polymer modified bituminous thick coatings for waterproofing definitions and requirements EN 15814:2011+A1:2012 Specifications for external renders and internal plasters based on organic binders BS EN 15824:2009 Assessment Manager: GM1 Page 27 of 64

28 Product Standard Thermal insulation for buildings factory made of polyethylene foam (PEF) specification EN 16069:2012 Prefabricated reinforced components of autoclaved aerated concrete BS EN 12602:2008 Baths for domestic purposes BS EN 14516:2006+A1:2010 Shower trays for domestic purposes BS EN 14527:2006+A1:2010 Plastics piping systems - Soil and waste discharge systems within the building structure - Performance characteristics for pipes, fittings and their joints BS EN 15012:2007 Plastics piping systems - Buried and above ground systems for water and other fluids under pressure - Performance characteristics for pipes, fittings and their joints BS EN 15014:2007 Plastics piping systems - Systems for hot and cold water not intended for human consumption - Performance characteristics for pipes, fittings and their joints BS EN 15015:2007 Stainless steel pliable corrugated tubing kits in buildings for gas with an operating pressure up to 0,5 bar BS EN 15266:2007/AC:2008 Industrial valves - Performance characteristics of thermoplastic valves when used as construction BS EN 15389:2008 Thermal insulation for building equipment and industrial installations - Insitu thermal insulation formed from expanded perlite (EP) - Part 1: Specification for bonded and loosefill before installation BS EN :2010 Assessment Manager: GM1 Page 28 of 64

29 Product Standard Thermal insulation for building equipment and industrial installations - Insitu thermal insulation formed from exfoliated vermiculite (EV) - Part 1: Specification for bonded and loosefill before installation BS EN :2010 Multi-firing sauna stoves fired by natural wood logs - Requirements and test methods BS EN 15821:2010 PERSONAL PROTECTIVE EQUIPMENT Falls from height equipment to the essential requirements of Directive 89/686/EEC and EN and pren documents as appropriate Protective clothing to the essential requirements of Directive 89/686/EEC and EN and pren documents as appropriate Respiratory equipment to the essential requirements of Directive 89/686/EEC and EN and pren documents as appropriate Sports (Mountaineering) equipment to the essential requirements of Directive 89/686/EEC and EN and pren documents as appropriate Market Research Services In accordance with the MRQSAB scheme for organisations conducting market research to ISO 20252:2012. Delivery of Public Services Customer Service Excellence Scheme FOOD PACKAGING: Glass manufacture and forming Paper making and conversion Metal forming Rigid Plastics forming Flexible Plastics manufacture Other manufacturing Printing Processes BRC Technical Standard and Protocol for Companies Manufacturing and Supplying Food Packaging Materials for Retailer Branded Food Products (Issue 5) Assessment Manager: GM1 Page 29 of 64

30 Product Standard FOOD PROCESSING: Cat 1 - Raw red meat Cat 2 - Raw poultry Cat 3 - Raw prepared (meat,fish and vegetarian) Cat 4 - Raw fish, and preparations Cat 5 Fruit, vegetables and nuts Cat 6 Prepared fruit, vegetables and nuts Cat 7 Dairy, liquid egg Cat 8 Cooked meat/fish Cat 9 Raw cured and/or fermented meat and fish Cat 10 Ready meals and sandwiches; ready-to-eat desserts Cat 11 Low/high acid in cans/glass Cat 12 Beverages Cat 13 Alcoholic drinks and fermented/brewed Cat 14 - Bakery Cat 15 Dried foods and ingredients Cat 16 Confectionery Cat 17 Breakfast cereals and snacks Cat 18 Oils and fats BRC Global Standard - Food, Issue 7 CONSUMER PRODUCTS MANUFACTURING: PERSONAL CARE & HOUSEHOLD PRODUCTS Product Technology A1 Chemicals and Formulated Products - Coke, Coal and Refined Petroleum Products (limited to retail/wholesale Packing Operations onlyexcludes mining and refining operations) - Chemicals and Chemical Products A2 Fabricated Paper and Paper Mix Products - Stationery Products - Tissue Products - Tableware and Party-ware - Personal Hygiene, Sanitary, & Nappy Products A4 - Rubber & Plastics - Apparel - Baby accessories - Medical dressings A5 Textiles and Textile Mix Products - Medical dressings - Wipes for household and personal care A8 Metals & Metal Mix Products - Metal (excluding machinery) BRC Global Standard Consumer Products Issue 4 Personal Care and Household Assessment Manager: GM1 Page 30 of 64

31 Product Standard CONSUMER PRODUCTS MANUFACTURING: GENERAL MERCHANDISE PRODUCTS Product Technology A1 Chemicals and Formulated Products - Games/toys - Medical devices (non-invasive) A2 Fabricated Paper and Paper Mix Products -Printing and Recorded media A3 Wood Straw Cork & Bamboo Products - Wood - Wooden - Cork - Straw/Bamboo A4 - Rubber & Plastics - Household utensils/ - Baby /pet - Apparel/Workwear/Footwear - Furniture - Games/Toys - Medical Devices (non-invasive) A5 Textiles and Textile Mix Products - Textiles & Textile Products - Leather/Leather - Workwear/Footwear - Games/Toys A6 Electrical, Electronics and Batteries - Printed & Electronic media - Computer, Electronic, and Communication - Electrical Equipment - Games/Toys A7 Glass, Ceramics, Gemstones/Non-metallic minerals - Glass, Clay, Ceramic and Porcelain Products - Concrete, cement, lime, plaster, & aggregates (limited to operations including packing for retail and wholesale, but excluding mining processes) -Concrete, plaster A8 Metals & Metal Mix Products -Metal Products excluding machinery -Machinery and Equipment A9 Assembly Operations for assembly of from component parts manufactured elsewhere : - Transport Equipment, Cycles, & Boats (excludes all motor vehicles except toys). - Furniture BRC Global Standard Consumer Products Issue 4 General Merchandise Assessment Manager: GM1 Page 31 of 64

32 Product Storage and Distribution & Transport Services for : FOOD - Packaged Food for Retail sale (including Pet food) - Chilled and Frozen Food - Ambient Food - Bulk Storage and transportation (by road only) for food /ingredients - e.g. flour, oils, sugar syrups, wine - Loose food limited to : - open boxed fruit & vegetables - trays of rawfish/crustaceans/seafood - carcasses of meat (unwrapped) Standard BRC Global Standard - Storage and Distribution Issue 3 Storage and Distribution including - Wholesale Module - Contracted Services Module (for pre-packaged only) PACKAGING AND PACKAGING MATERIALS: - Pre-packed and bulk packaging materials for conversion, for packing food and non-food use AGENTS AND BROKERS Food Products Food Category Group 1 Chilled and Frozen Food Group 2 Ambient Food. BRC Global Standard for Agents and Brokers Issue 2. END Assessment Manager: GM1 Page 32 of 64

33 Directive / Regulation Conformity Assessment procedure/ Module/article Category of or individual Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 Annex V- Production Control System 2+ 95/467/EC Chimneys, flues and specific (1/1) EN 12446:2011 EN :2005+A1:2007 EN :2005+A1:2007 EN :2007 EN 13069:2005 EN :2005 EN :2005/AC:2006 EN :2012 EN 1319:2009 EN 14471:2005 EN 1457:1999/A1:2002 EN 1457:1999/A1:2002/AC:2007 EN 1457:1999/AC:2006 EN :2007 EN :2007 EN 1806:2006 EN :2009 EN :2009 EN 1857:2010 EN 1858:2008+A1:2011 EN 416-1:2009 EN 621:2009 EN 777-1:2009 EN 777-2:2009 EN 777-3:2009 EN 777-4:2009 EN 778:2009 System 1, 95/467/EC Gypsum (1/4) EN 13815:2006 Assessment Manager: GM1 Page 33 of 64

34 Directive / Regulation Conformity Assessment procedure/ Module/article Category of or individual Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 System 1 95/467/EC Structural bearings (1/1) EN :2005 EN :2004 EN :2004/AC:2007 EN :2005 EN :2004 EN :2004 EN :2007 EN 15129:2009 System 1 96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression (1/1) EN 54-2:1997 EN 54-2:1997/A1:2006 EN 54-2:1997/AC:1999 EN 54-3:2001/A1:2002 EN 54-3:2001/A2:2006EN 54-4:1997 EN 54-4:1997/A1:2002 EN 54-4:1997/A2:2006 EN 54-4:1997/AC:1999 EN 54-5:2000/A1:2002 EN 54-7:2000/A1:2002 EN 54-7:2000/A2:2006 EN 54-10:2002 EN 54-10:2002/A1:2005 EN 54-11:2001 EN 54-11:2001/A1:2005 EN 54-12:2002 EN 54-16:2008 EN 54-17:2005 EN 54-17:2005/AC:2007 EN 54-18:2005 EN 54-18:2005/AC:2007 EN 54-20:2006 EN 54-20:2006/AC:2008 EN 54-21:2006 EN 54-23:2010 Assessment Manager: GM1 Page 34 of 64

35 Directive / Regulation Conformity Assessment procedure/ Module/article Category of or individual Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 System 1 96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression (1/1) EN 54-24:2008 EN 54-25:2008 EN 54-25:2008/AC:2010 EN 54-25:2008/AC:2012 EN 671-1:2012 EN 671-2:2012 EN :2003 EN :2003 EN :2003 EN :2006 EN :2004 EN :2006 EN :2000 EN :2000/A1:2005 EN :2006 EN :2003 EN :2003 EN :2003 EN :2003 EN :2001 EN :2001/AC:2002 EN :2005 EN :2005/A1:2006 EN :2003 EN :2002 EN :2002/AC:2005 EN :2005 EN :2005/AC:2006 EN :2011 EN :2011 EN :2005 EN :2005/AC:2007 EN : A1:2001 EN :1999+A1:01/A2:04 EN :1999+A1:01/A3:06 EN :1999/A1:2001 Assessment Manager: GM1 Page 35 of 64

36 Directive / Regulation Conformity Assessment procedure/ Module/article Category of or individual Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 System 1 96/577/EC Fire alarm/detection, fixed fire-fighting, fire and smoke control and explosion suppression (1/1) EN :1999/A2:2005 EN :1999/AC:2002 EN :2000/A1:2001 EN :2000/A2:2005 EN :2000/A1:2001 EN :2002 EN 14339:2005 EN 14384:2005 EN 14604:2005 EN 14604:2005/AC:2008 EN 15650:2010 System 1 96/579/EC Circulation fixtures (1/2) Vehicle restraint systems: EN :2007+A2:2012/AC:2012 System 1 96/579/EC Circulation fixtures (1/2) Road traffic signs and traffic control devices EN 12352:2006 EN :2007 EN :2007 EN :2007 System 1 96/579/EC Circulation fixtures (1/2) Road marking EN :2009 System 1 96/579/EC Circulation fixtures (1/2) Road lighting columns (for circulation areas) EN 40-4:2005 EN 40-4:2005/AC:2006 EN 40-5:2002 EN 40-6:2002 EN 40-7:2002 Assessment Manager: GM1 Page 36 of 64

37 Directive / Regulation Conformity Assessment procedure/ Module/article Category of or individual Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 System 1 96/579/EC Circulation fixtures (1/2) EN 12368:2006 EN :2005+A1:2009 System 1 96/579/EC Circulation fixtures (1/2) EN 1423:2012 EN :2009 System 1 96/580/EC Curtain wallings (1/1) EN 13830:2003 Annex V- Production Control System 2+ 96/581/EC Geotextiles (1/2) EN 13249:2000 EN 13249:2000/A1:2005 EN 13250:2000 EN 13250:2000/A1:2005 EN 13251:2000 EN 13251:2000/A1:2005 EN 13252:2000 EN 13252:2000/A1:2005 EN 13253:2000 EN 13253:2000/A1:2005 EN 13254:2000 EN 13254:2000/A1:2005 EN 13254:2000/AC:2003 EN 13255:2000 EN 13255:2000/A1:2005 EN 13255:2000/AC:2003 EN 13256:2000 EN 13256:2000/A1:2005 EN 13256:2000/AC:2003 EN 13257:2000 EN 13257:2000/A1:2005 EN 13257:2000/AC:2003 Assessment Manager: GM1 Page 37 of 64

38 Directive / Regulation Conformity Assessment procedure/ Module/article Category of or individual Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 Annex V- Production Control System 2+ 96/581/EC Geotextiles (1/2) EN 13265:2000 EN 13265:2000/A1:2005 EN 13265:2000/AC:2003 EN 13361:2004 EN 13361:2004/A1:2006 EN 13362:2005 EN 13491:2004 EN 13491:2004/A1:2006 EN 13492:2004 EN 13492:2004/A1:2006 EN 13493:2005 EN 15381:2008 EN 15382:2008 Annex V- Production Control System 2+ 97/176/EC Structural timber (1/3) EN :2005+A1:2011 EN 14229:2010 EN 14250:2010 EN 14250:2010 EN 14374:2004 EN 14592:2008+A1:2012 System 1 97/176/EC Structural timber (2/3) : EN 14080:2005 EN 14374:2004 System 1 97/462/EC Wood-based panels (1/2) EN 13986:2004 Annex V- Production Control System 2+ 97/462/EC Wood-based panels (1/2) EN 13986:2004 Assessment Manager: GM1 Page 38 of 64

39 Directive / Regulation Conformity Assessment procedure/ Module/article Category of or individual Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 System 1 97/462/EC Wood-based panels (2/2) EN 13986:2004 Annex V- Production Control System 2+ 97/555/EC Cements, building limes and other hydraulic binders : EN 459-1:2010 EN 15368:2008+A1:2010 Annex V- Production Control System 2+ 97/740/EC Masonry and related (1/3) EN 771-1:2011 EN 771-2:2011 EN 771-3:2011 EN 771-4:2011 EN 771-5:2011 EN 771-6:2011 EN 998-2:2010 System 1 97/740/EC Masonry and related (3/3) EN 15824:2009 System 1 97/808/EC Floorings (2/2) : Resilient and textile floorings EN 14041:2004 EN 14041:2004/AC:2006 EN 14904:2006 System 1 97/808/EC Floorings (2/2) : Floor screed materials (for internal uses) EN :2004 EN 13813:2002 Assessment Manager: GM1 Page 39 of 64

40 Directive / Regulation Conformity Assessment procedure/ Module/article Category of or individual Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 System 1 97/808/EC Floorings (2/2) : Rigid flooring EN 14342:2005+A1:2008 EN 15285:2008 EN 15285:2008/AC:2008 Annex V- Production Control System 2+ 98/214/EC Structural metallic and ancillaries (1/4) EN :2004 EN :2009 EN :2009 EN :2006 EN :2006 EN 10340:2007 EN 10340:2007/AC:2008 EN 10343:2009 EN :2007 EN 15088:2005 Annex V- Production Control System 2+ 98/214/EC Structural metallic and ancillaries (2/4) EN :2009 EN :2009+A1:2011 EN :2009/AC:2010 Annex V- Production Control System 2+ 98/214/EC Structural metallic and ancillaries (3/4) EN 13479:2004 Annex V- Production Control System 2+ 98/214/EC Structural metallic and ancillaries (4/4) EN :2005 Assessment Manager: GM1 Page 40 of 64

41 Directive / Regulation Conformity Assessment procedure/ Module/article Category of or individual Essential requirements: Product specification / Properties/Standards The Construction Products Regulation (EU) No 305/2011 System 1 98/436/EC Roof coverings, rooflights, roof windows and ancillary (2/6) EN 534:2006+A1:2010 EN 490:2004/A1:2006 EN 492:2012 EN 494:2012 EN 1013:2012 EN 1873:2005 EN :2006+A1:2010 EN 14509:2006 EN 14509:2006/AC:2008 EN 14963:2006 EN 14964:2006 System 1 98/437/EC Internal and external wall and ceiling finishes (3/5) EN 438-7:2005 EN 534:2006+A1:2010 EN 12467:2012 EN :2008 EN :2008/AC:2009 EN 13964:2004 EN 13964:2004/A1:2006 EN 14411:2012 EN 14716:2004 EN 14915:2006 EN 14915:2006/AC:2007 EN 15102:2007+A1:2011 Annex V- Production Control System 2+ 98/437/EC Internal and external wall and ceiling finishes EN 14411:2012 Assessment Manager: GM1 Page 41 of 64