Food Service Consultant's Guide To Serving "Bottled Water Quality"

Transcription

1 Food Service Consultant's Guide To Serving "Bottled ater Quality" f iltrine water "Better than bottled" ithout The Bottles USA LABOR Made in USA USA PARTS FSC-09a

2 igh-capacity "Filling Stations" Eliminate Throw-Away Bottles in Food Service Areas The Problem Most people don t drink "tap water" anymore. As a result, dining areas are cluttered with throw-away water bottles. Everywhere you look valuable space is being used to store and dispose of water bottles. It's a LEE nightmare. The Sustainable Alternative Specify "Filling Stations" to fill cups, glasses, pitchers, personal containers and carafes with filtrine water. In other words, serve "bottled water quality" without the bottles. ere's ow it orks 1 INSTALL cup "Filling Stations" in convenient locations throughout the dining area. 2 SELECT In-all Chiller/Purifier (page 8) sized to serve one quart per day per person. 3 CONNECT Chiller/Purifier to "Filling Stations" by running flexible, insulated tubing loop in the plenum above ceiling. Include coffee makers, ice makers and food service outlets in the loop. "Filling Station" Model B103 Shown in stainless and gloss black. Perfect for filling a carafe, cup, glass or personal water container. FITS IN 4" ALL ill You Earn LEE Credits? You be the judge. Energy required to manufacture, transport, chill, store and dispose of throw-away plastic water bottles is eliminated. Over 100 billion plastic water bottles are dumped in landfills each year. Refilling personal containers will conserve materials and resources. Storage space for water bottles is a waste of materials and resources. ater bottles are open containers, part water, part "secondhand" air. Eliminate open bottles to reduce the spread of contamination. "Filling Stations" & Chiller/ Purifiers carry a Lifetime arranty. They are the sustainable alternative to throwaway plastic water bottles. N O -T R O Z O N E IG-CAPACITY "Filling Stations" FOR FOO SERVICE AREAS "Filling Station" Model B103-C4 shown in stainless steel - custom color finishes available ONLY 4" EEP 4 ISPENSERS - 50 CUPS EAC Biodegradable cups dispensed here. FILLER AT AA EIGT Fills cups, glasses, pitchers, personal containers and carafes. RAIN OPTIONAL ater tight cup bin below makes drain connection optional. CUP ISPOSAL OOR Self-closing for disposing of used cups. INGE FRONT PANEL 16 gauge, one piece stainless steel with full length hinge and concealed catch to provide tamperproof access for refilling cups and removing of waste cup bin. FINIS Satin or mirror stainless steel or color to suit on front panel. "Filling Station" Models MOEL CUP CAP. ALL OPENING (all 4" deep) B103-C /2" x 61" B103-C /2" x 61" B103-C /2" x 61" 2 FILTRINE Mfg Co 15 Kit St. Keene, N USA drinkingwater@filtrine.com

3 "Filling Station " Options... the Finishing Touch Filtrine's line of water-dispensing fixtures provide flexibility so you can design your own "Filling Stations" Model CC-165 FILLER with lever handle (bulkhead mount) Model CC-161 FILLER with push button valve Model CC-161-A GOOSENECK FILLER with lever handle Model CC-151 PUS BACK FILLER (pedestal mount) Model CC-150 PUS BACK FILLER (bulkhead mount) NE... Model RB-1 REFILLABLE BOTTLE holds 32 oz of filtrine water. Get one for every employee and eliminate throw-away bottle disposal. Model CC-159 SELF-CLOSING FILLER Model F-502 ATER BUBBLER... use with STV remote push button valve STV remote push button valve Model CC-121 TERMAL CARAFE Model F-501 ATER BUBBLER with push button valve COUNTER TOP "Filling Station" Model AC-9 COUNTER TOP "Filling Station" Model BL with gooseneck container filler* A 10" LEGEN A Self-Rimming Bowl B Concealed Bowl Clamp C Goose Neck Filler* 8-1/4" 1-1/4" O.. Tailpiece E ater In - 3/8" MPT * Push-Back Filler Avail. C 7-3/4 IA. (min) COUNTER TOP OPENING E B 12 COUNTER TOP "Filling Station" Model AC-11 with pushback container filler* LEFT EN VIE B A TOP VIE 10 C LEGEN A Self-Rimming Tray B Push-Back Filler* C 1-1/4" O.. Tailpiece ater In - 3/8" MPT * Gooseneck Filler Avail. COUNTER TOP OPENING 17-1/4 x 13-1/2 Simple to install in breakrooms, foods service areas, etc. rinking bubbler available 14-1/4 *pushback container filler available 18-1/4 * Also available with gooseneck glass filler COUNTER TOP OPENING 6" x 9-1/2" FILTRINE Mfg Co 15 Kit St. Keene, N USA drinkingwater@filtrine.com 3

4 Self-Contained "Filling Station" Chillers FEATURES Oversized Storage Satisfies Mealtime Peak emands At least 50% of hourly recovery is held in storage, providing extra gallons of cold water from lower electric consumption... reducing operating costs and extending chiller life. Multiple Service Coolers Fixtures may be installed on front, back, and both ends. Large reserve permits simultaneous withdrawal from as many as six outlets on a single cooler. Large Selection of Cooler Capacities, Fixtures and Accessories Serve a thirsty dining crowd with bubblers, pitchers or glass fillers. Specify side shelves or tray slides to suit. Get Creative with Finishes Opt for the standard stainless steel finish or specify your choice of colors on steel, Formica (hundreds of colors and patterns available), natural bronze metal or just about any other material you might require to compliment your food service decor. In-Counter rop In Chillers A compact, self-contained package which drops into place to provide chilled water from any counter top location. Oversized condenser prevents over-heating. Quick Installation 1 Cut opening into counter top 2 rop in chiller, hook up supply and drain 3 Provide grille for access and ventilation 4 Plug-in the electrical cord TYPICAL ROP-IN COOLER MOEL NUMBER PERSONS SERVE * TOP FIXTURE "Filling Station" CILLERS STORAGE GAL CAPACITY GAL ** COMP P TYPICAL OUBLE TOP FIXTURE IMENSIONS - INCES T LBS B/BS-4A / B/BS-6A / B/BS-14A / B/BS-25A / FRONT FIXTURE "Filling Station" CILLERS M/MS-6A / M/MS-14A / M/MS-25A / M/MS-40A / ROP-IN "Filling Station" CILLERS M-4-IA /3 12-1/4 15-1/4 29-1/2 185 NOTE: All "Filling Stations" have 1/2" water supply - 3/4" drain -115/60/1 electrical NOTE: ater-cooled models are available - Use suffix "" in place of "A" * Based on (1) 8 oz glass per person ** Per 80 to 50 O F (26.6 to 10 O C) Single Top Fixture Schematics ouble Top Fixture Schematics Front Fixture Schematics 4" 2" 1/2"MPT RAIN 3/4"MPT 4" 2" 1/2"MPT RAIN 3/4"MPT 4" 2" 32" 28 1/2" 8" 21" 1/2" MPT RAIN 3/4" MPT 21" 21" SIE VIE REAR VIE SIE VIE REAR VIE SIE VIE REAR VIE 4 FILTRINE Mfg Co 15 Kit St. Keene, N USA drinkingwater@filtrine.com

5 "Filling Stations"... rawings & Specs B103-C4 "Filling Station" with (4) 50 Cup ispensers and isposal... Fits in 4" all CONCEALE MOUNTING BRACKET (each side) FRONT VIE w/coverplate 62" 1/4 FPT SIE VIE LEFT EN 1/4 FPT TOP VIE CUTOUT FOR ATER CONN. B103 "Filling Station" Only... Fits in 4" all 1/4 FPT PLUMBING OOKUP CUT-OUT FRONT VIE TOP VIE 24 EN VIE INGE COVERPLATE PAPER CUP ISPENSERS 100 cup cap ea (2-1/4 to 2-7/8 rim dia) 1/4 FPT BACK VIE CUTOUT FOR ATER CONN. 16 FILLER FOR CUPS, GLASSES, PITCERS PERSONAL ATER CONTAINERS AN CARAFES INGE OOR FOR CUP ISPOSAL (SINGS IN) 18-1/2" 37-1/4" 20" 3-1/2" CUTOUT FOR RAIN OOKUP ON BOT SIES USE OPTIONAL RAIN 1-1/4 USE OPTIONAL (slip-fit elbow furnished loose) INGE OOR SINGS IN RECESSE SECTION OF FILLING STATION MOUNTING BRACKET 1-1/2" NOTE: In order to meet AA requirements, Filtrine recommends mounting unit with bottom flange no more than 4 above floorline. RAINGS NOT TO SCALE CONCEALE MOUNTING BRACKET COVER PLATE ALL SURFACE MOUNTING SCRES 12-1/2 1-1/4 O.. RAIN B103 ALL OPENING: 11-1/2" x 4" x 23" ESCRIPTION - "Filling Station": Cup/personal container/carafe filler. Removable cover plate to be one piece construction 16 gauge (stainless steel) or (bronze), without seams, exposed edges or screws, and with outside corners square. Lever action filler made of stainless steel with flow rate of 1/2 gpm. Inlet 1/4" on top. rain 1-1/4" O.. (left or right). "Filling Station" to be Model B103 as manufactured by Filtrine Mfg Co, Keene, N USA and shall include Lifetime arrant and USA parts and labor. OPTIONAL FINISES ON COVER PLATE #4 satin color to suit rop-in "Filling Station" & Chiller Easy counter top installation 1/2 4 "Filling Station" MOELS MOEL CUP IMENSIONS - inches ALL OPENING - inches CAP. B103-C / / B103-C / / B103-C / / RAIN 1-1/4 O.. ESCRIPTION - "Filling Station": Combination filler, cup dispenser and cup disposal system. Cover plate to be one piece construction 16 gauge (stainless steel) (bronze) with full length concealed hinge and latch to provide access to cup dispenser and disposal bin, without seams, exposed edges or screws and interior to be 18 gauge (stainless steel) (bronze). Concealed stainless steel cup dispensers shall have capacity of (50) biodegradable cups each. Lever action filler made of stainless steel with flow rate of 1/2 gpm. Inlet 1/4" on top. rain 1-1/4" left or right (use optional). Removable, concealed, watertight stainless steel waste cup disposal bin. "Filling Station" to be Model ( ) as manufactured by Filtrine Mfg Co, Keene, N USA and shall include Lifetime arranty and USA parts and labor. OPTIONAL FINISES ON COVER PLATE #4 satin color to suit NOTE: Leave REAR open for air intake and exhaust /4 14-1/4 Counter top OPENING: 17-1/4" x 13-1/2" FILTRINE Mfg Co 15 Kit St. Keene, N USA drinkingwater@filtrine.com 5

6 TasteMaster Purifiers... the eart of filtrine water Systems For over a century, TasteMaster Purifiers have been famous for producing spring-like, tastefree drinking water. Now, this technology has been enhanced by incorporating carbon block elements with a micron rating of 0.5 insuring removal of water-borne pathogens as well. oused in a LifeTime stainless steel shell, the TasteMaster Purification utilizes a single, easy-to-change 95% biodegradable element with unique "ual Seal" design to prevent shrinkage and bypass. All the benefits of filtrine water are available at any potable water outlet by the simple addition of a TasteMaster Purifier on the make-up line, providing a lowcost alternative to bottled water. TASTEMASTER... the only purifier with a LIFETIME ARRANTY Elements Meet NSF/ANSI Standards 42 and 53 for Removal of... Organic tastes and odors Chlorine taste and odor Sediment particles down to 0.5 microns Pathogens including Cryptosporidium, Entamoeba Giardia and Toxoplasma Lead reduction (specify "L" model element) "ual Seal" Eliminates Shrinkage and Bypass... Conventional cartridge-type filters depend upon compression of the cartridge top and bottom to effect a seal. owever, tests indicate that the average cartridge loses some rigidity when wet, making it impossible to maintain this original seal. TasteMaster elements employ no compression. Instead, using an innovative ual Seal design whereby the element slides over a center standpipe, they are sealed top and bottom by internal O- rings to insure first-day effectiveness for the life of the element. LIFETIME ARRANTY FEATURES Stainless steel housing with FA grade cast polypropylene manifold and liner ual Seal element design orking pressure to 125 psi ater line temperature to 125 O F TasteMaster Elements Are 95% Biodegradable... the LEE Alternative to Throw-Away Bottles Standard filter elements are made of polypropylene, which is not biodegradable. The activated carbon in the TasteMaster element will biodegrade 95% upon disposal. Element replacement requires no tools and the job is done in about a minute! LIFETIME ARRANT Y Should your TasteMaster Purifier fail at any time, for any reason, it will be repaired or replaced at no charge... FOB factory, Keene, N. 6 FILTRINE Mfg Co 15 Kit St. Keene, N USA drinkingwater@filtrine.com

7 TYPICAL IN-ALL CILLER/PURIFIER/ CIRCULATOR IT GRILLE IN PLACE (COLOR TO SUIT) Chiller/Purifier FEATURES Grille in choice of finishes: stainless steel, bronze or color to suit One unit serves up to 400 persons Compact... as little as 10" depth required Quiet... engineered for indoor environment Energy-saving design for low operating cost inged core grille for easy access. No screws or tools Easy to locate and install at any point within the circulating loop Sustainable design backed by Lifetime arranty In-all Chiller/Purifiers... filtrine water on Tap for Just Pennies a ay Plenum Piping Provides Flexibility and Economy A Chiller/Purifier is concealed in-wall or in-counter and connected to an insulated, flexible copper piping loop located in the plenum above hung ceiling - just like an air conditioning duct - and drops down as required to feed a random layout of outlets in the kitchen, back bar and dining area. Chilled, purified drinking water is supplied for all potable water requirements including "Filling Stations", bubblers, personal container fillers, carafe fillers, coffee machines, ice makers... wherever pure water is desired. Ideal for Retrofitting New plenum piping design is readily adaptable to any interior retrofit. Because it runs horizontally using flexible piping above all walls, partitions and wet columns - installation is quick and costs are lowered also. ow oes It Compare with Bottled ater Costs? ith bottled water now running over $10 per gallon, when you buy the 8 oz. size, a Chiller/Purifier pays for itself in the first year in savings in bottled water costs alone. Banish Throw-Away Bottles from Food Service Areas Create a No-Throw Zone Use "Filling Stations" - drinking fountains of the future - to refill pitchers, glasses, personal water containers, biodegradable cups or carafes. N O -T R O Save valuable floor space... eliminate bottle storage and dispensers. Earn LEE TM credits by specifying a truly sustainable, energy-saving water delivery system. Z O N E TYPICAL IN-ALL CILLER/PURIFIER/ CIRCULATOR IT GRILLE REMOVE FILTRINE Mfg Co 15 Kit St. Keene, N USA drinkingwater@filtrine.com 7

8 ow To Specify Your In-all or In-Counter Chiller/Purifier Two considerations for selecting the correct ES-I unit: 1) Persons to be served 2) Total length of piping loop: distance from Chiller/Purifier to furthest outlet and return REAY-TO-ISSUE SPECIFICATION In order to provide 50 O F purified drinking water to potable water outlets as shown on plan, contractor shall furnish In- all Chiller/Purifier Unit To Include: ermetic compressor 115/60/1 with condenser, thermostat, expansion valve, sight glass and dehydrator. Cooling tank #304 stainless steel (insulated with closed cell thermoelastomer) with stainless steel immersion coil evaporator shall have storage reserve to meet peak demand. Purifier to remove sediment particles, chemicals such as chlorine, organic tastes and odors, cysts such as Cryptosporidium, Giardia, Entamoeba and Toxoplasma. Stainless steel pump to circulate 50 O F water to all outlets. All contained in an in-wall cabinet with key-latched grille for ventilation and service access. Grille shall be (satin stainless steel), (satin bronze), (steel finished in color selected by architect). No hinge or screws shall be visible on front of the mounted unit. Chiller/Purifier shall be Model ES ( )-I as manufactured by Filtrine Mfg Co, Keene, N USA and shall include Lifetime arranty and USA parts and labor. ES IN-ALL UNIT SCEMATIC ES IN-ALL SELECTION CART PIPING ENCLOSURE ATER GRILLE FILTRINE PERSONS ALLOANCE - CIRC COOLING COMP MOEL No. SERVE TOTAL LOOP PUMP TANK MOTOR SUPPLY TASTEMASTER IMENSIONS CONN IMENSIONS * hp gal hp POER PURIFIER inches inches inches *** ft ips IN OUT 2 2 ES-4-RF-I** 100 NA NA NA 4 1/4 115/60/1 FLA 5 TMP ES-4-RFC-I /2 1/10 4 1/4 115/60/1 FLA 5 TMP /8 FPT 3/8 FPT ES-10-RFC-I /2 1/ /2 115/60/1 FLA 10 TMP / * Assume 6 oz per person per seating in typical usage (some drink other beverages). Capacities based on supplying 50 F (10 C) to drinking water fixtures such as bubblers or glass fillers having a maximum of 0.5 gpm flow rate each. ES-RFC models include storage reserve for peak demand and extra capacity to handle heat loss of insulated piping in the circulating loop up to the length shown. hen piping runs exceed allowance shown, reduce population served by 25 people per 50 feet of additional piping. ** Non-recirculating Chiller/Purifier for installation under single dispenser. *** If lead removal is required, add suffix -L to purifier designation (example: TMP2-L-07). SLOTTE KEY-LATC INGE CORE GRILLE (finish as selected by architect) In-all Purifier Only when chilled water isn't required Use with any water dispenser such as water cooler, coffee machine, etc. ATER OUT FRONT ATER IN SUT OFF VALVES TMP-07 PURIFIER SLOT KEY LOCK INGE ACCESS PANEL LEFT EN 2 TYPICAL IN-ALL CABINET Shown in stainless steel, custom colors available. Access panel has concealed hinge and key lock 1-1/2 2 ALL OPENING Model No. IT EPT EIGT ES-4-RF-I 31" 10-1/2" 29" ES-4-RFC-I 31" 10-1/2" 29" ES-10-RFC-I 31" 15" 31" IN-ALL PURIFIER SELECTION CART MOEL No. FLO IMENSIONS - inches gpm TMP1-O7-I /2 3-1/2 18 TMP2-O7-I /2 3-1/2 36 TMP3-O7-I /2 4-1/2 48 TMP3-O7-I-UP /2 48 TMP3-O7-I-TRIP /2 48 TMP3-O7-I-QUA / FILTRINE Mfg Co 15 Kit St. Keene, N USA drinkingwater@filtrine.com