Installation & Servicing Instructions. To be left with the user MELODY BBU. Fire Front GC No

Size: px
Start display at page:

Download "Installation & Servicing Instructions. To be left with the user MELODY BBU. Fire Front GC No"

Transcription

1 221102B Installation & Servicing Instructions To be left with the user MELODY BBU Fire Front GC No For use with a specially designed Glow-worm Back Boiler Unit only 5098 References in these instructions to British Standards and Statutory Regulations/Requirements apply only to the United Kingdom. For Ireland the rules in force must be used. This is a Cat I 2H Appliance BS 6332 BS 5258 One Contact Local Service Customer Services: Tel: (01773) Fax: (01773) Hepworth Heating Ltd., Nottingham Road, Belper, Derbyshire. DE56 1JT General/Sales enquiries: Tel: (01773) Fax: (01773)

2 1 General 690 FIRE FRONT FIXING WALL FACE DIMENSIONS ARE IN mm 23 PREPARED BASE OVERALL DIMENSIONS Diagram 1.1 If this fire front is to be fitted to a Glow-worm Back Boiler WITHOUT a combustion products discharge safety device refer to the Supplementary Instructions at the back of this booklet. 1 General The instructions consist of three parts, Installation and Servicing Instructions for the Fire Front and Back Boiler Unit and Instructions for use, which includes the Guarantee Registration Card. The instructions are an integral part of the appliance and must, to comply with the current issue of the Gas Safety (Installation and Use) Regulations, be handed to the user on completion of the installation. General Notes and Information The Glow-worm Melody BBU gas fire front is to be used with a specially designed Glow-worm Back Boiler Unit only. This fire front and back boiler are NOT suitable for fitting to a precast flue. The fire front is delivered in one cardboard carton, which contains all the parts necessary for the installation of the fire front. If the fire front and back boiler are to be installed at the same time please read both sets of instructions before starting. Wherever possible, all materials, appliances and components to be used shall comply with the requirements of applicable British Standards. Where no British Standards exists, materials and equipment should be fit for their purpose and of suitable quality and workmanship. 1.1 Important Notice The fire is fitted with a safety device which will shut it down if there is a lack of oxygen. If the fire shuts down frequently for no apparent reason the first things to be checked are the chimney and air inlets into the room. An additional cause could be that the filter, in the gas tap has become blocked. Any problems found must be put right, by a competent person, before the fire is used again. This fire front is for use only on G20 gas. Sheet Metal Parts Warning. When installing or servicing this fire front care should be taken when handling sheet metal parts (components), to avoid any possibility of personal injury. 1.2 Data Gas connection Weight from back boiler gas service cock 23kg (50lb) Injectors Upper Bray 19/130 Lower Bray 22/240 Pressure Hot 15mbar (6in wg) Cold 14.6mbar (5.9in wg) Heat input gross 5.28kW (18,000Btu/h) Data label Left hand side of heat exchanger B 2

3 1 General 1.3 Statutory Requirements The fitting of this fire front must be carried out by a competent person, in accordance with the current issue and relevant requirements of:- Manufacturer s instructions, supplied. The Gas Safety (Installation and Use) Regulations, The Building Regulations, The Building Standards (Scotland) Regulations, (applicable in Scotland), Local gas undertaking, Health and Safety at Work Act, Control of Substances Hazardous to Health, The Electricity at Work Regulations and any applicable local regulations. Detailed recommendations are contained in the current issue of the following British Standards and Codes of Practice:- BS5440 Parts 1 and 2, BS5871, BS6891. Manufacturer s instructions must not be taken as overriding statutory requirements. SHELF DEPTH MAX FLAT AREA FIRE FRONT FIXING FACE OUTLINE OF FIRE FRONT 5111 PREPARED BASE MINIMUM FLAT AREA AND FIXTURES CLEARANCES Diagram B.S.I Certification This fire front is certificated to the current issue of BS5258 Part 8 invoking the current issue of BS6332 for safety and performance, it is, therefore, important that no change is made, without permission, in writing, from Hepworth Heating Ltd. Any change that is not approved by Hepworth Heating Ltd., could invalidate the B.S.I. Certification, the warranty and could infringe the statutory requirements. CE Mark The CE Mark on this appliance shows compliance with:- 1. Directive 90/396/EEC on the approximation of the Laws of the Member States relating to appliances burning gaseous fuels. 2. Directive 89/336/EEC on the approximation of the Laws of the Member States relating to electro magnetic compatibility. 1.5 Fire Front Location This fire front can only be fitted to a Glow-worm 45/2 or 56/2 back boiler unit, which itself has been installed in accordance with the Glow-worm installation instructions. The back boiler air duct acts as a support for the fire front. The fire front must be secured to the vertical fire front fixing wall face, at the top. This wall face may be a chimney breast or surround, see diagram 1.2. The fire front flue spigot projects into the back boiler flue collection assembly. The gas supply is taken from the back boiler service cock. The back boiler must have been correctly positioned in the builder s opening as the fire front is located by connection to the back boiler. 1.6 Clearances Restrictions should not be placed around the assembled fire front, see diagram 1.2. A shelf up to 150mm deep may be fitted above, with a minimum space of 100mm between the top of the fire front and the underside of the shelf, see diagram 1.2. There should be a clearance of at least 1metre from any part of the radiant heating surface to any combustible side wall or fixture B

4 2 Types of Installation 2.1 With Hearth A fire proof hearth under the fire front must have the minimum dimensions as shown in diagram With Surround The opening in a surround should not be greater than 580mm wide. The surround must have a minimum, clear, flat area as shown in diagram 1.2. Any projections on the surround must be outside this area. Any combustible material on the fire front fixing wall face area of the surround must be removed, see diagram 2.3. This area, to the depth removed should then be rendered with a sand/cement mixture OUTLINE OF FIRE FRONT 710 NON-COMBUSTIBLE MATERIAL Without Surround or Hearth The fire front fixing wall face must be flat over an area as shown in diagram 1.2, this also shows the minimum clearances for shelves or projections on the fire front fixing wall face. The front opening in the fire front fixing wall face should not be greater than 580mm wide. Any combustible material on the fire front fixing face area must be removed, see diagram 2.3. This area, to the depth removed, should then be rendered with sand/ cement mixture. MINIMUM HEARTH DIMENSIONS REMOVE COMBUSTIBLE MATERIAL FROM THIS AREA 648 BUILDERS OPENING INSTALLATION CENTRE LINE C L Diagram PREPARED BASE REMOVAL OF COMBUSTIBLE MATERIAL Diagram Refer to the current issue of BS5440 Part 1. The back boiler flue collector assembly accepts the fire front flue spigot. Note. Provision must have been made during the installation of the back boiler for the total ventilation requirement of the combined fire front and back boiler unit. Refer to the relevant Section in the Back Boiler Installation Instructions. 3 Flue and Ventilation B 4

5 4 Fire Front Preparation 4.1 Unpacking Lift out the plinth pack containing the plinth, loose items pack and inlet supply tube pack. Remove the top fittings and lift out the fire front. Do not lift by the louvres. Note. There is a packing piece attached to the bottom of the fire front. Lay the fire front down on its back. Remove the packing piece, unscrew the two transit legs and throw them away, see diagram 4.1. Remove the wood transit strips, secured with panel pins, from the bottom of the wooden case sides. Check contents of loose items pack against the packed list. 4.2 Casing Removal With the fire front on its back, remove case securing screws at left and right hand sides, see diagram 4.2. Ease the bottom of the casing upwards and away to disengage the upper lugs, withdraw from the heat exchanger. Place casing aside, on its back, until required. Take care not to damage the rear surround side louvres. TRANSIT LEG (2) PACKING PIECE SECURING SCREW (4) 5387 Diagram 4.1 SECURING SCREW 4.3 Radiants To remove radiant pack, lift and pull bottom forwards, see diagram 4.3. Unpack radiants and place carefully on one side until required. Diagram RADIANT PACK Diagram B

6 4 Fire Front Preparation 4.4 Flue Spigot Assembly Stand the fire front upright, unscrew flue spigot from base of fire front. Fit the flue spigot using the eight self tapping screws supplied in the loose items pack, see diagram 4.4. SPIGOT SECURING SCREWS (8) Gas Supply to Fire Front The inlet supply tube is packed with the fire front plinth in the loose items pack. This supply tube may need to be cut, at the plain end, dependent on the model and position of the back boiler in the opening. Measure the distance C, see diagram 4.5, from the front mark P on the air duct to the fire front fixing wall face. Use a straight edge across the opening. FLUE SPIGOT Diagram 4.4 Shorten the plain end of the gas supply tube by the distance C. No shortening is required when P is level with the fire front fixing wall face, C being zero. The maximum distance for C will be 67mm. Deburr the tube end inside and out. *'C'=Distance from fire front fixing wall face to datums on back boiler air duct. This represents the length of pipe that requires cutting off. BACK BOILER AIR DUCT (MAX SHOWN) *'C' 1558 *'C' FIRE FRONT FIXING FIRE FRONT WALL FACE GAS SUPPLY TUBE Diagram B 6 Supplied By spares.co Tel

7 5 Installation 5.1 Back Boiler Sensing Tube Remove and discard the plastic ferrule from the bulkhead connection on the Back Boiler air duct. Fix the flared end of the back boiler sensing tube to the bulkhead connection on the boiler air duct with the tubing nut provided. Slide the sensing tube fitting assembly over the back boiler sensing tube and fix to the casting with the thread cutting screw (taptite) provided, see diagram 5.1. Fit the sensing tube filter onto the fitting assembly, see diagram 5.1. Take care not to damage the filter. IMPORTANT: Make sure that the sensing tube fitting assembly is pushed back to the front face of the boiler casting and check 1mm. distance is achieved and back boiler sensing tube does not extend above sensing tube fitting, see diagram 5.1. Note: After fitting the combustion products discharge safety device sensing tube please refer to the 'Commisioning' section of the back boiler unit and relight the boiler to test the device. SENSING TUBE FITTING ASSEMBLY 1 mm TUBING NUT FILTER THREAD CUTTING SCREW(Taptite) SENSING TUBE FITTING ASSEMBLY FRONT FACE OF BOILER BACK CASTING BOILER SENSING TUBE BULKHEAD CONNECTION BOILER AIR DUCT 6129 Diagram Positioning the Fire Front Place the fire front onto the back boiler air duct, check that the fire front flue spigot is central in the flue collector assembly, push into contact with the fire front fixing wall face, see diagram 5.2. Mark the fire front fixing points through the mounting bracket holes, at the top, see diagram 5.3. Pull the fire front forwards and remove. Drill the fire front fixing wall face, using a 10mm masonry drill to a minimum depth of 40mm to accept the anchor nuts and screws, supplied in the loose items pack. Place anchor nuts and screws into holes, screw up, but leave sufficient thread proud the accept the fire front. Note. If the fire front fixing face is not of a solid construction, to a minimum depth of 40mm, that is, hollow brick or metal an alternative and rigid form of fastening must be used and extra care taken. FLUE COLLECTOR ASSEMBLY BACK BOILER AIR DUCT SECURING SCREW (2) FIRE FRONT FIXING WALL FACE GAS SERVICE COCK Diagram 5.2 ANCHOR NUT FIRE FRONT MOUNTING HOLES Enlarged view of mounting bracket Diagram B

8 5 Installation 5.3 Securing Refer to diagram 5.4. Offer the fire front up at a slight angle to engage fire front spigot, position mounting bracket holes over the screws in fire front fixing wall face. Lower fire front to locate fire front flue spigot into flue collector assembly and onto back boiler air duct, push back onto fire front fixing wall face, tighten up securing screws. SECURING SCREW (2) FLUE COLLECTOR ASSEMBLY Gas Connection Position the tubing nut and olive, packed in the loose items pack onto the prepared end of the gas supply tube, see diagram 5.5. Connect the gas supply tube, the flared end to the elbow on the gas tap, the plain end to the gas service cock, tighten at each end, see diagram 5.5. BACK BOILER AIR DUCT Diagram UNION NUT GAS SUPPLY TUBE GAS SERVICE COCK TUBING NUT OLIVE Diagram Commisioning 6.1 Initial Lighting The fire front is fitted with a combustion products discharge safety device which will shut it down if there is a lack of oxygen. If the fire front shuts down frequently for no apparent reason the first things to be checked are the chimney and air inlets into the room. An additional cause may be that the filter in the gas tap has become blocked, to check refer to Fire Front Fault Finding Chart. Any problems found must be put right, by a competent person, before the fire front is used again. The combustion products discharge safety device MUST NOT be adjusted or disconnected. If replacing use only the correct and approved parts. Take large washer and fire front control knob from loose items pack. Place large washer over connecting rod and fit fire front control knob. Check that the control knob is in the Off position, that is indicator pointing along the fire front to the left. Turn gas service cock to back boiler and fire front ON, see diagram 6.1. Test for gas soundness at the connections of the fire front supply tube, previously fitted, using a suitable leak detection fluid. Remove silencer securing screw and silencer, see diagram B 8

9 6 Commisioning Remove the pressure test point screw from gas tap, see diagram 6.2 and connect a suitable pressure gauge. To light the fire front, refer to diagram 6.3 and Instructions for Use. Note. Air may be present in the supply tube so the initial lighting operation may need to be repeated. Wait 10 seconds before repeating lighting operation. GAS SERVICE COCK UNION 3924 S 6.2 Testing With the fire front working at full rate, allow to warm up for ten minutes. Check that inlet gas pressure is as stated in Data Section of these instructions or refer to data label. Check for gas soundness at all joints and gas carrying components using a suitable leak detection fluid. If there is any doubt about the gas rate check at the meter, having first turned off all other gas appliances and pilot lights. The rate for this fire front is about 3 minutes 32 seconds for 1ft 3. Turn the control knob fully clockwise to the Off position, that is, indicator pointing along the fire front to the left. Remove the pressure gauge, replace the test point screw, make sure a gas tight seal is made. Replace the silencer. When the fire front is cold fit the radiants, having first removed the polythene wrappings. Insert the top of the radiant first and lower to fit between the lower front and rear support. The top of the radiant must rest back onto the upper support, see diagram 7.3. It will be found easier to insert the radiants at the centre and move them left and right. BACK BOILER ONLY 'ON' TURNED FULLY CLOCKWISE BACK BOILER & FIRE FRONT 'ON' TURNED TO MID POSITION 90 'OFF' TURN FULLY ANTI- CLOCKWISE 180 Diagram B

10 6 Comissioning 6.3 Test for Clearance of Products Note: 1. Take care. The appliance gets hot during testing. 2. To carry out test on boiler you will need a 300mm smoke match extension and a torch. 3. Before inserting the match mark extension at 40mm, see diagram For test insert smoke match at each side and view for spillage above fire front spigot as shown in diagram 6.5. TEST: WHERE NO FAN IS PRESENT Close all outside doors and doors and windows in the room in which the appliance is installed. Light the fire front only. After 5 minutes apply spillage tests as shown in diagram 6.4 and 6.5. During tests smoke should be drawn into the fire front heat exchanger canopy and the boiler draught diverter. If spillage occurs leave fire front alight for up to a further 10 minutes and repeat tests. Next, light the boiler only. After 10 minutes apply spillage tests as shown in diagram 6.4 and 6.5. During tests smoke should be drawn into the fire front heat exchanger canopy and boiler draught diverter. If spillage occurs, leave the boiler alight for up to a further 5 minutes and repeat tests. Now light the boiler and fire front. After 10 minutes apply spillage tests as shown in diagram 6.4 and 6.5. During tests smoke should be drawn into the fire front heat exchanger canopy and boiler draught diverter. If spillage occurs, leave the boiler and fire front alight for up to a further 5 minutes and repeat tests. TEST. WHERE A FAN IS PRESENT (A fan means an extract fan, or a fan for other open flued appliances, or a circulating fan for a warm air unit, whether or not gas fired). With the fan switched off carry out the appropriate spillage test with all doors and windows closed, as above. If the above tests are satisfactory continue as follows, Open all doors connecting the room containing the appliance and the room in which the fan is fitted. Close all other doors and windows in the premises. If the fan is in the same room as the appliance close all doors and windows in that room. Switch on fan and repeat spillage test as above. In ALL cases, if spillage continues after the specified test periods steps MUST be taken to put right the fault(s). Possible causes include, flue obstructions, down draught or restricted fresh air supply into the room. Engage the two casing lugs to locate into the slots of the fire front, see diagram 6.6. Secure the casing with the casing securing screws, previously removed, at left and right hand sides, see diagram 6.7. Carefully locate top of plinth into sliders and push it back as far as it will go. PRESSURE TEST POINT SCREW SETTING 4 4 SETTING SETTING All 3 radiants FULL Centre radiant FULL End radiants HALF 5115 Diagram 6.2 Centre radiant only FULL Case Fitting Leave fire front control knob in place. Offer the casing to the fire front, inclining it back at the top, passing control knob through hole in casing at the right SETTING 1 2 Centre radiant only HALF Diagram B 10

11 6 Commissioning 6.5 Instruct the User in the Correct Operation of the Fire Front and Back Boiler Hand the Instructions for Use to the user and instruct in the correct use of the fire front and back boiler, including lighting the fire front with a match. Advise that any smell which may be apparent on initial lighting is quite normal and will quickly disappear after a short period of use. Important. Advise that soft wall coverings, for example, blown vinyl wallpaper, are easily affected by heat, they may, therefore, scorch or become discoloured when close to a heating appliance. This should be borne in mind when having a heating appliance installed and when redecorating. Advise that to ensure the continued efficient and safe operation of the appliance it is recommended that it is checked and serviced at regular intervals. The frequency of servicing will depend upon the particular installation and usage, but in general once a year should be enough. Draw attention, if applicable, to the current issue of the Gas Safety (Installation and Use) Regulations, Section 35, which imposes a duty of care on all persons who let out any property containing a gas appliance. It is the Law that any servicing must be carried out by a competent person. Advise that the boiler is fitted with a Combustion Products Discharge Safety Device and refer to the Instructions for Use. Reminder, leave these instructions with the user. CASING LOCATION BRACKET (Fitted to chassis) 5124 HEAT EXCHANGER CANOPY SMOKE MATCH TIP 1679 MATCH EXTENSION RADIANT CASING LOCATION PIN (Fitted to casing) Diagram DIVERTER PLATE Mark extension smoke match 1889 Diagram PLINTH FIRE FRONT SPIGOT NOT SHOWN FOR CLARITY 300 SMOKE MATCH EXTENSION Diagram 6.5 SECURING SCREWS Diagram B

12 7 Servicing 7.1 Servicing Notes MAKE SURE FIRE FRONT IS COLD. Servicing must be carried out by a competent person. The combustion products discharge safety device MUST NOT be adjusted or disconnected. If replacing use only the correct and approved parts. Before starting a service, turn gas service cock OFF, see diagram 6.1. Isolate the electrical supply to the back boiler. After completing a service, always test for gas soundness and carry out functional check of controls. Unless stated otherwise all parts are replaced in the reverse order to removal. If any parts require replacement, refer to Replacement of Parts Section. Note. It is recommended that after removal of the radiants the fire front be removed from the back boiler to ease the servicing and maintenance operations. 7.2 Casing Removal Remove the fire front plinth by sliding it forward until it disengages, see diagram 6.7. Remove case securing screws at left and right hand sides, see diagram 6.7. Ease the bottom of the casing forwards and lift to disengage the upper lugs, withdraw forwards. To exchange a radiant first ensure the fire front is cold and remove dressguard. Lift up the radiant at the bottom and withdraw forward. RADIANT UPPER SUPPORT LOWER BACK SUPPORT 0723 Diagram 7.1 Insert top of radiant first, then the bottom and lower into position between the support angles. Ensure that the top of the radiants rest back against the upper support Radiant Removal Lift up the centre radiant from the bottom and withdraw forwards, move the other radiants to the centre and remove in a similar way, see diagram 7.1. Before replacing radiants remove any loose debris from the top of the burner. Clean all around the fire front chassis, burner and injectors with a soft brush or vacuum cleaner. Take care not to damage the Combustion Products Discharge Safety Device. To replace, insert top radiant first, then the bottom, lower into position, see diagram 7.2. It will be found easier to replace radiants at the centre and move left and right. It is recommended that the radiant position be changed from time to time. LOWER FRONT SUPPORT Diagram B 12

13 7 Servicing BURNER SECURING SCREW (2) CONNECTING ROD SPLIT PIN 5117 PIEZO COMBUSTION PRODUCTS DISCHARGE SAFETY DEVICE SECURING SCREWS (2) ELECTRODE PILOT TUBE PILOT TUBE NUT GAS SUPPLY TUBE NUT GAS SUPPLY TUBE IGNITION LEAD (CLEAR END) SILICONE COVER TUBE NUT IGNITION LEAD THERMOCOUPLE COMBUSTION PRODUCTS DISCHARGE SAFETY DEVICE PILOT TUBE THERMOCOUPLE NUT Diagram Fire Front Disconnection Disconnect union nut at elbow at gas tap, see diagram 5.5. Slacken, but do not remove, mounting bracket screws, see diagram 5.3. Pull fire front forwards at the bottom, tilt and lift to disengage fire fixing screws from mounting bracket holes, remove from the back boiler. 7.5 Burner and Injectors Disconnect thermocouple nut and pilot tube nut at gas tap, see diagram 7.3. NOTE Take care as there is a filter in the pilot port. Remove connecting rod split pin. Release the connecting rod from the gas tap assembly see diagram 7.3. Support the burner and unfasten burner securing screws, see diagram 7.3. Lower burner and gas tap assembly taking care not to damage the thermocouple lead and pilot tube. Disconnect lead from piezo. Remove silencer securing screw and silencer, remove the locknut securing the gas tap, see diagram 7.4. The upper and lower injectors can be unscrewed from the gas tap, see diagram 7.4. Clean injectors as necessary. Do not clean injectors with a wire or sharp instrument. Clean the burner with a soft brush, or vacuum cleaner. Refit injectors in correct positions, see diagram B

14 7 Servicing GAS TAP FILTER 5469 UPPER INJECTOR CROSS SECTION VIEW LOWER INJECTOR LOCKNUT SILENCER SECURING SCREW FILTER GAS TAP Diagram Combustion Products Discharge Safety Device Check the condition of the electrode and thermocouple, clean with a soft brush, see diagram 7.3. Make sure the electrode is in line with the earth post and the spark gap is as shown in diagram 7.5. NOTE: It is recommended that the back boiler be serviced before refitting the fire front, refer to Back Boiler Installation Instructions. EARTH POST ELECTRODE 5119 SPARK GAP Fire Front Refitting See relevant part of Section 5.3 and 5.4 ELECTRODE C L EARTH POST TOP VIEW Diagram B 14

15 8 Replacement of Parts 8.1 Notes on Replacing Parts MAKE SURE FIRE FRONT IS COLD. Replacement of parts should be carried out by a competent person. Before removing or replacing any fire front part, turn gas service cock to Back Boiler Only On, see diagram 6.1. Isolate the electrical supply to the back boiler. After replacing or disconnecting any gas carrying part, always test for gas soundness and carry out functional check of controls. Unless stated otherwise all parts are fitted in the reverse order to removal. 8.2 Dress Guard and Radiants To remove the dress guard, grasp at the sides and flex centre outwards to release two location pins on one side then the other, see diagram 8.1. Take care not to damage the chrome with the dress guard location pins. To change a broken radiant, refer to relevant parts of Section Injectors Remove casing as Section 7.2. Remove injectors as Section Gas Tap Remove casing as Section 7.2. Disconnect lead at piezo, see diagram 7.3. Disconnect thermocouple nut, pilot tube nut and gas supply tube nut, see diagram 7.3. NOTE Take care as there is a filter in the pilot port. Remove connecting rod split pin. Release the connecting rod from the gas tap assembly, see diagram 7.3. Remove silencer, see diagram 7.4. Remove locknut securing gas tap, see diagram 7.4. Remove the gas tap. 8.5 Piezo Unit Remove casing as in Section 7.2. Proceed as the relevant parts of Section 8.4. With the tap in the Off position, fully clockwise, remove the two screws and washers securing the piezo unit bracket to the tap. Take care when removing as there is a spring underneath the bracket. LOCATING PINS 1678 Diagram Combustion Products Discharge Safety Device Remove casing as Section 7.2. Disconnect lead silicone cover. Disconnect lead and pilot tube nut from Combustion Products Discharge Safety Device. Disconnect thermocouple nut from gas tap, remove Combustion Products Discharge Safety Device securing screws, see diagram 7.3. Remove Combustion Products Discharge Safety Device. 8.7 Ignition Lead Remove casing as Section 7.2. Disconnect lead silicone cover. Disconnect the lead at each end and remove. Fit new lead with clear end to electrode, see diagram 7.3. Check the fire front system, by reference to the relevant part of Section Burner Remove casing as Section 7.2. Remove burner as relevant part of Section and 7.5. Remove gas tap as Section 8.4 and Combustion Products Discharge Safety Device as Section Gas Tap Pilot Filter Remove the casing as Section 7.2. Remove the gas tap as Section 8.4. The filter, which is very small, is in the pilot port of the gas tap, to remove use a small non-metallic tool. When fitting the replacement it is important that the filter is seated correctly as shown in diagram B

16 9 Fault Finding START HERE Fire will not light 5466 across gap, Turn off appliance tap; turn on appliance tap and observe spark No spark across gap no Ensure gap is within specified tolerance, refer to SERVICING Turn tap to energise igniter Check that gas is available. Does the pilot light using a match. YES NO Change pilot filter. Using a match, ensure correct functioning of burner in all setting positions. Check that electrode and piezo unit connections are satisfactory. Check that burner pressure is as specified. Correct any fault found. across gap, No spark across gap no Disconnect lead from electrode, place connector within 4mm of burner and operate piezo across gap, no Replace faulty electrode and reassemble system across gap, no Ensure gap is within specified tolerance. Turn tap to energise igniter across gap, no Remove lead from piezo unit and place screwdriver between appliance chassis earth and piezo unit, leaving 4mm gap between blade and spade connector. Operate igniter. across gap No spark across gap Renew lead and reassemble system across gap, no Change piezo unit and reassemble system across gap Check several times that is satisfactory END FIRE FRONT IGNITION FAULT FINDING Diagram B 16

17 9 Fault Finding 5243 Disconnect appliance thermocouple from the gas tap. Check that all connections are clean and in good condition. Fit test meter interrupter into the magnet unit. Fit appliance thermocouple into the test meter interrupter. Hold down control tap in position. Ignite burner, allowing thermocouple to attain operating temperature. Measure the OPEN CIRCUIT voltage. Is voltage greater than 15mV? NO YES Faulty thermocouple. Replace combustion products discharge safety device. Note the open circuit reading then measure the CLOSED CIRCUIT voltage. Note this voltage. Referring to the diagnosis graph, mark the open circuit voltage on the VERTICAL axis, and the closed circuit voltage on the HORIZONTAL axis. Note the point where these two values intersect on the graph. THERMOCOUPLE CIRCUIT IS SATISFACTORY B In which area of the graph is the intersect C A Faulty thermocouple. Replace combustion products discharge safety device. Faulty magnet unit in gas tap. Replace gas tap Diagram Fire Front Ignition Remove casing as Section 7.2. Refer to Fire Front Ignition Fault Finding, diagram Thermocouple To test a thermocouple, a meter with a range of 0 to 30mV is required together with a thermocouple interrupter test unit. Refer to Fault Finding diagram 9.2 and Diagnosis Graph diagram Combustion Products Discharge Safety Device If the device operates it indicates there could be a problem with the chimney or, the pilot filter in the gas tap is blocked. First make sure air vents are free from obstruction, by carrying out spillage checks as Section 6.3. If all is in order refer to diagram 9.1 to check if the pilot filter is blocked. Open Circuit Voltage (millivolts) A B C 0065M Closed Circuit Voltage (millivolts) DIAGNOSIS GRAPH FOR FIRE THERMOCOUPLE CIRCUIT Diagram B

18 10 Spare Parts 10.1 Part Identification The key number of the list will identify the part number and description, see diagram Ordering When ordering spare parts quote the part number and description, stating the model Melody BBU and serial number of the fire front from the data label. The data label can be seen after the casing has been removed as in Section 7.2. If ordering from British Gas you will also require the fire front GC number in addition to the GC number of the part Diagram 10.1 Key No. Part No. Description GC No Dress guard assembly Radiant pack Control knob assembly Combustion Products Discharge Safety Device *** *** 5 WW4615 Ignition lead Injector - lower *** *** Injector - upper *** *** Gas tap and piezo *** *** Piezo unit - spare Filter *** *** B 18

19 11 Supplementary Instructions These fire fronts are fitted with combustion products discharge safety devices. As these fire fronts may be fitted to Glow-worm 45, 56, 45R or 56R back boiler units WITHOUT a combustion products discharge safety device, the following instructions must be read and followed in place of those in the main Installation and Servicing Instructions. To check if a combustion products discharge safety device is fitted, refer to the inset in diagram, if one is fitted this supplement MUST be ignored. General To fit the fire front to one of the above EXISTING GLOW-WORM BACK BOILER UNITS follow the instructions below. Installation 1. Do not fit the back boiler sensing tube as required in the main installation and servicing instructions. 2. If necessary isolate the power supply to the back boiler unit and remove the existing wiring used previously for a fire front with lights. 3. Any references in the installation and servicing instructions to the back boiler unit combustion products discharge safety device must be ignored. Lighting the Boiler The boiler controls are placed behind the fire front plinth. To remove the plinth, pull it gently forwards until it is free. Refer to diagram 11.1 to identify controls. Turn off the electrical supply at the mains supply outside the appliance. Check that all controls are calling for heat. The clock, room thermostat and programmer, if fitted, will be away from the unit, see manufacturer s instructions supplied with them. Turn the thermostat control knob B to Off position, that is, fully anticlockwise, Off to be against the pointer. Push in and slightly turn gas control knob A clockwise until is against its setting point, that is, set to Off. Push in slightly and turn gas control knob A anticlockwise until is against its setting point, then push fully in and hold in. At the same time press and release piezo button D until pilot burner E lights. Look at flame through viewing window F. At initial lighting of the boiler air may be present and several attempts may be needed to light the pilot. Keep the control knob A pushed in whilst operating the button. When the pilot is alight and stable, keep knob A fully pushed in for about 15 seconds then release. Check that the pilot is still alight, look through window F. If the pilot burner fails to stay alight turn gas control knob A Off. that is, fully clockwise. Wait three minutes. Repeat the lighting operation, only now keep the control knob A pushed in for a little longer than before after the pilot has lit. NOTE. Always wait three minutes before attempting to relight the pilot after it has gone out for any reason. Push control knob A in slightly and turn clockwise until is against the setting point. Note. If gas control knob A is turned until is against the setting point, a safety lock prevents it being turned on again. No attempt should be made to turn the valve on again until at least three minutes have elapsed. Turn on the electrical supply to the unit. Turn the boiler thermostat knob B clockwise until MAX is against the setting point, the main burner will light. Adjust the thermostat to the required setting between MIN and MAX. MAX is about 82oC. Check that all external controls are set to your requirements. Refit the plinth by carefully locating the top edge of the plinth into the sliders, then push gently back as far as it will go B

20 11 Supplementary Instructions INSET: Showing a Combustion Products Discharge Safety Device fitted 'E' PILOT BURNER SETTING POINT 'F' VIEWING WINDOW 'B' THERMOSTAT CONTROL KNOB 'D' PIEZO UNIT BUTTON 'A' GAS VALVE CONTROL KNOB SETTING POINT OFF PILOT/IGNITION MAIN BURNER BOILER CONTROLS Diagram 11.1 Control of Substances Hazardous to Health Information for the Installer and Service Engineer. Under Section 6 of The Health and Safety at Work Act 1974, we are required to provide information on substances hazardous to health. The adhesives and sealants used in this appliance are cured and give no known hazard in this state. RADIANTS After handling wash hands thoroughly. INSULATION PADS/CERAMIC FIBRE These can cause irritation to skin, eyes and the respiratory tract. If you have a history of skin complaint you may be susceptible to irritation. High dust levels are usual only if the material is broken. Normal handling should not cause discomfort, but follow normal good hygiene and wash your hands before eating, drinking or going to the lavatory. If you do suffer irritation to the eyes or severe irritation to the skin seek medical attention. Because of our constant endeavour for improvement details may vary slightly from those in the instructions B 20

Instructions for Use Installation & Servicing To be left with the user

Instructions for Use Installation & Servicing To be left with the user 221904D.04.02 Instructions for Use Installation & Servicing To be left with the user FIRELITE 4 BBU FIRE FRONT G.C. No. 37-047-13 CONTOUR 4 BBU FIRE FRONT G.C. No. 37-047-14 MIAMI 4 BBU TEAK FIRE FRONT

More information

Instructions for Use Installation and Servicing

Instructions for Use Installation and Servicing 221906B.02.02 Instructions for Use Installation and Servicing To be left with the user BLACK BEAUTY 4 BBU Fire Front 9514 FOR USE WITH BBU 45/4 & BBU 54/4 G.C. No. 37-047-17 This is a Cat I 2H Appliance

More information

Installation & Service Instructions

Installation & Service Instructions Part No. 966/9350/1 02 Potterton Housewarmer Illusion ASD - G.C. NO. 37 590 16 966 Inset DGF with ILLUSION FACIA Potterton Housewarmer Stratton ASD - G.C. NO. 37 590 17 966 Inset DGF with STRATTON FACIA

More information

INSTALLATION INSTRUCTIONS COMPACT GAS STOVE MODEL NUMBER 550

INSTALLATION INSTRUCTIONS COMPACT GAS STOVE MODEL NUMBER 550 INSTALLATION INSTRUCTIONS COMPACT GAS STOVE MODEL NUMBER 550 Before installation ensure that the local distribution conditions (identification of the type of gas and pressure) and the adjustment of the

More information

Dovre 250 Cast Iron Gas Stove

Dovre 250 Cast Iron Gas Stove Dovre 50 Cast Iron Gas Stove NATURAL GAS AND LPG INSTALLATION, SERVICING AND USER INSTRUCTIONS THIS PRODUCT IS FOR USE ONLY IN GREAT BRITAIN AND IRELAND These instructions are to be left with the customer,

More information

Instructions for Use Installation and Servicing

Instructions for Use Installation and Servicing 221808B.12.00 Instructions for Use Installation and Servicing To be left with the user Hideaway 50 G.C. No. 41 313 15 1037 Open Flue Boiler This is a Cat I 2H Appliance BS 6332 BS 5258 Reference in these

More information

OWNER S GUIDE MODEL BR417 VA

OWNER S GUIDE MODEL BR417 VA 600B702/06 OWNER S GUIDE MODEL BR417 VA (G.C.32-032-07) Inset Live Fuel Effect Gas Fire with Ultimate Front AS SUPPLIED, THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) WHEN CONVERTED USING VALOR CONVERSION

More information

INSET LIVE FUEL EFFECT GAS FIRE

INSET LIVE FUEL EFFECT GAS FIRE 600B741/02 OWNER S GUIDE MODEL BR650 VA (GC No. 32-032-39) INSET LIVE FUEL EFFECT GAS FIRE THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) WHEN CONVERTED USING CONVERSION KIT NO.591149 THIS APPLIANCE

More information

Instructions for Use Installation and Servicing

Instructions for Use Installation and Servicing 221755A.10.00 Instructions for Use Installation and Servicing To be left with the user Hideaway 70 G.C. No. 41 313 82 0991 Open Flue Boiler This is a Cat I 2H Appliance BS 6332 BS 5258 Reference in these

More information

MODEL 466 Radiant / Convector Gas Fire Black Beauty

MODEL 466 Radiant / Convector Gas Fire Black Beauty I N S T A L L E R G U I D E MODEL 466 Radiant / Convector Gas Fire Black Beauty Please keep in a safe place for future reference 600A734/02 Please leave this Installer Guide with the user This appliance

More information

OWNER S GUIDE ETERNITY. MODEL 540C (GC No ) INSET BALANCED FLUE GAS FIRE

OWNER S GUIDE ETERNITY. MODEL 540C (GC No ) INSET BALANCED FLUE GAS FIRE 600B637/02 ETERNITY MODEL 540C (GC No. 32-032-19) INSET BALANCED FLUE GAS FIRE THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND THE REPUBLIC OF

More information

Glow-worm 45/2 Back Boiler Unit

Glow-worm 45/2 Back Boiler Unit 221780A.07.00 Installation and Servicing Instructions To be left with the user Glow-worm 45/2 Back Boiler Unit GC No 44 315 39 For use with specially designed Glow-worm fire fronts only 8010 References

More information

Hideaway 40B G.C. No

Hideaway 40B G.C. No 221691B.12.00 Instructions for Use Installation and Servicing To be left with the user Hideaway 40B G.C. No. 41 313 16 0863 Balanced Flue Boiler This is a Cat I 2H Appliance BS 6332 BS 5258 Reference in

More information

BLACK KNIGHT 2 - Classic Collection

BLACK KNIGHT 2 - Classic Collection BLACK KNIGHT 2 - Classic Collection Installation & Servicing Instructions (GC No. 32 170 16) IMPORTANT - THIS FIRE DOES NOT NORMALLY REQUIRE ADDITIONAL VENTILATION INTO THE ROOM IN WHICH IT IS INSTALLED

More information

Baxi Bermuda SL3. Fireside Gas Central Heating Unit Comp No Issue 4 1/00. Installation and Servicing Instructions

Baxi Bermuda SL3. Fireside Gas Central Heating Unit Comp No Issue 4 1/00. Installation and Servicing Instructions Baxi Bermuda SL3 Fireside Gas Central Heating Unit Comp No. 237883 - Issue 4 1/00 Installation and Servicing Instructions Natural Gas B.S. Codes of Practice STANDARD SCOPE Baxi Bermuda SL3 B.S. 6891 Gas

More information

RADIANT / CONVECTOR GAS FIRE MODEL 426 (GC ) INSTALLATION & SERVICING INSTRUCTIONS INSTALLER: Please leave these instructions with the owner

RADIANT / CONVECTOR GAS FIRE MODEL 426 (GC ) INSTALLATION & SERVICING INSTRUCTIONS INSTALLER: Please leave these instructions with the owner THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) AT A SUPPLY PRESSURE OF 20mbar (8in w.g.) THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND THE REPUBLIC OF IRELAND (IE) RADIANT / CONVECTOR GAS

More information

OWNER GUIDE. Model 739 OPEN DECORATIVE GAS FIRE. (GC No )

OWNER GUIDE. Model 739 OPEN DECORATIVE GAS FIRE. (GC No ) 5113426/01 OWNER GUIDE Model 739 OPEN DECORATIVE GAS FIRE (GC No. 32-032-54) THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20). WHEN CONVERTED USING CONVERSION KIT NO. 0595211 THIS APPLIANCE IS FOR USE

More information

50CF G.C. No

50CF G.C. No 221787B.11.00 Instructions for Use Installation and Servicing To be left with the user 2143 50CF G.C. No. 41 319 49 Open Flue Boiler This is a Cat I 2H Appliance BS 6332 BS 5258 Reference in these instructions

More information

OWNER GUIDE. Anthem, Bolero, Camden, Minima, Victorian or Westminster fascia

OWNER GUIDE. Anthem, Bolero, Camden, Minima, Victorian or Westminster fascia 5114465/01 OWNER GUIDE Model 741 INSET LIVE FUEL EFFECT GAS FIRE Fitted with Anthem, Bolero, Camden, Minima, Victorian or Westminster fascia (GC No. 32-032-56) THIS APPLIANCE IS FOR USE WITH NATURAL GAS

More information

(manual control) (ezi-slide control) INSET COAL EFFECT GAS CONVECTOR FIRE V1/100/B INSTALLATION & USER INSTRUCTIONS

(manual control) (ezi-slide control) INSET COAL EFFECT GAS CONVECTOR FIRE V1/100/B INSTALLATION & USER INSTRUCTIONS Model Number: V1/100/A V1/100/B (manual control) (ezi-slide control) INSET COAL EFFECT GAS CONVECTOR FIRE INSTALLATION & USER INSTRUCTIONS GB IE SUITABLE FOR USE ON NATURAL GAS (G20) AT 20mbar SUPPLY PRESSURE

More information

Glow-worm 56/3e Back Boiler Unit

Glow-worm 56/3e Back Boiler Unit 221725B.10.00 Installation & Servicing Instructions To be left with the user Glow-worm 56/3e Back Boiler Unit G.C. No. 44 047 04A This Back Boiler Unit Is To Be Used Only With The Glow-worm Mk.3 Fire Front

More information

MULTIPOINT BF Gas Fired Balanced Flue Water Heater

MULTIPOINT BF Gas Fired Balanced Flue Water Heater Please leave these instructions with the user MULTIPOINT BF Gas Fired Balanced Flue Water Heater User Operating, Installation and Servicing Instructions 6 720 607 090 (03.12) JS Natural Gas Main Multipoint

More information

OWNER GUIDE. Model 750. INSET LIVE FUEL EFFECT GAS FIRE Fitted with Harmony, Avignon or Style fascia. (GC No )

OWNER GUIDE. Model 750. INSET LIVE FUEL EFFECT GAS FIRE Fitted with Harmony, Avignon or Style fascia. (GC No ) 5112499/01 OWNER GUIDE Model 750 INSET LIVE FUEL EFFECT GAS FIRE Fitted with Harmony, Avignon or Style fascia (GC No. 32-032-58) THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) WHEN CONVERTED USING CONVERSION

More information

MODEL 466 Radiant / Convector Gas Fire Black Beauty

MODEL 466 Radiant / Convector Gas Fire Black Beauty O W N E R G U I D E MODEL 466 Radiant / Convector Gas Fire Black Beauty This Owner Guide is intended to help you care for your Valor gas fire. Please read carefully before using your gas fire and keep

More information

Sonnet Plus Anthem Genesis Soraya

Sonnet Plus Anthem Genesis Soraya 5108617/01 OWNER GUIDE Sonnet Plus Anthem Genesis Soraya Model 746 (GC No. 32-032-57) INSET LIVE FUEL EFFECT GAS FIRE THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) WHEN CONVERTED USING CONVERSION KIT

More information

ULTIMATE INSET LIVE FUEL EFFECT GAS FIRE MODEL 417 OWNER GUIDE

ULTIMATE INSET LIVE FUEL EFFECT GAS FIRE MODEL 417 OWNER GUIDE ULTIMATE INSET LIVE FUEL EFFECT GAS FIRE MODEL 417 OWNER GUIDE THE NATURAL GAS MODEL IS FOR G20 AT A SUPPLY PRESSURE OF 20mbar THE PROPANE GAS MODEL IS FOR G31 AT A SUPPLY PRESSURE OF 37mbar THESE APPLIANCES

More information

Sonnet Plus Anthem Genesis Soraya

Sonnet Plus Anthem Genesis Soraya 5110524/01 OWNER GUIDE Sonnet Plus Anthem Genesis Soraya Model 747 (GC No. 32-032-51) INSET LIVE FUEL EFFECT GAS FIRE THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) WHEN CONVERTED USING CONVERSION KIT

More information

OWNER GUIDE. Sunfire II Radiant. Radiant / Convector Gas Fire. Model 347 (G. C. Number )

OWNER GUIDE. Sunfire II Radiant. Radiant / Convector Gas Fire. Model 347 (G. C. Number ) 5110946/01 OWNER GUIDE Sunfire II Radiant Radiant / Convector Gas Fire Model 347 (G. C. Number 32-032-62) THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION

More information

Please leave these instructions with the user. Baxi Bermuda SL3. Fireside Gas Central Heating Unit. Installation and Servicing Instructions

Please leave these instructions with the user. Baxi Bermuda SL3. Fireside Gas Central Heating Unit. Installation and Servicing Instructions Please leave these instructions with the user Baxi Bermuda SL3 Fireside Gas Central Heating Unit Installation and Servicing Instructions Natural Gas Baxi Bermuda SL3 G.C.No. 37 077 60 For use with the

More information

COAL EFFECT BALANCED FLUE GAS FIRE

COAL EFFECT BALANCED FLUE GAS FIRE Raglan COAL EFFECT BALANCED FLUE GAS FIRE Installation and Maintenance Instructions Hand these instructions to the user Model No. KBFC**MN for use on Natural Gas (G20) at a supply pressure of 20 mbar in

More information

Baxi Brazilia F5, F5S & F8S

Baxi Brazilia F5, F5S & F8S Baxi Brazilia F5, F5S & F8S Balanced Flue Gas Wall Heaters Comp No. 243469 - Iss 1-6/99 Installation and Servicing Instructions Natural Gas Baxi Brazilia F 5 G.C.No. 35 075 0lA Baxi Brazilia F 5S Grey

More information

FIRECHARM LF ELECTRONIC

FIRECHARM LF ELECTRONIC 987618 Issue 5 FIRECHARM LF ELECTRONIC RADIANT/CONVECTOR GAS FIRE BRONZE (G.C. No. 32 689 32) BLACK (G.C. No. 32 689 33) Installation and Servicing Instructions THIS APPLIANCE IS FOR USE WITH NATURAL GAS

More information

INSTALLER GUIDE COALFLAME & LIMOUSIN. MODEL BR627 (GC No ) INSET LIVE FUEL EFFECT GAS FIRE

INSTALLER GUIDE COALFLAME & LIMOUSIN. MODEL BR627 (GC No ) INSET LIVE FUEL EFFECT GAS FIRE 600B607/05 INSTALLER GUIDE COALFLAME & LIMOUSIN MODEL BR627 (GC No. 32-032-22) INSET LIVE FUEL EFFECT GAS FIRE AS SUPPLIED, THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) WHEN CONVERTED USING VALOR CONVERSION

More information

Baxi Solaire Super Gas Fire Natural Gas Comp N o /95

Baxi Solaire Super Gas Fire Natural Gas Comp N o /95 Please leave these Instructions with the user. Baxi Solaire Super Gas Fire Natural Gas Comp N o 236216-10/95 Baxi Solaire Super - G.C.N o 32 077 36 Installation And Servicing Instructions Installation

More information

EMBERGLOW CLASSIC RADIANT CONVECTOR GAS FIRE. Installation and Maintenance Instructions

EMBERGLOW CLASSIC RADIANT CONVECTOR GAS FIRE. Installation and Maintenance Instructions , EMBERGLOW CLASSIC RADIANT CONVECTOR GAS FIRE Installation and Maintenance Instructions Hand these instructions to the user Model No. FEMC00MN is for use on Natural Gas (G20) at a supply pressure of 20

More information

CRYSTAL FIRES. Inset Conventional Flue Fire. (BOSTON/MIAMI) Cf1 and MANHATTAN USER INSTALLATION AND SERVICING INSTRUCTIONS

CRYSTAL FIRES. Inset Conventional Flue Fire. (BOSTON/MIAMI) Cf1 and MANHATTAN USER INSTALLATION AND SERVICING INSTRUCTIONS CRYSTAL FIRES (BOSTON/MIAMI) Cf1 and MANHATTAN Inset Conventional Flue Fire USER INSTALLATION AND SERVICING INSTRUCTIONS FOR USE WITH NATURAL GAS G20 @ 20 mbar For use in GB and IE CE THESE INSTRUCTIONS

More information

Emberglow COAL EFFECT BALANCED FLUE GAS FIRE

Emberglow COAL EFFECT BALANCED FLUE GAS FIRE Emberglow COAL EFFECT BALANCED FLUE GAS FIRE User Instructions These instructions should be read by the user before operating the appliance and retained for future reference Model No. FEBC00MN is only

More information

INSTALLER S GUIDE. MODEL 639 Open Decorative Gas Fire

INSTALLER S GUIDE. MODEL 639 Open Decorative Gas Fire 3002369/03 INSTALLER S GUIDE MODEL 639 Open Decorative Gas Fire (G.C No. 32-032-47) THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) WHEN CONVERTED USING CONVERSION KIT NO. 0591301 THIS APPLIANCE IS FOR

More information

Baxi Wentworth Classic Baxi Kingston 2 Classic

Baxi Wentworth Classic Baxi Kingston 2 Classic Baxi Wentworth Classic Baxi Kingston 2 Classic Please leave these instructions with the user Live Fuel Effect Inset Gas Fires Comp N o 244609 - Iss 4 6/00 Installation and Servicing Instructions Page 2

More information

Model BR660VA Heat Engine

Model BR660VA Heat Engine 5112253/01 Model BR660VA Heat Engine POWER FLUE INSET GAS FIRE (GC No. 32-032-44) THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20). WHEN CONVERTED USING CONVERSION KIT NO. 0591149 THIS APPLIANCE IS FOR

More information

KEY TO COMPONENTS. 1. Heat exchanger 2. Pilot gas pipe 3. Gas injector nozzle 4. Measuring point

KEY TO COMPONENTS. 1. Heat exchanger 2. Pilot gas pipe 3. Gas injector nozzle 4. Measuring point Bosch Thermotechnik WR 325 BF Gas Fired Multipoint Water Heater INSTALLATION AND SERVICING INSTRUCTIONS GC NUMBER 52 311 01 For your safety if you smell gas: 3. Do not operate any electrical switches 1.

More information

INSTALLATION & USERS INSTRUCTIONS. FOR USE WITH NATURAL GAS 20 mbar For use in GB and IE

INSTALLATION & USERS INSTRUCTIONS. FOR USE WITH NATURAL GAS 20 mbar For use in GB and IE 1 valentine s buildings Bechers drive Aintree racecourse Business Park L9 5ay CF1 L GAS APPLIANCE INSET CONVENTIONAL FLUED GAS FIRE INSTALLATION & USERS INSTRUCTIONS FOR USE WITH NATURAL GAS G20 @ 20 mbar

More information

Installation & Servicing Instructions. To be left with the user BBU 54/4. G.C. No For Use Only With Specially Designed Firefronts

Installation & Servicing Instructions. To be left with the user BBU 54/4. G.C. No For Use Only With Specially Designed Firefronts 2000225024C.07.02 Installation & Servicing Instructions To be left with the user BBU 54/4 G.C. No. 44-047 - 05 For Use Only With Specially Designed Firefronts 9701 This is a Cat I 2H Appliance One Contact

More information

JANUS 3 CIRCULATOR WATER HEATER INSTALLATION, COMMISSIONING & SERVICING INSTRUCTIONS G.C. No

JANUS 3 CIRCULATOR WATER HEATER INSTALLATION, COMMISSIONING & SERVICING INSTRUCTIONS G.C. No JANUS 3 CIRCULATOR WATER HEATER INSTALLATION, COMMISSIONING & SERVICING INSTRUCTIONS G.C. No 53 416 06 Publication No. ZZ 180/17 May 2000 These appliances are tested and certified by B G Technology for

More information

This appliance must be installed and serviced by a competent person as stipulated by the Gas Safety (Installation & Use) Regulations.

This appliance must be installed and serviced by a competent person as stipulated by the Gas Safety (Installation & Use) Regulations. G3512 and G3532 DOMINATORPLUS Grills INSTALLATION and SERVICING INSTRUCTIONS This appliance must be installed and serviced by a competent person as stipulated by the Gas Safety (Installation & Use) Regulations.

More information

GB IE INSTALLATION & USER INSTRUCTIONS. Model Number: V1/300/B (ez-slide control) HIGH EFFICIENCY INSET COAL EFFECT GAS CONVECTOR FIRE

GB IE INSTALLATION & USER INSTRUCTIONS. Model Number: V1/300/B (ez-slide control) HIGH EFFICIENCY INSET COAL EFFECT GAS CONVECTOR FIRE Model Number: V1/300/B (ez-slide control) HIGH EFFICIENCY INSET COAL EFFECT GAS CONVECTOR FIRE INSTALLATION & USER INSTRUCTIONS GB IE SUITABLE FOR USE ON NATURAL GAS (G20) AT 20mbar SUPPLY PRESSURE These

More information

Contact Details. Please note that some of the contact details on this PDF document may not be current.

Contact Details. Please note that some of the contact details on this PDF document may not be current. Contact Details Please note that some of the contact details on this PDF document may not be current. Please use the following details if you need to contact us: Telephone: 0844 879 3588 Email: customer.services@gdcgroup.co.uk

More information

Baxi Ebony Super Gas Fire Comp N o Issue 4 10/99

Baxi Ebony Super Gas Fire Comp N o Issue 4 10/99 Please leave these Instructions with the User Baxi Ebony Super Gas Fire Comp N o. 236202 - Issue 4 10/99 Baxi Ebony Super - G.C.N o 32 077 37 Installation and Servicing Instructions Installation Instructions

More information

Baxi Bermuda SP3/VP3. Fireside Gas Central Heating Unit Comp N o Iss 7-5/00. Installation and Servicing Instructions

Baxi Bermuda SP3/VP3. Fireside Gas Central Heating Unit Comp N o Iss 7-5/00. Installation and Servicing Instructions Baxi Bermuda SP3/VP3 Please leave these instructions with the User. Fireside Gas Central Heating Unit Comp N o 237568 - Iss 7-5/00 Installation and Servicing Instructions Natural Gas Propane Gas Renewal

More information

Model 341 Black Beauty Slimline

Model 341 Black Beauty Slimline 600B690/13 OWNER GUIDE Model 341 Black Beauty Slimline LIVE FUEL EFFECT GAS FIRE (GC No. 32-032-30) We trust that this guide gives sufficient details to enable this appliance to be operated and maintained

More information

INSTALLATION, USERS AND SERVICING INSTRUCTIONS

INSTALLATION, USERS AND SERVICING INSTRUCTIONS INSTALLATION, USERS AND SERVICING INSTRUCTIONS SLIMLINE (FAN FLUE) HOTBOX Inset Decorative coal or pebble effect Gas Fire For use with Natural Gas (G20) @ 20mbar or Butane (G30) @ 28mbar or Propane (G31)

More information

Please leave these instructions with the user. Baxi Bermuda RG 3. Fireside Gas Central Heating Unit. Installation and Servicing Instructions

Please leave these instructions with the user. Baxi Bermuda RG 3. Fireside Gas Central Heating Unit. Installation and Servicing Instructions Please leave these instructions with the user Baxi Bermuda RG 3 Fireside Gas Central Heating Unit Installation and Servicing Instructions Natural Gas Baxi Bermuda RG3 G.C.No 37 077 64 For use with the

More information

Orchestra COAL EFFECT BALANCED FLUE GAS FIRE

Orchestra COAL EFFECT BALANCED FLUE GAS FIRE Orchestra COAL EFFECT BALANCED FLUE GAS FIRE Installation and Maintenance Instructions Hand these instructions to the user Model No s FBFN76G & FBFN98G are for use on Natural Gas (G20) at a supply pressure

More information

INSTALLER S GUIDE. Model BG C-2. (GC No ) INSET LIVE FUEL EFFECT GAS FIRE. (Manufacturer ref. BR658VA)

INSTALLER S GUIDE. Model BG C-2. (GC No ) INSET LIVE FUEL EFFECT GAS FIRE. (Manufacturer ref. BR658VA) 600B743/03 INSTALLER S GUIDE Model BG C-2 (GC No. 32-032-37) INSET LIVE FUEL EFFECT GAS FIRE (Manufacturer ref. BR658VA) THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20) WHEN CONVERTED USING CONVERSION

More information

Model 347 BLACK BEAUTY

Model 347 BLACK BEAUTY 110945/03 OWNER GUIDE Model 347 BLACK BEAUTY RADIANT / CONVECTOR GAS FIRE (G. C. No. 32-032-62) We trust that this guide gives sufficient details to enable this appliance to be operated and maintained

More information

GB IE. VALOR BOLERO (MODEL BR626) Inset Decorative Fuel Effect Gas Fires. For

GB IE. VALOR BOLERO (MODEL BR626) Inset Decorative Fuel Effect Gas Fires. For O W N E R G U I D E For VALOR BOLERO (MODEL BR626) Inset Decorative Fuel Effect Gas Fires GB IE This Owner Guide is intended to help you care for your Valor gas fire. Please read carefully before using

More information

Black Beauty Unigas II

Black Beauty Unigas II I N S T A L L E R G U I D E MODEL 473 Room Sealed Radiant / Convector Gas Fire Black Beauty Unigas II Please keep in a safe place for future reference 2 600A742/02 Please leave this Installer Guide with

More information

Plus Model BR645 VA (G.C )

Plus Model BR645 VA (G.C ) 600B656/05 Plus Model BR645 VA (G.C. 32-032-34) As supplied, this appliance is for use with natural gas (G20) When converted using conversion kit no. 591149 this appliance is for use with propane gas (G31)

More information

Squirrel - Gas Stoves

Squirrel - Gas Stoves Squirrel - Gas Stoves Model No. 551 - With Open Flue INSTALLATION INSTRUCTIONS This appliance is for use with natural gas (G20) When converted using conversion kit no. 555111 this appliance is for use

More information

MODEL 326 Radiant / Convector Gas Fire Sun~Fire

MODEL 326 Radiant / Convector Gas Fire Sun~Fire O W N E R G U I D E MODEL 326 Radiant / Convector Gas Fire Sun~Fire This Owner Guide is intended to help you care for your Valor gas fire. Please read carefully before using your gas fire and keep for

More information

Model Apex Falcon, Titan & Zenit

Model Apex Falcon, Titan & Zenit Model Apex Falcon, Titan & Zenit Installation and User Instructions All instructions must be handed to user for safekeeping This is not a DIY product and must be installed by a Gas Safe registered installer

More information

CLASSIC II QUATTRO DECORATIVE FUEL EFFECT APPLIANCES FOR USE WITH NATURAL GAS IIN INSTALLATION, SERVICING & USER INSTRUCTIONS

CLASSIC II QUATTRO DECORATIVE FUEL EFFECT APPLIANCES FOR USE WITH NATURAL GAS IIN INSTALLATION, SERVICING & USER INSTRUCTIONS CLASSIC II QUATTRO DECORATIVE FUEL EFFECT APPLIANCES FOR USE WITH NATURAL GAS IIN INSTALLATION, SERVICING & USER INSTRUCTIONS THESE INSTRUCTIONS MUST BE LEFT WITH THE USER MANUFACTURED BY: MULTIGLOW FIRES

More information

Clarendon and Ashdon Log Effect Stove Range

Clarendon and Ashdon Log Effect Stove Range Clarendon and Ashdon Log Effect Stove Range Conventional Flue With upgradeable control valve Instructions for Use, Installation and Servicing For use in GB, IE (Great Britain and Eire) This appliance has

More information

Baxi Bermuda SP3/VP3. Installation and Servicing Instructions. Fireside Gas Central Heating Unit SP3 VP3

Baxi Bermuda SP3/VP3. Installation and Servicing Instructions. Fireside Gas Central Heating Unit SP3 VP3 Please leave these Instructions with the User. Baxi Bermuda SP3/VP3 Fireside Gas Central Heating Unit Installation and Servicing Instructions SP3 VP3 Natural Gas Baxi Bermuda SP3 G.C.No. 37 077 63 Baxi

More information

INSTALLER GUIDE MODEL BR417 VA. (G.C ) Inset Live Fuel Effect Gas Fire with Ultimate. Front

INSTALLER GUIDE MODEL BR417 VA. (G.C ) Inset Live Fuel Effect Gas Fire with Ultimate. Front 600B702/06 INSTALLER GUIDE MODEL BR417 VA (G.C.32-032-07) Inset Live Fuel Effect Gas Fire with Ultimate Front AS SUPPLIED, THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20). WHEN CONVERTED USING VALOR CONVERSION

More information

Dovre 280. Conventional Flue Log Effect Stove. With Upgradeable Control Valve. Instructions for Use, Installation and Servicing

Dovre 280. Conventional Flue Log Effect Stove. With Upgradeable Control Valve. Instructions for Use, Installation and Servicing Dovre 280 Conventional Flue Log Effect Stove With Upgradeable Control Valve Instructions for Use, Installation and Servicing For use in GB, IE (Great Britain and Republic of Ireland) IMPORTANT THE OUTER

More information

STRATA BATTERY IGNITION RADIANT CONVECTOR GAS FIRE

STRATA BATTERY IGNITION RADIANT CONVECTOR GAS FIRE STRATA BATTERY IGNITION RADIANT CONVECTOR GAS FIRE Installation, Maintenance & User Instructions Hand these instructions to the user Model No s FORS**EN are for use on Natural Gas (G20) at a supply pressure

More information

Model 741FS. Dream, Heritage or Opulent OWNER GUIDE. INSTALLER: Please leave this guide with the owner Baxi Heating U.K. Limited 2007.

Model 741FS. Dream, Heritage or Opulent OWNER GUIDE. INSTALLER: Please leave this guide with the owner Baxi Heating U.K. Limited 2007. 5112500/02 Model 741FS Inset live fuel effect gas fire Incorporating the BAXI FIRES DIVISION CONTROL Fitted with one of the following fascia. Dream, Heritage or Opulent (GC No. 32-032-56) We trust that

More information

Firefox 5. Model 910 CAST-IRON GAS STOVE. Fitted with a Ceramic Coal fuel effect. INSTALLER: Please leave this guide with the owner

Firefox 5. Model 910 CAST-IRON GAS STOVE. Fitted with a Ceramic Coal fuel effect. INSTALLER: Please leave this guide with the owner DATA LIBRARY Catalog» Valor» Stove» Firefox» Firefox 5 (GC No. 3226424)» Installation Instructions» Firefox 5 Model 910 iss 01 INSTALLER GUIDE Firefox 5 Model 910 CAST-IRON GAS STOVE Fitted with a Ceramic

More information

60BF G.C. No

60BF G.C. No 221791B.11.00 Instructions for Use Installation and Servicing To be left with the user 3790 60BF G.C. No. 41 319 54 Balanced Flue Boiler This is a Cat I 2H Appliance BS 6332 BS 5258 Reference in these

More information

Exmoor. Conventional Flue Log Effect Stove. With Upgradeable Control Valve. Instructions for Use, Installation and Servicing

Exmoor. Conventional Flue Log Effect Stove. With Upgradeable Control Valve. Instructions for Use, Installation and Servicing Exmoor Conventional Flue Log Effect Stove With Upgradeable Control Valve Instructions for Use, Installation and Servicing For use in GB, IE (Great Britain and Republic of Ireland) IMPORTANT THE OUTER CASING,

More information

Exmoor. Balanced Flue Log Effect Stove. With Upgradeable Control Valve. Instructions for Use, Installation and Servicing

Exmoor. Balanced Flue Log Effect Stove. With Upgradeable Control Valve. Instructions for Use, Installation and Servicing Exmoor Balanced Flue Log Effect Stove With Upgradeable Control Valve Instructions for Use, Installation and Servicing For use in GB, IE (Great Britain and Republic of Ireland) IMPORTANT THE OUTER CASING,

More information

INSTALLER GUIDE. Firefox 8. Model 944. CAST-IRON GAS STOVE Fitted with a Ceramic Coal fuel effect. (GC No )

INSTALLER GUIDE. Firefox 8. Model 944. CAST-IRON GAS STOVE Fitted with a Ceramic Coal fuel effect. (GC No ) 5130984/01 Firefox 8 Model 944 CAST-IRON GAS STOVE Fitted with a Ceramic Coal fuel effect. (GC No. 32-264-20) THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20). WHEN CONVERTED USING CONVERSION KIT NO. 0595261

More information

GrateGlow THE ALL NEW CAPITAL COLLECTION. G20 at 20mbar convertible to G31 at 37mbar. For use in GB and le. Users Instructions

GrateGlow THE ALL NEW CAPITAL COLLECTION. G20 at 20mbar convertible to G31 at 37mbar. For use in GB and le. Users Instructions GrateGlow A CARVER GROUP COMPANY --..--... THE GAS CONSUMERS' COUNCIL (GCC) IS AN INDEPENDENT ORGANISATION WHICH PROTECTS THE INTEREST OF GAS USERS. IF YOU NEED ADVICE, YOU WILL FIND THE TELEPHONE NUMBER

More information

5traxo INSTALLATION AND SERVICING INSTRUCTIONS MANDATORY REQUIREMENTS INSTALLATION

5traxo INSTALLATION AND SERVICING INSTRUCTIONS MANDATORY REQUIREMENTS INSTALLATION 5traxo Division of Legge Fabheat Ltd Longfield Road, Sydenham, Leamington Spa CV31 1XB Tel. (0926) 882233 Fax (0926) 450846 Registered in England No. 500091 Universal INSTALLATION AND SERVICING INSTRUCTIONS

More information

Classic DECORATIVE FUEL EFFECT GAS FIRE. Installation, Maintenance & User Instructions

Classic DECORATIVE FUEL EFFECT GAS FIRE. Installation, Maintenance & User Instructions Classic DECORATIVE FUEL EFFECT GAS FIRE Installation, Maintenance & User Instructions Hand these instructions to the user Model No s CSRC**MN is only for use on Natural Gas (G20) at a supply pressure of

More information

Kalahari DECORATIVE FUEL EFFECT GAS FIRE

Kalahari DECORATIVE FUEL EFFECT GAS FIRE Kalahari DECORATIVE FUEL EFFECT GAS FIRE User Instructions These instructions should be read by the user before operating the appliance and retained for future reference Model No. KRDC00MN & KRDC00SN are

More information

Clarendon & Ashdon. Conventional Flue Log Effect Stove Range. With Upgradeable Control Valve. Instructions for Use, Installation & Servicing

Clarendon & Ashdon. Conventional Flue Log Effect Stove Range. With Upgradeable Control Valve. Instructions for Use, Installation & Servicing Clarendon & Ashdon Conventional Flue Log Effect Stove Range With Upgradeable Control Valve Instructions for Use, Installation & Servicing For use in GB & IE (Great Britain & Republic of Ireland). IMPORTANT

More information

Conventional Flue Coal Effect Stove. With upgradeable control valve. Instructions for Use, Installation and Servicing

Conventional Flue Coal Effect Stove. With upgradeable control valve. Instructions for Use, Installation and Servicing Yeoman Exe Midi Conventional Flue Coal Effect Stove With upgradeable control valve Instructions for Use, Installation and Servicing For use in GB, IE (Great Britain and Eire) IMPORTANT This product contains

More information

WARNING This information is a copy of an original archive, therefore Aga cannot be held responsible for its continued accuracy.

WARNING This information is a copy of an original archive, therefore Aga cannot be held responsible for its continued accuracy. WARNING This information is a copy of an original archive, therefore Aga cannot be held responsible for its continued accuracy. REMBRANDT 18G/L GAS FIRE (for use with N.G. or L.P.G.) Owners Manual comprising

More information

Instructions for Use Installation and Servicing. To be left with the user

Instructions for Use Installation and Servicing. To be left with the user 2000225006B.03.02 Instructions for Use Installation and Servicing To be left with the user Hideaway 80C FF 9919 G.C. No. 41-047-41 Chimney Fanned Flue Boiler This is a Cat I 2H Appliance Reference in these

More information

INSTALLER GUIDE. Model 754. INSET LIVE FUEL EFFECT GAS FIRE Fitted with. Artura fascia. (GC No )

INSTALLER GUIDE. Model 754. INSET LIVE FUEL EFFECT GAS FIRE Fitted with. Artura fascia. (GC No ) 5113454/02 Model 754 INSET LIVE FUEL EFFECT GAS FIRE Fitted with Artura fascia (GC No. 32-032-59) THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20). THIS APPLIANCE IS SUITABLE ONLY FOR INSTALLATION IN THE

More information

Small Marlborough, Stockton & Steel Manhattan

Small Marlborough, Stockton & Steel Manhattan Small Marlborough, Stockton & Steel Manhattan Balanced Flue with Upgradeable Control Valve Small Marlborough Small Stockton Small Steel Manhattan Instructions for Use, Installation & Servicing For use

More information

INSTALLER AND OWNER GUIDE. For further advice please contact the retailer or company from where you purchased your stove

INSTALLER AND OWNER GUIDE. For further advice please contact the retailer or company from where you purchased your stove INSTALLER AND OWNER GUIDE 5138118/01 Vega 200 Gas Model 944 CAST-IRON GAS STOVE Fitted with a Ceramic Coal fuel effect. (GC No. 32-264-20) For further advice please contact the retailer or company from

More information

Installation & Operating Instructions For LPG Q5 Stoves IGNITE 5 GAS STOVE (CD1) HEREFORD 5 GAS STOVE (CD2) DESIRE 5 GAS STOVE (SD1) Manual Control

Installation & Operating Instructions For LPG Q5 Stoves IGNITE 5 GAS STOVE (CD1) HEREFORD 5 GAS STOVE (CD2) DESIRE 5 GAS STOVE (SD1) Manual Control Installation & Operating Instructions For LPG Q5 Stoves IGNITE 5 GAS STOVE (CD1) HEREFORD 5 GAS STOVE (CD2) DESIRE 5 GAS STOVE (SD1) Manual Control Conventional, Top or Rear Flue, LPG Gas Stove PLEASE

More information

THE INSTRUCTIONS IN THIS MANUAL APPLY TO KENT GAS FIRES. CONTENTS:-

THE INSTRUCTIONS IN THIS MANUAL APPLY TO KENT GAS FIRES. CONTENTS:- THE INSTRUCTIONS IN THIS MANUAL APPLY TO KENT GAS FIRES. THE MODELS COVERED ARE:- For use with Natural Gas:- KENT ESTATE NG, KENT ULTIMA NG For use with Liquid Propane Gas (LPG):- KENT ESTATE LP, KENT

More information

These Appliances must be installed and serviced by a competent person as stipulated by the Gas Safety (Installation & Use) Regulations.

These Appliances must be installed and serviced by a competent person as stipulated by the Gas Safety (Installation & Use) Regulations. G350/11 and 12 FREESTANDING FRYERS INSTALLATION and SERVICING INSTRUCTIONS These Appliances must be installed and serviced by a competent person as stipulated by the Gas Safety (Installation & Use) Regulations.

More information

Steel Manhattan Coal Effect Stove Range

Steel Manhattan Coal Effect Stove Range Steel Manhattan Coal Effect Stove Range Conventional Flue With upgradeable control valve Instructions for Use, Installation and Servicing For use in GB, IE (Great Britain and Eire) IMPORTANT This product

More information

HAWK GAS STOVE. Installation and Servicing Instructions

HAWK GAS STOVE. Installation and Servicing Instructions HAWK GAS STOVE Installation and Servicing Instructions Please leave this instruction booklet with the user after the installation is complete. Leave the system ready for operation and instruct the user

More information

ATMOSPHERIC GAS BOILER INSTALLATION, OPERATING AND MAINTENANCE MANUAL

ATMOSPHERIC GAS BOILER INSTALLATION, OPERATING AND MAINTENANCE MANUAL STREBEL GENEVA CE ATMOSPHERIC GAS BOILER INSTALLATION, OPERATING AND MAINTENANCE MANUAL INDEX TABLE 1 TECHNICAL DATA SECTION 1 SECTION 2 SECTION 3 SECTION 4 SECTION 5 SECTION 6 SECTION 7 SECTION 8 SECTION

More information

Baxi Maxflow Combi FS

Baxi Maxflow Combi FS Baxi Maxflow Combi FS Gas Fired Floor Standing Combination Boiler with Unvented Hot Water Storage Please keep these instructions safe. Should you move house, please hand them over to the next occupier.

More information

Installation & Servicing Instructions

Installation & Servicing Instructions 220683B.11.96 Installation & Servicing Instructions To be left with the user 70FF 80FF GC 41 319 86 GC 41 319 60 Fanned Flue Boiler 4098 This is a Cat I 2H Appliance BS 6332 BS 5258 Reference in these

More information

Baxi Bahama 100. Gas Fired Wall Mounted Combination Boiler. User s Operating Instructions

Baxi Bahama 100. Gas Fired Wall Mounted Combination Boiler. User s Operating Instructions Baxi Bahama 100 Please keep these instructions safe. Should you move house, please hand them over to the next occupier. Gas Fired Wall Mounted Combination Boiler User s Operating Instructions Natural Gas

More information

TC MODULE (FFD) (with Gas Hob)

TC MODULE (FFD) (with Gas Hob) TC MODULE (FFD) (with Gas Hob) Installation Instructions REMEMBER: when replacing a part on this appliance, use only spare parts that you can be assured conform to the safety and performance specification

More information

Baxi Maxflow Combi WM

Baxi Maxflow Combi WM Baxi Maxflow Combi WM Gas Fired Wall Mounted Combination Boiler with Unvented Hot Water Storage Please keep these instructions safe. Should you move house, please hand them over to the next occupier. User

More information

Baxi Wentworth Deluxe Baxi Kingston 2 Deluxe

Baxi Wentworth Deluxe Baxi Kingston 2 Deluxe Baxi Wentworth Deluxe Baxi Kingston 2 Deluxe Please leave these instructions with the user Live Fuel Effect Inset Gas Fires Comp N o 244621 - Iss 5 6/00 Installation and Servicing Instructions Page 2 Natural

More information

Dovre 280. Conventional Flue Coal Effect Stove. With Upgradeable Control Valve. Instructions for Use, Installation and Servicing

Dovre 280. Conventional Flue Coal Effect Stove. With Upgradeable Control Valve. Instructions for Use, Installation and Servicing Dovre 280 Conventional Flue Coal Effect Stove With Upgradeable Control Valve Instructions for Use, Installation and Servicing For use in GB, IE (Great Britain and Republic of Ireland) IMPORTANT THE OUTER

More information

THIS PRODUCT IS APPROVED TO THE EUROPEAN GAS APPLIANCE DIRECTIVE

THIS PRODUCT IS APPROVED TO THE EUROPEAN GAS APPLIANCE DIRECTIVE Solar Crown and Cast Inset Fires Installation Instructions THIS APPLIANCE MUST BE INSTALLED/SERVICED BY A COMPETENT PERSON IN ACCORDANCE WITH ALL THE REGULATIONS IN FORCE THIS PRODUCT IS APPROVED TO THE

More information

Osprey 2 CFL

Osprey 2 CFL Osprey 2 CFL 125-150 - 180-220 Gas Fired Floor Standing Boiler Installation and Servicing Instructions Please leave these instructions with the user Natural Gas Potterton Osprey 2 CFL 125 G.C.N o 41 590

More information

GLOBAL 40 CF FITTING INTO A CONVENTIONAL CLASS 1 CHIMNEY

GLOBAL 40 CF FITTING INTO A CONVENTIONAL CLASS 1 CHIMNEY INSTALLATION INSTRUCTIONS GB/IE GLOBAL 40 CF FITTING INTO A CONVENTIONAL CLASS 1 CHIMNEY DRU VERWARMING B.V. HOLLAND 957.669.00 CONTENTS Site: 3 Important 3 Foreword 4 Instructions for installation 4 Ventilation

More information