SEATING THE OFFICE CHAIR ONE OF THE MOST IMPORTANT COMPONENTS OF A PROPER WORKSTATION IS THE OFFICE CHAIR! 1405 & 1410 PREMIUM SERIES CHAIRS

Transcription

1 OFFICE Seating & Tables Computer Supplies Safes & Key Cabinets , Filing & Storage Systems Office, Task Lights & Magnifiers General Office Supplies Cafeteria Supplies, Water Coolers & HVAC

2 THE OFFICE CHAIR ONE OF THE MOST IMPORTANT COMPONENTS OF A PROPER WORKSTATION IS THE OFFICE CHAIR! The type of work being performed in the office often dictates what kind of chair is required. The size of the person doing the work might also affect the proper choice. This guideline is intended for most users, but accomodating the extremes in a person's height, weight, physical disability, etc., is a fact of life and must be part of the planning process. SEATING The chair should have a seat back with lumbar support capable of both up-and-down and front-and-back adjustment. The seat back should provide support to both the lower back and the shoulders and enable the person to sit comfortably upright without slouching To accomodate the height of the user, the chair height with respect to the floor should be adjustable The seat pan should be capable of tilting and it should have a contoured or waterfall front Hip angle: Knee angle: Ankle angle: The front edge of the seat should curve away and down from the back of the person's legs to promote circulation in the lower legs. Tilting transfers weight from your hips to your legs, encouraging normal back curve and reducing pressure on the discs in the lower spine The seat pan and backrest should be upholstered and cloth covered with a fabric that is breathable. Seat padding should not compress more than one inch when an individual is seated The height of the armrests needs to be adjustable with respect to the seat pan. Adjustable height arm rests relieve tension in the upper back, neck, and shoulders, by allowing the user's arms and wrists to be in parallel position. They also provide resting planes To accomodate the breadth of the user's lower torso, the office chair armrests should be capable of in and out adjustment and that adjustment needs to be independent of the seat pan The chair should be capable of swiveling at least 360 To prevent the possibility of tipping, the chair should have five casters. The type of casters depends on the flooring material. Use hard casters for carpeted floors. Use soft casters for hard wood vinyl or when used on chair mats Look for chairs with a built-in tilt tension mechanism that controls the rate and ease with which the chair reclines to different weights and strengths of the user. This allows the user freedom to rock/shift in the chair, while not disturbing the original ergonomic settings 1405 & 1410 PREMIUM SERIES CHAIRS Offers all you require in a task and operator chair. From molded foam cushions to "one touch" ergonomic chair controls. Gas lift height adjustment Onyx Back height and depth adjustment Seat and back angle adjustment on 1410 Series Optional arms and stool kit available Dual wheel carpet casters Charcoal OE744 OE748 w/option OC323 No. Seat Dimensions Back Dimensions Onyx Charcoal Description W" x D" x H" W" x H" /Each OE744 OE Series chair 17 1/2 x 18 x /2 16 1/4 x OE746 OE Series w/stool kit 17 1/2 x 18 x /4 x OE748 OE Series multi functional 17 1/2 x 18 1/2 x /4 17 1/2 x TASK CHAIRS & ECONOMICAL STENO CHAIRS Pneumatic height adjustments Backrest height adjustments Five prong poly on steel base Dual wheel carpet casters Stool kit available Optional arms Optional glides (recommended with stool kit) No. Seat Dimensions Back Dimensions Wt. Onyx Charcoal Description W" x D" x H" W" x H" lbs. /Each ECONOMICAL STENO CHAIRS OC310 OC309 w/o arms 18 x 17 x /2 x 11 1/ OC312 OC311 w/t-arms 18 x 17 x /2 x 11 1/ OE093 OE092 w/stool kit 18 x 17 x /2 x 11 1/ TASK CHAIRS OE095 OE094 w/stool kit 18 x 17 x /2 x 13 1/ OPTIONS FOR CHAIRS Onyx Charcoal OC311 with stool kit (OA269) OE095 R33113E No. OA271 /Each $74.18 Loop Arm Kit (width adjustable) No. OC323 /Each $92.96 T-Arm Kit (width & height adjustable) No. OA269 /Each $64.36 Stool Kit No. OC822 /Each $ Chrome Foot Ring OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1589

3 SEATING UBER BIG & TALL CHAIRS Designed especially for the big and tall person 500-lb. capacity 360 swivel seat with pneumatic height adjustment Tilt lock and tilt tension on a 5-star, over-sized base Dual hooded 2" diameter casters for added stability Seat dimensions: 22 1/4" W x 20 3/4" D No tools required for assembly (except for the optional arms OJ995) No. Back Dimensions Black Grey Description Seat height" W" x H" /Each OJ990 OJ991 High back 19 1/2 23 1/2 23 x OJ992 OJ993 Mid back 18 1/2 22 1/2 23 x REPLACEMENT PNEUMATIC CYLINDER FOR SHORTER SEAT HEIGHT OJ994 Reduces overall seat height to 17-21" OPTIONAL ARMS OJ995 T-Pad, set of 2, black PREMIUM SERIES MULTI-FUNCTION OPERATOR CHAIRS New concept fabric design Heavy-duty multi-tilt mechanism with tension adjustable infinite lock tilt Forward tilt with lockout option Independent back angle adjustment Ratchet backrest height adjustment Heavy-duty steel base with plastic cover Injection molded foam cushions Dual wheel carpet casters Pneumatic gas lift height adjustment: 18"- 23" Seat dimensions: 18" W x 18" D x 18-23" H Back dimensions: 17" W x 21" H No. Grey Black Burgundy Blue Description /Each OF194 OF195 OF193 OF192 Operator chair OF190 OF191 OF189 OF188 Operator chair w/t-arms OF182 OF183 OF181 OF180 Operator chair w/loop-arms OJ990 shown w/oj995 w/adjustable T-arms Standard OJ993 w/loop arms SUPPORTECH ERGONOMIC CHAIRS Multi-tilt control for custom adjustment Gas lift height adjustment Tension adjustable swivel/ tilt with locking free float Height adjustable contoured backrest Height adjustable armrests Five prong plastic (glass reinforced) base Dual wheel carpet casters Seat dimensions: 20" W x 18 1/2" D x 19-24" H Back dimensions: 19" W x 21" H ACTIV SERIES A-95 MESH CHAIRS Flexibly adjusts to support your back as you move in your seat while working Allows airflow to your back to keep you cool and comfortable Feels soft and comfortable, not rigid, against your back Mesh contoured shaped back Black fabric on seat Pneumatic seat height adjustment between 18 1/2" and 21 1/2" Back is 19" high and 18 3/4" wide Seat is 20" wide and 20" deep Fixed armrests Tilt feature with lockout Tension adjustment Chrome base and gas cylinder Carpet casters No. OK210 /Each ACTIV SERIES LEATHER MANAGER'S CHAIRS Thick padded and contoured seat and back for superior comfort Seat is 19 1/2" width and 20" depth Back is 26" height and 20" width Back features built-in lumbar support which allows increased relaxation of the back Contoured armrests for increased support Pneumatic seat height adjustment from 18" to 22" A tilt mechanism with lockout and tension adjustment control knob Contoured backrest shaped to fit the contours of the body Soft-touch leather like fabric Fixed armrests No. OK390 /Each Onyx No. Onyx Charcoal` /Each OC359 OC LEATHER CHAIRS High back tilter with pneumatic seat height adjustment from 16" to 20" Upright position tilt lock with tension control knob Dual wheel carpet casters for easy movement on carpet Black leather seat with mock leather back and trim Ideal for home or office Dimensions: 25 1/2" W x 28" D x 43" H No. OK049 /Each $ Charcoal MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & ACTIV SERIES MID-BACK MESH-CHAIRS Tilt mechanism with lockout feature and tension adjustment Height and depth adjustable lumbar support between 18 1/4" to 21 1/2" Optional height and tilt adjustable headrest Back is 23" height and 20" width Seat is 20" width and 19 1/2" depth Height and width adjustable armrests Fabric options on seat and optional headrest Soft touch mesh on seat as standard fabric Black base and gas cylinder METALWORKING EQUIPMENT OK208 Mid Back Mesh-Chair ON573 Head rest SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE R33114E

4 STEEL BASE SWIVEL STOOLS 5" pneumatic lift of 25" to 30", for easy height adjustment Five legs and an all-welded steel base, gives optimum stability 16-gauge, 1" diameter steel legs Full 360 rotation Colour: Powder coated black Santex Optional casters are available OJ973 OJ974 OJ975 Wt. No. Upholstery seat Dimensions" lbs. /Each OJ973 Vinyl & Foam-Padded 19 x Seat & Back OJ974 Polyurethane Seat & Back 18 x OJ975 Premium Self Skinned 19 x Polyurethane Seat & Back OJ976 Optional Set of 5 Tile Casters (Includes Leg Insert Socket) INDUSTRIAL SEATING Features a full 8" of pneumatic lift while seated Exclusive extension tube provides an adjustable height range of 17" to 35" Seats and backs are microcellular self skinning polyurethane foam which inhibits punctures, tears and moisture absorption Large 26" dia. five leg steel base with 2 1/2" diameter glides ensure stability and safety even at the highest levels Large wide angle footrests make it easy to step up into seat FC680 Features 22 back angle and 10 seat tilt adjustment w/double paddle handles. FC681 Features 3" back rest height and 3" back rest depth adjustment. Assembly required. DELUXE SWIVEL STOOLS These padded stools will provide workers with maximum comfort and support 360 swivel motion is ideal for workers who have repetitive side to side movement Seat easily adjusts to your selected height, just raise or lower the steel rod and lock securely in place 2" foam over a 1/2" plywood base and 1/2" foamed backrest All-welded frame constructed of 1" diameter 16-gauge steel 3/4" circular tube footrest Four leg cluster design has a 22" spread giving them optimum stability Black vinyl upholstery with a royal grey frame Optional casters available OJ905 has an ergonomic self-skinned molded polyurethane foam seat and back, features lumber support, waterfall seat and 4-leg frame for superior comfort and durability. Adjustable Seat Wt. No. Height" Dimensions" lbs. /Each OJ x FC x FC675 Set of 4 casters SWIVEL STOOLS Seats made of 19-gauge embossed steel with 1/8" tempered hardboard inlay 1" diameter, 16-gauge steel frame all-welded tubing Circular 18-gauge footrest guarantees comfort and stability Heavy-duty rubber cushioned steel glides protect floors 1" x 14 1/2" long steel adjustment stem for easy height selection on all units 9 1/2" x 15 3/4" backrest is 4-way adjustable Optional casters available: FC675 s FC673 and FC674 come with a padded seat FC661 FC670 SEATING FC665 OJ905 R33115E HOW WAVE TUBE TECHNOLOGY WORKS Lift out Step 1 Step 2 Step 3 Open Tapered Collet Drop into base Adjusts to any position up to 10'' Dimensions" No. of No. Seat" Backrest" Footrests /Each FC /2 x /4 x FC /4 x 16 1/4 14 1/2 x FC658 FC673 Adjustable Seat Wt. No. Height" Dimensions" lbs. /Each FC FC FC /2 x FC FC FC675 Set of 4 casters POLYURETHANE SWIVEL STOOLS 360º swivel Constructed of 1" diameter 16-gauge tubular steel base 17" x 16 1/2" sturdy polyurethane seat OA241 comes with a 4-leg base and manual height control from 22" to 28" simply raise or lower the steel rod and lock securely into place ON563/ON564 comes with a 5-leg glass reinforced nylon base and nylon foot ring ON563/ON564 features pneumatic height control from 21" to 28" OA241 4-leg base with glides ON564 ON563 5-leg base with glides ON564 5-leg base with casters OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1591

5 SEATING STATIONARY & ADJUSTABLE HEIGHT STOOLS Ruggedly built for long lasting service in a warehouse factory or office All-welded frame is a 7/8" dia. steel tube Legs are braced with a 3/4" 18-gauge circular footrest for increased strength and stability 14" diameter embossed steel seat has a 1/8" tempered hardboard inlay FC656 has a 14 1/2" x 15" sq. seat and is reinforced by steel bars All stools have four chrome floor glides that won't damage floors On the adjustable models the telescopic legs have screw locks that adjust on 1" increments Contoured back rest constructed of 19-gauge steel Colour: Royal grey OK067 is a premium shop stool which is chrome-painted A. STATIONARY HEIGHT B. D. Seat Wt. No. Height" Dim." lbs. /Each A. FC B. FC B. FC C. OK /2 13 1/ C. E. ADJUSTABLE HEIGHT Seat Wt. No. Height" Dim." lbs. /Each D. FC E. FC F. FC /2 x F. POLYURETHANE SEAT STOOLS Maximum comfort, durable economical stools with selfskinned polyurethane padded seat Easy to maintain in any environment 14" dia. seats mount to stationary, adjustable or swivel stools of various heights for your convenience Sit/stand seat options (OG389, OG390) offer an ergonomic molded polyurethane seat, mounted on a sturdy 4-leg steel base OG385 OG387 OG389 Adjustable Seat No. Description Height" Dimensions" /Each OG385 Fixed Seat /2 x 1 1/ OG386 Fixed Seat /2 x 1 1/ OG387 Swivel Seat /2 x 1 1/ OG388 Swivel Seat /2 x 1 1/ OG389 Shaped Sit/Stand Seat x 9 x OG390 Shaped Sit/Stand Seat x 9 x ECONOMY DRAFTING CHAIRS Pneumatic seat height control adjust from 23" to 33" Manual back height and depth adjustment Chrome-plated adjustable footring Five star nylon-reinforce base for strength and durability Back dimensions: 16" W x 9 1/2" H Seat dimensions: 18 3/4" W x 16 5/8" D Wt. No. Colour lbs. /Each OE096 Black STENO CHAIRS A heavy-duty industrial chair at an economical price Comfortable 2 1/2" foam-upholstered seat with a full 360 rotation Padded backrest with a floating spring action back hinge Standard black vinyl upholstery A five prong base for increased stability Height adjustment from 17" to 22" Included: Five swivel black nylon, twin wheel casters No. Colour /Each OA276 Black DRAFTING STOOLS Designed with a contoured seat and back 3-way back adjustment provides user comfort Seat and back are made with a solid 3/4" plywood frame and fastened together with T-nuts Standard 100% polypropylene black fabric upholstery One piece durable plastic base with nylon footrest Two pneumatic gas levers simplifies height adjustment from 24 1/2" to 30" and ergonomic tilt With casters No. Colour /Each OA286 Black MID BACK DRAFTING/TASK CHAIRS Contoured foam seat 20" x 18 1/2" Back dimensions 18" x 19" with integral ergo support Standard 100% polypropylene black fabric upholstery 5-leg glass reinforced nylon base Height adjustment 16"-22" Multi function type seat mechanism T-arms No. ON565 Each R33116E 1592 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

6 ERGONOMIC INDUSTRIAL SHOP SEATING Industrial chairs featuring comfortable and supportive seating that is easy to clean Seats made of a soft molded polyurethane material, backs formed to support the body for greater comfort and less fatigue Pneumatic height adjustment of 15" to 20 1/2" Adjustable back rest 5-prong poly on steel base with dual wheel carpet casters Optional chrome foot ring adds 10" to height Glides recommended with foot ring OC816 and OC821 task chairs have adjustable backrest height, depth and angle Optional stool kit model OC822 Wt. No. Description lbs. /Each W/CASTERS OC815 Operator's Chair OC816 Task Chair NH450 Operator's Chair w/stool kit NH451 Task Chair w/stool kit W/GLIDES OC820 Operator's Chair OC821 Task Chair NH452 Operator's Chair w/stool kit NH453 Task Chair w/stool kit SHOPTECH ERGONOMIC INDUSTRIAL STOOLS Industrial seating that brings ergonomic comfort and productivity to the shop floor, the laboratory or the shipping office Durable, easy-to-clean, molded polyurethane seating is the perfect solution for clean rooms or wipe down applications Overall height of 16" to 21" with a 19" wide by 14" deep seat OC815 OE088 OC816 ERGONOMIC SEATING Designed for the industrial work place, food industry, or any application Provides workers with dynamic seating necessary for the maintenance of health and productivity Ergo stool offers a black self-skinned integral molded polyurethane foam seat and back for durability and ease of maintenance Stool features proper lumbar support, swivel and water-fall seat and three pneumatic height adjustments Adjustable No. Description Height" /Each 2" SWIVEL CARPET CASTERS FC677 No footring FC678 Footring FC679 Footring W/GLIDES OD513 No footring OD514 Footring OD515 Footring SEATING OD515 FC677 SIT/STAND STOOLS Sit/stand stools dramatically reduce fatigue for workers unable to sit down on the job Can be positioned for up close work FC683 heavy gauge triangular glides provide safety, features a built-in footrest, a 15" wide x 13 7/8" high self skinning polyurethane seat mounted to an adjustable spring suspension frame that automatically tilts forward up to 15 while in use Removable seat attaches to frame with a double pin locking system which easily adjusts to 12 positions from 21" to 35" FC685 features a sturdy, tip proof 5-leg base with a padded comfortable "Bicycle style" seat Pneumatic height adjustment from 23 1/2" to 33 1/2" Wt. No. Description lbs. /Each OE088 Stool R33117E ELECTROSTATIC DISCHARGE (ESD) LOW BACK TASK CHAIR STOOLS 10" pneumatic seat height adjustment (20" to 30") with a contoured, black polyurethane seat and back Articulating hinged back provides support Seat depth adjustment enables proper back to front seat support Footing, back upright and cylinder are chromed to provide a clean environment Ideal for electronic labs or defence industries who require furniture designed to direct static electricity away from delicate equipment, components, or chemicals Dimensions: 18" W x 20 1/2" D x 42" H No. OK046 /Each $ HEAVY-DUTY STEEL STEP STOOLS Comes with a double platform with non-slip rubber tread Spring-loaded casters retract under slight pressure, forcing base to the floor 11" diameter upper platform and 13 1/2" diameter lower platform 17 1/4" diameter base has an all-around protective bumper 16 1/2" overall height Wt. 10 lbs. Colour: Black No. ON528 /Each $99.85 STEP STOOLS Tough one piece poly construction with anti-skid bottom Threaded top and expanded step 16" diameter base provides added stability Glides easily on retractable rubber casters 13" overall height Capacity: 300 lbs. Weight: 7 lbs. No. Colour /Each OA299 Black OA300 Beige FC685 FC683 FC683 Manual Adjustment FC685 Pneumatic Adjustment FOLDABLE STEP STOOLS Slip-resistant surfaces on steps and foot pads Stands upright when folded and requires minimum space for storage Easy to clean and resistant to dents and rust Capacity: 300 lbs. No. MH866 /Each $58.81 OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1593

7 SEATING SPECIALTY STOOLS Designed specifically for laboratories and medical offices Available with 14" diameter, 3" high vinyl or fabric covered seat Pneumatic mechanism to adjust the height Full foot ring is standard on stools except for models OC785, OC791 and OC788 Optional footring for these models: OC819 Optional casters or glides available OC819 optional foot ring $49.19 OC790 OC786 No. Vinyl CASTERS OC785 OC786 OC787 Fabric Adjustable Height" Wt. lbs. /Each OC791 OC792 OC No. Vinyl Fabric GLIDES OC788 OC789 OC790 OC796 Adjustable Height" Wt. lbs. /Each PNEUMATIC SWIVEL STOOLS SCOOTER STOOLS 5" gas lift Height adjustable from 18" to 23" Black select fabric Weight: 10 lbs. No. OD846 /Each $ All-steel construction and soft rubber casters with ball bearing movement allow the Scooter stool to give rugged and versatile service Tray shelf for tools or papers Capacity: 300 lbs. Shipped knocked down Ten-year warranty 10" gas lift Height adjustable from 23" to 33" Options ST-03 footring (OC822) Weight: 12 lbs. No. OD847 /Each $ No. OE848 Fixed at a comfortable 8 angle to relieve muscle strain Removable 14-gauge platform has nine elevation positions which lock into place with a double locking pin Black powder coat paint finish and textured anti-slip covering on the platform Dimensions: 20" W x 13" D x 21" H No. FC684 /Each $ Oversized 17" polyurethane seat 5" pneumatic lift of 25" to 30" for easy height adjustment Five legs, all-welded steel base, gives optimum stability 16-gauge 1" diameter steel legs Full 360º rotation Colour: Powder coated black Santex Optional casters are available SET OF 5 OPTIONAL TILE CASTERS SAFETY EQUIPMENT & /Each METALWORKING Call us for quantity pricing! EQUIPMENT SHIPPING & PACKAGING R33118E Description Quilt Fabric, Black No Pattern, Ebony Luxhide Bonded Leather, Black _Eng.indd 1594 /Each No. OJ976 /Each $40.15 ON570 JANITORIAL & MAINTENANCE Wt. Lbs. 10 SWIVEL STOOLS Fully upholstered cushions Waterfall seat edge reduces pressure at the back of your knees contributing to good blood flow Contoured cushions support the body effectively allowing you to sit longer without discomfort Dimensions: 22" W x 23" D x 35 1/2" H Shipped fully assembled MATERIAL HANDLING & Height" 14 1/2 No. ON566 /Each $ HARVEST WOOD FRAME GUEST CHAIRS 1594 Seat Dia." 13 SWIVEL STOOLS WITH OVERSIZED POLYURETHANE SEAT FOOTRESTS No. ON568 ON569 ON570 Tray Dia." 15 INSTRUMENTS, SCALES & OFFICE :34 AM

8 STACKING CHAIRS BIRCH PLYWOOD Assembled to a beige enamel steel frame Seat and back are 1/4" thick overall Most economical chair available No. OA282 /Each $60.25 OA282 HORIZON CHAIRS Incredibly strong and durable thermoplastic shell which assures correct posture and provides maximum comfort for sustained periods of sitting Arched back with sculptured cut-out provides excellent ventilation Heavy-duty welded, unitized chassis designed to enable stacking yet avoids protruding legs Legs made of 16-gauge tubular steel Heavy 14-gauge channel cross braces provide anchor points for the shell Frame is black Seat height: 18" SEATING POLYPROPYLENE Weighs only seven pounds and is surprisingly strong 7/8" tubular steel frame is in the shape of an X under the seat giving rigidity and strength to the unit Moulded polypropylene seat and back with a texture finish Glides are insert type and will not mark floors Will stack with all plywood stacking chairs 18" seat height OD919 OD920 Frame Back & Seat No. Colour Colour /Each OD919 Beige Navy OD920 Beige Grey No. Colour /Each OD925 Blue OD929 Grey OD933 Black OD937 Green ARMLESS STACKING CHAIRS Durable polypropylene shell with a pebbled finish on 3/4" chromed frame Stacks up to 8 high for compact storage Ultra light and stain resistant For use in cafeteria, warehouse or community halls R33119E UPHOLSTERED Stacks up to 10 high for compact storage One piece, chromed tube side frame with vinyl-upholstered seat and back Standard glide is a durable black polypropylene angled foot Ideal for reception seating, cafeteria, or community halls ARMLESS OJ970 No. Black Midnight Blue /Each OJ970 OK WITH ARMS NESTING CHAIRS WITH CASTERS Waterfall seat edge reduces pressure at the back of your knees contributing to good blood flow Welded steel frame Black polypropylene seat and back Hinged flip-up seat Nest horizontally 23 1/2" W x 23" D X 33.4" H Durable tungsten paint finish Two chairs per package No. ON571 /Each $ OK024 No. Black Midnight Blue /Each OK024 OK No. Black Grey Royal /Each OK032 OK033 OK MAXX STAXX TM - STACKABLE CHAIRS Ideal for lunch rooms, training rooms, seminars or as guest seating Sturdy, elliptical steel frame Durable nylon armrests Non-marking nylon floor glides Polypropylene seat and backrest Replaceable seat and backrest components Polypropylene seat bottom shell (protects chair surfaces when stacking) Black heavy-duty GRF nylon base Back is 13 1/2" high and 16 1/2" wide Seat 17" wide x 15 1/2" deep OK391 MaxX Armless OK392 MaxX Armchair OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1595 OK391 OK035 OK392

9 SEATING & TABLES FOLDING CHAIRS Double-reinforced steel at all four pivot points and cross braces Legs have slip-resistant, colour-matched polyethylene end caps Sturdy construction withstands wear-and-tear of frequent use Seat size is 16 3/4" x 16 1/4" Light beige No. OK070 /Each $44.54 HANGING CHAIR CADDIES Space-saving solution, ideal in applications where space is limited Holds up to 84 chairs Portable, easy mobility with 4" swivel casters Overall dimensions: 64 1/2" L x 33 1/2" W x 70 1/4" H No. OK072 /Each $ LITE-LIFT FOLDING CHAIRS Durable molded seat and back Steel folding legs are finished in a scuff resistant textured charcoal epoxy coating Dimensions: 18.5" W x 22.5" D x 34.24"H Set of 4 chairs Oyster Grey finish No OK361 /Set $ RACETRACK CONFERENCE ROOM TABLES Features superior laminate and construction, contemporary style, and a strong and durable 3 mm PVC "Super Edge" Available in 8' or 10' Slab base 8' table, top is standard one piece 10' table, top is standard two pieces Cherry finish PRECISION DRAFTING TABLES Durable drafting table features a heavy gauge steel base and a 4 post design with stabilizing bars on the bottom for maximum stability. Table includes a 12 1/2" W x 29 3/4" D tool drawer with lock and a 38 1/8" W x 28 3/4" D reference drawer under the board. Boards are available in 60" or 72" sizes and have a non-glare green surface. Angle of board is easily adjustable for a comfortable working position on any project. Grey enamel finish on base. Base measures 35 1/2" H. Dimensions No. W" D" H" /Each OK x 44 x ON x 48 x ROUND CONFERENCE ROOM TABLES Constructed of thermally fused laminate Features X-style base Dimensions: 42" Dia. x 29" H Cherry finish No. OK355 /Each $ Shown with base which is sold separately Dimensions Wt. No. Description W" x D" x H" lbs. /Each OA914 Small Board 60 x 37 1/2 x OA909 Large Board 72 x 37 1/2 x OA912 4 Post Base 56 3/8 x 30 1/ R33413E 1596 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

10 TABLES CAFETERIA TABLES 1 1/8" thermally fused walnut finish laminate Self-edged top with a black metal skirt Chromed legs have adjustable feet glides Ideal for cafeteria or work table FOLDING TABLES 5/8" thick tops Durable walnut colour plastic laminate finish Folding legs and perimeter metal frame constructed of 16-gauge brown enamel steel Table height: 29" OA304 Top Size No. L" x W" /Each OK x OK x OK x OK x OK x OK050 Top Size No. L" x W" /Each OA x OA x OA304 60" Diameter OA948 GLOBAL TM FOLDING TABLES Made of 5/8" particleboard with protective plastic corners except OK055 which is made of 3/4" plywood core Walnut top with brown Vinyl T-Mould edging Heavy duty brown metal legs with safety locking mechanism Height: 29" EDGE STACKING CADDIES For rectangular or round tables Ideal for tables of all widths especially wider than 30" that must fit through a narrow doorway 14-gauge steel tubing with a black finish Shipping weight: 65 lbs. Top Size No. L" x W" /Each OK x OK x OK x OK055 60" Diameter OK057 Dimensions Table No. Used with L" x W" x H" Capacity /Each OG344 Rectangular 49 x 31 1/4 x 32 1/ OG340 Round 49 x 31 1/4 x 41 1/ OG340 FLAT STACKING CADDIES Speeds up set-up and storage of all sizes and types of folding tables 4" diameter swivel casters mounted to a heavy gauge welded frame Side rails are covered with neoprene rubber to protect tables POLYPROPYLENE FOLDING TABLES Multi purpose Lightweight, durable and portable Easy to clean Folding legs automatically lock by use of gravity activated mechanism when opened High strength 19-gauge, 1 1/8" diameter steel tubular legs have welded crossbars for durability and stability 74" L x 31 1/4" W x 36 1/4" H. Wt.: 67 lbs. Stacks " / 30" / 36" W x 60" / 72" L tables or " W x 72" L tables No. OG342 /Each $ OG342 Dimensions Wt No. Description L" W" H" lbs. /Each OK131 Rectangular 48 x 30 x OK129 Rectangular 72 x 30 x OK130 Rectangular 96 x 30 x OK137 Round 48 x 48 x OK138 Round 60 x 60 x /2" L x 31 1/4" W x 36 1/4" H. Wt.: 78 lbs. Stacks " / 30" / 36" W x 96" L tables or " W x 96" L tables No. OG341 /Each $ OG340 OK129 Chairs not included R26028E OK137 OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1597

11 COMPUTER ALL-WELDED DESKTOP CABINETS Locking slide-in pocket doors with inner compartments for storage of files or manuals Pull out keyboard shelf Sliding tray may be used for mouse pad or as a writing surface Vented back for air circulation Finish baked enamel blue and grey Ships fully assembled No. OC533 OPEN PEDESTAL STANDS 32" high, designed to support the desk top unit for stand up operation Blue baked enamel finish Includes: Convenient storage shelf and adjustable leg levellers for uneven work surfaces Shipped knocked down No. OC534 ENCLOSED PEDESTAL STANDS/PRINTER STANDS Roll in/roll out hideaway printer stand which locks inside the enclosure when not in use Printer stand has two adjustable, one bottom 28" W x 25" D shelves for printers or peripherals and paper 30" high enclosure may be oriented for left or right hand access Blue and grey baked enamel finish Shipped knocked down No. OC535 Desktop cabinet with open pedestal stand Equipment Not Included OC533 OC534 OC535 Desktop cabinet with enclosed stand/ printer stand Dimensions Wt. No. Description W" x D" x H" lbs. /Each OC533 Desktop Upper Computer Cabinet Only 30 x 27 3/4 x OC534 Computer Cabinet Open Pedestal Base Only 30 x 27 3/4 x OC535 Computer Cabinet Enclosed Base w/printer Stand 30 x 27 3/4 x MOBILE COMPUTER CABINETS All-steel welded construction Top monitor compartment is 22 1/2" W x 23" D x 18 3/4" H with a slide-out keyboard shelf Locks independently of bottom section which includes 2 adjustable shelves 5" polyolefin casters (2 rigid, 2 swivel w/brake) Total dimensions: 26" W x 24" D x 64" H Wt.: 149 lbs. Finish durable baked enamel blue and light grey Includes: Vented back for air circulation and a 6-outlet power strip with built-in surge suppression Shipped fully assembled Equipment not included No. OC532 /Each $ MOBILE COMPUTER CABINETS All-steel construction Slide-out keyboard tray Lower lockable cabinet is 24 5/8" W x 22 7/8" D x 22 5/8" H Two-position shelf can be located for desk top style or up to 18" H tower style CPU's Fixed shelf is 24 5/8" W x 22 7/8" D x 11 1/2" H and provides ample room for any sheet fed style or continuous form style printer Rear cabinet access holes for paper feed, cables and ventilation fan (not included) 5" polyolefin casters (2 rigid, 2 swivel w/brake) Total dimensions: 27" W x 24" D x 49 1/4" H Weight: 125 lbs. Colour: Blue Shipped knocked down, assembly required with simple hand tools Equipment not included No. OC839 /Each $ MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING MOBILE SECURITY COMPUTER CABINETS Secure locking cabinet with resistant acrylic see-thru window for LCD monitor Slide out locking keyboard is 19 3/4" W x 17 1/2" D x 4" H Lower compartment is 20 1/2" W x 21" D x 23 1/2" H and has a locking front and rear access doors Two convenient side wing shelves for additional work space, fold down when not required 5" heavy-duty casters (2 rigid, 2 swivel w/brake) Overall dimensions: 24 1/2" W x 22 1/2" D x 62 1/4" H Powder coated finish provides a durable finish Equipment not included No. Colour /Each OG880 Blue OG881 Putty OG882 Light Grey OG883 Black COMPUTER CABINETS A unique two-piece heavy-duty all-welded steel construction that provides space efficient security for your valuable electronic equipment Locking upper compartment with plexiglass window provides viewable access for most 20" monitors Lower compartment features one fixed bottom and one adjustable shelf Top level can be bolted onto a desk (bolts not included) Louvers in the rear provide equipment ventilation Heavy-duty all-welded steel top and bottom sections bolt together for easy assembly Includes: 5" casters (2 rigid, 2 swivel w/brake) Equipment not included OE825 Dimensions No. Description W" x D" x H" Colour /Each OE824 Complete Computer Enclosure w/casters 24 1/2 x 22 1/2 x 59 1/2 Light Grey OE825 Complete Computer Enclosure w/casters 24 1/2 x 22 1/2 x 59 1/2 Putty OE826 Top Level (internal) 20 3/4 x 21 3/4 x 19 1/4 Light Grey OE827 Top Level (internal) 20 3/4 x 21 3/4 x 19 1/4 Putty EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE R27019E

12 COMPUTER CABINETS FOR HARSH ENVIRONMENTS Heavy-duty all-welded construction with forklift channels for easy movement Built-in fan with guard and filter keeps equipment cool and provides positive air pressure in the enclosure to keep out dust Locking upper compartments with plexi-glass window provides viewable access to most 20" monitors Locking Pull-out drawer facilitates ergonomic operation of keyboard and mouse while top and bottom compartments are locked Roll-out printer shelf in lower section provide full access and is height adjustable for any style equipment Adjustable bottom shelf provides space for desktop or tower style CPUs Rear access panel for easy cable management Caster base includes 5" polypropylene casters (two-rigid two-swivel with brake) Tough powder coat finish Includes 6-outlet UL listed and CSA approved power strip with built in surge protection Optional caster base available for even greater mobility ON574 Mfg. Dimensions Weight No. No. Description W" D" H" lbs. Colour /Each ON574 CSC6850 Computer Cabinet 28 1/2 28 1/ Blue ON575 CSC6852 Optional Caster Base 38 Blue FLAT PANEL MULTIMEDIA CARTS Move your flat-panel monitor and other equipment safely and securely Holds up to 42" monitors Steel construction cart, mobile on 4 casters (2 locking) Dimensions: 39 1/2" W x 27" D x 68" H Includes: UL approved electrical assembly with surge protector and a detachable file pocket Easy assembly instructions included Equipment not included OK002 EXTRA WIDE COMPUTER CABINETS Heavy-duty all-welded construction with vented back for air circulation Separate locking upper and lower compartments allow access only to the equipment needed Slide out keyboard shelf facilitates ergonomic operation Two adjustable shelves in lower section can be located for any style equipment Top compartment: 46 1/2' W x 23"D x 18 1/2"H Lower cabinet section: 46 1/2' W x 23"D x 30"H Overall size: 50"W x 24"D x 64" Tough powder coat finish Complete with five polypropylene casters Includes 6-outlet UL listed and CSA approved power strip with built-in surge protection No. ON576 Mfg. No. CSC6718 Each: $ PLASTIC AV HEIGHT-ADJUSTABLE CARTS Push and position media equipment with ease Heavy-gauge plastic resists dents and scratches Holds up to a 20" monitor and has three outlet UL approved mini-surge protector with power switch Mobile on 4 swivel casters (2 locking) Capacity: top shelf 50 lbs., middle shelf 15 lbs., bottom shelf 15 lbs. Dimensions: 27 3/4" W x 18 1/2" D x 42" H Equipment not included No. OK004 /Each $ COMPUTER OK003 OK002 Open OK003 With a Locking, Steel, Ventilated Cabinet to Store Materials Securely ECONOMY WORKSTATIONS Moulded shelf and legs will not scratch, dent or rust Complete with surge electric and 4" casters (two with brakes) Assembly required Dimensions: 32" W x 24" D x 27" H Equipment not included DURACART TM Lightweight plastic multimedia cart is excellent for use with monitors and multimedia projector system Includes: UL listed 3-outlet electric assembly, casters (2 locking), 15' cord and a cord wrap management system Guaranteed against stains, scratches, dents and rust Equipment not included No. OK085 /Each $ STEEL TABLE & CABINET CARTS Excellent for monitors and projectors All-steel construction, die-pressed shelves and arc welding for maximum strength and durability Top shelf can adjust to heights of 26", 30", 38" and 42" Includes: UL listed 3-outlet electric assembly with 25' cord 4" casters with 2 locking Equipment not included No. OK086 /Each $ R33809E No. Wt. Grey Description lbs. /Each OD273 Economy Workstation No. OK087 Includes: Lower locking compartment for secure storage /Each $ OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1599

13 COMPUTER AVOID DEBILITATING ERGONOMIC INJURIES KEYBOARD / MOUSE PLATFORM(S) The goal is to have the hands and wrists remain in a neutral position during typing and prevent over-reaching when using the mouse. An under-the-desk articulating keyboard / mouse platform is an essential component of the concept of total adjustability. The platform should rotate 360 degrees. It should be adjustable up to 6 inches in height, tilt from 10 degrees to + 15 degrees, and extend 2 inches out from the desk or return. The platform should have a non-skid surface. The platform should have an adjustable wrist rest. Having the mouse in close proximity to the keyboard is very important. Repeated or prolonged over-reaching or hyperextending for a mouse can place a stress on the shoulder and ultimately result in tendonitis, inflammation, etc. This frequently happens when a conventional keyboard tray is used without a mouse tray. The keyboard tray requires that one sit farther back from the work surface; this requires one to lift their arm up and out to use the mouse. Ideally, the mouse platform should be an integral part of the keyboard platform. KEYBOARD AND MOUSE PLACEMENT Place the keyboard and mouse directly in front of and close to you. Adjust the keyboard as low as possible, but with adequate leg room. Adjust the slope of the keyboard so that your wrists are straight. They should not extend downward or upward while typing. Type with your hands and wrists floating above the keyboard, using the wrist pads only to rest your wrists while typing. Studies have shown that office workers tend to relax their arms against the wrist rest while using the computer. It is important to avoid doing so, as using the wrist rests to support the arms often isolates movements from your wrist down to your fingers, which can cause problems. Avoid resting your wrist on sharp objects (e.g., desk edge). KL-28S ECONOMY KEYBOARD DRAWERS Laminate with 3-mil PVC edging (28" x 11.75") Fixed height, 16" ball bearing slides Keyboard and mouse on same level Mouse-friendly surface Suitable for right or left handed users Low profile platform maximizes knee clearance Meets or exceeds BIFMA standards Optional 27" gel filled wrist support and anti-skid bottom OK383 Economy Keyboard Drawer ON572 Gel-Filled Wrist Support TANGO ARTICULATING KEYBOARD SYSTEMS Lever-activated height adjustment Height adjustment range of 6" below worksurface Trigger activated +/- 15 angle adjustment 23" durable ABS plastic tray in a black finish Extendable mouse surface extends 7.5" outside tray 19" Gelfoam TM removable, snap-in wrist rest Comfort grip handle to extend or store keyboard Forward indexing mouse surface with three positions Built-in cable management and fence Indexing mouse friendly surface 17" low profile ball bearing track 360 swivel mount Adaptable for right or left handed users Low profile mechanism and platform maximizes knee clearance Meets or exceeds BIFMA and ADA standards No. OK382 /Each $ MATERIAL HANDLING & JANITORIAL & MAINTENANCE OK383 SAFETY EQUIPMENT & METALWORKING HEAVY-DUTY KEYBOARD DRAWERS HEAVY-DUTY SLIDE OUT TRAYS Adjustable mounting brackets Smooth action ball bearing slides Available with or without extendible mouse platform Tray size: 11" x 23" w/o mouse platform OB536 Keyboard Tray (Heavy-Duty) OB537 Keyboard Tray (Heavy-Duty) w/mouse Platform KEYBOARD DRAWERS 26" tray with integrated mouse area Fits all keyboard sizes 3 position height adjustable Includes a full-length gel wrist pad Dimensions: 26" x 13 5/8" x 2 3/4" No. OTG387 /Each $92.77 HEAVY-DUTY ARTICULATING KEYBOARD TRAYS Fully articulating swing arm is height/depth adjustable Swivel mount with tilt tray feature Includes anti-skid surface Keyboard stores under work surface Tray size: 11" x 23" w/o mouse platform 11 1/2" x 21 1/2" w/mouse platform OB538 Heavy-Duty Articulating Keyboard Tray OB539 Heavy-Duty Articulating Keyboard Tray w/mouse Platform JIVE ARTICULATING KEYBOARD SYSTEMS Lift n' lock "leverless" height adjustment Height adjustment range of 2.5" above and 6" below work-surface Innovative dial tilt makes angle adjustment quick and easy - angle adjustment +10 to -15 Tilt and height indicator displays present keyboard position 26" steel platform Mouse and keyboard on the same level 26" Gelfoam TM palm/wrist support Mouse/cord management rails (right or left) Anti-skid / anti-static pads keep keyboard in place Mouse friendly surface 21" smooth glide storage track 360 swivel mount Suitable for right or left handed users Low profile mechanism and platform maximizes knee clearance Meets or exceeds BIFMA and ADA standards No. ON567 /Each $ DUSTER - S02007 Pressurized non-flammable gas that removes microscopic particles of lint, dust, ferrous oxide and other contaminants Non-abrasive Ideal for electronic equipment, laboratory equipment, precision mechanical parts, optical equipment and more Size: 8 oz. No. AB934 /Each $11.56 EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE R33811E

14 COMPUTER PERSONNEL GROUNDING TABLE MAT KITS Vinyl static dissipative table mats drain static charges to protect static sensitive materials such as electronics, computers and instruments A three-layer construction provides excellent electrical properties Top layer is a tough dissipative vinyl, the centre layer has a highly conductive metal scrim and the bottom layer is dissipative foam, which provides a great cushion and will not slip Kit includes 15' common point ground, which attaches to a wrist strap Surface resistivity: ohms/sq. FLOOR MAT KITS Conductive rubber floor mats are designed to drain static charges to the ground, using a path created from a conductive surface Resists solder, fluxes and most acids used in an electronic production area Kit includes 10' mat ground cord and heel grounder Surface resistivity: ohms/sq. No. Description Dimensions" /Each OE834 Table Mat Kits 24 x OD992 Floor Mat Kits 24 x ARSTAT 5000 SERIES WRIST STRAPS Premium performance wrist straps uses a silver-plated monofilament, continuous thread throughout the nylon band, which establishes a 360 conductive path to maintain reliable continuity Stainless steel back plate ensures skin contact Available with a 6' or 10' cord, complete with 1 megohm resistor OE841 With 6' Coil Cord OE842 With 10' Coil Cord HEEL & TOE GROUNDERS Disposable heel grounder is made from black polyethylene with adhesive attachments Designed to discharge static from a person to a grounded walking surface Reusable heel and toe grounders feature built-in resistor for safety OE840 OE839 OE839 Toe Grounder with Resistor OE840 Heel Grounder with Resistor R33812E ELASTIC ADJUSTABLE WRIST STRAPS Extra wide, soft elastic band for increased wearer comfort Has silver impregnated nylon knitted on inside for superior conductivity that reliably removes generated static charges Adjustable, may be fitted to almost all people Locking clasp locks band so it will not slip Non-shedding, non-sloughing band material that is cleanroom compatible; safe for micro-electronics UL Listed Circumference - 2.5" - 13" NOTE: All bands have a 4 mm snap stud. Complete wrist strap kits include an alligator clip OD974 Band Only OD975 Band w/6' Coil Cord STATIC DISSIPATIVE ANTI-FATIGUE NO. 791 QUICKLY DRAINS STATIC ELECTRICITY FROM WORKERS Frequently used in commercial areas where static discharge can harm products or equipment Excellent resistivity: RTG 1 x 10 7 ohms Super resilient Nitricell sponge base provides long-term comfort and relieves employee fatigue Easy-to-clean vinyl surface and safety bevelled edges Each mat has a one mega ohm snap and must be grounded Workers must be wearing conductive shoes or heel grounders (SAL252) to allow the mats to function 1/2" thick Colour: Grey HEEL GROUNDER NO. 793HG The heel grounder allows static electricity to pass from the worker to the ESD matting or flooring One size fits all and the velcro loop allows for easy attachment Allow the fabric strip to touch the workers skin for best performance One megohm resistor 0.060" thick No. /Each SAL STAT-FREE WORK SURFACE MATS Very functional, effective solution in areas where static control is imperative Designed for workbenches and desks, underneath computers and at workstations where sensitive components are packaged or repaired Flexible, three-layer construction has a conductive scrim sandwiched between two layers of vinyl Provides excellent electrical properties For maximum effectiveness, ground the mat using SAR851 and ground the worker with SAR852 Colour: Blue Dim. 3-YEAR No. W' x L' /Each WARRANTY Dim. No. W' x L' /Each NH534 2 x SAR847 2' x 3' NH535 3 x SAR848 2' x 4' CUTS UP TO 75' IN LENGTH SAR849 2' x lin.ft NB694 3 x lin.ft SAR850 3' x lin.ft NB695 4 x lin.ft ACCESSORIES SAJ574 15' L Ground Wire (Sold Separately) SAR851 Common Point Ground Cord 15' Grounding snap is attached to lower left hand corner of each mat SAR852 Wrist Strap w/6' Coil Cord OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1601

15 COMPUTER ESD TRAYS Trays provide conductive and shielding protection for use in electronics manufacturing Resistant to abrasion and chemicals Easy to clean with steam or water (temperature range: -60 F to 250 F) Trays are permanently dissipative and are unaffected by washing Dimensions Weight No. L" x W" x H" lbs. /Each CF x 12 x CF x 14 x Dimensions Weight No. L" x W" x H" lbs. /Each CF x x CF x x ESD DIVIDER BOXES Dividable, conveyable boxes are available in conductive material (black). All containers can be divided into compartments by length and/or width. Dividers are on 1.25" centres. CONDUCTIVE BINS Black, carbon-filled, injection moulded polypropylene copolymer resin. These containers provide conductive and shielding protection for use in electronics manufacturing. Provides a Faraday cage for parts when container is covered. Unaffected by humidity. Permanently conductive. Static decay rate of <0.10 seconds at +5 kv applied charge ohms per square resistivity. OUTSIDE DIMENSIONS SHORT DIVIDERS LONG DIVIDERS COVERS Dim. Top Dim. Botttom Vol. Wt. No. L" x W" x H" L" x W" Cu. ft. lbs. /Each No. Slots /Each No. Slots /Each No. /Each CONDUCTIVE BINS CB x 8.5 x x CB CB CB CB x 8.5 x x CB CB CB CB x 8.5 x x CB CB CB CB x 10.9 x x CB CB CB CB x 10.9 x x CB CB CB CB x 17.4 x x CB CB CB CB x 10.9 x x CB CB CB CB x 10.9 x x CB CB CB CB x 10.9 x x CB CB CB CB x 10.9 x x CB CB CB CB x 17.4 x x CB CB CB CB x 17.4 x x CB CB CB CB x 17.4 x x CB CB CB OPTICO PROFESSIONAL CLEANING WIPES Individually wrapped, pre-moistened, quick drying anti-static formula easily removes fingerprints, dust, dirt, germs and other grime Ideal for cleaning of critical optical and electronic surfaces such as prescription, performance and protective eyewear, specialty lenses, LCD, plasma and interactive touchscreens, smart phones, and other hand held devices Made with Dupont Sontara aerospace grade non-woven fabric Professional grade, Canadian made, quality guaranteed AVAILABLE IN: ON587 Small 5 1/4" x 3 1/2" ON588 Medium 6" x 7 1/4" ON589 Large 12" x 13". Ideal for multiple or large optical and electronic surfaces: LCD, plasma and interactive touch-screens, smart phones, interactive whiteboards, etc. (one wipe will clean an entire call center of screens) ON587 ON588 ON589 Wipes No Description /Box /Each ON587 Desktop Dispenser ON588 Desktop Dispenser ON589 Reclosable Bag R33813E 1602 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

16 SAFES DATA PROTECTION MEDIA SAFES Protects valuable records from vandalism, fire, dust and magnetism Paper records will withstands temperatures up to 177 C (350 F) Computer media records will withstand temperatures up to 52 C (125 F) and humidity up to 80% Rating: UL Class hour for safe, and data/media insert was furnace tested by manufacturer to 125 0F (52 0C) for 1 hour Pull out media drawers and stationary shelves accessories are also available OE770 must be inserted into a U.L. Class 350, 1-hour filing cabinet Colour: Beige F.O.B. Saint-Jérôme, Quebec. HIGH SECURITY COMPOSITE SAFES UL TL-30 certified Built to exceed all industry standards Full composite construction features 1 1/2" diameter steel bolts Heavy plate steel frame, 3-way bolt work High quality adjustable hinges Class 350 F, 1-hour fire label Colour: Charcoal F.O.B. Saint-Jérôme, Quebec. Outside Dimensions Wt. No. H" x W" x D" lbs. /Each OE x 21 1/2 x 21 1/ OE x 26 1/2 x 26 1/ OE /8 x 15 x 21 1/ Outside Dimensions Wt. No. H" x W" x D" lbs. /Each OE x 21 1/2 x OE x 24 1/2 x OE x 26 1/2 x 25 1/ GRAND PRIX LINE UL LISTED SAFES Keep documents intact for one full hour despite exterior temperatures as high as 927 C (1700 F). F.O.B. Saint-Jérôme, Quebec. Features include: Heavy gauge satin coat steel with anti-rust treatment Insulated with moisture pockets between the walls Heavy-duty hinges 6" continuous fixed locking bar Key changing combination lock Adjustable shelves Heavy-duty caster base LEDGER SAFE Full size ledger safe ensures document security despite ambient temperatures reaching 1000 C (1850 F) for a full two hours. F.O.B. Saint-Jérôme, Quebec. Features include: Three heavy-duty hinges Three adjustable shelves Key changing combination lock Caster base No. Outside Dimensions Inside Dimensions Cap. Wt. Black Beige H" x W" x D" H" x W" x D" Cu. in. Shelves lbs. /Each UL LISTED 177 C (350 F) FOR 1 HOUR OC750 OA x 18 1/2 x 18 1/2 17 1/2 x 15 1/2 x 13 1/ OC751 OA x 21 1/2 x 21 1/2 22 3/8 x 18 1/2 x 16 3/ OC752 OA x 26 1/2 x 26 1/2 32 1/4 x 23 1/2 x 21 3/ OC753 OA x 26 1/2 x 26 1/2 42 1/4 x 23 1/2 x 21 3/ LEDGER CABINET MANUFACTURER CERTIFIED 177 C (350 F) FOR 2 HOURS (CLASS B) OC749 OC x 26 1/2 x 26 1/2 50 x 20 x FIRE RESISTANT FILING CABINETS Filing cabinets are ULC listed. Cabinets maintain interior temperatures below 177 C (350 F) in ambient temperatures reaching 927 C (1700 F) for one hour. The char point of paper is only 230 C (420 F). Valuable documents, mailing lists and records are kept safe from fire and theft. Each drawer is independently insulated to protect documents even when another drawer is left open. Key operated plunger lock secures all drawers. F.O.B. Saint-Jérôme, Quebec. Horizontal Vertical R25888E No. Outside Dimensions Inside Dimensions Wt. Black Beige H" x W" x D" H" x W" x D" Drawers lbs. /Each VERTICAL FILING CABINETS OC737 OC x 19 3/4 x /2 x 15 x OC738 OC x 19 3/4 x /2 x 15 x OC739 OC x 19 3/4 x /2 x 15 x HORIZONTAL FILING CABINETS OC743 OC x 38 3/4 x 23 1/2 10 1/2 x 32 1/2 x 15 1/ OC744 OC x 38 3/4 x 23 1/2 10 1/2 x 32 1/2 x 15 1/ OC745 OC x 38 3/4 x 23 1/2 10 1/2 x 32 1/2 x 15 1/ OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1603

17 FILING & SYSTEMS WELDED CABINETS All-welded steel storage cabinet is still the best choice for your office, plant, school and institutional storage needs Standard features include: fully adjustable shelves; recessed handle; cylinder lock; and coat rods (wardrobe and combination types) Choose from Hi-Boy, Lo-Boy, Wardrobe, and Combination cabinets in grey, beige or black enamel finish. Additional shelves are available. FB038 Lo-Boy Type FB036 Combination Type FB039 Hi-Boy Type FB030 Wardrobe Type No. Dimensions Wt. Grey Beige Black Description W" x D" x H" lbs. /Each FB039 FB034 FB029 Hi-Boy 36 x 18 x FB040 FB035 FB030 Wardrobe 36 x 18 x FB041 FB036 FB031 Combination 36 x 18 x FB038 FB033 FB028 Lo-Boy 36 x 18 x FB037 FB032 FB027 Add'l Shelf 36 x 18 x CABINET MOVERS, SET OF 2 Pair of tough steel dollies makes it easy to move cabinets, files, furniture or other bulky and heavy objects Thick steel frame is supported by 2 1/2" swivel casters that allow manoeuvrability in tight areas Platforms centre is recessed to secure furniture legs 1000-lbs. maximum load capacity per set No. OK010 /Each Set $ Cabinet not included ALL-IN-ONE FILING SYSTEMS THE MOST VERSATILE FILING AND SYSTEM ON THE MARKET TODAY! ALL THE YOU WILL EVER NEED IN ONE COMPACT UNIT! 2 models Full size filing cabinets 2 or 3 shelf storage cabinet Box storage drawer IDEAL FOR OFFICE OR INDUSTRIAL USE Drawer slides are roll formed for strength and straightness Fully welded lockable cabinet pedestal includes adjustable shelf Putty baked-on enamel finish CHOOSE FROM 4 MODELS s OC379 & OA040 Gives you two full size file drawers, a convenient box storage drawer and a 35 5/8" high storage cabinet with one adjustable shelf. s OC380 & OA499 Comes with three full size drawers and 42" high storage cabinet with two adjustable shelves. SHIPPED FULLY ASSEMBLED, READY FOR USE OA040 No. Drawer Black Beige Description Style /Each OC379 OA040 Overall Size: 1 Box Drawer /8" H x 18" D x 36" W Cabinet size: 2 File Drawers 35 5/8" H x 18" D x 17 1/8" W OC380 OA499 Overall Size: 3 File Drawers " H x 18" D x 36" W Cabinet Size: 42" H x 18" D x 17 1/8" W Box Drawer: 4" H x 18" D x 12 5/8" W - File Drawer: 11 1/2" H x 18" D x 12 5/8" W - OA499 R33869E 1604 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

18 VERTICAL FILES W/RECESSED DRAWER HANDLES High side walls accommodate hanging files and eliminate the need for hanging file frames Removable cam lock included Full cradle suspension Easy-to-grab recessed pulls on drawers Fully adjustable and removable follower block is standard in every drawer Legal size: 18" W x 26 9/18" D FILING & SYSTEMS LATERAL FILES Professional quality, all-welded construction Patented heavy gauge all-metal anti-tip system Reinforcing cross member on all 4 and 5 drawer files Locking mechanism with "no plastic parts" locks all drawers Drawers rest on heavy gauge, triple extension progressive arms containing 80 steel ball bearings per pair Dimensions: 36" W x 18" D (also available in 30") Cabinets with receding doors available Other colours also available No. No of Wt. Black Grey Putty Drawers Height" lbs /Each OTE611 OTE612 OTE OTE618 OTE619 OTE OTE624 OTE625 OTE No. Wt. Black Beige Grey Description Height" lbs. /Each OE738 OE739 OF205 2 Drawers OE740 OE741 OF208 3 Drawers OE723 OE724 OF206 4 Drawers 53 1/ OE742 OE743 OF207 5 Drawers 65 1/ DOOR UNITS Thermally fused, scratch and stain resistant laminate 1" thick top and end gables All surfaces have a 3 mm PVC matching edge Adjustable floor leveling glides Ready to configure with a variety of work-surface and other storage components 35.4"W x 22"D x 29.5"H Weight: 74.8 lbs/33.9 kg American cherry finish Lock and keys included Tested to meet ANSI & BIFMA desking standards Shipped completely assembled No. ON559 /Each $ LATERAL FILES WITH LOCK 2-drawer lateral file storage Locking mechanism and security key Full extension drawers Drawers are supported by heavy-duty ball bearing slides 36" W x 22" D x 29" H American Cherry finish Shipped completely assembled No. ON558 /Each $ MULTI UNITS Thermally fused, scratch & stain resistant laminate Designed for quick and easy assembly Fits under a work-surface or as free standing 35.4" W x 21.9" D x 28.5" H Weight: 162 lbs/73.5 kg American cherry finish Tested to meet ANSI & BIFMA desking standards No. ON560 /Each $ IN-1 LATERAL FILE CENTRES Fully assembled, all-welded -piece design, no assembly required Combines lockable storage and filing in one compact unit Lateral file drawer features 100% drawer extension on progressive telescoping ball-bearing slides providing smooth trouble-free operation Single lock system secures all drawers with one key (two keys included) Door locks separately (two keys included) Extra deep lateral file drawer accommodates letter or legal size files 30" W x 18" D x 26" H Available in a tough black or putty powder coat finish ON561 R33868E ON561 Putty ON562 Black OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1605

19 FILING & SYSTEMS ENVIRASTOR STOR/DRAWER Economical & environmental: 100% recycled material and a minimum of 67% post-consumer waste Sturdy internal liner in the outer shell provides long lasting strength Attractive green graphics are printed on the kraft background with water-based ink Recommended stacking 2-high on metal shelving Record Inside Drawer Dim. No. Size W" x D" x H" /Each OA077 Cheque 9 x 24 x 4 1/ OA086 Letter 12 1/4 x 24 x 10 1/ OA078 Legal 15 1/4 x 24 x 10 1/ STOREX FILE DRAWER SYSTEMS Durable plastic construction with plastic rollers on drawers for smooth operation Convenient built-in label holder Accommodates file folders or hanging files Stackable up to 10 units high with secure interlocking system Ideal for dust and mildew control in schools, hospitals and other public buildings FILE FOLDERS Other colours available ECONO/STOR BOXES Perfect choice for economical storage of semi-active or dead records Features smooth rolled edges provides a clean finish and avoids paper cuts The versatile OA081 can be adapted to your needs, holding up to one cubic foot of legal or letter size files d per box of 100 No. No. Description Letter /Box Legal /Box 1/2 CUT REVERSIBLE 9 1/2 pt Manila OB OB /2 pt Ivory OB OB /2 pt Ivory OB OB STRAIGHT CUT 9 1/2 pt Manila OTD OTD /2 pt Ivory OTD OTD Record Inside Drawer Dim. No. Size W" x D" x H" Colour /Each OE785 Letter 15 x 24 1/4 x 11 1/2 Grey/Granite (Front) OE786 Letter 15 x 24 1/4 x 11 1/2 Black/Grey (Front) OE812 Legal 17 7/8 x 24 3/8 x 11 1/4 Grey/Granite (Front) Record Inside Drawer Dim. No. Size W" x D" x H" /Each OA082 Letter 12 x 24 x OA079 Legal 15 x 24 x OA081 Letter or Legal 12 x 15 x BOXES Fits letter or legal size Dimensions: 12" W x 15" D x 10" H No. OA087 Wood grain finish Stackable up to 850 lbs. 59% post consuming /Each $12.71 OA087 NOVEX BOXES Recycled content: 80%, post-consumer waste: 59% Letter or legal size 12" x 15" x 10"H Assembly required No. OL953 Mfg. No /Each $4.53 No. OA % recycled material Stackable up to 350 lbs. 67% post consuming Comes with attached lid /Each $8.13 FILES Stack up to 5 boxes high Hanging folder rails included Recycled material: 80% Post-consuming: 51% No. OTD752 Letter size 12 1/2" W x 23 1/4" D x 10 3/8" H /Each $29.67 No. OTD753 Legal size 15 1/2" W x 23 1/4" D x 10 3/8" /Each $32.67 OTD753 OA075 STOW-AWAY CRATES Efficiently transports files, binders, office supplies and tools while keeping materials inside, safe, secure and orderly Perfect for travellers, this lightweight, yet extremely durable compact solution features a telescoping handle and two solid rubber wheels Provides 1.2 cubic feet of enclosed space and offers a 50 lbs. weight capacity Entire unit compacts, folding down to the size of a small briefcase, fitting easily under your vehicle seat or airplane overhead compartment Extended dimensions: 16 1/4" W x 14 1/2" D x 39" H Collapsed dimensions: 16 1/2" W x 3 1/2" D x 18" H No. OK017 /Each $51.78 R33892E 1606 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

20 R33871E VERTICAL FILING SYSTEMS Ideal for filing blueprints, charts, artwork and other oversized documents. Cuts filing and retrieving time; saves on floor space. Exclusive suspension system allows clamps to slip easily in and out of storage racks. Clamps open to 1" to hold up to 100 individual sheets (20 lbs. maximum weight per clamp). HEAVY-DUTY MOBILE STANDS Steel construction with four 3" ball bearing swivel casters (2 lock) Holds 12 hanging clamps in pivot brackets that swing open for easy access to contents Height adjusts from 43 5/8" to 61 5/8" for sheets up to 54" long Base extends 27 1/2" to 37 1/2" Easy assembly Tropic sand finish Wt. No. Description lbs. /Each OE129 Mobile Stand Only OA195 Mobile Stand c/w 12-24" Clamps OA196 Mobile Stand c/w 12-30" Clamps OA213 Mobile Stand c/w 12-36" Clamps OA197 Mobile Stand c/w 12-42" Clamps PRINT-LOCK HANGING CLAMPS Clamps hold up to 100 sheets or 20 lbs. Green plastic label holders included Available in natural aluminum with polished chrome plated cast alloy wing knobs and black end caps Clamp Wt. No. Description pkg. lbs. /Each OE135 18" Long Hanging OE136 24" Long Hanging OE137 30" Long Hanging OE138 36" Long Hanging OE139 42" Long Hanging WIRE ROLL FILES Organize, protect and keep oversize docu ments within ready reach Exclu sive dustguard bottom keeps materials clean and protects edges from tearing and bending 2 different compartment heights; four 8" x 8" storage bins Heavy-gauge steel rod construction with white plastic coating; select documents at a glance Swivel casters Dim.: 30 1/2" H x 16 1/4" W x 16 1/2" D Wt. 12 lbs No. OA209 /Each $ UPRIGHT ROLL FILES Economical files keep drawings, blueprints and charts organized and within easy reach Constructed of heavy- duty corrugated fibreboard with walnut wood grain finish Tubes reinforced by plastic moulding Slotted hand hole in back 4 rubber feet O.A.: 22" H (12" high in front) x 15" W x 12" D Weight: 4 lbs. Shipped knocked down No. of Tube No. Tubes Size" /Each OA /8 sq OA /4 sq FILING & SYSTEMS VERTICAL FILING CABINETS All steel construction provides secure, high density, bulk storage of reproductions Holds up to 12 hanging clamps (clamps not included) Doors can mount for left or right hand operation Locking handle Small cabinet holds 18" to 24" clamps Large cabinet holds up to 36" clamps Colour: Tropic Sand Shipped assembled Wt. No. Description lbs. /Each OB142 Small Vertical File Cabinet: 42" H x 16" W x 27" D OB143 Large Vertical File Cabinet: 54 1/2" H x 16" W x 39" D TUBULAR STEEL WIRE ROLL FILES Low price, high quality appearance Light grey tubular steel frame with chrome plated grids Twin wheel casters (2 lock) Dim.: 23 3/8" H x 18 1/3" W x 14 3/8" D Shipped knocked down Tube Wt. No. Description Size" lbs. /Each OE Tube Storage 3 3/4 x 3 3/ OE Tube Storage 2 3/4 x 2 3/ MOBILE ROLL FILES The ideal form of active filing for engineers, draftsmen, surveyors and designers Materials store upright in square fibreboard tubes; grandstand design allows different size rolls to be stored in one file Sturdy, wood-core construction with laminate beige vinyl covering Swivel casters Shipped knocked down No. of Overall Dimensions Wt No. Tube Size" Tubes W" x D" x H" lbs. /Each OA /4 x 3 3/ /8 x 15 3/4 x 29 1/ OA /4 x 2 3/ /4 x 13 1/4 x 23 1/ OA /4 x 2 3/ /8 x 15 3/4 x 29 1/ OE131 7 x /8 x 15 3/4 x 29 1/ Look for this symbol for environmentally friendly products! OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1607

21 FILING & SYSTEMS STEEL PLAN FILES Welded steel construction, wrap around corners and sturdy inner frame Front supports add stacking strength Files are modular so they can be used individually or in a space saving stack Stack up to five high on a closed base Reinforced top offers additional work and storage space 5 and 10 drawer files can be mixed or matched for customized high volume storage Choice of 6" closed base or 20" high base Baked enamel finish in Tropic Sand or Grey All flat files have museum/archival quality point finish OPTIONAL BASES FOR STEEL PLAN FILES Closed Bases Holds up to five files Raises files 6" off ground Recessed 2 3/4" High Bases Raises files 20" off the floor and raises top of file to a 36" level to provide work space Enclosed back and sides and open front provide extra bookshelf space OB169 OB151 Base sold separately 5 DRAWER Versatile file stores up to 500 sheets per unit active filing, 750 sheets of semi-active, or 1000 sheets of inactive material Five large capacity 2" deep drawers in three cabinet sizes 10 DRAWER Ideal for high traffic project storage areas Ten 1" deep drawers allow the easiest retrieval of materials from the file and minimize material damage No. Inside Drawer Cabinet Wt. Grey Tropic Sand Description W" x D" x H" W" x D" x H" lbs. /Each OB146 OA651 5 Drawer 37 x 26 x 2 1/8 40 3/8 x 29 3/8 x 16 1/ OB148 OA186 5 Drawer 43 x 32 x 2 1/8 46 3/8 x 35 3/8 x 16 1/ OB151 OA220 5 Drawer 50 x 38 x 2 1/8 53 3/8 x 41 3/8 x 16 1/ OB158 OA Drawer 43 x 32 x 1 1/8 46 3/8 x 35 3/8 x 16 1/ OB161 OB162 High Base for OB146 and OA651 Cabinets OB165 OB166 High Base for OB148, OA186 and 10 Drawer Cabinets OB169 OB170 High Base for OB151 and OA220 Cabinets OB173 OA653 Closed Base for OB146 and OA651 Cabinets OB176 OA204 Closed Base for OB148, OA186 and 10 Drawer Cabinets OB179 OA187 Closed Base for OB151 and OA220 Cabinets Optional locks: OG362-5 Drawer Units /Each $ OG Drawer Files /Each $ FACIL TM FLAT FILE CABINETS A unique version of our existing 5-drawer flat steel plan files Offers similar functions yet more manageable features such as non locking, non archival and thinner gauge steel Unit capacity is stackable 2 high on closed base and one high on high base Colour: Light grey Assembly required OJ918 OJ920 Dimensions Wt. Dimensions Wt. Dimensions Wt. No. Description W" x D" x H" lbs. /Each No. Description W" x D" x H" lbs. /Each No. Description W" x D" x H" lbs. /Each OJ918 Flat File Medium 46 x 32 x 16 3/ OJ919 Closed Base 36 x 29 7/8 x OJ920 High Base 46 x 31 7/8 x 20 3/ R33870E 1608 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

22 E-Z SORT MAILROOM FURNITURE FILING & SYSTEMS Modular mailroom furniture was created with efficiency and flexibility in mind. Modular units can be used in a wide variety of combinations. Durably constructed of heavy-gauge steel to withstand the everyday rigours of a busy mailroom. All components feature grey baked enamel finish. Assembly required. SORTING TABLES WITH SHELF Table top is sturdy 1 1/8" thick wood laminate with tough T-mold edges Table surface adjusts from 28" to 36" high Supports up to 500 lbs. on extra-thick 1 1/2" steel legs Includes: Shelf with 14" clearance and 150 lb capacity for additional storage space Table and top sold separately order both No. Description Colour W" x D" x H" /Each OD938 Base Table w/shelf Grey 60 x 30 x 28 to OD939 Table Top Grey 60 x 30 x 1 1/ RISERS Supports one or more modules or can be used on a table for additional workspace to accommodate scales, postage meters and off surface computer storage No. Description Colour W" x D" x H" /Each OD941 Riser Grey 57 1/2 x 13 x SORTER MODULES Can be used as stand-alone or stacked Extra-wide 11" mail trays that form any combination of up to 25 compartments Shelves adjust in 7/8" increments Additional mail trays available in cartons of 5 Includes: 20 moulded compartment trays, each with finger cut-out and label holder OD940 Sorter module OD940 Sorter module OD941 Riser OD939 Table Top OD938 Base Table with Shelf No. Description Colour W" x D" x H" /Each OD940 Sorter Module Grey 57 1/2 x 13 x 14 1/ DATA ORGANIZERS Horizontal literature rack All racks easily bolt together with fasteners provided Steel modular, horizontal racks that can be grouped for floor or table mounted storage Capacity for literature or directories up to three inches thick 8" legs (model CA159) available to raise unit off the floor Tan enamel finish Includes: Mounting clips Can be stacked for personalized use! Specifications OA157 OA168 CA159 Height" 10 3/4 14 1/4 33 7/8 Width" 33 3/4 33 3/4 3 1/8 Depth" 11 5/8 11 5/8 12 1/8 Opening Width" Opening Depth" 11 1/2 11 1/2 - Opening Height" No. of Openings Paper Width" 8 1/2 8 1/2 - /Each $ $ $73.83 CA159 (Base only) OA168 OA157 R33872E VALUE SORTERS Economical yet sturdy steel/corrugated construction All steel exterior and support shelves Wide shelf fronts have label holders for easy identification of contents (labels included) Quick-lock design for easy assembly without tools Letter Size Compartments: 9 3/4" W x 12 1/2" D x 2 1/2" H No. No. of Overall Dimensions Wt. Black Grey Compartments W" x D" x H" lbs. /Each OA135 OA /4 x 13 1/2 x 25 3/ OA129 OA /4 x 13 1/2 x OA139 OA /4 x 13 1/2 x Can t find what you re looking for? Call us today! OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1609

23 FILING & SYSTEMS ALL STEEL BOOKCASES Shipped assembled and ready to use Heavy gauge shelves are adjustable on 2" increments allowing numerous configurations CLEAR LITERATURE DISPLAYS These wall mountable displays are made of optically clear, break-resistant plastic for ultimate durability High quality, single piece thermo-formed units Screws and anchors are included Pocket depth of 1 7/8" for magazines or pamphlets. Pocket Dimensions Pamphlet: 4 1/4" W x 9 3/4" H x 1 7/8" D Magazine: 9 1/4" W x 12 1/2" H x 1 7/8" D OD303 No. Dimensions No. of Wt. Black Grey Putty W" x D" x H" Openings lbs. /Each OA487 OA488 OA x 13 x OA490 OA491 OA x 13 x OA484 OA485 OA x 13 x 52 1/ OA492 OA493 OA x 13 x OA036 OA481 OA x 13 x OD297 OD308 LAMINATE BOOKCASES Oak finish Fully assembled OD307 OD309 OD298 OD306 No. of pockets Dimensions No. Magazines Pamphlets W" x H" /Each OD x 36 7/ OD x 22 5/ OD x 34 3/ OD x OD x OD x 20 3/ OD /4 x 10 1/ Dimensions No. of No. W" x D" x H" Shelves /Each OK x 12 x OK x 12 x OK x 12 x OK x 12 x PORTABLE LITERATURE DISPLAYS WOOD BOOKCASES Gables and shelves are 11/16" thick Fully assembled Constructed of heavy gauge steel Easy and ready to use, this portable literature rack is a breeze to set up Ideal for trade shows, stores, offices and reception areas Double-sided display features six literature pockets Dimensions: 9 7/8" W x 13 1/4" D x 59 1/4" H Folds down to 8" H; and weighs only 19 lbs. Metallic grey powder coat for style; resists scratchiness Comes with convenient carrying case with strap Carrying Case OK060 No. OG448 /Each $ Folded No. Dimensions Mahogany Black Honey Shelves W" x D" x H" /Each OK059 OK060 OK061 4 (3 Adjustable, 1 Fixed) 36 x 12 x OK062 OK063 OK064 5 (4 Adjustable, 1 Fixed) 36 x 12 x R33873E 1610 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

24 FILING & SYSTEMS LITERATURE RACKS OA130 OA156 Construction is of sturdy heavy gauge steel Provide a convenient and compact way to store literature Most models accommodate 150 standard 8 1/2" x 11" sheets, while others are wider to hold magazines and special forms OA163 OC543 OA148 OA155 Rotating Literature Racks Optional legs to permit free standing as illustrated are available for all literature Racks. OC547 OC549 OC553 No. Overall Openings Paper No. of Wt. Putty Grey Tan Black W" x D" x H" W" x D" x H" Width" Pockets lbs. /Each OC540 OA152 OA130 OC /4 x 4 1/8 x 65 1/2 8 5/8 x 3/4 x 8 1/2 8 1/ OC559 OA166 OA156 OA /8 x 4 1/8 x 58 1/2 12 1/8 x 1 x 8 3/ OC541 OA161 OA155 OC /4 x 4 1/8 x /8 x 3/4 x 8 1/2 8 1/ OC558 OA148 OA162 OA /4 x 4 1/8 x /8 x 1 x 8 3/ OC543 OA169 OA165 OC /4 x 4 1/8 x /8 x 3/4 x 8 1/2 8 1/ OC557 OA163 OA144 OA /8 x 2 x 26 1/4 12 1/8 x 5/16 x 5 5/ OC545 OA171 OA624 OC544 Optional Leg for 9 3/4" Wide s (Sold Individually) OC556 OA164 OA167 OC555 Optional Leg for 13 1/8" Wide s (Sold Individually) ROTATING LITERATURE RACKS OC553 OA149 OA179 OC /8 x 14 1/8 x /8 x 3/4 x 8 1/2 8 1/ OC549 OA134 OA158 OC /8 x 14 1/8 x 48 1/2 8 5/8 x 3/4 x 8 1/2 8 1/ OC547 OA145 OA128 OC /8 x 14 1/8 x 21 1/4 8 5/8 x 3/4 x 8 1/2 8 1/ WIRE LITERATURE DISPLAY RACKS Welded wire construction Open wire construction keeps material fresh, clean and easy to see Full-view front displays literature, magazines or forms for fast selection Generous 8 3/4" W x 1" D compartment size is ideal for 8 1/2" x 11" material Charcoal powder coat finish ROTARY FLOOR DISPLAYS Each layer rotates independently for easy selection Five dual wheel casters (2 locking) Compact knock-down design, ideal for trade shows No. OE632 Magazine Display No. OE807 Brochure Display R26154E Number of Dimensions Wt. No. Compartments W" x D" x H" lbs. /Each OE x 15 x OE x 15 x OE807 OE632 OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1611

25 KEY CABINETS & KEY CHAINS DOUBLE KEY FILE/SECURITY SYSTEMS Sturdy, welded steel with piano-hinged door and key panels Heavy-duty, 20-gauge steel body and 18-gauge steel door Mount cabinet on wall (mounting screws included), or use on table or shelf Cabinet includes a disc-tumbler lock with two keys Includes: red octagon key tags (model OG894) and white oval key tags (model OG895) same amount as key capacity, cross reference key guide, key loan record sheet, key receipt slip, brass key receipt holders and key collection envelopes The double key system insures proper security and avoids key loss How it works: the master key is fastened to the red tag and filed permanently on a labelled hook; duplicate keys are fastened to white tags on the same hook; each key is indexed in three ways: by hook number, alphabetically by what the key opens and numerically When a key leaves the system, a receipt tag is filled out and hung with the master key and all loans are recorded in the key loan record sheet OG893 KEY CABINETS Organize and control your office or warehouse with wall mounted key cabinets Heavy gauge steel construction with piano hinged doors and key panels provide a secure location for key storage Industrial 19-gauge body with 18-gauge door on all models except model OJ922, which has a 20-gauge body and 19-gauge door Durable beige powder coated epoxy finish All models come with numbered slots and key tags OJ924 OG888 Dimensions No. Description W" x D" x H" /Each OJ Key Cabinet 8 x 2 1/2 x OJ Key Cabinet 10 3/4 x 3 x 12 1/ OJ Key Cabinet 13 x 3 1/4 x OJ Key Cabinet 16 1/2 x 5 x OJ Key Cabinet 18 x 5 1/2 x OJ928 Key Tags 20/Pack 9.06 Dimensions Key Wt. No. W" x D" x H" Capacity lbs. /Each OG884 8 x 2 1/2 x 12 1/ OG x 3 1/8 x 17 1/ OG x 3 1/8 x 17 1/ OG /2 x 5 x 20 1/ OG /2 x 5 x 20 1/ OG /2 x 5 x 20 1/ OG /2 x 5 x 31 1 / OG /2 x 5 x 31 1/ OG /2 x 5 x 31 1/ EXTRA KEY TAGS & ACCESSORIES OG894 Key Tag, Red Octagon, Numbered, 20/Pack OG895 Key Tag, White Oval, Numbered, 20/Pack OG896 Key Collection Envelopes, 100/Pack OG898 Brass Receipt Holders, 100/Pack OG899 Key Loan Record Sheets, 24/Pack 8.53 OG897 Cross Reference Index Binder, 30 to 80 Keys OG903 Cross Reference Index Binder, 90 to 240 Keys OG904 Key Receipt Slips, 250/Pack 4.97 KEY RACKS Sturdy, lightweight, welded-steel key rack Mounts on walls and doors in offices or warehouses Dimensions: 13 3/4" W x 2 1/4" H Includes: Numbered key tags, "out key" control tags and mounting screws 20-key capacity No. OG902 /Each $20.05 DESK DRAWER KEY TRAYS Compact and portable, fits easily into most desk drawers and safes Convert your office desk drawer into a key control system Constructed of molded plastic, making it light and durable Accommodates 56 keys 8 panels with 7 hooks each Each hook includes two key tags, a self-locking tag for master keys and a standard snap hook key tag for duplicate keys Dimensions: 12" W x 9 7/8" D x 4 3/4" H Colour: Putty Weight: 5 lbs. No. OG900 /Each $ FILE DRAWER KEY RACKS Ideal for secure out-ofthe-way key control Sturdy, molded plastic, 40-key rack that comes complete with numbered key tags Clamps on back allows for easy attachment to rear of standard office file drawers and deep desk drawers Dimensions: 12" W x 1 3/4" D x 10" H Includes: Numbered key tags, "out key" control tags and key control chart No. OG901 /Each $38.14 OG900 OG901 R25921E 1612 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

26 SUPER48 TM KEY-BAK KEY CHAINS Exclusive quick-draw extension Choice of two cable types: Kevlar or stainless steel, both 48" Corrosion-proof polycarbonate casing 8 to 10-oz. retraction force Large split ring to hold many keys Belt clip on back ON541 has a leather belt loop Ideal for maintenance, janitorial, safety and security personnel Mfg. Cable No. No. Type /Each VE525 S48 Stainless Steel TLZ008 S48K Kevlar ON541 S48-LEK Kevlar KEY CABINETS & KEY CHAINS MID6 SERIES MID SIZE RETRACTORS #6 36" polyester cord Tough polycarbonate case 6-oz. retraction force 360 rotating clip 1" nickel plated split ring Holds 10 keys Belt clip Ideal for maintenance, janitorial, safety and security personnel Mfg. No. No. /Each ON SECURIT TM KEY-BAK KEY CHAINS 48" Kevlar cord Rugged carabineer makes securing the unit to almost anything easy Corrosion-proof polycarbonate casing SELF RETRACTING KEYCHAINS #487-HD 48" stainless steel cable Textured chrome front Stainless steel mounting bracket 8 to 10-oz. retraction force 1 1/8" diameter split ring Ideal for safety and security personnel Mfg. No. No. /Each TLZ B THE ORIGINAL KEY-BAK Stainless steel chain extends to 24" Pocket watch size Chrome texture finish 2 1/2 oz. weight With regular belt clip Mfg. No. No. /Each ON RETRACTABLE MINI-BAK ID BADGE HOLDERS 36" nylon cord Vinyl strap for identification cards (ID) Made of ABS plastic Tested in excess of 180,000 pulls 2-oz. retraction force Belt clip Ideal for maintenance and janitorial, safety and security personnel, identification and communication Mfg No. No. /Each TLZ Mfg. No. No. /Each ON ORIGINAL KEY-BAK SELF RETRACTING REELS #485-HDK 48" retractable Kevlar cord Chrome front 8 to 10-oz. retraction force 1 1/8" split ring Belt clip Ideal for maintenance, janitorial, safety and security personnel RETRACTABLE MINI-BAK KEY RINGS 36" nylon cord Made of ABS plastic 3/4" split ring Tested in excess of 180,000 pulls 2-oz. retraction force Ideal for maintenance and janitorial, safety and security personnel, identification and communication R32775E Mfg. No. No. /Each ON Mfg. No. No. /Each ON OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1613

27 TASK & OFFICE LIGHTS FLUORESCENT INDUSTRIAL- DUTY MAGNIFIERS KFM SERIES Patented internal 45" spring arm offers perfect balance and full adjustability 5" diameter, distortion-free lens Reflector optimizes light output and distributes illumination evenly across the work area Electronic ballast increases light output by 15% Secondary lens allows for a wide variety of magnification tasks 22 W bulb (included) is protected by a non-yellowing acrylic, splash guard/diffuser Colour: Light grey 5-year limited warranty No. XB951 3-diopter (1.75x) /Each $ No. XC617 5-diopter (2.25x) /Each $ REPLACEMENT LAMP No. XB172 /Case of 12 $84.22 MAGNIFIERS IFM SERIES Ideal medium-duty illuminated magnifier 5" diameter distortion-free lens in either 3-diopter (1.75x) or 5-diopter (2.25x) models Choice of 45" or 30" arm lengths Clamp or base mounts Fluorescent tube which provides shadow-free illumination Built-in starter, the switch does not have to be held down for several seconds to illuminate the tube 115 V AC Colour: Light grey Certified for sale in Canada by an accredited certification body Includes: Lamp diffuser cover, 3-wire cord, 22 W fluorescent tube XB947 XC225 RHINOMAG ILLUMINATED FLUORESCENT MAGNIFIERS 5" diameter, 3-diopter lens which magnifies 1.75x (for increased magnification, see auxiliary lenses below) Heavy-duty spring balanced arms extend 42" (107 cm) Instant on/off switch Bulb cover for safety Comes with 22 W circline fluorescent bulb, spring covers and an industrial duty clamp-on bracket "AA" No. XC510 /Each $ AUXILIARY LENSES XC512 5-Diopter Lenses, Replaces Supplied 3D Lens XC513 8-Diopter Clip-On Lens, to be Used in Conjunction with 3D or 5D Lens ILLUMINATED FLUORESCENT MAGNIFIERS 3-diopter, optical quality glass, stadium lens, 7.5" (19 cm) x 6" (15 cm) Heavy-duty metal spring balanced arms extend 42" (107 cm) Shade made of ABS plastic Two 9 W compact fluorescent bulbs included Each bulb is independently switched Includes: Industrial-duty clamp-on bracket "AA" auxiliary lenses No. XC511 /Each $ XC514 XC511 AUXILIARY LENSES: Distortion free optical quality clip-on glass lens. XC514 Increases Magnification by 4-Diopters XC515 Increases Magnification by 8-Diopters Mfg. Arm Mount No. No. Length" Diopter Type /Each XB LG 45 3D Edge XC LG 45 5D Edge REPLACEMENT LAMP No. XB172 /Case of 12 $84.22 Call us for all your Offi ce Product requirements! 1614 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING SWING ARM CLAMP-ON DESK LAMPS Spring arm adjusts to many positions Clamp to any surface Durable baked enamel finish Uses standard 100 W bulb (not included) Colour: Black Certified for sale in Canada by an accredited certification body XA982 Frame No. Colour Light Type /Each XA982 Black 100 W Incandescent XA983 White 100 W Incandescent REPLACEMENT BULBS No. Colour Light /Each XB117 Frosted 100 W 1.56 XB118 Clear 100 W 1.56 EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE R33397E

28 TASK & OFFICE LIGHTS 18 W TABLE LAMPS No. XC780 XC W FLOOR LAMPS XC780 Metal construction Base rotary switch Height: 27" Base diameter: 6.5" Bulb Dainovision 18 W CFL, included XC781 Mfg. No. DVN080-ASK DVN080-OBB /Each Colour Antique Satin Chrome Oil Brushed Bronze 50 W HALOGEN DESK LAMPS Mfg. No. DLHA111-SV No. XC782 XC783 XC782 Mfg. No. DVN080F-ASC DVN080F-OBB /Each Colour Silver /Each Desk lamp with heavy base and table clamp Rocker style switch Height: 20" Base diameter: 8" Bulb max. 40 W, G9, included XC785 /Each Colour Silver No. XC786 Mfg. No. DLH5001-SV 60 W DESK LAMPS 200 W EXECUTIVE WORK LAMPS Heavy base for good stability Height: 16" Base diameter: 8" Bulb max. 60 W, type A, not included Free-standing incandescent desk lamp Hi/Low switch to vary light intensity KD pleated shade and opaque glass diff user Height: 25" Base diameter: 7" Bulb max. 200 W, type A, DL200, included XC789 No. XC787 Mfg. No. HIL900-BK No. XC788 XC789 XC790 XC791 Gives equivalent light output to a 75 W incandescent Complete with heavy base and table clamp Arm extends approximately 36" Height: 43" Oval base: 7.5" x 9" Bulb max. 13 W mini fluorescent, included No. XC793 Mfg. No. ULT260-BK OFFICE _Eng.indd 1615 INSTRUMENTS, SCALES & XC791 Mfg. No. DM980-BK DM980-WH DM980-AB DM980-SC /Each Colour Black White Antique Brass Satin Chrome Can t find what you re looking for? /Each Colour Black SHIPPING & PACKAGING XC790 /Each Colour Black 13 W ENERGY EFFICIENT & FLEXIBLE DESK LAMPS R33396E Colour Antique Satin Chrome Oil Brushed Bronze 60 W DESK LAMPS All plastic construction Hi/Low switch allows two levels of light intensity Height: 22" Base diameter: 5" Bulb max. 50 W, 12 V halogen, included No. XC785 XC783 Metal construction On line foot switch Height: 59" Base diameter: 11" Bulb Dainovision 18 W CFL, included EQUIPMENT Call us today! METALWORKING SAFETY EQUIPMENT & JANITORIAL & MAINTENANCE MATERIAL HANDLING & :20 PM

29 GENERAL OFFICE CORKBOARDS Ideal for office or warehouse environments Sturdy aluminum frame Plastic-molded corners protect the boards and wall from damage Double-sided cork for added durability ON593 Wt. No. Dimensions lbs. /Each ON x ON x ON x ON x ON x CORKBOARD ACCESSORIES PUSH PINS Plastic head, assorted colours. 100/pkg. per package No. OJ472 /Each $2.79 CHALKBOARDS Smooth surface guarantees clear, legible writing and easy erasing. Natural aluminum frame; square corners. Green writing surface. Wt. No. Dimensions" lbs. /Each OA x OA x OA x OA x ACCESSORIES OC381 Chalk, White (12/bx) 2.45 OC383 Chalk Eraser 3.75 VISUAL COMMUNICATION FRAMES Standard or customized formats Completely waterproof; no maintenance necessary Part of poster that is hidden: 1/8" (3 mm) Maximum thickness of poster: 1/4" (6 mm) Overall size: poster's size + 3 1/4" (8 mm) Our frame can also be drilled for screw mounting All the frames are sold with a strong 3M adhesive for wall or window mounting Applications: indoor, outdoor, hanged, double-sided (on window) and on light-box Size: 8 1/2" x 11" Colour: Silver No. OG403 /Each $ COVERED DIRECTORY BOARDS Locking glass door on hinges provides a professional appearance, deters unauthorized access to messages. Felt grooved black surface. 1/4" plexiglass in aluminum frame. Dimensions Wt. No. H" x W" lbs. /Each OA x MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING DRY ERASE MESSAGE SIGNS Attention getting signs are a practical addition to any front office or reception area Durable porcelain on steel white board is ideal for use with magnets Floor display models have an 18" wide base that can be weighted down with water or sand For indoor or outdoor use A. ARROW DIRECTIONAL SIGNS Position sign up, down, left, or right; adjusts + or 45 No. Size" /Each OE x 17 3/4 x 64 1/ B. RECTANGULAR SIGNS Dry erase surface No. Size" /Each OE x 18 x C. OCTAGONAL SIGNS Dry erase surface No. Size" /Each OE /2 x 18 x WHITE BOARDS White writing surface provides clean, colourful display Effortless erasing, wipes clean with cloth or felt brush Aluminum frame Plastic corners for board and wall protection NON-MAGNETIC Wt. No. Dimensions" lbs. /Each ON x ON x ON x ON x ON x DURA-INK DRY ERASE INK MARKERS Industrial strength felt-tip ink markers for temporary marking applications Mark can be removed quickly and easily with dry rag, towel, or eraser No residue or ghosting after mark is removed on most industrial surfaces Suitable for any non-porous surfaces Will not scratch painted surfaces Suitable for surfaces that require a low-chloride /low halogen specification 1/8" bullet felt-tip makes solid, opaque, visible mark Ideal for: White board marking in offices and factories MANUFACTURING On production lines for temporary parts identification, quality control and record keeping At workstations for job requirements and work schedules FABRICATION Temporary marks for measurement and cutting Colour-coding or to identify various shifts or operators OE765 OE767 OE766 MAGNETIC Wt. No. Dimensions" lbs. /Each ON x ON x ON x PE773 Red 1.98 PE774 Black 1.98 PE775 Blue 1.98 PE776 Green 1.98 EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE R34853E

30 HOOK & LOOP FASTENERS Alternative to zippers, screws, snaps and bolts. One nylon strip consists of tiny hooks and another consisting of soft pliable loops. Simply press together to fasten and pull apart to open. Current applications include the apparel, furniture, packaging and printing industries. Available in peel and stick adhesive backed models or regular style (sew-on) models. OC439 OC471 GENERAL OFFICE SUGGESTION BOXES Locking suggestion box invites confidential ideas and comments Comes with 25 suggestion cards, two keys and front panel adhesive labels marked "Suggestions", "Comments" or "Key Drop" Set on tabletop or mount to any wall (hardware included) Suggestion card refill pack 25 cards/pack sold separately ( No. OE811) 7 1/8" W x 6" D x 8 1/2" H, with a 4 3/4" x 1/8" deposit slot Black powder coat finish No. OE810 /Each $67.26 SUGGESTION CARDS, 25/PKG No. OE811 /Each $8.48 OE811 Hook Loop Length White Black White Black Width" yds /Each PEEL & STICK (ADHESIVE BACKED) OC439 OC440 OC441 OC442 3/ OC500 OC501 OC502 OC OC447 OC448 OC449 OC450 3/ OC504 OC505 OC506 OC REGULAR - SEW-ON OC455 OC456 - OC458 3/ OC508 OC509 OC510 OC511 1" OC463 OC464 OC465 OC466 3/ OC512 OC513 OC514 OC515 1" ADHESIVE BACKED DOTS OC471 OC472 OC473 OC474 1/ OC475 OC476 OC477 OC478 3/ OC483 OC484 OC485 OC486 3/ MODE TM WOOD WALL COAT RACKS WITH HANGERS Organization for garments Wood side panels, in black or mahogany are connected by three matte silver bars which provide an additional storage shelf Includes: 12 brushed chrome theft deterrent hangers and mounting hardware No. Finished Product Black Mahogany Description Dimensions /Each OJ997 OJ998 36" with hangers 37 1/2" W x 17 1/2" D x 13" H OJ999 OK066 48" with hangers 49 1/2" W x 17 1/2" D x 13" H COAT/HAT RACKS A. SHELF RACKS WITH HANGERS Contemporary coat rack has 12 non-removable hangers; prevents loss or misplacement. Chrome finish. Mounting hardware included. Wt. No. Description lbs. /Each OE017 49" W x 14" D x 19" H A. C. D. B. & C. VALET COAT RACKS & HANGERS Available in plastic. Hangers are black finish with a plastic coated cross bar Available in 12 coat capacities. Heavy gauge steel cons truc tion. Hangers included B. No. Wt. Black Description lbs. /Each B. HANGERS OTJ331 Plastic, Black Finish, 12/Pack C. VALET COAT HANGERS OE Coat Valet " W x 15" D x 63" H D. STEEL COAT TREES All steel black coat tree. 63" high. Wt. No. Description lbs. Each OE843 Black OK065 Chrome R33898E OVER THE PANEL SINGLE HOOKS Versatile fit accommodates panels 1 1/2" up to 3 1/4" Rounded knobs protect fabrics, plastic coat hooks keep garments looking clean and wrinkle free Six per package Includes mounting hardware concealed within the hook No. ON529 Mfg. No. 4224BL /Each $ Call us for quantity pricing! OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1617

31 GENERAL OFFICE TIME CLOCKS Large, easy-to-read analog clock face LED display of year, month and date Automatic or manual printing Print window with light Automatically adjusts for Daylight Savings Time, short months, leap years and power outages Selectable for 4-digit imprint Built-in battery backup SPECIFICATIONS: Power Supply: Power Consumption: Ambient Temp.: Humidity: Dimensions: Weight: TIME CLOCK ACCESSORIES Card rack is adjusted for standard 8 1/4" long cards Fits 25 standard time cards Rack is adjustable to accommodate cards of different widths 110/120 AC ± 10% (50/60 Hz) Normal 3 W, Max. 12 W 14 F F (-10 C - 45 C) 10 % - 90 % (no condensation) 6 3/4" W x 6 1/4" D x 8" H (150 x 172 x 165 mm) 6 lbs. (2.7 kg) HN140 English Note: Available in 220/240 V AC on special order only TIME CLOCKS Manual or automatic print Selectable imprints: year (4 digit), month, date and time or notation Selectable print format: year, month and date or Julian date; day or date; AM/PM or 0-23 hours; regular minutes or 100 th of an hour Right or left side printing Desk or wall mount Fast, easy set-up of date, time, print format, etc. Easy-to-replace ribbon cartridge Easy-to-read LCD display Automatic adjustment for Daylight Saving Time Quartz clock accuracy Built-in lithium battery backup protects clock and program data in the event of power failure Fast, quiet dot matrix printing Selectable notations: RCV'D, SENT, FAX'D, VOID, PAID, CFM'D APR'D, CMPL'D, ORIGN, FILE SPECIFICATIONS: Power Supply: Power Consumption: Ambient Temp.: Humidity: Dimensions: Weight: 120 AC ± 10 %, 60 Hz Normal 3 W, Max. 6 W 14 F-113 F (-10 C - 45 C) 10 % - 90 % (no condensation) 5.5" W x 6.5" D x 6" H (150 x 140 x 165 mm) 4.2 lbs. (1.8 kg) HN164 English HA004 WALL CLOCKS 12/24 H BATTERY OPERATED 12" diameter round office wall clock 12/24 hour Glass face Black chrome frame No. HT072 /Each $38.35 BATTERY OPERATED 14" diameter quartz clock Silent quartz movement with second hand Use 1 AA battery Plastic face Chrome frame No. HT071 /Each $46.14 ELECTRIC CLOCKS 12" diameter round office wall clock 12/24 hour Plastic face Black frame No. HX019 /Each $67.27 TAKE-A-NUMBER SYSTEMS Provides fair, organized, efficient customer service Enhances the customer's perception of quality Assures customers their turn for service Used in supermarkets, retail stores, specialty shops, post offices, tourist information centres, travel bureaus, banks, hair salons, insurance companies, trade fairs, ticket sales offices, embassies, restaurants, and utility companies Kit includes: 2-number segment display Power supply (12 V AC) 6 rolls of yellow tickets (4000/roll) Dispenser (D900) Counter stand with sign Push buttons and wires (1+, 1-) No. OG421 /Each $ HT072 HT071 HX019 HA001 HA004 Card Rack HA Time Cards, English HA Time Cards, French HN141 Replacement Ribbon for Time Clock R20512E 1618 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

32 P-TOUCH LABELING SYSTEMS P-Touch electronic labeling system creates professional adhesive-backed labels for every business application. PT-2100 PC-CONNECTABLE LABELING SYSTEMS "USB Ready" to easily connect to your PC 16 character x 3 lines LCD display for easy viewing and editing Prints up to 5 lines in 4 fonts, 7 font sizes, 10 type styles and 92 different symbols Built-in auto templates and bar codes and ability to add graphics, logos, pictures and bar codes to easily create custom labels Print labels from Microsoft Word, Excel and Outlook Built-in memory: save up to 9 of your most commonly used labels Automatic cutter Preview key allows you to check your text before printing Tape sizes: 9/64", 1/4", 3/8", 1/2", 3/4" Operates on the included AC adapter or 6 AA alkaline batteries (not included) Includes: AD-24 AC adapter, 1/2" TZ black on white laminated starter tape, P-Touch Editor software, user manual and warranty No. OJ938 /Each $ AA BATTERIES, PACK OF 24 No. XB872 /Each $18.08 "TZ & TZE (ECO-FRIENDLY)" SERIES TAPE CARTRIDGES FOR P-TOUCH. ALL "TZ & TZE" SERIES TAPES ARE 8 M (26.2') LONG. No. Series Colour /Each 9 MM (3/8") OB648 TZe Black on Clear OB650 TZe Black on White OB651 TZe Blue on White OB655 TZe White on Black OB667 TZe Red on White MM (1/2") OB649 TZe Black on Clear ON443 TZe Black on White OB653 TZe Blue on White OB656 TZe White on Black OB657 TZe Black on Yellow OB668 TZe Red on White GENERAL OFFICE PT-2730 PC-CONNECTABLE "SIMPLY PROFESSIONAL" LABELING SYSTEMS Use as stand-alone labeler, or connect to PC or Mac via USB for added functionality Large, 16-character x 3 lines graphical display with vivid backlit design for easy viewing Creates big, bold, durable, laminated labels in a variety of colours and sizes - up to 24 mm wide New, built-in label collection feature offers pre-designed labels for files, office signage, shipping labels and more New download feature allows access to additional label collection files New text reminder feature recalls frequently printed words making label creation quick and easy Prints up to 7 lines of text on each label Select from 8 fonts, 10 type styles, and 17 frames Save and print up to 99 of your favourite labels Sleek, modern design with built-in automatic cutter Complete kit includes: AC adapter, P-touch Editor software and drivers, USB cable, 0.94" (24 mm) starter "TZ" laminated tape, user's manual No. OK204 /Each $ AA BATTERIES, PACK OF 24 No. XB872 /Each $18.08 No. Series Colour /Each 18 MM (3/4") OB661 TZe Black on Clear OB654 TZe Black on White OB663 TZe Blue on White OB662 TZe White on Black OB666 TZe Black on Yellow OB669 TZe Red on White MM (1") OB658 TZe Black on Clear OB659 TZe Black on White OB664 TZe Blue on White OB665 TZ White on Black OB660 TZe Black on Yellow OB670 TZe Red on White PT1650 CUSTOMIZABLE INDUSTRIAL HANDHELD LABELING SYSTEMS Durable and rugged handheld labeler uses new flexible ID tape and rotated print for cable wrapping and flagging, industrial strength laminated tapes for patch panel labeling and standard laminated tapes for faceplate labeling. Memory functions to store frequently used label designs, easy entry keyboard and large display for quick editing. Auto sizing, sequential numbering, repeat printing, and vertical style for quick labeling. Auto power off feature helps to save battery life. FEATURES Portable and rugged design Download custom templates (with a database), and graphics to internal, non-volatile memory Prints labels from 6 mm to 24 mm wide Built-in telecom/datacom templates - wire/cables, patch panels, faceplates Makes rotated, vertical and horizontal labels Prints industry-standard bar codes Uses easy-swap interchangeable TZe tape cassettes Includes: Extra strength and flexible ID TZe tapes, tape separator, batteries, rubber impact guards and carry case IDEAL FOR: Telecom/Cabling Asset Management Property Management Manufacturing General office No. ON547 /Each $ R33890E OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1619

33 GENERAL OFFICE FOLDING OFFICE CARTS Sturdy steel cart has two shelves, folds away when not needed, and quickly sets up for use Top shelf is 26" W x 15" D, lower shelf is 22" W x 15" D with a 1/4" rim Can be used as a beverage cart For compact storage, simply fold top and bottom shelves up, legs in, then fold top down Mobile on four 3" diameter dual wheel casters (two locking) Capacity: 30 lbs. per shelf No. OK023 /Each $ MOBILE REFRESHMENT CENTRES Ample storage capability for your day-to-day break room supplies Easily move the cabinet wherever it is needed in the office on four 2" swivel casters (2 locking) Wood laminate construction, double-door design with a fixed interior and storage shelf, a large heat-resistant counter top with a 1 1/4" raised lip to catch spills Work surface (top) dimensions: 21 1/2" W x 17" D Finished product dimensions: 23" W x 18" D x 31" H Shelf capacity: 60 lbs. Total capacity: 200 lbs. Easy assembly with cam-lock fasteners COMPACT REFRIGERATORS Danby's large capacity, classic compact fridges offer plenty of additional refrigeration in a compact footprint. Suitable for offices, dens and workshops, this 4.3 cu. ft. model includes Danby's patented Canstor beverage dispenser, full width freezer section and tall bottle storage. Large 4.3 cu. ft. capacity compact fridge Mechanical thermostat Make ice or store frozen items in the compact freezer section No hassle push button defrost Convenient Canstor beverage dispensing system 2.5 wire shelves for maximum storage versatility Tall bottle storage - great for large soda bottles Reversible door swing for convenient left or right hand opening Integrated door handle Smooth back design 20 1/2" W x 21 1/16" D x 32 11/16" H Weight: lbs. Available in White or Black with Stainless Steel OE400 White OM293 Black w/stainless steel COFFEE STIR STICKS OD036 Coffee stir sticks, 4 1/2" plastic, 1000/box 3.63 OD037 Coffee stir sticks, wood, 1000/box 3.95 GLASS DECANTERS OB828 Glass decanter OK077 Filters 1000/pkg MATERIAL HANDLING & JANITORIAL & MAINTENANCE OD036 OB828 SAFETY EQUIPMENT & METALWORKING OK018 Grey w/grey top OK019 Mahogany w/mahogany top OK020 Medium Oak w/white top COMMERCIAL-DUTY MICROWAVES MEDIUM-DUTY VOLUME 1000 Watts of power for fast heating, 120 V 1.2 cubic foot capacity easily accommodates prepackaged foods, single servings or up to a 14" platter Up to 10 programmable menu items simplifies cooking and ensures consistent results Five power levels User-friendly controls are easy to use making it ideal for self-serve sites Time entry option for added flexibility Digital display with countdown timer for simple operation and easy at-a-glance monitoring See-through door and lighted interior for easy monitoring of food without opening the door Removable air filter with automatic clean filter reminder protects oven components from grease laden air Durable Stainless Steel exterior and interior for easy cleaning 22" W x 19" D x 13 3/4" H Shipping weight : 48 lbs. cul us listed Limited 3-year warranty No. OD879 /Each $ MEDIUM-DUTY VOLUME 1000 Watts of power for fast heating, 120 V 1.2 cubic foot capacity easily accommodates prepackaged foods, single servings or up to a 14" platter Up to 100 programmable menu items simplifies cooking and ensures consistent results Five power levels X2 multiple quantity pad calculates the proper cook times for multiple portions User-friendly controls are easy to use making it ideal for self-serve sites Time entry option for added flexibility Digital display with countdown timer for simple operation and easy at-aglance monitoring Removable air filter with automatic clean filter reminder protects oven components from grease laden air Durable stainless steel exterior and interior for easy cleaning 22" W x 19" D x 13 3/4" H Shipping weight : 48 lbs. cul us listed Limited 3-year warranty No. OD880 /Each $ EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OK018 OFFICE R33900E

34 GENERAL OFFICE KITCHEN OE809 OD039 OE063 OE064 OE065 OD030 - OD031 OD034 OD030 Styrofoam cups 7 oz capacity, 1000/pkg OD031 Covers for 7 oz cups, 1000/pkg OD032 Styrofoam cups 9 oz capacity, 1000/pkg OD033 Covers for 9 oz cups, 1000/pkg OD034 Paper cups, conical, 4 oz cap. 200/pkg 3.36 OK074 Plastic cups, clear, 7 oz cap. 2000/pkg OK075 Plastic cups, clear, 10 oz cap. 1500/pkg OE809 Paper cup, dispenser, stainless steel OD039 Plastic plate 6", 125/pkg 7.95 OD040 Plastic plate 9", 125/pkg OE063 Plastic forks, 1000/box OE064 Plastic knives, 1000/box OE065 Plastic spoons, 1000/box OD045 Plastic teaspoons, 100/box OK076 Cutlery Sets (incl. knife, fork, salt, pepper, napkin) 500/Case OK078 Foam Plate 9", 500/Case OK079 Paper Plate 9", 1200/Case OK080 Sugar Packets, 3000/Case R33899E STRAWS 8" standard 500/box No. OD038 /Each $3.95 ALUMINUM FOIL Practical Dispenser Box 18" x 328' roll No. OD050 /Each $32.65 SERV-RITE II NORTH RIVER Serv-Rite II dispenser napkins are a favourite with fast-food establishments As each napkin is dispensed the next one is pulled in to place No cross-contamination you only touch the napkin you use 100% recycled paper A strong, absorbent high quality napkin Certified Processed Chlorine Free and Eco-Logo M and Green Seal certifi ed Endorsed by the Green Restaurant Association PACKAGING FILM Multipurpose, comes in a practical dispenser box 11" x 2500' roll No. OD048 /Each $20.05 JC013 Mfg. Ply Open Size Folded Size Napkins Dispenser No. No. Colour Ply Type L" x W" L" x W" /Case Options /Case JC Mocha 1 Full Emboss 13 x 12 5 x JC JC White 1 Full Emboss 13 x 12 5 x JC SERV-RITE LL NAPKIN DISPENSERS Constructed of ABS plastic, will not scratch or dent Designed for controlled distribution, therefore reducing waste The next napkin is pulled into position as each napkin is dispensed Hygienic, you only touch the napkin you use Allows up to 600 napkins Modern Smoke/Black dispenser fits with any décor Mfg. Dimensions Paper No. No. Colour L" x W" x H" Options /Each JC Smoke black 8 x 7.25 x JC013, JC CASCADES INDIVIDUAL TOWELS Double-ply sheets offer strength and absorbency Made from 100% recycled fibres Contains up to 60% post-consumer material North River products are certified Processed Chlorine-Free and EcoLogo M Mfg. Dimensions Sheets Rolls No. No. Colour Ply L" x W" /Roll /Case /Case JC White x UNIVERSAL ROLL TOWELS Long-lasting rolls minimize maintenance costs while maximizing service Embossing enhances hand feel and maximizes absorbency; fewer towels are used per hand dry Eco-Logo M certified, Green Seal certifi ed, and Chlorine Free Mfg. Dimensions Rolls Dispenser No. No. Colour Brand Ply L' x W" /Case Option /Case JC Natural Décor x 8 24 JC101, JC JC Ivory North River x 8 6 JC101, JC102, JC103, JC104 JC Natural Décor x 8 12 JC101, JC JC White Décor x 8 12 JC101, JC JC Mocha North River x 8 6 JC101, JC102, JC103, JC104 UNIVERSAL ROLL TOWEL DISPENSERS See-through construction allows quick and easy service checks High capacity reduces labour and maintenance costs No touch models help to control germs and reduce risks of cross-contamination JC030 JC031 SEE PAGE 343 FOR MORE DISPENSERS Mfg. Dimensions Paper No. No. Colour Description L" x W" x H" Options /Each JC Grey Roll towel 10.5 x 14.5 x 16 JC027, JC028, dispenser JC029, JC030, JC031 OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1621

35 WATER COOLERS OASIS WATER COOLERS Oasis water coolers are manufactured with a heavy gauge steel frame which provides durable and quiet operation. They feature a 5-year limited warranty on the sealed refri geration system and most component parts. All waterways are constructed of lead free materials and HFC 134A is used as a refrigerant. No CFCs are used. All units are standard tan sandstone finish. Drinking water temperature is 50 F/10 C. Certified for sale in Canada by an accredited certification body. WALL-MOUNTED COOLERS These units come in standard or compact models. All units are shipped with complete instructions and wall mounting brackets. Units should be installed with the nozzle 36 inches from the floor. Mfg. GPH Dimensions Wt. No. No. Description Capacity W" x D" x H" lbs. /Each OJ952 PLF4CM Compact 4 17 x 13 3/16 x OA061 P8M Standard 8 17 x 29 7/8 x OA536 P14M Standard x 29 7/8 x OA061 FREE-STANDING COOLERS COMPACT FREE-STANDING Attractive economical line suitable for applications in offices, shops or factories where space saving is critical. Mfg. GPH Dimensions Wt. No. No. Description Capacity W" x D" x H" lbs. /Each OA063 P3CP Compact 3 12 x 12 x 43 3/ OA064 P5CP Compact 5 12 x 12 x 43 3/ OA548 P10CP Compact x 12 x 43 3/ AGAINST-A-WALL OR FREE-STANDING COOLERS All plumbing connections are completely sealed within the cabinet, permitting flush-to-wall installation. OA063 Mfg. GPH Dimensions Wt. No. No. Description Capacity W" x D" x H" lbs. /Each OC709 P8FA Standard 8 17 x 14 x 43 3/ OA550 P14FA Standard x 14 x 43 3/ OC709 BARRIER FREE WHEELCHAIR COOLERS Designed specifically for easy access Wheelchairs fit under edge of water basin for comfort and convenience Instructions and wall mounting brackets included Drinking water temperature is 50 F/10 C 17 1/2 W" x 18 1/2 D" x 22 11/32 H" Mfg. Bubbler Valve GPH No. No. Type Cap. /Each OA059 P8AC 3 Electric Push Bars OA059 DRINKING WATER FILTERS FOR OASIS COOLERS Removes dirt, cloudiness, particles, unpleasant odours and taste Reduces chlorine by 97 %, lead between 95.9 % and 99 % and cryptosporidium and giardia cysts by % Works with all the Oasis water coolers listed on this page Includes brackets, complete filter and colour coded waterline connections Fast and easy-to-change refill cartridges with automatic shut-off valve inside the filter Designed to last 1500 gallons or approximately six months OG445 OG445 Filter OG446 Refill Cartridge R32768E 1622 MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE

36 WATER COOLERS VERSAFILLER TM WATER FOUNTAIN & BOTTLE FILLERS Enjoy the best of both water options; refreshing fountain water and a bottle filler unit for refillable bottles. Th e VersaFiller TM accomplishes both tasks with ease and simplicity, and puts your location at the top of the refillable bottle trend while making a bold statement about your concern for the environment. Th e VersaFiller TM is also designed for the future. The alcove and activation button contain Freshield TM, which utilizes a silver-based antimicrobial compound. This is ideal for work-place settings, schools, university locations, and any public building. Th e VersaFiller TM unit is available in two configurations. The ON557 (PWSBF) model can be retrofitted to existing OA059 (P8AC) coolers as well as Elkay's EZ8 models (some installation is required to connect this unit to existing P8AC models) providing an instant upgrade to those products already in the field. Th e ON557 (PWSBF) is also designed for simplicity of installation, requiring only water tubing connection to the host (P8), with no required electrical connections or separate drains. Th e VersaFiller TM can be purchased as a complete top and bottom combination as well, ON555 or ON556. ON556 STANDARD FEATURES: Waterways are lead-free in materials and construction Heavy-duty galvanized steel frame bolts directly to the wall Freshield TM antimicrobial compound Gauges: Panels: 22, frame: 16 ADA compliant for adult or child when properly installed Certified to NSF/ANSI Standard 61, Annex G (AB1953) 5-year limited warranty Mfg. Capacity Dimensions Weight No. No. Description GPH W" x D" x H" lbs. /Each ON555 P8SBF VersaFiller TM Combo Complete w/oa059, Sandstone Finish 8 24 x 36 x ON556 P8SBF VersaFiller TM Combo Complete w/oa059, Stainless Finish 8 24 x 36 x ON557 N/A VersaFiller TM Retrofit Kit for OA059, Fountain Only (See page 1622 for OA059) N/A 6 x 18 x BRITA HYDRATION STATION TM Th e Brita Hydration Station TM offers a convenient, touch-free alternative to bottled water, filling up reusable containers with healthier*, refreshing water. The unit conveniently mounts on to most wall surfaces and dispenses great-tasting, filtered water from standard tap lines. Simple to use Place a bottle beneath the nozzle and the Brita Hydration Station TM does the rest. Simply move your bottle in and up to fill, and down and out to turn off. The Brita Hydration Station TM turns itself off for a drip-free, spill-free experience. Touch-free, sensor-operated design allows the unit to be activated without physical contact by the user, assuring hygienic operation. * Certified to reduce lead and cysts. Substances reduced may not be in all users' water. FEATURES: Beautiful Satin Finish - aesthetically pleasing and modern design consisting of a 16-gauge type 304 brushed stainless steel back panel with a #4 satin finish and ABS front panel Touch-Free, Sensor Operation - simply place a bottle beneath the nozzle to dispense water; touch-free use assures hygienic operation Filter Replacement Indicator Light - the unit's front face features a filter reminder light; green is good, yellow indicates filter needs replacement soon, red indicates filter replacement is due Simple to Maintain - servicing the unit is simple with replacement filters utilizing a simple twist-on, twist-off replacement 30-Second Timeout - 30-second timeout feature prevents unauthorized use and malicious activation Lead-Free - the Brita Hydration Station TM features certified lead-free materials, components, and construction meeting AB 1953 and NSF/ANSI 61 Certifications - NSF/ANSI 61, NSF/ANSI 42, 53, AB1953, and CSA B Certified under IAPMO under the Drinking Fountain category Advanced Filtration System - the unit is certified to NSF/ANSI 42 and the only NSF/ANSI 53 drinking water system on the market, reducing lead, chlorine (taste/odor), and removes 99.99% of cysts 24-Hour Purge - self-activated 24-hour purge guarantees fresh water supply by regularly flushing out water line Chilled Water Option - add the optional chiller to help reduce the water temperature ON548 ON551 R32769E Mfg. Dimensions Weight No. No. Description W" x D" x H" lbs. / Each ON Brita Hydration Station TM Semi-Recessed 15 x 3.94 x ON549 HCR8 Remote Chiller for ON ON550 MTGFR.HSC Mouting Frame for Chiller ON ON SM Brita Hydration Station TM Surface Mount 15 x 6.94 x ON Drain Kit for ON551 Hard Plum Unit to Waste Line ON Replacement Brita Filter for ON548, ON OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1623

37 WATER COOLERS REPLACEMENT FILTER CARTRIDGES Single Action (Dirt/Rust) - hot and cold water filters are made of pure white cellulose fibres. 1" centre hole. Double Action (Taste/Odour, Dirt/Rust) - cold water only filter made of pure white cellulose fibres with activated carbon granules. For normal contamination. 1" centre hole. Double Action (Scale, Dirt/Rust) - uses annular grooves and the graded density cellulose of the Dirt/Rust cartridges plus a compound to inhibit scale. Extends the life of pipes, fixtures and appliances. Cold water only. 1" centre hole. BA590 BA592 BA591 BA593 Filter Maximum Flow/Rate/ Dimensions Degree Rating No. Type Temperature Cartridge (GPM) H" x Dia" of Filtration Microns /Each BA590 Single (Dirt/Rust) 210 F (99 C) 6 9 3/4 x 2 5/8 Normal BA591 Single (Dirt/Rust) 210 F (99 C) 6 9 3/4 x 2 5/8 Heavy BA592 Double (Taste/Odour, Dirt/Rust) 100 F (38 C) 3 9 3/4 x 3 Normal BA593 Double (Scale, Dirt/Rust) 100 F (38 C) 8 9 3/4 x 2 15/16 Normal ICE MAKER WATER FILTERS Triple action filtration provides sparkling clear ice cubes, fresh tasting water, coffee and beverages Protects equipment from scale and corrosion, reducing maintenance costs Effective taste, odor, chlorine removal Filters particulates as small as 5 microns 1/4" NPT connections, 1/2 GPM flow rate maximum BA609 Dimensions Max. Water Max. Water No. H" x Dia." Capacity Temperature Pressure /Each BA /8 x 2 1/ gal. 100 F (38 C) 125 PSI INDUSTRIAL WATER COOLERS Heavy-duty blow molded resin resists chips and dents in the toughest work area or job site Injection grade insulated liner material keeps your water or beverage cold Leak-resistant screw on lid Drip-resistant spigot Sturdy molded-in handles on the 10-gallon cooler Universal cup dispenser is available for 3-gallons and up, holds 200 cups Cups not included UNDER-SINK WATER FILTERS Compact 2 GPM cold water filter Filter included Maximum water temperature 100 F (38 C) 125 PSI Inlet/outlet size: 3/8" NPT BA605 NI653 NI655 No. Description Wt. lbs. /Each NI653 3 Gallons NI654 5 Gallons NI655 5 Gallons w/dispenser NI Gallons NI657 Universal Cup Dispenser MATERIAL HANDLING & JANITORIAL & MAINTENANCE SAFETY EQUIPMENT & METALWORKING Dimensions Filter Wt. No. H" x Dia." Type Filter # lbs. /Each DIRT/RUST BA /16 x 4 7/8 Taste/Odour BA / BA /16 x 3 3/8 Taste/Odour, Scale BA REPLACEMENT FILTER CARTRIDGES For Use No. Description with Housing /Each BA607 Taste/Odour, Dirt/Rust BA BA608 Taste/Odour, Dirt/Rust BA EQUIPMENT SHIPPING & PACKAGING INSTRUMENTS, SCALES & OFFICE R32770E

38 COOL MIST HUMIDIFIER CONSOLE Humidifies up to 1700 sq.ft. 8-gal. output, 6-gal. capacity Adjustable humidistat Runs up to 48 hours 2 portable tanks and wheels for easy mobility No. BB302 /Each $ " CLIP-ON & DESK FANS 2 speed, low and high settings Tilting head Fully assembled and ready for use Convertible clip and desk feature Weight: 2.21 lbs. No. EA525 /Each $23.50 Convertible Clip Included HVAC R34460E REPLACEMENT WICK FILTER No. BB312 /Each $13.39 DEHUMIDIFIER Flat panel design Top discharge side continuous drain hose connection Electronic controls with LED display Automatic defrost Low temperature operating to 39 F Water level indicator with LED and sound when tank is full Clean filter reminder with LED indicator Portable unit on casters allows for easy movement of the unit Capacity Coverage Dimensions Wt. No. Pints sq.ft. W" x D" x H" lbs. /Each EA /4 x 9 5/8 x 19 1/ EA /4 x 9 5/8 x 19 1/ EA /8 x 10 1/2 x 23 5/ EA /8 x 10 1/2 x 23 5/ ENVIROKLEAN TM AIR PURIFIER Reduces smoke, dust, pollen and other particles Independent ioniser to assist with particle removal Quiet 3-speed fan with high quality motor Washable pre-filter Filter change indicator Electronic filter change monitor on model EA124 Filters included EA122 Room No. Description Size sq.ft. /Each EA122 Tabletop EA124 Tower REPLACEMENT FILTERS No. Type /Each EA127 Enviroklean TM filter cartridge, 2/pkg W CERAMIC HEATERS WITH ADJUSTABLE THERMOSTAT 1500 W/5200 BTU ceramic heater Adjustable thermostat Thermal safety features Cool touch cabinet Built-in filter to collect dust 120 V No. EA467 /Each $59.95 EA124 OSCILLATING DESK FANS WITH PUSH BUTTONS 3-speed push buttons controls Rotating or fixed air direction Portable and easy to assemble Topple resistant base Weight: 6.83 lbs. No. EA305 12" diameter /Each $47.63 No. EA306 16" diameter /Each $ " OSCILLATING PEDESTAL FANS 3-speed push button front controlol Adjustable height Rotating or fixed air direction Easy to assemble Weight: lbs. No. EA307 /Each $91.79 MOBILE 3 IN 1 AIR CONDITIONER 3-speed fan Can be used as and air conditioner, a dehumidifier or a fan Programmable thermostat 24-hour programmable timer Sleep and auto mode Independent dehumidifying system shut down when tank is full No. EA BTU /Each $ RADIANT PLUG IN UNDER DESK HEATERS Safe comfortable radiant heat Extremely economical to operate - only draws 1.4 A Will not effect computer work stations Includes Velcro tabs and wire support hardware for easy installation Lighted on-off kick switch Built-in safety tip-over switch Pays for itself in energy savings! No. Volts Watts Amps Size" /Each BA x 22 x OFFICE INSTRUMENTS, SHIPPING & SAFETY JANITORIAL & MATERIAL SCALES & PACKAGING EQUIPMENT METALWORKING EQUIPMENT & MAINTENANCE HANDLING & 1625