FORT TASK SEATING. Economical Australian made task chair NOW WITH EXCLUSIVE LIVING BACK SET. Lic: C H S GECA Furniture and Fittings

Transcription

1 Economical Australian made task chair NOW WITH EXCLUSIVE LIVING BACK SET Lic: C H S GECA Furniture and Fittings

2 Specification The Fort provides the user with easily operated independent adjustments, gas height, back angle, and manual adjustable back height. Locking with hand wheel this entry level task chair is now standard with moulded seat foam with waterfall front to increase blood flow to the users legs. With a high content of recycled material, and AFRDI tested to level 6, the Fort series combines functionality and performance with value. Lowest carbon foot print guaranteed, produced in Sydney, Melbourne, Brisbane and Perth factories saving precious fossil fuels in transportation. Go green. Quick Ship Colour Options Corporate Grey, Navy or Black Operation SEMI (2 Lever) FULL ERGO (3 Lever) The Fort is an easily operated task chair with angled paddles for easy reach and manual adjustable back. Independently adjustable back angle Gas height adjustable seat Manual (hand wheel) back height adjustable for lumbar The Fort is an easily operated task chair with angled paddles for easy reach and manual adjustable back. Independently adjustable back angle Independently adjustable seat pitch Gas height adjustable seat Manual (hand wheel) back height adjustable for lumbar Min. 420 Max. 560 Min. 590 Max STANDARD HIGH BACK STANDARD MEDIUM BACK OPTIONAL DRAFTING KIT Compressed seat height of 420mm as per AFRDI and Australian Standards. * * Seat cushion 490w x 465d.

3 Materials Options Free wheeling castors - 50 mm twin wheel ring/stem, nylon/pp castor, AFRDI Soft tyre castors - twin wheel ring/stem, nylon/pp castor, AFRDI Base diameter, high pressure injection moulded glass filled nylon, 70% recycled, 100% recyclable AFRDI Gas lift - 140mm travel AFRDI Mechanism - steel construction, powder coated low VOC, euro hole pattern 170mm x 200mm. Two lever semi ergonomic with independent controls, manual back to regulate lumbar height to suit user AFRDI or three lever fully ergonomic with independent controls, manual back to regulate lumbar to suit user AFRDI Seat - ply 13-16mm thick, 9 ply laminate with water-based glue (not solvent). 14 T-nut as standard for Euro configuration plus injection moulded outer cover, PPO5 resin code, 100% recyclable. Back - Exclusive Living back inner/outer produced with 100% recycled plastic, 100% recyclable. Seat foam - Australian-made moulded seat FR CM2/5 combustion modified, H 55-60kg/m 3 density and 200 N hardness. AS/NZS Flammability. AS Density. Back foam - Australian-made cut foam. Design by - F. Rasera - Brado Italy. Back Medium back High Back Seat Standard seat 490w x 465 Height Standard 140 Gas Drafter, footring +270 Gas Castors Standard with 50 mm castors Base Black nylon reinforced standard Upholstery Quick ship in corporate navy, grey and black. All other fabrics available. AS/NZS 4438 LEVEL 6 TESTING INCLUDES STATIC LOAD TESTS kg on seat applied 20 times - 76 kg on back applied 10 times kg downwards on each arm applied 10 times - 60 kg outwards on each arm applied 10 times These AFRDI are TESTING overload tests AND and LOGO not to be considered as normal working loads. Testing criteria to go here. FATIGUE TEST LOADS - Carl 120 to kg provide. on seat cycled 200,000 times kg on back cycled 200,000 times SWIVEL TEST - 120kg on seat at 45 degree back and forward 100,000 times IMPACT TESTS - 25 kg dropped onto seat 20 times from height of 350 mm - Chair dropped from height of 450 mm 10 times with chair at an angle of 10 PREQUALIFICATION OF COMPONENTS INCLUDES Mech- 300,000 cycles with various loads Castors-100,000 cycles Star base-1.1tonnes

4 Certifications

5 The Environment The following table shows the end-of-life properties of the chair. MATERIAL TYPE CHAIR COMPONENT WEIGHT (KG) % RECYCLED COMPONENT % RECYCLABLE AFTER USE PLASTIC Castors % Not recyclable Back inner PPK % 100% Back outer PPK % 100% Paddles % 100% Seat outer PP % 100% 5 star base % 100% Dust cover % 100% STEEL Gas strut 1.2 0% 100% ALUMINIUM Ratchet Back bar.65 0% 100% 2 lever mech % 100% Rattle free screws % 100% FABRIC Sustainable Chelsea 0.3 0% 100% WOOD Ply seat (water based) % Not presently recyclable FOAM Moulded seat foam % 100% Cut back foam % 100% PACKAGING Plastic bag % Biodegradable Total % 83% End of Life The Fort is also recognised as an Earth Saver product. Fort also has Ecospecifier accreditation. The Fort has a full product stewardship programme for recycling at 4 locations, Sydney, Melbourne, Brisbane and Perth. Foams are crumbed and become carpet underlay Steel components are melted down for re-use Alloys are recycled All plastic and nylon parts are sorted into resin codes (eg. PPO5 or PPK20) for recycling

6 Delivery Options Chairs are available as pre-assembled units bagged for transportation or partly assembled and boxed. Box Dimensions (WxHxD) are: 590 x 690 x mm (0.17 cubic meter) BAGGED & READY TO GO PARTLY ASSEMBLED Assembly Instructions 1 ATTACH STRUT TO BASE 3 ATTACH BACK REST TO SEAT 2 SECURE WITH SUPPLIED BOLTS ATTACH SEAT TO STRUT 4

7 Instructions for use Sit in chair, if seat tilt is adjustable, adjust the seat so that it is approximately horizontal, to follow profile of the underside of thighs. Adjust the seat height so that your feet are resting flat on the floor. For good circulation your feet should take the weight of your legs. Adjust the forward-back movement of the backrest to give firm support while sitting upright. Adjust the height of the backrest to give support to the lumbar region of your back. Your forearms should slope gently down mid high of your keyboard when working at a desk. Chair may require adjusting during working day. For computer work, incline it slightly back, for writing work incline the seat slightly forward. Sitting upright, position the monitor screen viewing distance of 650mm, with midline screen height 100mm below eye level and angle screen at 5 degrees. If fitted with seat slide, adjust length/depth to give 50mm clearance for calves. Arm rest height should be 20mm below elbow levels. Information compiled by Terry Cunniffe Consultant Ergonomist Regular Care Backrest height adjustment 2/3 lever mechanism Backrest tilt Left hand side: Seat tilt adjustment (Fully Ergo model only) Seat height adjustment THIS QUALITY PRODUCT IS AUSTRALIAN MADE CASTORS GAS LIFT UPHOLSTERY - FABRICS Axle is pre-lubed for years of smooth running. Check that castors do not become clogged with carpet fibres. Cleaning No maintenance required. However, it is recommended adjusting the lift upwards and downwards to help lubricate. Protect from direct sunlight. Vacuum regularly using low suction. Please do not sit on back of chair. SPOT CLEANING Treat spills and stains as soon as possible Gently scrape any soil or mop any liquid from the surface of the fabric Do not scrub Apply proprietary cleaning agents strictly according to instructions to remove the residue of the spill Do not saturate the fabric or interior with water or other cleaning liquids May be spot cleaned with drycleaning fluid CLEANING Clean with hot water extraction machine (hot) Professional cleaning recommended Do not use dishwashing or laundry detergents Use only upholstery detergent Do not wet filling Dry in shade away from direct heat and sunlight Allow to dry thoroughly before re-use OR Clean using an on-site drycleaning machine (P) Professional cleaning only Do not wet filling with solvent Extract solvent thoroughly after application Wipe gently, do not rub CAUTION exhaust solvent vapour outside building. Provide adequate ventilation during cleaning and drying Allow to dry thoroughly before re-use Avoid use of room during drying period OR May be shampoo cleaned using upholstery shampoo Do not use dishwashing or laundry detergents Do not wet filling Wipe gently, do not rub Dry in shade away from direct heat and sunlight Allow to dry thoroughly before re-use