ILLUMINO TASK SEATING. The Australian made Illumino task, contemporary task. Lic: C H S GECA Furniture and Fittings

Size: px

Start display at page:

Download "ILLUMINO TASK SEATING. The Australian made Illumino task, contemporary task. Lic: C H S GECA Furniture and Fittings"

Prosper Hodge
5 years ago
Views:

1 The Australian made Illumino task, contemporary task Lic: C H S GECA Furniture and Fittings

2 Specification The Illumino provides the user with easily operated independent adjustments, gas height, back angle, seat tilt and easy ratchet back height adjustment, standard on architectural high arch base and Australian made moulded seat foam with waterfall front to increase blood flow to the users legs. With a high content of recycled material, and covered by GECA ecospecifier, earth saver and tested to AFRDI 6. Italian seat and back are made of recycled PPK20 plastic and are also recyclable. Lowest carbon foot print guaranteed, produced in Sydney, Melbourne, Brisbane and Perth factories saving precious fossil fuels in transportation. Go green. Quick Ship Colour Options Corporate Grey, Navy or Black Operation The Illumino provides the user with easily operated independent adjustments, Other features include: Independently adjustable back angle Independently adjustable seat pitch Gas height adjustable seat Ratchet back height adjustable for lumbar 530 Min. 590 Max. 840 Min. Max STANDARD HIGH BACK STANDARD MEDIUM BACK OPTIONAL DRAFTING KIT Compressed seat height of 420mm as per AFRDI and Australian Standards **Seat cushions 500w x 465d

3 Materials Options Free wheeling castors - 60 mm twin wheel ring/stem, nylon/pp castor, AFRDI Soft tyre castors - twin wheel ring/stem, nylon/pp castor, AFRDI Base diameter, high pressure injection moulded glass filled nylon, 70% recycled, 100% recyclable AFRDI Gas lift - 120mm travel AFRDI Mechanism - steel construction, powder coated low VOC, euro hole pattern170mmx200mm. Three lever Heavy Duty fully ergonomic with independent controls, ratchet back to regulate lumbar height to suit user AFRDI Seat - Essentia seat plastic PPK02 resin code, 100% recycled, 100% recyclable. No ply means zero formaldehyde. Back - inner/outer Flute. Back from 100% recycled plastic, 100% recyclable. Seat foam - Australian-made moulded seat FR CM2/5 combustion modified, H 55-60kg/m 3 density and 200 N hardness. AS/NZS Flammability. AS Density. Back foam - Australian-made AS/NZS flammability, AS density. Seat design - Mark Ayache, Ivars Design Italy AS/NZS 4438 LEVEL 6 TESTING INCLUDES STATIC LOAD TESTS kg on seat applied 20 times - 76 kg on back applied 10 times kg downwards on each arm applied 10 times - 60 kg outwards on each arm applied 10 times These are overload tests and not to be considered as normal working loads. Back Medium back High back Armrests Height adjustable black arms (low voc) No arms Height Standard 120 Gas Drafting, footring +270 Gas Seat Standard seat 500w x 465 Castors Standard with large twin wheel 60 mm castors Soft tyre friction twin wheel castors Glides - fixed non-roll Base Black nylon reinforced standard Polished aluminium Upholstery All fabrics available Quick ship colour options Corporate Grey, Navy and Black Special request Seat slide (50mm range) Lumbar pump (Recommended for people with back problems) FATIGUE TEST LOADS kg on seat cycled 200,000 times kg on back cycled 200,000 times SWIVEL TEST - 120kg on seat at 45 degree back and forward 100,000 times IMPACT TESTS - 25 kg dropped onto seat 20 times from height of 350 mm - Chair dropped from height of 450 mm 10 times with chair at an angle of 10 PREQUALIFICATION OF COMPONENTS INCLUDES Mech- 300,000 cycles with various loads Castors-100,000 cycles Star base-1.1tonnes

4 Certifications

The Environment The following table shows the end-of-life properties of the chair. MATERIAL TYPE CHAIR COMPONENT WEIGHT (KG) % RECYCLED COMPONENT % RECYCLABLE AFTER USE PLASTIC Castors 60mm 0.

5 The Environment The following table shows the end-of-life properties of the chair. MATERIAL TYPE CHAIR COMPONENT WEIGHT (KG) % RECYCLED COMPONENT % RECYCLABLE AFTER USE PLASTIC Castors 60mm % Not recyclable Back inner PPK % 100% Back outer PPK % 100% Seat inner PPK % 100% Seat outer PP % 100% Paddles % 100% 5 star base % 100% STEEL Gas strut 1.2 0% 100% ALUMINIUM Ratchet Back bar % 100% 3 lever mech 4.0 0% 100% Rattle free Screws % 100% FABRIC Sustainable Chelsea 0.3 0% 100% FOAM Moulded seat foam 1 0% 100% Moulded back foam % 100% PACKAGING Plastic bag % Biodegradable Total % 96% End of Life The Illumino is also recognised as an Earth Saver product. Illumino also has Ecospecifier accreditation. The Illumino has a full product stewardship programme for recycling at 4 locations, Sydney, Melbourne, Brisbane and Perth. Foams are crumbed and become carpet underlay Steel components are melted down for re-use Alloys are recycled All plastic and nylon parts are sorted into resin codes (eg. PPO5 or PPK20) for recycling

Box Dimensions (WxHxD) are: 590 x 690 x 410mm (0.

6 Delivery Options Chairs are available as pre-assembled units bagged for transportation or partly assembled and boxed. Box Dimensions (WxHxD) are: 590 x 690 x 410mm (0.17 cubic meter) BAGGED & READY TO GO PARTLY ASSEMBLED Assembly Instructions 1 ATTACH STRUT TO BASE 3 ATTACH BACK REST TO SEAT 2 SECURE WITH SUPPLIED BOLTS ATTACH SEAT TO STRUT 4

7 Instructions for use Sit in chair, if seat tilt is adjustable, adjust the seat so that it is approximately horizontal, to follow profile of the underside of thighs. Adjust the seat height so that your feet are resting flat on the floor. For good circulation your feet should take the weight of your legs. Adjust the forward-back movement of the backrest to give firm support while sitting upright. Adjust the height of the backrest to give support to the lumbar region of your back. Your forearms should slope gently down mid high of your keyboard when working at a desk. Chair may require adjusting during working day. For computer work, incline it slightly back, for writing work incline the seat slightly forward. Sitting upright, position the monitor screen viewing distance of 650mm, with midline screen height 100mm below eye level and angle screen at 5 degrees. If fitted with seat slide, adjust length/depth to give 50mm clearance for calves. Arm rest height should be 20mm below elbow levels. Information compiled by Terry Cunniffe Consultant Ergonomist Regular Care Backrest height adjustment 3 lever mechanism Seat tilt adjustment Backrest tilt Seat height adjustment THIS QUALITY PRODUCT IS AUSTRALIAN MADE CASTORS GAS LIFT UPHOLSTERY - FABRICS Axle is pre-lubed for years of smooth running. Check that castors do not become clogged with carpet fibres. Cleaning No maintenance required. However, it is recommended adjusting the lift upwards and downwards to help lubricate. Protect from direct sunlight. Vacuum regularly using low suction. Please do not sit on back of chair. SPOT CLEANING Treat spills and stains as soon as possible Gently scrape any soil or mop any liquid from the surface of the fabric Do not scrub Apply proprietary cleaning agents strictly according to instructions to remove the residue of the spill Do not saturate the fabric or interior with water or other cleaning liquids May be spot cleaned with drycleaning fluid CLEANING Clean with hot water extraction machine (hot) Professional cleaning recommended Do not use dishwashing or laundry detergents Use only upholstery detergent Do not wet filling Dry in shade away from direct heat and sunlight Allow to dry thoroughly before re-use OR Clean using an on-site drycleaning machine (P) Professional cleaning only Do not wet filling with solvent Extract solvent thoroughly after application Wipe gently, do not rub CAUTION exhaust solvent vapour outside building. Provide adequate ventilation during cleaning and drying Allow to dry thoroughly before re-use Avoid use of room during drying period OR May be shampoo cleaned using upholstery shampoo Do not use dishwashing or laundry detergents Do not wet filling Wipe gently, do not rub Dry in shade away from direct heat and sunlight Allow to dry thoroughly before re-use

FORT TASK SEATING. Economical Australian made task chair NOW WITH EXCLUSIVE LIVING BACK SET. Lic: C H S GECA Furniture and Fittings

FORT TASK SEATING. Economical Australian made task chair NOW WITH EXCLUSIVE LIVING BACK SET. Lic: C H S GECA Furniture and Fittings Economical Australian made task chair NOW WITH EXCLUSIVE LIVING BACK SET Lic: C H S 200 8 GECA- 28-2006 - Furniture and Fittings Specification The Fort provides the user with easily operated independent