SPLIT-SYSTEM CONDENSING UNITS. "HRC" Series SEER. Models H*RC018 thru H*RC060 Nominal Capacity: 18 thru 60 MBH DESCRIPTION FEATURES

Transcription

1 TG1Y (296) SPLIT-SYSTEM CONDENSING S "HRC" Series - 0 SEER Models H*RC018 thru H*RC060 Nominal Capacity: 18 thru 60 MBH DESCRIPTION The HRC Series condensing unit is the outdoor part of a versatile system of air conditioning. It is designed to be custom-matched with one of our complete line of evaporator sections, each designed to serve a specific function. Matching Air Handlers are available for upflow, downflow or horizontal application to provide a complete system. Electric heaters are available if required. Add-On coils are available for use with upflow, downflow or horizontal furnaces. FEATURES QUALITY CONDENSER S - The coil is constructed of copper tube and hardened aluminum fins for durability and long lasting efficient operation. The decorative 2" x 4" grille backed by the black coated fins, enhances appearance and protects the unit. PROTECTED COMPRESSOR - The compressor is internally protected against high pressure and temperature. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor which protect the compressor if undesirable operating conditions occur. A liquid line filter-dryer further protects the compressor. DURABLE FINISH - Cabinet is made of pre-painted steel. The pre-treated flat galvanized steel provides a better paint to steel bond, which resists corrosion and rust creep. Special primer formulas and glossy earth tone finish insure less fading when exposed to sunlight. LOER INSTALLED COST - Installation time and costs are reduced by easy power and control wiring connections. Discharge line heat exchanger knockouts are provided,if required. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof. Start-assist components included as standard where TXV is required. TOP DISCHARGE - The warm air from the top mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications. LO OPERATING SOUND LEVEL - The upward air flow carries the normal operating noise up away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds. LO MAINTENANCE - Long life permanently lubricated motorbearings need no annual servicing. EASY SERVICE ACCESS - Fully exposed refrigerant connections and a single panel covering the electrical controls and the molex plug in the control box connecting the condenser fan, make for easy servicing of the unit. SECURED SERVICE VALVES - Secured re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging. FOR DISTRIBUTION USE ONLY - NOT TO BE USED AT POINT OF RETAIL SALE

2 TG1Y CAPACITY - ith Air Handler Coils AIR HANDLER 2 2 ELECTRIC RATED NET MBH K SEER HEAT K CFM TOTAL SENS. TXV 1 EER 1 Phase HRC / NAH & NFA H1RC018 N2AHD10 5,8,10,13,15 16 G3HC G3HC H1RC024 N2AHD10 5,8,10,13,15 16 G3HC N4AHD14 5,10,15,20,25 22 G3HC N4NHD14 5,10,15,20,25 22 G3HC G3HC N2AHD14 5,10,15,20,25 22 G3HC N4AHD16 8,10,15,20,25,30 26 G3HC N4AHD16 8,10,15,20,25,30 G3HC N4AHD20 8,10,15,20,25,30 G3HC H1RC060 N4AHD20 8,10,15,20,25,30 26 G3HC Phase HRC / NVS - VARIABLE SPEED H1RC018 N1VSD10 5,8,10,13,15,20 G3HC ,8,10,13,15,20 G3HC H1RC024 N1VSD10 5,8,10,13,15,20 16 G3HC G3HC N1VSD10 16 G3HC ,8,10,13,15,20 N1VSD14 22 G3HC N1VSD14 5,8,10,13,15,20 22 G3HC G3HC N1VSD14 5,8,10,13,15,20 G3HC N1VSD20 5,8,10,13,15,20 G3HC N1VSD20 5,8,10,13,15,20 G3HC ,8,10,13,15,20 G3HC H1RC060 N1VSD20 5,8,10,13,15,20 22 G3HC AIR HANDLER 2 ELECTRIC HEAT K 1 Phase HRC / F1RP/F1RC RATED CFM NET MBH TOTAL SENS. H1RC018 F1RC024 5, 7.5, F1RP024 5, 7.5, H1RC024 F1RP030 5, 7.5, 10, F1RP036 5, 7.5, 10, F1RP036 5, 7.5, 10, Rated in accordance with DOE test procedures (Federal Register ) and ARI Standards 210. Cooling MBH based on 80 F entering air temperature, 50% RH, and rated air flow. K includes compressor, outdoor fan and indoor blower motor watts. Add-on coils include 365 watts/1000 CFM for blower motor. EER (Energy Efficiency Ratio) is the total cooling output in BTU s at a 95 F outdoor ambient divided by the total electric power in watt-hours at those conditions. SEER (Seasonal Energy Efficiency Ratio) is the total cooling output in BTU s during a normal annual usage period for cooling divided by the total electric power input in watt-hours during the same period. 1 Thermal Expansion Valve kit required on indoor coil to obtain system performance. (Start assist components included, except 060 model which does not require due to scroll compressor.) K SEER TXV 1 2 To meet Florida R=4.2 insulation code requirements, substitute N1FA for N2AH, N3FA for N4AH, G1FC for G3HC, F1FP for F1RP and F1FC for F1RC models. All ratings remain the same. 3 P2MP, P2MPV, and P2UR furnaces and FRP/FRC Air Handlers have B.O.D. standard. P1SP furnace requires B.O.D. accessory (#2FD ). ** Field transition may be required. = Not Applicable. EER 2 Unitary Products Group

3 CAPACITY - ith 80% Furnace and Coils RATED NET MBH K SEER # MBH CFM TOTAL SENS. TXV 1 EER 1 Phase H1RC / UPFLO & S P2MPD G3UA H1RC P2MPD M3UF P2MPD08 3 G3UA M3UF P2MPD M3UF H1RC024 P2MPD G3UA P2MPD P2MPD14 3 G3UA M3UF P2MPD M3UF P2MPD G3UA P2MPD14 3 G3UA M3UF P2MPD G3UA P2MPD P2MPD P2MPD P2MPD P2MPD P2MPD P2MPD P2MPD P2MPD P2MPD P2MPD P2MPD G3UA037 M3UF M3UF044 G3UA G3UA M3UF G3UA060 P2MPD H1RC060 P2MPD G3UA060 P2MPD G3UA061 See Notes on Page TG1Y G3UA M3UF SOUND RATINGS HRC SOUND RATINGS BELS H1RC CERTIFICATION APPLIES ONLY HEN USED ITH PROPER COMPONENTS AS LISTED ITH ARI Unitary Products Group 3

4 TG1Y CAPACITY - ith 90% Furnace and Coils RATED NET MBH K SEER # MBH CFM TOTAL SENS. TXV 1 EER 1 Phase HRC / UPFLO & S P2URD M3UF H1RC018 P2URD G3UA G1UA024S P2URD M3UF P2URD M3UF G3UA P2URD G1UA024S M3UF H1RC024 P2URD12 3 G3UA G1UA036S P2URD16 3 G1UA036S P2URD G3UA M3UF P2URD M3UF P2URD G3UA G1UA036S P2URD G1UA036S P2URD G3AU M3UF P2URD G3UA G1UA036S P2URD G1UA036S G3UA P2URD M3UF P2URD P2URD P2URD P2URD P2URD P2URD P2URD P2URD G3UA060 G1UA060S24 G3UA061 M3UF052 G3UA060 G1UA060S24 G3UA061 M3UF G3UA060 H1RC060 P2URD G1UA060S G3UA061 See Notes on Page Unitary Products Group

5 CAPACITY - ith 78% Furnace and Coils RATED NET MBH K SEER # MBH CFM TOTAL SENS. TXV 1 EER 1 Phase HRC / UPFLO & S H1RC018 P1SPD G3UA G1UA024S P1SPD G1UA024S P1SPD G3UA H1RC024 P1SPD12 G1UA036S P1SPD G1UA036S G3UA P1SPD G3UA G1UA036S G1UA036S21 P1SPD16 G3UA P1SPD G3UA G1UA036S G1UA036S21 P1SPD16 G3UA P1SPD P1SPD G1UA060S P1SPD H1RC060 P1SPD20 P1SPD20 See Notes on Page G3UA060 G1UA060S24 G3UA060 G1UA060S TG1Y CAPACITY - ith 78% Furnace and UF Coils ** RATED NET MBH K SEER # MBH CFM TOTAL SENS. TXV 1 EER 1 Phase HRC / UPFLO & S P1SPD M3UF P1SPD12 H1RC P1SPD16 M3UF M3UF P1SPD M3UF P1SPD16 M3UF See Notes on Page 2 Unitary Products Group 5

6 TG1Y CAPACITY - ith 80% Furnace and Coils # MBH 1 Phase HRC / HORIZONTAL & S H1RC018 P2HED12 40 ** 60 ** P1HDD12 47 ** 69 ** H1RC024 P2HED12 40 ** 60 ** P1HDD12 47 ** 69 ** P2HED12 40 ** 60 ** P1HDD12 47 ** 69 ** P2HED12 40 ** 60 ** P2HED16 80 ** 47 ** P1HDD12 69 ** P1HDD16 92 ** G3HC024 M3HD024 G3HC030 M3HD036 G3HC036 M3HD036 G3HC036 M3HD048 G3HC042 P2HED16 80 ** P2HED ** G3HC042 G3HC048 P1HDD16 92 ** M3HD048 P1HDD ** P2HED16 80 ** G3HC048 P2HED ** G3HC060 P1HDD16 92 ** M3HD048 P1HDD ** M3HD060 P2HED ** G3HC060 H1RC060 P1HDD ** M3HD060 1 Phase HRC/ HORIZONTAL AND S RATED CFM NET MBH K TOTAL SENS SEER TXV H1RC018 P2MPD G3HC P2MPD G3HC H1RC024 P2MPD G3HC P2MPD G3HC P2MPD G3HC P2MPD16 64, G3HC P2MPD16 64, P2MPD G3HC P2MPD20 80, P2MPD G3HC P2MPD16 64, G3HC P2MPD20 80, G3HC G3HC P2MPD G3HC H1RC060 P2MPD20 80, G3HC P2MPD M3HD See Notes on Page 2. EER Unitary Products Group

7 CAPACITY - ith 80% / 90% Furnace and Coils (continued) H1RC018 H1RC024 H1RC060 # MBH P2DPD10 48 P2CDD10 57 P2DPD08 48 P2CDD10 57 P2CDD12 64 P2DPD12 80 P2CDD12 80 P2DPD10 48 P2DPD12 64 P2DPD10 57 P2CDD10 57 P2CDD12 76 P2DPD12 64 P2DPD12 80 P2DPD16 80 P2CDD12 76 P2CDD16 97 P2DPD16 92 P2DPD P2CDD16 97 P2DPD16 80 P2DPD16 92 P2DPD P2DPD P2CDD16 97 P2DPD P2DPD P2CDD RATED NET MBH K CFM TOTAL SENS. 1 Phase HRC / DONFLO & S G3CN030 M3CF032 G3CN030 M3CF032 G3CN030 M3CF SEER TXV EER G3CN G3CN042 G3CN060 M3CF044 G3CN060 M3CF TG1Y G3CN Unitary Products Group 7

8 TG1Y CAPACITY - ith Variable Speed Furnaces (80%) OUTPUT RATED NET MBH SYSTEM SEER SEER MBH CFM TOTAL SENS. K /TXV 2 EER HRC / UPFLO S & S H1RC018 P2MPV12N G3UA G3UA G2UT P2MPV12N G3UA H1RC G2UT P2MPV14N G3UA G2UT G3UA P2MPV12N G2UT G3UA P2MPV14N G2UT G3UA P2MPV12N G2UT G3UA P2MPV14N G2UT P2MPV20N G2UT P2MPV20N G2UT G3UA H1RC060 P2MPV20N G3UA G2UA HRC / HORIZONTAL S & S H1RC018 P2MPV12N G3HC H1RC024 P2MPV12N G3HC P2MPV12N G3HC P2MPV14N G3HC P2MPV14N G3HC G3HC P2MPV20N G3HC G3HC P2MPV20N G3HC H1RC060 P2MPV20N G3HC See Notes on page 2, plus Notes below: N/A = Rating does not apply. TXV factory installed in coil. 5 Horizontal coil width is larger than furnace supply air opening width. Field transition is required. 8 Unitary Products Group

9 PERFORMANCE H1RC018 H1RC024 SUCT. T/P AIR TEMP ON CONDENSER SUCT. T/P AIR TEMP ON COMPR. 75 F 95 F 115 COMPR. 75 F 95 F 115 F TEMP. PSIG MBH K MBH K MBH K TEMP. PSIG MBH K MBH K MBH K H1RC NOTES: 1. For condensing unit only. Does not include effect of evaporator motor power or heat. 2. Performance based on 15 superheat and 15 sub-cooling at condensing unit. a. Increase capacity 1% for each 2 increase in sub-cooling. b. Decrease capacity 1% for each 2 decrease in sub-cooling. 3. Sub-cooling in excess of 20 may result in excessively high condensing temperature with air on condenser above 115. Maximum recommended condensing temperature is 140 F TG1Y Unitary Products Group 9

10 TG1Y DIMENSIONS All dimensions are in inches. They are subject to change without notice. Certified dimensions will be provided upon request. A C HRC REFRIGERANT DIMENSIONS CONNECTION LINE SIZE A 1 B C LIQUID VAPOR Includes fan guard B PHYSICAL AND ELECTRICAL DATA - (1 Phase) H1RC018 H1RC024 H1R060C SUPPLY VOLTAGE 208/ NORMAL VOLTAGE RANGE to 252 MIN. CIRCUIT AMPACITY MAX. OVERCURRENT DEVICE AMPS COMPRESSOR TYPE INERTIA INERTIA INERTIA INERTIA INERTIA INERTIA SCROLL COMPRESSOR AMPS RATED LOAD LOCKED ROTOR CRANKCASE HEATER NO NO NO NO NO NO NO FAN MOTOR AMPS RATED LOAD MIN. FIELD IRE SIZE AG 60 C COPPER CONDUCTORS MAX. IRE LENGTH FEET BASED 208V ON 3% VOLTAGE DROP 230V FAN DIAMETER INCHES RATED HP 1/12 1/12 1/12 1/6 1/6 1/6 1/4 FAN MOTOR NOMINAL RPM 1,100 1,100 1, NOMINAL CFM 1,850 1,850 1,850 3,300 3,300 3,300 3,450 FACE AREA SQ. FT ROS DEEP FIN / INCH LIQUID LINE OD 3/8 3/8 3/8 3/8 3/8 3/8 3/8 VAPOR LINE OD 3/4 3/4 3/4 3/4 7/8 7/8 1-1/8 CHARGE (LBS-OZ) CHARGE PER FOOT, OZ OPERATING EIGHT, LBS Utilization range A in accordance with ARI standard Dual element fuses or HACR circuit breaker. 3 The Unit Charge is correct for the outdoor unit, matched indoor coil and 15 feet of refrigerant tubing. For tubing lengths other than 15 feet, add or subtract the amount of refrigerant calculated, using the difference in length multiplied by the per foot value. 10 Unitary Products Group

11 ACCESSORIES Refer to Price Manual for specific model numbers. Compressor Blanket - Designed to further reduce the normal operating sound and is required to meet Canadian sound levels for units of three tons and below. Stub Adapters - Available to adapt sweat connect units to quick connect coils or sweat connect coils to quick connect units. Precharged Line Sets - Available in 15, 25, 35 and 50 foot lengths for connection of quick connect models. Outdoor liquid ends have F-6 connectors, vapor ends have F-11 connectors. Indoor liquid ends have M-6 connectors, vapor ends have M-11 connectors. All indoor vapor ends are provided with a 90 bend. A 30 foot line set with straight ends is available for splicing to other lines for longer runs. All vapor lines are insulated with 1/2 sponge rubber. Blower Time Delay - Available to increase efficiency when installed. Installs on indoor section and maintains blower for approximately one minute after cooling thermostat has been satisfied. Hard Start Kit (Single Phase Units) - provides required starting torque for used with thermal expansion valve TG1Y Outdoor Thermostat - 2TD Consists of an adjustable outdoor thermostat and relay in a vented enclosure. It provides additional second stage control of the supplemental resistance heat. (balance point control) Room Thermostats - One of the following thermostat may be used with these systems. 2ET Programmable electronic 1H/1C Manual change over. 2TH One Stage Heat / One Stage Cool, manual changeover, non-programmable TXV Kit - Must be used to obtain system performance. Not required with GHT or GUT coils which have TXV factory installed. Model Kit Req d. Model Kit Req d. H1RC018 1TV0601 1TV0602 H1RC024 1TV0601 1TV0603 1TV0602 1TV0603 H1RC060 1TV0604 TYPICAL INSTALLATION - HRC018 THRU " OVERHEAD CLEARANCE 18" SERVICE ACCESS CLEARANCE EATHERPROOF DISCONNECT SITCH THERMOSTAT TO OR AIR HANDLER TERMINAL BLOCK NEC CLASS 1 IRING NEC CLASS 2 IRING 10" CLEARANCE AREA TO INDOOR SEAL OPENING(S) ITH PERMAGUM OR EQUIVALENT CONTROL ACCESS PANEL NOTE: ALL OUTDOOR IRING MUST BE EATHERPROOF TYPICAL FIELD IRING ALL FIELD IRING TO BE IN ACCORDANCE ITH NATIONAL ELECTRICAL CODE (NEC) AND/OR LOCAL CODES POER IRING 208/ VOLT CONTROL IRING OR AIR HANDLER TERMINAL BLOCK C Y R G POER CONTROL FACTORY CONTACTOR TERMINALS GROUND SCRE HRC CONDENSING * Y R G * Terminal is only required on systems with heat. ROOM THERMOSTAT ALL OUTDOOR IRING MUST BE EATHERPROOF. USE COPPER CONDUCTORS ONLY. Unitary Products Group 11

12 MATCHING INDOOR COMPONENTS Add-On Coils - For Furnace Application Typical Applications ➀ UPFLO M3UF 3 6 ➀ UPFLO G1UA, G3UA or G2UT ➂ HORIZONTAL M3HD Air Handlers - For Non-Furnace Application F1RC or F1RP FAN S ➁ DONFLO G3CN ➁ DONFLO G3CF N1VS, N2AH N4AH or N1FA, N3FA BLOER G3HC or G1FC ➃ UPFLO ➅ HORIZONTAL ➃ UPFLO ➄ DONFLO ➅ HORIZONTAL Unitary Products Group P.O. Box 1592, York, Pennsylvania USA Subject to change without notice. Printed in U.S.A. Copyright by York International Corporation All Rights Reserved TG1Y Supersedes: TG1Y (1095)