Sonnet Cushions 2 Core Plush

Transcription

1 Sonnet Cushions 2 Core Plush sales@fortehealthcare.com.au fortehealthcare.com.au

2 Forté Sonnet Plush Cushions Forté Sonnet 2 Core Cushions Forté Sonnet Plush cushions provide deep profile pressure relief and luxurious patient comfort. 100% made in our New England facility, Sonnet Plush Cushions raise the standard of patient comfort without compromise on clinical effectiveness or suitability for facility usage. Sonnet Plush cushions are also used as a means to provide a higher seating height to assist patient ingress and egress from lounge seating. The Sonnet Plus range is available single or dual sided. Forté Sonnet 2-Core cushions are manufactured from extremely high performance, medical grade foams and provide sustained patient care and comfort. Graded to deliver both comfort, patient protection and support, the Sonnet range is the ideal choice for facilities seeking low cost, durable and compliant pressure relief cushions. TRIPLE LAYER SINGLE SIDED CORE High quality, open cell foam Anti-microbial treatment PREMIUM GRADE, MEMORY FOAM PATIENT INTERFACE LAYERS Pressure sensitive High temperature stability Visco-elastic cell structure provides excellent immersion and envelopment Laminated to both sides of cushion SUPPORTIVE MID-CORE REGION Delivers excellent postural comfort Provides graded immersion and support INTEGRATED ZIP Allows cover removal for cleaning purposes Protected by fluid ingress prevention flap Sonnet Cushion Single Side TRIPLE LAYER DUAL SIDED CORE APPLICATIONS Hospitals Aged Care Group Homes Home Care SUPPORTIVE BASE LAYERS Delivers excellent postural comfort Prevents patient from bottoming-out High quality, excellent durability High quality, open cell foam Anti-microbial treatment Padded on both sides of rail for maximum patient protection 4-way rotational PREMIUM GRADE, MEMORY FOAM UPPER Pressure sensitive High temperature stability Visco-elastic cell structure provides excellent immersion and envelopment SUPPORTIVE BASE LAYER APPLICATIONS Hospitals Aged Care Group Homes Home Care 2-CORE HIGH PERFORMANCE FOAM High quality, open cell foam Anti-microbial treatment Padded on both sides of rail for maximum patient protection HIGH FREQUENCY SEALED AND WELDED SEAMS Electromagnetically fused seams protecting against risk of penetration of fluid Meets and exceeds infection control requirements CODE CU51100 CU51101 CU51102 CU51103 CU51104 Sonnet Cushion Dual Side SIZE 400x x x x x500 4-WAY STRETCH, PRESSURE CARE MATERIAL (STANDARD) Vapour permeable and breathable Anti-shear Fire retardant, resistant to body fluids and bacteria Wipe-clean Optional: Heavy duty PVC material for maximum durability Delivers excellent postural comfort Prevents patient from bottoming-out High quality, excellent durability Sonnet 2-Core Cushions CODE SIZE ORIENTATION LABELING Ensures correct placement on surface Includes cleaning instructions and details CODE CU61100 CU61101 CU61102 CU61103 SIZE 400x x x x460 ROBUST SEAMS Heavy duty sewn seams Optional: high frequency sealed and welded seams CU31100 CU31101 CU31102 CU31103 CU x x x x x460 INTEGRATED ZIP Allows cover removal for cleaning purposes Protected by fluid ingress prevention flap CU x500 CU x500

3 PU1100 Medical Pressure Care Fabric - Technical Specifications Typical Applications General Medical Mattress Cover Aged Cared Mattress Covers General Hospital Ward Mattress Covers Features & Benefits Excellent Stretch Reduces Hammocking and material tension, Lowers interface pressure Breathable/Vapour Permeable Wicks away moisture from patients skin and reduces heat providing for improved skin micro-climate conditions. Excellent HF Welding Compatibility Allows covers to be sealed against fluid ingress at seams Barrier Fabric Allows care staff to Wipe-Clean, prevents ingress of body fluids* 95 High Wash Temperature Enhances infection control Total Weight 175 [+/-10] g/m² ISO 3801/ Weight of Fabric [PA] 85 [+/-5] g/m² ISO 3801/ Weight of Coating [PU] 90 [+/-5] g/m² ISO 3801/ Breaking Strength Warp 300 N/5cm ISO Breaking Strength Weft 160 N/5cm ISO Breaking Extension Warp 90% ISO Breaking Extension Weft 220% ISO Tear Strength Warp 35 N ISO 4674A Tear Strength Weft 30 N ISO 4674A Adhesion Warp 18 N/22mm DIN Adhesion Weft 20 N/22mm DIN Waterproofness before washing OK: 2000 G M D mm ISO 811:1981 High durability Excellent stretch Breathable/ vapour permeable Anti-Microbial protection Waterproofness after washing OK 2000 G M D mm ISO 811:1981 Shrinkage After Washing Warp [95 C] 0 [+/-6] % ISO Barrier Fabric Excellent HF welding capacity 95 High Wash Temperature Fire retardant Shrinkage After Washing Weft 0 [+/-3] % ISO [95 C] Flammability OK: Crib 5 BS 7175 (1989) Breathability 37 C / 65% R.H 600 g/m²/24h INVERTED CUP Mold and fungal resistance Cleaning and care: OK: Machine washable at 95 C. Do not bleach. Tumble dry low. Do not iron. Dry cleanable.

4 Cleaning Care Instructions PU-COATED FABRICS WASHING Washing (95 C) must be done with neutral detergents; softening agents are not allowed. Undyed fabrics may be washed following the ISO 6330 norm, part 9A and dyed fabrics following the ISO 6330 norm, part 3A. DISINFECTION In general our PU-coated products resist very well to alcohol-based disinfectants. Phenol or phenol derivates can also be used in diluted concentrations (follow the recommendations of the disinfectant manufacturer). Nevertheless, we always advise to test the concerning product before using it. High concentrations of active chlorine might have a negative effect on our PU-coated fabrics. Hence, its use is not recommended. If one does decide to use it, please use strongly diluted concentrations and rinse the cover extensively with water. The same is valid for peroxide-based disinfectants, and, in general, all disinfectants based on an oxidising reaction mechanism. A study of several surface disinfectants is available upon your request. Sterilisation might have a negative effect on polyurethane coatings and is therefore not recommended. If one does decide to do so, a reduced lifetime of the product should be taken into account. This is inevitable for all thermoplastic polyurethanes, due to their chemical nature. DRYING Adequate drying is a crucial factor in the care and maintenance of coated articles. Drying may be effected by hanging out, spinning or tumbling at temperatures up to 60 C. Do not press or mangle. STORAGE Store in a dry area, at room temperature. Avoid excessive pressure and contact with non-colourfast materials. Try not to expose the PU-coating to excessive sunlight (UV-radiation). PVC-COATED FABRICS WASHING Washing (40 C or 95 C) must be done with neutral detergents; softening agents are not allowed. Undyed fabrics may be washed following the ISO 6330 norm, part 9A and dyed fabrics following the ISO 6330 norm, part 3A. DISINFECTION In general, the PVC-coated products resist well to most of the currently used surface disinfectants. Nevertheless, we advise to test the particular surface disinfectant in advance or to contact us in case of doubts. It is not recommended to autoclave or sterilise PVC-coated products. DRYING Adequate drying is a crucial factor in the care and maintenance of coated articles. Drying may be effected by hanging out, spinning or tumbling at temperatures up to 60 C. Do not press or mangle. STORAGE Store in a dry area, at room temperature. Avoid excessive pressure and contact with non-colourfast materials. Try not to expose the PVC-coating to excessive sunlight (UV-radiation). BRAVO EXCEL & SIOEN CARE FABRICS WASHING Washing (95 C) must be done with neutral detergents; softening agents are not allowed. Undyed fabrics may be washed following the ISO 6330 norm, part 9A and dyed fabrics following the ISO 6330 norm, part 3A. Bravo Excel coatings can easily be washed > 100 times at 95 C (excluding possible physical damage of the coating due to contact with sharp metal parts in the washing machine). DISINFECTION In general, Bravo Excel coatings resist extremely well to all kinds of disinfectants. Nevertheless, we advise to test the particular surface disinfectant in advance or to contact us in case of doubts. Generally, surface wiping can be done numerous times without problems with the following commonly used products: Alcohol based disinfectants Phenol based disinfectants Disinfectants based on quaternary ammonium Active chlorine based disinfectants (> 100 times 5000 ppm) Please always keep in mind to rinse the cover extensively with pure water after using chlorine. Chloramine based disinfectants Peroxyde based disinfectants STERILISATION/ Bravo Excel coatings have the best possible resistance against AUTOCLAVATION autoclave sterilisation. They have been tested and approved after 50 cycles autoclave at 134 C. DRYING Adequate drying is a crucial factor in the care and maintenance of coated articles. Drying may be effected by hanging out, spinning or tumbling at temperatures up to 130 C (inlet temperature hot air). Bravo Excel coatings have been tested and approved after 50 cycles tumbler drying at 130 C. Do not press or mangle. STORAGE Store in a dry area, at room temperature. Avoid excessive pressure and contact with non-colourfast materials. Try not to expose the PU excel coating to excessive sunlight (UV-radiation).

5 Approved Cleaning Agents For All PU Coated Forte Fabrics Product ACTIMAX ALCO-DC-7 ALCO SANNI ARJO DISINFECTANT ASEPTI ACTIVE WIPES ASEPTIC ACTIVE LIQUID AZO MAX MULTI SURFACE WIPES AZO WIPE HARD SURFACE WIPES CIDAL DISINFECTANT CLEANER CLINELL HAND & SURFACE SANITISER DISIN- FECTANT CLINELL UNIVERSAL SANITISING WIPES DISPATCH DISINFECTANT DIVERCLEANSE ECOPINE ISOWIPES (KIMBERLY-CLARK) JUMBO LIV-WIPES LEGGSIDE HB (LEGGE SYSTEMS) LEMEX MEDIWIPES DISINFECTION (SULCO LIMITED) MULTIKLEEN NEUTRAL DETERGENT WIPES (REYNARD HEALTH SUPPLIES) NON ACID BATHROOM CLEANER (CERTO) OASIS PRO 12 CLEANER ODACON SPRAY PAL DETERGENT WIPES PAL DISINFECTANT WIPES (GLOBALMEDICS) PUREGREEN 24 (PURE GREEN) ROOM CARE R2L SPRING CLEAN (ECO LAB) STERRIMATT (PURE) FOAM SUPER SANI CLOTH- GERMICIDAL DISPOS- ABLE WIPES (PDI) SURFACE SANITISING WIPES Concentration 125ML: 4 LITRES WATER 5% ECOPINE (1:20 WATER) 5 % (1:20 WATER) 5% SPRING CLEAN (1:20 WATER) TRIGENE (BIO STRATEGY) TRIX (SOAP) TUFFIE 5 CLEANING WIPES TURBO CLEANER (SUREHANDS) USEALL (TRUE BLUE CHEMICALS) VIRACLEAN (WHITELY MEDICAL) VIREX (DIVERSEY) VIRKON (DUPONT) 5% VIRKON (1:20 WATER) IMPORTANT FOR ALL CLEANING PRODUCTS: Wipe off cleaning product residue with a clean, soft cloth and rinse with fresh warm water immediately after use. If particular cleaner/disinfectant is not listed we advise to test the particular surface disinfectant in advance or to contact us in case of any doubts. Please contact Forte Healthcare at or sale s@fortehealthcare.com.au

6 MEDICAL MATTRESS EXPERTS P W. fortehealthcare.com.au E.