Forced Convection Laboratory Incubators. Reliable Performance For Universal Applications. Forced Convection Laboratory Incubators

Transcription

1 Forced Convection Laboratory Incubators Reliable Performance For Universal Applications Forced Convection Laboratory Incubators

2 Forced Convection Laboratory Incubators Welcome to Esco Esco s Vision is to provide enabling technologies for scientific discoveries to make human lives healthier and safer. A leader in the development of controlled environment, laboratory and pharmaceutical equipment solutions. A world leader in biological safety cabinets. Esco has established offices in 13 countries such as Bahrain, China, India, Japan, Korea, Malaysia, Philippines, Singapore, UK, US, Vietnam, South Africa and Indonesia and is continually expanding. North American facilities in Pennsylvania; sales, service, logistics for US & Canada. Group total of more than 600 employees. Distributors in more than 100 countries. Products independently tested to international standards. Large R&D investments, world leading technologies. State-of-the-art production; vertically integrated manufacturing floor space. Worldwide service played out over a geographic expanse so broad that the sun never sets on what we do.

3 Global Network Forced Convection Laboratory Incubators Global Offices Distributors Products and Application Esco Life Science Tools Laboratory Equipment Medical Equipment Pharmaceutical Equipment Biosafety and Laminar Flow Fume Hoods Incubators and Ovens Assisted Reproductive Technology Containment / Compounding Pharmacy Class II Type A2 Biological Safety Cabinets Class II Type B2 Biological Safety Cabinets Class III Biological Safety Cabinets Horizontal Laminar Flow Clean Benches Vertical Laminar Flow Clean Benches Laboratory Animal Research Workstations PCR Cabinets Laboratory Fume Hoods Ductless Fume Hoods Fume Scrubbers Exhaust Blowers Fume Hood Airflow Monitors PCR PCR Thermal Cyclers Not Available in North America Forced Convection Laboratory Ovens Forced Convection Laboratory Incubators Refrigerated Incubators CO 2 Incubators Remote Monitoring, Data Logging, and Programming Software Cold Storage Ultra-low Temperature Freezers ART Workstations CO 2 Incubators with Suppressed O 2 Multi-room Incubators Downflow Booths Powder Weighing Balance Enclosures Pharmacy Isolators Cytotoxic Safety Cabinets Soft Capsule Air Showers Straddle Units Garment Storage Cabinets Pass Boxes Transfer Hatches

4 4 Forced Convection Laboratory Incubators Forced Convection Laboratory Incubators Introduction Introducing Esco Isotherm - world class laboratory incubators from Esco with the technologies and compliance to prove it. Ergonomic, intuitive interfaces, microprocessor PID controls with programming options, 4-zone heated air jacket, precisely tuned and tested ventilation and insulation package, all supported by Esco s solutions-based sales and service representatives worldwide. Key Features Solaris TM Pre-Heat Chamber Technology Isotherm Forced Convection Laboratory Incubators Reliable Performance For Universal Applications Extremely Uniform Thermal Distribution Innovative design guarantees maximum thermal performance. No exposed heating elements located inside the chamber to ensure maximum user safety. 4-zone heated air jacket ensures stable heating and maximum temperature uniformity in the chamber. Standard temperature range of up to 100 C for maximum application flexibility. Secure 2 point door seal and eccentric hinge ensure maximum gasket compression for stable chamber temperature. Isotherm Forced Convection Laboratory Incubators available in 5 sizes, 32L, 54L, 110L, 170L, 240L. Pre-heated air enters work chamber Gasket of outer door - for thermal decoupling Secure 2-point door seal Door Handle Pre-heat zone below work chamber Air supply from outside

5 Forced Convection Laboratory Incubators 5 VentiFlow Ventilation System - Forced convection design produces faster temperature response rates, improved uniformity, and reduced fluctuation. - German made ebm-papst fan, permanently lubricated, maintenance free for uniform air circulation. - Low energy consumption for reduced operating costs. - Fan speed and air exchange rates are adjustable. - Consistent air circulation and heat uniformity. - Low noise during operation. - Fresh air entry from the base of the chamber, combined with the rounded corners of the chamber interior and air exhaust at the rear of the chamber, creates uniform air circulation ensuring maximum temperature uniformity. - Chamber fan inlet pulls air away from the user, preventing the user from being exposed to blasts of hot air when the door is opened. Quality Esco Construction - Electrogalvanized steel with white oven-baked epoxy-polyester antimicrobial powder-coated finish. - External surfaces are powder coated with Esco to eliminate 99.9% of surface bacteria within 24 hours of exposure. Isotherm Forced Convection Laboratory Incubator Superior Insulation - Multi-layer chamber, pre-heat chamber, insulation and external carcass. - Improves chamber temperature stability, while reducing external surface temperatures. - Superior insulation performance reduces heat load output to the laboratory, reduces operating power consumption, and lowers operating costs.

6 6 Forced Convection Laboratory Incubators CONTROLLER TYPE SmartSense Microprocessor PID Control Technology LED Indicators Indicate condition of equipment during heating. Actual and Set Point Displays Show actual temperature and temperature set point at the same time. Independent adjustable over-temperature thermostat Protects the equipment against overheating. Airflow Adjuster Opens / closes rear exhaust vent to adjust airflow for varying applications. Function Keys For temperature, alarm, program and other settings. Main Power Switch Conveniently accessible. Instrument-grade precision platinum temperature probe. Tuned PID control ensures fast ramp time, prevents overshoot, and ensures stable temperature once setpoint is achieved. Twin temperature displays for easy monitoring. Built-in menu is intuitive, easy to operate; left display shows parameter being set, and right display shows preset value. User programmable alarm setpoints. Display temperature units selectable between C / F. User programmable PIN to prevent unauthorized use. Anywhere from 10 programs with 5 segments to 1 program with 50 segments may be configured. Programs may be set up to repeat automatically. Audible confirmation of all settings. Diagnostic functions provide access to chamber historical temperatures and sensor read-outs to simplify service. Diagnostic LEDs on electronics PCB simplify service. Wide Range of Program Options o C o C Sample Program 1 Repeats of identical processes based on user s setting of start temp, arrival temp, and running time after arrival. All settings can be done in a single program. For example, repeat a process from 50 C to 70 C and back. Sample Program 2 Running different processes sequentially based on user s setting of start temp, arrival temp, and running time after arrival. Different programs may be linked to extend the total number of sequences, thus creating virtually unlimited programming options.

7 Forced Convection Laboratory Incubators 7 Voyager Remote Monitoring, Datalogging, Programming Software Esco Voyager is a PC-based software package developed for the remote monitoring, datalogging, and programming / device configuration of Esco thermostatic products. Voyager interfaces with individual Esco equipment over RS485 using the EscoBUS communications protocol. Up to 16 devices of equipment may be interfaced to a single PC. Compatible Equipment Lexicon Ultra-low Temperature Freezer (with U-Series Controller) CelCulture CO 2 Incubator (CCL) CelMate - CO 2 Incubator (CLM) Isotherm Forced Convection Oven (OFA) Isotherm Forced Convection Incubator (IFA) Isotherm Low Temperature Incubator (IFC) OTHER SUPERB FEATURES Forced Convection Laboratory Incubators Applications APPLICATION MATERIAL/ SAMPLE APPLICATION MATERIAL/ SAMPLE Bacterial research Bacteria Gene cloning Bacteria, cells Microbiology Coliform determination Microorganisms, cells Bacteria Pharmaceutical stability testing Food and beverage Various Various Histology Tissue BOD / water pollution Water Paraffin embedding Paraffin Yeast growth Yeast Egg incubation Eggs Heated storage Media, samples Safe, Superior Protection for Sample, User and the Environment Multiple redundant over-temperature protection systems to guarantee maximum sample and user protection. Electronic over-temperature protection built into the microprocessor. Redundant mechanical over-temperature protection, adjustable from the front, independent from the microprocessor. Overall temperature protection meets DIN Class 3.1. Red LED illuminates if external mechanical temperature protection is engaged. Controller will control temperature at the over temperature setpoint. All electrical components are UL recognized. Electrical circuit protection in accordance with UL requirements.

8 8 Forced Convection Laboratory Incubators Ergonomic Design Access for Temperature validation and mapping Access port Optional Stainless steel Exterior Back View RS485 Communication Port Corrosion resistant surface. Robust construction. Meets pharmaceutical & clinical laboratory requirements. The RS485 provides serial communication port for PC. It can be daisy chained from product to product and connected to a PC. Ergonomic Door Handle with Keylock Ergonomic door handle, operation is gravity assisted. Door keylock prevents unauthorized access to sensitive samples. Easy-to-Clean Cleanroom design with minimal joints and crevices is easy to clean. Single piece stainless steel chamber with rounded corners. Glass door is dismountable without tools for easy cleaning. Easy-to-Service - Diagnostic functions in the microprocessor include historical read-out of temperatures. - Diagnostic menu provides read-out of all sensor inputs and controller settings. - Service can be carried out from the front. - All electronic components are isolated from the work chamber and easily accessible for replacement. - Low service costs.

9 Forced Convection Laboratory Incubators 9 Options and Accessories Wall bracket (only for 32L and 54L chambers) Accommodates desired operating heights. Support stands fixed height at 703 mm (27.7 ) Reversed door swing (factory installed) Voyager Software Kit Esco Voyager is a PC-based software package developed for the remote monitoring, datalogging and programming / device configuration of Esco controlled environment laboratory equipment. Additional shelf Two shelves are included for 32L, 54L,110L,170L and 240L models as standard. Additional shelves may be ordered TESTING AND CERTIFICATION Esco Isotherm Laboratory Incubators were tested, validated and have passed the calibration conducted by Biomedis, an ISO/IEC17025 accredited testing laboratory. The measuring installation used for calibration are regularly calibrated and traceable to the national standards of the German Federal Physical Technical Institute (PTB). The calibration was performed in accordance with ISO DIN Ordering Information UNIT ORDERING Models ifa-32-8 ifa-32-8-ss ifa-54-8 ifa-54-8-ss ifa ifa ss ifa ifa ss ifa ifa ss Description Isotherm General Purpose Incubator, 32L, VAC 50/60Hz Isotherm General Purpose Incubator, Stainless Steel Exterior Cabinet, 32L, VAC 50/60Hz Isotherm General Purpose Incubator, 54L, VAC 50/60Hz Isotherm General Purpose Incubator, Stainless Steel Exterior Cabinet, 54L, VAC 50/60Hz Isotherm General Purpose Incubator, 110L, VAC 50/60Hz Isotherm General Purpose Incubator, Stainless Steel Exterior Cabinet, 110L, VAC 50/60Hz Isotherm General Purpose Incubator, 170L, VAC 50/60Hz Isotherm General Purpose Incubator, Stainless Steel Exterior Cabinet, 170L, VAC 50/60Hz Isotherm General Purpose Incubator, 240L, VAC 50/60Hz Isotherm General Purpose Incubator, Stainless Steel Exterior Cabinet, 240L, VAC 50/60Hz

10 10 Forced Convection Laboratory Incubators Ordering Information Accessories ORDERING Accessories TOA-1005 TOA-1006 TOA-1007 TOA-1008 TOA-1009 TOA-1010 TOA-1011 TOA-1012 TOA-1013 TOA-1014 TOA-1018 TOA-1019 Description Wall bracket for IFA-32-8 Wall bracket for IFA-54-8 Support stand, 703mm (27.7 ) for IFA-32-8 Support stand, 703mm (27.7 ) for IFA-54-8 Support stand, 703mm (27.7 ) for IFA Support stand, 703mm (27.7 ) for IFA Support stand, 703mm (27.7 ) for IFA Additional shelf, for IFA-32-8 Additional shelf, for IFA-54-8 Additional shelf, for IFA Additional shelf, for IFA Additional shelf, for IFA Voyager software kit Technical Specifications IFA 32L, 54L, 110L 550mm / 550mm / 710mm (21.7 / 21.7 / 28.0 ) 437mm / 527mm / 587mm (17.2 / 20.7 / 23.1 ) 8 615mm / 695mm / 785mm (24.2 / 27.4 / 30.9 ) 320mm / 400mm / 490mm (12.6 / 15.7 / 19.3 ) Control Panel 2. Door Handle 3. Door Key Lock 4. Shelves 5. Air Exhaust 6. Fan 7. Glass Door 8. Power Supply Inlet 9. RS485 Communication Port 10. Access Port 400mm / 400mm / 560mm (15.7 / 15.7 / 22.0 ) 210mm / 300mm / 360mm (8.3 / 11.8 / 14.2 ) IFA 170L & 240L 740mm / 800mm (29.1 / 31.5 ) 250mm / 340mm / 400mm (9.8 / 13.4 / 15.7 ) 800mm / 827mm (31.5 / 32.6 ) 910mm / 1030mm ( 35.8 / 40.6 ) 580mm / 700mm ( 22.8 / 27.6 ) 580mm / 640mm (22.8 / 25.2 ) 460mm / 487mm (18.1 / 19.2 ) 500mm / 527mm (19.7 / 20.8 )

11 Forced Convection Laboratory Incubators 11 General Specifications Forced Convection Laboratory Incubators IFA-32-8 / IFA-32-8-SS* IFA-54-8 / IFA-54-8-SS* IFA / IFA SS* IFA / IFA SS* IFA / IFA SS* Volume 32 liter (1.13 cu.ft) 54 liter (1.91 cu.ft) 110 liter (3.88 cu.ft) 170 liter (6.00 cu.ft) 240 liter (8.48 cu.ft) Temperature Range Ambient +7.5 C to 100 C Temperature Variation Per DIN Spatial Uniformity Temperature Fluctuation Per DIN Control Fluctuation Heating up time Recovery time after door opened for 30 sec at 37 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 50 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 37 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 50 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 37 C 29 minutes 34 minutes 40 minutes 44 minutes 50 minutes at 50 C 36 minutes 50 minutes 68 minutes 45 minutes 74 minutes at 37 C 6 minutes 4 minutes 8 minutes 1 minutes 4 minutes at 50 C 8 minutes 10 minutes 13 minutes 2 minutes 5 minutes Electrical data ( V, AC, 50/60Hz, 1Ф) Power consumption at 37 C Power consumption at 50 C Maximum Power Consumption** 43 W 49 W 58 W 51 W 67 W 77 W 83 W 98 W 110 W 115 W 779W 919W 1097W 1248W 1255W Noise level 49 db 48 db 49 db 51 db 51 db Incubator Construction Number of Shelves Main Body Electrogalvanized steel with white oven-baked epoxy-polyester powder-coated finish Chamber Stainless steel, grade 304 Standard Maximum Maximum Load Per Shelf 15 kg (33 lbs) 15 kg (33 lbs) 30 kg (66 lbs) 30 kg (66 lbs) 30 kg (66 lbs) External Dimensions (W x D x H) 550 x 437 x 615 mm 21.7" x 17.2" x 24.2" 550 x 527 x 695 mm 21.7 x 20.7 x x 587 x 785 mm 28 x 23.1 x x 800 x 910 mm 29.1 x 31.5 x x 827 x 1030 mm 31.5 x 32.6 x 40.6 Internal Dimensions (W x D x H) 400 x 250 x 320 mm 15.7" x 9.8" x 12.6" 400 x 340 x 400 mm 15.7" x 13.4" x 15.7" 560 x 400 x 490 mm 22 x 15.7 x x 500 x 580 mm 22.8 x 19.7 x x 527 x 700 mm 25.2 x 20.8 x 27.6 Net Weight 45 kg (99 lbs) 55 kg (121 lbs) 79 kg (174 lbs) 118 kg (260 lbs) 144 kg (318 lbs) Shipping Weight 57 kg (126 lbs) 69 kg (152 lbs) 98 kg (216 lbs) 140 kg (309 lbs) 166 kg (366 lbs) Shipping Dimensions, Maximum (W x D x H) 620 x 530 x 840 mm 24.4 x 20.9 x x 620 x 920 mm 24.8 x 24.4 x x 680 x 1020 mm 30.7 x 26.8 x x 900 x 1100 mm 35.4 x 35.4 x x 900 x 1200 mm 35.4 x 35.4 x 47.2 Shipping Volume, Maximum 0.37 m 3 (13.1 cu.ft) 0.49 m 3 (17.3 cu.ft) 0.61 m 3 (21.5 cu.ft) 0.89 m 3 (31.4 cu.ft) 0.97 m 3 (34.3 cu.ft) Note: All technical specifications are specified for units with standard equipment at an ambient temperature of 25 C and a voltage fluctuation of ±10%. The temperature data are determined in accordance with DIN 2880 standards as per factory type test condition. Esco reserves the right to alter technical specifications at all times. * Stainless steel exterior option is avaiable for all sizes. ** In order to calculate the current at maximum power consumption, divide maximum power consumption by the voltage. Standards Compliance Temperature Safety DIN Class 3.1 Electrical Safety UL , USA; CAN/CSA-22.2, No ; EN , Europe; IEC , Worldwide

12 Forced Convection Laboratory Incubators Biological Safety Cabinets Compounding Pharmacy Equipment Containment / Pharma Products CO 2 Incubators Ductless Fume Hoods In-Vitro Fertilization Workstations Lab Animal Research Products Laboratory Fume Hoods Laboratory Ovens and Incubators Laminar Flow Clean Benches PCR Products Ultra-low Freezers Since 1978, Esco has emerged as a leader in the development of controlled environment, laboratory and pharmaceutical equipment solutions. Products sold in more than 100 countries include biological safety cabinets, compounding pharmacy equipment, containment / pharma products, ductless fume hoods, in vitro fertilization workstations, lab animal research products, laboratory fume hoods, laboratory ovens and incubators, laminar flow clean benches and PCR products and instrumentation. With the most extensive product line in the industry, Esco has passed more tests, in more languages, for more certifications, throughout more countries than any biosafety cabinet manufacturer in the world. Esco remains dedicated to delivering innovative solutions for the clinical, life science, research and industrial laboratory community. Biological Safety Cabinets and Laminar Flow Laboratory Fume Hoods Laboratory Ovens Laboratory Incubators PCR Thermal Cyclers Microplate Shaker/Incubators Ultra-low Freezers Esco Technologies, Inc Turnpike Drive, Units Hatboro, PA 19040, USA Toll-Free USA and Canada Tel Fax us.escoglobal.com usa@escoglobal.com Esco Micro Pte. Ltd. 21 Changi South Street 1 Singapore Tel Fax mail@escoglobal.com _Lab Incubators_IFA_A4_vC_08/12 Esco can accept no responsibility for possible errors in catalogues, brochures and other printed materials. Esco reserves the right to alter its products and specifications without notice. All trademarks and logotypes in this material are the property of Esco and the respective companies. Esco Global Offices Manama, Bahrain Beijing, China Chengdu, China Guangzhou, China Shanghai, China Bangalore, India Delhi, India Mumbai, India Banten, Indonesia Osaka, Japan Kuala Lumpur, Malaysia Melaka, Malaysia Manila, Philippines Singapore Seoul, South Korea Salisbury, UK Philadelphia, PA, USA Hanoi, Vietnam escoglobal.com LIVE SUPPORT Esco Micro Pte Ltd Cert. No: PT Esco Bintan Indonesia Cert. No: /E

13 Refrigerated Incubator Reliable Performance For Universal Applications

14 Welcome to Esco Esco s Vision is to provide enabling technologies for scientific discoveries to make human lives healthier and safer. A leader in the development of controlled environment, laboratory and pharmaceutical equipment solutions. A world leader in biological safety cabinets. Esco has established offices in 13 countries such as Bahrain, China, India, Japan, Korea, Malaysia, Philippines, Singapore, UK, US, Vietnam, South Africa and Indonesia and is continually expanding. North American facilities in Pennsylvania; sales, service, logistics for US & Canada. Group total of more than 600 employees. Distributors in more than 100 countries. Products independently tested to international standards. Large R&D investments, world leading technologies. State-of-the-art production; vertically integrated manufacturing floor space. Worldwide service played out over a geographic expanse so broad that the sun never sets on what we do.

15 Global Network Global Offices Distributors Products and Application Esco Life Science Tools Laboratory Equipment Medical Equipment Pharmaceutical Equipment Biosafety and Laminar Flow Fume Hoods Incubators and Ovens Assisted Reproductive Technology Containment / Compounding Pharmacy Class II Type A2 Biological Safety Cabinets Class II Type B2 Biological Safety Cabinets Class III Biological Safety Cabinets Horizontal Laminar Flow Clean Benches Vertical Laminar Flow Clean Benches Laboratory Animal Research Workstations PCR Cabinets Laboratory Fume Hoods Ductless Fume Hoods Fume Scrubbers Exhaust Blowers Fume Hood Airflow Monitors PCR PCR Thermal Cyclers Not Available in North America Forced Convection Laboratory Ovens Forced Convection Laboratory Incubators Refrigerated Incubators CO 2 Incubators Remote Monitoring, Data Logging, and Programming Software Cold Storage Ultra-low Temperature Freezers ART Workstations CO 2 Incubators with Suppressed O 2 Multi-room Incubators Downflow Booths Powder Weighing Balance Enclosures Pharmacy Isolators Cytotoxic Safety Cabinets Soft Capsule Air Showers Straddle Units Garment Storage Cabinets Pass Boxes Transfer Hatches

16 4 Refrigerated Incubator Refrigerated Incubator Introduction Esco Isotherm Refrigerated Incubators are widely used in applications such as B.O.D. Determinations, Environmental Research, Plant and Insect Studies, Fermentation Studies, and Bacterial Culturing among many others. Intuitive interfaces, microprocessor PID controls with programming options, pre-heat chamber technology, dual auto-defrosting system, UV disinfection, precisely tuned and tested ventilation and insulation package, all supported by Esco s solutions - based sales and service representatives worldwide. Key Features Isotherm refrigerated incubator Pre-heat chamber technology No exposed heating elements located inside the chamber to ensure maximum user safety. Stable heating and maximum temperature uniformity in the chamber. Standard temp setting range 0 C up to 100 C for maximum application flexibility. Secure 2-point door seal and eccentric hinge ensure maximum gasket compression for stable chamber temperature. Auto-defrosting system Auto-heating activates and continues for a predetermined time during opration. Auto-defrosting during operation Auto-defrosting activates regularly. Influence on temperature fluctuation and uniformity is minimal. Side Access port For temperature validation & mapping. Isotherm Refrigerated Incubator available in 2 sizes,110l, 240L. Easy To Service Diagnostic functions in the microprocessor include historical readout of temperatures. Diagnostic menu provides read-out of all sensor inputs and controller settings. Service can be carried out from the front. All electronics components are isolated from the work chamber and easily accessible for replacement. Low service costs.

17 Refrigerated Incubator 5 UV disinfection German-Made EBM PAPST FAN Auto-running disinfection after startup and during testing process as well, is adjustable to meet different requirements. UV light function stops when door is opened and resumes after it is closed. Glass Door For observing samples inside the chamber during operation Water resevoir to collect water during defrosting Isotherm Refrigerated Incubator, Model IFC Ventillation system Forced convection design allows rapid temperature response rates, improves uniformity, and reduces fluctuation. Low noise during operation. Ventilated stainless steel shelves contribute to uniform air circulation. folds) Bacterial opulation P ( hours 12 hours 8 hours 16 hours 20 hours 24 hours ContactTime in Hours Built-In Protection External surfaces are powder coated with Esco to eliminate 99.9% of surface bacteria within 24 hours of exposure.

18 6 Refrigerated Incubator CONTROLLER TYPE SmartSense Microprocessor PID Control Technology Actual and Set Point Displays Show actual temperature and temperature set point at the same time. LED Indicators Indicate condition of equipment during operation. Function Keys For temperature, alarm and other settings. Over Temperature Indicator Instrument-grade precision platinum temperature probe. Tuned PID control ensures fast ramp time, prevents overshoot, and ensures stable temperature once setpoint is achieved. Twin temperature displays for easy monitoring. Built-in menu is intuitive, easy to operate; left display shows parameter being set, and right display shows preset value. Audible confirmation of all settings. Diagnostic functions provide access to chamber historical temperatures and sensor read-outs to simplify service. Diagnostic LEDs on electronics PCB simplify service. Defrost setting function UV setting function Voyager Remote Monitoring, Datalogging, Programming Software Esco Voyager is a PC-based software package developed for the remote monitoring, datalogging, and programming / device configuration of Esco thermostatic products. It is a centralized monitoring and control system for your laboratory which provides extra protection for your samples. Voyager interfaces with individual Esco equipment over RS485 using the EscoBUS communications protocol. Multiple equipment maybe interfaced to a single PC. Compatible Equipment Lexicon Ultra-low Temperature Freezer CelCulture CO 2 Incubator (CCL) CelMate - CO 2 Incubator (CLM) Isotherm Forced Convection Oven (OFA) Isotherm Forced Convection Incubator (IFA) Isotherm Refrigerated Incubator (IFC)

19 Refrigerated Incubator 7 OTHER SUPERB FEATURES Forced Convection Laboratory REFRIGERATED INCUBATOR Applications APPLICATION a. Biochemical Oxygen Demand (BOD) determinations of waste water and sewage b. Plant cell growth c. Fish and Insect studies d. Fermentation studies APPLICATION e. Bacterial culturing f. Mycology studies g. Drug stability tests Safe, Superior Protection for Sample, User and the Environment Electronic over-temperature protection built into the microprocessor. Controller will control temperature at the over temperature setpoint. All electrical components are UL recognized. Electrical circuit protection in accordance with UL requirements. Over Temperature LED illuminates if the chamber encounters temperature above the set-point. Ergonomic Design Access for Temperature validation and mapping ACCESS FOR TEMPERATURE V VALIDATION AND MAPPING Access port Access port inside chamber

20 8 Refrigerated Incubator Ergonomic Door Handle with Keylock ERGONOMIC DOOR HANDLE WITH KEYLOCK RS485 COMMUNICATION PORT RS485 COMMUNICATION PORT Ergonomic door handle, operation is gravity assisted. Door keylock prevents unauthorized access to sensitive samples. The RS485 provides serial communication port for PC. It can be daisy chained from product to product and connected to a PC. Optional Stainless steel Exterior Corrosion resistant surface. Robust construction. Meets pharmaceutical & clinical laboratory requirements. EASY-TO-CLEAN Cleanroom design with minimal joints and crevices is easy to clean. Single-piece stainless steel chamber with rounded corners. EASY-TO-SERVICE Diagnostic functions in the microprocessor include historical read-out of temperatures. Diagnostic menu provides read-out of all sensor inputs and controller settings. Service can be carried out from the front. All electronic components are isolated from the work chamber and easily accessible for replacement. Low service costs.

21 Refrigerated Incubator 9 ISOCIDE TM ANTIMICROBATIAL COATING Solaris TM Pre-Heat Chamber Technology Extremely Uniform Thermal Distribution Innovative design guarantees maximum thermal performance. No exposed heating elements located inside the chamber to ensure maximum user safety. 4-zone heated air jacket ensures stable heating and maximum temperature uniformity in the chamber. Standard temperature range of up to 100 C for maximum application flexibility. Secure 2-point door seal and eccentric hinge ensure maximum gasket compression for stable chamber temperature. VentiFlow Ventilation System Forced convection design produces faster temperature response rates, improved uniformity, and reduced fluctuation. German made ebm-papst fan, permanently lubricated, maintenance free for uniform air circulation. Low energy consumption for reduced operating costs. Consistent air circulation and heat uniformity. Low noise during operation. Fresh air entry from the base of the chamber, combined with the rounded corners of the chamber interior and air exhaust at the rear of the chamber, creates uniform air circulation ensuring maximum temperature uniformity. Chamber fan inlet pulls air away from the user, preventing exposure of the user to blasts of hot air when the door is opened. Options and Accessories Voyager Software Kit Esco Voyager is a PC-based software package developed for the remote monitoring, datalogging and programming / device configuration of Esco controlled environment laboratory equipment. Additional shelf Two shelves are included for110l and 240L models as standard. Additional shelves may be ordered.

22 10 Refrigerated Incubator Ordering Information UNIT ORDERING Models IFC IFC IFC SS IFC SS Description Isotherm Refrigerated Incubators, 110L, VAC 50/60Hz Isotherm Refrigerated Incubators, 240L, VAC 50/60Hz Isotherm Refrigerated Incubators, Stainless Steel Exterior Cabinet, 110L, VAC 50/60Hz Isotherm Refrigerated Incubators, Stainless Steel Exterior Cabinet, 240L, VAC 50/60Hz Accessories ORDERING Models TOA-1021 TOA-1019 TOA-1022 Description Additional shelf, field-installed (IFC-110) Additional shelf, field-installed (IFC-240) IQ/OQ Document Voyager Software Kit Technical Specifications 820 mm / 841 mm ( / ) 730 mm / 871 mm ( / ) 600 mm / 645 mm ( / ) 399 mm / 530 mm ( / ) mm / 1462 mm ( / ) 480 mm / 700 mm ( / ) Control Panel 2. Sensor 3. Inner Chamber 4. Water Container Storage 5. UV Switch (Magnetic Switch) 6. Outer Door 7. UV Lamp 8. Access Port 9. Door Handle 10. Key Lock Door 11. Caster Wheel with Break 12. Condenser 13. Condenser Fan 14. Filter drier 15. Caster Wheel without Break 16. Compressor 17. Assistant Heater 18. Evaporator 19. Main Heater 20. Convection Fan 21. Electromagnetic Valve 22. Evaporator 23. Polyurethane Foam 24. Power Board 25. Power Inlet 26. RS 485 Socket

23 Refrigerated Incubator 11 General Specifications Isotherm Refrigerated Incubator IFC / IFC SS IFC / IFC SS Volume 110 liter (3.88 cu.ft) 240 liter (8.48 cu.ft) Temperature Range 0ºC ~ 100ºC at 10 C(±K) ±0.6 o C ±0.6 o C Temperature Variation at 15 C(±K) ±0.4 o C ±0.4 o C at 25 C(±K) ±0.3 o C ±0.3 o C at 37 C(±K) ±0.3 o C ±0.5 o C at 10 C(±K) ±0.3 o C ±0.3 o C Temperature Fluctuation at 15 C(±K) ±0.3 o C ±0.3 o C at 25 C(±K) ±0.3 o C ±0.3 o C at 37 C(±K) ±0.3 o C ±0.3 o C Heating up time to 37 C from the ambient temperature 31 minutes 37 minutes Heating up time to 50 C from the ambient temperature 33 minutes 50 minutes Recovery time after door was opened for 30 sec at 5 C 3 minutes 5 minutes at 37 C 2 minutes 3 minutes at 50 C 2 minutes 3 minutes Cooling down time from 22 C to 0 C 90 minutes 120 minutes Cooling down time from 22 C to 5 C 60 minutes 80 minutes Cooling down time from 22 C to 10 C 34 minutes 48 minutes Heat emission at 37 C set point (compressor on) (Watt) Heat emission at 37 C set point (compressor off) (Watt) Electrical ( V, AC, 50/60Hz, 1Ø) at 15 C 400 W 481 W Power* at 25 C 431 W 563 W Cabinet Full Load Amps (FLA) 6 A 6 A Set Point 15 C Cabinet BTU Set Point 25 C Incubator Construction Number of Shelves Load Per Shelf Max. Total Load Main Body Electro galvanized steel with white oven baked epoxy powder-coated finish Chamber Stainless steel, grade 304 Standard 2 2 Maximum kg (13.6 lbs) 60 kg (27.3 lbs) External Dimensions (W x D x H) 820 x 730 x 1185 mm (32.3 x 28.7 x 45.6 ) 841 x 871 x 1462 mm (33.1 x 34.3 x 53.3 ) Internal Dimensions (W x D x H) 600 x 399 x 480 mm (23.6 x 15.7 x 18.9 ) 645 x 530 x 700 mm (25.4 x 20.9 x 27.6 ) Net Weight 134 Kg ( lbs) 164 kg ( lbs) Shipping Weight 166 Kg ( lbs) 195 kg ( lbs) Shipping Dimensions, Maximum (W x D x H) 878 x 787 x 1425 mm (34.5 x 30.9 x 56.1 ) 891 x 933 x 1628 mm (35 x 36.7 x 64.1 ) Shipping Volume, Maximum 0.98 m 3 (34.60 cu.ft) 1.35 m 3 (47.67 cu.ft) * In order to calculate the current at maximum power consumption, divide maximum power consumption by the voltage. All technical specifications are specified for units with standard equipment at an ambient temperature of 25 C and a voltage fluctuation of ±10%. The temperature data is determined in accordance to DIN standards. All indications are average values, typical for units produced in series. Esco reserves the right to alter technical specifications at all times.

24 PT Esco Bintan Indonesia ART Equipment Biological Safety Cabinets CO 2 Incubators Compounding Pharmacy Equipment Containment / Pharma Products Ductless Fume Hoods Freeze Dryer Lab Animal Research Products Laboratory Fume Hoods Laboratory Ovens and Incubators Laminar Flow Clean Benches PCR Cabinets PCR Thermal Cyclers Powder Weighing Balance Enclosures Ultra-low Freezers The Esco Group of Companies is a global life sciences tools provider with sales in over 100 countries. The group is active in lab equipment, pharma equipment and medical devices. Manufacturing facilities are located in Asia and Europe. R&D is conducted worldwide spanning the US, Europe and Asia. Sales, service and marketing subsidiaries are located in 12 major markets including the US, UK, Singapore, Japan, China and India. Regional distribution centers are located in the US, UK, and Singapore. Life Science Chemical Research Assisted Reproductive Technology (ART) Pharmaceutical Equipment General Equipment Esco Technologies, Inc Turnpike Drive, Units Hatboro, PA 19040, USA Toll-Free USA and Canada Tel Fax us.escoglobal.com usa@escoglobal.com Esco Micro Pte. Ltd. 21 Changi South Street 1 Singapore Tel Fax mail@escoglobal.com _IFC Icebreaker_A4_vC3_Jan-2014 Esco can accept no responsibility for possible errors in catalogues, brochures and other printed materials. Esco reserves the right to alter its products and specifications without notice. All trademarks and logotypes in this material are the property of Esco and the respective companies. escoglobal.com LIVE SUPPORT Esco Global Offices Beijing, China Chengdu, China Kuala Lumpur, Malaysia Manama, Bahrain Guangzhou, China Hanoi, Vietnam Melaka, Malaysia Mumbai, India Philadelphia, PA, USA Salisbury, UK Shanghai, China Seoul, Korea Delhi, India Osaka, Japan Manila, Philippines Midrand, South Africa Jakarta, Indonesia Singapore Esco Micro Pte Ltd Cert. No: Cert. No: /E

25 Forced Convection Laboratory Ovens Reliable Performance For Universal Applications

26 Forced Convection Laboratory Ovens Welcome to Esco Esco s Vision is to provide enabling technologies for scientific discoveries to make human lives healthier and safer. A leader in the development of controlled environment, laboratory and pharmaceutical equipment solutions. A world leader in biological safety cabinets. Esco has established offices in 13 countries such as Bahrain, China, India, Japan, Korea, Malaysia, Philippines, Singapore, UK, US, Vietnam, South Africa and Indonesia and is continually expanding. North American facilities in Pennsylvania; sales, service, logistics for US & Canada. Group total of more than 600 employees. Distributors in more than 100 countries. Products independently tested to international standards. Large R&D investments, world leading technologies. State-of-the-art production; vertically integrated manufacturing floor space. Worldwide service played out over a geographic expanse so broad that the sun never sets on what we do.

27 Forced Convection Laboratory Ovens Global Network Global Offices Distributors Products and Application Esco Life Science Tools Laboratory Equipment Medical Equipment Pharmaceutical Equipment Biosafety and Laminar Flow Fume Hoods Incubators and Ovens Assisted Reproductive Technology Containment / Compounding Pharmacy Class II Type A2 Biological Safety Cabinets Class II Type B2 Biological Safety Cabinets Class III Biological Safety Cabinets Horizontal Laminar Flow Clean Benches Vertical Laminar Flow Clean Benches Laboratory Animal Research Workstations PCR Cabinets Laboratory Fume Hoods Ductless Fume Hoods Fume Scrubbers Exhaust Blowers Fume Hood Airflow Monitors PCR PCR Thermal Cyclers Not Available in North America Forced Convection Laboratory Ovens Forced Convection Laboratory Incubators Refrigerated Incubators CO 2 Incubators Remote Monitoring, Data Logging, and Programming Software Cold Storage Ultra-low Temperature Freezers ART Workstations CO 2 Incubators with Suppressed O 2 Multi-room Incubators Downflow Booths Powder Weighing Balance Enclosures Pharmacy Isolators Cytotoxic Safety Cabinets Soft Capsule Air Showers Straddle Units Garment Storage Cabinets Pass Boxes Transfer Hatches

28 4 Forced Convection Laboratory Ovens Forced Convection Laboratory Ovens Introduction Introducing Esco Isotherm - world class laboratory ovens from Esco with the technologies and compliance to prove it. Ergonomic, intuitive interfaces, microprocessor PID controls with programming options, 4-zone heated air jacket, precisely tuned and tested ventilation and insulation package, all supported by Esco s solutions-based sales and service representatives worldwide. Key Features Solaris TM Pre-Heat Chamber Technology Isotherm Forced Convection Laboratory Ovens Reliable Performance For Universal Applications Extremely Uniform Thermal Distribution Innovative design guarantees maximum thermal performance. No exposed heating elements located inside the chamber to ensure maximum user safety. 4-zone heated air jacket ensures stable heating and maximum temperature uniformity in the chamber. Standard temperature range of up to 300 C for maximum application flexibility. Secure 2-point door seal and eccentric hinge ensure maximum gasket compression for stable chamber temperature. Isotherm Forced Convection Laboratory Ovens available in 5 sizes, 32L, 54L, 110L, 170L, 240L. Pre-heated air enters work chamber Pre-heat zone below work chamber Air supply from outside

29 Forced Convection Laboratory Ovens 5 VentiFlow Ventilation System - Forced convection design produces faster temperature response rates, improved uniformity, and reduced fluctuation. - German made ebm-papst fan, permanently lubricated, maintenance free for uniform air circulation. - Low energy consumption for reduced operating costs. - Fan speed and air exchange rates are adjustable. - Consistent air circulation and heat uniformity. - Low noise during operation. - Fresh air entry from the base of the chamber, combined with the rounded corners of the chamber interior and air exhaust at the rear of the chamber, creates uniform air circulation ensuring maximum temperature uniformity. - Chamber fan inlet pulls air away from the user, preventing exposure of the user to blasts of hot air when the door is opened. Quality Esco Construction - Electrogalvanized steel with white oven-baked epoxy-polyester antimicrobial powder-coated finish. - External surfaces are powder coated with Esco to eliminate 99.9% of surface bacteria within 24 hours of exposure. Gasket of outer door - for thermal decoupling Secure 2-point door seal Door Handle Isotherm Forced Convection Laboratory Oven Superior Insulation - Multi-layer chamber, pre-heat chamber, insulation and external carcass. - Improves chamber temperature stability, while reducing external surface temperatures. - Unique door ventilation design reduces door temperature even when the chamber temperature is at the maximum operating point. - Superior insulation performance reduces heat load output to the laboratory, reduces operating power consumption, and lowers operating costs.

30 6 Forced Convection Laboratory Ovens CONTROLLER TYPE SmartSense Microprocessor PID Control Technology LED Indicators Indicate condition of equipment during heating. Actual and Set Point Displays Show actual temperature and temperature set point at the same time. Independent adjustable over-temperature thermostat Protects the equipment against overheating. Airflow Adjuster Opens / closes rear exhaust vent to adjust airflow for varying applications. Function Keys For temperature, alarm, program and other settings. Main Power Switch Conveniently accessible. Instrument-grade precision platinum temperature probe. Tuned PID control ensures fast ramp time, prevents overshoot, and ensures stable temperature once setpoint is achieved. Twin temperature displays for easy monitoring. Built-in menu is intuitive, easy to operate; left display shows parameter being set, and right display shows preset value. User programmable alarm setpoints. Display temperature units selectable between C / F. User programmable PIN to prevent unauthorized use. Anywhere from 10 programs with 5 segments to 1 program with 50 segments may be configured. Programs may be set up to repeat automatically. Audible confirmation of all settings. Diagnostic functions provide access to chamber historical temperatures and sensor read-outs to simplify service. Diagnostic LEDs on electronics PCB simplify service. Wide Range of Program Options o C o C Sample Program 1 Repeats of identical processes based on user s setting of start temp, arrival temp, and running time after arrival. All settings can be done in a single program. For example, repeat a process from 50 C to 70 C and back. Sample Program 2 Running different processes sequentially based on user s setting of start temp, arrival temp, and running time after arrival. Different programs may be linked to extend the total number of sequences, thus creating virtually unlimited programming options.

31 Forced Convection Laboratory Ovens 7 Voyager Remote Monitoring, Datalogging, Programming Software Esco Voyager is a PC-based software package developed for the remote monitoring, datalogging, and programming / device configuration of Esco thermostatic products. Voyager interfaces with individual Esco equipment over RS485 using the EscoBUS communications protocol. Up to 16 devices of equipment may be interfaced to a single PC. OTHER SUPERB FEATURES Compatible Equipment Lexicon Ultra-low Temperature Freezer (with U-Series Controller) CelCulture CO 2 Incubator (CCL) CelMate - CO 2 Incubator (CLM) Forced Convection Laboratory OVEN Applications Isotherm Forced Convection Oven (OFA) Isotherm Forced Convection Incubator (IFA) Isotherm Low Temperature Incubator (IFC) APPLICATION MATERIAL/ SAMPLE APPLICATION MATERIAL/ SAMPLE Glassware Paint Drying Powders Paper, textile Soil, sand Curing Adhesives Plastics Metals Electronics Heated storage Pills, drugs Pharmaceutical preparations Vulcanization Rubber Material testing Cables Plastics Safe, Superior Protection for Sample, User and the Environment Multiple redundant over-temperature protection systems to guarantee maximum sample and user protection. Electronic over-temperature protection built into the microprocessor. Redundant mechanical over-temperature protection, adjustable from the front, independent from the microprocessor. Overall temperature protection meets DIN Class 3.1. Red LED illuminates if external mechanical temperature protection is engaged. Controller will control temperature at the overtemperature setpoint. All electrical components are UL recognized. Electrical circuit protection in accordance with UL requirements.

32 8 Forced Convection Laboratory Ovens Ergonomic Design Access for Temperature validation and mapping Access port Optional Stainless steel Exterior Back View RS485 Communication Port Corrosion resistant surface. Robust construction. Meets pharmaceutical & clinical laboratory requirements. The RS485 provides serial communication port for PC. It can be daisy chained from product to product and connected to a PC. Ergonomic Door Handle with Keylock Ergonomic door handle, operation is gravity assisted. Door keylock prevents unauthorized access to sensitive samples. Easy-to-Clean Cleanroom design with minimal joints and crevices is easy to clean. Single-piece stainless steel chamber with rounded corners. Easy-to-Service Diagnostic functions in the microprocessor include historical read-out of temperatures. Diagnostic menu provides read-out of all sensor inputs and controller settings. Service can be carried out from the front. All electronic components are isolated from the work chamber and easily accessible for replacement. Low service costs.

33 Forced Convection Laboratory Ovens 9 Options and Accessories Wall bracket (only for 32L and 54L chambers) Accommodates desired operating heights. Support stands fixed height at 703 mm (27.7 ) Reversed door swing (factory installed) Voyager Software Kit Esco Voyager is a PC-based software package developed for the remote monitoring, datalogging and programming / device configuration of Esco controlled environment laboratory equipment. TESTING AND CERTIFICATION Esco Isotherm Laboratory Ovens were tested, validated and have passed the calibration conducted by Testo Industrial Services GmbH, an ISO/IEC17025 accredited testing laboratory. The measuring installation used for calibration are regularly calibrated and traceable to the national standards of the German Federal Physical Technical Institute (PTB). The statement of conformity was made according to DIN EN ISO , according to calibration instruction QSA Ordering Information UNIT ORDERING Models OFA-32-8 OFA-32-8-SS OFA-54-8 OFA-54-8-SS OFA OFA ss OFA OFA ss OFA OFA ss Description Isotherm General Purpose Oven, 32L, VAC 50/60Hz Isotherm General Purpose Oven, Stainless Steel Exterior Cabinet, 32L, VAC 50/60Hz Isotherm General Purpose Oven, 54L, VAC 50/60Hz Isotherm General Purpose Oven, Stainless Steel Exterior Cabinet, 54L, VAC 50/60Hz Isotherm General Purpose Oven, 110L, VAC 50/60Hz Isotherm General Purpose Oven, Stainless Steel Exterior Cabinet, 110L, VAC 50/60Hz Isotherm General Purpose Oven, 170L, VAC 50/60Hz Isotherm General Purpose Oven, Stainless Steel Exterior Cabinet, 170L, VAC 50/60Hz Isotherm General Purpose Oven, 240L, VAC 50/60Hz Isotherm General Purpose Oven, Stainless Steel Exterior Cabinet, 240L, VAC 50/60Hz

34 10 Forced Convection Laboratory Ovens Ordering Information Accessories ORDERING Accessories TOA-1005 TOA-1006 TOA-1007 TOA-1008 TOA-1009 TOA-1010 TOA-1011 TOA-1012 TOA-1013 TOA-1014 TOA-1018 TOA-1019 Description Wall bracket for OFA-32-8 Wall bracket for OFA-54-8 Support stand, 703mm (27.7 ) for OFA-32-8 Support stand, 703mm (27.7 ) for OFA-54-8 Support stand, 703mm (27.7 ) for OFA Support stand, 703mm (27.7 ) for OFA Support stand, 703mm (27.7 ) for OFA Additional shelf, for OFA-32-8 Additional shelf, for OFA-54-8 Additional shelf, for OFA Additional shelf, for OFA Additional shelf, for OFA OFA 32L, 54L, 110L Voyager software kit Technical Specifications 550mm / 550mm / 710mm (21.7 / 21.7 / 28.0 ) 437mm / 527mm / 587mm (17.2 / 20.7 / 23.1 ) 7 615mm / 695mm / 785mm (24.2 / 27.4 / 30.9 ) 320mm / 400mm / 490mm (12.6 / 15.7 / 19.3 ) Control Panel 2. Door Handle 3. Door Key Lock 4. Shelves 5. Air Exhaust 6. Fan 7. Power Supply Inlet 8. RS485 Communication Port 9. Access Port 400mm / 400mm / 560mm (15.7 / 15.7 / 22.0 ) 210mm / 300mm / 360mm (8.3 / 11.8 / 14.2 ) 250mm / 340mm / 400mm (9.8 / 13.4 / 15.7 ) OFA 170L & 240L 740mm / 800mm (29.1 / 31.5 ) 800mm / 827mm (31.5 / 32.6 ) 910mm / 1030mm ( 35.8 / 40.6 ) 580mm / 700mm ( 22.8 / 27.6 ) 580mm / 640mm (22.8 / 25.2 ) 460mm / 487mm (18.1 / 19.2 ) 500mm / 527mm (19.7 / 20.8 )

35 Forced Convection Laboratory Ovens 11 General Specifications Forced Convection Laboratory Ovens OFA-32-8 OFA-32-8-ss* OFA-54-8 OFA-54-8-ss* OFA OFA ss* OFA OFA ss* OFA OFA ss* Volume 32 liter (1.13 cu.ft) 54 liter (1.91 cu.ft) 110 liter (3.88 cu.ft) 170 liter (6.00 cu.ft) 240 liter (8.48 cu.ft) Temperature Range Ambient C to C Temperature Variation Per DIN Spatial Uniformity Temperature Fluctuation Per DIN Control Fluctuation Heating up time Recovery time after 30 sec door opening at 70 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 150 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 250 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 70 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 150 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 250 C <=+/ C <=+/ C <=+/ C <=+/ C <=+/ C at 70 C 36 minutes 41 minutes 45 minutes 44 minutes 60 minutes at 150 C 25 minutes 32 minutes 59 minutes 52 minutes 52 minutes at 250 C 37 minutes 40 minutes 61 minutes 57 minutes 91 minutes at 70 C 6 minutes 6 minutes 12 minutes 3 minutes 20 minutes at 150 C 7 minutes 6 minutes 11 minutes 9 minutes 10 minutes at 250 C 6 minutes 7 minutes 7 minutes 8 minutes 12 minutes Power consumption at 70 C 97 W 38 W 121 W 162 W 194 W Electrical ( V, AC, 50/60Hz, 1Ф) Power consumption at 150 C 270 W 356 W 440 W 492 W 519 W Power consumption at 250 C 519 W 701 W 1020 W 932 W 1088 W Maximum Power Consumption** 1533 W 1707 W 2252 W 2176 W 2382 W Noise Level 51 db 49 db 49 db 51 db 52 db Oven Construction Number of Shelves Main Body Electrogalvanized steel with white oven-baked epoxy-polyester powder-coated finish Chamber Stainless steel, grade 304 Standard Maximum Maximum Load Per Shelf 15 kg (33 lbs) 15 kg (33 lbs) 30 kg (66 lbs) 30 kg (66 lbs) 30 kg (66 lbs) External Dimensions (W x D x H) 550 x 437 x 615 mm 21.7" x 17.2" x 24.2" 550 x 527 x 695 mm 21.7 x 20.7 x x 587 x 785 mm 28 x 23.1 x x 800 x 910 mm 29.1 x 31.5 x x 827 x 1030 mm 31.5 x 32.6 x 40.6 Internal Dimensions (W x D x H) 400 x 250 x 320 mm 15.7" x 9.8" x 12.6" 400 x 340 x 400 mm 15.7" x 13.4" x 15.7" 560 x 400 x 490 mm 22 x 15.7 x x 500 x 580 mm 22.8 x 19.7 x x 527 x 700 mm 25.2 x 20.8 x 27.6 Net Weight 43 kg (95 lbs) 52 kg (115 lbs) 75 kg (165 lbs) 114 kg (251 lbs) 138 kg (304 lbs) Shipping Weight 55 kg (121 lbs) 66 kg (146 lbs) 94 kg (207 lbs) 136 kg (300 lbs) 160 kg (353 lbs) Shipping Dimensions, Maximum (W x D x H) 620 x 530 x 840 mm 24.4 x 20.9 x x 620 x 920 mm 24.8 x 24.4 x x 680 x 1020 mm 30.7 x 26.8 x x 900 x 1100 mm 35.4 x 35.4 x x 900 x 1200 mm 35.4 x 35.4 x 47.2 Shipping Volume, Maximum 0.37 m 3 (13.1 cu.ft) 0.49 m 3 (17.3 cu.ft) 0.61 m 3 (21.5 cu.ft) 0.89 m 3 (31.4 cu.ft) 0.97 m 3 (34.3 cu.ft) Note: All technical specifications are specified for units with standard equipment at an ambient temperature of 25 C and a voltage fluctuation of ±10%. The temperature data are determined in accordance with DIN standards as per factory type test condition. Esco reserves the right to alter technical specifications at all times. * Stainless steel exterior option is avaiable for all sizes. ** In order to calculate the current at maximum power consumption, divide maximum power consumption by the voltage. Standards Compliance Temperature Safety DIN Class 3.1 Electrical Safety UL , USA; CAN/CSA-22.2, No ; EN , Europe; IEC , Worldwide