Compact Lawn Mower. IMPORTANT: Read and follow all safety rules and operating instructions before using this product. Instruction Manual

Transcription

1 Compact Lawn Mower Conforms to UL STD 1447 Certified to CAN/CSA STD. C22.2 No. 147-M90 IMPORTANT: Read and follow all safety rules and operating instructions before using this product. Instruction Manual

2 2 Table of Contents SPECIFICATIONS 2 KNOW YOUR MOWER 3 EXPLODED VIEW 4 ASSEMBLY 5 OPERATION 10 MAINTENANCE 17 TROUBLESHOOTING 19 SYMBOLS 20 ELECTRICAL INFORMATION 21 IMPORTANT SAFETY INSTRUCTIONS 23 WARRANTY 26 EXPLODED VIEW 27 PARTS LIST 28 Specifications ELECTRIC LAWN MOWER Voltage Current Motor Speed Cutting Width Cutting height adjustment Wheel size Weight 120 V ~ 60 Hz 11 A 3,250 rpm 16 (40 cm) 1-3 (25 75 mm) Front 170 mm Rear 255 mm 33 lb 1 oz (15 kg)

3 Know Your Mower a a

4 4 Exploded View Item Description 1 Handle 2 Lock-off button 3 Start lever 4 Upper handle 5 Unlock button 6 Cord strain relief 7 Lower handle 8 Deflector guard 9 Carry handle 10 Lever for height adjustment 11 Wheel 12 Support 13 Grass catcher a handle b frame (See pg 6) c clamping sleeve (See pg 6) d hook (See pg 6) e support (See pg 6) f flap (See pg 14) 14 Cord clip 15 Holder for extension cord 16 Power cord with plug 17 Air vents 18 Spindle 19 Cutting blade 20 Bolt 21 Mulching insert a unlock button 22 Rear discharge chute 23 Roller

5 5 UNPACKING This product requires assembly. Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. Inspect the product carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. If any parts are damaged or missing, please call customer service for assistance. ITEMS NOT SUPPLIED Screwdriver Cross-head screwdriver Suitable personal protective equipment Part List PACKING LIST Mower Instruction Manual WARNING: Do not use this product if any parts on the packing list are already attached to your product when you unpack it. Parts on this list are not attached to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.

6 6 GRASS CATCHER Pull the clamping sleeve up (13c) and lock it onto the frame (13b) (Fig. 1). Ensure the side clamping sleeves are properly fixed on the frame. 13b Assembly 13c Fig. 1 Open the deflector guard (8) and hold it in position. Align the supports (13e) with the hooks (13d) to hang the grass catcher (13) onto the lawn mower (Fig. 2). 13d 13e Fig. 2 Note: Check if the mulching insert (21) is already inserted into the discharge chute (22). Remove the mulching insert (21) prior to attaching the grass catcher (13) if necessary.

7 7 model no contact contactus: us: HANDLE Cutting position The storage position is used to store the product in a space-saving manner when not in use. Unplug the product before switching to this position. Storage position Vertical storage position Assembly The cutting position is for operating the product. Only connect the product to power supply and operate it in this position.

8 8 When the product is delivered the handle (7) is in its storage position. Rotate the handle (7) and move it into its cutting position (Fig. 3). Assembly 7 Fig. 3 Press the unlock button (5) and hold it in position while adjusting the height of the upper handle (4) by pulling or pushing (Fig. 4) Fig. 4

9 9 Release the unlock button (5) and make sure it locks in place (Fig. 5). Fig. 5 5 Assembly Ensure that the power cord (16) is properly fixed with the cord clips (14) to the handle. Connect to the power supply. Double the extension cord back, about 16 (40 cm) from the end. Lead the loop through the cord strain relief (6) and hang the loop over the hook. Gently pull on the cord to ensure that it is fastened (Figs. 6, 7). 6 6 Fig. 6 Fig. 7 ROLLER The rear roller (23) leaves a stripe finish on the lawn and helps to prevent scalping on borders and edges. NOTE: Pull or push the handle gently. DO NOT use sudden force WARNING: For your safety, the handle must be in cutting position before connecting the plug to socket

10 10 GENERAL OPERATION Operation Check the product, its power cord and plug as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. Double check that the blade is properly fixed. Always hold the product by its handles. Keep the handles dry to ensure safe support. Ensure that the air vents are always unobstructed and clear. Clean them if necessary with a soft brush. Blocked air vents may lead to overheating and damage the product. Switch the product off immediately if you are disturbed while working by other people entering the working area. Always let the product come to a complete stop before removing the grass collection box. Do not overwork yourself. Take regular breaks to ensure you can concentrate on the work and have full control over the product. ON/OFF SWITCH Press on the safety switch button (1) to unlock the start/stop lever (2) (Fig. 8). Then operate the start/stop lever (2) to switch the mower on. 1 2 Fig. 8 CUTTING HEIGHT ADJUSTMENT Adjust the cutting height according to the needs of your lawn. The cutting height depends on the kind of lawn and its actual height. When mowing high grass, start with the maximum cutting height and make a second cut with lower cutting height. Push the lever for height adjustment (10) towards the product (step 1, Fig. 9) and move it to the desired cutting height (step 2). Release the lever (10) (step 3) and ensure it locks into place properly NOTE: There are 6 cutting height levels available. The adjustable heights range from 1 3 (25, 35, 45, 55, 65, 75 mm).

11 11 10 Step 2 Operation Step 1 Step 3 Fig. 9 HANDLE ADJUSTMENT HEIGHT ADJUSTMENT Rotate the upper handle (4) into cutting position (Fig. 10). 2 1 Fig. 10

12 12 Ensure the power cord (16) is not trapped and press the unlock button (5). Press the unlock button (5) and push or pull the upper handle (4) to the desired height (Fig. 11). During this height adjustment keep the button pressed. Operation Fig Fig. 12 NOTE: Make sure that the unlock button (5) snaps into place after adjustment. Do not use the product in any other intermediate position (Fig. 12). Always push or pull the upper handle in a gentle way. DO NOT use sudden force.

13 13 HANDLE POSITIONS Fig. 13 Fig. 14 HANDLE ADJUSTMENT From storage position into cutting position: Rotate the handle (4) to cutting position (Fig. 17). Ensure the power cord (16) is not squeezed and press the unlock button (5) (Fig. 18). Vertical storage position Fig. 15 Storage position Fig. 16 Operation Press the unlock button (5), adjust the handle tp posotion. Push the upper handle (4) into release the locking mechanism (Fig. 13). Rotate handle to storage position (Fig.14).

14 14 2 Operation 1 Fig. 17 cutting position Fig. 18 GRASS CATCHER Always attach the grass catcher (13) when using the product for grass collection. Always carry the grass catcher by its handle. Indicator The grass catcher (13) is equipped with a flap (13f) that indicates the filling volume during operation. When the flap (13f) is opened (during operation), the grass catcher (13) has efficient volume left to collect grass (Fig. 19). When the flap (13f) is closed (during operation), the grass catcher (13) is full and must be emptied (Fig. 20) f Empty position Fig. 19 Full position Fig. 20

15 15 EMPTYING Empty the grass catcher (13) frequently during use. Do not wait until it is completely full. We recommend emptying it when it is half full. Lift the deflector guard (8) up and hold it in place. Lift the grass catcher (13) off the supports (13e). Remove the grass clippings from the discharge chute (22) into the grass catcher (13) Use a proper tool such as a brush. Empty the grass clippings onto a compost heap. Re-fit the grass catcher (13) to the supports (13e). When using the product without the grass catcher, insert the mulching insert (21). Switch the motor off and wait until the blade has come to a complete stop before removing the grass catcher Operation MULCHING INSERT For mulching work use the mulching insert (21). Open the deflector guard (8) and hold it in position. Remove the grass catcher (13) if necessary. Insert the mulching insert (21) into the rear discharge chute (22) (Fig. 21). Ensure the unlock button (21a) snaps into place. Press the unlock button (21a) to release and remove the mulching insert (21) (Fig. 22) a Fig. 21 Fig. 22 WARNING Do not attempt to use the product without the grass catcher attached when collecting grass danger of flying objects

16 16 MOWING Operation Make sure the lawn is clear of stones, sticks, wires, and other objects that could damage the lawn mower blades or motor. Such objects could be accidentally thrown by the mower in any direction and cause serious personal injury to the operator and others. To reduce the possibility of disconnecting the lawn mower from the extension cord, ensure that the cord restraint system is used. For a healthy plot of grass, only cut off one-third or less of the total length of the grass. When cutting heavy grass, reduce walking speed to allow for more effective cutting and a proper discharge of the clippings. Do not cut wet grass. It will stick to the underside of the deck and prevent proper mulching of grass clippings. New or thick grass may require a narrower cut. Clean the underside of the mower deck after each use to remove grass clippings, leaves, dirt, and any other accumulated debris AFTER USE Switch the product off and let it cool down. Check, clean and store the product as described below. 1 WARNING: For your safety, it is required that the plug attached to the lawn mower is always connected to an extension cord. The extension cord must be suitable for outdoor use with sockets protected against water splashing. The extension cord must always be used with the cord restraint system (16). WARNING: If the product strikes a foreign object, stop the engine. Switch the product off, disconnect it from the power supply and let it cool down. Inspect the product thoroughly for damage. Have any damage repaired before restarting. Extensive vibration of the product during operation is an indication of damage.

17 17 17 model no contact us: us: THE GOLDEN RULES FOR CARE Keep the product clean. Remove debris from it after each use and before storage. Regular and proper cleaning will help ensure safe use and prolong the life of the product. Inspect the product before each use for worn and damaged parts. Do not operate it if you find broken or worn parts. GENERAL CLEANING Clean the product with a dry cloth. Use a brush for areas that are hard to reach. Remove stubborn dust with compressed air (max. 3 bar). Check for any damage and wear. Repair damage in accordance with this instruction manual or take it to an authorized service centre before using the product again. Keep the underbody and blade clean and free of debris. All nuts and bolts must be checked periodically for tightness before operation. After prolonged use, especially in sandy soil conditions, the blade device will become worn and lose some of the original shape. Cutting efficiency will be reduced and the blade should be replaced. Keep the blade sharp to ensure good cutting performance. Replace a worn or damaged blade with a new one of the same type or have it sharpened by a qualified specialist. Undo the fastening bolt. Remove the blade and replace with a new one. Blade model: GM01BX0011. When fitting the blade, make sure it is installed in the right direction. The blade s air vanes must point toward the motor compartment. Then retighten the fastening bolt. The tightening torque should be approximately 18 ft-lb (25 Nm). Maintenance STORAGE Clean the product as described above. Store the product and its accessories in a dry, frost-free place. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between 10 and 30 C. We recommend using the original package for storage or covering the product with a suitable cloth to protect it against dust. WARNING: Before inspecting, cleaning or servicing the machine, unplug the power cord and wait for all moving parts to stop. Failure to follow these instructions can result in serious personal injury or property damage.

18 18 Maintenance REPLACING THE CUTTING BLADE (FIG. 23, 24) Stop the motor and disconnect the power supply. Allow the blade to come to a complete stop. Turn the mower on its side. Wedge a block of wood between the blade and the mower deck in order to prevent the blade from turning when the nut is being removed (Fig. 23). Loosen the blade nut using a 14 mm wrench or socket (not provided) (Fig. 24). Remove the blade nut, and blade. Make certain the fan assembly is pushed completely against the motor shaft. Place the new blade on the shaft against the fan assembly. Make sure it is installed with the curved ends pointing up toward the mower deck and not down toward the ground. Thread the blade nut on the shaft and finger tighten. Torque the blade nut down using a torque wrench (not provided) to ensure the bolt is properly tightened. BLADE WOOD BLOCK BLADE NUT Fig. 23 Fig. 24 NOTE: Only use identical replacement blades. NOTE: Make certain all parts are replaced in the exact order in which they were removed. NOTE: Only use YARDWORKS replacement parts. YARDWORKS mower blade replacement part #

19 19 PROBLEM CAUSE SOLUTION Power is off Check the socket, cord and plug and have any repairs carried out by an electrician. Defective on/off switch 1. Mower does Repair by authorized service Worn carbon brushes not start centre. Defective motor Set a higher cutting height. Lift the Grass too long front wheels slightly by pressing down on the handle. 2. Motor stops Blockage by foreign object Remove the foreign object Cut height too low Set a higher cutting height 3. Result unsatisfactory or motor labours 4. Blade fails to turn 5. Strange noises, rattling or vibrations 6.Motor runs but blade fails to turn Blade blunt Blade area blocked Blade installed incorrectly Blade blocked by grass Blade nut loose Blade screw loose Blade damaged Belt drive broken Have the blade sharpened or replace it Clean the equipment Install the blade correctly Remove the grass Tighten the blade nut Tighten the blade screw Replace the blade Repair by authorized service centre Troubleshooting

20 20 Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product effectively and safely. Exploded View Symbol Name Designation/ Explanation V Volts Voltage A Amperes Current Hz Hertz W Watts Power hrs Hours Time Alternating Current Class II Construction Read the Operator s Manual Eye and Hearing Protection Safety Alert Do not mow up and down slopes. Frequency (cycles per second) Type of current Double-insulated construction To reduce the risk of injury, user must read and understand operator s manual before using this product. Wear eye and hearing protection when operating this equipment. Precautions that involve your safety. To avoid a risk of injury do not mow up and down slopes. Always mow across slopes. ( Angle 15 ) Symbol Name Keep all persons and pets at a safe distance from the mower while operating. Keep hands and feet clear of mower deck and discharge opening at all times. Designation/ Explanation To avoid the risk of injury to bystanders keep all persons and pets at a safe distance from the mower while operating. Rotating blades can cause serious injury. Keep hands and feet clear of mower deck and discharge opening at all times. Always be sure blade has stopped after releasing switch lever and unplugging before removing and replacing grass catcher, cleaning, servicing, transporting or lifting the mower. Objects struck by mower blade can cause serious injury. Stay behind Stay behind the handle when the handle the motor is when the motor running. Always is running. ensure persons and pets are clear of the discharge from the mower while operating. SAVE THESE INSTRUCTIONS.

21 21 DOUBLE INSULATION Double insulation is a concept in safety in electric power tools that eliminates the need for the usual three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor components with protecting insulation. Double-insulated tools do not need to be grounded. ELECTRICAL CONNECTION This product has a precision-built electric motor. It should be connected to a power supply that is 120 V, AC only (normal household current), 60 Hz. Do not operate this product on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If your product does not operate when plugged into an outlet, double-check the power supply. Electrical Information GROUND FAULT CIRCUIT INTERRUPTER Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the product. Receptacles are available having built-in GFCI protection and may be used for this measure of safety. GUIDELINES FOR USING EXTENSION CORDS USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause overheating. The table below shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. NOTE: Servicing of a product with double insulation requires extreme care and knowledge of the system and should be performed only by a qualified service technician. For service, we suggest you return the tool to your nearest authorized service centre for repair. Always demand that original factory replacement parts be used when servicing. WARNING: The double-insulated system is intended to protect the user from shock resulting from a break in the tool s internal insulation. Observe all normal safety precautions to avoid electric shock.

22 22 Electrical Information Ampere Rating Minimum Gauge for Extension Cords (AWG) (when using 120 V only) Total Length of Cord in Feet (metres) More Than Not More Than 25' (7.6 m) 50' (15 m) 100' (30.4 m) 150' (45.7 m) Not Recommended When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the product will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords listed by Underwriters Laboratories (UL) should be used. When working outdoors with a product, use an extension cord that is designed for outside use. This type of cord is designated with WA on the cord s jacket. Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation. It is possible to tie the extension cord and power cord in a knot to prevent them from becoming disconnected during use. Make knot as shown above, then connect the plug end of the power cord into the receptacle end of the extension cord. This method can also be used to tie two extension cords together. WARNING: Although this tool is double insulated, the extension cord and receptacle must still be grounded while in use to protect the operator from electric shock. WARNING: Check extension cord before each use. If damaged, replace immediately. Never use product with a damaged cord. Touching the damaged area could cause electric shock, resulting in serious injury.

23 23 READ ALL INSTRUCTIONS This cutting machine is capable of severing hands and feet and throwing objects. Failure to observe all safety instructions could result in serious injury or death. Do not use the lawn mower in damp or wet conditions or operate in the rain. Never allow adults to operate the product without proper instruction. Keep the area clear of all bystanders, children, and pets while mowing. Stop machine if anyone enters the area. Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them. Keep children out of the mowing area and under the watchful care of a responsible adult other than the operator. Be alert and turn mower off if a child enters the area. Never allow children to operate the machine. Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view of a child. Do not wear loose clothing or jewellery. They can be caught in moving parts. Use of rubber gloves and footwear is recommended when working outdoors. Keep firm footing and balance. Do not overreach. Overreaching can result in loss of balance. Do not operate the equipment while barefoot or when wearing sandals or similar lightweight footwear. Wear protective footwear that will protect your feet and improve your footing on slippery surfaces. Do not leave the mower unattended while it is running. Keep hands and feet away from cutting area. Operate the lawn mower only in daylight or good artificial light. Always wear safety glasses with side shields. Everyday glasses have only impact resistant lenses. They are NOT safety glasses. Following this rule will reduce the risk of eye injury. Use face mask if conditions are dusty. Wear safety glasses or goggles that are marked to comply with ANSI Z87.1 standard when operating this product. Use the right appliance. Do not use the lawn mower for any job except that for which it is intended. Do not force the lawn mower. It will do the job better and safer at the rate for which it was designed. Stay alert, watch what you are doing, and use common sense when operating the lawn mower. Do not operate the mower while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the lawn mower may result in serious personal injury. Keep machine in good working condition. Keep blades sharp and guards in place and in working order. Check all nuts, bolts, and screws at frequent intervals for proper tightness to be sure the equipment is in safe working condition. Stop the motor and wait until the blade comes to a complete stop before cleaning the lawn mower, removing the grass catcher, or unclogging the discharge guard. When not in use, mower should be stored indoors in a dry, locked-up place out of the reach of children. Important Safety Instructions

24 24 Important Safety Instructions To reduce the risk of electric shock, this product has a polarized plug (one blade is wider than the other) and will require the use of a polarized extension cord. The plug will fit into a polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension cord will require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug, extension cord receptacle, or extension cord plug in any way. Do not abuse the cord. Never use the cord to pull the lawn mower or to disconnect the plug from an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords immediately. Damaged cords increase the risk of electric shock. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.) of at least 14 is recommended for an extension cord 50 (15.24 m) feet or less in length. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. WARNING: Use outdoor extension cords marked SW-A, SOW-A, STW-A, STOW-A, SJW-A, SJT-A, SJTW-A,or SJTOW-A. These cords are rated for outdoor use and reduce the risk of electric shock. Ground Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the lawn mower. Receptacles are available having built-in GFCI protection and may be used for this measure of safety. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free of oil or grease. SPECIFIC SAFETY RULES Do not operate the mower without the entire grass catcher, discharge guard, rear guard, or other safety protective devices in place and working. Follow manufacturer s instructions for proper operation and installation of accessories. Only use accessories approved by the manufacturer. Clear the work area before each use. Remove all objects such as rocks, sticks, wire, bones, toys, or other objects which can be thrown by the blade. Stay behind the handle when the motor is running. Avoid holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could cause a slip-and-fall accident. Do not mow near drop-offs, ditches, or embankments. Mow across the face of slopes, never up and down. Exercise extreme caution when changing direction on slopes. Plan your mowing pattern to avoid discharge of material toward roads, sidewalks, bystanders, and the like. Do not mow on wet grass or excessively steep slopes. Poor footing could cause a slip-and-fall accident. Walk, never run. Use extra care when approaching blind corners, shrubs, trees, or other objects that may block your view.

25 25 Do not pull the mower backward unless absolutely necessary. If you must back the mower away from a wall or obstruction, first look down and behind to avoid tripping. Never direct discharged material toward anyone. Avoid discharging material against a wall or obstruction. Material may ricochet back toward the operator. Stop the blade when crossing gravel surfaces. Objects struck by the lawn mower blade can cause severe injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to each mowing. If the lawn mower strikes a foreign object, follow these steps: Stop the lawn mower and release the switch lever. Disconnect the power cord. Thoroughly inspect the mower for any damage. Repair any damage before restarting and continuing to operate the mower. Stop the motor, disconnect the power cord, and wait until the blade comes to a complete stop before removing the grass catcher or unclogging the chute. The cutting blade continues to rotate for a few seconds after the motor is shut off. Never place any part of the body in the blade area until you are sure the blade has stopped rotating. Disconnect the plug from power source before making any adjustments, changing accessories, or storing the lawn mower. Such preventive safety measures reduce the risk of starting the product accidentally. If the mower should start to vibrate abnormally, stop the motor and check immediately for the cause. Vibration is generally a warning of trouble. Service on the product must be performed by qualified repair personnel only. Service or maintenance performed by unqualified personnel could result in injury to the user or damage to the product. Use only identical replacement parts when servicing the product. Use of unauthorized parts may create a risk of serious injury to the user, or damage to the product. If the power supply cord is damaged, it must be replaced only by the manufacturer or by an authorized service centre to avoid risk. To reduce the risk of injury. inspect catcher assembly frequently and replace with recommended replacement if there are signs of wear or deterioration. Save these instructions. Refer to them frequently and use them to instruct others who may use this product. If you loan someone this product, loan them these instructions also. Important Safety Instructions WARNING: This machine is capable of inflicting serious injuries if not used properly. Before you begin working with the machine, read the operating instructions carefully and familiarize yourself with the controls and the proper use of the machine. Keep these instructions in a safe place where you will always be able to refer to this information.

26 26 Warranty WARRANTY For TWO YEARS from the date of purchase within Canada, YARDWORKS CANADA will, at its option, repair or replace for the original purchaser, free of charge, any part or parts found to be defective in material or workmanship. This warranty does not cover: Any part that has become inoperative due to misuse, commercial use, abuse, neglect, accident, improper maintenance, or alteration; or The unit, if it has not been operated and/or maintained in accordance with the owner s manual; or Normal wear, except as noted below; Routine maintenance items such as lubricants, blade sharpening; Normal deterioration of the exterior finish due to use or exposure. Full One Hundred Twenty Days Warranty on Normal Wear Parts: Normal wear parts are defined as blade adaptors, blades, grass bags and tires. These parts are warranted to the original purchaser to be free from defects in material and workmanship for a period of one hundred twenty (120) days from the date of retail purchase. How to Obtain Service: Warranty service is available by calling the toll-free helpline, at The factory will not accept the return of a complete unit unless prior written permission has been extended by YARDWORKS CANADA. Transportation Charges: Transportation charges for the movement of any power equipment unit or attachment are the responsibility of the purchaser. The purchaser must pay transportation charges for any part submitted for replacement under this warranty unless such return is requested in writing by YARDWORKS CANADA. Other Warranties: All other warranties, express or implied, including any implied warranty of merchantability is limited in its duration to that set forth in this express limited warranty. The provisions as set forth in this warranty provide the sole and exclusive remedy of YARDWORKS CANADA obligations arising from the sale of its products. YARDWORKS CANADA will not be liable for incidental or consequential loss or damage.

27 27 Exploded View

28 28 Parts List Item Part NO. Description QTY 1 GM98BX X1.01 Rear exhaust door assembly 1 2 GM98BX X1.01 Motor cover assembly 1 3 GD31BX X1.03 Motor assembly WOCSDX.17.PJ Wedge belt 1 4 GM17BX X1.03 Left fixing assembly 1 5 TOQTGX.X0.01 Press board assembly 1 6 TGQTGL X1.01 Rear Wheel assembly (255mm) BOC2YX.14.NS Rear Locking Wheel Cap 2 7 TGQTGL X1.01 Front Wheel assembly (170mm) BOC2YX.13.NS Front Locking Wheel Cap 2 8 GMD2BX X2.01 Deck assembly 1 9 GM90BX.A0.02 Blade assembly BOA4FL M8*20 / M8X20 Blade Bolt 1 10 GD41BX.A0.09 Front axle press board assembly 2 11 GM90BX Front axle assembly 1 12 TOTHYL X1.02 Height Adjustment spring assembly 1 13 GM01BX.A0.08 Height connecting rod assemaly 1 14 GM01BX X3.01 Height adjustment Selector assembly 1 15 GM01BX.X0.03 Height adjusting handle assembly 1 16 GM01BX X1.01 Rear axle press board assembly 2 17 GM90BX Rear axle assembly 1 18 GM90BX X3.01 Roller assembly GM90BX Left bracket of the roller GM90BX Right bracket of the roller GM90BX Roller 1 19 GM17BX X1.03 Right fixing assembly 1 20 GM98BX X1.01 Safety flap assembly 1 21 GM98BX Collection box assembly 1 22 GM98BX X1.01 Complete Handle assembly TGDQ15.D0.00 Switch box assembly 1 23 GM90BX Mulch plug 1