Parts List Supplement for ETL/CSA Dryers. Parts Manual PNEG Date: Version: 2.0 PNEG-1763

Transcription

1 Parts List Supplement for ETL/CSA Dryers Parts Manual PNEG-1763 Version: 2.0 Date: PNEG-1763

2 All information, illustrations, photos and specifications in this manual are based on the latest information available at the time of publication. The right is reserved to make changes at any time without notice. 2 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

3 Table of Contents Contents Chapter 1 Safety...4 Safety Guidelines... 4 Cautionary Symbols Definitions... 5 Safety Cautions... 6 Safety Sign-Off Sheet... 9 Chapter 2 Electrical...10 Lower Control Boxes - ETL Dryers Vision Fan/Heater Control Box Vision Upper Control Box Fill Switch Assembly (Cover Removed) Discharge Switch (Cover Opened) Chapter 3 Fan/Heater Fuel Manifolds...13 Orifice Chart for Canadian Grain Dryers Pipe Train (LP) LP CSA Pipe Train Regulator Assembly (PTA-REG-CSA) " LP CSA Pipe Train (PTA-28LP-CSA) " LP CSA Pipe Train (PTA-36LP-CSA) " LP CSA Pipe Train (PTA-40LP-CSA)...22 Pipe Train (Natural Gas) " NG CSA Pipe Train (PTA-28NG-CSA) " NG CSA Pipe Train (PTA-36NG-CSA) " NG CSA Pipe Train (PTA-40NG-CSA)...28 Vaporizer Mounting Assembly 26"-28" CSA Fan/Heaters Vaporizer (D )...30 Mounting Assembly 36" CSA Fan/Heaters Vaporizer (D )...32 Mounting Assembly 40" and 42" CSA Fan/Heaters Vaporizer (D )...34 Mounting Assembly 42" 40 HP CSA Fan/Heaters Vaporizer (D )...36 Chapter 4 LP Supply Lines...38 Manifold, Supply LP Assembly CSA 1 Fan/Heater (SL-CSA-LP-1F) Manifold, Supply LP Assembly CSA 2 Fan/Heater (SL-CSA-LP-2F) CSA Supply Line, LP Base Module (SL-CSA-B2F-L) CSA Supply Line, LP Middle 1 Fan Module (SL-CSA-M1F-L) CSA Supply Line, LP Middle 2 Fan Module (SL-CSA-M2F-L) CSA Supply Line, LP Top 1 Fan Module (SL-CSA-T1F-L) CSA Supply Line, LP Top 2 Fan Module (SL-CSA-T2F-L) Chapter 5 Natural Gas Supply Lines...52 CSA Supply Line, NG Base Module (SL-CSA-B2F-N) CSA Supply Line, NG Middle 1 Fan Module (SL-CSA-M1F-N) CSA Supply Line, NG Top 1 Fan Module (SL-CSA-T1F-N) CSA Supply Line, NG Middle and Top 2 Fan Module (SL-CSA-T2F-N) Manifold, Supply NG Assembly CSA 1 Fan/Heater (SL-CSA-NG-1F) Manifold, Supply NG Assembly CSA 2 Fan/Heater (SL-CSA-NG-2F) Chapter 6 Warranty...69 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 3

4 1. Safety Safety Guidelines Safety guidelines are general-to-specific safety rules that must be followed at all times. This manual is written to help you understand safe operating procedures and problems that can be encountered by the operator and other personnel when using this equipment. Save these safety guidelines for future reference. As owner or operator, you are responsible for understanding the requirements, hazards, and precautions that exist and to inform others as required. Unqualified persons must stay out of the work area at all times. Alterations must not be made to the equipment. Alterations can produce dangerous situations resulting in SERIOUS INJURY or DEATH. This equipment must be installed in accordance with the current installation codes and applicable regulations, which must be carefully followed in all cases. Authorities having jurisdiction must be consulted before installations are made. When necessary, you must consider the installation location relative to electrical, fuel and water utilities. Personnel operating or working around equipment must read this manual. This manual must be delivered with equipment to its owner. Failure to read this manual and its safety instructions is a misuse of the equipment. ST PNEG-1763 Parts List Supplement for ETL/CSA Dryers

5 Cautionary Symbols Definitions 1. Safety Cautionary symbols appear in this manual and on product decals. The symbols alert the user of potential safety hazards, prohibited activities and mandatory actions. To help you recognize this information, we use the symbols that are defined below. DANGER WARNING CAUTION NOTICE This symbol indicates an imminently hazardous situation which, if not avoided, will result in serious injury or death. This symbol indicates a potentially hazardous situation which, if not avoided, can result in serious injury or death. This symbol indicates a potentially hazardous situation which, if not avoided, can result in minor or moderate injury. This symbol is used to address practices not related to personal injury. This symbol indicates a general hazard. This symbol indicates a prohibited activity. This symbol indicates a mandatory action. ST PNEG-1763 Parts List Supplement for ETL/CSA Dryers 5

6 1. Safety Safety Cautions Use Personal Protective Equipment Use appropriate personal protective equipment: Eye Protection Respiratory Protection Foot Protection Hearing Protection Head Protection Fall Protection Hand Protection Wear clothing appropriate to the job. Remove all jewelry. Tie long hair up and back. ST Follow Safety Instructions Warning: If the information in the manual is not followed exactly, a fire or explosion can result, causing property damage, personal injury or loss of life. Carefully read all safety messages in this manual and safety signs on your machine. Keep signs in good condition. Replace missing or damaged safety signs. Be sure new equipment components and repair parts include the current safety signs. Replacement safety signs are available from the manufacturer. Learn how to operate the machine and how to use controls properly. Do not let anyone operate without instruction. If you do not understand any part of this manual or need assistance, contact your dealer. Retain these instructions for future reference. ST PNEG-1763 Parts List Supplement for ETL/CSA Dryers

7 1. Safety For Your Safety If you smell gas: Do not try to light any appliance. Extinguish any open flames. Do not touch any electrical switch. Immediately call your gas supplier. Follow the gas supplier s instructions. If you cannot reach your gas supplier, call the fire department. The use and storage of gasoline and other flammable vapors and liquids in open containers in the vicinity of this appliance is hazardous. Improper installation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing or servicing this equipment. Installation and service must be performed by a qualified installer, service agency or the gas supplier. ST Maintain Equipment and Work Area Understand service procedures before doing work. Keep area clean and dry. Do not service equipment while it is operating. Disconnect and lock-out power and fuel supply before entering equipment or before performing maintenance. Keep your equipment in proper working condition. Replace worn or broken parts immediately. Depressurize the fuel train before disassembling for service. Allow the fan to operate for 20 minutes with the burner off to purge products of combustion and to cool the components before entering. Check regularly for any developing gas plumbing leaks. Do not operate the dryer if any gas leak is detected. Shut down and repair before further operation. ST PNEG-1763 Parts List Supplement for ETL/CSA Dryers 7

8 1. Safety Handle and Use Equipment Properly Equipment is intended for the use of grain drying only. Any other use is a misuse of this equipment. The operating instructions in this manual pertain to the common cereal grains as indicated. When drying any other grain, contact GSI for additional recommendations. On LP fired units, set pressure regulator to avoid excessive gas pressure applied to the burner during ignition and operation. Do not exceed maximum recommended drying temperatures. Equipment has sharp edges that can cause serious injury. To avoid injury, handle sharp edges with caution and use proper protective clothing and equipment at all times. All guards must be in place before and during operation. Images of guards removed in this manual are for illustration purposes only. Use caution when working around high-speed fans, gas burners, augers and auxiliary conveyors which can start automatically. Keep hands, feet, and clothing away from moving parts. Do not bypass any safety device or interlock. Do not enter the dryer or bin while it is operating. Do not operate in an area where combustible material will be drawn into the dryer. ST Install and Operate Electrical Equipment Properly Electrical controls must be installed by a qualified electrician and must meet the standards set by applicable local codes (National Electrical Code for the US, Canadian Electric Code, or EN60204 along with applicable European Directives for Europe). Lock-out power source before making adjustments, cleaning, or maintaining equipment. Make sure all equipment and bins are properly grounded ST PNEG-1763 Parts List Supplement for ETL/CSA Dryers

9 1. Safety Exercise Caution When Drying Flammable Grains Be aware that some grains are highly flammable including, but not limited to, rapeseed, canola, linseed, sunflower and milo. All grain and seed must be whole (minimal cracking or crushing), clean, and dust free before drying. Avoid dust and chaff from being drawn into the fan and heater. To reduce risk of fire, keep the fan, heater, drying plenum, and ducts clean at all times. In the event of a fire (or suspected fire): 1. Shut down the entire dryer. 2. Turn off fuel at the tank or supply valve. 3. Shut off and lock electrical power. 4. Evacuate the area. 5. Call the fire department. ST Safety Sign-Off Sheet Below is a sign-off sheet that can be used to verify that all personnel have read and understood the safety instructions. This sign-off sheet is provided for your convenience and personal record keeping. Date Employee Name Supervisor Name ST-0007 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 9

10 1. Electrical Lower Control Boxes - ETL Dryers CD-0244FT-CSA CD-0244GT-CSA Enclosure, DCB Computer Box Assembly - FFI Dri-Tek Plus CSA NEMA Type 3R Orange Tinted Window Enclosure, DCB Computer Box Assembly - GSI Vision CSA NEMA Type 3R Ochre Tinted Window Qty 1 Fan 2 Fan 3 Fan 4 Fan 5 Fan 6 Fan D Filter, Ferrite Bead Fair-Rite Vision Fan/Heater Control Box Control box enclosure (CD-FHCBX-CSA) Mounting plate (D ) Fenwal flame detection board (HF-4624-CSA) Figure 1A 10 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

11 1. Electrical Vision Upper Control Box Enclosures (CD-0277F-CSA - 1 and 2 Fan FFI) (CD-0277G-CSA - 1 and 2 Fan GSI) (CD-0283F-CSA - 6 Fan FFI) (CD-0283G-CSA - 6 Fan GSI) Dryer network I/O board Terminal strip SCR Circuit board (D ) Line filter (D ) Figure 1B PNEG-1763 Parts List Supplement for ETL/CSA Dryers 11

12 1. Electrical Fill Switch Assembly (Cover Removed) Solid state tilt switch (D ) Figure 1C Discharge Switch (Cover Opened) Solid state tilt switch (D ) Figure 1D 12 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

13 2. Fan/Heater Fuel Manifolds Orifice Chart for Canadian Grain Dryers Fan Model Horsepower Part # Orifice Size Max Million LP NG Inches BTU/HR HF-7087 Brass 0.219" Brass HF " THF-3139 Brass 0.250" Brass THF " THF-3242 Brass 0.281" Brass THF " CD-0150 Brass 0.328" Brass THF " THF-3058 Brass 0.344" Brass THF " THF-3245 Brass 0.359" Brass THF " THF-3247 Brass 0.375" Brass THF " THF-3249 Brass 0.391" Brass THF " THF-3059 Brass 0.438" Brass THF " THF-3252 Brass 0.453" Brass THF " PNEG-1763 Parts List Supplement for ETL/CSA Dryers 13

14 2. Fan/Heater Fuel Manifolds Pipe Train (LP) LP CSA Pipe Train Regulator Assembly (PTA-REG-CSA) 2009 through August 2010 Production 14 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

15 2. Fan/Heater Fuel Manifolds LP CSA Pipe Train Regulator Assembly (PTA-REG-CSA) Parts List Ref # Part # Description Qty 1 D Elbow, 3/4"-90 SCH 80 Black Flush Bushing 3/4" to 1/2" 2 3 D Nipple, 1/2" x 1-1/2" SCH 80 Black Strainer Assembly 1/2" with Plug Nipple, 3/4" x 3" SCH 80 Black 1 6 D Regulator, LP 5-20 PSI Spring, 3/4" NPT 1 7 THH-4125 Nipple, 3/4" x 2" SCH 40 Black Flush Bushing 1" to 3/4" 3 9 D Tee, 1" x 1" x 3/4" 1 10 THH-4121 Nipple, 3/4" Close SCH 40 Black 3 11 THH-4141 Bell, Reducer 3/4" to 1/2" SCH D Switch, Screw-In Vapor High-Limit Set at 180 F 1 13 THH-4149 Elbow, 3/4" x 1/2" Reducing 90 SCH 40 Black 1 14 FH-1310 Cord Connector, Heyco 1 15 WR-182SJOWA Wire, 18/2 Type Sjow-A Black x 4' 1 16 THH-4124 Tee, 3/4" x 3/4" x 3/4" SCH 40 Black 1 17 D Valve, Relief PSI Spring LP, 1" NPT 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 15

16 2. Fan/Heater Fuel Manifolds LP CSA Pipe Train Regulator Assembly (PTA-REG-CSA) (Continued) September 2010 Production and After 16 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

17 2. Fan/Heater Fuel Manifolds LP CSA Pipe Train Regulator Assembly (PTA-REG-CSA) Parts List Ref # Part # Description Qty 1 THH-4158 Tee, 3/4'' x 1/4'' x 3/4'' SCH 40 Black Plug, 1/4" NPT Square Black Flush Bushing 3/4'' to 1/2'' 1 4 D Nipple, 1/2" x 1-1/2" SCH 80 Black 1 5 HH-1251 Strainer, 1/2" Y 250# WOG SCH 80 Black Nipple, 3/4" x 3" SCH 80 Black 1 7 D Regulator, LP 5-20 PSI Spring, 3/4'' NPT 1 8 THH-4125 Nipple, 3/4'' x 2'' SCH 40 Black 3 9 THH-4174 Tee, 3/4'' x 1/2'' x 3/4'' SCH THH-4124 Tee, 3/4" x 3/4" x 3/4" SCH 40 Black Bushing, Flush 1'' to 3/4'' 1 12 D Valve, Relief PSI Spring LP, 1" NPT 1 13 THH-4121 Nipple, 3/4'' Close SCH 40 Black 2 14 D Switch, Screw-In Vapor Hi-Limit Set at 180 F CSA 1 15 D Coupler, 1/2" SCH 40 Black 1 16 THH-4120 Elbow, 3/4"-90 SCH 40 Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 17

18 2. Fan/Heater Fuel Manifolds 28" LP CSA Pipe Train (PTA-28LP-CSA) 18 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

19 28" LP CSA Pipe Train (PTA-28LP-CSA) Parts List 2. Fan/Heater Fuel Manifolds Ref # Part # Description Qty 1 THH-4120 Elbow, 3/4"-90 SCH 40 Black 3 2 THH-4125 Nipple, 3/4'' x 2'' SCH 40 Black Valve, Solenoid 3/4'' NPT 115V Din 50 PSI Maximum 1 4 THH-4066 Elbow, 3/4''-90 Street SCH 40 Black Valve, Solenoid 3/4'' NPT 115V Din Bypass 30 PSI Maximum Nipple, 3/4" x 3" SCH 80 Black 2 7 THH-4154 Tee, 3/4"-3/4"-1/4" SCH 40 Black 1 8 D Valve, 3/4" NPT Full Port, Lever, CSA, Brass Nipple, 3/4" x 1-1/2" SCH 40 Black 2 10 THH-4121 Nipple, 3/4" Close SCH 40 Black 2 11 THH-4124 Tee, 3/4" x 3/4" x 3/4" SCH 40 Black Flush Bushing 1" to 3/4" 1 13 D Valve, Relief PSI Spring LP, 1" NPT 1 14 THH-4174 Tee, 3/4'' x 1/2'' x 3/4'' SCH D Switch, Screw-in Vapor Hi-Limit Set at 180 F CSA 1 16 D Coupler, 1/2" SCH 40 Black 1 17 D Regulator, LP 5-20 PSI Spring, 3/4'' NPT 1 18 THH-4158 Tee, 3/4'' x 1/4'' x 3/4'' SCH 40 Black Flush Bushing 3/4'' to 1/2'' 1 20 D Nipple, 1/2" x 1-1/2" SCH 80 Black 1 21 HH Strainer, 1/2" Y 250# WOG SCH 80 Black Plug, 1/4" NPT Square Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 19

20 2. Fan/Heater Fuel Manifolds 36" LP CSA Pipe Train (PTA-36LP-CSA) 20 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

21 36" LP CSA Pipe Train (PTA-36LP-CSA) Parts List 2. Fan/Heater Fuel Manifolds Ref # Part # Description Qty 1 PTA-REG-CSA Regulator Assembly, 36" LP with Relief + Vapor Hi-Limit - CSA 1 2 THH-4120 Elbow, 3/4"-90 SCH 40 Black 2 3 THH-4125 Nipple, 3/4'' x 2'' SCH 40 Black Valve, Solenoid 3/4'' NPT 115V Din 50 PSI Maximum 1 5 THH-4066 Elbow, 3/4''-90 Street SCH 40 Black Valve, Solenoid 3/4'' NPT 115V Din Bypass 30 PSI Maximum 1 7 HH-6332 Nipple, 3/4'' x 3-3/4'' SCH 40 Black 1 8 THH-4154 Tee, 3/4"-3/4"-1/4" SCH 40 Black 1 9 HH-7102 Nipple, 3/4'' x 2-3/4'' SCH 40 Black 1 10 D Valve, 3/4" NPT Full Port, Lever, CSA, Brass 1 11 THH-4121 Nipple, 3/4'' Close SCH 40 Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 21

22 2. Fan/Heater Fuel Manifolds 40" LP CSA Pipe Train (PTA-40LP-CSA) 22 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

23 40" LP CSA Pipe Train (PTA-40LP-CSA) Parts List 2. Fan/Heater Fuel Manifolds Ref # Part # Description Qty Bushing, Flush 1'' to 3/4'' 1 2 PTA-REG-CSA Regulator Assembly, 40"/42" LP with 2 Reliefs + Vapor Hi-Limit-CSA Valve, Solenoid 1'' NPT 115V Din 25 PSI Max Asco Rebuild Kit # THH-4151 Nipple, 1'' x 3'' SCH 40 Black 2 5 THH-4115 Elbow, 1"-90 SCH 40 Black Nipple, 1" x 2" SCH 40 Black Valve, Solenoid 1'' NPT 115V Din with Bypass 30 PSI 1 8 THH-4152 Tee, 1" x 1" x 1/4" SCH 40 Black 1 9 D Valve, 1" NPT Full Port, Lever, CSA, Brass 1 10 THH-4117 Nipple, 1" Close SCH 40 Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 23

24 2. Fan/Heater Fuel Manifolds Pipe Train (Natural Gas) 28" NG CSA Pipe Train (PTA-28NG-CSA) 24 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

25 28" NG CSA Pipe Train (PTA-28NG-CSA) Parts List 2. Fan/Heater Fuel Manifolds Ref # Part # Description Qty Valve, Solenoid 3/4'' NPT 115V Din 50 PSI Maximum Nipple, 3/4" x 1-1/2" SCH 40 Black Elbow, 1'' to 3/4'' 1 4 D Nipple, 1" x 3-1/2" SCH 40 Black Valve, Solenoid 1'' NPT 115V Din Nipple, 1" x 4" SCH 40 Black 1 7 THH-4115 Elbow, 1"-90 SCH 40 Black 1 8 THH-4125 Nipple, 3/4" x 2" SCH 40 Black 2 9 THH-4066 Elbow, 3/4''-90 Street SCH 40 Black Valve, Solenoid 3/4'' NPT 115V Din Bypass 30 PSI Maximum Nipple, 3/4" x 3" SCH 80 Black 1 12 THH-4154 Tee, 3/4"-3/4"-1/4" SCH 40 Black 1 13 D Valve, 3/4" NPT Full Port, Lever, CSA, Brass 1 14 THH-4120 Elbow, 3/4"-90 SCH 40 Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 25

26 2. Fan/Heater Fuel Manifolds 36" NG CSA Pipe Train (PTA-36NG-CSA) 26 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

27 36" NG CSA Pipe Train (PTA-36NG-CSA) Parts List 2. Fan/Heater Fuel Manifolds Ref # Part # Description Qty 1 THH-4164 Elbow 1''-90 Street SCH 40 Black Valve, Solenoid 1'' NPT 115V Din 2 3 THH-4151 Nipple, 1'' x 3'' SCH 40 Black Nipple, 1'' x 2" SCH 40 Black 3 5 THH-4115 Elbow, 1"-90 SCH 40 Black Valve, Solenoid 1'' NPT 115V Din with Bypass 1 7 THH-4152 Tee, 1" x 1" x 1/4" SCH 40 Black 1 8 D Valve, 1" NPT Full Port, Lever, CSA, Brass 1 9 THH-4117 Nipple, 1" Close SCH 40 Black Elbow, 1'' to 3/4'' 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 27

28 2. Fan/Heater Fuel Manifolds 40" NG CSA Pipe Train (PTA-40NG-CSA) 28 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

29 40" NG CSA Pipe Train (PTA-40NG-CSA) Parts List 2. Fan/Heater Fuel Manifolds Ref # Part # Description Qty 1 THH-4164 Elbow, 1"-90 Street SCH 40 Black Valve, Solenoid 1" NPT 115V Din 25 PSI Max Asco Rebuild Kit # THH-4151 Nipple, 1'' x 3'' SCH 40 Black Nipple, 1" x 2" SCH 40 Black 3 5 THH-4115 Elbow, 1"-90 SCH 40 Black Valve, Solenoid 1" NPT 115V Din with Bypass 30 PSI Max Asco Rebuild KI 1 7 THH-4152 Tee, 1" x 1" x 1/4" SCH 40 Black 1 8 D Valve, 1" NPT Full Port, Lever, CSA, Brass 1 9 THH-4117 Nipple, 1" Close SCH 40 Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 29

30 2. Fan/Heater Fuel Manifolds Vaporizer Mounting Assembly 26"-28" CSA Fan/Heaters Vaporizer (D ) 30 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

31 2. Fan/Heater Fuel Manifolds Mounting Assembly 26"-28" CSA Fan/Heaters Vaporizer (D ) Parts List Ref # Part # Description Qty 1 D Vaporizer Support Plate Black B Vaporizer Adjusting Weldment 1/2" 1 3 CD-0414 Vaporizer Coil 26"-28" 3 Wrap 1 4 S-6606 Flange Bolt 5/16"-18 x 3/4" ZN Grade S-3611 Flange Nut 5/16"-18 YDP Grade S-1430 Flat Washer, 1/4" USS ZN Grade S-9036 Screw, SMSB #8 x 3/8" HH ZN 4 8 HH-4847 Elbow, 1/2"-90 SCH 80 Black 2 9 D Hose, LP Gas 3/8'' x 24'' CGA/UL 350 PSI Max Operating Pressure 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 31

32 2. Fan/Heater Fuel Manifolds Mounting Assembly 36" CSA Fan/Heaters Vaporizer (D ) 32 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

33 2. Fan/Heater Fuel Manifolds Mounting Assembly 36" CSA Fan/Heaters Vaporizer (D ) Parts List Ref # Part # Description Qty 1 D Vaporizer Support Plate Black B Vaporizer Adjusting Weldment 1/2" 1 3 HF-7207 Vaporizer Coil 36"-42" HP 1/2" 3 Wrap 19" Diameter 1 4 S-6606 Flange Bolt 5/16"-18 x 3/4" ZN Grade S-3611 Flange Nut 5/16"-18 YDP Grade S-1430 Flat Washer 1/4" USS ZN Grade S-9036 Screw, SMSB #8 x 3/8" HH ZN 4 8 HH-4847 Elbow, 1/2"-90 SCH 80 Black 2 9 D Hose, LP Gas 3/8'' x 24'' CGA/UL 350 PSI Max Operating Pressure 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 33

34 2. Fan/Heater Fuel Manifolds Mounting Assembly 40" and 42" CSA Fan/Heaters Vaporizer (D ) 34 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

35 2. Fan/Heater Fuel Manifolds Mounting Assembly 40" and 42" CSA Fan/Heaters Vaporizer (D ) Parts List Ref # Part # Description Qty 1 D Vaporizer Support Plate Black 1 2 S-1430 Flat Washer 1/4" USS ZN Grade S-9036 Screw, SMSB #8 x 3/8" HH ZN 4 4 D Vaporizer Adjusting Weldment 3/4" 1 5 S-6606 Flange Bolt 5/16"-18 x 3/4" ZN Grade S-3611 Flange Nut 5/16"-18 YDP Grade HF-7251 Vaporizer 3/4" 3 Wrap 36"-42" 1 8 D Elbow, 3/4"-90 SCH 80 Black Flush Bushing 3/4" to 1/2" 2 10 D Hose, LP Gas 3/8'' x 24'' CGA/UL 350 PSI Max Operating Pressure 2 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 35

36 2. Fan/Heater Fuel Manifolds Mounting Assembly 42" 40 HP CSA Fan/Heaters Vaporizer (D ) 36 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

37 2. Fan/Heater Fuel Manifolds Mounting Assembly 42" 40 HP CSA Fan/Heaters Vaporizer (D ) Parts List Ref # Part # Description Qty 1 D BK Vaporizer Support Plate, Black 1 2 S-1430 Flat Washer 1/4" USS ZN Grade S-9036 Screw, SMSB 1/4'' x 3/4" HH ZN 4 4 D B Vaporizer Adjusting Weldment 3/4" Painted Black 1 5 S-6606 Flange Bolt 5/16"-18 x 3/4" ZN Grade S-3611 Flange Nut 5/16"-18 YDP Grade HF-7319 Vaporizer Coil (Spiral) 42" 40 HP 1 8 D Elbow, 3/4"-90 SCH 80 Black Flush Bushing 3/4" to 1/2" 2 10 D Hose Assembly, 1/2" x 24" LP Gas ULC/CSA 2 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 37

38 3. LP Supply Lines Manifold, Supply LP Assembly CSA 1 Fan/Heater (SL-CSA-LP-1F) 38 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

39 3. LP Supply Lines Manifold, Supply LP Assembly CSA 1 Fan/Heater (SL-CSA-LP-1F) Parts List Ref # Part # Description Qty 1 HH-1251 Strainer, 1/2" Y 250# WOG SCH 80 Black 1 2 HH-3854 Nipple, 1/2" x 6" SCH 80 Black 1 3 HH-4846 Tee, 1/2" x 1/2" x 1/4" SCH 80 Black 3 4 D Nipple, 1/2" x 1-1/2" SCH 80 Black 5 5 D Valve, 1/2" NPT LP Quick Shut Off CSA 1 6 THH-4058 Tee, 1/2" x 1/2" x 1/2" SCH 80 Black Nipple, 1/2" x 2-1/2" Reducer, 1/2" to 1/4" SCH Plug, 1/4" NPT Square Black 2 10 D Nipple, 1/2" x 55" SCH 80 Black 1 11 TFC-0100 Valve, 1/2" NPT Solenoid LP with Din Connector PSI Valve, Pressure Relief 300 PSI 3 13 D Nipple, 1/2" x 21" SCH 80 Black 1 14 D Plug Vinyl for 1/2" NPT 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 39

40 3. LP Supply Lines Manifold, Supply LP Assembly CSA 2 Fan/Heater (SL-CSA-LP-2F) 40 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

41 3. LP Supply Lines Manifold, Supply LP Assembly CSA 2 Fan/Heater (SL-CSA-LP-2F) Parts List Ref # Part # Description Qty 1 HH-1251 Strainer, 1/2" Y 250# WOG SCH 80 Black 1 2 HH-3854 Nipple, 1/2" x 6" SCH 80 Black 1 3 HH-4846 Tee, 1/2" x 1/2" x 1/4" SCH 80 Black 6 4 D Nipple, 1/2" x 1-1/2" SCH 80 Black 11 5 D Valve, 1/2'' NPT LP Quick Shut Off CSA 3 6 THH-4058 Tee, 1/2'' x 1/2'' x 1/2'' SCH 80 Black 3 7 HH-7095 Nipple, 1/2" x 40" SCH 80 Black 1 8 TFC-0100 Valve, 1/2" NPT Solenoid LP with Din Connector PSI 2 9 HH-1082 Elbow, 1/2"-90 Street SCH 80 Black Valve, Pressure Relief 300 PSI Plug, 1/4" NPT Square Black 3 12 D Nipple, 1/2" x 55" SCH 80 Black 1 13 D Nipple, 1/2" x 3" SCH 80 Black Reducer, 1/2" to 1/4" SCH D Plug Vinyl for 1/2" NPT Nipple, 1/2" x 2-1/2" 80 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 41

42 3. LP Supply Lines CSA Supply Line, LP Base Module (SL-CSA-B2F-L) 42 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

43 3. LP Supply Lines CSA Supply Line, LP Base Module (SL-CSA-B2F-L) Parts List Ref # Part # Description Qty 1 D Strainer, 3/4" Y 250# WOG SCH 80 Black Nipple, 3/4" x 5" SCH 80 Black 1 3 D Tee, 3/4" x 3/4" x 1/4" SCH 80 Black Plug, 1/4" NPT Square Black 2 5 GT Nipple, 3/4" x 2" SCH 80 Black 4 6 D Valve, 3/4" NPT LP Quick Shut Off CSA Tee, 3/4" x 3/4" x 3/4" SCH D Nipple, 3/4" x 25" SCH 80 Black 1 9 D Union, 3/4" Female SCH 80 Black 1 10 D Nipple, 3/4" x 30" SCH 80 Black 1 11 HH-7036 Tee, 3/4" x 3/4" x 1/2" SCH 80 Black 2 12 D Nipple, 1/2" x 1-1/2" SCH 80 Black 8 13 D Valve, 1/2" NPT LP Quick Shut Off CSA 2 14 HH-4846 Tee, 1/2" x 1/2" x 1/4" SCH 80 Black Valve, Pressure Relief 300 PSI 6 16 TFC-0100 Valve, 1/2" NPT Solenoid LP with Din Connector PSI 2 17 D Nipple, 3/4" x 43" SCH 80 Black 1 18 D Reducer, 3/4" x 1/4" Hex Bushing 1 19 D Reducer, 3/4"-1/4" Bell S80 Black Plastic Plug 3/4" Recessed 1 21 HH-1082 Elbow, 1/2"-90 Street SCH 80 Black 2 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 43

44 3. LP Supply Lines CSA Supply Line, LP Middle 1 Fan Module (SL-CSA-M1F-L) 44 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

45 3. LP Supply Lines CSA Supply Line, LP Middle 1 Fan Module (SL-CSA-M1F-L) Parts List Ref # Part # Description Qty 1 D Nipple, 3/4'' x 56" SCH 80 Black 1 2 D Union, 3/4" Female SCH 80 Black 1 3 D Nipple, 3/4" x 50" SCH 80 Black 1 4 HH-7036 Tee, 3/4'' x 3/4'' x 1/2'' SCH 80 Black 1 5 D Pipe Tube, 3/4" x 28" SCH 80 Black 1 6 THH-4046 Coupler, 3/4" SCH 80 Black 1 7 D Plug 3/4" Square 1 8 D Nipple, 1/2" x 1-1/2" SCH 80 Black 4 9 D Valve, 1/2'' NPT LP Quick Shut Off CSA 1 10 HH-4846 Tee, 1/2'' x 1/2'' x 1/4'' SCH 80 Black 2 11 TFC-0100 Valve, 1/2" NPT Solenoid LP with Din Connector PSI Pressure Relief Valve 300 PSI Cap, 3/4'' NPT SCH 40 Black Plastic Plug 3/4" Recessed 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 45

46 3. LP Supply Lines CSA Supply Line, LP Middle 2 Fan Module (SL-CSA-M2F-L) 46 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

47 3. LP Supply Lines CSA Supply Line, LP Middle 2 Fan Module (SL-CSA-M2F-L) Parts List Ref # Part # Description Qty 1 D Nipple, 3/4" x 56" SCH 80 Black 1 2 D Union, 3/4" Female SCH 80 Black 1 3 D Nipple, 3/4" x 35" SCH 80 Black 1 4 HH-7036 Tee, 3/4'' x 3/4'' x 1/2'' SCH 80 Black 2 5 D Nipple, 1/2" x 1-1/2" SCH 80 Black 8 6 D Valve, 1/2'' NPT LP Quick Shut Off CSA 2 7 HH-4846 Tee, 1/2'' x 1/2'' x 1/4'' SCH 80 Black Valve, Pressure Relief 300 PSI 4 9 TFC-0100 Valve, 1/2" NPT Solenoid LP with Din Connector PSI 2 10 D Nipple, 3/4" x 42" SCH 80 Black 1 11 D Square Plug 3/4" Cap, 3/4'' NPT SCH 40 Black Plastic Plug 3/4" Recessed 2 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 47

48 3. LP Supply Lines CSA Supply Line, LP Top 1 Fan Module (SL-CSA-T1F-L) 48 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

49 3. LP Supply Lines CSA Supply Line, LP Top 1 Fan Module (SL-CSA-T1F-L) Parts List Ref # Part # Description Qty 1 D Nipple, 3/4'' x 56" SCH 80 Black 1 2 D Union, 3/4" Female SCH 80 Black 1 3 D Nipple, 3/4" x 50" SCH 80 Black 1 4 HH-7036 Tee, 3/4'' x 3/4'' x 1/2'' SCH 80 Black 1 5 D Nipple, 3/4" x 4" SCH 80 Black 1 6 D Reducer, 3/4''-1/4'' Bell S80 Black Valve, Pressure Relief 300 PSI 3 8 D Nipple, 1/2" x 1-1/2" SCH 80 Black 4 9 D Valve, 1/2'' NPT LP Quick Shut Off CSA 1 10 HH-4846 Tee, 1/2'' x 1/2'' x 1/4'' SCH 80 Black 2 11 TFC-0100 Valve, 1/2" NPT Solenoid LP with Din Connector PSI Cap, 3/4'' NPT SCH 40 Black Plastic Plug 3/4" Recessed 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 49

50 3. LP Supply Lines CSA Supply Line, LP Top 2 Fan Module (SL-CSA-T2F-L) 50 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

51 3. LP Supply Lines CSA Supply Line, LP Top 2 Fan Module (SL-CSA-T2F-L) Parts List Ref # Part # Description Qty 1 D Nipple, 3/4'' x 56" SCH 80 Black 1 2 D Union, 3/4" Female SCH 80 Black 1 3 D Nipple, 3/4" x 35" SCH 80 Black 1 4 HH-7036 Tee 3/4'' x 3/4'' x 1/2'' SCH 80 Black 2 5 D Nipple, 1/2" x 1-1/2" SCH 80 Black 8 6 D Valve, 1/2'' NPT LP Quick Shut Off CSA 2 7 HH-4846 Tee, 1/2'' x 1/2'' x 1/4'' SCH 80 Black Valve, Pressure Relief 300 PSI 5 9 TFC-0100 Valve, 1/2" NPT Solenoid LP with Din Connector PSI 2 10 D Nipple, 3/4" x 42" SCH 80 Black 1 11 D Nipple, 3/4" x 4" SCH 80 Black 1 12 D Reducer, 3/4''-1/4'' Bell S80 Black Cap, 3/4'' NPT SCH 40 Black Plastic Plug 3/4" Recessed 2 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 51

52 4. Natural Gas Supply Lines CSA Supply Line, NG Base Module (SL-CSA-B2F-N) See section A-A on Page 54 for detail of regulator assembly. 52 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

53 4. Natural Gas Supply Lines CSA Supply Line, NG Base Module (SL-CSA-B2F-N) Parts List Ref # Part # Description Qty 1 D Strainer, 2-1/2" Y SCH 40 Black 1 2 D Nipple, 2-1/2" x 4" SCH 40 Black 3 3 D Tee, 2-1/2'' x 2-1/2'' x 1-1/2'' SCH 40 Black 1 4 D Reducer, 1-1/2" x 1/2" Black Hex Bush Plug, 1/4" NPT Square Black 1 6 D Valve, 2-1/2" NPT Full Port, Lever, CSA 1 7 GT Bushing, Reducer 3'' x 2-1/2" Black 1 8 GT Nipple, 3'' x Close SCH 40 Black 2 9 GT Tee, 3" SCH 40 Black 1 10 D Reducer, Bell 3'' NPT x 2'' NPT SCH 40 Black 1 11 GT Plug, Pipe 2'' NPT Square SCH 40 Black 1 12 D Pipe, Tube 3'' x 32" SCH 40 Black 1 13 D Union, 3" Female SCH 40 Black 1 14 D Nipple, 3'' x 35" SCH 40 Black 1 15 D Tee, 3'' x 3'' x 1-1/2'' SCH 40 Black 2 16 D Nipple, 1-1/2" x 3" SCH 40 Black 2 17 D Regulator, NG 5-10 PSI Spring, 1-3/8" Orifice, 1-1/2' NPT 2 18 D Nipple, 1-1/2" Close SCH 40 Black 6 19 D Tee, 1-1/2" x 1-1/2" x 1" SCH 40 Black 2 20 D Valve, 1-1/2" NPT B-Cock Shut Off Brass or Bronze 2 21 D Elbow, 1-1/2" x 1"-90 Reducing Nipple, 1" x 2" SCH 40 Black 4 23 D Valve, Relief PSI Spring NG, 1" NPT Union, Female 1'' SCH Gas Hose, 1'' NPT Male Both End 2 26 D Nipple, 3'' x 44" SCH 40 Black 1 27 D Plug, Pipe 3'' NPT Hex SCH 40 Black Plastic Plug, 2-1/2'' Recessed 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 53

54 4. Natural Gas Supply Lines CSA Supply Line, NG Base Module (SL-CSA-B2F-N) (Continued) 54 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

55 NOTES PNEG-1763 Parts List Supplement for ETL/CSA Dryers 55

56 4. Natural Gas Supply Lines CSA Supply Line, NG Middle 1 Fan Module (SL-CSA-M1F-N) 56 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

57 4. Natural Gas Supply Lines CSA Supply Line, NG Middle 1 Fan Module (SL-CSA-M1F-N) Parts List Ref # Part # Description Qty 1 D Union, 3" Female SCH 40 Black 1 2 D Nipple, 3" x 36-1/2" SCH 40 Black 1 3 D Nipple, 3" x 63" SCH 40 Black 1 4 D Tee, 3" x 3" x 1-1/2" SCH 40 Black 1 5 D Nipple, 1-1/2" Close SCH 40 Black 4 6 D Regulator, NG 5-10 PSI Spring, Orifice, 1-1/2'' NPT 1 7 D Tee, 1-1/2" x 1-1/2" x 1" SCH 40 Black 1 8 D Valve, 1-1/2" NPT B-Cock Shut Off Brass or Bronze 1 9 D Elbow, 1-1/2" x 1"-90 Reducing Nipple, 1" x 2" SCH 40 Black Union, Female 1" SCH Gas Hose, 1" NPT Male Both End 1 13 D Valve, Relief PSI Spring NG, 1" NPT 1 14 D Nipple, 3" x 35" SCH 40 Black 1 15 GT " NPT Coupling 1 16 D Plug, Pipe 3" NPT Hex SCH 40 Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 57

58 4. Natural Gas Supply Lines CSA Supply Line, NG Top 1 Fan Module (SL-CSA-T1F-N) 58 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

59 4. Natural Gas Supply Lines CSA Supply Line, NG Top 1 Fan Module (SL-CSA-T1F-N) Parts List Ref # Part # Description Qty 1 D Union, 3" Female SCH 40 Black 1 2 D Nipple, 3" x 36-1/2" SCH 40 Black 1 3 D Nipple, 3" x 63" SCH 40 Black 1 4 D Tee, 3" x 3" x 1-1/2" SCH 40 Black 1 5 D Nipple, 1-1/2" Close SCH 40 Black 4 6 D Regulator, NG 5-10 PSI Spring, Orifice, 1-1/2'' NPT 1 7 D Tee, 1-1/2" x 1-1/2" x 1" SCH 40 Black 1 8 D Valve, 1-1/2" NPT B-Cock Shut Off Brass or Bronze 1 9 D Elbow, 1-1/2" x 1"-90 Reducing Nipple, 1" x 2" SCH 40 Black Union, Female 1" SCH Gas Hose, 1" NPT Male Both End 1 13 D Valve, Relief PSI Spring NG, 1" NPT 1 14 D Plug, Pipe 3'' NPT Hex SCH 40 Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 59

60 4. Natural Gas Supply Lines CSA Supply Line, NG Middle and Top 2 Fan Module (SL-CSA-T2F-N) 60 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

61 4. Natural Gas Supply Lines CSA Supply Line, NG Middle and Top 2 Fan Module (SL-CSA-T2F-N) Parts List Ref # Part # Description Qty 1 D Nipple, 3" x 41" SCH 40 Black 1 2 D Union, 3" Female SCH 40 Black 1 3 D Nipple, 3" x 44" SCH 40 Black 2 4 D Tee, 3" x 3" x 1-1/2" SCH 40 Black 2 5 D Nipple, 1-1/2" x 3" SCH 40 Black 2 6 D Regulator, NG 5-10 PSI Spring, Orifice, 1-1/2'' NPT 2 7 D Nipple, 1-1/2" Close SCH 40 Black 6 8 D Tee, 1-1/2" x 1-1/2" x 1" SCH 40 Black 2 9 D Valve, 1-1/2'' NPT B-Cock Shut Off Brass or bronze 2 10 D Elbow, 1-1/2" x 1"-90 Reducing Nipple, 1" x 2" SCH 40 Black 4 12 D Valve, Relief PSI Spring NG, 1" NPT Union, Female 1" SCH Gas Hose, 1" NPT Male Both End 2 15 D Plug, Pipe 3" NPT Hex SCH 40 Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 61

62 4. Natural Gas Supply Lines Manifold, Supply NG Assembly CSA 1 Fan/Heater (SL-CSA-NG-1F) See Page 64 for regulator detail. See Page 64 for regulator detail. 62 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

63 4. Natural Gas Supply Lines Manifold, Supply NG Assembly CSA 1 Fan/Heater (SL-CSA-NG-1F) Parts List Ref # Part # Description Qty 1 D Strainer, 1-1/2" Y SCH 80 Black Plastic Plug, 1-3/4'' Recessed 1 3 D Nipple, 1-1/2" Close SCH 40 Black 6 4 TF-1710 Tee, 1-1/2" x 1-1/2" x 1/4" SCH 40 Black 1 5 D Valve, 1-1/2" NPT B-Cock Shut Off Brass or Bronze 2 6 D Nipple, 1-1/2" x 4" SCH 40 Black 1 7 D Tee, 1-1/2" x 1-1/2" x 1-1/2" SCH 40 Black 1 8 D Nipple, 1-1/2" x 3" SCH 40 Black 1 9 D Reducer, Bell 1-1/2'' NPT x 1'' NPT SCH 40 Black 1 10 D Plug, Hex-Head, Black Steel, 1" NPT 1 11 D Nipple, 1-1/2" x 31-1/2" SCH 40 Black 1 12 D Union, 1-1/2" Female SCH 40 Black 1 13 HH-7076 Nipple, 1-1/2" x 60" SCH 40 Black 1 14 D Elbow, 1-1/2"-90 SCH 40 Black 1 15 D Regulator, NG 5-10 PSI Spring, Orifice, 1-1/2'' NPT 1 16 D Tee, 1-1/2" x 1-1/2" x 1" SCH 40 Black 1 17 THH-4117 Nipple, 1" Close SCH 40 Black 1 18 D Valve, Relief PSI Spring NG, 1" NPT 1 19 D Elbow, 1-1/2" x 1"-90 Reducing Nipple, 1" x 2" SCH 40 Black Union, Female 1'' SCH Gas Hose, 1'' NPT Male Both End Plug, 1/4" NPT Square Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 63

64 4. Natural Gas Supply Lines Manifold, Supply NG Assembly CSA 1 Fan/Heater (SL-CSA-NG-1F) (Continued) 64 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

65 NOTES PNEG-1763 Parts List Supplement for ETL/CSA Dryers 65

66 4. Natural Gas Supply Lines Manifold, Supply NG Assembly CSA 2 Fan/Heater (SL-CSA-NG-2F) See section A-A on Page 68 for detail of regulator assembly. See section A-A on Page 68 for detail of regulator assembly. 66 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

67 4. Natural Gas Supply Lines Manifold, Supply NG Assembly CSA 2 Fan/Heater (SL-CSA-NG-2F) Parts List Ref # Part # Description Qty 1 D Strainer, 1-1/2" Y SCH 80 Black Plastic Plug, 1-3/4'' Recessed 1 3 D Nipple, 1-1/2" x 3" SCH 40 Black 5 4 TF-1710 Tee, 1-1/2" x 1-1/2" x 1/4" SCH 40 Black 1 5 D Valve, 1-1/2" NPT B-Cock Shut Off Brass or Bronze 3 6 D Nipple, 1-1/2" x 4" SCH 40 Black 1 7 D Tee, 1-1/2" x 1-1/2" x 1-1/2" SCH 40 Black 2 8 HH-7068 Nipple, 1-1/2" x 24" SCH 40 Black 1 9 D Union, 1-1/2" Female SCH 40 Black 1 10 D Nipple, 1-1/2" x 31-1/2" SCH 40 Black 1 11 D Regulator, NG 5-10 PSI Spring, Orifice, 1-1/2'' NPT 2 12 D Nipple, 1-1/2" Close SCH 40 Black 6 13 D Tee, 1-1/2" x 1-1/2" x 1" SCH 40 Black 2 14 D Elbow, 1-1/2" x 1"-90 Reducing Nipple, 1" x 2" SCH 40 Black 4 16 D Valve, Relief PSI Spring NG, 1" NPT Union, Female 1'' SCH Gas Hose, 1'' NPT Male Both End 2 19 HH-7070 Nipple, 1-1/2" x 54" SCH 40 Black 1 20 D Elbow, 1-1/2"-90 SCH 40 Black 1 21 D Reducer, Bell 1-1/2'' NPT x 1'' NPT SCH 40 Black 1 22 D Plug, Hex-Head, Black Steel, 1" NPT Plug, 1/4" NPT Square Black 1 PNEG-1763 Parts List Supplement for ETL/CSA Dryers 67

68 4. Natural Gas Supply Lines Manifold, Supply NG Assembly CSA 2 Fan/Heater (SL-CSA-NG-2F) (Continued) 68 PNEG-1763 Parts List Supplement for ETL/CSA Dryers

69 5. Warranty GSI Group, LLC Limited Warranty The GSI Group, LLC ( GSI ) warrants products which it manufactures to be free of defects in materials and workmanship under normal usage and conditions for a period of 12 months after sale to the original end-user or if a foreign sale, 14 months from arrival at port of discharge, whichever is earlier. The end-user s sole remedy (and GSI s only obligation) is to repair or replace, at GSI s option and expense, products that in GSI s judgment, contain a material defect in materials or workmanship. Expenses incurred by or on behalf of the end-user without prior written authorization from the GSI Warranty Group shall be the sole responsibility of the end-user. Warranty Extensions: The Limited Warranty period is extended for the following products: GSI further warrants that the portable and tower dryer frame and basket, excluding all auger and auger drive components, shall be free from defects in materials for a period of time beginning on the twelfth (12 th ) month from the date of purchase and continuing until the sixtieth (60 th ) month from the date of purchase (extended warranty period). During the extended warranty period, GSI will replace the frame or basket components that prove to be defective under normal conditions of use without charge, excluding the labor, transportation and/or shipping costs incurred in the performance of this extended warranty. Conditions and Limitations: Product Warranty Period Performer Series Direct Drive Fan Motor 3 Years * Warranty prorated from list price: AP Fans and Flooring All Fiberglass Housings Lifetime 0 to 3 years - no cost to end-user All Fiberglass Propellers Lifetime 3 to 5 years - end-user pays 25% AP and Cumberland Flex-Flo/Pan Feeding System Motors 2 Years 5 to 7 years - end-user pays 50% 7 to 10 years - end-user pays 75% Feeder System Pan Assemblies 5 Years ** Cumberland Feed Tubes (1-3/4" and 2.00") 10 Years * ** Warranty prorated from list price: Feeding/Watering Systems Centerless Augers 10 Years * 0 to 3 years - no cost to end-user Watering Nipples 10 Years * 3 to 5 years - end-user pays 50% Grain Systems Grain Bin Structural Design 5 Years Grain Systems Portable and Tower Dryers 2 Years Motors, burner components and moving parts not included. Farm Fans Portable and Tower Dryer Frames and Portable dryer screens included. Zimmerman 5 Years Internal Infrastructure Tower dryer screens not included. THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE LIMITED WARRANTY DESCRIPTION SET FORTH ABOVE. SPECIFICALLY, GSI MAKES NO FURTHER WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE IN CONNECTION WITH: (I) PRODUCT MANUFACTURED OR SOLD BY GSI OR (II) ANY ADVICE, INSTRUCTION, RECOMMENDATION OR SUGGESTION PROVIDED BY AN AGENT, REPRESENTATIVE OR EMPLOYEE OF GSI REGARDING OR RELATED TO THE CONFIGURATION, INSTALLATION, LAYOUT, SUITABILITY FOR A PARTICULAR PURPOSE, OR DESIGN OF SUCH PRODUCTS. GSI shall not be liable for any direct, indirect, incidental or consequential damages, including, without limitation, loss of anticipated profits or benefits. The sole and exclusive remedy is set forth in the Limited Warranty, which shall not exceed the amount paid for the product purchased. This warranty is not transferable and applies only to the original end-user. GSI shall have no obligation or responsibility for any representations or warranties made by or on behalf of any dealer, agent or distributor. GSI assumes no responsibility for claims resulting from construction defects or unauthorized modifications to products which it manufactured. Modifications to products not specifically delineated in the manual accompanying the equipment at initial sale will void the Limited Warranty. This Limited Warranty shall not extend to products or parts which have been damaged by negligent use, misuse, alteration, accident or which have been improperly/inadequately maintained. This Limited Warranty extends solely to products manufactured by GSI. Prior to installation, the end-user has the responsibility to comply with federal, state and local codes which apply to the location and installation of products manufactured or sold by GSI _1_CR_rev8.DOC (revised January 2014) PNEG-1763 Parts List Supplement for ETL/CSA Dryers 69

70 This equipment shall be installed in accordance with the current installation codes and applicable regulations, which should be carefully followed in all cases. Authorities having jurisdiction should be consulted before installations are made. GSI Group 1004 E. Illinois St. Assumption, IL Phone: Fax: GSI is a worldwide brand of AGCO Corporation. Copyright 2016 by The GSI Group, LLC Printed in the USA CN