SPECIFICATION FOR GRADES OF PASSION FRUIT

Size: px
Start display at page:

Download "SPECIFICATION FOR GRADES OF PASSION FRUIT"

Transcription

1 DRAFT SAINT LUCIA NATIONAL STANDARD DNS 58 (1 st Revision) SPECIFICATION FOR GRADES OF PASSION FRUIT Stage 40 Enquiry Stage February 2014 Copyright SLBS Saint Lucia Bureau of Standards, (2014) No part of this standard shall be reproduced in any form without the prior consent of the Saint Lucia Bureau of Standards in writing. This does not preclude quotation(s) from the standard for the purpose of review or comments. SAINT LUCIA BUREAU OF STANDARDS P. O. BOX CP 5412 BISEE INDUSTRIAL ESTATE CASTRIES ST. LUCIA TEL: ; FAX: ; ; Website:

2 GENERAL STATEMENT The Saint Lucia Bureau of Standards was established under the Standards Act (No. 14 of 1990) and started operations on 01 April A broad-based 15-member Standards Council directs the affairs of the Bureau. The Standards Act gives the Bureau the responsibility to develop and promote standards and codes of practice for products and services for the protection of the health and safety of consumers and the environment as well as for industrial development, in order to promote the enhancement of the economy of Saint Lucia. The Bureau develops standards through consultations with relevant interest groups. In accordance with the provisions of the Standards Act, public comment is invited on all draft standards before they are declared as Saint Lucia National Standards. The Bureau also administers the Metrology Act No. 17 of This legislation gives the Bureau the responsibility to regulate all weights and measures and to manage and co-ordinate the metrication of Saint Lucia. The Bureau operates a Product Certification Scheme applicable to all products for which national standards exist. If a product satisfies all the requirements for certification, a licence to carry the Saint Lucia Standard Mark is issued to the manufacturer of the product. The presence of the mark on a product indicates that the product conforms to all the requirements of a specific national standard and assures consistent quality (of the product) to the consumer. The Bureau is a member body of the International Organisation for Standardisation (ISO), an affiliate member of the International Electrochemical Commission (IEC) and a member of the CARICOM Regional Organisation for Standards and Quality (CROSQ) and the Pan American Standards Commission (COPANT). The Bureau is the local agent for several foreign standards bodies such as the British Standards Institution (BSI) and the ASTM International (formerly known as the American Society for Testing and Materials). The Bureau serves as the enquiry point for the World Trade Organisation (WTO) on matters pertaining to the Technical Barriers to Trade (TBT) Agreement. The Bureau also serves as the National CODEX Alimentarius enquiry point with responsibility for coordinating national positions on CODEX matters. In accordance with good practice for the adoption and application of standards, Saint Lucia National Standards are subject to review every five years. Suggestions for improvements are always welcomed at any time after publication of the standard. ii SLBS 2012

3 STANDARD FOR PASSION FRUIT AMENDMENTS ISSUED SINCE LAST PUBLICATION Amendment no. Date of issue Type of amendment Text(s) affected SLBS 2012 iii

4 ATTACHMENT PAGE FOR SLBS AMENDMENT SHEET iv SLBS 2012

5 DRAFT SAINT LUCIA NATIONAL STANDARD DNS 58 (1 st Revision) SPECIFICATION FOR GRADES OF PASSION FRUIT TECHNICAL COMMITTEE FOR AGRICULTURAL PRODUCTS AND PRACTICES The following persons comprised the Technical Committee which was responsible for the formulation of this standard: Chairman Representing Roycelyn St. Hill Howell Ministry of Commerce Industry & Consumer Affairs, SMALL Enterprise Development Unit (SEDU) Members Ronald Pilgrim Flavien Rodolph Anthia Joshua Rose Mary Perinieau Caribbean Agricultural Research and Development Institute Saint Lucia Marketing Board Ministry of Agriculture, Land, Forestry & Fisheries Fresh Produce Exporters Association Anthony Bonaparte Sir Arthur Lewis Community College Raphael St. Hill National Consumers Association Euthalia Philgence Tzarmallah Haynes (Technical Secretary) Food and Agriculture Organisation (FAO) Office - Ministry of Agriculture, Land, Forestry & Fisheries Saint Lucia Bureau of Standards SLBS 2012 v

6 Contents Page Foreword Scope Normative references Terms and definitions Requirements Size requirements Tolerances Presentation and packaging Labelling requirements Contaminants Hygienic and sanitary requirements... 8 Annex A (informative) Passion fruit Fact sheet... 9 vi SLBS 2012

7 Foreword This national standard is a revision of SLNS 58: 2001 Specification for Passion fruit. This second edition of the standard was done to incorporate advancements in requirements for labelling and grading and as part of the initiative to strengthen certification of select agricultural products, livestock and fish products in Saint Lucia. This second edition of the standard was approved by the Standards Council on. This standard provides requirements for fresh produce commodities, as a tool toward greater quality assurance regulation. Through this, a defined grading system has been established to better reflect and advance improvements in the nature and quality of commodities distributed within and from the Saint Lucia. The intention of this document is therefore to guide the fresh produce industry, through the use of established commodity requirements and specifications for trade, in consistently supplying good quality fresh passion fruit on the market. This Standard was developed in an effort to: a) avoid misunderstanding and confusion among those involved in the marketing chain; b) provide a basis for relating price with quality; c) encourage better selection, packaging and presentation of produce as a means of obtaining greater income overall; d) assist exporters in meeting export market requirements and thereby enhancing their reputation and market position; and e) facilitate implementation of a fresh produce certification scheme. Users of this standard should note that if applied at stages following export, some produce shall show in relation to the requirements of the standard a slight lack of freshness and firmness, and for products in grades other than Grade 1, a slight deterioration due to their development and their tendency to perish. The degree of tolerance for the individual grades is meant to account for abnormal human error in sorting and packing for the deterioration in quality that shall occur between the point of dispatch and receipt and should not be deliberately exploited by the packer. During the revision of this standard considerable assistance was derived from: a) Dr Peter Jaeger (Chemonics). November Study of the market for Rwandan passion Fruit in Europe b) Anon: 2000, The Status of Passion Fruit Growing in Saint Lucia SLBS

8 1 Scope This standard is applicable to the commercial varieties of passion fruits grown from the species Passiflora of the Passifloraceae family to be supplied fresh to the consumer market. This standard is not applicable to passion fruit intended for industrial processing. This standard is based on the requirements of Passiflora edulis Sims but the requirements apply to the rest of the species in the Passifloraceae family. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. SLNS 18 Part 1 Labelling of commodities General requirements; SLCP 6 Code of practice for the packaging and transport of fresh fruits and vegetables; SLCP 7 Code of good agricultural practice for the production of fresh produce; CODEX Alimentarius Commission, CAC/MRL 1 Maximum residue limits (MRL) for pesticides; CODEX Alimentarius Commission, Principles for the establishment and application of microbiological criteria for foods (CAC/GL ); CODEX Alimentarius Commission, CODEX STAN 193 General standard for contaminants and toxins in food and feed. 3 Terms and definitions For the purposes of this document, the following terms and definitions shall apply: 3.1 blemish any physical injury affecting the surface of the fruit, such as scars, scratches or discolored sports which detracts from its natural appearance, but will not significantly affect its shelf life 3.2 clean the passion fruit are free from dirt, foreign material and foreign odors 3.3 correct packed weight the weight placed in the package shall take account of the expected natural weight loss and ensure that the buyer gets the net weight stated on the package 3.4 damage 2 SLBS 2012

9 physical or physiological injury to the fruit, such as decay, chilling injury, insect damage, sunscald, bruises, cracks, wounds or punctures which could lead to the abnormally quick deterioration of the fruit and cause rejection by most consumers 3.5 desired Sized the size requested by the customer 3.6 disease any sign of the growth of mould, fungus or development of dry or soft rots 3.7 fairly fresh the fruit shows signs of shriveling with a wrinkled surface, but not shriveled to the extent that the surface is sunken or grooved 3.8 fresh the fruit are firm, turgid, and bright with a glossy appearance and a little or no signs of shriveling 3.9 insect free no signs of live or dead insects at any stage of development shall be present on or in the fruit or in the package 3.10 lot two or more passion fruit whether or not packaged, but sold as one distinct and separate group 3.11 mature state of development that is acceptable condition to the consumer that allows the passion fruit to ripen with accepatable colour, flavour and texture 3.12 similar varietal characteristics Passion fruit shall be of the same shape, skin and flesh, and flavor 3.13 sound at the time of packing, loading or final shipping point inspection, the passion fruits are free from decay, breakdown, cold/freezing injury, soft or shriveled specimens, overripe specimens or other injury affecting the keeping quality 3.14 well shaped the passion fruit shall have the shape characteristic of the variety 4 Requirements 4.1 Minimum requirements In all grades, subject to the special provisions for each grade and the tolerance allowed, the passion fruit shall be: a) intact; SLBS

10 b) sound: produce affected by rotting or deterioration such as to make it unfit for consumption is excluded; c) clear practically free of any visible foreign matter; d) fresh in appearance, and firm; e) free from insect and/or pests; f) free from diseases; g) free from damage caused by pests affecting the fresh; h) mature; i) of the desired size; j) free of any foreign smell and/or taste; k) of similar varietal characteristic; l) free from cracks in rind; m) firm in consistency; n) free from woodiness; o) free of abnormal external moisture, excluding condensation following removal from cold storage; p) keep the natural wax layer which covers the fruit at harvest The fruit stalk shall be 2 4 mm where applicable. The absence is not considered a defect on condition that the place of the stalk attachment is dry and intact The development and condition of the passion fruit shall be such as to enable them: a) to withstand transportation and handling; b) to arrive in satisfactory condition at the place of destination. 4.2 Grade requirements Grade 1 Passion fruit in this grade shall be of superior quality. They shall have all the typical characteristics and colouring of the variety or cultivar. Passion fruit falling in the grade shall meet the following: a) be fresh; b) be well shaped- smooth and spherical; c) have blemishes not exceeding more than 5 % of the surface area; d) a 10 % variation from the desired size shall be permitted; e) total defect (excluding size) shall not exceed 5 % in any one package with not more than 2 % affected by damage and disease Grade 2 Passion fruit in this grade shall be of good quality. They shall have all the typical characteristics and colouring of the variety or cultivar. a) fairly fresh; b) blemish shall not exceed more than 10 % of the surface area; c) a 20 % variation from the desired side shall be permitted; 4 SLBS 2012

11 d) total defects (excluding size) shall not exceed 10 % in any one package with not more than 2 % affected by damage and disease Grade 3 In the addition to meeting the requirements, passion fruit falling in this grade shall meet the following requirements: a) Fairly fresh; b) Blemish shall not exceed more than 10 % of the surface area; c) A 25 % variation from the desired side shall be permitted; d) Total defects (excluding size) shall not exceed 15 % in any one package with not more than 2 % affected by damage and disease. 4.3 Maturity requirements The passion fruits must be sufficiently developed and display satisfactory ripeness. The development and state of maturity of the passion fruits must be such as to enable them to continue their ripening process and to reach the appropriate degree of ripeness. 5 Size requirements Sizing shall be determined by the diameter of the passion fruit and the cultivar (yellow or purple/pink). The size of pink/purple passion fruit in any grade shall be mm in diameter, though a narrower range shall be specified with different counts per carton (min 30 g and max 50 g). Size Code Diameter mm A B C D E F Weight per fruit per grams The difference between the largest and the smallest passion fruit diameter in any one package shall be not more than 5 mm in all grades. 6 Tolerances 6.1 Tolerance allowance Tolerance in respect of quality and size shall be allowed in each package for produce not satisfying the requirements of the grade indicated. SLBS

12 6.2 Quality tolerance Grade 1 Not more than 5 % by number or weight of passion fruit shall fail to meet the specifications of this grade but meet those of grade 2. Damage shall not exceed more than 2 % at the dispatching stage Grade 2 Not more than 10 % by number or weight of passion fruit shall fail to meet the specifications of this grade but meet those of grade 3. Damage shall not exceed more than 5 % at the dispatching stage Grade 3 Damage shall not exceed more than 10% at the dispatching stage 6.3 Size tolerances Grade 1 Ten per cent (10 %) by number or weight of passion fruit corresponding to the size immediately below or above the size indicated on the package Grade 2 Twenty percent (20 %) by number or weight of passion fruit corresponding to the size immediately below or above the size indicated on the package Grade 3 Twenty percent (25 %) by number or weight of passion fruit corresponding to the size immediately below or above the size indicated on the package 7 Presentation and packaging 7.1 Uniformity The contents of each package shall be uniform and contain only passion fruit of the same origin, variety or commercial type, quality and size. At the time of packing each passion fruit shall be at least 90 % coloured with no damage. The visible part of the package shall be representative of the enter contents. 7.2 Packaging The passion fruit shall be packed in each container in compliance with SLCP 6: 2006 Code of practice for the packaging and transport of fresh fruits and vegetables. The passion fruit shall be packed in a manner that ensures the protection of produce adequately. 6 SLBS 2012

13 The materials used inside the package shall be clean and of an appropriate quality to avoid external or internal damage to the produce. The use of materials, particularly wrapping papers, adhesive labels or stamps bearing trade specifications or commercial indications shall be allowed, provided the printing or labelling has been done with non-toxic ink or glue. Packages shall be free of all foreign matter 7.3 Presentation The passion fruit shall be presented as follows: a) As individual passion fruit (which shall be wrapped) with stalk; b) Packed in micro-perforated bags. 8 Labelling requirements 8.1 Labels shall meet the requirements of SLNS 18 Part 1: Labelling of commodities General requirements. 8.2 Each package of passion fruit shall bear the following particulars, in letters grouped on the same side, legibly and indelibly marked in the official language(s) of the country in which the produce is to be sold, and which are visible from the outside (either printed on the package itself or on a label secured to the package): a) name and address of exporter, distributer, consignee, supplier, packer or dispatcher; b) name of produce including variety or cultivar; c) net weight of package as kg; NOTE The weight stated on the container is the minimum net weight delivered to the customer. d) country of origin NOTE Inclusion of details of district or town where grown, or national, regional or local place name is optional. e) date of packing; and f) grade. 8.3 Optional information may be included on the label including: a) growers or lot identification number; b) storage and ripening temperature requirements; SLBS

14 c) storage conditions and general handling of containers. NOTE 1 NOTE 2 Ripening passion fruit should be stored at 7-10 C in % humidity. Fully ripe passion fruit of the pink/purple cultivar should be stored at 5 7 C; NOTE 3 As high producers of ethene, passion fruit shall not be stored or transported with any produce that is sensitive to ethene. 8.4 The use of red or orange coloured ink should be avoided since these colours are used in the labelling of dangerous goods. 9 Contaminants Passion Fruit shall comply with the maximum residue limits for heavy metals established by the CODEX Alimentarius Commission for this commodity as per CODEX STAN 193 General standard for contaminants and toxins in food and feed. Passion fruit shall comply with the maximum pesticide residue limits established by the CODEX Alimentarius Commission as per CAC/MRL 1 Maximum residue limits (MRL) for pesticides. 10 Hygienic and sanitary requirements It is recommended that passion fruit covered by the provisions of this standard shall be prepared and handled in accordance with the appropriate sections of the latest edition of SLCP 7: 2006 Code of Good Agricultural Practice for the production of fresh produce and other national, regional and international texts which are relevant to this commodity. The passion fruitshall comply with any microbiological criteria established in accordance with the principles for the Establishment and Application of Microbiological Criteria for Foods (CAC/GL ). Passion fruit shall comply with Sanitary and Phyto-Sanitary (SPS) requirements of Saint Lucia and any importing countries. 8 SLBS 2012

15 Annex A (informative) Passion fruit Fact sheet A.1 Passiflora species Passifloraceae There are over 60 true species with edible fruits promising interspecific hybrids also exist. A.1.1 Cultivated varieties Passiflora alata Fragrant Granadilla, Maracuja grande Passiflora cumbalensis Red Banana Passionfruit P. edulis Sims Purple passionfruit, Purple granadilla Passiflora edulis f. flavicarpa Deg. Yellow passionfruit, Yellow granadilla Passiflora mollissima Banana passion fruit, Tacso Passiflora vitifolia Grape-leaf passion fruit A.1.2 Potentially cultivable varieties Passiflora adenopoda Granadilla de monte Passiflora ambigua Granadilla de monte Passiflora ampullacea White-flowered Tacso Passiflora antioquiensis Banana passionfruit Passiflora caerulea Blue-crown passionflower Passiflora coccinea Red Granadilla Passiflora exoniensis Passiflora herbertiana Austrailian passionfruit Passiflora incarnata Maypop Passiflora laurifolia Yellow Granadilla, Jamaica honeysuckle Passiflora ligularis Sweet Granadilla, Sweet Passionfruit Passiflora maliformis Sweet Calabash, Chulupa Passiflora manicata Passiflora mixta Curuba de Indio Passiflora platyloba Acid granadilla Passiflora quadrangularis L. Giantgranadilla Passiflora rubra Pomme de liane zombie Passiflora seemannii Guate-guate Passiflora serrato-digitata Tagua-tagua Passiflora suberosa Cork-stem Passionfruit Passiflora trifoliata Passiflora tripartita Tacso Passiflora trisecta Passiflora warmingii Maracuja mirim SLBS

DRAFT SAINT LUCIA NATIONAL STANDARD DNS/IEC : 2010

DRAFT SAINT LUCIA NATIONAL STANDARD DNS/IEC : 2010 DRAFT SAINT LUCIA NATIONAL STANDARD DNS/IEC 60335-1: 2010 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY PART 1: GENERAL REQUIREMENTS (IEC 60335-1: 2010, IDT) Edition 5.0 (Stage 40 Enquiry Stage) July

More information

UNECE standard FFV-04 (CODEX STAN )

UNECE standard FFV-04 (CODEX STAN ) C0MPARISON STANDARD OF ASPARAGUS CODEX STANDARD FOR ASPARAGUS Concerning the marketing and commercial quality control asparagus I. Definition of produce This standard applies to shoots of asparagus of

More information

CODEX STANDARD FOR ASPARAGUS CODEX STAN

CODEX STANDARD FOR ASPARAGUS CODEX STAN CODEX STAN 225-2001 Page 1 of 6 1. DEFINITION OF PRODUCE CODEX STANDARD FOR ASPARAGUS CODEX STAN 225-2001 This Standard applies to shoots of commercial varieties of asparagus grown from Asparagus officinalis

More information

UNECE STANDARD FFV-04 concerning the marketing and commercial quality control of ASPARAGUS

UNECE STANDARD FFV-04 concerning the marketing and commercial quality control of ASPARAGUS UNITED NATIONS ECONOMIC COMMISSION FOR EUROPE INF. 16 UNECE STANDARD FFV-04 concerning the marketing and commercial quality control of ASPARAGUS 2010 EDITION UNITED NATIONS New York and Geneva, 2010 Page

More information

Agenda Item 4. European Union Mixed Competence Member States Vote. Original text Proposed text Reason for the change / inclusion

Agenda Item 4. European Union Mixed Competence Member States Vote. Original text Proposed text Reason for the change / inclusion Agenda Item 4 CRD3 Paragraph and section number JOINT FAO/WHO FOOD STANDARDS PROGRAMME CODEX COMMITTEE ON FRESH FRUITS AND VEGETABLES 20 th Session Kampala, Uganda, 2 6 October, 2017 COMMENTS ON DRAFT

More information

UNECE STANDARD FFV-22 concerning the marketing and commercial quality control of LETTUCES, CURLED-LEAVED ENDIVES AND BROAD-LEAVED (BATAVIAN) ENDIVES

UNECE STANDARD FFV-22 concerning the marketing and commercial quality control of LETTUCES, CURLED-LEAVED ENDIVES AND BROAD-LEAVED (BATAVIAN) ENDIVES UNECE STANDARD FFV-22 concerning the marketing and commercial quality control of LETTUCES, CURLED-LEAVED ENDIVES AND BROAD-LEAVED (BATAVIAN) ENDIVES 2012 EDITION UNITED NATIONS New York and Geneva, 2012

More information

PART 4: MARKETING STANDARD FOR LETTUCES, CURLED-LEAVED ENDIVES AND BROAD-LEAVED (BATAVIAN) ENDIVES I. DEFINITION OF PRODUCE This standard applies to

PART 4: MARKETING STANDARD FOR LETTUCES, CURLED-LEAVED ENDIVES AND BROAD-LEAVED (BATAVIAN) ENDIVES I. DEFINITION OF PRODUCE This standard applies to ANNEX I to Commission Implementing Regulation (EC) No 543/2011 of 7 June 2011 laying down detailed rules for the application of Council Regulation (EC) No 1234/2007 in respect of the fruit and vegetables

More information

United States Standards for Grades of Beets

United States Standards for Grades of Beets Marketing and Regulatory Programs Agricultural Marketing Service Specialty Crops Program United States Standards for Grades of Beets Effective September 6, 2016 Specialty Crops Inspection Division This

More information

UN/ECE STANDARD H-2 concerning the marketing and commercial quality control of

UN/ECE STANDARD H-2 concerning the marketing and commercial quality control of STANDARD FOR CUT FOLIAGE (H-2) REVISED 1994 UN/ECE STANDARD H-2 concerning the marketing and commercial quality control of CUT FOLIAGE moving in international trade between and to UN/ECE member countries

More information

TBS/AFDC 19 (5771) P3 TZS 741:2010 ICS: TANZANIA STANDARD. Sesame (Simsim) seeds Specification TANZANIA BUREAU OF STANDARDS

TBS/AFDC 19 (5771) P3 TZS 741:2010 ICS: TANZANIA STANDARD. Sesame (Simsim) seeds Specification TANZANIA BUREAU OF STANDARDS TBS/AFDC 19 (5771) P3 TZS 741:2010 ICS: 67.200.20 TANZANIA STANDARD Sesame (Simsim) seeds Specification TANZANIA BUREAU OF STANDARDS 0 Foreword This Tanzania Standard has been prepared in order to guide

More information

Part 3: Reference test blocks

Part 3: Reference test blocks Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 3452-3 Second edition 2013-11-15 Non-destructive testing Penetrant testing Part 3: Reference test blocks Essais non destructifs Examen par ressuage

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 3008-2 Second edition 2017-05 Fire-resistance tests Part 2: Lift landing door assemblies Essais de résistance au feu Partie 2: Assemblage de porte palière d ascenseur Reference

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 6742-3 First edition 2015-05-15 Cycles Lighting and retroreflective devices Part 3: Installation and use of lighting and retro-reflective devices Cycles Éclairages et dispositifs

More information

POSTHARVEST ISSUES IN HOT PEPPER PRODUCTION. Ayoub Mohammed (BSc. M.Phil.)

POSTHARVEST ISSUES IN HOT PEPPER PRODUCTION. Ayoub Mohammed (BSc. M.Phil.) INTRODUCTION POSTHARVEST ISSUES IN HOT PEPPER PRODUCTION Ayoub Mohammed (BSc. M.Phil.) Hot peppers continue to be an important crop both for both the local market and as the most important non traditional

More information

This document is a preview generated by EVS

This document is a preview generated by EVS IEC 60664-3 Edition 3.0 2016-11 REDLINE VERSION colour inside BASIC SAFETY PUBLICATION Insulation coordination for equipment within low-voltage systems Part 3: Use of coating, potting or moulding for protection

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61479 Edition 1.1 2002-06 Edition 1:2001 consolidated with amendment 1:2002 Live working Flexible conductor covers (line hoses) of insulating material IEC 2002 Copyright - all

More information

AS/NZS :2016

AS/NZS :2016 Australian/New Zealand Standard Luminaires Part 2.2: Particular requirements Recessed luminaires Superseding AS/NZS 60598.2.2:2001 AS/NZS 60598.2.2:2016 (IEC 60598-2-2, Ed. 3.0:2011, MOD) Incorporating

More information

Part 2-55: Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors

Part 2-55: Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors This is a preview - click here to buy the full publication INTERNATIONAL STANDARD ISO 80601-2-55 Second edition 2018-02 Medical electrical equipment Part 2-55: Particular requirements for the basic safety

More information

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT COMMITTEE: EL-002 Safety of Household and Similar Electrical Appliances and Small Power Transformers ATTENTION: Bev Harniss DR 18926 CP DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR

More information

This is a preview - click here to buy the full publication

This is a preview - click here to buy the full publication TECHNICAL REPORT IEC/TR 62635 Edition 1.0 2012-10 colour inside Guidelines for end-of-life information provided by manufacturers and recyclers and for recyclability rate calculation of electrical and electronic

More information

This is a preview - click here to buy the full publication

This is a preview - click here to buy the full publication TECHNICAL REPORT IEC/TR 62267-2 Edition 1.0 2011-03 Railway applications Automated urban guided transport (AUGT) Safety requirements Part 2: Hazard analysis at top system level INTERNATIONAL ELECTROTECHNICAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 16494 First edition 2014-11-01 Heat recovery ventilators and energy recovery ventilators Method of test for performance Ventilateurs-récupérateurs de chaleur et ventilateurs-récupérateurs

More information

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 21: Particular requirements Rigid conduit systems

AS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 21: Particular requirements Rigid conduit systems Australian/New Zealand Standard Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems Superseding AS/NZS 2053.2:2001, AS/NZS 2053.6:2001 and AS/NZS 2053.7:2002 This

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60073 Sixth edition 2002-05 Basic and safety principles for man-machine interface, marking and identification Coding principles for indicators and actuators This English-language

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60245-1 Fourth edition 2003-12 Rubber insulated cables Rated voltages up to and including 450/750 V Part 1: General requirements This English-language version is derived from

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60076-11 First edition 2004-05 Power transformers Part 11: Dry-type transformers This English-language version is derived from the original bilingual publication by leaving out

More information

ISO INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels

ISO INTERNATIONAL STANDARD. Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels INTERNATIONAL STANDARD ISO 3864-2 First edition 2004-10-15 Graphical symbols Safety colours and safety signs Part 2: Design principles for product safety labels Symboles graphiques Couleurs de sécurité

More information

Australian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508

Australian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508 AS 61508.0 2006 IEC/TR 61508-0:2005 AS 61508.0 2006 Australian Standard Functional safety of Part 0: Functional safety and AS 61508 This Australian Standard was prepared by Committee IT-006, Industrial

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60896-11 First edition 2002-12 Stationary lead-acid batteries Part 11: Vented types This English-language version is derived from the original bilingual publication by leaving

More information

ORCHID CUT FLOWER THAI AGRICULTURAL STANDARD TAS

ORCHID CUT FLOWER THAI AGRICULTURAL STANDARD TAS THAI AGRICULTURAL STANDARD TAS 5001-2009 ORCHID CUT FLOWER National Bureau of Agricultural Commodity and Food Standards Ministry of Agriculture and Cooperatives ICS 65.020.20 ISBN 978-974-403-676-6 UNOFFICIAL

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60364-5-54 Second edition 2002-06 BASIC SAFETY PUBLICATION Electrical installations of buildings Part 5-54: Selection and erection of electrical equipment Earthing arrangements,

More information

Testing coated fabrics

Testing coated fabrics BRITISH STANDARD BS 3424-12: 1996 ISO 1419:1995 Incorporating Amendments Nos. 1 and 2 Testing coated fabrics Part 12: Accelerated ageing tests ICS 59.080.40 Committees responsible for this British Standard

More information

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT

DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT COMMITTEE: EL-002 Safety of Household and Similar Electrical Appliances and Small Power Transformers ATTENTION: Bev Harniss DR 18925 CP DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 8030 Third edition 2014-07-15 Rubber and plastics hoses Method of test for flammability Tuyaux en caoutchouc et en plastique Méthode d essai d inflammabilité Reference number

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS 61779.6:2000 (Incorporating Amendment No. 1) AS/NZS 61779.6:2000 Australian/New Zealand Standard Electrical apparatus for the detection and measurement of flammable gases Part 6: Guide for the selection,

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60950-21 First edition 2002-12 Information technology equipment Safety Part 21: Remote power feeding This English-language version is derived from the original bilingual publication

More information

Waste fittings for sanitary appliances

Waste fittings for sanitary appliances BRITISH STANDARD BS EN 274-3:2002 Incorporating Corrigendum No. 1 Waste fittings for sanitary appliances Part 3: Quality control The European Standard EN 274-3:2002 has the status of a British Standard

More information

Postharvest Goals. Postharvest Physiology and Quality of Horticultural Crops

Postharvest Goals. Postharvest Physiology and Quality of Horticultural Crops Postharvest Physiology and Quality of Horticultural Crops Mark Ritenour University of Florida Indian River Research and Education Center What is Postharvest Biology? A Pragmatic (practical) science. Primarily

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60086-3 Second edition 2004-12 Primary batteries Part 3: Watch batteries This English-language version is derived from the original bilingual publication by leaving out all French-language

More information

ISO Clean Version of Revised Working Draft (N 348)

ISO Clean Version of Revised Working Draft (N 348) ISO/TC 145/SC 2/WG 1 N 358 Date: 2006-05-29 Source: ISO/TC 145/SC 2/WG 1 Secretariat Project: ISO 23601 Status: 20.20 (WD study initiated) Requested action: for information Distribution: Members of ISO/TC

More information

Environmental testing Part 3-6: Supporting documentation and guidance Confirmation of the performance of temperature/humidity chambers

Environmental testing Part 3-6: Supporting documentation and guidance Confirmation of the performance of temperature/humidity chambers IEC 60068-3-6 Edition 2.0 2018-01 REDLINE VERSION colour inside Environmental testing Part 3-6: Supporting documentation and guidance Confirmation of the performance of temperature/humidity chambers INTERNATIONAL

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61784-5-14 Edition 1.0 2010-07 colour inside Industrial communication networks Profiles Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 IEC 61784-5-14:2010(E)

More information

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site

AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site Australian/New Zealand Standard (ISO 5149-3:2014, MOD) Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site Superseding in part AS/NZS 1677.2:1998 This joint

More information

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des

More information

Medical electrical equipment

Medical electrical equipment AS IEC 60601.1.12:2017 IEC 60601-1-12:2014 AS IEC 60601.1.12:2017 Medical electrical equipment Part 1.12: General requirements for basic safety and essential performance Collateral Standard: Requirements

More information

Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.

Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No. AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61511-2 First edition 2003-07 Functional safety Safety instrumented systems for the process industry sector Part 2: Guidelines for the application of IEC 61511-1 Reference number

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60903 Second edition 2002-08 Live working Gloves of insulating material This English-language version is derived from the original bilingual publication by leaving out all French-language

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60216-4-1 Fourth edition 2006-01 Electrical insulating materials Thermal endurance properties Part 4-1: Ageing ovens IEC 2006 Copyright - all rights reserved No part of this

More information

Australian/New Zealand Standard

Australian/New Zealand Standard AS/NZS ISO 21987:2011 ISO 21987:2009 AS/NZS ISO 21987:2011 Australian/New Zealand Standard Ophthalmic optics Mounted spectacle AS/NZS ISO 21987:2011 This Joint Australian/New Zealand Standard was prepared

More information

GASTEC QA. Approval Requirements 31-1

GASTEC QA. Approval Requirements 31-1 KE 31-1 March 2012 GASTEC QA Approval Requirements 31-1 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 20653 Second edition 2013-02-15 Road vehicles Degrees of protection (IP code) Protection of electrical equipment against foreign objects, water and access Véhicules routiers

More information

MINISTRY FOR PRIMARY INDUSTRIES IMPORT HEALTH STANDARD FOR CUT FLOWERS AND FOLIAGE

MINISTRY FOR PRIMARY INDUSTRIES IMPORT HEALTH STANDARD FOR CUT FLOWERS AND FOLIAGE MINISTRY FOR PRIMARY INDUSTRIES 155.02.04 IMPORT HEALTH STANDARD FOR CUT FLOWERS AND FOLIAGE Copy No: Issued to: Issued as an import health standard pursuant to section 24 of the Biosecurity Act 1993 TABLE

More information

AS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017

AS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017 AS/NZS 62560:2017 (IEC 62560, Ed. 1.1:2015, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications Superseding AS/NZS IEC 62560:2014

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60068-2-30 Third edition 2005 Environmental testing Part 2-30: Tests Test Db: IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60076-5 Second edition 2000-07 Power transformers Part 5: Ability to withstand short circuit This English-language version is derived from the original bilingual publication

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60115-8 Edition 2.0 2009-01 Fixed resistors for use in electronic equipment Part 8: Sectional specification Fixed surface mount resistors INTERNATIONAL ELECTROTECHNICAL COMMISSION

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 2: Determination of shear strength

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 2: Determination of shear strength Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 9311-2 Second edition 2011-08-15 Adhesives for thermoplastic piping systems Part 2: Determination of shear strength Adhésifs pour réseaux de tuyauteries

More information

AS/NZS :1998 AS/NZS ISO

AS/NZS :1998 AS/NZS ISO (ISO 817:2014, IDT) Australian/New Zealand Standard Refrigerants Designation and safety classification Superseding AS/NZS 1677.1:1998 AS/NZS ISO 817:2016 This joint Australian/New Zealand standard was

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60364-4-41 Fifth edition 2005-12 GROUP SAFETY PUBLICATION Low-voltage electrical installations Part 4-41: Protection for safety This English-language version is derived from

More information

Dentistry Operating lights

Dentistry Operating lights Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 9680 Third edition 2014-10-15 Dentistry Operating lights Médecine bucco-dentaire Appareils d éclairage Reference number ISO 9680:2014(E) ISO 2014

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION IEC TS 62896 Edition 1.0 2015-11 Hybrid insulators for a.c. and d.c. high-voltage applications Definitions, test methods and acceptance criteria INTERNATIONAL ELECTROTECHNICAL COMMISSION

More information

GUIDE IEC GUIDE 117. Electrotechnical equipment Temperatures of touchable hot surfaces. Edition

GUIDE IEC GUIDE 117. Electrotechnical equipment Temperatures of touchable hot surfaces. Edition IEC GUIDE 117 Edition 1.0 2010-10 GUIDE Electrotechnical equipment Temperatures of touchable hot surfaces INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE U ICS 29.020 ISBN 978-2-88912-219-6 Registered

More information

Draft for comments only Not to be cited as East African Standard

Draft for comments only Not to be cited as East African Standard EAST AFRICAN STANDARD Fresh asparagus Specification and grading EAST AFRICAN COMMUNITY HS 0709.20.0000 CD/K/037:2010 ICS 67.080.10 EAC 2010 First Edition 2010 Foreword Development of the East African Standards

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-30910-7 SOUTH AFRICAN NATIONAL STANDARD Electrical security systems Part 2-2: Access control systems Central processor WARNING This document references other documents normatively. Published

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT IEC TR 60825-5 Second edition 2003-06 Safety of laser products Part 5: Manufacturer's checklist for IEC 60825-1 Sécurité des appareils à laser Partie 5: Liste de contrôle du fabricant

More information

Postharvest Physiology & Quality of Horticultural Crops

Postharvest Physiology & Quality of Horticultural Crops Postharvest Physiology & Quality of Horticultural Crops Mark Ritenour Indian River Research and Education Center, Fort Pierce Causes of Postharvest Loss Environmental Factors Temperature Physical damage

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-23465-2 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 2: Fire hose reels and above-ground hydrants Amdt 1 Published by SABS Standards Division 1 Dr

More information

ISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours

ISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours INTERNATIONAL STANDARD ISO 23601 First edition 2009-02-15 Safety identification Escape and evacuation plan signs Identification de sécurité Plans d'évacuation et de secours Reference number ISO 23601:2009(E)

More information

Australian Standard. Electroacoustics Sound calibrators AS IEC This is a free 7 page sample. Access the full version online.

Australian Standard. Electroacoustics Sound calibrators AS IEC This is a free 7 page sample. Access the full version online. AS IEC 60942 2004 IEC 60942:2003 AS IEC 60942 Australian Standard Electroacoustics Sound calibrators This Australian Standard was prepared by Committee AV-002, Acoustics Instrumentation and Measurement

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD IEC 61968-4 First edition 2007-07 Application integration at electric utilities System interfaces for distribution management Part 4: Interfaces for records and asset management

More information

This is a preview - click here to buy the full publication

This is a preview - click here to buy the full publication TECHNICAL REPORT IEC/TR 62730 Edition 1.0 2012-03 HV polymeric insulators for indoor and outdoor use tracking and erosion testing by wheel test and 5 000h test INTERNATIONAL ELECTROTECHNICAL COMMISSION

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60364-6 First edition 2006-02 Low-voltage electrical installations Part 6: Verification This English-language version is derived from the original bilingual publication by leaving

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60068-3-5 Edition 2.0 2018-01 Environmental testing Part 3-5: Supporting documentation and guidance Confirmation of the performance of temperature chambers INTERNATIONAL ELECTROTECHNICAL

More information

AS/NZS 3133:2008 AS/NZS

AS/NZS 3133:2008 AS/NZS Incorporating Amendment No. 1 and 2 Australian/New Zealand Standard Approval and test specification Air-break switches Superseding AS/NZS 3133:2008 This joint Australian/New Zealand standard was prepared

More information

SOUTH AFRICAN NATIONAL STANDARD

SOUTH AFRICAN NATIONAL STANDARD ISBN 978-0-626-27010-0 SOUTH AFRICAN NATIONAL STANDARD Protection against lightning Physical damage to structures and life hazard WARNING Can only be used in conjunction with the SANS 62305 series. Published

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60445 Fourth edition 2006-11 BASIC SAFETY PUBLICATION Basic and safety principles for man-machine interface, marking and identification Identification of equipment terminals

More information

AS/NZS :2015

AS/NZS :2015 AS/NZS 60598.2.10:2015 (IEC 60598.2.10, Ed.2.0:2003, MOD) Australian/New Zealand Standard Luminaires Part 2.10: Particular requirements Portable luminaires for children Superseding AS/NZS 60598.2.10:1998

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62496-3-1 Edition 1.0 2009-08 Optical circuit boards Part 3-1: Performance standards Flexible optical circuit boards using INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61169-42 Edition 1.0 2013-01 colour inside Radio-frequency connectors Part 42: Sectional specification for CQN series quick lock RF coaxial connectors IEC 61169-42:2013(E) THIS

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60092-376 Second edition 2003-05 Electrical installations in ships Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) Installations électriques à bord

More information

This document is a preview generated by EVS

This document is a preview generated by EVS INTERNATIONAL STANDARD ISO 6772 Third edition 2012-10-01 Aerospace Fluid systems Impulse testing of hydraulic hose, tubing and fitting assemblies Aéronautique et espace Systèmes de fluides Essai d impulsion

More information

Sýnishorn ISO INTERNATIONAL STANDARD IULTCS/IUP Leather Determination of abrasion resistance Part 2: Martindale ball plate method

Sýnishorn ISO INTERNATIONAL STANDARD IULTCS/IUP Leather Determination of abrasion resistance Part 2: Martindale ball plate method INTERNATIONAL STANDARD ISO 17076-2 IULTCS/IUP 48-2 First edition 2011-06-15 Leather Determination of abrasion resistance Part 2: Martindale ball plate method Cuir Détermination de la résistance à l'abrasion

More information

BRIEF. Post-harvest losses along value and supply chains in the Pacific Island Countries. This brief contains:

BRIEF. Post-harvest losses along value and supply chains in the Pacific Island Countries. This brief contains: BRIEF 2015 Post-harvest losses along value and supply chains in the Pacific Island Countries Cover photo source: FAO-SAP Photos collection This brief contains: Post-Harvest Losses (PHL) along value and

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61215 Second edition 2005-04 Crystalline silicon terrestrial photovoltaic (PV) modules Design qualification and type approval This English-language version is derived from the

More information

James R. Cranney California Citrus Quality Council

James R. Cranney California Citrus Quality Council James R. Cranney California Citrus Quality Council Exports are the cream of the crop It may take select production from several groves to fill export orders Difficult to designate specific groves for specific

More information

Rubber and plastics hoses Method of test for flammability

Rubber and plastics hoses Method of test for flammability INTERNATIONAL STANDARD ISO 8030 Third edition 2014-07-15 Rubber and plastics hoses Method of test for flammability Tuyaux en caoutchouc et en plastique Méthode d essai d inflammabilité Reference number

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 62317-7 First edition 2005-09 Ferrite cores Dimensions Part 7: EER-cores IEC 2005 Copyright - all rights reserved No part of this publication may be reproduced or utilized in

More information

AS/NZS :2008

AS/NZS :2008 AS/NZS 60079.29.2:2008 Australian/New Zealand Standard Explosive atmospheres Part 29.2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen AS/NZS 60079.29.2:2008

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 60068-2-52 Edition 3.0 2017-11 Environmental testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 19.040

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION ISO/TS 7240-29 First edition 2017-06 Fire detection and alarm systems Part 29: Video fire detectors Systèmes de détection et d alarme d incendie Partie 29: Titre manque Reference

More information

AS AS Australian Standard. Soils for landscaping and garden use. This is a free 7 page sample. Access the full version online.

AS AS Australian Standard. Soils for landscaping and garden use. This is a free 7 page sample. Access the full version online. AS 4419 2003 AS 4419 Australian Standard Soils for landscaping and garden use This Australian Standard was prepared by Committee CS-037, Garden Soils and Potting Mixes. It was approved on behalf of the

More information

AS/NZS :2014

AS/NZS :2014 Australian/New Zealand Standard Safety of machinery AS/NZS 4024.1905:2014 (IEC 61310-2, Ed. 2.0 (2007), IDT) Part 1905: Displays, controls, actuators and signals Indication, marking and actuation Requirements

More information

PUBLICLY AVAILABLE SPECIFICATION

PUBLICLY AVAILABLE SPECIFICATION PUBLICLY AVAILABLE SPECIFICATION PRE-STANDARD IEC/PAS 61169-42 Edition 1.0 2009-04 Radio-frequency connectors Part 42: Sectional specification for CQN series quick lock RF coaxial connectors INTERNATIONAL

More information

ISO 7183 INTERNATIONAL STANDARD. Compressed-air dryers Specifications and testing. Sécheurs à air comprimé Spécifications et essais

ISO 7183 INTERNATIONAL STANDARD. Compressed-air dryers Specifications and testing. Sécheurs à air comprimé Spécifications et essais INTERNATIONAL STANDARD ISO 7183 Second edition 2007-12-15 Compressed-air dryers Specifications and testing Sécheurs à air comprimé Spécifications et essais Reference number ISO 7183:2007(E) ISO 2007 PDF

More information

DRAFT TANZANIA STANDARD

DRAFT TANZANIA STANDARD EEDC 4 (5157) P3 IEC 62599-1: 2010 DRAFT TANZANIA STANDARD (Draft for comments only) Alarm systems Part 1: Environmental test methods TANZANIA BUREAU OF STANDARDS TBS 2017 First Edition 2017 0 National

More information

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD INTERNATIONAL STANDARD IEC 61892-1 First edition 2001-12 Mobile and fixed offshore units Electrical installations Part 1: General requirements and conditions Unités fixes et mobiles en mer Installations

More information

AS/NZS 4821:2014. Protective footwear for firefighters Requirements and test methods AS/NZS 4821:2014. Australian/New Zealand Standard

AS/NZS 4821:2014. Protective footwear for firefighters Requirements and test methods AS/NZS 4821:2014. Australian/New Zealand Standard Australian/New Zealand Standard AS/NZS 4821:2014 (EN 15090:2012, MOD) Protective footwear for firefighters Requirements and test methods Superseding AS/NZS 4821:2006 AS/NZS 4821:2014 This standard, is

More information

AS/NZS :2014. Electrical equipment for coal mines Introduction, inspection and maintenance AS/NZS :2014. Part 1: For hazardous areas

AS/NZS :2014. Electrical equipment for coal mines Introduction, inspection and maintenance AS/NZS :2014. Part 1: For hazardous areas AS/NZS 2290.1:2014 Australian/New Zealand Standard Electrical equipment for coal mines Introduction, inspection and maintenance Part 1: For hazardous areas Superseding AS/NZS 2290.1:2005 AS/NZS 2290.1:2014

More information

TECHNICAL REPORT IEC/TR Fibre optic communication system design guides Part 11: Multimode launch conditions. Edition 1.

TECHNICAL REPORT IEC/TR Fibre optic communication system design guides Part 11: Multimode launch conditions. Edition 1. TECHNICAL REPORT IEC/TR 61282-11 Edition 1.0 2012-05 Fibre optic communication system design guides Part 11: Multimode launch conditions INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE V ICS 33.180.01

More information