SOUTH AFRICAN NATIONAL STANDARD
|
|
|
- Edwina Black
- 6 years ago
- Views:
Transcription
1 ISBN SOUTH AFRICAN NATIONAL STANDARD Protection against lightning Physical damage to structures and life hazard WARNING Can only be used in conjunction with the SANS series. Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 Table of changes Change No. Date Scope 2010 Amended to replace the Certificate of Compliance for lightning protection systems by a Lightning protection system installation safety report, to include a Lightning protection system maintenance certificate, to change two definitions, and to correct the number of a normative reference and a drawing. Amdt Amended to replace the table on lightning ground flash density and to update a referenced standard. Foreword This South African standard was approved by National Committee SABS SC 67F, Electricity distribution systems and components Installations, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document was published in December This document supersedes SANS 10313:2010 (edition 3.1). A vertical line in the margin shows where the text has been technically modified by amendment No. 2. This document is referenced in the National Building Regulations and Building Standards Act, 1977 (Act No. 103 of 1977) and in the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993). Annexes A and B form an integral part of this document. Annex C is for information only.
3 Contents Page Foreword 1 Scope Normative references Definitions Lightning protection system (LPS) External lightning protection system Internal lightning protection system Maintenance and inspection of an LPS Protection measures against injury to living beings due to touch and step voltages Risk management Installation of earth rods and electrodes Mast protection for thatched roofs Structures with explosive or flammable substances... 7 Annex A (normative) Lightning protection system installation safety report... 9 Annex B (normative) Lightning protection system maintenance certificate Annex C (informative) Lightning ground flash density. 13 Bibliography
4 This page is intentionally left blank 2
5 Protection against lightning Physical damage to structures and life hazard 1 Scope 1.1 The scopes of all parts of SANS apply, with the inclusion of a) thatched roof structures, and b) buildings with explosive or flammable substances. 1.2 This standard makes provision for the issuing of a Lightning protection system installation safety report by an LPS designer or an LPS installer, and a Lightning protection system maintenance certificate. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. Information on currently valid national and international standards can be obtained from the SABS Standards Division. SANS 1063, Earth rods, couplers and connections. SANS , The wiring of premises Part 1: Low-voltage installations. SANS 10199, The design and installation of earth electrodes. SANS 10225, The design and construction of lighting masts. SANS /IEC , Protection against lightning Part 2: Risk management. SANS /IEC , Protection against lightning Part 3: Physical damage to structures and life hazard. SANS /IEC , Protection against lightning Part 4: Electrical and electronic systems within structures. 3
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30262-7 SOUTH AFRICAN NATIONAL STANDARD The installation, inspection and maintenance of equipment used in explosive atmospheres Part 1: Installations including surface installations on mines
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28120-5 SOUTH AFRICAN NATIONAL STANDARD Low-foam laundry detergent (for use in automatic and non-automatic domestic washing machines) Published by SABS Standards Division 1 Dr Lategan Road
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22437-0 Any reference to SABS 0114-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Interior lighting Part 2:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30385-3 SOUTH AFRICAN NATIONAL STANDARD The installation, maintenance, repair and replacement of domestic solar water heating systems WARNING This document references other documents normatively.
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30910-7 SOUTH AFRICAN NATIONAL STANDARD Electrical security systems Part 2-2: Access control systems Central processor WARNING This document references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23127-9 SOUTH AFRICAN NATIONAL STANDARD Portable refillable fire extinguishers Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31263-3 SOUTH AFRICAN NATIONAL STANDARD Disposable portable condensed aerosol fire extinguishers WARNING This document references other documents normatively. Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34241-8 SOUTH AFRICAN NATIONAL STANDARD Industrial body belts Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29493-9 Any reference to SABS 0222-5-1-3 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Electrical security
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32798-9 SOUTH AFRICAN NATIONAL STANDARD Gas measuring equipment primarily for use in mines Part 5: Fire detectors WARNING This standard references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22857-6 SOUTH AFRICAN NATIONAL STANDARD Eye-protectors for industrial and non-industrial use Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31129-2 SOUTH AFRICAN NATIONAL STANDARD Symbolic safety signs Part 1: Standard signs and general requirements WARNING This document references other documents normatively. Published by SABS
SANS :2012 Edition 1.8
ISBN 978-0-626-26767-4 SOUTH AFRICAN NATIONAL STANDARD The wiring of premises Part 1: Low-voltage installations Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26992-0 SOUTH AFRICAN NATIONAL STANDARD Fire detection and alarm systems for buildings System design, installation and servicing Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33970-8 SOUTH AFRICAN NATIONAL STANDARD Electric flexible cables with solid extruded dielectric insulation Part 4: Rubber-insulated cables for domestic, office and similar environments (cords)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-2-31560-3 SOUTH AFRICAN NATIONAL STANDARD Electric cables for motor vehicles Ignition cables for motor vehicles Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
SOUTH AFRICAN NATIONAL STANDARD
ICS 13.220.01 ISBN 0-626-14666-6 SOUTH AFRICAN NATIONAL STANDARD Community protection against fire Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26239-6 SOUTH AFRICAN NATIONAL STANDARD Design, selection and installation of geomembranes Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28409-1 Edition 2.1 IEC 60730-2-9:2011 Edition 3.1 SOUTH AFRICAN NATIONAL STANDARD Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30971-8 SOUTH AFRICAN NATIONAL STANDARD Information technology equipment Safety Part 1: General requirements This national standard is the identical implementation of, and is adopted with
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23465-2 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 2: Fire hose reels and above-ground hydrants Amdt 1 Published by SABS Standards Division 1 Dr
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36792-3 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Methods of test for assessment of the fire integrity of electric cables Part 2: Test for unprotected small cables for use in emergency circuits
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28655-2 Edition 1 and nat. amdt 1 ISO 7866:1999 Edition 1 Any reference to SABS ISO 7866 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32266-3 Edition 3.2 IEC 60335-2-29:2010 Edition 4.2 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27031-5 Edition 4.2 IEC 60238:2011 Edition 8.2 SOUTH AFRICAN NATIONAL STANDARD Edison screw lampholders This national standard is the identical implementation of IEC 60238:2011 and is adopted
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28897-6 IEC 61869-1:2007 SOUTH AFRICAN NATIONAL STANDARD Instrument transformers Part 1: General requirements This national standard is the identical implementation of IEC 61869-1:2007 and
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31262-6 SOUTH AFRICAN NATIONAL STANDARD Olive oils and olive-pomace oils Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33724-7 IEC 60364-7-712:2002 SOUTH AFRICAN NATIONAL STANDARD Electrical installations of buildings Part 7-712: Requirements for special installations or locations Solar photovoltaic (PV)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25781-1 IEC 61010-1:2010 SOUTH AFRICAN NATIONAL STANDARD Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements This national
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34222-7 IEC 61558-2-9:2010 SOUTH AFRICAN NATIONAL STANDARD Safety of transformers, reactors, power supply units and combinations thereof Part 2-9: Particular requirements and tests for transformers
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29193-8 Edition 1.2 IEC 60432-1:2012 Edition 2.2 SOUTH AFRICAN NATIONAL STANDARD Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21598-9 ISO 14520-1:2006 SOUTH AFRICAN NATIONAL STANDARD Gaseous fire-extinguishing systems Physical properties and system design Part 1: General requirements This national standard is the
SOUTH AFRICAN NATIONAL STANDARD. Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
ISBN 978-0-626-33793-3 Edition 1.1 IEC 60601-2-19:2016 Edition 2.1 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-19: Particular requirements for the basic safety essential performance
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22587-2 RSR 001:2009 SOUTH AFRICAN NATIONAL STANDARD Railway safety management Part 1: General Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29479-3 IEC 60601-2-66:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25898-6 IEC 61400-25-6:2010 SOUTH AFRICAN NATIONAL STANDARD Wind turbines Part 25-6: Communications for monitoring and control of wind power plants Logical node classes and data classes
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21896-6 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum This national standard is a modified adoption
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28875-4 Edition 1.2 IEC 60227-5:2003 SOUTH AFRICAN NATIONAL STANDARD Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) This
SANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29823-4 IEC 60601-2-65:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28010-9 Edition 1 and nat. amdt 1 ISO 3743-2:1994 Edition 1 Any reference to SABS ISO 3743-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002)
SOUTH AFRICAN NATIONAL STANDARD
Copying and network storage prohibited. ISBN 978-0-626-32227-4 SANS 60947-5-6:1999 Edition 1 and nat. amdt 1 IEC 60947-5-6:1999 Edition 1 Any reference to SABS IEC 60947-5-6 is deemed to be a reference
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34367-5 Edition 1 (incorporating EN amdt 1, EN corr. 1) EN 1492-1:2000 Edition 1 (incorporating amdt 1, corr. 1) SOUTH AFRICAN NATIONAL STANDARD Textile slings Safety Part 1: Flat woven
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23464-5 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 1: Portable and wheeled (mobile) fire extinguishers Published by SABS Standards Division 1 Dr
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30618-2 ISO 80601-2-61:2011 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices
SANS 21-1:2009 Edition 1 EN 115-1:2008
ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28516-6 IEC 62053-11:2003 SOUTH AFRICAN NATIONAL STANDARD Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5,
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62561-1 Edition 1.0 2012-02 Lightning protection system components (LPSC) Part 1: Requirements for connection components INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE
Licensed exclusively to SABS. Copying and network storage prohibited.
ICS 29.240.20 ISBN 0-626-10879-9 SABS 0198-14* *This standard references other standards Edition 2 1996 SOUTH AFRICAN STANDARD Code of practice The selection, handling and installation of electric power
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61280-1-1 Edition 2.0 2013-05 Fibre optic communication subsystem basic test procedures Part 1-1: Test procedures for general communication subsystems Transmitter output optical
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-10 Edition 2.0 2010-07 colour inside Industrial communication networks Profiles Part 5-10: Installation of fieldbuses Installation profiles for CPF 10 INTERNATIONAL ELECTROTECHNICAL
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61300-2-33 Edition 3.0 2012-07 Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-33: Tests Assembly and disassembly of fibre
AS/NZS :2014
Australian/New Zealand Standard Safety of machinery AS/NZS 4024.1905:2014 (IEC 61310-2, Ed. 2.0 (2007), IDT) Part 1905: Displays, controls, actuators and signals Indication, marking and actuation Requirements
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-5-54 Second edition 2002-06 BASIC SAFETY PUBLICATION Electrical installations of buildings Part 5-54: Selection and erection of electrical equipment Earthing arrangements,
AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016. Part 3: Installation site
Australian/New Zealand Standard (ISO 5149-3:2014, MOD) Refrigerating systems and heat pumps Safety and environmental requirements Part 3: Installation site Superseding in part AS/NZS 1677.2:1998 This joint
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 60079-46 Edition 1.0 2017-08 Explosive atmospheres Part 46: Equipment assemblies INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.260.20 ISBN 978-2-8322-4763-1 Warning! Make
This is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62785 Edition 1.0 2013-02 Guidance on the environmentally conscious design of fibre optics related products and subsystems INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE L
ISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours
INTERNATIONAL STANDARD ISO 23601 First edition 2009-02-15 Safety identification Escape and evacuation plan signs Identification de sécurité Plans d'évacuation et de secours Reference number ISO 23601:2009(E)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30561-1 Edition 2 and EN tech. corr. 1 EN 1423:2012 Edition 2 and tech. corr. 1 SOUTH AFRICAN NATIONAL STANDARD Road marking materials Drop on materials Glass beads, antiskid aggregates
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60794-1-2 Edition 3.0 2013-09 colour inside Optical fibre cables Part 1-2: Generic specification Cross reference table for optical cable test procedures INTERNATIONAL ELECTROTECHNICAL
INTERNATIONAL STANDARD
IEC 61892-7 INTERNATIONAL STANDARD Edition 2.0 2007-11 Mobile and fixed offshore units Electrical installations Part 7: Hazardous areas INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XA ICS 47.020.60
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 20653 Second edition 2013-02-15 Road vehicles Degrees of protection (IP code) Protection of electrical equipment against foreign objects, water and access Véhicules routiers
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62495 Edition 1.0 2011-04 Nuclear instrumentation Portable X-ray fluorescence analysis equipment utilizing a miniature X-ray tube INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62087-6 Edition 1.0 2015-06 colour inside Audio, video and related equipment Determination of power consumption Part 6: Audio equipment INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62496-3-1 Edition 1.0 2009-08 Optical circuit boards Part 3-1: Performance standards Flexible optical circuit boards using INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE
Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.
AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,
AS/NZS :2016
Australian/New Zealand Standard Luminaires Part 2.2: Particular requirements Recessed luminaires Superseding AS/NZS 60598.2.2:2001 AS/NZS 60598.2.2:2016 (IEC 60598-2-2, Ed. 3.0:2011, MOD) Incorporating
Australian Standard. Functional safety of electrical/electronic/programmable electronic safety-related systems. Part 0: Functional safety and AS 61508
AS 61508.0 2006 IEC/TR 61508-0:2005 AS 61508.0 2006 Australian Standard Functional safety of Part 0: Functional safety and AS 61508 This Australian Standard was prepared by Committee IT-006, Industrial
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60950-21 First edition 2002-12 Information technology equipment Safety Part 21: Remote power feeding This English-language version is derived from the original bilingual publication
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62885-1 Edition 1.0 2016-08 Surface cleaning appliances Part 1: General requirements on test material and test equipment INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.080
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60115-8 Edition 2.0 2009-01 Fixed resistors for use in electronic equipment Part 8: Sectional specification Fixed surface mount resistors INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60462 Edition 2.0 2010-07 Nuclear instrumentation Photomultiplier tubes for scintillation counting Test procedures INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE T ICS
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-4-44 Edition 1.1 2003-12 Edition 1:2001 consolidated with amendment 1:2003 Electrical installations of buildings Part 4-44: Protection for safety Protection against voltage
TECHNICAL REPORT IEC/TR Fibre optic communication system design guides Part 11: Multimode launch conditions. Edition 1.
TECHNICAL REPORT IEC/TR 61282-11 Edition 1.0 2012-05 Fibre optic communication system design guides Part 11: Multimode launch conditions INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE V ICS 33.180.01
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-1 First edition 2001-12 Mobile and fixed offshore units Electrical installations Part 1: General requirements and conditions Unités fixes et mobiles en mer Installations
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62137-1-2 First edition 2007-07 Surface mounting technology Environmental and endurance test methods for surface mount solder joint Part 1-2: Shear strength test Commission Electrotechnique
GUIDE IEC GUIDE 117. Electrotechnical equipment Temperatures of touchable hot surfaces. Edition
IEC GUIDE 117 Edition 1.0 2010-10 GUIDE Electrotechnical equipment Temperatures of touchable hot surfaces INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE U ICS 29.020 ISBN 978-2-88912-219-6 Registered
AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016
Australian/New Zealand Standard AS/NZS 5149.1:2016 (ISO 5149-1:2014, MOD) Incorporating Amendment No. 1 Refrigerating systems and heat pumps Safety and environmental requirements Part 1: Definitions, classification
INTERNATIONAL STANDARD
IEC 60068-2-20 INTERNATIONAL STANDARD Edition 5.0 2008-07 Environmental testing Part 2-20: Tests Test T: Test methods for solderability and resistance to soldering heat of devices with leads INTERNATIONAL
Luminaires Part 2-4: Particular requirements Portable general purpose luminaires
IEC 60598-2-4 Edition 3.0 2017-04 REDLINE VERSION colour inside Luminaires Part 2-4: Particular requirements Portable general purpose luminaires INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.140.40
ISO INTERNATIONAL STANDARD. Oscillation-type density meters Part 1: Laboratory instruments
INTERNATIONAL STANDARD ISO 15212-1 First edition 1998-10-01 Oscillation-type density meters Part 1: Laboratory instruments Densimètres à oscillations Partie 1: Instruments de laboratoire A Reference number
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-14 Edition 1.0 2010-07 colour inside Industrial communication networks Profiles Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 IEC 61784-5-14:2010(E)
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61753-1-3 Edition 1.0 2014-05 Fibre optic interconnecting devices and passive components Performance standard Part 1-3: General and guidance for single-mode fibre optic connector
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61479 Edition 1.1 2002-06 Edition 1:2001 consolidated with amendment 1:2002 Live working Flexible conductor covers (line hoses) of insulating material IEC 2002 Copyright - all
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-3-5 Edition 2.0 2018-01 Environmental testing Part 3-5: Supporting documentation and guidance Confirmation of the performance of temperature chambers INTERNATIONAL ELECTROTECHNICAL
AS/NZS :2014
(ISO 13857:2008, IDT) Australian/New Zealand Standard Safety of machinery Part 1801: Safety distances to prevent danger zones being reached by upper and lower limbs AS/NZS 4024.1801:2014 This joint Australian/New
TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62896 Edition 1.0 2015-11 Hybrid insulators for a.c. and d.c. high-voltage applications Definitions, test methods and acceptance criteria INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60317-32 Edition 2.0 2015-10 Specifications for particular types of winding wires Part 32: Glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60364-6 First edition 2006-02 Low-voltage electrical installations Part 6: Verification This English-language version is derived from the original bilingual publication by leaving
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61340-4-7 Edition 1.0 2010-01 Electrostatics Part 4-7: Standard test methods for specific applications Ionization INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE U ICS 17.200.99;
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 871 Third edition 2006-11-15 Plastics Determination of ignition temperature using a hot-air furnace Plastiques Détermination de la température d'allumage au moyen d'un four à
INTERNATIONAL STANDARD
IEC 60738-1-4 INTERNATIONAL STANDARD Edition 2.0 2008-02 QC 440004 Thermistors Directly heated positive step-function temperature coefficient Part 1-4: Blank detail specification Sensing application Assessment
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-2-82 Edition 1.0 2007-05 Environmental testing Part 2-82: Tests Test XW 1 : Whisker test methods for electronic and electric components INTERNATIONAL ELECTROTECHNICAL COMMISSION