SOUTH AFRICAN NATIONAL STANDARD
|
|
|
- Earl Haynes
- 5 years ago
- Views:
Transcription
1 ISBN SOUTH AFRICAN NATIONAL STANDARD Portable refillable fire extinguishers Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: Fax: SABS
2 Table of changes Change No. Date Scope Amdt Amended to update referenced standards, to change the requirements for the components of a fire extinguisher, to correct the procedure for the ageing test, to correct a footnote in table D.2, and to include a title for the figure in annex E. Amdt Amended to move reference to legislation to the forward, to update the title of the annex on indication of test fire rating, and to add tables for minimum fire ratings. Foreword This South African standard was approved by National Committee SABS SC 21A, Fire safety Fire-fighting equipment, in accordance with procedures of the SABS Standards Division, in compliance with annex 3 of the WTO/TBT agreement. This document supersedes SANS 1910:2006 (edition 1.1). This document was published in August A vertical line in the margin shows where the text has been technically modified by amendment No. 2. Reference is made in clause 1 to the "relevant national legislation". In South Africa this means the Occupational Health and Safety Act, 1993 (Act No. 85 of 1993). Amdt 2 Annexes A, B, C and D form an integral part of this standard. Annexes E and F are for information only.
3 Contents Page Foreword 1 Scope Normative references Definitions General requirements Design and construction Performance requirements Packing and marking Inspection and methods of test Inspection Leakage test Design pressure test for complete fire extinguisher Test for corrosion resistance of the assembled fire extinguisher Test for the design, construction and quality of plastic components Test for resistance of plastic components to burst pressure Impact test on operating heads Test for resistance of hose to kinking Hydrostatic pressure test on hose assemblies Pressure relief valve test Intermittent discharge test Fire extinguisher performance test Test for electrical conductivity Annex A (normative) Notes to purchasers Annex B (normative) Indication of test fire rating and minimum fire ratings Amdt 2 Annex C (normative) Fire classification symbols Annex D (normative) Class test fires Annex E (informative) Recommended type of large and small wall brackets for mounting of fire extinguishers Annex F (informative) Quality verification of portable refillable fire extinguishers Bibliography
4 This page is intentionally left blank 2
5 Portable refillable fire extinguishers 1 Scope 1.1 This standard covers the principal requirements for the safety, reliability and performance of portable, stored pressure, refillable type fire extinguishers suitable for use on fires of classes A, B and C. 1.2 This standard covers the requirements for water type, foam type and dry chemical powder type fire extinguishers. 1.3 It does not cover the requirements for CO 2 fire extinguishers. For the requirements of this fire extinguisher, refer to SANS It does not cover Halon type extinguishers. (South Africa has agreed to abide by the Montreal Agreement on the use of CFC products. However, maintenance on this type of extinguisher is still carried out in terms of SANS ) Amdt It does not cover the cartridge operated extinguisher. NOTE 1 External cartridge operated extinguishers should be approved by the approving authority. NOTE 2 In terms of the National Building Regulations (see SANS 10400), every type of portable fire extinguisher distributed in South Africa has to comply with the requirements of a local standard. (See the relevant national legislation (see foreword)). Details of the regular control, inspection and maintenance of fire extinguishers are given in SANS and SANS Amdt 1; amdt 2 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this standard. All standards are subject to revision and, since any reference to a standard is deemed to be a reference to the latest edition of that standard, parties to agreements based on this standard are encouraged to take steps to ensure the use of the most recent editions of the standards indicated below. Information on currently valid national and international standards can be obtained from the SABS Standards Division. ISO 4582, Plastics Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources. SANS 988, Braided reinforced rubber hose for air and water. SANS 1086, Flexible polyvinyl chloride (PVC) pressure hose. 3
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31129-2 SOUTH AFRICAN NATIONAL STANDARD Symbolic safety signs Part 1: Standard signs and general requirements WARNING This document references other documents normatively. Published by SABS
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22437-0 Any reference to SABS 0114-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Interior lighting Part 2:
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31263-3 SOUTH AFRICAN NATIONAL STANDARD Disposable portable condensed aerosol fire extinguishers WARNING This document references other documents normatively. Published by SABS Standards
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27010-0 SOUTH AFRICAN NATIONAL STANDARD Protection against lightning Physical damage to structures and life hazard WARNING Can only be used in conjunction with the SANS 62305 series. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28120-5 SOUTH AFRICAN NATIONAL STANDARD Low-foam laundry detergent (for use in automatic and non-automatic domestic washing machines) Published by SABS Standards Division 1 Dr Lategan Road
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30262-7 SOUTH AFRICAN NATIONAL STANDARD The installation, inspection and maintenance of equipment used in explosive atmospheres Part 1: Installations including surface installations on mines
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34241-8 SOUTH AFRICAN NATIONAL STANDARD Industrial body belts Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428 7911 Fax: +27
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29493-9 Any reference to SABS 0222-5-1-3 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH AFRICAN NATIONAL STANDARD Electrical security
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23465-2 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 2: Fire hose reels and above-ground hydrants Amdt 1 Published by SABS Standards Division 1 Dr
SOUTH AFRICAN NATIONAL STANDARD
ICS 13.220.01 ISBN 0-626-14666-6 SOUTH AFRICAN NATIONAL STANDARD Community protection against fire Published by Standards South Africa 1 dr lategan road groenkloof private bag x191 pretoria 0001 tel: 012
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30385-3 SOUTH AFRICAN NATIONAL STANDARD The installation, maintenance, repair and replacement of domestic solar water heating systems WARNING This document references other documents normatively.
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33970-8 SOUTH AFRICAN NATIONAL STANDARD Electric flexible cables with solid extruded dielectric insulation Part 4: Rubber-insulated cables for domestic, office and similar environments (cords)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30910-7 SOUTH AFRICAN NATIONAL STANDARD Electrical security systems Part 2-2: Access control systems Central processor WARNING This document references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26239-6 SOUTH AFRICAN NATIONAL STANDARD Design, selection and installation of geomembranes Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-26992-0 SOUTH AFRICAN NATIONAL STANDARD Fire detection and alarm systems for buildings System design, installation and servicing Published by SABS Standards Division 1 Dr Lategan Road Groenkloof
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-2-31560-3 SOUTH AFRICAN NATIONAL STANDARD Electric cables for motor vehicles Ignition cables for motor vehicles Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private
SANS :2012 Edition 1.8
ISBN 978-0-626-26767-4 SOUTH AFRICAN NATIONAL STANDARD The wiring of premises Part 1: Low-voltage installations Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22857-6 SOUTH AFRICAN NATIONAL STANDARD Eye-protectors for industrial and non-industrial use Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-36792-3 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Methods of test for assessment of the fire integrity of electric cables Part 2: Test for unprotected small cables for use in emergency circuits
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32798-9 SOUTH AFRICAN NATIONAL STANDARD Gas measuring equipment primarily for use in mines Part 5: Fire detectors WARNING This standard references other documents normatively. Published
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28655-2 Edition 1 and nat. amdt 1 ISO 7866:1999 Edition 1 Any reference to SABS ISO 7866 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002) SOUTH
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30971-8 SOUTH AFRICAN NATIONAL STANDARD Information technology equipment Safety Part 1: General requirements This national standard is the identical implementation of, and is adopted with
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23464-5 SOUTH AFRICAN NATIONAL STANDARD The use and control of fire-fighting equipment Part 1: Portable and wheeled (mobile) fire extinguishers Published by SABS Standards Division 1 Dr
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-31262-6 SOUTH AFRICAN NATIONAL STANDARD Olive oils and olive-pomace oils Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria 0001 Tel: +27 12 428
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28409-1 Edition 2.1 IEC 60730-2-9:2011 Edition 3.1 SOUTH AFRICAN NATIONAL STANDARD Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21598-9 ISO 14520-1:2006 SOUTH AFRICAN NATIONAL STANDARD Gaseous fire-extinguishing systems Physical properties and system design Part 1: General requirements This national standard is the
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28897-6 IEC 61869-1:2007 SOUTH AFRICAN NATIONAL STANDARD Instrument transformers Part 1: General requirements This national standard is the identical implementation of IEC 61869-1:2007 and
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25781-1 IEC 61010-1:2010 SOUTH AFRICAN NATIONAL STANDARD Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements This national
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27031-5 Edition 4.2 IEC 60238:2011 Edition 8.2 SOUTH AFRICAN NATIONAL STANDARD Edison screw lampholders This national standard is the identical implementation of IEC 60238:2011 and is adopted
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-21896-6 Edition 1 SOUTH AFRICAN NATIONAL STANDARD Medical gas pipeline systems Part 1: Pipeline systems for compressed medical gases and vacuum This national standard is a modified adoption
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32266-3 Edition 3.2 IEC 60335-2-29:2010 Edition 4.2 SOUTH AFRICAN NATIONAL STANDARD Household and similar electrical appliances Safety Part 2-29: Particular requirements for battery chargers
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28010-9 Edition 1 and nat. amdt 1 ISO 3743-2:1994 Edition 1 Any reference to SABS ISO 3743-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-22587-2 RSR 001:2009 SOUTH AFRICAN NATIONAL STANDARD Railway safety management Part 1: General Published by SABS Standards Division 1 Dr Lategan Road Groenkloof Private Bag X191 Pretoria
SOUTH AFRICAN NATIONAL STANDARD
Copying and network storage prohibited. ISBN 978-0-626-32227-4 SANS 60947-5-6:1999 Edition 1 and nat. amdt 1 IEC 60947-5-6:1999 Edition 1 Any reference to SABS IEC 60947-5-6 is deemed to be a reference
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34222-7 IEC 61558-2-9:2010 SOUTH AFRICAN NATIONAL STANDARD Safety of transformers, reactors, power supply units and combinations thereof Part 2-9: Particular requirements and tests for transformers
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33724-7 IEC 60364-7-712:2002 SOUTH AFRICAN NATIONAL STANDARD Electrical installations of buildings Part 7-712: Requirements for special installations or locations Solar photovoltaic (PV)
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29193-8 Edition 1.2 IEC 60432-1:2012 Edition 2.2 SOUTH AFRICAN NATIONAL STANDARD Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28875-4 Edition 1.2 IEC 60227-5:2003 SOUTH AFRICAN NATIONAL STANDARD Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) This
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-23963-3 SANS 50353-1:2003 EN 353-1:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Guided type fall arresters including a rigid anchor line
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
SOUTH AFRICAN NATIONAL STANDARD. Part 2-19: Particular requirements for the basic safety and essential performance of infant incubators
ISBN 978-0-626-33793-3 Edition 1.1 IEC 60601-2-19:2016 Edition 2.1 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-19: Particular requirements for the basic safety essential performance
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-34367-5 Edition 1 (incorporating EN amdt 1, EN corr. 1) EN 1492-1:2000 Edition 1 (incorporating amdt 1, corr. 1) SOUTH AFRICAN NATIONAL STANDARD Textile slings Safety Part 1: Flat woven
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32289-2 Edition 1 EN 1176-7:2008 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 7: Guidance on installation, inspection, maintenance and operation This
SANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29479-3 IEC 60601-2-66:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-66: Particular requirements for the basic safety and essential performance of hearing instruments
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-25898-6 IEC 61400-25-6:2010 SOUTH AFRICAN NATIONAL STANDARD Wind turbines Part 25-6: Communications for monitoring and control of wind power plants Logical node classes and data classes
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30618-2 ISO 80601-2-61:2011 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment
SANS :2014 Edition 1 IEC :2012 Edition 1
ISBN 978-0-626-29823-4 IEC 60601-2-65:2012 SOUTH AFRICAN NATIONAL STANDARD Medical electrical equipment Part 2-65: Particular requirements for the basic safety and essential performance of dental intra-oral
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29889-0 Edition 1 EN 572-6:2012 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Glass in building Basic soda lime silicate glass products Part 6: Wired patterned glass This national standard is
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28516-6 IEC 62053-11:2003 SOUTH AFRICAN NATIONAL STANDARD Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5,
Licensed exclusively to SABS. Copying and network storage prohibited.
ICS 29.240.20 ISBN 0-626-10879-9 SABS 0198-14* *This standard references other standards Edition 2 1996 SOUTH AFRICAN STANDARD Code of practice The selection, handling and installation of electric power
SANS 21-1:2009 Edition 1 EN 115-1:2008
ISBN 978-0-626-22589-6 EN 115-1:2008 SOUTH AFRICAN NATIONAL STANDARD Safety of escalators and moving walks Part 1: Construction and installation This national standard is the identical implementation of
ISO/TS TECHNICAL SPECIFICATION. Fire protection Portable and wheeled fire extinguishers Part 2: Inspection and maintenance
TECHNICAL SPECIFICATION ISO/TS 11602-2 First edition 2010-08-15 Fire protection Portable and wheeled fire extinguishers Part 2: Inspection and maintenance Protection contre l'incendie Extincteurs portatifs
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32335-6 Edition 1 (incorporating EN amdt 1) EN 13795:2011 Edition 2 (incorporating amdt 1) SOUTH AFRICAN NATIONAL STANDARD Surgical drapes, gowns and clean air suits, used as medical devices
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-33591-5 EN 12353:2013 SOUTH AFRICAN NATIONAL STANDARD Chemical disinfectants and antiseptics Preservation of test organisms used for the determination of bactericidal (including Legionella),
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-32290-8 EN 1176-10:2008 SOUTH AFRICAN NATIONAL STANDARD Playground equipment and surfacing Part 10: Additional specific safety requirements and test methods for fully enclosed play equipment
Fire fighting Portable fire extinguishers Performance and construction
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 7165 Third edition 2017-07 Fire fighting Portable fire extinguishers Performance and construction Lutte contre l incendie Extincteurs portatifs
Australian/New Zealand Standard
AS/NZS 1841.1:2007 AS/NZS 1841.1:2007 Australian/New Zealand Standard Portable fire extinguishers Part 1: General requirements AS/NZS 1841.1:2007 This Joint Australian/New Zealand Standard was prepared
ISO INTERNATIONAL STANDARD. Oscillation-type density meters Part 1: Laboratory instruments
INTERNATIONAL STANDARD ISO 15212-1 First edition 1998-10-01 Oscillation-type density meters Part 1: Laboratory instruments Densimètres à oscillations Partie 1: Instruments de laboratoire A Reference number
South African Maritime Safety Authority
South African Maritime Safety Authority Ref: SM6/5/2/1 Date: 20 July 2016 Marine tice. 29 of 2016 South African Maritime Code of Practice for Marine Fire Service Stations the SAMFAS Code TO MARINE FIRE
ISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies
INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60227-1 Edition 2.2 1998-03 Edition 2:1993 consolidated with amendments 1:1995 and 2:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60227-3 Edition 2.1 1997-11 Edition 2:1993 consolidated with amendment 1:1997 Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 3: Non-sheathed
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27398-9 Edition 1 EN 14509:2013 Edition 2 SOUTH AFRICAN NATIONAL STANDARD Self-supporting double skin metal faced insulating panels Factory made products Specifications This national standard
Luminaires Part 2-4: Particular requirements Portable general purpose luminaires
IEC 60598-2-4 Edition 3.0 2017-04 REDLINE VERSION colour inside Luminaires Part 2-4: Particular requirements Portable general purpose luminaires INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.140.40
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15538 First edition 2001-10-01 Protective clothing for firefighters Laboratory test methods and performance requirements for protective clothing with a reflective outer surface
DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR COMMENT
COMMITTEE: EL-002 Safety of Household and Similar Electrical Appliances and Small Power Transformers ATTENTION: Bev Harniss DR 18925 CP DRAFT COMBINED POSTAL BALLOT/ AUSTRALIAN / NEW ZEALAND STANDARD FOR
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60754-3 Edition 1.0 2018-03 Test on gases evolved during combustion of materials from cables Part 3: Measurement of low level of halogen content by ion chromatography INTERNATIONAL
ISO INTERNATIONAL STANDARD. Protective gloves for firefighters Laboratory test methods and performance requirements
INTERNATIONAL STANDARD ISO 15383 First edition 2001-09-01 Corrected version 2003-04-15 Protective gloves for firefighters Laboratory test methods and performance requirements Gants de protection pour sapeurs-pompiers
ISO INTERNATIONAL STANDARD. Safety identification Escape and evacuation plan signs. Identification de sécurité Plans d'évacuation et de secours
INTERNATIONAL STANDARD ISO 23601 First edition 2009-02-15 Safety identification Escape and evacuation plan signs Identification de sécurité Plans d'évacuation et de secours Reference number ISO 23601:2009(E)
AS/NZS IEC :2015
AS/NZS IEC 60947.5.6:2015 (IEC 60947-5-6, Ed. 1.0:1999, IDT) Australian/New Zealand Standard Low-voltage switchgear and Part 5.6: Control circuit devices and switching elements DC interface for proximity
ISO/TS TECHNICAL SPECIFICATION
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 22391-7 First edition 2011-11-15 Plastics piping systems for hot and cold water installations Polyethylene of raised temperature resistance
IS INTERNATIONAL STANDARD. Ergonomics - Visual danger signals - General requirements, design and testing
INTERNATIONAL STANDARD IS0 1148 First edition 199-1-15 Ergonomics - Visual danger signals - General requirements, design and testing Ergonomie - Signaux visuels de danger - Exlgences g&w-ales, conception
AS/NZS :2016
Australian/New Zealand Standard Luminaires Part 2.2: Particular requirements Recessed luminaires Superseding AS/NZS 60598.2.2:2001 AS/NZS 60598.2.2:2016 (IEC 60598-2-2, Ed. 3.0:2011, MOD) Incorporating
ISO INTERNATIONAL STANDARD. Fire-resistance tests Elements of building construction Part 1: General requirements
INTERNATIONAL STANDARD ISO 834-1 First edition 1999-09-15 Fire-resistance tests Elements of building construction Part 1: General requirements Essai de résistance au feu Éléments de construction Partie
Fire detection and alarm systems. Part 4: Power supply equipment (ISO :2003, MOD) AS (Incorporating Amendment No.
AS 7240.4 2004 (Incorporating Amendment No. 1) AS 7240.4 2004 Fire detection and alarm systems Part 4: Power supply equipment (ISO 7240-4:2003, MOD) This Australian Standard was prepared by Committee FP-002,
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60730-2-13 Edition 3.0 2017-10 Automatic electrical controls INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 97.120 ISBN 978-2-8322-4900-0 Warning! Make sure that you obtained
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-10 Edition 2.0 2010-07 colour inside Industrial communication networks Profiles Part 5-10: Installation of fieldbuses Installation profiles for CPF 10 INTERNATIONAL ELECTROTECHNICAL
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60245-2 Edition 2.2 1998-04 Edition 2:1994 consolidated with amendments 1:1997 and 2:1997 Rubber insulated cables Rated voltages up to and including 450/750 V Part 2: Test methods
ISO 3733 INTERNATIONAL STANDARD. Petroleum products and bituminous materials Determination of water Distillation method
INTERNATIONAL STANDARD ISO 3733 Second edition 1999-09-15 Petroleum products and bituminous materials Determination of water Distillation method Produits pétroliers et produits bitumineux Dosage de l'eau
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 3008-2 Second edition 2017-05 Fire-resistance tests Part 2: Lift landing door assemblies Essais de résistance au feu Partie 2: Assemblage de porte palière d ascenseur Reference
This is a preview - click here to buy the full publication ICS ISBN
IEC 62341-5-2 Edition 2.0 2019-03 REDLINE VERSION colour inside Organic light emitting diode (OLED) displays Part 5-2: Mechanical endurance testing methods INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-6 First edition 1999-02 Mobile and fixed offshore units Electrical installations Part 6: Installation Unités mobiles et fixes en mer Installations électriques Partie 6:
Australian/New Zealand Standard TM
1 AS/NZS 1841.8:2007 AS/NZS 1841.8:2007 Australian/New Zealand Standard TM Portable fire extinguishers Part 8: Specific requirements for non-rechargeable type extinguishers 1 SCOPE This Standard specifies
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61138 Second edition 1994-04 Cables for portable earthing and short-circuiting equipment This English-language version is derived from the original bilingual publication by leaving
ISO INTERNATIONAL STANDARD. Ships and marine technology Lowlocation lighting on passenger ships Arrangement
INTERNATIONAL STANDARD ISO 15370 First edition 2001-04-15 Ships and marine technology Lowlocation lighting on passenger ships Arrangement Navires et technologie maritime Éclairage situé en bas sur les
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-3-5 Edition 2.0 2018-01 Environmental testing Part 3-5: Supporting documentation and guidance Confirmation of the performance of temperature chambers INTERNATIONAL ELECTROTECHNICAL
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-90 Edition 4.0 2015-08 Household and similar electrical appliances Safety Part 2-90: Particular requirements for commercial microwave ovens INTERNATIONAL ELECTROTECHNICAL
Testing coated fabrics
BRITISH STANDARD BS 3424-12: 1996 ISO 1419:1995 Incorporating Amendments Nos. 1 and 2 Testing coated fabrics Part 12: Accelerated ageing tests ICS 59.080.40 Committees responsible for this British Standard
AS AS Australian Standard. Potting mixes. This is a free 7 page sample. Access the full version online.
AS 3743 2003 AS 3743 Australian Standard Potting mixes This Australian Standard was prepared by Committee CS-037, Garden Soils and Potting Mixes. It was approved on behalf of the Council of Standards Australia
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-30 Edition 5.0 2009-11 Household and similar electrical appliances Safety Part 2-30: Particular requirements for room heaters INTERNATIONAL ELECTROTECHNICAL COMMISSION
This document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 8791-2 Second edition 2013-09-15 Paper and board Determination of roughness/smoothness (air leak methods) Part 2: Bendtsen method Papier et carton Détermination de la rugosité/du
AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016
Australian/New Zealand Standard AS/NZS 5149.1:2016 (ISO 5149-1:2014, MOD) Incorporating Amendment No. 1 Refrigerating systems and heat pumps Safety and environmental requirements Part 1: Definitions, classification
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61293 First edition 1994-06 Marking of electrical equipment with ratings related to electrical supply Safety requirements This English-language version is derived from the original
Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods KONSOLIDEERITUD TEKST
EESTI STANDARD EVS-EN 3-7:2004+A1:2007 Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods KONSOLIDEERITUD TEKST Portable fire extinguishers - Part 7: Characteristics,
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60068-2-52 Edition 3.0 2017-11 Environmental testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 19.040
ISO INTERNATIONAL STANDARD. Industrial fans Mechanical safety of fans Guarding
INTERNATIONAL STANDARD ISO 12499 First edition 1999-10-15 Industrial fans Mechanical safety of fans Guarding Ventilateurs industriels Sécurité mécanique des ventilateurs Protecteurs A Reference number
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62087-6 Edition 1.0 2015-06 colour inside Audio, video and related equipment Determination of power consumption Part 6: Audio equipment INTERNATIONAL ELECTROTECHNICAL COMMISSION
ISO INTERNATIONAL STANDARD. Fire protection Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles
INTERNATIONAL STANDARD ISO 6182-9 First edition 2005-11-01 Fire protection Automatic sprinkler system Part 9: Requirements and test methods for water mist nozzles Protection contre l'incendie Systèmes
ISO 3999 INTERNATIONAL STANDARD. Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests
INTERNATIONAL STANDARD ISO 3999 Second edition 2004-12-15 Radiation protection Apparatus for industrial gamma radiography Specifications for performance, design and tests Radioprotection Appareils pour
This is a preview - click here to buy the full publication ICS ISBN
CONSOLIDATED VERSION IEC 60691 Edition 4.1 2019-01 colour inside Thermal-links Requirements and application guide INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.120.50 ISBN 978-2-8322-6430-0 Warning!