CABLES AND ACCESSORIES FOR TRUBLUE DATA LOGGERS
|
|
|
- MargaretMargaret Blake
- 5 years ago
- Views:
Transcription
1 CABLES AND ACCESSORIES FOR TRUBLUE DATA LOGGERS CONTENTS TruBlue Cable Attachment System 2 Field Cables for Vented Gage Water Level Data Loggers 853-XXXXX, Interface Cable Assembly 3 Field Cables for Absolute Water Level Data Loggers 852-XXXXX, Suspension Wire Assembly 851-XXXXX, Direct Read Interface Cable 4 5 Communications Cables for Water Level Data Loggers , USB to Backshell Communication Cable , Technicians Communication Cable , USB to Hirose Communication Cable , Hirose to Flying Leads Communication Cable TruBlue Accessories Backshells Backshell for Auxiliary Battery Pack Auxiliary Battery Pack Anti-Fouling Screen Removable Cable Plug RS-485 to SDI-12 Convertor RS-485 to RS-232C Convertor TruBlue Well Hardware 2 Well Caps 4 Well Caps TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 1
2 TRUBLUE CABLE ATTACHMENT SYSTEM TruBlue Data Logger water-proof cable attachment mechanism features: Double O-ring design for redundant water prevention. Threaded parts insure positive and secure attachment. Free-rotating knurled collar on Backshell for easy grip and simple removal. The connectors are keyed to insure proper mating. This time-tested attachment mechanism provides users flexibility in matching data loggers and a variety of cable attachments while preventing moisture damage to either component. THE TRUBLUE CABLE SYSTEM FEATURES: Field Cables for permanent deployment of: Vented Gage Data Loggers Absolute and Baro Data Loggers Communication Cables to set-up tests and retrieve data from TruBlue Data Loggers Accessories for TruBlue Data Loggers TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 2
3 FIELD CABLES FOR VENTED GAGE DATA LOGGERS The 853-XXXXX INTERFACE CABLE ASSEMBLY includes power and communication conductors as well as a reference pressure vent tube. It should be used with all vented TruBlue data loggers. It provides the ability to communicate with the transducer without extracting it from its measurement location. The Interface Cable Assembly connects with Communication Cables via quick release Hirose connector. Each Interface Cable Assembly comes with a stainless steel cable hanger and an integrated vent filter featuring an eptfe breather plug and long life silica gel desiccant. Backshell connectors are available in two materials: 316 stainless steel for freshwater applications, and Titanium for saltwater and other aggressive environments Submersible cable length is configurable in lengths of 5 Ft. Or greater. Cable is available in two materials: Polyurethane for freshwater applications, and ETFE for saltwater and other aggressive environments 853-XXXXX 853 INTERFACE CABLE ASSEMBLY STAINLESS STEEL VENT FILTER WITH EPTFE BREATHER PLUG CONFIGURABLE LENGTHS TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 3
4 FIELD CABLES FOR ABSOLUTE DATA LOGGERS The 852-XXXXX SUSPENSION WIRE ASSEMBLY is a low cost suspension solution intended for use only with absolute data loggers. Since there is no vent tube or desiccant vent filter, maintenance is minimal. On the other hand, the fact there are no communication conductors in the cable means that in order to communicate with the data logger, it will need to be removed from its measurement location and attached to a communication cable. Each Suspension Wire Assembly comes with a Backshell, 316 FEP coated stainless steel wire and termination loop fitted with a stainless steel carbineer. Backshell connectors are available in two materials: 316 stainless steel for freshwater applications, and Titanium for saltwater and other aggressive environments The submersible stainless steel wire length is configurable in lengths from 0 to 999 feet. Absolute data loggers may also be deployed with no suspension wire. In this case the hole in the Backshell may be used to secure the data logger to a sturdy support. 852-XXXXX SUSPENSION WIRE ASSEMBLY CONFIGURABLE LENGTHS PART NUMBER (XXX = FT. OF CABLE) XXX XXX DESCRIPTION Stainless Steel Suspension Cable Stainless Steel Backshell Stainless Steel Suspension Cable Titanium Backshell TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 4
5 FIELD CABLES FOR ABSOLUTE DATA LOGGERS The 851-XXXXX DIRECT READ INTERFACE CABLE Is a low-cost solution intended for use only with absolute or CT data loggers. It Includes power and communications conductors to provide the ability to communicate with the data logger without extracting it from its measurement location. Since there is no vent tube or desiccant filter, maintenance is minimal. CONFIGURABLE LENGTHS ELECTRICAL TERMINATION 22AWG CONDUCTORS IN A SHIELDED CABLE WITH VENT TUBE SDI-12 RS-485 ALL RED BLACK WHITE RED BLACK WHITE GREEN DRAIN WIRE + SUPPLY - SUPPLY SIGNAL + SUPPLY - SUPPLY RS485-A RS485-B SHIELD PART NUMBER DESCRIPTION XXX Direct Read Interface Cable Stainless Steel Backshell and Poly Cable XXX Direct Read Interface Cable Titanium Backshell and ETFE Cable XXX Direct Read Interface Cable Titanium Backshell and Poly Cable Note: (XXX) = Cable length in Feet TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 5
6 COMMUNICATION CABLES FOR NON-VENTED DATA LOGGERS A variety of communication cable options can be used to communicate to TruBlue data loggers from your PC. The USB TO BACKSHELL COMMUNICATION CABLE is universal to vented gage and absolute level data loggers. This non-submersible communication cable can be used to set-up tests and to retrieve test data from the level data logger. The cable is intended to be used temporarily and is not intended for permanent attachment USB TO BACKSHELL COMMUNICATION CABLE Standard Cable Length (6 Ft) NON-THREADED, BACKSHELL CONNECTOR SLIDES ON AND OFF OPEN END OF LEVEL DATA LOGGER. THIS CONNECTION IS NOT WATER TIGHT. IT IS NOT DESIGNED FOR WATER IMMERSION. STANDARD CABLE LENGTH (6 FT) TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 6
7 COMMUNICATION CABLES FOR VENTED GAGE LEVEL DATA LOGGERS There are several choices for communication cables connecting to the Hirose connector on the 853-XXXXX Interface Cable Assembly. THE TECHNICIANS COMMUNICATION CABLE is an all-in-one adapter enabling connection to a mobile, laptop or desktop PC. It features built-in conversion to RS-232 and USB as well as a DC input connector. THE USB TO HIROSE COMMUNICATION CABLE enables connection directly to your PC USB port. THE HIROSE TO FLYING LEADS COMMUNICATION CABLE enables connection directly to terminals requiring flying leads cable TECHNICIANS COMMUNICATION CABLE STANDARD CABLE LENGTH (6 FT.) USB TO HIROSE COMMUNICATION CABLE STANDARD CABLE LENGTH (6 FT.) HIROSE TO FLYING LEADS COMMUNICATION CABLE STANDARD CABLE LENGTH (6 FT.) TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 7
8 SPARE REPLACABLE NOSE CAP Removable Ported Nose Cap made of Delrin, designed to protect the sensor diaphragm while still allowing access for cleaning. PN TRUBLUE BACKSHELLS Backshell only, no suspension wire. PN , 316 Stainless Steel PN , Titanium Backshell only, for Auxiliary Battery Pack PN , 316 Stainless Steel PN , Titanium AUXILIARY BATTERY PACK PN , Auxiliary Battery Pack 7.2V Lithium Battery TRUBLUE ANTI-FOULING SCREEN The TruBlue Anti-Fouling Screen PN provides extended protection to the sensor in combat of Marine Biofouling Organisms. The use of this screen allows for extended deployments and helps minimize maintenance requirements. PN /10 Copper-Nickel Alloy Easy Screw-On Design Extend Deployments and Reduce Maintenance Cost 1.0 in. OD X 3.25 in. L 3.7 oz. / 105g TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 8
9 REMOVABLE CABLE PLUG The Removable Cable Plug is designed to provide watertight protection to the exposed end of our removable cable, when the transducer/datalogger is removed. PN Stainless Steel PN Titanium Signal Convertors for Digital Transducers The RS-485 to SDI-12 Convertor is used to convert an RS-485 signal into a SDI-12 protocol signal PN The RS-485 to RS-232C Convertor is used to convert an RS-485 signal into a RS-232C signal PN TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 9
10 TRUBLUE WELL HARDWARE Locking Well Caps enable water level data loggers to be suspended within the well while providing security. The vented orange PVC caps are 2" or 4" ID and come with a 304 stainless steel dock (ring and threaded quick-link) to support a cable hanger. The dual-hinge locking lid uses a Buna-N/Nitril O-ring for a watertight seal. The black triangle warning label on the lid can be marked for well identification. PN 861-2A, 2" vented locking well cap w/dock PN 861-2B, 2" vented locking well cap PN 861-2C, 2" well dock PN 861-4A, 4" vented locking well cap w/dock PN 861-4B, 4" vented locking well cap PN 861-4C, 4" well dock NORTH AMERICA EUROPE ASIA Measurement Specialties, Inc., a TE Connectivity Company 1000 Lucas Way Hampton, VA United States Phone: Fax: WL.Sales@te.com MEAS Deutschland GmbH a TE Connectivity Company Hauert 13 D Dortmund Germany Phone: +49-(0) Fax: +49-(0) customercare.dtmd@te.com Measurement Specialties China Ltd., a TE Connectivity Company No. 26, Langshan Road High-tech Park (North) Nanshan District, Shenzhen China Phone: Fax: customercare.shzn@te.com te.com/sensorsolutions Measurement Specialties, Inc., a TE Connectivity company. Measurement Specialties (MEAS), American Sensor Technologies (AST), TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity s obligations shall only be as set forth in TE Connectivity s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application TE Connectivity Ltd. family of companies All Rights Reserved. TE CONNECTIVITY SENSORS /// CABLE AND ACCESSORIES FOR TRUBLUE DATA LOGGERS 07/2016 Page 10
86A SPECIFICATIONS. 316L SS Pressure Sensor Small Profile V High Level Output Gage, Absolute ASIC Calibrated
(Image displays Absolute type) 86A SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0.5-4.5V High Level Output Gage, Absolute ASIC Calibrated The 86A is a small profile, media compatible, piezoresistive
SPECIFICATIONS. SENSOR SOLUTIONS ///LM Page 1 09/2015
SPECIFICATIONS 316L SS Pressure Sensor with PVC Threads Small Profile 4.5V (typ) High Level Output Gage, Absolute, Sealed Gage ASIC Calibrated Variety of Cable Lengths The LM incorporates stainless steel
DOG2 MEMS SERIES CAN J1939 INCLINOMETER
DOG2 MEMS SERIES CAN J1939 INCLINOMETER SPECIFICATIONS Dual axis inclinometer Measurement ranges ±90 CAN J1939 interface FEATURES 8 30 VDC supply voltage Digital signal processing includes o filter (e.g.
89BSD Digital Output
SPECIFICATIONS Stainless Steel with O-Ring Seal Pressure/Temperature Read-Out (24-bit DS ADC) ASIC Calibrated Absolute, Sealed Gage 9mm Diameter The 89BSD is a 9mm diameter small profile, media compatible,
TS105-10L5.5MM Thermopile Sensor
SPECIFICATIONS Thermopile IR-Sensor For Contactless Temperature Measurement Single Element For Industrial Pyrometers Silicon Lens Accurate Reference Sensor Thermopiles are mainly used for contactless temperature
82 Constant Voltage SPECIFICATIONS. 316L SS Pressure Sensor 19mm Diameter Package 0-100mV Output Absolute and Gage Temperature Compensated
SPECIFICATIONS 316L SS Pressure Sensor 19mm Diameter Package 0-100mV Output Absolute and Gage Temperature Compensated The 82 constant voltage is a 19 mm small profile, media compatible, piezoresistive
MS1471 SPECIFICATIONS. PC Board Mountable Pressure Sensor 0-60 mv Output Gage and Absolute Low Cost
SPECIFICATIONS PC Board Mountable Pressure Sensor 0-60 mv Output Gage and Absolute Low Cost The MS1471 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended
TESS WIRELESS SENSOR TAG DEMO V1.1
TESS WIRELESS SENSOR TAG DEMO V1.1 Standard 2.4GHz Wireless Communication Tag Humidity: 0-100% RH Temperature: -20 C to +85 C Pressure: 300 to 1,200mBar ios, Android and Windows PC Compatible The sensor
ED-18 Analog Output Series Magnetic Encoder SPECIFICATIONS
ED-18 Analog Output Series Magnetic Encoder SPECIFICATIONS Analog voltage or current output Low profile IP52 sealing Sleeve or ball bearing Excellent stability no optic degradation The ED-18 Series Magnetic
86 Compensated SPECIFICATIONS. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated
Compensated SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated The 86 compensated is a small profile, media compatible, piezoresistive silicon
MODEL 4000A & 4001A ACCELEROMETER
MODEL 4000A & 4001A ACCELEROMETER dimensions 4001A Connector Attachment SPECIFICATIONS Silicone MEMS Accelerometer Signal Conditioned Output Temperature Calibrated Low Cost, Lightweight The Model 4000A
86BSD Digital Output
SPECIFICATIONS Stainless steel with O-ring seal Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option 16mm diaphragm diameter The 86BSD is
86BSD Digital Output
SPECIFICATIONS Stainless steel with O-ring seal Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option 16mm diaphragm diameter The 86BSD is
P125 High Pressure Sensor
High Pressure Sensor SPECIFICATIONS Ranges from 2000 to 7000 bar (30k to 100k psi) Stainless steel pressure port Robust for Fatigue testing For static and dynamic applications Linearity up to ±0.3% F.S.
154BC SPECIFICATIONS FEATURES APPLICATIONS STANDARD RANGES
SPECIFICATIONS Low Cost 316L Stainless Steel or Titanium 19mm Diameter Package 0-100mV Output Gage and Absolute Wide Compensated Temperature Range FEATURES O-Ring Mount -20ºC to +85ºC Compensated Temperature
86BSD Digital Output
SPECIFICATIONS Stainless steel with O-ring seal Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option 16mm diaphragm diameter The 86BSD is
86 Compensated SPECIFICATIONS. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated
SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature The 86 compensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged
316L SS Pressure Sensor High Pressure 0-100mV Output Absolute
SPECIFICATIONS 316L SS Pressure Sensor High Pressure 0-100mV Output Absolute The 89 uncompensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless
M5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations FEATURES CE Compliance Reverse Polarity Protection
PT9600. Cable Actuated Encoder Reel. General. Environmental
Cable Actuated Encoder Reel Converts ANY Rotary Encoder to a Linear Position Sensor Linear Stroke Range up to 550 inches (14 m) Mates Virtually ANY Customer Supplied Encoder Factory Supplied Encoder Available
OPERATION MANUAL MODEL 4610 ACCELEROMETER
OPERATION MANUAL MODEL 4610 ACCELEROMETER TE CONNECTIVITY SENSORS///MODEL 4610 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year
MSP100 Pressure Transducer
SPECIFICATIONS Analog and 14-Bit Digital Output Available Small Size Low Cost 316L Stainless Steel or 17-4PH FEATURES Single Piece Construction; No Welds, No Oil 100% Stainless Steel Isolation for Harsh
154BC SPECIFICATIONS. Please refer to the 154N uncompensated and constant voltage datasheets for more information on different features of the 154.
SPECIFICATIONS Low Cost 316L Stainless Steel or Titanium 19mm Diameter Package 0-100mV Output Gage and Absolute Wide Compensated Temperature Range The 154BC is a 19mm small profile, media compatible, piezoresistive
SGJ. 80, 120-inch Stroke Range Options. Polycarbonate Enclosure IP67. In Stock for Quick Delivery. General. CANbus Specifications
Cable Actuated Sensor Compact Mid-Range String Pot Absolute Position 80, 120-inch Stroke Range Options Polycarbonate Enclosure IP67 In Stock for Quick Delivery General Stroke Range Options Accuracy Repeatability
OPERATION MANUAL Model 8011 & mA
OPERATION MANUAL Model 8011 & 8021 4-20mA TE CONNECTIVITY SENSORS/// MODEL 8011 & 8021 4-20MA 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year
316L SS Pressure Sensor High Pressure 0-100mV Output Absolute
SPECIFICATIONS 316L SS Pressure Sensor High Pressure 0-100mV Output Absolute The 89 uncompensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless
OPERATION MANUAL MODEL & ACCELEROMETER
OPERATION MANUAL MODEL 8011-01 & 8021-01 ACCELEROMETER TE CONNECTIVITY SENSORS///MODEL 8011-01 & 8021-01 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted
85 Compensated SPECIFICATIONS. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated
SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature The 85 compensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged
85 Uncompensated SPECIFICATIONS FEATURES APPLICATIONS STANDARD RANGES. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage
FEATURES Weldable and Threaded Process Fittings -40ºC to +125ºC Operating Temperature ±0.1% Pressure Non Linearity Solid State Reliability APPLICATIONS Medical Instruments Process Control Fresh & Waste
Standard SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS PC Board Mountable Pressure Sensor 0-50 mv Output Voltage Excitation Gage, Absolute, and Differential Temperature Compensated FEATURES Dual-in-Line Package 0ºC to 50ºC Compensated Temperature
MEAS Subermsible Liquid Level Pressure Transducer SPECIFICATIONS. Features. Applications
MEAS 5700 Subermsible Liquid Level Pressure Transducer Features Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.25% Accuracy
DP86 Constant Voltage with Fitting
SPECIFICATIONS 316L SS Wet/Wet Differential Low Pressure 0 100mV Output The DP86 constant voltage with fitting differential pressure sensor is a double-sided, media compatible, piezoresistive silicon pressure
MSP100 Pressure Transducer
SPECIFICATIONS Analog and 14-Bit Digital Output Small Size Low Cost 316L Stainless Steel or 17-4PH FEATURES Single Piece Construction; No Welds, No Oil 100% Stainless Steel Isolation for Harsh Chemical
86 Compensated SPECIFICATIONS. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated
Compensated SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated The 86 compensated is a small profile, media compatible, piezoresistive silicon
M5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations Optional Stainless Steel Snubber CE Compliant
U86B. Urea Dosing SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output SENT Output Optional (contact factory for details) FEATURES
OPERATION MANUAL MODEL 8102 ACCELEROMETER
OPERATION MANUAL TE CONNECTIVITY SENSORS/// 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year from date of shipment to original purchaser to
SKJ. Specifications. Stroke Range Options 250 inches (6.4 m), 400 inches (10.2 m)
Cable Actuated Sensor Linear Position to 400 inches (10 m) Compact Design Simple To Install User Adjustable Measuring Cable Orientation IN STOCK for Quick Delivery! Specifications Stroke Range Options
U5600. Wireless Pressure Transducer SPECIFICATIONS
SPECIFICATIONS Enhanced Pressure Accuracy Digital 24-bit ADC Output, I 2 C Protocol Wireless Bluetooth 4.0 Connection CE Compliant with Variety of Pressure Ports Compact and Battery Powered [CR2050] Optional
FC23 Compression Load Cell
SPECIFICATIONS 50 2000 lbf Ranges High Level or mv Interchangeable Compact Load Button Design Industry Standard Packaging CE Compliance FEATURES Interchangeable Low Noise Robust: High Over-Range Capability
MSP340 Pressure Transducer
Shown with Packard Connector Shown with Packard Connector MSP40 SPECIFICATIONS Low Cost OEM 100% Leak Proof No O-Rings No Silicon Oil No Welds FEATURES One-Piece Stainless Steel Construction Ranges up
Sub psi SPECIFICATIONS
SPECIFICATIONS PC Board Mountable Pressure Sensor 40 mv Output Typical Differential Pressures Metal Tube and Ceramic Barbed Ports Temperature Compensated The 1210 sub PSI is a temperature compensated,
OPERATION MANUAL MODEL mA
OPERATION MANUAL MODEL 8042 4-20mA TE CONNECTIVITY SENSORS/// MODEL 8042 4-20MA 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year from date
OPERATION MANUAL MODEL 805 ACCELEROMETER
OPERATION MANUAL MODEL 805 ACCELEROMETER TE CONNECTIVITY SENSORS /// MODEL 805 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year
U5700 Submersible Liquid Level Pressure Transducer
SPECIFICATIONS High Accuracy CE Compliant and Waterproof UL Certified Variety of Pressure Port Configurations Waterproof Optional Stainless Steel Snubber IP68 Rated Connection and Submersible Polyurethane
OPERATION MANUAL MODEL 3255A ACCELEROMETER
OPERATION MANUAL MODEL 3255A ACCELEROMETER TE CONNECTIVITY SENSORS /// MODEL 3255A ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one
PT9101. General. Potentiometer Cycle Life 250,000 Maximum Retraction. Weight, Aluminum (Stainless 8 lbs. (16 lbs.) max. Electrical
Cable Actuated Sensor Absolute Linear Position to 550 inches (1400 cm) Aluminum or Stainless Steel Enclosure Options VLS Option to Prevent Free-Release Damage IP68 NEMA 6 Protection General Full Stroke
M7100 Pressure Transducer
SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces
TSYS02S Digital Temperature Sensor
SPECIFICATIONS High Accuracy Temperature Sensor 16 bit Resolution High Speed, low Response Time Low Power Consumption SDM Output representing Analogue Voltage Small TDFN8 Package The TSYS02S is a single
FC22 Compression Load Cell
SPECIFICATIONS 10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design CE Compliance FEATURES Small Size Low Noise Robust: High Over-Range Capability High Reliability
PT9420 (Extended Range)
(Extended Range) Cable Actuated Sensor Absolute Linear Position to 1700 inches (4300 cm) Stroke Range Options: 0-600 to 0-1700 inches VLS Option to Prevent Free-Release Damage IP68 NEMA 6 Protection Hazardous
TSEV01S01C10 SPECIFICATIONS
SPECIFICATIONS Contact less Temperature Measurement Small Size Heat Spreader improves Accuracy Wide Supply Voltage Range Digital Interface Bus (SPI) Connector Small Field of View The TSEV01S01C10 is a
OPERATION MANUAL MODEL 3038 ACCELEROMETER
OPERATION MANUAL MODEL 3038 ACCELEROMETER TE CONNECTIVITY SENSORS /// MODEL 3038 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one
U5300 Industrial Pressure Transducer
FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.1% Accuracy ±0.5% Total Error Band Compact Outline -40 C to +125 C
TESS WIRELESS SENSOR TAG DEMO V1.1
TESS WIRELESS SENSOR TAG DEMO V1.1 Standard 2.4GHz Wireless Communication Tag Humidity: 0-100% RH Temperature: -20 C to +85 C Pressure: 300 to 1,200mBar Applications Smart building Smart home HVAC controller
The Importance of Pressure Sensors in HVACR Systems
The Importance of Pressure Sensors in HVACR Systems How TE Connectivity s (TE) M3200 Meets New Performance Standards It s Simple, Reliable, Robust By Devin Brock, Manager for Product Knowledge and Training,
D5100 Industrial Differential Pressure Transducer
FEATURES Heavy Industrial CE Approval (amplified only) As Low As ±0.1% Pressure Non Linearity Rugged Construction: Can Withstand 50g Shock/20g Vibration Up to -40 C to +125 C Operating Temperature Range
LMM-H04 Mass Air FLow Sensor
Mass Air FLow Sensor Product Description LMM-H04 is a thermodynamic sensing element for the unidirectional measurement of mass air flow in a well defined channel. It is dedicated for applications with
M5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof UL Certified Gage, Sealed, Compound
SPECIFICATIONS Triaxial Piezoelectric Accelerometer Cable Actuated Sensor Industrial Incremental Encoder Output
Cable Actuated Sensor Output Linear Position up to 175 inches (3 meters) 0-125, 0-175 inch Full Stroke Range Options Designed for Outdoor & IP67 environments In Stock for Quick Delivery! 175-inch model
15203B 25203B 35203B Uniaxial Biaxia Triaxial
Uniaxial Biaxia Triaxial SPECIFICATIONS Digital Accelerometers User Configurable ±1 g to ±15 g Inertial Measurements Made Fast and Easy FEATURES AND BENEFITS User Configurable Settings The analog/digital
MS4525DO SPECIFICATIONS FEATURES APPLICATIONS
FEATURES PSI Pressure Ranges PCB Mountable Digital Output Barbed Pressure Ports APPLICATIONS Blocked Filter Detection Altitude and Airspeed Measurements Medical Instruments Fire Suppression System Panel
LMM-H03 Mass Air FLow Sensor
Mass Air FLow Sensor Product Description LMM-H03 is a thermodynamic sensing element for the bidirectional measurement of mass air flow in a well defined channel. It is dedicated for applications with high
MEAS SENSOR TAG APP INSTALLATION GUIDE FOR IOS
INSTALLATION GUIDE FOR IOS This document describes the installation of the Measurement Specialties sensor tag application for ios. Contents 1 Installation... 2 1.1 Prerequisite... 2 1.2 Download Application...
D5100 Industrial Differential Pressure Transducer
SPECIFICATIONS 316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections
OPERATION MANUAL MODEL 805M1 ACCELEROMETER
OPERATION MANUAL TE CONNECTIVITY SENSORS /// 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year from date of shipment to original purchaser to
MEAS PICTAIL PLUS FOR MICROCHIP EXPLORER 16
FOR MICROCHIP EXPLORER 16 SENSOR SOLUTIONS /// MEAS PICTAIL PLUS 08/2016 Page 1 Microchip Explorer 16 Board Setup PIM used for the sample code is PIC24FJ128GA010. SENSOR SOLUTIONS /// MEAS PICTAIL PLUS
PT9150 (Extended Range)
(Extended Range) Cable Actuated Sensor Extended Ranges Incremental Encoder Linear Position to 1700 inches (4300 cm) Stroke Range Options: 0-600 to 0-1700 inches VLS Option to Prevent Free-Release Damage
Cable Actuated Sensor Industrial User Scalable VDC Output
Cable Actuated Sensor Industrial User Scalable VDC Output User Signal Adjustable Stroke Range to 175 inches (3 meters) User Selectable 0 5, 0 10, 5 +5, 10 +10 VDC Output Designed for Outdoor & IP67 environments
Cable Actuated Sensor Industrial User Scalable 4 20mA
Cable Actuated Sensor User Adjustable Stroke Range to 175 inches (3 meters) Easy Push-Button Zero and Span Adjust Designed for Outdoor & IP67 environments In Stock for Quick Delivery! 175-inch model shown
LOW PRESSURE Intrinsically Safe Transducer AST44LP
Intrinsically Safe Transducer AST44LP Overview The AST44LP is a stainless steel pressure transducer with a wide variety of options. With its rugged construction and the best price-toperformance ratio in
MEAS SENSOR TAG APP INSTALLATION GUIDE FOR ANDROID
INSTALLATION GUIDE FOR ANDROID This document describes the installation of the Measurement Specialties sensor tag application for Android devices. Contents 1 Installation... 2 1.1 Prerequisite... 22 1.2
MSP300 Pressure Transducer
SECIFICATIONS Analog Output or 14-Bit Digital ressure with 11-Bit Temperature Output One iece Stainless Steel Construction Low Cost 17-4H or 316L Stainless Steel Customizable FEATURES One iece Stainless
DOG2 MEMS SERIES USB INCLINOMETER
1 DOG2-USB_1630-21559-0018-E-0118 DOG2 MEMS SERIES USB INCLINOMETER SPECIFICATIONS Dual axis inclinometer Measurement range ±90 High resolution Good accuracy Fast response time Easy to use software FEATURES
INTRINSICALLY SAFE Pressure Transducer / Transmitter AST4400
Pressure Transducer / Transmitter AST4400 Overview The AST4400 is a stainless steel pressure transducer with a wide variety of options. With its rugged construction and best price-toperformance ratio in
MS4525 SPECIFICATIONS
SPECIFICATIONS PCB Mounted Pressure Transducers Amplified Ratiometric Analog Output Differential, Gage, Absolute, Compound, & Vacuum Temperature Compensated 3.3 or 5.0 V DC Supply Voltage The MS4525 is
INTRINSICALLY SAFE Pressure Transducer / Transmitter AST4401
Pressure Transducer / Transmitter AST4401 Overview The AST4401 is a stainless steel pressure transducer with a wide variety of options. With its rugged construction and best price-toperformance ratio in
ELAF LOAD CELL SPECIFICATIONS FEATURES
FEATURES Low Cost Optional High Level Output Small, Low Profile Design Low Noise Robust: High Over Range High Reliability Low Deflection Low Off-Axis Response APPLICATIONS Theatrical Rigging Loads Assembly
PT101. General. Full Stroke Range Options. Potentiometer Cycle Life Maximum Retraction Acceleration. Electrical
Cable Actuated Sensor Absolute Linear Position Classic Stringpot Design Stroke Range Options: 0 2 to 0 100 inches Powder Painted & Anodized Aluminum Enclosure Industrial Automation & Testing Applications
MEAS EMITTER ASSEMBLY ELM-4000 SERIES
MEAS EMITTER ASSEMBLY ELM-4000 SERIES SpO2 optical sensor component Dual Drive Lead Frame Construction Pulse Oximetry Component Clear Epoxy Low oxygen level can put a strain on cell functioning including
MINIATURE ELECTRONIC PRESSURE SCANNERS ESP-16HD/32HD/64HD
MINIATURE ELECTRONIC PRESSURE SCANNERS Features Unparalleled Long Term Stability Digital Temperature Compensation (DTC) Individual Offset and Thermal Zero Compensation Automatically Switched Reference
SUBMERSIBLE Flush Diaphragm Liquid Level Sensor AST4520
Flush Diaphragm Liquid Level Sensor AST4520 Overview The AST4520 Flush Submersible liquid level sensor is the cost effective solution for level monitoring of turbulent tanks with viscous media. Approved
TE Connectivity's AMP NETCONNECT Cable Management
One of the major challenges facing cabling mounting holes installers and maintenance personnel is organizing distribution cables and patch cords in the telecommunications room. TE Connectivity's AMP NETCONNECT
MODEL ACCELEROMETER
MODEL 8711-01 ACCELEROMETER SPECIFICATIONS Industrial IEPE Accelerometer Low Cost, Quick Delivery -55 C to +125 C Operating Range Top Exit Connector DIMENSIONS The Model 8711-01 are internally shielded
FIST-EDSA-D4. 3 Feeder cable/ducts (max 16 mm) 4 Drop cable (DB cable or guiding tubes 5-8 mm) 5 Adding drop cable. 6 Gel part replacement
FIST-EDSA I N S T A L L A T I O N I N S T R U C T I O N FIST-EDSA-D4 Content 1 Introduction 2 Kit content 3 Feeder cable/ducts (max 16 mm) 4 Drop cable (DB cable or guiding tubes 5-8 mm) 5 Adding drop
HTF3000LF PVH-3.3 TEMPERATURE AND HUMIDITY MODULE
TEMPERATURE AND HUMIDITY MODULE Compliant with RoHS recommendations Based on the rugged HS1101LF humidity sensor, HTF3000LF PVH-3.3 is a dedicated humidity and temperature transducer designed for OEM applications
Seal Kits for BUDI Enclosures
Description BUDI is a product range of compact, wall mountable fiber enclosures for indoor and outdoor use. They are specifically designed for fast deployment and easy customer connection. The FIST management
Small Box for Cable Termination. 3.1 Preparation of box 3.3 Mounting of the box on the wall
FIST-SB2-8 I N S T A L L A T I O N I N S T R U C T I O N Small Box for Cable Termination Contents 1 Introduction 1.1 Product description 2 General 2.1 Tools 2.2 Kit contents 3 Installation and pre-assembling
DTS SERIES CONNECTORS
DEUTSCH DTS SERIES CONNECTORS FOR MIL-DTL-38999 SERIES III RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS TE DEUTSCH MIL-DTL-38999 SERIES III CONNECTORS QUICK REFERENCE GUIDE Wide Range Mil spec, commercial,
HM1520LF Relative Humidity Module
SPECIFICATIONS Tubular form for through wall mounting Product free from Lead, Cr(6+), Cd and Hg Calibrated, linear voltage for easy electronic interface Typical 1 to 1.6 Volt DC output for 0 to 20% RH
HM1500LF Relative Humidity Module
SPECIFICATIONS Small size product Product free from Lead, Cr(6+), Cd and Hg Humidity calibrated within +/-2% @55%RH Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply Ratiometric to voltage
DSF xx15.xx xhv Ex-Atex Ex-Atex Certified Two wire Hall Effect Speed Sensor
DSF xx15.xx xhv Ex-Atex Product ID Type # Product # Drawing # DSF 1215.01 SHV Ex-atex (5m) 304Z-05197 113216 DSF 1415.01 AHV Ex-atex S148 304Z-05256 113351 DSF 1615.01 SHV Ex-atex (5m) 304Z-05196 113214
Side Entry Bushing (SEB) High Temperature Cable Clamp Bushing Installation Instructions
Page: 1 of 6 High Temperature Cable Clamp Bushing is a strain relief, and stress protection product that can be placed around a wire bundle and under a saddle clamp backshell adapter after the contacts
UV-SCE. Ultra-Violet light, Resistant TECHNICAL DATASHEET. Heat Shrink Identification Marker Sleeves
UV-SCE Ultra-Violet light, Resistant Heat Shrink Identification Marker Sleeves TECHNICAL DATASHEET Revision 4, March 2015 UV-SCE Ultra-Violet Light Resistant, Heat Shrink Identification Marker Sleeves
DSF xx10.xx xhv Ex-Atex Hall Effect Single Channel Speed Sensor
Product ID Type # Product # Drawing # DSF 1210.00 SHV Ex-atex (2m) 374Z-05066 110428F1 DSF 1210.00 SHV Ex-atex (5m) 374Z-05176 110428F1 DSF 1210.00 SHV Ex-atex (10m) 374Z-05590 110428F1 DSF 1410.00 SHV
C Electrical Connection Kit
1548-4010C Electrical Connection Kit For Use With Dekoron 2700 and 2300 Family of Heating Cables Installation Instructions Kit Description The Dekoron 1548-4010C electrical connection and end seal kit
APPLICATIONS. Wireless Communications systems. (LAN, GSM, PCS, WCDMA, UMTS) Remote measuring equipment
RoHS Ready UMCC Ultraminiature Coax Connector & Cable Assembly Series DESCRIPTION Tyco Electronics introduces the Ultraminiature Coax Connector and Cable Assembly series products. The UMCC series is an
DSS SERIES. Single Channel Hall Effect Speed Sensor. Product ID
Product ID Type # Product # Drawing # 378Z-05380 DSS 1210.00 STV (5m) 113807 374Z-04996 DSS 1210.02 PHV 112705 374Z-05052 DSS 1210.02 SHV (2m) 112865 378Z-05864 DSS 1210.12 AHV 115675 378Z-05910 DSS 1210.13
EET V-9 white PVC Labels
EET V-9 white PVC Labels Technical Datasheet TTDS-207 Revision 1 - September 2017 EET V-9 is a thermal transfer printable white, soft-pvc label with a permanent acrylic adhesive, ideal for rounded, irregular