EET V-9 white PVC Labels
|
|
- Myles Murphy
- 5 years ago
- Views:
Transcription
1 EET V-9 white PVC Labels Technical Datasheet TTDS-207 Revision 1 - September 2017 EET V-9 is a thermal transfer printable white, soft-pvc label with a permanent acrylic adhesive, ideal for rounded, irregular or bendable surfaces. It is also suitable for wire and cable identifications in flag mode, as shown in TE Connectivity Self-Laminating Flag Labelling User Guide EET V-9 PVC labels are designed to withstand oil, mild cleaning agents, water and climatic influences. The labels can be used for rack, panel and rating plate applications. Print performance and durability can only be guaranteed when printed using TE Connectivity printers, ribbons and software, as shown in TE Connectivity Printer Ribbon Matrix EET V9 PVC labels are available as part of a complete identification system. The system comprises specific printers, thermal transfer ribbons and WINTOTAL and Print Easy software. PAGE 1
2 EET V-9 WHITE PVC LABELS Features Temperature Rating Thermal transfer printable Service Temperature Permanent high-temperature pressure sensitive acrylic adhesive Flexible Identification on irregular surfaces -40 C to +110 C ( -40 F to +230 F) Min. Application Temperature: 0 C (32 F) Good adhesion to low energy surfaces (e.g. Polypropylene) Applications Design for Environment Excellent conformability to round, irregular or flexible Does not contain any declarable or prohibited sub- surfaces Electronic component labeling Industrial and Commercial applications Aerospace and Defence applications stances from the UNIFE Railway Industry Substances List Further information and a downloadable declaration covering RoHS and REACH compliance can be found at the TE Product Compliance Support Centre: Shelf Life 2 years when following good commercial storage practice detailed below Storage Product should be stored in the original packaging, with any plastic covers which were included during shipping. Store out of direct sunlight in a clean, dry, dust free, environment. Product should not be stored outside of the designed storage temperature, which is 20 to 25 C (68 F to 77 F), 40 to 50 % RH. PAGE 2
3 EET V-9, white PVC Labels Technical Performance Print Permanence Marking of Electrical Insulating Materials, SAE AS 5942 Requirement Legible after 50 rubs 1kg weight with an eraser Results Resistance to Solvents, MIL STD 202 Method 215 Legible after 30 wipes Fluid Exposure Adhesive Printed legend IPA Isopropyl Alcohol IRM 902 MIL PRF MIL-H Diesel Fuel Kilfrost DF plus Tap water Labels to remain legible / SAE AS 5942 (TE doc ) 24 hours immersion at 23 C followed by 20 rubs with cloth, minimum print contrast 3*, legible *Print contrast as defined in TE doc % Salt solution Detergent (1% solution) Adhesion to FTM1 (180 ) Typical Peel force (N/25mm (oz/in.)) Test surface: FTM1 (180 ) 20min Dwell 72hr Dwell Stainless steel Glass Aluminium Polypropylene Epoxy painted surface 11 (40.2) 12 (42.4) 15 (54.0) 20 (72.9) 12 (42.4) 15 (54.0) 8 (31.2) 10 (37.8) 12 (42.4) 34 (124.2) Flammability Average burn time, ASTM D1000 Burn time less than 10 seconds., typical burn time 5 seconds Burn rate FMVSS 302 Weatherability Maximum burn rate 120mm/min. Artificial weathering to ASTM G154 Labels to remain legible after 720 h, UV-A and UV-B, samples remain legible TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. Where possible, TE have tested product as a finished item, including the print. Operational tests are followed by an assessment of mark adherence to validate fit, form and function. PAGE 3
4 EET V-9, white PVC Labels Part Description EET V -9 9 Colour (white) V Material (soft-pvc) 15 Label Width (mm) 06 Label Height (mm) EET Product Family Specify product name, Label Height (mm), Label Width (mm), Material, Colour (only available in white) Ordering Information Ordering Description Pack Size Labels Across Label Width A Label Height B Horizontal Repeat C Vertical Repeat D Web Width E EET-0615V-9 10, EET-0623V-9 10, EET-0818V-9 10, EET-1056V-9 3, N/A N/A EET-1325V-9 10, EET-1938V-9 3, EET-2551V-9 3, N/A N/A EET-5176V-9 3, N/A N/A EET-6090V-9 3, N/A N/A PAGE 4
5 EET V-9, white PVC Labels Ordering Information - Continuous Roll Ordering Description Roll Width (mm) Printable Width (mm) Core Diameter (mm) Roll Length (m) Quantity per pack EET-M0080V EET-M0100V continuous continuous ROLL WIDTH PAGE 5
6 EET V-9, white PVC Labels Printer Information Print quality and print performance can only be guaranteed when specific TE printer and ribbons are used. The current list of printers and ribbons can be found in TE document Identification Printer Product Ribbon Matrix. This document can be found in Access Our Tools : Software WINTOTAL software, available to download for a 14 day evaluation period from the Identification Printer Software page: printers-software/printing-software.html?tab=pgp-story Print Easy software also available Contact a TE representative for further information TE Connectivity, TE Connectivity (logo) and Every Connection Counts are trademarks. All other logos, products and/or company names referred to herein might be trademarks of their respective owners. The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity s obligations shall only be as set forth in TE Connectivity s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application TE Connectivity Ltd. family of companies All Rights Reserved. PAGE 6 CLASS 1 DATA CLASSIFICATION - SEE POLICY TEC-02-04
SBP Self Laminating Wire and Cable Markers
SBP Self Laminating Wire and Cable Markers Technical Datasheet TTDS-211 Revision 8 - April 2017 SBP is a clear vinyl film with a white thermal transfer printable area. On application, the clear film over-laminates
More informationUV-SCE. Ultra-Violet light, Resistant TECHNICAL DATASHEET. Heat Shrink Identification Marker Sleeves
UV-SCE Ultra-Violet light, Resistant Heat Shrink Identification Marker Sleeves TECHNICAL DATASHEET Revision 4, March 2015 UV-SCE Ultra-Violet Light Resistant, Heat Shrink Identification Marker Sleeves
More informationTyco Electronics Solar Identification Labels
Tyco Electronics Solar Identification Labels 2010 Tyco Electronics Corporation. All Rights Reserved TE logo and Tyco Electronics are trademarks. Other products, logos and Company names mentioned herein
More informationDP86 Constant Voltage with Fitting
SPECIFICATIONS 316L SS Wet/Wet Differential Low Pressure 0 100mV Output The DP86 constant voltage with fitting differential pressure sensor is a double-sided, media compatible, piezoresistive silicon pressure
More informationTE Connectivity's AMP NETCONNECT Cable Management
One of the major challenges facing cabling mounting holes installers and maintenance personnel is organizing distribution cables and patch cords in the telecommunications room. TE Connectivity's AMP NETCONNECT
More information154BC SPECIFICATIONS. Please refer to the 154N uncompensated and constant voltage datasheets for more information on different features of the 154.
SPECIFICATIONS Low Cost 316L Stainless Steel or Titanium 19mm Diameter Package 0-100mV Output Gage and Absolute Wide Compensated Temperature Range The 154BC is a 19mm small profile, media compatible, piezoresistive
More informationIntroducing Solar Identification Labels
Introducing Solar Identification Labels Solar Identification Labels KEY FEATURES Recommended for use in identification of DC Disconnects and Inverters. For use on painted smooth metal and textured metal
More informationSGJ. 80, 120-inch Stroke Range Options. Polycarbonate Enclosure IP67. In Stock for Quick Delivery. General. CANbus Specifications
Cable Actuated Sensor Compact Mid-Range String Pot Absolute Position 80, 120-inch Stroke Range Options Polycarbonate Enclosure IP67 In Stock for Quick Delivery General Stroke Range Options Accuracy Repeatability
More informationMEAS SENSOR TAG APP INSTALLATION GUIDE FOR ANDROID
INSTALLATION GUIDE FOR ANDROID This document describes the installation of the Measurement Specialties sensor tag application for Android devices. Contents 1 Installation... 2 1.1 Prerequisite... 22 1.2
More information154BC SPECIFICATIONS FEATURES APPLICATIONS STANDARD RANGES
SPECIFICATIONS Low Cost 316L Stainless Steel or Titanium 19mm Diameter Package 0-100mV Output Gage and Absolute Wide Compensated Temperature Range FEATURES O-Ring Mount -20ºC to +85ºC Compensated Temperature
More informationStandard SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS PC Board Mountable Pressure Sensor 0-50 mv Output Voltage Excitation Gage, Absolute, and Differential Temperature Compensated FEATURES Dual-in-Line Package 0ºC to 50ºC Compensated Temperature
More informationMEAS SENSOR TAG APP INSTALLATION GUIDE FOR IOS
INSTALLATION GUIDE FOR IOS This document describes the installation of the Measurement Specialties sensor tag application for ios. Contents 1 Installation... 2 1.1 Prerequisite... 2 1.2 Download Application...
More informationSKJ. Specifications. Stroke Range Options 250 inches (6.4 m), 400 inches (10.2 m)
Cable Actuated Sensor Linear Position to 400 inches (10 m) Compact Design Simple To Install User Adjustable Measuring Cable Orientation IN STOCK for Quick Delivery! Specifications Stroke Range Options
More informationPT9150 (Extended Range)
(Extended Range) Cable Actuated Sensor Extended Ranges Incremental Encoder Linear Position to 1700 inches (4300 cm) Stroke Range Options: 0-600 to 0-1700 inches VLS Option to Prevent Free-Release Damage
More informationSub psi SPECIFICATIONS
SPECIFICATIONS PC Board Mountable Pressure Sensor 40 mv Output Typical Differential Pressures Metal Tube and Ceramic Barbed Ports Temperature Compensated The 1210 sub PSI is a temperature compensated,
More information86 Compensated SPECIFICATIONS. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated
SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature The 86 compensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged
More information82 Constant Voltage SPECIFICATIONS. 316L SS Pressure Sensor 19mm Diameter Package 0-100mV Output Absolute and Gage Temperature Compensated
SPECIFICATIONS 316L SS Pressure Sensor 19mm Diameter Package 0-100mV Output Absolute and Gage Temperature Compensated The 82 constant voltage is a 19 mm small profile, media compatible, piezoresistive
More informationMSP340 Pressure Transducer
Shown with Packard Connector Shown with Packard Connector MSP40 SPECIFICATIONS Low Cost OEM 100% Leak Proof No O-Rings No Silicon Oil No Welds FEATURES One-Piece Stainless Steel Construction Ranges up
More informationPT101. General. Full Stroke Range Options. Potentiometer Cycle Life Maximum Retraction Acceleration. Electrical
Cable Actuated Sensor Absolute Linear Position Classic Stringpot Design Stroke Range Options: 0 2 to 0 100 inches Powder Painted & Anodized Aluminum Enclosure Industrial Automation & Testing Applications
More informationCable Actuated Sensor Industrial Incremental Encoder Output
Cable Actuated Sensor Output Linear Position up to 175 inches (3 meters) 0-125, 0-175 inch Full Stroke Range Options Designed for Outdoor & IP67 environments In Stock for Quick Delivery! 175-inch model
More informationPT9600. Cable Actuated Encoder Reel. General. Environmental
Cable Actuated Encoder Reel Converts ANY Rotary Encoder to a Linear Position Sensor Linear Stroke Range up to 550 inches (14 m) Mates Virtually ANY Customer Supplied Encoder Factory Supplied Encoder Available
More informationD5100 Industrial Differential Pressure Transducer
FEATURES Heavy Industrial CE Approval (amplified only) As Low As ±0.1% Pressure Non Linearity Rugged Construction: Can Withstand 50g Shock/20g Vibration Up to -40 C to +125 C Operating Temperature Range
More informationM7100 Pressure Transducer
SPECIFICATIONS Performance standard on and off highway engine and vehicle OEMs Rugged for heavy equipment and outdoor use Designed specifically for high volume applications Stainless steel wetted surfaces
More informationMSP100 Pressure Transducer
SPECIFICATIONS Analog and 14-Bit Digital Output Small Size Low Cost 316L Stainless Steel or 17-4PH FEATURES Single Piece Construction; No Welds, No Oil 100% Stainless Steel Isolation for Harsh Chemical
More information85 Compensated SPECIFICATIONS. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated
SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature The 85 compensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged
More informationED-18 Analog Output Series Magnetic Encoder SPECIFICATIONS
ED-18 Analog Output Series Magnetic Encoder SPECIFICATIONS Analog voltage or current output Low profile IP52 sealing Sleeve or ball bearing Excellent stability no optic degradation The ED-18 Series Magnetic
More informationPT9101. General. Potentiometer Cycle Life 250,000 Maximum Retraction. Weight, Aluminum (Stainless 8 lbs. (16 lbs.) max. Electrical
Cable Actuated Sensor Absolute Linear Position to 550 inches (1400 cm) Aluminum or Stainless Steel Enclosure Options VLS Option to Prevent Free-Release Damage IP68 NEMA 6 Protection General Full Stroke
More information86 Compensated SPECIFICATIONS. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated
Compensated SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated The 86 compensated is a small profile, media compatible, piezoresistive silicon
More information316L SS Pressure Sensor High Pressure 0-100mV Output Absolute
SPECIFICATIONS 316L SS Pressure Sensor High Pressure 0-100mV Output Absolute The 89 uncompensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless
More informationPT9420 (Extended Range)
(Extended Range) Cable Actuated Sensor Absolute Linear Position to 1700 inches (4300 cm) Stroke Range Options: 0-600 to 0-1700 inches VLS Option to Prevent Free-Release Damage IP68 NEMA 6 Protection Hazardous
More informationMS1471 SPECIFICATIONS. PC Board Mountable Pressure Sensor 0-60 mv Output Gage and Absolute Low Cost
SPECIFICATIONS PC Board Mountable Pressure Sensor 0-60 mv Output Gage and Absolute Low Cost The MS1471 is a piezoresistive silicon pressure sensor packaged in a surface mount configuration. It is intended
More information86BSD Digital Output
SPECIFICATIONS Stainless steel with O-ring seal Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option 16mm diaphragm diameter The 86BSD is
More informationTESS WIRELESS SENSOR TAG DEMO V1.1
TESS WIRELESS SENSOR TAG DEMO V1.1 Standard 2.4GHz Wireless Communication Tag Humidity: 0-100% RH Temperature: -20 C to +85 C Pressure: 300 to 1,200mBar Applications Smart building Smart home HVAC controller
More informationFC22 Compression Load Cell
SPECIFICATIONS 10 100 lbf Ranges High Level or mv Outputs Interchangeable Compact Easy to Fixture Design CE Compliance FEATURES Small Size Low Noise Robust: High Over-Range Capability High Reliability
More informationD5100 Industrial Differential Pressure Transducer
SPECIFICATIONS 316L Stainless Steel Wetted Surface Voltage, Current, and mv Outputs True Wet/Wet Differential CE Certified (amplified version only) Variety of Pressure Ports and Electrical Connections
More informationU5600. Wireless Pressure Transducer SPECIFICATIONS
SPECIFICATIONS Enhanced Pressure Accuracy Digital 24-bit ADC Output, I 2 C Protocol Wireless Bluetooth 4.0 Connection CE Compliant with Variety of Pressure Ports Compact and Battery Powered [CR2050] Optional
More information86BSD Digital Output
SPECIFICATIONS Stainless steel with O-ring seal Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option 16mm diaphragm diameter The 86BSD is
More information86A SPECIFICATIONS. 316L SS Pressure Sensor Small Profile V High Level Output Gage, Absolute ASIC Calibrated
(Image displays Absolute type) 86A SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0.5-4.5V High Level Output Gage, Absolute ASIC Calibrated The 86A is a small profile, media compatible, piezoresistive
More informationDTS SERIES CONNECTORS
DEUTSCH DTS SERIES CONNECTORS FOR MIL-DTL-38999 SERIES III RUGGED, HARSH ENVIRONMENT SUBMINIATURE CONNECTORS TE DEUTSCH MIL-DTL-38999 SERIES III CONNECTORS QUICK REFERENCE GUIDE Wide Range Mil spec, commercial,
More information85 Uncompensated SPECIFICATIONS FEATURES APPLICATIONS STANDARD RANGES. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage
FEATURES Weldable and Threaded Process Fittings -40ºC to +125ºC Operating Temperature ±0.1% Pressure Non Linearity Solid State Reliability APPLICATIONS Medical Instruments Process Control Fresh & Waste
More informationCable Actuated Sensor Industrial User Scalable 4 20mA
Cable Actuated Sensor User Adjustable Stroke Range to 175 inches (3 meters) Easy Push-Button Zero and Span Adjust Designed for Outdoor & IP67 environments In Stock for Quick Delivery! 175-inch model shown
More informationMSP300 Pressure Transducer
SECIFICATIONS Analog Output or 14-Bit Digital ressure with 11-Bit Temperature Output One iece Stainless Steel Construction Low Cost 17-4H or 316L Stainless Steel Customizable FEATURES One iece Stainless
More informationMSP100 Pressure Transducer
SPECIFICATIONS Analog and 14-Bit Digital Output Available Small Size Low Cost 316L Stainless Steel or 17-4PH FEATURES Single Piece Construction; No Welds, No Oil 100% Stainless Steel Isolation for Harsh
More informationP125 High Pressure Sensor
High Pressure Sensor SPECIFICATIONS Ranges from 2000 to 7000 bar (30k to 100k psi) Stainless steel pressure port Robust for Fatigue testing For static and dynamic applications Linearity up to ±0.3% F.S.
More informationELAF LOAD CELL SPECIFICATIONS FEATURES
FEATURES Low Cost Optional High Level Output Small, Low Profile Design Low Noise Robust: High Over Range High Reliability Low Deflection Low Off-Axis Response APPLICATIONS Theatrical Rigging Loads Assembly
More informationMILITARY/AEROSPACE MARKETS INNOVATIVE SOLUTIONS GUIDE
MILITARY/AEROSPACE MARKETS INNOVATIVE SOLUTIONS GUIDE Solutions for Military/Aerospace Welcome to Sumitomo Electric Interconnect Products, Inc.. Since our inception in 1985, Sumitomo Electric Interconnect
More informationFIST-EDSA-D4. 3 Feeder cable/ducts (max 16 mm) 4 Drop cable (DB cable or guiding tubes 5-8 mm) 5 Adding drop cable. 6 Gel part replacement
FIST-EDSA I N S T A L L A T I O N I N S T R U C T I O N FIST-EDSA-D4 Content 1 Introduction 2 Kit content 3 Feeder cable/ducts (max 16 mm) 4 Drop cable (DB cable or guiding tubes 5-8 mm) 5 Adding drop
More information316L SS Pressure Sensor High Pressure 0-100mV Output Absolute
SPECIFICATIONS 316L SS Pressure Sensor High Pressure 0-100mV Output Absolute The 89 uncompensated is a small profile, media compatible, piezoresistive silicon pressure sensor packaged in a 316L stainless
More informationENERGY /// RAYCHEM CABLE CLAMPS RAYCHEM CABLE CLAMPS. Quick Reference Guide
ENERGY /// RAYCHEM CABLE CLAMPS RAYCHEM CABLE CLAMPS WHAT MAKES RAYCHEM CABLE CLAMPS THE INDUSTRY LEADER? Integral stainless steel clamping plates to ensure consistent clamping pressure on both sides.
More informationHTF3000LF PVH-3.3 TEMPERATURE AND HUMIDITY MODULE
TEMPERATURE AND HUMIDITY MODULE Compliant with RoHS recommendations Based on the rugged HS1101LF humidity sensor, HTF3000LF PVH-3.3 is a dedicated humidity and temperature transducer designed for OEM applications
More informationSPECIFICATIONS. SENSOR SOLUTIONS ///LM Page 1 09/2015
SPECIFICATIONS 316L SS Pressure Sensor with PVC Threads Small Profile 4.5V (typ) High Level Output Gage, Absolute, Sealed Gage ASIC Calibrated Variety of Cable Lengths The LM incorporates stainless steel
More informationTESS WIRELESS SENSOR TAG DEMO V1.1
TESS WIRELESS SENSOR TAG DEMO V1.1 Standard 2.4GHz Wireless Communication Tag Humidity: 0-100% RH Temperature: -20 C to +85 C Pressure: 300 to 1,200mBar ios, Android and Windows PC Compatible The sensor
More informationTS105-10L5.5MM Thermopile Sensor
SPECIFICATIONS Thermopile IR-Sensor For Contactless Temperature Measurement Single Element For Industrial Pyrometers Silicon Lens Accurate Reference Sensor Thermopiles are mainly used for contactless temperature
More informationCable Actuated Sensor Industrial User Scalable VDC Output
Cable Actuated Sensor Industrial User Scalable VDC Output User Signal Adjustable Stroke Range to 175 inches (3 meters) User Selectable 0 5, 0 10, 5 +5, 10 +10 VDC Output Designed for Outdoor & IP67 environments
More informationDOG2 MEMS SERIES CAN J1939 INCLINOMETER
DOG2 MEMS SERIES CAN J1939 INCLINOMETER SPECIFICATIONS Dual axis inclinometer Measurement ranges ±90 CAN J1939 interface FEATURES 8 30 VDC supply voltage Digital signal processing includes o filter (e.g.
More informationDOG2 MEMS SERIES USB INCLINOMETER
1 DOG2-USB_1630-21559-0018-E-0118 DOG2 MEMS SERIES USB INCLINOMETER SPECIFICATIONS Dual axis inclinometer Measurement range ±90 High resolution Good accuracy Fast response time Easy to use software FEATURES
More information89BSD Digital Output
SPECIFICATIONS Stainless Steel with O-Ring Seal Pressure/Temperature Read-Out (24-bit DS ADC) ASIC Calibrated Absolute, Sealed Gage 9mm Diameter The 89BSD is a 9mm diameter small profile, media compatible,
More information86 Compensated SPECIFICATIONS. 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated
Compensated SPECIFICATIONS 316L SS Pressure Sensor Small Profile 0-100mV Output Absolute and Gage Temperature Compensated The 86 compensated is a small profile, media compatible, piezoresistive silicon
More informationDATASHEET PolySwitch RKEF Devices
DTSHEET PolySwitch Devices For use in a wide variety of general electronic products, ranging from industrial controls to battery packs, PolySwitch devices are functionally equivalent to the PolySwitch
More informationFC23 Compression Load Cell
SPECIFICATIONS 50 2000 lbf Ranges High Level or mv Interchangeable Compact Load Button Design Industry Standard Packaging CE Compliance FEATURES Interchangeable Low Noise Robust: High Over-Range Capability
More informationSeal Kits for BUDI Enclosures
Description BUDI is a product range of compact, wall mountable fiber enclosures for indoor and outdoor use. They are specifically designed for fast deployment and easy customer connection. The FIST management
More informationMEAS EMITTER ASSEMBLY ELM-4000 SERIES
MEAS EMITTER ASSEMBLY ELM-4000 SERIES SpO2 optical sensor component Dual Drive Lead Frame Construction Pulse Oximetry Component Clear Epoxy Low oxygen level can put a strain on cell functioning including
More informationMODEL 4000A & 4001A ACCELEROMETER
MODEL 4000A & 4001A ACCELEROMETER dimensions 4001A Connector Attachment SPECIFICATIONS Silicone MEMS Accelerometer Signal Conditioned Output Temperature Calibrated Low Cost, Lightweight The Model 4000A
More informationHM1520LF Relative Humidity Module
SPECIFICATIONS Tubular form for through wall mounting Product free from Lead, Cr(6+), Cd and Hg Calibrated, linear voltage for easy electronic interface Typical 1 to 1.6 Volt DC output for 0 to 20% RH
More informationHM1500LF Relative Humidity Module
SPECIFICATIONS Small size product Product free from Lead, Cr(6+), Cd and Hg Humidity calibrated within +/-2% @55%RH Typical 1 to 3.6 Volt DC output for 0 to 100% RH at 5Vdc supply Ratiometric to voltage
More information86BSD Digital Output
SPECIFICATIONS Stainless steel with O-ring seal Pressure/temperature read-out Digital output ASIC calibrated Absolute, gage Cable/connector option Low power option 16mm diaphragm diameter The 86BSD is
More informationMS4525 SPECIFICATIONS
SPECIFICATIONS PCB Mounted Pressure Transducers Amplified Ratiometric Analog Output Differential, Gage, Absolute, Compound, & Vacuum Temperature Compensated 3.3 or 5.0 V DC Supply Voltage The MS4525 is
More informationLMM-H04 Mass Air FLow Sensor
Mass Air FLow Sensor Product Description LMM-H04 is a thermodynamic sensing element for the unidirectional measurement of mass air flow in a well defined channel. It is dedicated for applications with
More informationMS4525DO SPECIFICATIONS FEATURES APPLICATIONS
FEATURES PSI Pressure Ranges PCB Mountable Digital Output Barbed Pressure Ports APPLICATIONS Blocked Filter Detection Altitude and Airspeed Measurements Medical Instruments Fire Suppression System Panel
More informationU86B. Urea Dosing SPECIFICATIONS FEATURES APPLICATIONS
SPECIFICATIONS Mountable with O-ring seal Stainless Steel wetted surfaces Amplified ASIC calibrated Absolute, sealed gage Cable option Analog output SENT Output Optional (contact factory for details) FEATURES
More informationSUBMERSIBLE Flush Diaphragm Liquid Level Sensor AST4520
Flush Diaphragm Liquid Level Sensor AST4520 Overview The AST4520 Flush Submersible liquid level sensor is the cost effective solution for level monitoring of turbulent tanks with viscous media. Approved
More informationINTRINSICALLY SAFE Pressure Transducer / Transmitter AST4401
Pressure Transducer / Transmitter AST4401 Overview The AST4401 is a stainless steel pressure transducer with a wide variety of options. With its rugged construction and best price-toperformance ratio in
More informationLMM-H03 Mass Air FLow Sensor
Mass Air FLow Sensor Product Description LMM-H03 is a thermodynamic sensing element for the bidirectional measurement of mass air flow in a well defined channel. It is dedicated for applications with high
More informationOutdoor Furniture STOP. IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.),
Outdoor Furniture STOP IMPORTANT If you have any problems with this product (missing or damaged parts, assembly issues, etc.), PLEASE DO NOT RETURN TO THE RETAILER/STORE from where you purchased the product.
More informationThe Importance of Pressure Sensors in HVACR Systems
The Importance of Pressure Sensors in HVACR Systems How TE Connectivity s (TE) M3200 Meets New Performance Standards It s Simple, Reliable, Robust By Devin Brock, Manager for Product Knowledge and Training,
More informationSpecification Status: Released
PGE NO.: 1 OF 5 PIN CONFIGURTION ND DESCRIPTION: Specification Status: Released Pin Configuration (Bottom View of ) (Top View of ) 2 хххх C (Side View of ) Note: 2 is product code хххх is Batch Code P1
More informationU5300 Industrial Pressure Transducer
FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.1% Accuracy ±0.5% Total Error Band Compact Outline -40 C to +125 C
More informationSpecification Status: Released
PAGE NO.: 1 OF 5 Specification Status: Released PIN CONFIGURATION AND DESCRIPTION: D2 хххх Note: D2 is product code xxxx is Batch code P1 Pth P Arm TABLE 1. DIMENSIONS: A B C D E MIN MAX MIN MAX MIN MAX
More informationLOW PRESSURE Intrinsically Safe Transducer AST44LP
Intrinsically Safe Transducer AST44LP Overview The AST44LP is a stainless steel pressure transducer with a wide variety of options. With its rugged construction and the best price-toperformance ratio in
More informationCMZH Low Smoke 0-Halogen Flame- Retardant Mass Transit Tag
STANDARD COLOR CMZH Low Smoke 0-Halogen Flame- Retardant Mass Transit Tag TECHNICAL DATA SHEET Revision Number. 1 Last Edited 9. januar 2019 OTHER COLORS MATERIAL Flat band cross linked polyolefin. OPERATING
More information15203B 25203B 35203B Uniaxial Biaxia Triaxial
Uniaxial Biaxia Triaxial SPECIFICATIONS Digital Accelerometers User Configurable ±1 g to ±15 g Inertial Measurements Made Fast and Easy FEATURES AND BENEFITS User Configurable Settings The analog/digital
More informationBowthorpe EMP surge arrester Distribution metal oxide surge arrester DA0 Series, (IEC)
Energy Division Bowthorpe EMP surge arrester Distribution metal oxide surge arrester DA0 Series, (IEC) Bowthorpe EMP distribution metal oxide surge arrester DA0 series Tyco Electronics Bowthorpe EMP business
More informationMEAS Subermsible Liquid Level Pressure Transducer SPECIFICATIONS. Features. Applications
MEAS 5700 Subermsible Liquid Level Pressure Transducer Features Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output ±0.25% Accuracy
More informationNTC THERMISTOR SENSOR PERFORMANCE
NTC THERMISTOR SENSOR PERFORMANCE Accuracy, Interchangeability, Beta Tolerance, Tolerance Comparison, Stability, Drift, and Moisture Induced Failure When designing the best temperature probe for a specific
More informationCABLES AND ACCESSORIES FOR TRUBLUE DATA LOGGERS
CABLES AND ACCESSORIES FOR TRUBLUE DATA LOGGERS CONTENTS TruBlue Cable Attachment System 2 Field Cables for Vented Gage Water Level Data Loggers 853-XXXXX, Interface Cable Assembly 3 Field Cables for Absolute
More informationM5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof UL Certified Gage, Sealed, Compound
More informationOPERATION MANUAL Model 8011 & mA
OPERATION MANUAL Model 8011 & 8021 4-20mA TE CONNECTIVITY SENSORS/// MODEL 8011 & 8021 4-20MA 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year
More informationOPERATION MANUAL MODEL & ACCELEROMETER
OPERATION MANUAL MODEL 8011-01 & 8021-01 ACCELEROMETER TE CONNECTIVITY SENSORS///MODEL 8011-01 & 8021-01 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted
More informationM5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations FEATURES CE Compliance Reverse Polarity Protection
More informationOPERATION MANUAL MODEL 4610 ACCELEROMETER
OPERATION MANUAL MODEL 4610 ACCELEROMETER TE CONNECTIVITY SENSORS///MODEL 4610 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year
More informationZH Low Smoke 0-Halogen Flameretardant Identification Sleeves
STANDARD TUBE COLOR ZH Low Smoke 0-Halogen Flameretardant Identification Sleeves TECHNICAL DATA SHEET Revision Number. 1 Last Edited 24. juli 2018 The ZH-2X Heat Shrinkable Wire Markers are made of halogen
More informationINTRINSICALLY SAFE Pressure Transducer / Transmitter AST4400
Pressure Transducer / Transmitter AST4400 Overview The AST4400 is a stainless steel pressure transducer with a wide variety of options. With its rugged construction and best price-toperformance ratio in
More informationA world of fiber Product overview
A world of fiber Product overview Solutions for fiber optic networks Solutions for fiber optic networks Drawing on years of experience and expertise in materials science technology, optics, product design
More informationOPERATION MANUAL MODEL 805 ACCELEROMETER
OPERATION MANUAL MODEL 805 ACCELEROMETER TE CONNECTIVITY SENSORS /// MODEL 805 ACCELEROMETER 05/2016 Page 1 WARRANTY Measurement Specialties, Inc. accelerometers are warranted during a period of one year
More informationMEAS PICTAIL PLUS FOR MICROCHIP EXPLORER 16
FOR MICROCHIP EXPLORER 16 SENSOR SOLUTIONS /// MEAS PICTAIL PLUS 08/2016 Page 1 Microchip Explorer 16 Board Setup PIM used for the sample code is PIC24FJ128GA010. SENSOR SOLUTIONS /// MEAS PICTAIL PLUS
More informationU5700 Submersible Liquid Level Pressure Transducer
SPECIFICATIONS High Accuracy CE Compliant and Waterproof UL Certified Variety of Pressure Port Configurations Waterproof Optional Stainless Steel Snubber IP68 Rated Connection and Submersible Polyurethane
More informationMODEL ACCELEROMETER
MODEL 8711-01 ACCELEROMETER SPECIFICATIONS Industrial IEPE Accelerometer Low Cost, Quick Delivery -55 C to +125 C Operating Range Top Exit Connector DIMENSIONS The Model 8711-01 are internally shielded
More informationSpecification Status: Released
PAGE NO.: 1 OF 8 Specification Status: Released Not to be used for new designs. For new design please contact Tyco Electronics Sales BENEFITS Board space savings Help protect sensitive electronic circuits
More informationDSF xx15.xx xhv Ex-Atex Ex-Atex Certified Two wire Hall Effect Speed Sensor
DSF xx15.xx xhv Ex-Atex Product ID Type # Product # Drawing # DSF 1215.01 SHV Ex-atex (5m) 304Z-05197 113216 DSF 1415.01 AHV Ex-atex S148 304Z-05256 113351 DSF 1615.01 SHV Ex-atex (5m) 304Z-05196 113214
More information