DETAIL OF NOTIFICATION SCOP. GSO Technical Regulation. GCC Technical Regulation on Children Toys BD

10.6 Schedule of Accreditation

Accreditation Manager: Testing Laboratory Accreditation No. ATL0029 is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, General requirements for the

NB VDE Testing and Certification Institute. Schedule of Notification

Locations where notification activities covered: Address: MerianStrasse 28, 63069 Offenbach, Germany Contact: Mr Wolfgang NIEDZIELLA Tel: +49 69 8306-0 Fax: +49 69 8306-555 Email: vde-institute@vde.com

... II.. s:. U".!.! 0 I a'.! n) '4-!J..SZ.ll ~~ Jq~ (Jql.sii.JI u l?o Jq~ GCC Standardization Organization. Designation of a Notified Body

.... II.. s:. U".!.! 0 I a'.! n) '4-!J..SZ.ll ~~ Jq~ (Jql.sii.JI u l?o Jq~ GCC Standardization Organization Designation of a Notified Body The GCC Standardization Organization (GSO) hereby affirms that

... II.. s::. U II!.! 0 I Q I! n) ~}.St.ll ~I Jq~ (Jql.siLII U" I? o Jq~ GCC Standardization Organization. Designation of a Notified Body

... II.. s::. U II!.! 0 I Q I! n) ~}.St.ll ~I Jq~ (Jql.siLII U" I? o Jq~ GCC Standardization Organization Designation of a Notified Body The GCC Standardization Organization (GSO) hereby affirms that Bureau

DETAIL OF NOTIFICATION SCOPE GSO Technical Regulation. Gulf Technical Regulation for Low Voltage Electrical Equipment and Appliances (BD )).

Locations where notification activities covered: Address: 10, Chungui-ro, Jinju-si, Gyeongsangnam-do, 52852, Rep. of KOREA Contact: Lee Won Bok Telephone: +82 2 860 1306 Facsimile: +82 2 860 1339 Email:

Test Report. No. NGBHG Date: 15 Nov 2016 Page 1 of 8

Test Report. No. NGBHG1605019202 Date: 15 Nov 2016 Page 1 of 8 MID OCEAN HONG KONG LIMITED UNIT 201, 2/F.,LAFORD CENTRE, 838 LAI CHI KOK ROAD, CHEUNG SHA WAN,KOWLOOM, HONGKONG The following sample(s) was/were

NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES

Official Journal of the European Union C 181 English edition Information and Notices Volume 57 13 June 2014 Contents IV Notices NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES European

10.6 Schedule of Accreditation

Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying

10.6 Schedule of Accreditation

Accreditation Manager: Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements

TEST REPORT Page 1 of 28. Uçar Oyuncak San.ve Tic.Ltd.Şti.

TEST REPORT Page 1 of 28 REPORT NUMBER : TURT120014744-REVISED 04 APPLICANT NAME ADDRESS BUYER Uçar Oyuncak San.ve Tic.Ltd.Şti. Hadımköy Ömerli Mah.İstanbul Yolu Cad. No:195 Arnavutköy İstanbul TÜRKİYE

10.6 Schedule of Accreditation

Accreditation Manager: Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements

G-Marking Low Voltage Electrical Equipment & Appliances. GCC-GSO Conformity Assessment Scheme (RCAS)

G-Marking Low Voltage Electrical Equipment & Appliances GCC-GSO Conformity Assessment Scheme (RCAS) 1 Agenda TOPIC G-Marking Scheme Overview G-Marking Now and Post July 2016 Affected Products, Standards,

10.6 Schedule of Accreditation

Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories

CHINA DRAGON Inspection & Certification (H.K.) Ltd.

2nd Floor, Block A, 50 Fuk HI Street, Yuen Long, N.T., Hong Kong. Tel: 2675 0606 Fax: 2675 9737 Http:llwww.cdlchk.com E-mail: enquiry@cdichk.com Test Report No. SC28161 Monday Beauty Ltd 3613-3616, 3ttff,

10.17 Scope of Accreditation

Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various

Proposed standards for Chinese national adoption

Proposed standards for Chinese national adoption 1. Toys BS EN 71 *BS EN 71-1:2011+A3:2014 Safety of toys. Mechanical and physical properties (work in hand) BS EN 71-2:2011+A1:2014 Safety of toys. Flammability

10.6 Schedule of Accreditation

Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various

Product Technology Service (Ningbo) Co., Ltd. 6&7F, 59#, Huayu Road, Yinzhou District, Nlngbo P.R. China

Test Report Page 1 of 7 Testing institute Applicant Product name Item No. SKU NO Sample receive date Completes date (Ningbo) Co., Ltd. 6&7F, 59#, Huayu Road, Yinzhou District, Nlngbo 315192 P.R. China

CE marking & your legal obligations

CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment

10.6 Schedule of Accreditation

Product Certification Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment -- Requirements for bodies certifying

UIDE EU TOY SAFETY DIRECTIVE 2009/48/EC

REFERENCE GUIDE EU TOY SAFETY DIRECTIVE 2009/48/EC This guide is provided to help UL-STR s clients gain a greater understanding of the complex requirements of this updated directive and to assist in their

SGMA & Bureau Veritas

SGMA & Bureau Veritas Product Integrity Program August 18, 2011 1 Confidentiality BUREAU VERITAS PROPRIETARY Copyright Bureau Veritas 2011 DO NOT DISCLOSE OUTSIDE YOUR ORGANIZATION WITHOUT BUREAU VERITAS

This document is a preview generated by EVS

TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15071 August 2015 ICS 97.200.50 Supersedes CEN/TR 15071:2014 English Version Safety of toys - National translations of warnings and instructions

BTHA List of Safety Standards that may be applicable to Toys

BTHA List of Safety Standards that may be applicable to Toys BS / EN / ISO / CEN Standard Number Description Updated 08/07/2017 Toy Safety BS EN 62115:2005 + A11: 2012 Safety of Toys. Electrical Toys -

Record of Amendments. Version Date Amendment Section/page affected

Industry support for effective compliance BTHA Guidance on The Restriction Of The Use Of Certain Hazardous Substances In Electrical and Electronic Equipment (recast) (RoHS) Directive 2011/65/EU Comparison

TEST REPORT: No. CRSSA/ CA00871

TEST REPORT No. CRSSA/190102097CA00871 REPORTED DATE 09/01/2019 Job Ref. CRS/20181225006 TORAY PLASTICS (M) SDN BHD 2628, MK.1, SPT., LORONG PERUSAHAAN 4, PRAI FREE INDUSTRIAL ZONE, 13600 PRAI, PENANG

The UAE RoHS regulation covers all EEE (Electrical and Electronic Equipment) as detailed in Table 1.

Date: 28-November-2017 Version: 2.0 Title: UAE RoHS - Implementation Guidelines Reference(s): -- Remarks: This document provides guiding principles for the implementation of the UAE RoHS Restriction of

This document is a preview generated by EVS

TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15071 August 2014 ICS 97.200.50 Supersedes CEN/TR 15071:2005 English Version Safety of toys - National translations of warnings and instructions

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 31 Kingsland Grange Woolston Warrington Cheshire WA1 4RW Contact: Miss K L Marrow Tel: +44 (0)1925 854360 Fax: +44 (0)1925 851654 E-Mail:

SUNON SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : EC AXIAL Fan DIMENSIONS : 120 X 120 X 38 mm M O D E L : CF4113LBL-000U-AA9 SPEC. NO. : A12010180G-00 CUSTOMER APPROVAL NO. : APPROVED BY CUSTOMER : (AUTHORIZED)

International standards used locally worldwide ISO/TC 67

/ International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Building 63 Haslar Marine Technology Park Haslar Road Gosport Hampshire PO12 2AG Contact: Mr S Kumar Tel: +44 (0) 208 692 5050 Fax: +44 (0)

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK to provide product conformity Stocking Lane High Wycombe Buckinghamshire HP14 4ND Contact: Mr Alan Gower Tel: +44 (0)1494 569700 Fax: +44

This document is a preview generated by EVS

EESTI STANDARD EVS-EN 71-11:2005 Mänguasjade ohutus. Osa 11: Orgaanilised keemilised ühendid. Analüüsimeetodid Safety of toys - Part 11: Organic chemical compounds - Methods of analysis EESTI STANDARDIKESKUS

BTHA List of Safety Standards that may be applicable to Toys Updated 25/07/2018

BTHA List of Safety Standards that may be applicable to Toys Standard Number Description Updated 25/07/2018 Toy Safety BS EN 62115:2005 + A11: 2012 Safety of Toys. Electrical Toys - Safety BS EN71-1: 2014+A1:

E-waste Management in the Arab Region: Status and Opportunities

E-waste Management in the Arab Region: Status and Opportunities Hossam Allam, Ph.D. Regional Programme Manager Strategic Concerns Programme Centre for Environment and Development for the Arab Region and

CEN standardization work on refrigerating systems, especially standard EN 378

CEN standardization work on refrigerating systems, especially standard EN 378 Carsten Hoch Head of Refrigeration TÜV SÜD Industrie Service GmbH Ridlerstrasse 65, 80339 Munich carsten.hoch@tuev-sued.de

Corporate Presentation. 14 June 2009

Corporate Presentation 14 June 2009 History 1979 - Ducab was formed as a joint venture between Government of Dubai and BICC Group of the UK History Quality Systems & Certification Awards 2001 Ducab jointly

Human-Oriented Medical Laser Company. ELESYS Company introduction

Human-Oriented Medical Laser Company ELESYS Company introduction CONTENTS I. About Elesys Mission Organization chart History II. Products Co2 laser system Co2 fractional laser system 808 diode laser system

SUNON SPECIFICATION FOR APPROVAL

SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION DIMENSIONS M O D E L P/N SUNON SPEC. NO. CUSTOMER APPROVAL NO. APPROVED BY CUSTOMER (AUTHORIZED) : AXIAL AC FAN : 120X120X38 mm : DP200A : 2123XST.GN :

SUNON SPECIFICATION FOR APPROVAL. CUSTOMER : DESCRIPTION : AC BLOWER DIMENSIONS : 120X120X31 mm M O D E L : AB2123-HST P/N : GN

SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : AC BLOWER DIMENSIONS : 120X120X31 mm M O D E L : AB2123-HST P/N : GN SUNON SPEC. NO. : A12004440G-00 APPROVAL NO. : APPROVED BY : (AUTHORIZED) SPEC.NO

GSO Certification. The key to successful home appliance sales in the Gulf region.

GSO Certification The key to successful home appliance sales in the Gulf region. www.tuv.com Contents OVERVIEW GSO FAST FACTS UNDERSTANDING REGIONAL CONFORMITY 05 Looking at lists 05 Roles & responsibilities

SUNON SPECIFICATION FOR APPROVAL

D.C.C. SPECIFICATION FOR APPROVAL CUSTOMER : Sunon Inc. MOTOR TYPE : DESCRIPTION : MagLev Motor Fan DIMENSIONS : 17X17X3 mm M O D E L : UF3H3-710 SPEC. NO. : D01001880F-01 CUSTOMER APPROVAL NO. APPROVED

Safety of toys - Part 5: Chemical toys (sets) other than experimental sets

Irish Standard Safety of toys - Part 5: Chemical toys (sets) other than experimental sets CEN 2015 No copying without NSAI permission except as permitted by copyright law. Incorporating amendments/corrigenda/national

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Presley House Presley Way Crownhill Milton Keynes MK8 0ES United Kingdom Contact: Jeremy Hodge Tel: +44 (0) 1908 267300 Fax: +44 (0) 1908

AS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017

AS/NZS 62560:2017 (IEC 62560, Ed. 1.1:2015, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications Superseding AS/NZS IEC 62560:2014

Additional deviations may possibly be found if a complete type test is carried out on the product.

Diary No. 13EV4171 Reference No 1315333 MARKET SURVEILLANCE TEST REPORT - LVD The tests cover parts of the requirements for AC adapter stated in the standard SS-EN 60950: 2006 + A11 + A1 + A12 and EN 50075.

SUNON SPECIFICATION FOR APPROVAL

SUNON SPECIFICATION FOR APPROVAL CUSTOMER : RS COMPONENTS LTD DESCRIPTION : DC BRUSHLESS BLOWER DIMENSIONS : 120X120X32 mm M O D E L : PMB4812PLB3-A P/N : (2).GN SUNON SPEC. NO. : D12025330G-01 CUSTOMER

Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.

Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Units 41 & 43 The Listerhills Park of Science and Commerce Campus Road Bradford BD7 1HR Contact: Ms J Pinkess Tel: +44 (0)1274 303080 Fax:

WTO/TBT Monthly Notification Bulletin (November 2009)

WTO/TBT Monthly Notification Bulletin (November ) Rwanda Bureau of Standards/Office Rwandais de Normalisation P.O.BOX: 7099 Tel: +250 252 586103/ 252 582945 Fax : +250 252 583305 E-mail : info@rbs.org.rw

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:

SVENSK STANDARD SS-EN 71-9:2005 Fastställd 2005-07-14 Utgåva 1 Leksaker Säkerhetsregler Del 9: Organiska kemikalier Krav Safety of toys Part 9: Organic chemical compounds Requirements ICS 97.200.50 Språk:

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD ISO 15027-3 Second edition 2012-11-01 Immersion suits Part 3: Test methods Combinaisons de protection thermique en cas d immersion Partie 3: Méthodes d essai Reference number ISO

Historic and classic colours. An exclusive collection

Historic and classic colours An exclusive Historic and classic colours Hempel has been a world leading coatings supplier since 1915 for the decorative, protective, marine, container and yacht markets.

MARKING EC Directive 97/23 PED (Pressure Equipment Directive)

MARKING EC Directive 97/23 PED (Pressure Equipment Directive) Field of application The Directive applies to the design, manufacturing and conformity assessment of the pressure equipment and of their groups

PLASTICIZER RETENTION IN PVC GEOMEMBRANES

PLASTICIZER RETENTION IN PVC GEOMEMBRANES T. D. Stark 1, H. Choi 2, and P. W. Diebel 3 1 Department of Civil and Environmental Engineering, The University of Illinois, 2217 NCEL, 205 N. Mathews Ave., Urbana,

STATE NON-FOOD PRODUCTS INSPECTORATE UNDER THE MINISTRY OF THE ECONOMY

Ref. Ares(2015)302157-26/01/2015 STATE NON-FOOD PRODUCTS INSPECTORATE UNDER THE MINISTRY OF THE ECONOMY Budgetary institution, Gedimino Ave. 38, LT-01104 Vilnius, telephone: 8 706 64 950, fax: 8 706 64

Declaration of Conformity Declaration of Performance Notes

What difference is there in the information to be included in the Declaration of Performance under the CPR (as updated by Delegated Act (EU) No. 574/2014) from that currently provided in the Declaration

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SIRA Certification Service Accredited to ISO/IEC 17065:2012 to provide product conformity Unit 6 Hawarden Industrial Park Hawarden Deeside

CRA24-B3 controlled residential ventilation

controlled residential ventilation Table of contents Overview of controlled residential ventilation 3 Damper control for a balanced air volume 4 VAV control system for a defined room temperature 7 Complete

AS/NZS/ISO 817 and AS/NZS REFRIGERATION IMPACTS

AS/NZS/ISO 817 and AS/NZS5149.1-4 REFRIGERATION IMPACTS Ben Adamson F.AIRAH, F.IEAUST, M.ASHRAE, M.IIAR Managing Director, Refrigeration Engineering International Refrigeration Standards Update Safety

Operation Manual Part-No

Version 2.2, 08/2016 VISATRON Remote Indicator II For Oil Mist Detectors Operation Manual Part-No. 180050 VNxxx/87plus VNxxx/93 VNxxx/87-EMC VN115/87plus EX VN301plus (EX) Part-No. 150998 Page 2 of 20

AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment

AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment AS/NZS 3820:2009 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee

PROFILE. since YEARS DESIGN CONSULTING MANUFACTURING SUPPLY INSTALLATION TESTING COMMISSIONING MAINTENANCE REFURBISHMENT

DESIGN CONSULTING MANUFACTURING SUPPLY INSTALLATION TESTING COMMISSIONING MAINTENANCE REFURBISHMENT PROFILE 2017 Don t Compromise on Fire Safety Choose Certified Quality Products SFFECO 33 since YEARS

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6

Applicant: Y. Lin Electronics Co., Ltd. No. 3 Xinguang Road, Jinhe The third Industrial Zone, Zhangmutou Town, Dongguan,. Guangdong, China. Number: Date: 11 Feb 2015 15020100HKG-001 Sample Description

Evaporative Cooling Applicability in the Middle East

Evaporative Cooling Applicability in the Middle East Oxycom Fresh Air BV April 14th, 215 Abstract Oxycom developed various evaporative cooling solutions, either as standalone configurations or as combinations

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD ISO 6330 Third edition 2012-04-15 Textiles Domestic washing and drying procedures for textile testing Textiles Méthodes de lavage et de séchage domestiques en vue des essais des

GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO., LTD

中国认可国际互认检测 TESTING CNAS L1744 GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO., LTD Date Received: Jun 20, 2016 Page 1 of 5 GUANGDONG XINYU TECHNOLOGY INDUSTRIAL CO., LTD LAIMEI INDUSTRIAL ZONE, CHENGHAI DISTRICT,

C6 Premium. C6 Premium Copper Systems from Infinique is premium performing Class E / Category 6 Data Communication

Stable and Reliable Data Communication Solutions from Infinique Infinique provides high quality end-to-end solutions for communication infrastructure that bring great value to its customers. We have achieved

Fire-Resistant. Automatic Doors

Fire-Resistant Automatic Doors 1 2 Automatic fire- resistant door. Hotel sector. Created in 1966, Manusa is a leading company in the market of automatic doors thanks to the development of its own technology

ISO Safety of machinery Laser processing machines Part 1: General safety requirements

INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions

AS/NZS :2015

AS/NZS 60598.2.10:2015 (IEC 60598.2.10, Ed.2.0:2003, MOD) Australian/New Zealand Standard Luminaires Part 2.10: Particular requirements Portable luminaires for children Superseding AS/NZS 60598.2.10:1998

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Product Test Centre 15 Progress Road Eastwood Leigh-on-Sea Essex SS9 5JA Contact: Mr S Bailey Tel: +44 (0)1702 425738 E-Mail: stuart.bailey@honeywell.com

SPECIFICATION FOR APPROVAL

SUNON SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION DIMENSIONS M O D E L SUNON SPEC. NO. CUSTOMER APPROVAL NO. APPROVED BY CUSTOMER (AUTHORIZED) : DC BRUSHLESS FAN : 92X92X25 mm : PF92251B1-000U-S99

ISO 3758 INTERNATIONAL STANDARD. Textiles Care labelling code using symbols. Textiles Code d'étiquetage d'entretien au moyen de symboles

INTERNATIONAL STANDARD ISO 3758 Third edition 2012-04-01 Textiles Care labelling code using symbols Textiles Code d'étiquetage d'entretien au moyen de symboles Reference number ISO 2012 Provläsningsexemplar

AS/NZS IEC :2013

AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED

SUNON SPECIFICATION FOR APPROVAL. ISSUE DATE Jeff

SUNON SPECIFICATION FOR APPROVAL CUSTOMER : MOTOR TYPE DESCRIPTION DIMENSIONS M O D E L SUNON SPEC. NO. CUSTOMER APPROVAL NO. APPROVED BY CUSTOMER (AUTHORIZED) : : MagLev Motor Fan : 40X40X10 mm : MB40100V2-000U-A99

SUNON SPECIFICATION FOR APPROVAL : MF50152V1-1000U-A99 SUNON SPEC. NO. : D G-00 CUSTOMER APPROVAL NO. APPROVED BY CUSTOMER.

SUNON SPECIFICATION FOR APPROVAL CUSTOMER : MOTOR TYPE DESCRIPTION DIMENSIONS M O D E L : : MagLev Motor Fan : 50X50X15 mm : MF50152V1-1000U-A99 SUNON SPEC. NO. : D05061880G-00 CUSTOMER APPROVAL NO. APPROVED

Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6

Applicant: Y. Lin Electronics Co., Ltd. No. 3 Xinguang Road, Jinhe The third Industrial Zone, Zhangmutou Town, Dongguan,. Guangdong, China. Number: Date: 11 Feb 2015 15020097HKG-001 Sample Description

ATEX - GUIDE. A short introduction to ATEX Terminology. Equipment for use in flammable atmospheres C E R T I F I E D DANISH TECHNOLOGICAL INSTITUTE

DANISH TECHNOLOGICAL INSTITUTE The Danish Technological Institute is a self-owned and not-f-profit institution. We develop, apply and disseminate research- and technologically-based knowledge f the Danish

Growth opportunities in Asia Pacific and the Middle East. January 2009

Growth opportunities in Asia Pacific and the Middle East January 2009 Nick Buckles Chief Executive Officer Agenda G4S overview Asia Pacific and Middle East security markets overview G4S in Asia Pacific

AIR CONDITIONERS MINIMUM ENERGY PERFORMANCE, LABELLING AND TESTING REQUIREMENTS FOR LOW CAPACITY WINDOW TYPE AND SINGLE-SPLIT

SAUDI ARABIAN STANDARD SASO 2663/2017 والجودة الھيئة السعودية للمواصفات والمقاييس Saudi Standards, Metrology and Quality Org (SASO) SASO 2663:2017 (Draft) AIR CONDITIONERS MINIMUM ENERGY PERFORMANCE, LABELLING

ISO 7779 INTERNATIONAL STANDARD. Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment

INTERNATIONAL STANDARD ISO 7779 Third edition 2010-08-15 Acoustics Measurement of airborne noise emitted by information technology and telecommunications equipment Acoustique Mesurage du bruit aérien émis

Regulation (EC) 1272/2008 on Classification, labelling and packaging. (CLP Regulation) DG Environment

Regulation (EC) 1272/2008 on Classification, labelling and packaging of substances and mixtures (CLP Regulation) DG Environment GHS Global Context Rio, 1992 Chapter 19 of UNCED Agenda 21 Development by

RETAIL TRADE AS AN ACTOR IN BALANCED SPATIAL PLANNING AND SUSTAINABLE DEVELOPMENT

AS AN ACTOR IN BALANCED SPATIAL PLANNING AND SUSTAINABLE DEVELOPMENT OVERVIEW OF THE CARREFOUR GROUP Gerard Castrie, Marketing director of Carrefour (France) 1 Discover the Carrefour group The Carrefour

TEST REPORT IEC Safety of laser products - Part 1: Equipment classification and requirements

SHENZHEN LCS COMLIANCE TESTING LABORATORY LTD REORT NO.: LCS1611293204S TEST REORT Safety of laser products - art 1: Equipment classification and requirements Report Number.... : LCS1611293204S Date of

Introduction PoolPak International Started in1986 We Make Dehumidification Systems for Indoor Swimming Pools. Product is Spin Off from York Internatio

A Small Company s Foray into International Marketing Fifth University of Delaware, Mechanical Engineering Alumni Career Celebration April 25, 2008 Patrick J. Reynolds Introduction PoolPak International

Low Voltage Catalogue_Final ai 11/8/09 11:37:27 AM BICC 1 BICC Final Brochure-NEW.indd 1 7/5/10 3:02 PM

1 2 INTRODUCTION Established in 1979, Ducab is the leading cable manufacturing company in the region and is equally owned by the Governments of Dubai and Abu Dhabi. Ducab has three major manufacturing

TABLE OF CONTENTS Part 6 Legal Basis for Fire Safety Planning... 2

TABLE OF CONTENTS Part 6 Legal Basis for Fire Safety Planning... 2 6.1] GENERAL... 2 6.2] EXCERPTS FROM 2012 BC FIRE CODE PART 2 BUILDING AND OCCUPANT FIRE SAFETY... 3 6.3] EXCERPTS FROM 2012 BC FIRE CODE

SPECIFICATION FOR APPROVAL

SUNON SPECIFICATION FOR APPROVAL CUSTOMER : MOTOR TYPE DESCRIPTION DIMENSIONS M O D E L SUNON SPEC. NO. CUSTOMER APPROVAL NO. APPROVED BY CUSTOMER (AUTHORIZED) : : MagLev Motor Fan : 40X40X20 mm : MF40201VX-1000U-G99

Title. Rev. 3 of 09/04/2018. Revision and date entry into force. PR.PART. PRD/GMARK Rev. 3 of 09/04/2018 Page 1 di 36 Mod. 3268/1

Title SPECIAL REQUIREMENTS FOR THE ISSUING OF GULF-TYPE EXAMINATION CERTIFICATES IN THE FRAME OF THE STANDARDIZATION ORGANIZATION FOR THE COOPERATION COUNCIL FOR THE ARAB STATES OF THE GULF (GSO) Reference

ISO Textiles Domestic washing and drying procedures for textile testing

INTERNATIONAL STANDARD ISO 6330 Third edition 2012-04-15 Textiles Domestic washing and drying procedures for textile testing Textiles Méthodes de lavage et de séchage domestiques en vue des essais des

Re: ENSC 405W Requirements Specifications for a Voice Controlled Lighting System

February 20, 2017 Dr. Steve Whitmore School of Engineering Science Simon Fraser University Burnaby, British Columbia V5A 1S6 Re: ENSC 405W Requirements Specifications for a Voice Controlled Lighting System

ISO INTERNATIONAL STANDARD. Safety of machinery Laser processing machines Part 1: General safety requirements

INTERNATIONAL STANDARD ISO 11553-1 First edition 2005-02-01 Safety of machinery Laser processing machines Part 1: General safety requirements Sécurité des machines Machines à laser Partie 1: Prescriptions

JOB CODE Country Position Salary details Mode of interview. JOB CODE-385 BAHRAIN Sofa Maker BD BD 170 Tele/Skype

JOB CODE Country Position Salary details Mode of interview JOB CODE-385 BAHRAIN Sofa Maker BD 150 - BD 170 Tele/ JOB CODE-385 BAHRAIN Furniture Spray Painter BD 130 - BD 150 Tele/ JOB CODE-385 BAHRAIN

ISO INTERNATIONAL STANDARD. Personal protective equipment Occupational footwear. Équipement de protection individuelle Chaussures de travail

INTERNATIONAL STANDARD ISO 20347 Second edition 2012-02-01 Personal protective equipment Occupational footwear Équipement de protection individuelle Chaussures de travail Reference number ISO 20347:2012(E)

THE RISKS TO CULTURAL HERITAGE IN

Perfil HEM140 500 mm 1 300 mm 150 mm 60 mm 30 mm 300 mm THE RISKS TO CULTURAL HERITAGE IN WESTERN AND CENTRAL ASIA University of Isfahan, Isfahan, Iran m.hejazi@eng.ui.ac.ir University of Minho Czech Technical

Statistics on RAPEX notifications (November 2017)

EUROPEAN COMMISSION JUSTICE AND CONSUMERS DIRECTORATE-GENERAL Consumer Affairs Product safety and Rapid Alert System Brussels, 4 December 2017 Statistics on RAPEX notifications (November 2017) In accordance