Perfect Grounding system. SmartEco M2M. Maximum 67% high-efficiency power saving function. (Machine to Machine, Machine to Mobile)

Transcription

1 Perfect Grounding system SmartEco M2M Maximum 67% high-efficiency power saving function (Machine to Machine, Machine to Mobile)

2 SmartEco M2M SmartEco M2M(Machine to Machine, Machine to Mobile) Mobile service to prevent accidents and to improve efficiency of various facilities by maximizing intelligent judgment ability of experts through simulations and augmented reality based on information, which is collected in real time by networking between the facilities. Mobile service is provided for all products of KD group. All facilities are managed with one hand. Mobile Service Diagnosis Consulting Optimal Operating Providing information in real-time anywhere and anytime through a visual technique of information about operation conditions Diagnosis consulting reports concerning safety, quality, energy based on an accumulated database of facility operation Providing indexation of safety and quality through indexation algorithms based on past/present operation information, Optimal operation by prognosis algorithms Patent Management system of industrial facilities (patent: ) Power monitoring system of comprehensive energy management system (patent: ) Good Software Webmeter V1.0 (GS: ) Alternative energy hybrid system V10 (GS: )

3 Main Service Three-dimensional judgment of current conditions by analyzing the operation information of equipments/facilities. Maximization of facility efficiency and reduction in the operating expenses by performing extension/movement/inspection in a timely fashion. Safety index fire, arc, electrical short, overheating, harmonic wave Power quality index PQ index Eco index display of energy saving Real-time field information Safety diagnosis Fault diagnosis Portion discharge, Harmonic wave, Overheating, Poor connection, Short circuit Prognosis operation Load factor, Transformer temperature, Panel temperature, Active power, Power factor Indexation Fault diagnosis Prognosis operation 1. Monitoring/Management 2. Energy saving 3. Diagnosis consulting 4. Maintenance Monitoring/Management Monitoring or Managing the operation conditions of facilities by web/mobile devices without constraints of time and space. Improvement in work efficiency of administrators by automatic reporting. Energy Saving Energy saving and reduction in CO 2 emissions through peak power control, optimization operation of facilities and accident prognosis operation. Maximization of energy saving by analyzing the database and removing the energy wasting factors. Diagnosis consulting Providing the diagnosis consulting service of the expert group based on operation information of the facilities. Improvement in power quality and Extension of a facility lifespan. Maintenance Optimal index operation with extension/establishment of facilities and Maintenance service in a timely fashion by realizing the augmented reality by prognosis algorithms based on past/present information. Main Service Monitoring power information 24 hours a day for 365 days a year in real-time Use of efficient energy by optimal operation of the facilities 30% reduction in industrial disaster by the prognosis algorithms 30% decrease in maintenance cost through PC and mobile operation

4 SmartEco M2M SmartEco M2M(Machine to Machine, Machine to Mobile) SmartEco M2M System Schematic Diagram Electricity Facilities Energy L-4 Switch Firewall Router Wireless LAN PV Wire LAN PC web browser Building Mobile web browser Telecommunications company network Fire Security Water e-ums? As e-ums is SmartEco M2M multi-functional instrument, the instrument is to analyze in detail through selfsaving and transmission from the field to the M2M server after collecting the information by wire/wireless networks. The instrument is composed of multi-modules, and can be flexibly applied to various fields. If field management is desired, monitoring and control is possible in the field using a touch monitor. Characteristics of e-ums 1) Warning notification for customers and transmission toward the server using W-CDMA. 2) A module type with various functions of quality analysis through power measurement and capture of power wave, measurement of leakage current and temperature, and digital and analog input/output. 3) If a distance between e-ums and LAN HUB is more 100m, the wireless communication (wireless LAN, RF and W-CDMA) can be used. SmartEco M2M Customer System SmartEco M2M customer system is a comprehensive information control system which can monitor and control the facilities by web. Also, it is not only composed of a mobile system limited by the constraints of time and space, but it is also a monitoring system of the future type using a web system with PC. Comprehensive inspection Energy saving condition Mobile management

5 A kind of Service by SmartEco M2M Customer Switchgear and Motor control center M2M service iken (Internet Korea Electric Network) Power Distribution board M2M service bken (Distribution Board Korea Electric Network) Accident prevention by monitoring and controlling loads in advance bken device Short circuit wave Temp. bken device Monitoring, control, self-diagnosis and disaster prevention of electricity facilities Electricity: voltage, current, power, power factor, frequency, unbalance rate, peak, etc. Leakage: detection of I gr and I o by circuit Wave: detection of power quality information on sag, swell, highfrequency, power outage Temperature: temperature detection of high-/low voltage line by circuit Control: Input/output information of digital and analog Monitoring and controlling distribution boards with fire hazards Comprehensive electricity information service by the remote monitoring Interface with switchgear facilities, Operating the intelligent monitoring system Prognosis operation, SMS notification function of warnings and events Measuring function: voltage, current, accumulated power, leakage current (I o, I gr ), busbar temperature Display function: Monitoring tree-phase voltage/current/accumulated power/leakage current * It is possible to monitor a maximum 30 of bken(distribution board). Facility management M2M service pken (Peak Management Korea Electric Network) Power consumption analysis of electrical equipments, An efficient system to decrease electric charges and consumption through the control in overload. Aircon Aircon Aircon Aircon Remote control of 15min demand (peak power) conditions Efficient management of electricity loads Reduction in electric charges by peak power control Remote monitoring and diagnosis service uken (Utility Management Korea Electric Network) Efficient management of major facilities which are straggled and operated in the fields Fire Water tank SecurityElevator Input state(6 channels): condition monitoring of basement flooding, elevator stop in emergency and various pumps related to firefighting Output control inspection(6 channels): output monitoring of feedwater pump, drain pump, hydrant pump, etc. Water level monitoring(4 channels): water tank, oil tank, fire protection water tank, water level, water level sensor

6 SmartEco M2M SmartEco M2M(Machine to Machine, Machine to Mobile) Generator M2M service gken (Generator Korea Electric Network) An unmanned operation management system with automatic emergency operation functions, Keeping the optimal generator condition by adopting a self-learning algorithm Sensors Engine monitoring: oil temperature, fuel quantity, lubricant pressure, coolant temperature Generation monitoring: voltage, current, power, power factor, frequency, unbalance rate, etc Reporting function: print function of reports (hourly, daily, monthly) Photovoltaic M2M service pken (Energy Korea Electric Network) Remote monitoring the values such as voltage, current and power measured from PV and inverter, Accident prevention with fault diagnosis algorithms by circuit Inverter E-checker Adopting the fault diagnosis algorithms (fault diagnosis by circuit) Monitoring of measurement information such as voltage, current, power, etc. Printing function of hourly, daily, monthly and yearly reports System Composition Module Module Model Function description Essential Option Power supply Power supply for the whole system CPU board, Managing the whole system Communication RS 232 or RS 485 interface (4ch) 16ch digital contact point inputs 8ch relay outputs 8ch analog inputs (voltage) 8ch analog outputs (voltage) Power measurement Wave capture Leakage current Measuring 8ch leakage current Measuring voltage, current, power, power factor, unbalance rate, frequency and loading rate of single-/three-phase Voltage/current and event capture, and harmonic wave measurement of three-phase

7 SmartEco Facility System 10 min after power cut Power Measurement Wave Capture Measuring Range Measuring Items Single-phase Voltage Three-phase Voltage Current Frequency Voltage, Current, Power, Power factor, Frequency, Loading rate, unbalance rate Measuring Harmonic wave Real-time Capture Event Capture Three-phase voltage, current Three-phase voltage, current Power cut, Seg, Swell, Under voltage Single-/Three-phase voltage, current Power Measurement Analog Input RS 485 4Port or RS 232C 4Port Communication of Measurement instrument, Signal wave Capture Analog Output Digital Input Digital Output Operating Temperature Rated load Maximum load SmartEco M2M Service fees Additional discussion Division Capacity Monthly fixed amount (won) Common service Service period Note LV 100kW 300kW Heavy Electric Power Field 500kW 700kW HV 900kW 1.2MW 1.5MW 2.0MW 30kW Photovoltaic (basic service) 50kW 100kW 500kW 1MW 2MW Facility Management ~10 Contact Points 11~20 Contact Points 5,000 10,000 30,000 50,000 70,000 90, ,000200,000 30,000 70,000 90, ,000300,000600,000 30,000 50,000 70,000 Report service (daily, monthly, yearly) / Real-time monitoring Diagnosis consulting service / Webmeter service / Mobile service SMS service (free 100 events /month), * Free 300 events in case of over 500kW Remote monitoring Facility warning and SMS notification functions Providing Power quantity, Reduction cost, Measuring value 36 months Additional fees in case of over SMS service (30 won/event) 21~50 51 Contact Contact Points Points ~ Report service (daily, monthly, yearly) Real-time remote monitoring Mobile service

8 Optimal operation of this product is possible through internet and mobile! SmartEco M2M Mobile Service Free Economy Service for 6 months during commercialization period (2010 only) This is a mobile service to maximize intelligent judgment ability of expert group by more 10 times, to improve efficiency of various facilities, and to predict accidents with possible occurrence by networking various facilities through simulation and augmented reality on the basis of information collected in real time, which is applied to all products of KD Group. Monitoring Support Facilities Elevator, Fire Receiver, Water Tank, Temperature, Humidity, Drain, Feed Pump, Air Conditioning Equipment, Air Conditioning and Heating, Crime Prevention, Distribution Panel, Motor Control Center, Lighting Control, Dynamic Image Monitoring, Emergency Exit Integrated Monitoring of Energy Monitoring and fault prognosis of combined energy of Power + Photovoltaic + Wind Power + Geothermal+ Solar Heating System 모바일 M2M 증강현실제공 / Mobile M2M Augmented Reality Service 놀이공원 / Amusement park, 산업시설 / Industrial facilities 공공시설 / public facilities, 아파트 /apartment 대체에너지분야 / alternative energy, 상점 /store 유통상가 / Distribution Arcade, 백화점 / department store Manufacturing and selling the imitation of our product are subject to punishment. BBN PARTNERS. T C F E bbn@bbnworld.net Inquiry on product and A/S application are possible by internet all over the nation, and we will take appropriate measures within 48 hours after the receipt of application. This product can be changed for improvement of quality and performance.