PME - Projector Mount Electric

Transcription

1 SHEET 1 of 7 DESIGN HIGHLIGHTS Quiet smooth rotation FUNCTION A ceiling mounted motorised swivel unit that allows a projector to be electronically rotated in either direction. Space efficient compact design Bi-directional swivel Adjustable tilt Full cable management Stylish look and finish, with all cables concealed within the pole Wide range of screen mounting options Wide range of ceiling mounting options to suit different ceiling structures SUITABILITY The PME is suitable for all projectors up to a maximum weight of 50kg [110Ibs]. SPECIFYING Specify the desired distance from the ceiling to the top of the projector. This will be used to establish the length of the pole. Check projector details for mounting possibilities. OPTIONS Check angles for viewing. Custom pole length Marine suitable option Bang & Olufsen / Loewe mount option CONTROL Supplied with basic infrared remote. Can be learnt by many learning remotes. Also has switch control and RS232 so can be operated by relays, switches, Crestron / AMX or Lutron systems. WARNING It is the responsibility of the installer to warn all potential end users of the dangers of interfering with mechanisms during operation IMPORTANT Mechanisms which lift or move weights need to be checked on a yearly basis for any damage which may result in an accident

2 Design Highlights SHEET 2 of 7 A robust, quiet and fast moving Electric Swivel Unit allows for 180 of projector rotation in both directions. A range of mechanism mounting methods allow for installation in a wide range of ceiling structures. Sophisticated electronics allow for favourite viewing positions to be programmed via the IR remote control. All the power and signal cables for the screen are concealed within the pole, allowing for the neatest possible installation. All projector and power cables are protected from damage and are easily accessible for future changes to the AV setup. The stainless steel pole is cut to order to ensure that the required mounting height of the screen can be achieved.

3 Mechanism Mounting Options The mechanism is supplied with all necessary components for mounting between joists, on a flat platform between joists, or to suspend from a Unistrut arrangement above. Telescopic Joist Mounting Brackets are attached as standard and must be removed for platform or Unistrut mounting. MOUNTING BETWEEN JOISTS UNISTRUT MOUNTING SHEET 3 of 7 Telescopic Joist Mounting Brackets Slots in the top faces allow for M8 studding to be fixed between Unistrut and mechanism PLATFORM MOUNTING All Mounting Brackets removed to allow for fixing directly through Base Panel

4 SHEET 4 of 7 Mounting Between Joists 355 [14.0] max. 235 [9.3] min. 514 [20.2] max. 360 [14.2] min. 2.0 min. 50 min. CABLE CLEARANCE Ceiling Joists SECTION B-B Ceiling C A B B SECTION A-A DETAIL C CLEARANCE HOLE A

5 SHEET 5 of 7 Platform Mounting 3.7 max. 95 max. 2.0 min. 50 min. CABLE CLEARANCE E Ceiling Joists Ceiling D Load Bearing Platform Fixing Points E max. 29 max. SECTION E-E CLEARANCE HOLE DETAIL D

6 SHEET 6 of 7 Unistrut Mounting Slots for M8 Studding Unistrut (Not supplied) M8 Studding (Not Supplied) 2.0 min. 50 min. CABLE CLEARANCE F 3.7 max. 95 max Ceiling G 1.1 max. 29 max SECTION G-G CLEARANCE HOLE G DETAIL F

7 Mechanism Dimensions SHEET 7 of [20.2] max. 360 [14.2] min Finished Ceiling Distance from Ceiling to top of Projector