Industrial infrared heater IR For premises with large volumes and high ceilings

Size: px

Start display at page:

Download "Industrial infrared heater IR For premises with large volumes and high ceilings"

Laureen Jordan
5 years ago
Views:

1 Electrically heated W 3 models Industrial infrared heater For premises with large volumes and high ceilings Application is suitabe for total or supplementary heating of premises with large volume and high ceilings. It can also be used outdoors for example on sport arena stands or to keep loading bays dry and frostless. Comfort Radiant heaters give an efficient and pleasant heat and individual comfort can be created with spot and zone heating. o moving parts mean a silent system that does not cause air movements or the spreading of particles. Operation and economy Radiant heaters have an easy and flexible installation and require a minimum of maintenance. They give instant heat and no preheating is necessary. Radiant heaters can give cost savings of up to 25 % compared to convector heaters, especially in buildings with high ceilings that are used on an irregular basis. Product specifications Reflectors of shiny anodized aluminium for optimal heat distribution. The mounting hinges allow the heater to be angled in five different positions. Casing of grey alu-zinc coated steel panels, very resistant against corrosion. Connection plinth which allows for connection of a regulator or for serial connection of several heaters. Protection grille is available as an accessory. IP. Design Robust industrial design. Installation height,5 20 m 6 m Design and specifications are subject to change without notice

This train station outside Stockholm is heated by.

The heater can be mounted in an angeled position to direct the heating where it is needed.

In this installation the working stations are heated by heaters in the ceiling and C heaters on the wall.

2 This train station outside Stockholm is heated by. A control with timer allow waiting passengers to increase the heat when it is particularly cold. The heater can be mounted in an angeled position to direct the heating where it is needed. Heaters used outdoors should be placed under a roof. In this installation the working stations are heated by heaters in the ceiling and C heaters on the wall. To divide a large hall into different zones is very energy effective especially in buildings where each zone is sporadically used. Protection grille G, available as an accessory, can be used to protect the heater in for example sports centres. The temperature can be adapted perfectly in different areas of a room with. Spot heating increases the comfort and lowers the heating costs. Temperature contribution t op = t room + t rad. 2 [ t rad. ] 0 C 35 C 30 C 25 C 500 Installation height 2 m 3 m m 20 C 5 C 0 C [m] - 2 -, ,5 0 0,5,5 2

3 Technical specifications Industrial infrared heater 3 Type Output stages [kw] Voltage [V] Amperage [A] Max. element temperature [ C] Dimensions LxHxW Weight [kg] 3000 /2/3 00V3~*, x83x /3/.5 00V3~* 6, x83x //6 00V3~* 8, x83x *¹) Can also be connected 00V3~, but then without output stages. With neutral, one element tube at a time can be connected. Protection class : (IP), splash-proof design. CE compliant. Dimensions Type L Positioning, mounting and installation Positioning For spot heating, the infrared heaters should be positioned so that people get heat from the front and from behind. The distance to the head should not be less than 2 metres. Read more in the Technical handbook. Mounting is delivered with mounting brackets and can be mounted directly on the ceiling or the wall. The mounting allow the radiation angle to be adjusted 30 in each direction. The heaters can also be suspended from wire (minimum Ø 3 mm). should always be mounted with the tube elements in an horizontal position. Protection grille G is available as an accessory. For minimum mounting distance, see Fig.. Connection is intended for permanent installation. In the terminal box are double connection plinths for cables of up to 6 mm². This allows for serial connection. Minimum distance Ceiling A 00 Wall, long side of the unit B 00 Wall, short side of the unit C 00 Flammable material D 700 Floor E 00 Fig. : Minimum distance for permanent installation.

4 Control options Control by thermostat, contactor and switch (and timer) The choice of thermostat depends on needs and environment. Connection is made by a 3-step switch making it possible to manually connect the elements + +. Timer can be set to desired time. T0, electronic thermostat with concealed knob TK0, electronic thermostat with visible knob KRT900, capillary tube thermostat, IP55 S, manual switch for -2-3 output steps CBT, timer For further options, see section on thermostats and controls or contact Frico. Accessories G, protecion grille Can be used to protect the heaters in sport centres. Available in three dimensions to fit each of the models. Controls and other accessories Type Description HxWxD T0 Electronic thermostat with concealed knob 80x80x3 TK0 Electronic thermostat with visible knob 80x80x3 KRT900 Capillary room thermostat, IP55 65x57x60 S Manual switch for -2-3 output steps 72x6x6 CBT Timer 55x87x3 G3000 Protection grille x362x0 G500 Protection grille 500 5x362x0 G6000 Protection grille x362x0

Heat contribution Heat contribution directly below.5-6 kw Heat contribution [ C] 250 200 A 50 2A 00 50 0 0 0.5.5 2 2.5 3 Distance to [m] Radiant heat contribution.

5 Heat contribution Heat contribution directly below.5-6 kw Heat contribution [ C] A 50 2A Distance to [m] Radiant heat contribution.5 kw Radiant heat contribution 6 kw Output [W/m²] Output [W/m²] Radiant heat contribution [ C] Height above measure point [m] Radiant heat contribution [ C] Height above measure point [m] A-distance between the heaters [m] A-distance between the heaters [m]

6 Wiring diagrams Internal wiring diagram 3000, 500, 6000 Industrial infrared heater 00V3~ L L3 Control by thermostat, contactor and switch 0V~ L Thermostat 00V~ L L3 3/3 X XX 2/3X X /3X S L 3 L L 2 L L L 3 2 Control by timer CBT L 2 3 0V~ 00V~ L L L3 L 3 L L 2 L L L 3 2 Design and specifications are subject to change without notice. Frico AB

Industrial infrared heater IR

Industrial infrared heater IR Industrial infrared heater For premises with large volumes and high ceilings 3 models 3 3000 6000 W Application is suitabe for total or supplementary heating of premises with large volume and high ceilings.