Thermozone AD Corinte

Transcription

1 R Thermozone AD Corinte Ambient, no heat Electrical heat 15 22,5 kw Water heat Vertical: 2,2 and 2,5 metres Horizontal: 1,7 and 2,2 metres Thermozone AD Corinte Air curtains for doors with heights of up to 3,5 metres AD Corinte is intended for exclusive shop entrances and other environments with high demands in respect of design. Available in polished stainless steel as standard, can also be obtained in brushed or mirror-finished stainless steel. AD Corinte includes new fan technology with radial fans which means further improvements in respect of sound level and performance. Cold draughts and energy loss can be prevented whilst the AD Corinte contributes to the heating of the premises. The availability of three lengths provides the opportunity to cover openings of different widths and heights.the air curtains can be installed vertically on either or both sides of the entrance, or a number of units can be mounted side by side over the doorway. It is recommended that the units are supplied with a frequency inverter. Fan motors can be connected for 3x230V or 3x400V. AD Corinte with water heat is equipped with a coarse filter to protect fans / water battery. Can also be equipped with a fine filter, class F5 (EU5) as an accessory. AD Corinte with electrical heat may be equipped with an aluminium filter. Frico fan technology using radial fans which means further improvements in respect of sound level and performance. Produced in polished stainless steel as standard, but also available in brushed or mirror-polished stainless steel. Colour intake and outlet grille: black, RAL 9005 AD Corinte is available for horizontal or vertical mounting. The AD Corinte has an exclusive design that suits shop entrances and office environments. A fine filter F5 (EU5) is available as an accessory for water heated units. For vertical mounting, electricity and/or water may be connected from above or below. Optimized airflow with Thermozone technology. Air velocity profile 0,1 m AD Corinte E/W Peak* 1 AMCA* 2 14,0 m/s 13,2 m/s 1,0 m 7,0 m/s 5,8 m/s This product is sold and serviced by: 2,0 m 4,5 m/s 4,4 m/s 3,0 m 3,6 m/s 3,7 m/s For contact details, see 3,5 m 3,3 m/s 3,4 m/s *¹) Peak values. *²) Mean values according to AMCA "Test methods for Air Curtain Units"

2 Technical specifications Thermozone AD Corinte A without heat 1 Type Output Airflow [m 3 /h] Sound level* 6 [db(a)] Output motor [W] Voltage* 3 motor [V] Voltage inverter [V] Amperage motor 400V3~/230V3~ [A] Length [mm] Weight [kg] ADCH17A*¹ / / V3~/400V3~ 230V~ 1,7/2, ADCH22A / / V3~/400V3~ 230V~ 2,5/4, ADCV22A*² / / V3~/400V3~ 230V~ 2,5/4, ADCV25A / / V3~/400V3~ 230V~ 2,9/5, Technical specifications Thermozone AD Corinte E with electrical heat 3 Type Output steps Airflow t* 5 Sound level* 6 Output motor Voltage* 3 motor Voltage inverter Amperage motor 400V3~/ 230V3~ Voltage [V] Amperage [A] heat Length Weight [m 3 /h] [db(a)] [W] [V] [V] [A] [mm] [kg] ADCH17E*¹ 0/7,5/ / /15 40/ V3~/400V3~ 230V~ 1,7/2,8 400V3~/21, ADCH22E 0/10/ / /15 42/ V3~/400V3~ 230V~ 2,5/4,3 400V3~/28, ADCV22E* 2 0/10/ / /15 42/ V3~/400V3~ 230V~ 2,5/4,3 400V3~/28, ADCV25E 0/11,2/22,5 2050/ /15 43/ V3~/400V3~ 230V~ 2,9/5,0 400V3~/32, Technical specifications Thermozone AD Corinte WL with water heat, coil for low tempered water < 80/60 C 2 t* 4,5 Type Output* 4 Airflow Water Sound Output Voltage Voltage Amperage Length Weight volume level* 6 motor motor* 3 inverter motor 400V3~/ 230V3~ [m 3 /h] [l] [db(a)] [W] [V] [V] [A] mm] [kg] ADCH17WL*¹ / /32 2,8 39/ V3~/400V3~ 230V~ 1,6/2, ADCH22WL / /33 3,6 42/ V3~/400V3~ 230V~ 2,3/4, ADCV22WL*² / /33 3,6 42/ V3~/400V3~ 230V~ 2,3/4, ADCV25WL / /34 4,0 42/ V3~/400V3~ 230V~ 2,6/4, *¹) For horizontal mounting (H= horizontal). *²) For vertical mounting (V= vertical). * 3 ) Delivered connected for 230V3~. Convertible from 230V3~ to 400V3~. * 4 ) Applicable at water temperature 80/60 C, air temperature in + 15 C. * 5 ) Dt= temperature rise of passing air at maximum heat output and lowest/highest airflow. * 6 ) Conditions: Distance to the unit: 5 metres. Directional factor: 2. Equivalent absorption area: 200 m 2. Protection class AD Corinte A/E/W: IP20. CE compliant. Design and specifications are subject to change without notice.

3 Dimensions Vertical Opening Outlet Intake Upper part of the unit seen from above Connection hatch Connection hatch Bottom part of the unit seen from above

4 Extension hood Connections from above Connections from below 80 60

5 Dimensions Horizontal 1700/ / Ø

6 Positioning, mounting and installation Mounting AD Corinte can be mounted either vertically or horizontally. For horizontal mounting, the unit may be mounted on the wall or on the ceiling with the enclosed brackets. For suspended mounting from the ceiling, suitable devices (threaded bars, rails etc.) are fixed on the brackets. A mounting edging is included with the vertically mounted units. The edging is put on the floor beneath the air curtain. The unit is anchored to the floor with expansion-shell bolts for instance. When ordering AD Corinte for vertical mounting it is necessary to specify on which side of the opening it should be positioned. It is recommended to specify if electricity and/or water connections should be made from above or below, but this can be altered on site. When ordering AD Corinte for horizontal mounting, it is necessary to specify left or right connection (seen from inside the building). The unit can be provided with an extension hood to cover the distance between unit and ceiling (max length 1000 mm) Min 180 mm Min 180 mm Connection AD Corinte E 3 Thermozone AD Corinte should be equipped with a frequency inverter (FC15A/FC15M) for variable fan speed regulation. The electrical connection may be done from above or below. The appliance should be preceded by a triple pole switch with at least 3 mm breaking gap. For units with electrical heating, power and control should be supplied separately. For connection between inverter and motors a cable with braided, tinned copper mesh shield (type C4), with 85 % coverage should be used. Connection AD Corinte W 2 Thermozone AD Corinte should be equipped with a frequency inverter (FC15A/FC15M) for variable fan speed regulation. The water connection may be done from above or below. When connecting the water on top or from below, there is space, but limited, inside the unit for pipe connections. The appliance should be preceded by a triple pole switch with at least 3 mm breaking gap. For connection between inverter and motors a cable with braided, tinned copper mesh shield (type C4), with 85 % coverage should be used. Fig. 1: Minimum distance for water supplied units (for electrical units see

7 Control kits Ambient 1 Airflow is controlled manually with a frequency inverter. Complete control kit: - FC15M, frequency inverter with EMC filter. Electrical heat 3 Airflow and heat output are controlled automatically based on the opening of the door, outdoor temperature and the room temperature. The system is based on an advanced microprocessing regulator in an attractive design. All parameters are pre-programmed for easy and quick installation. Complete control kit: - ADEA, regulator (complete with outdoor sensor, built in room sensor and door contact). - ADEAEB, control board, for external mounting. - FC15A, frequency inverter with EMC filter. Read more about operation and usage of ADEA in chapter on Controls and accessories. See chapter on Controls and accessories or contact Frico for further alternatives. Water heat 2 Level 1 Airflow is controlled manually with a frequency inverter. Room thermostat controls the heat output via actuator/ valve. Complete control kit: - FC15M, frequency inverter with EMC filter. - T10, room thermostat IP30 (option KRT1900, IP55). - VR20/25, set of valves (option only actuator/valve SD20/TVV20 or TVV25). Level 2 Airflow and heat output are controlled automatically based on the opening of the door, outdoor temperature and the room temperature. The system is based on an advanced microprocessing regulator in an attractive design. All parameters are pre-programmed for easy and quick installation. Complete control kit: - ADEA, regulator (complete with outdoor sensor, built in room sensor and door contact). - ADEAEB, control board, for external mounting. - VR20/25, set of valves (option only actuator/valve SD20/TVV20 or TVV25). - FC15A, frequency inverter with EMC filter. Read more about operation and usage of ADEA in chapter on Controls and accessories. Accessories FC15A/FC15M, frequency inverter Frequency inverter for variable fan speed control of AD Corinte. Input voltage 230V~, output voltage 3x230V~. Max input inverter 16 A at 230V~ supply voltage. EMCfilter is included as standard. IP20. All settings are preprogrammed for regulation in combination with ADEA. FC15M is similar to FC15A but pre-programmed for manual fan speed control. ADCEH, extension hood Extension hood used to cover the space between the ceiling and the air curtain for a neat finish.

8 Output charts water AD Corinte WL (standard coil) Incoming / outgoing water temperature 80/60 C Incoming air temp. = +15 C Incoming air temp. = +20 C Type Fan position Airflow Output Output [m 3 /h] Outgoing air temp. Water flow Outgoing air temp. ADC17WL max ,5 47 0,40 30,3 49 0,36 min ,1 57 0,24 18,2 58 0,21 ADC22WL max ,9 48 0,54 41,5 50 0,49 min ,7 58 0,31 24,2 59 0,28 ADC25WL max ,0 49 0,62 47,2 50 0,56 min ,5 58 0,36 27,8 59 0,33 Water flow Type Fan position Airflow [m 3 /h] Incoming / outgoing water temperature 60/50 C Incoming air temp. = +15 C Incoming air temp. = +20 C Output Outgoing Water Output Outgoing air temp. flow air temp. ADC17WL max ,5 39 0,58 21,3 41 0,50 min ,6 45 0,34 12,7 46 0,30 ADC22WL max ,4 39 0,79 29,1 41 0,69 min ,3 46 0,46 16,9 47 0,40 ADC25WL max ,9 40 0,90 33,1 41 0,78 min ,0 46 0,52 19,3 47 0,46 Water flow Type Fan position Airflow [m 3 /h] Incoming / outgoing water temperature 60/40 C Incoming air temp. = +15 C Incoming air temp. = +20 C Output Outgoing Water Output Outgoing air temp. flow air temp. ADC17WL max ,2 34 0,24 16,9 36 0,20 min ,3 41 0,14 10,4 42 0,12 ADC22WL max ,1 35 0,33 23,6 37 0,28 min ,6 41 0,19 14,1 43 0,16 ADC25WL max ,0 36 0,38 27,0 37 0,32 min ,1 42 0,22 16,2 43 0,19 Water flow Type Fan position Airflow [m 3 /h] Incoming / outgoing water temperature 60/30 C Incoming air temp. = +15 C Incoming air temp. = +20 C Output Outgoing Water Output Outgoing air temp. flow air temp. ADC17WL max ,1 29 0,12 11,5 31 0,09 min ,6 35 0,07 7,4 35 0,05 ADC22WL max ,6 31 0,17 16,7 32 0,13 min ,3 36 0,10 10,4 37 0,08 ADC25WL max ,9 31 0,19 19,3 32 0,15 min ,3 37 0,12 12,1 37 0,09 Water flow

9 Pressure drop water Water pressure drop over AD Corinte W water battery Water flow [m 3 /h] Pressure drop [kpa] 70 0,1 1,0 10 0,7 Pressure drop [bar] 10 ADC22/25 ADC17 0,1 1 0,01 0,1 1,0 Water flow 0,01 Water pressure drop over regulations and valves Water flow [m 3 /h] Pressure drop [kpa] 70 0,1 1,0 10 0,7 Pressure drop [bar] 10 0,1 V V 1 0,01 0,1 1,0 Water flow 0,01 The pressure drop is calculated for an average temperature of 70 C (PVV80/60). For other water temperatures, the pressure drop is multiplied by the factor K. Average temp. water C K 1,10 1,06 1,03 1,00 0,97 0,93

10 Wiring diagrams AD Corinte A Ambient control options - Level 1 FC15M, frequency inverter Design and specifications are subject to change without notice.

11 Wiring diagrams AD Corinte E Electrical control options - Level 3 MDCDC, magnetic door contact FC15A, frequency inverter ADEAOS, outdoor sensor ADEAR, regulator with display unit and built-in room sensor ADEAEB, external control board ADEAIS, external room sensor

12 Wiring diagrams AD Corinte W Water control options Water - Level 1 T10, room thermostat TVV20/25, 2-way regulation valve FC15M, frequency inverter SD20, actuator

13 Water - Level 2 FC15A, frequency inverter ADEAR, regulator with display unit and built-in room sensor ADEAIS, external room sensor MDCDC, magnetic door contact ADEAOS, outdoor sensor ADEAEB, external control board TVV20/25 2-way regulation valve SD20, actuator