Thermostats. Type Voltage Max. current Setting range Protection class HxWxD breakpoint [V] [A] [ C] [mm] RTEV C IP30 71x71x28

Size: px

Start display at page:

Download "Thermostats. Type Voltage Max. current Setting range Protection class HxWxD breakpoint [V] [A] [ C] [mm] RTEV C IP30 71x71x28"

Quentin Haynes
5 years ago
Views:

1 Thermostats RTE 0/0 RTEV 0/0/0V RTEV 0/0 RTEV 0 Electronic thermostats Setting of temperature on the RTE 0/0 is done on the circuit board under the housing to prevent unauthorised persons from changing the selected temperature. Thermostats are designed to control heat directly or to be used as sensors in larger centrally controlled facilities. RTEV 0/0 is equipped with a dial for setting the temperature. The setting range can be limited on the back of the dial and the thermostat can be calibrated there as well, if necessary. RTEV 0V is also equipped with an alternating relay and can therefore be used for the regulation of heating or cooling. External sensors mounted in ventilation ducts or the floor can also be connected. RTEV 0/0 has a function switch for on/off connection as well as the optional connection of external sensors. A fixed temperature reduction of ºC can be activated by an externally connected contact, such as a weekly timer. The setting range can be limited and calibrated on the setting dial. RTEV 0 also has a built-in clock function in addition to the dial and the option of connecting external duct or floor sensors. The period for temperature reduction by ºC is, 7,, or 6 hours. The preferred period is set on the circuit board upon installation. The reduction period is activated by pushing the start button at the desired time of day. The clock is then set and the reduction period starts at that time every day automatically. An ongoing temperature reduction period can be interrupted with a push of the start button. The following day, the reduction period once again begins at the usual set time. Type Voltage Max. current Setting range rotection class HxWxD breakpoint [V] [A] [ C] [mm] RTE C 7x7x8 RTE C 7x7x8 RTEV C 7x7x8 RTEV C 7x7x8 RTEV0V C 7x7x8 RTEV C 7x7x8 RTEV C 7x7x8 RTEV C 7x7x8 8 Frico AB, Box 0, SE- artille Tel: Fax: mailbox@frico.se

2 KRT900/90 KRTV9 KRTE Capsulated Thermostats Capillary tube thermostats and electrical thermostats with alternating contacts Capillary tube thermostats with alternating contacts for the control of heaters and fans. The housing is of thermal plastic. Convertible between 0/00 V and approved for 6 A at 0 V and 0 A at 00 V. KRT 900/90 both have internal dials but have different setting ranges. KRTV 9 has an external dial with an adjustable stop for the imum setting. Electronic thermostats are not subject to mechanical wear. Thus, they are very reliable and have longer durability. A sensor on a metres long cable is included with the KRTE thermostat. The sensor can be placed anywhere or fixed directly on the thermostat. The cable is easily extendable. The KRTE has an alternating contact and is approved for 0A at 0V. Type Voltage Setting range rotection class HxWxD KRT900 0/ C I 6x7x60 KRT90 0/ C I 6x7x60 KRTV9 0/ C I 6x7x60 KRTE C I 6x7x60 Frico AB, Box 0, SE- artille Tel: Fax: mailbox@frico.se 9

3 KRT stage thermostats, capillary tube -stage regulation is appropriate for the soft and economical control of heating output in e.g. fan heaters and air curtains. There are two types to choose from: KRT 800 with an adjustable temperature difference between the stages ( - C). 000 with a fixed temperature difference ( C) between the stages. Both are convertible between 0/00V and approved for 6A at 0V and 0A at 00V. Type Voltage Setting range rotection class HxWxD KRT800 0/ C I 6x7x / C I x00x7 RTI -stage thermostat, electronic -stage thermostat with internal setting. Adjustable temperature difference between the stages ( 0 C). Type Voltage Setting range rotection class HxWxD RTI 0/ C I 0x80x0 0 Frico AB, Box 0, SE- artille Tel: Fax: mailbox@frico.se

4 WIRIG DIAGRAMS THERMOSTATS Internal wiring diagrams RTE 0 0V~ L 00V~ L RTE 0 RTE(V)0 A RTE(V)0 8 A RTEV 0 RTEV 0 RTEV 0V 6 RTEV0V Cool 0V~ Heat A RTEV 0 RTEV0 0V~ A 6 h h 0V~ RTEV 0 7 h h RTEV0 A Ext. sensor RTEV 0 RTEV0 L 00V~ L 8 A Frico AB, Box 0, SE- artille Tel: Fax: mailbox@frico.se

5 WIRIG DIAGRAMS THERMOSTATS Internal wiring diagrams KRT(V) 9(00) 6A 0V~ /0A 00V~ KRTE 0A 0V~ /6A 00V~ <ϑ 0V~ KRT900 A B KRTE TC KRTV9 L L () L L ( ) KRT 800, 6A 0V~ /0A 00V~ 000 0A 0/ 00 V~ KRT L L () L L () RTI 6A 0V~ /0A 00V~ <J <J 0V~ RTI L 6 7 L L ( ) Frico AB, Box 0, SE- artille Tel: Fax: mailbox@frico.se

Fan heater Panther Powerful fan heater for large premises

Fan heater Panther Powerful fan heater for large premises 3 20 30 Electrical heat 5 models Fan heater Panther 20-30 Powerful fan heater for large premises Application Panther 20 30 is a range of powerful and quiet fan heaters for stationary use. They are intended