LED-Technology für CCH Ex Light Fittings

Transcription

1 LED-Technology für CCH Ex Light Fittings The linear explosion protected LED- Light Fitting for Zone 1 ellk 92 LED 400 / /2012 PLM Lighting Willi Steckel/Klaus Weyer

2 Conventional light sources vs. LED Light for the future? 2

3 Inorganic LEDs and Retrofits LED T8 replacements may contain dozens of high power LEDs or hundreds of 5 mm SMD- LED s behind a clear or frosted lens, all in a bipin T8 lamp package. 3

4 OLED (organic light emitting diode) 4

5 LED Lighting for Hazardous Area Zone 1 Handlamps / torches Div 2 & zone 2 Plant lighting Div 2 & zone 2 Flood light Div 1 & zone 1 Plant lighting Zone1 Plant lighting But what about Linear LED?? Div2 obstruction lighting Zone1 & Div2 Exit lighting Zone1 & Div2 Signalling 5

6 Linear LED Retrofits At present linear LED solutions are mainly offered for non-hazardous applications. Widely known and offered are LED tubes as retrofit for existing fluorescent lamps very few with LED modules or LED stripes Both systems still do not offer light output levels equiv. to T8 fluorescent lamps. 6

7 On the market there are many suppliers of LED tubes who want to replace T8 fluorescent lamps: Linear LED Retrofits Off Stage LGN Trophies LED Lighting BS Ledlight LedLight Europe LED Line Type Consumption Lumen output Lm/W T8 TL-D 36W 36 W LED tube Type A 15 W LED tube Type B 9 W LED tube Type C 25 W

8 Linear LED in hazardous area light fittings Points to observe for hazardous environment: Type of protection Temperature Blinding/glare Component life time/reliability Light output Light distribution /directionality Energy saving 8

9 Linear LED in hazardous area light fittings LED retrofit tubes in light fittings of increased safety type Ex-e require an approved type of protection acc. IEC/EN ex-standards. Thus they require to be operated with components that do not spark, arc or create heat above T-ratings. LED s are semi conductors and can only be operated in an Ex d - flameproof enclosure without special protection. For use in Ex e light fittings a suitable type of protection has to be selected. Visible Light Heat 9

10 Temperature plays a vital role in explosion protection but also has a large influence on the life time of any LED. Why is temperature so critical? Linear LED in hazardous area light fittings Lumen output is reduced as junction temperature increase. 5% reduction in light output for every 20º C increase Life-time dependant on junction temperature Varies by manufacturer and thermal resistance is crucial in selection process viewing angle (light) (light) (heat) 10

11 Linear LED in hazardous area light fittings Blinding effect of LED dots 1000 lm 650 lm Equivalent lumen is distributed on LED on a fraction of the surface of a conventional light source 11

12 Linear LED in hazardous area light fittings Light is not only important for safety but also for human wellness A light density > 30k cd/m² is inconvenient = disability glare Fluorescent tubes T8: k cd/m² T5: k cd/m² Incandescent bulb (100 W) : ~25k cd/m² LED Fortimo 2000: ~700k cd/m² (LLM 225k cd/m²) Chip 1 W: ~ k cd/m² Arrays 10 W: ~ k cd/m² Typical solution would be a diffuser or frosted glass: => >50% loss of light output and change of light distribution curve. 12

13 ellk 92 LED linear with LED module Our Solution LED module for our ellk 92 in Type of protection encapsulation 13

14 ellk 92 LED linear / LED module Considering the b. m. details of the New Linear LED light fitting are based on the well-known, well proven ellk 92 series Heart piece is the LED Module replacing two 18 W or two 36 W fluorescent tubes Includes optimized temperature management for excellent life time and reliability 14

15 ellk 92 LED linear / Light technology Learned from automobile industry (head light): Indirect Light output => LED via reflector Prevent blinding effect of LED dots > 70% efficiency of light no multi shadowing 15

16 ellk 92 LED linear / Light technology Usable light output comparable with 18W fluorescent lamps Optimization of light distribution in range +/-45. 2x tubest8 LED module 16

17 Comparison Room illumination ellk 92 2x18 W T8 vs. ellk 92 LED 26 W 17

18 Visible impression ellk 92 2x18 W T8 18

19 Visible impression ellk 92 LED 26W 19

20 Comparison Route illumination ellk 92 2x18 W T8 vs. ellk 92 LED 26 W 20

21 Visible impression ellk 92 2x18 W T8 21

22 Visible impression ellk 92 LED 26W 22

23 Area illumination low reflection ellk92 2x18W T8 ellk92 LED 26W 23

24 Area illumination high reflection (80%) ellk92 2x18W T8 ellk92 LED 26W 24

25 ellk 92 LED linear Retrofit LED Module can be plugged into ellk 92 Retrofit! Upgrade of already installed ellk 92 (produced with EVG 09) For 18 and 36 W version with same electrical specifications, but 20% Energy saving Certification effort only for LED module (with given spec.) 25

26 ellk 92 LED linear / LED Driver What about the LED DRIVER? It`s our well approved EVG 09! CCH own design proven technology since mid 90 s EVG 09 Approx. 2 Mio pcs. on site Failure 0,0001 % 26