A Guaranteed Direct Replacement to Hypersil
|
|
- Donna Stanley
- 5 years ago
- Views:
Transcription
1 If you like, you ll love HyperClone A Guaranteed Direct Replacement to at a fraction of the cost! HyperClone
2 HyperClone Why HyperClone? Guaranteed Replacement to Highly reproducible Due to advanced manufacturing technology and numerous quality controls, HyperClone has an excellent reproducibility history. Long Column Lifetime HyperClone columns have shown extreme column lifetime under most rugged conditions. Mimics performance of Thermo -Keystone HyperClone is packed only by Phenomenex, thereby reducing the chance of column-to-column variation. You will receive columns of consistent quality and reproducibility, and will benefit from Phenomenex s excellent customer support and technical service. Economically priced If HyperClone analytical columns do not provide the equivalent separation as compared to columns of the same particle size, phase and dimensions, send in your comparative data within days for a FULL REFUND. Phenomenex, Inc. All rights reserved. Phenomenex l WEB:
3 Material Comparison Phenomenex HyperClone. BDS Silica Thermo -Keystone, Particle Size (µm), Pore Size (Å) Surface Area (m /g) 7. Pore Volume (ml/g). Regular Silica, Particle Size (µm), Pore Size (Å) Surface Area (m /g) 7. Pore Volume (ml/g). Carbon Load % Comparison 7 % BDS C8 7 % % BDS C8 %. % MOS (C8). % % ODS (C8) % % CN (CPS) % HyperClone µm C8 BDS App ID 8 HyperClone µm C8 BDS App ID 8 Parabens Dimensions: x. mm Mobile Phase: Water / Acetonitrile (:) Flow Rate:. ml/ Detection: nm Sample:. Methylparaben. Ethylparaben. Propylparaben. Butylparaben Antidepressants Dimensions: x. mm Mobile Phase: mm KH PO, ph 7. / Methanol / Acetonitrile (::) Flow Rate:. ml/ Detection: nm Sample:. Imiprae. Nortriptyline. Amitriptyline. Clomiprae Note: columns were manufactured by Thermo -Keystone µm C8 BDS App ID 8 µm C8 BDS App ID All information obtained from (then) Thermo Electron Corporaton -7 catalog and - Thermo Scientific Chromatography Columns catalog. Phenomenex l WEB:
4 HyperClone µm C8 BDS HyperClone µm C8 8 8 HyperClone µm C8 8 App ID App ID 7 HyperClone µm C8 App ID 7 App ID 9 Non-Polar Basic Compounds Dimensions: x. mm Mobile Phase: mm KH PO, ph. / Methanol (:) Flow Rate:. ml/ Detection: nm Sample:. Uracil. Pyridine. N-Methylaniline. N,N-Dimethylaniline.,-Dichloro--Nitroaniline. Toluene Alkylbenzenes Dimensions: x. mm Mobile Phase: Acetonitrile / Water (:) Flow Rate:. ml/ Detection: nm Sample:. Benzene. Toluene. Ethylbenzene. Propylbenzene. Butylbenzene. Amylbenzene Polarity Test Dimensions: x. mm Mobile Phase: Methanol / Water (:) Flow Rate:. ml/ Detection: nm Sample:. Thiourea. Dimethylphthalate. Toluene Benzodiazepams Dimensions: x. mm Mobile Phase: mm KH PO, ph., μl/l Triethylae/Acetonitrile (:7) Flow Rate:. ml/ Detection: nm Sample:. Bromazepam. Lorazepam. Oxazepam. Flunitrazepam. Diazepam Note: columns were manufactured by Thermo -Keystone µm C8 BDS 8 µm C8 8 App ID App ID 7 µm C8 µm C8 8 App ID 8 App ID Phenomenex l WEB:
5 HyperClone µm C8 App ID Alkylbenzenes Dimensions: x. mm Mobile Phase: Acetonitrile / Water (:) Flow Rate:. ml/ Detection: nm Sample:. Benzene. Toluene. Ethylbenzene. Propylbenzene. Butylbenzene. Amylbenzene Note: columns were manufactured by Thermo -Keystone µm C8 App ID 8 ODS QC Test 8 HyperClone µm C8 µm C8 App ID Dimensions: x. mm Mobile Phase: Water / Methanol (:7) Flow Rate:. ml/ Detection: nm Sample:. Benzamide. Acetophenone. Benzophenone. Biphenyl App ID HyperClone µm C8 BDS App ID 7 HyperClone µm C8 BDS 8 App ID 78 Tricyclic Antidepressants Dimensions: x. mm Mobile Phase: mm KH PO, ph 7. / Acetonitrile / Methanol (::) Flow Rate:. ml/ Detection: nm Sample:. Imiprae. Nortriptyline. Amitriptyline. Clomiprae Basic Drugs Dimensions: x. mm Mobile Phase: mm KH PO, ph. / Acetonitrile (8:) Flow Rate:. ml/ Detection: nm Sample:. Pseudoephedrine. Lidocaine. Pyrilae. Chlorphenirae µm C8 BDS 8 App ID 7 µm C8 BDS 8 App ID Phenomenex l WEB:
6 Non-Polar Basic Compounds HyperClone µm C8 BDS App ID Dimensions: x. mm Mobile Phase: Methanol / mm KH PO, ph. (:) Flow Rate:. ml/ Detection: nm Sample:. Uracil. Pyridine. Methylaniline. Dimethylaniline. Dichloronitroaniline. Toluene Note: columns were manufactured by Thermo -Keystone µm C8 BDS App ID 8 HyperClone µm C8 BDS App ID 8 HyperClone µm C8 BDS App ID 7 HyperClone µm C8 BDS App ID Silanol Activity Test Dimensions: x. mm Mobile Phase: Water / Acetonitrile (:) Flow Rate:. ml/ Detection: nm Sample:. Pyridine. Phenol. Toluene Surface Metal Test Dimensions: x. mm Mobile Phase: Water / Acetonitrile (:) Flow Rate:. ml/ Detection: nm Sample:.,7-Dihydroxynaphthalene.,-Dihydroxynaphthalene Hydrophobicity Test Dimensions: x. mm Mobile Phase: Water / Acetonitrile (:8) Flow Rate:. ml/ Detection: nm Sample:. Butylbenzene. Amylbenzene 8 µm C8 BDS 8 App ID 9 µm C8 BDS App ID 8 µm C8 BDS App ID 8 8 Phenomenex l WEB:
7 HyperClone µm C8 BDS 8 App ID 8 HyperClone µm C8 BDS App ID 8 Performance Test Dimensions: x. mm Mobile Phase: Water / Acetonitrile (:) Flow Rate:. ml/ Detection: nm Sample:. Acetophenone. Benzene. Toluene. Naphthalene Parabens Dimensions: x. mm Mobile Phase: Acetonitrile / mm KH PO, ph 7. (:) Flow Rate:. ml/ Detection: nm Sample:. Methylparaben. Ethylparaben. Propylparaben. Butylparaben Note: columns were manufactured by Thermo -Keystone µm C8 BDS 8 App ID µm C8 BDS 8 App ID 7 Ordering Information HyperClone μm Minibore and Analytical Columns (mm) SecurityGuard Cartridges (mm) Phases x. x. x. x. x. x. x.* x.* /pk /pk ODS (C8) F--B D--E E--D F--E AJ-8 AJ-87 /pk /pk BDS C8 B-7-B F-7-E AJ-89 AJ-9 BDS C8 B-9-B F-9-B F-9-R D-9-E F-9-E AJ-8 AJ-87 for ID:.-. mm.-8. mm μm Minibore and Analytical Columns (mm) SecurityGuard Cartridges (mm) Phases x. x. x. x. x. x. x. x. x.* x.* /pk /pk Silica F-8-E G-8-E AJ-7 AJ-8 MOS (C8) E-9-D D-9-E F-9-E G-9-E AJ-89 AJ-9 ODS (C8) F--B F--R G--R E--D G--D D--E F--E G--E AJ-8 AJ-87 CN (CPS) AJ- AJ- /pk /pk BDS C8 F-8-E G-8-E AJ-89 AJ-9 BDS C8 F--B F--R F--B G--D D--E F--E G--E AJ-8 AJ-87 for ID:.-8. mm.-8. mm μm SemiPrep Columns (mm) SecurityGuard Cartridges (mm) Phases x x /pk ODS() G--N AJ-7 for ID: 9- mm * SecurityGuard Analytical Cartridges require holder Part No.: KJO-8 SemiPrep SecurityGuard Cartridges require holder Part No.: AJO-7 If HyperClone analytical columns do not provide the equivalent separation as compared to columns of the same particle size, phase and dimensions, send in your comparative data within days for a FULL REFUND. Phenomenex l WEB: 7
8 If you like, you ll love HyperClone A Guaranteed Direct Replacement to at a fraction of the cost! Australia t: + ()-98- f: + ()-98- auinfo@phenomenex.com Austria t: + ()-9- f: + ()-9- anfrage@phenomenex.com Belgium t: + () (French) t: + () 8 (Dutch) f: + ()-879 beinfo@phenomenex.com Canada t: + (8) -8 f: + () info@phenomenex.com China t: +8 () 8-8 f: +8 () 89-8 chinainfo@phenomenex.com Denmark t: f: + 8 nordicinfo@phenomenex.com Finland t: +8 ()9 789 f: + 8 nordicinfo@phenomenex.com France t: + () 9 f: + () 9 franceinfo@phenomenex.com Germany t: +9 ()-88- f: +9 ()-88- anfrage@phenomenex.com India t: +9 ()- f: +9 ()- indiainfo@phenomenex.com Ireland t: + () 7 f: eireinfo@phenomenex.com Luxembourg t: + ()-87 f: + ()-879 nlinfo@phenomenex.com Mexico t: f: tecnicomx@phenomenex.com The Netherlands t: + ()-87 f: + ()-879 nlinfo@phenomenex.com New Zealand t: + ()9-789 f: + ()9-789 nzinfo@phenomenex.com Norway t: +7 8 f: + 8 nordicinfo@phenomenex.com Puerto Rico t: + (8) -HPLC f: + () info@phenomenex.com Spain t: f: espinfo@phenomenex.com Sweden t: + ()8 9 f: + 8 nordicinfo@phenomenex.com United Kingdom t: + ()-7 f: + ()-79 ukinfo@phenomenex.com USA t: + () - f: + () info@phenomenex.com All other countries Corporate Office USA t: + () - f: + () info@phenomenex.com Italy t: +9 7 f: +9 7 italiainfo@phenomenex.com Phenomenex products are available worldwide. For the distributor in your country, contact Phenomenex USA, International Department at international@phenomenex.com BR9_W Terms and Conditions Subject to Phenomenex Standard Terms & Conditions, which may be viewed at Trademarks HyperClone and SecurityGuard are trademarks of Phenomenex. is a registered trademark of Thermo -Keystone. Disclaimer Phenomenex is in no way affiliated with Thermo -Keystone. Phenomenex, Inc. All rights reserved.
Without the Dry Down. Successful Bioanalytical Sample Preparation. Microelution 96-Well SPE Plates
Polymeric SPE Successful Bioanalytical Sample Preparation Without the Dry Down Microelution 96-Well SPE Plates Increase sensitivity Process small or limited sample volumes Save time and reduce costs Reduce
More informationSAMPLE PREPARATION ACCESSORIES
SAMPLE PREPARATION ACCESSORIES From Sample Processing to Laboratory Safety www.phenomenex.com/spacc Phenomenex Accessories Perfect for general lab use and sample preparation procedures. QC tested for excellence.
More informationHow Important is Performance to your SPE Method Development?
How Important is Performance to your SPE Method Development? Revolutionary Technology Performance is an important factor that plays a vital role in SPE method development because sorbent performance has
More informationThermo Scientific Dionex SolEx SPE Cartridges
CHROMATOGRAPHY Thermo Scientific Dionex SolEx SPE Cartridges Product Specifications The Thermo Scientific Dionex SolEx Solid-Phase Extraction (SPE) Cartridge line of sample pretreatment products includes
More informationSensitive Determination of Microcystins from Environmental Waters Using On-Line SPE
Sensitive Determination of Microcystins from Environmental Waters Using On-Line SPE Richard F. Jack, 1 Jeff Rohrer, 1 Xu Qun, 2 and Lina Liang 2 1 Thermo Fisher Scientific, Sunnyvale, CA, USA; 2 Thermo
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation
INTERNATIONAL STANDARD ISO 22654 First edition 2002-06-15 Footwear Test methods for outsoles Tensile strength and elongation Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la
More informationDYE QUALITY CONTROL REFERENCE MATERIAL KIT
DYE QUALITY CONTROL REFERENCE MATERIAL KIT CONTENTS I. INTRODUCTION a. MS-Directed Purification b. The Purpose of a QCRM c. What Affects Your QCRM Results II. STORAGE AND STABILITY III. RECOMMENDED USAGE
More informationRain Forest Quick Guide
Rain Forest Quick Guide Lesson 2 Cloning 1. Insert a sterile inoculation loop into the rehydrated bacterial library. Insert the loop straight into the vial and do not tilt the vial. Remove the loop and
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationDetect. React. Benefit. Increase the availability of your plants with SIMATIC Notifier!
Detect. React. Benefit. Increase the availability of your plants with! Unrestricted Siemens AG 2019 siemens.com/simatic-notifier New milestones of productivity with SIMATIC Notifier Page 2 Detect React
More informationISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts
INTERNATIONAL STANDARD ISO 505 Second edition 1999-11-15 Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts Courroies transporteuses Méthode de détermination
More informationAccuracy counts! Sensors with analog output
Accuracy counts! Sensors with analog output Company Contrinex is a leading international high-tech sensor company with headquarters in Switzerland. Contrinex offers quality and highly innovative sensing
More informationISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General
INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Récipients en verre Bagues à crans pour bouchage sous vide Partie 1: Généralités Reference
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives
INTERNATIONAL STANDARD ISO 15908 First edition 2002-12-01 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives Adhésifs pour réseaux de tuyauteries
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13938-1 First edition 1999-08-01 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Textiles Propriétés
More informationInstallation Instructions
Installation Instructions About This Document Use this document to install the 1784-PCM4/B cable. This cable connects the 1784-PCMK/B card to an SLC 5/01, 5/02, or 5/03 processor or a 1747-AIC link coupler
More information[ ACQUITY QDa DETECTOR ] SEPARATING BEYOND QUESTION BRINGING THE POWER OF MASS DETECTION TO YOU
[ ACQUITY QDa DETECTOR ] SEPARATING BEYOND QUESTION BRINGING THE POWER OF MASS DETECTION TO YOU CERTAINT Y Having the mass spectral information 30 37 HOW DID WATERS GET HERE? Years of mass Spectrometry
More informationISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods
INTERNATIONAL STANDARD ISO 7458 Second edition 2004-03-01 Glass containers Internal pressure resistance Test methods Récipients en verre Résistance à la pression interne Méthodes d'essai Reference number
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for uppers and lining Water vapour permeability and absorption
INTERNATIONAL STANDARD ISO 17699 First edition 2003-10-15 Footwear Test methods for uppers and lining Water vapour permeability and absorption Chaussures Méthodes d'essai des tiges et des doublures Perméabilité
More informationFoodstuffs - Determination of vitamin C by HPLC
Irish Standard I.S. EN 14130:2003 Foodstuffs - Determination of vitamin C by HPLC NSAI 2003 No copying without NSAI permission except as permitted by copyright law. This document was published under the
More informationISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints
INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine
INTERNATIONAL STANDARD ISO 19954 First edition 2003-10-01 Footwear Test methods for whole shoe Washability in a domestic washing machine Chaussures Méthodes d'essai s'appliquant à la chaussure entière
More informationISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed
INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation
INTERNATIONAL STANDARD ISO 22654 First edition 2002-06-15 Footwear Test methods for outsoles Tensile strength and elongation Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la
More informationget mass. without massive work. [ 3100 MASS DETECTOR ]
get mass. without massive work. [ 3100 MASS DETECTOR ] Stringent regulations, increasing demands for higher throughput, and the necessity to generate the best possible data all add to the burden of today
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Abrasion resistance
INTERNATIONAL STANDARD ISO 20871 First edition 2001-12-15 Footwear Test methods for outsoles Abrasion resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à l'abrasion Reference
More informationHigh vacuum guide FOR PRE-SEPARATORS AND CYCLONES
High vacuum guide FOR PRE-SEPARATORS AND CYCLONES High vacum guide for pre-separators and cyclones System description Nederman Pre-separation and Vacuum Transportation Systems pre-separate and discharge
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16468 March 2013 ICS 65.100.01; 67.050 English Version Food analysis - Determination of pesticide residues by GC-MS - Retention times, mass
More informationKNX The worldwide STANDARD for home and building control. KNX Association International
KNX The worldwide STANDARD for home and building control KNX Association International KNX is the Standard CENELEC EN 50090 the only European Standard for Home and Building Electronic Systems (HBES) based
More informationISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting
INTERNATIONAL STANDARD ISO 1806 Second edition 2002-12-01 Fishing nets Determination of mesh breaking force of netting Filets de pêche Détermination de la force de rupture de la maille de nappe de filet
More informationKNX The worldwide STANDARD for home and building control. KNX Association International
KNX The worldwide STANDARD for home and building control KNX Association International KNX is the Standard CENELEC EN 50090 the only European Standard for Home and Building Electronic Systems (HBES) based
More informationISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties
INTERNATIONAL STANDARD ISO 9311-1 First edition 2005-08-15 Adhesives for thermoplastic piping systems Part 1: Determination of film properties Adhésifs pour réseaux de tuyauteries en matières thermoplastiques
More informationISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular
INTERNATIONAL STANDARD ISO 9100-12 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 12: 89 regular Récipients en verre Bagues à crans pour bouchage sous vide Partie 12: 89 regular Reference
More informationPLASTICS - DETERMINATION OF THE MELT
IRISH STANDARD I.S. EN ISO 1133:2005 ICS 83.080.20 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT Tel: +353 1
More informationISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des
More informationReturn loss measurement of fiber optic components
Return loss measurement of fiber optic components Solutions Brief 815-1 How the HP 8153A/HP 81534A measure return loss of fiber optic components? The significance of return loss The introduction of new
More informationWATER QUALITY - CRITERIA FOR
STANDARD I.S. EN ISO 17994:2004 ICS 07.100.20 13.060.70 National Standards Authority of Ireland Dublin 9 Ireland WATER QUALITY - CRITERIA FOR Tel: (01) 807 3800 Fax: (01) 807 3838 ESTABLISHING EQUIVALENCE
More informationISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion
INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l
More informationFF-SR Series. FF-SR25933 Two-hand Safety Control Module FF-SR25933
Two-hand Safety Control Module FF-SR Series FEATURES Complies with the Machinery Directive 98/37/EC and UL 508 Type III C per EN 574, Category 4 per EN 954-1 Inputs for two dual-contact pushbuttons 0,5
More informationISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences
INTERNATIONAL STANDARD ISO 11683 Second edition 1997-10-01 Corrected and reprinted 1998-09-01 Packaging Tactile warnings of danger Requirements Emballages Indications tactiles de danger Exigences A Reference
More informationILNAS-EN ISO 10684:2004
Fasteners - Hot dip galvanized coatings (ISO 10684:2004) Éléments de fixation - Revêtements de galvanisation à chaud (ISO 10684:2004) Verbindungselemente - Feuerverzinkung (ISO 10684:2004) 07/2004 National
More informationPISTON-OPERATED VOLUMETRIC
IRISH STANDARD I.S. EN ISO 8655-7:2005 ICS 17.060 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE ASSESSMENT OF National Standards Authority of Ireland Glasnevin, Dublin
More informationMEPS - Micro Extraction by Packed Sorbent Online SPE for GC and LC sample preparation - Extraction to injection in a single process
- Micro Extraction by Packed Sorbent Online SPE for GC and LC sample preparation - Extraction to injection in a single process Save Hours in Sample Preparation Reduce the time to prepare and inject samples
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance
INTERNATIONAL STANDARD ISO 17707 First edition 2005-07-01 Footwear Test methods for outsoles Flex resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la flexion Reference
More informationInternational standards used locally worldwide ISO/TC 67
/ International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie
More informationISO INTERNATIONAL STANDARD. Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method
INTERNATIONAL STANDARD ISO 16032 First edition 2004-09-15 Acoustics Measurement of sound pressure level from service equipment in buildings Engineering method Acoustique Mesurage du niveau de pression
More informationPress Release. Short profile Beckhoff. Short profile February 2009 Page 1 of 6
Page 1 of 6 Short profile Beckhoff Beckhoff implements open automation systems based on PC Control technology. The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and
More informationILNAS-EN ISO :2005
Metallic materials - Vickers hardness test - Part 1: Test method (ISO 6507-1:2005) Matériaux métalliques - Essai de dureté Vickers - Partie 1: Méthode d'essai (ISO 6507-1:2005) Metallische Werkstoffe -
More informationPOSITIONERS CONTROLS ELECTRO-PNEUMATIC INTELLIGENCE FOR DOUBLE & SINGLE ACTING PNEUMATIC ACTUATORS SERIES 6A. The High Performance Company CELEBRATING
POSITIONERS ELECTRO-PNEUMATIC INTELLIGENCE CONTROLS SERIES 6A FOR DOUBLE & SINGLE ACTING PNEUMATIC ACTUATORS CELEBRATING The High Performance Company Y E A R S INTELLIGENCE Series 6A Intelligent Electro-Pneumatic
More informationSTEELS MICROGRAPHIC DETERMINATION THE APPARENT GRAIN SIZE (ISO 643:2003) IRISH STANDARD I.S. EN ISO 643:2003. Price Code
IRISH STANDARD I.S. EN ISO 643:2003 ICS 77.040.99 National Standards Authority of Ireland Dublin 9 Ireland STEELS MICROGRAPHIC DETERMINATION Tel: (01) 807 3800 Tel: (01) 807 3838 OF THE APPARENT GRAIN
More informationISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies
INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en
More informationWeishaupt WKmono 80. The next-generation burner for ratings up to kw. That s reliability
Weishaupt WKmono 80 The next-generation burner for ratings up to 17 000 kw That s reliability Weishaupt WKmono 80: The next-generation monobloc burner The powerful output offered by the new WKmono 80 burner
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 5536:2013 Milk fat products - Determination of water content - Karl Fischer method (ISO 5536:2009) EESTI STANDARDI EESSÕNA NATIONAL FOREWORD See Eesti standard EVS-EN ISO 5536:2013
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16349 April 2012 ICS 91.100.30 English Version Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in
More informationISO INTERNATIONAL STANDARD. Clothing for protection against infectious agents Test method for resistance to dry microbial penetration
INTERNATIONAL STANDARD ISO 22612 First edition 2005-03-01 Clothing for protection against infectious agents Test method for resistance to dry microbial penetration Vêtements de protection contre les agents
More informationThermo Scientific Rocket Evaporator. Revolutionary solvent evaporation complete laboratory workflow
Thermo Scientific Rocket Evaporator Revolutionary solvent evaporation complete laboratory workflow Sample evaporation with walkaway capability to produce uncompromised results The Thermo Scientific Rocket
More informationCLEANROOMS AND ASSOCIATED
STANDARD I.S. EN ISO 14698-1:2003 ICS 13.040.35 CLEANROOMS AND ASSOCIATED National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Tel: (01) 807 3838 CONTROLLED ENVIRONMENTS - BIOCONTAMINATION
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif
More informationHEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:2005) IRISH STANDARD I.S. EN ISO 10664:2005. Price Code
IRISH STANDARD I.S. EN ISO 10664:2005 ICS 21.060.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO Tel: +353 1 807 3800
More informationISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test
Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 17892-6 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Reconnaissance et
More informationdetectors UltiMate 3000 Variable Wavelength Detectors
detectors UltiMate 3000 Variable Wavelength Detectors Dionex products are UHPLC compatible by design, establishing the new standard in conventional LC. Integrating hardware, software, and separation chemistry,
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing
INTERNATIONAL STANDARD ISO 22777 First edition 2004-12-15 Footwear Test methods for accessories: Touch and close fasteners Peel strength before and after repeated closing Chaussures Méthodes d'essai pour
More informationISO INTERNATIONAL STANDARD. Footwear Test methods for accessories: Metallic accessories Corrosion resistance
INTERNATIONAL STANDARD ISO 22775 First edition 2004-12-01 Footwear Test methods for accessories: Metallic accessories Corrosion resistance Chaussures Méthodes d'essai pour accessoires: accessoires métalliques
More informationVICOTEC450 EXTRACTIVE VISIBILITY MEASURING DEVICES EXTRACTIVE VISIBILITY MEASUREMENT FOR INCREASED SAFETY IN TUNNELS
PRODUCT INFORMATION VICOTEC450 EXTRACTIVE VISIBILITY MEASURING DEVICES EXTRACTIVE VISIBILITY MEASUREMENT FOR INCREASED SAFETY IN TUNNELS Tunnel sensors EXTRACTIVE VISIBILITY MEASUREMENT FOR INCREASED SAFETY
More informationAgilent 81663A DFB Laser 8165xA Fabry-Perot Lasers
DFB Laser 8165xA Fabry-Perot Lasers Data Sheet Introduction The high power DFB Laser Source modules are best suited for optical amplifier test and DWDM system test applications. The Fabry-Perot Laser Sources
More informationPAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code
IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF
More informationSýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test
INTERNATIONAL STANDARD ISO 22476-3 First edition 2005-01-15 Geotechnical investigation and testing Field testing Part 3: Standard penetration test Reconnaissance et essais géotechniques Essais en place
More informationISO 7439 INTERNATIONAL STANDARD. Copper-bearing intra-uterine contraceptive devices Requirements, tests
INTERNATIONAL STANDARD ISO 7439 Second edition 2002-03-15 Copper-bearing intra-uterine contraceptive devices Requirements, tests Dispositifs intra-utérins contenant du cuivre Spécifications, essais Reference
More informationStolenVehicle Tracking
StolenVehicle Tracking automotive.vodafone.co.uk Vodafone Power to you Vodafone Automotive Stolen Vehicle Tracking and Monitoring Services The ultimate protection for your vehicle with European coverage
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13758-1:2002 Textiles - Solar UV protective properties - Part 1: Method of test for apparel fabrics Textiles - Solar UV protective properties - Part 1: Method of test for apparel
More informationTheoretical Background
Theoretical Background National Annexes to EN 1999 All information in this document is subject to modification without prior notice. No part or this manual may be reproduced, stored in a database or retrieval
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 15046 March 2005 ICS 71.100.50 English version Wood preservatives - Artificial weathering of treated wood prior to biological testing - UV-radiation
More informationSterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO :2009)
Standard Recommendation S.R. CEN ISO/TS 17665-2:2009 Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO 17665-2:2009) NSAI 2009 No copying without
More informationSolid Phase Extraction using the 96-well Format ISOLUTE -96 Fixed Well Plates and ISOLUTE Array 96-well Plates
TN114 Solid Phase Extraction using the 96-well Format ISOLUTE -96 Fixed Well Plates and ISOLUTE Array 96-well Plates New approaches to the quantitation of drugs and metabolites in biological fluids have
More informationA WMIA Partner of the Year Winner S-Series Enclosureless Dust Collector
A WMIA Partner of the Year Winner S-Series Enclosureless Dust Collector Nederman S-Series BR-11112-0323 The S-Series up to 5,000 CFM Suitable for collection of many different types of dust including wood,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 10664:2005 Hexalobular internal driving feature for bolts and screws Hexalobular internal driving feature for bolts and screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL
More informationHydra-D. Ultra-high purity desiccant air dryers. Engineering GREAT Solutions
Hydra-D Ultra-high purity desiccant air dryers Engineering GREAT Solutions 02 Hydra-D Contents 03 Our capability 04 Hydra-D The solution 05 Hydra-D How it works 06 Hydra-D Features 07 Technical data Engineering
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CLC/TS 50625-3-1 January 2015 ICS 29.100.01; 13.030.99; 31.220.01 English Version Collection, logistics & treatment requirements
More informationForeword. A completely revised report for quicker and easier access to key information
2017 Foreword A completely revised report for quicker and easier access to key information Following a completely revised edition in 2016, we introduce the 2017 DIY / Home Improvement Global Report. We
More informationCOPYRIGHT Danish Standards. NOT FOR COMMERCIAL USE OR REPRODUCTION. DS/EN :1999
EUROPEAN STANDARD EN 50134-2 NORME EUROPÉENNE EUROPÄISCHE NORM May 1999 ICS 13.320 English version Systèmes d'alarme Systèmes d'alarme sociale Partie 2: Déclencheurs Alarm systems - Social alarm systems
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 873:2000 Dental gypsum products Dental gypsum products EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN ISO 873:2000 sisaldab Euroopa
More informationLeading manufacturer of high-end ball valves and pneumatic actuators. Over 60 years experience with industrial applications
Company profile Leading manufacturer of high-end ball valves and pneumatic actuators Over 60 years experience with industrial applications We develop, manufacture and market our products HABONIM tailor-made
More informationThe advantages of closed heating systems. White paper
The advantages of closed heating systems White paper Flamco B.V. December 2016 Closed versus open Heating Systems Heating and cooling installation use water for the energy transfer because it s the most
More informationSignal converters SVE4 Product overview
Signal Converters SVE4 Signal converters SVE4 Product overview Signal input range 0 10 V, 0 20 ma or for position sensors SMH-S1-HG Switch output 2x PNP or 2x NPN Switching function freely programmable
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 20127:2005 Dentistry - Powered toothbrushes - General requirements and test methods Dentistry - Powered toothbrushes - General requirements and test methods EESTI STANDARDIKESKUS
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 143:2000 Hingamisteede kaitsevahendid. Tahkete osakeste filtrid. Nõuded, katsetamine, märgistus Respiratory protective devices - Particle filters - Requirements, testing, marking
More informationBeckhoff short profile
Beckhoff short profile Beckhoff implements open automation systems based on PC Control technology The product range covers Industrial PCs, I/O and Fieldbus Components, Drive Technology and automation software
More informationISO INTERNATIONAL STANDARD. Geosynthetics Determination of friction characteristics Part 2: Inclined plane test
INTERNATIONAL STANDARD ISO 12957-2 First edition 2005-02-15 Geosynthetics Determination of friction characteristics Part 2: Inclined plane test Géosynthétiques Détermination des caractéristiques de frottement
More informationThis document is a preview generated by EVS
TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16829 August 2016 ICS 13.220.40; 13.230; 53.040.10 English Version Fire and explosion prevention and protection for bucket elevators Prévention
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-24110-0 SANS 50354:2003 EN 354:2002 SOUTH AFRICAN NATIONAL STANDARD Personal protective equipment against falls from a height Lanyards This national standard is the identical implementation
More informationTelematics Services. Vodafone Power to you. Vehicle Security and Remote Management in the palm of your hand. automotive.vodafone.
Telematics Services Vehicle Security and Remote Management in the palm of your hand automotive.vodafone.com Vodafone Power to you Vodafone Connex Stolen Vehicle Tracking and Monitoring Services The ultimate
More informationInternational Standard 787/11
International Standard 787/11 INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWlE~YHAPO~HAR OPTAHM3AlJMR I-IO CTAH~APTbl3AL&lM.ORGANlSATlON INTERNATIONALE DE hjormallsation General methods of test for pigments
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 3549:2003 Zinc dust pigments for paints - Specifications and test methods Zinc dust pigments for paints - Specifications and test methods EESTI STANDARDIKESKUS EESTI STANDARDI
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN ISO 10715:2000 Natural gas - Sampling guidelines Natural gas - Sampling guidelines EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti standard EVS-EN ISO
More informationFuture development of the furniture industry A look at the next 3-5 years
Tappi-Symposium at interzum 2007 on May 7, 2007 Future development of the furniture industry A look at the next 3-5 years Dirk-Uwe Klaas - Managing Director Hauptverband der Deutschen Holzindustrie e.v.
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14132:2009 Foodstuffs - Determination of ochratoxin A in barley and roasted coffee - HPLC method with immunoaffinity column clean-up EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13829:2001 Thermal performance of buildings - Determination of air permeability of buildings - Fan pressurization method Thermal performance of buildings - Determination of air permeability
More informationLabeling and Identification Products
Labeling and Identification Products 25 Year System Performance Coverage* We are confident that your AMP NETCONNECT cabling system will keep performing to current TIA/EIA industry standards. If the registered
More information