9533, 9534, 9535, 9537 Shower Curtain Model 9535 & 9537 Antimicrobial Shower Curtain

Transcription

1

2

3 Model 933 Antimicrobial Vinyl Shower Curtain (White) Bradex Model 934 Duck Shower Curtain (White) Model 9 Antimicrobial Shower Curtain (Green) Model 937 Antimicrobial Shower Curtain (White) Bradex Model 933 Antimicrobial Vinyl Shower Curtain Guide Specification Shower curtain 6 gauge vinyl material with hemmed top edges and aluminum grommets on 6 centers. White only. Vinyl Shower Curtain Model 933 is available in widths of 36", ", ", 6", or 72" and heights of either 72" or 78". See charts below for dimensional information. Model 934 Duck Shower Curtain Guide Specification Shower curtain is 8-oz. 1% cotton duck material with hemmed top edges and chromeplated nickel grommets on 6" centers. White only. Duck Shower Curtain shall be Bradley Model 934 is available in widths of 36", ", ", 6", or 72" and heights of either 72" or 78". See charts below for dimensional information. Model 933 and Model 934 Shower Curtains have a tolerance of +/- 2" length and +/- 2" width, top edge hemmed. 933 Models Bradex Width Height Overall Dimensions (Inches) Overall Dimensions (Millimeters) Orders composed of products indicated as Bradex will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley. Page 1 of 1 4/6/217 This information is subject to change without notice. Bradley_ShowerCurtain_933_34 37 # of 936 Shower Hooks Required (Order Separately) 36" (914 mm) 72" (1829 mm) 36 x x " (167 mm) 72" (1829 mm) x x " (1219 mm) 72" (1829 mm) x x " (124 mm) 72" (1829 mm) 6 x x " (1829 mm) 72" (1829 mm) 72 x x Models Width Height Overall Dimensions (Inches) Overall Dimensions (Millimeters) # of 936 Shower Hooks Required (Order Separately) 36" (914 mm) 72" (1829 mm) 36 x x " (167 mm) 72" (1829 mm) x x " (1219 mm) 72" (1829 mm) x x " (124 mm) 72" (1829 mm) 6 x x " (1829 mm) 72" (1829 mm) 72 x x and 937 Width Tolerances Width 933, 934, 9, 937 Shower Curtain Model 9 & 937 Antimicrobial Shower Curtain Guide Specification Shower curtain is 9-oz. nylon-reinforced antimicrobial PVC vinyl fabric (flameproof, stain resistant, self-deodorizing) and furnished with aluminum grommets on 6" centers. Shower curtain is.14" thick with top edge hemmed. Ideal for hospital applications. Model 9 is Green. Model 937 is White. Antimicrobial Shower Curtain Model 9 and 937 is available in widths of 36", ", ", 6", or 72" and heights of either 72" or 78". See charts below for dimensional information. Tolerance 36" (914mm) +/- 2" " (167 mm) +/-2" " (1219 mm) +/-2" 6" (124 mm) +/-2" 72" (1829 mm) +/-2" Length tolerance is +/-2" 9 Models Width Height Overall Dimensions (Inches) Overall Dimensions (Millimeters) # of 936 Shower Hooks Required (Order Separately) 36" (914 mm) 72" (1829 mm) 36 x x " (167 mm) 72" (1829 mm) x x " (1219 mm) 72" (1829 mm) x x " (124 mm) 72" (1829 mm) 6 x x " (1829 mm) 72" (1829 mm) 72 x x Models Bradex Width Height Overall Dimensions (Inches) Overall Dimensions (Millimeters) # of 936 Shower Hooks Required (Order Separately) 36" (914 mm) 72" (1829 mm) 36 x x " (167 mm) 72" (1829 mm) x x " (1219 mm) 72" (1829 mm) x x " (124 mm) 72" (1829 mm) 6 x x " (1829 mm) 72" (1829 mm) 72 x x Bradley P.O. Box 39, Menomonee Falls, WI BRADLEY (8 272 ) bradleycorp.com

4 936, 94 Shower Curtain Hook Model 936 Shower Curtain Hook Bradex Model 94 Shower Curtain Hook with Rollers Bradex Product Materials Model 936 Shower Curtain Hook: stainless steel spring wire with snap fastener. Can be used with 1" and 1¼" diameter curtain rods. Model 94 Shower Curtain Hook with Rollers: stainless steel wire with snap fastener. Rollers are brass with nickel plating. Five rollers per hook. Can be used with 1" and 1¼" diameter curtain rods. 3" (76mm) 3 1 8" (79mm) " (mm) Model " (mm) Model 94 Orders composed of products indicated as Bradex will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley. Page 1 of 1 4/1/21 This information is subject to change without notice. Bradley_ShowerCurtainHooks_936_4 21 Bradley P.O. Box 39, Menomonee Falls, WI BRADLEY (8 272 ) bradleycorp.com

5 93 Shower Curtain Rod Swiveling Mounting System Accommodates 6" or 72" Shower Stall Increases Space in Shower Stall Model 93-6 (6") Bradex Model (72") NOTE: Curtain rods only available in 6" or 72" lengths. Product Materials SWIVEL BRACKETS: chrome-plated zinc die cast construction with exposed surfaces in archi tec tural satin finish. Maximum degree swivel rotation. TUBING: 1" diameter stainless steel, seamless con struc tion with exposed surfaces in architectural satin finish. Installation Verify all rough-in dimensions prior to installation. Screws and anchors provided with swivel brackets. For additional installation instructions, visit bradleycorp.com. When retrofitting or replacing a straight shower rod with Model 93 curved shower rod, mount the new flange at the same location as the old flange. This will maximize the additional space a curved shower rod is designed to provide. If properly mounted, the shower rod will withstand a maximum load of lbs. without any sign of a permanent deflection. Optional Features Feature Suffix Bright Polished Finish -78 Swivel brackets exposed surfaces are in satin finish. Guide Specification Shower curtain rod shall be fabricated of 2 gauge stainless steel in satin finish. 6 8" (169 mm) 6 8" (169 mm) 6" (124 mm) Model " (1829 mm) Model Wall Machine Screw Set Screw Shower Rod Swivel Bracket Mounting Bracket Orders composed of products indicated as Bradex will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley. Page 1 of 1 3/14/212 This information is subject to change without notice. Bradley_ShowerCurtainRod_93 Mounting Screw 21 Bradley P.O. Box 39, Menomonee Falls, WI BRADLEY (8 272 ) bradleycorp.com

6 938, 9 Shower Curtain Rod Concealed Mounting Model 938 1" O.D. (36" Long) Bradex (" Long) Bradex (" Long) Bradex (6" Long) Bradex (72" Long) Bradex Model 9 1-1/4" O.D. (36" Long) Bradex (" Long) (" Long) Bradex (6" Long) Bradex (72" Long) L For 72" lengths and greater, model 922 Shower Rod Ceiling Support is required! Must specify distance from the ceiling! Product Materials FLANGES: glass polypropylene, 3 1 8" dia. Shower rod support sleeves formed with flange as one piece. ESCUTCHEONS: 22 gauge stainless steel. One-piece drawn con struction with exposed surfaces in architectural satin finish. Snap over flanges to conceal mounting screws. TUBING: 18 gauge stainless steel, seamless con struc tion with exposed surfaces in architectural satin finish. Installation Verify all rough-in dimensions prior to installation. To properly engage rod in support sleeves, rod length must be no less than ap prox i mate ly ¼" shorter than wall opening. Secure one flange to wall with mounting screws (included) at holes provided. Align mounting holes vertically. Slip opposite flange and both escutcheons into place. Secure flange to wall and snap escutcheons over mounting flanges. Optional Features Feature Suffix Bright polished finish -4 FLANGE (CONCEALED) (2) - ¼ x 2½" HEX HD. LAG BOLT ESCUTCHEON (SNAP ON TYPE) WALL SHOWER ROD Guide Specification Concealed mounted shower rod shall be fab ri cat ed of 18 gauge stainless steel of seamless construction. Mounting flanges shall be of glass polypro py lene with snap-on vandal-resistant protective es cutch eons. Orders composed of products indicated as Bradex will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley. Page 1 of 1 3/3/217 This information is subject to change without notice. Bradley_ShowerCurtainRod_938_ 217 Bradley P.O. Box 39, Menomonee Falls, WI BRADLEY (8 272 ) bradleycorp.com

7 7 Waste Receptacle Model 7 Surface-Mounted Bradex 6.-gallon Capacity Product Materials RECEPTACLE: 22 gauge stainless steel with exposed surfaces in architectural satin finish. All welded con struc tion with rounded front corners. LINER: (optional) heavy-duty stitched vinyl-coated nylon. HINGED COVER: (optional) 22 gauge stainless steel with exposed surfaces in architectural satin finish. Heavy-duty stainless steel piano hinge. Capacity 6. gal. (.9 cu. ft.) Operation Optional vinyl liner is attached to receptacle with hook-and-loop fasteners, easily removed for servicing. Installation Verify all rough-in dimensions prior to installation. Secure to wall with mounting screws (not included) at holes provided. Mounting kits available through Bradley (ref. #899-27). Optional Features Feature Suffix Hinged cover - Vinyl Liner Part #P11-7 Guide Specification Surface-mounted waste receptacle shall be fabricated of 22 gauge stainless steel with seamless exposed surfaces in satin finish. Reusable heavy-duty vinyl liner (optional). Receptacle holds 6. gal. Overall dimensions: 14"W x 18"H x 6"D. ADA Compliant Consult local and national accessibility codes for proper installation guidelines. Conformity and compliance to local and national codes is the responsibility of the installer. Orders composed of products indicated as Bradex will be available to ship in three days after receipt of order at the factory. There is no pricing penalty for this service from Bradley. Page 1 of 1 3/17/214 This information is subject to change without notice. Bradley_WasteReceptacle_7 18" (47mm) 14" (6mm) Hinged Cover Dim. "A" Key Surface: Waste receptacle top lip to finished floor Rough wall opening: Surface Mount: 6" (12mm) Dim. "A" to finished floor 1½" (38mm) 3" (76mm) Typ. (4) Mounting Holes 1½" (38mm) Typ. For Dim. "A" Top of Unit Bottom of Unit 36" (914mm) 36" (914mm) 18" (47mm) " (813mm) " (813mm) 14" (6mm) 28" (711mm) 28" (711mm) 1" (24mm) No rough wall opening, see overall dimensions 214 Bradley P.O. Box 39, Menomonee Falls, WI BRADLEY (8 272 ) bradleycorp.com

8 SPECIFICATIONS PRODUCT SPECIFICATIONS Halsey Taylor Wall Mount Bi-Level GreenSpec ADA Cooler, Filtered 8 GPH Stainless. Chilling Capacity of 8. GPH (gallons per hour) of F drinking water, based on 8 F inlet water and 9 F ambient, per ASHRAE 18 testing. Features shall include Energy Savings, Filtered. Furnished with Double Bubbler. Mechanical Front And Side Bubbler Pushbar activation. Product shall be Wall Mount (On- Wall), for Indoor applications, serving 2 station(s). Unit shall be certified to UL 9 and CAN/CSA C22.2 No. 12. Unit shall be leadfree design which is certified to NSF/ANSI 61 & 372 (lead free) and meets Federal and State low-lead requirements. Halsey Taylor Wall Mount Bi-Level GreenSpec ADA Cooler Filtered 8 GPH Stainless Model HACG8BLSS-WF Special Features: Energy Savings, Filtered Finish: Stainless Steel Power: 11V/6Hz Bubbler Style: Double Bubbler Activation by: Mechanical Front And Side Bubbler Pushbar Mounting Type: Wall Mount (On-Wall) Chilling Option*: 8. GPH Full Load Amps 4. Dimensions (L x W x H): 21" x 21" x 38" Approx. Shipping Weight: 97 lbs. Installation Location: Indoor No. of Stations Served: 2 *Based on 8 F inlet water & 9 F ambient air temp for F chilled drinking water. Mechanically-Activated bubbler continues to supply water in event of service disruptions. Filter is certified to NSF and 3 for lead, particulate, chlorine, taste and odor reduction. 1, gal. capacity. Energy-Savings Feature - allowing for the refrigeration to be powered off when not in use. Exclusive Double Bubbler which projects two separate streams that converge to form a fuller, more satisfying drink. COOLING SYSTEM Compressor: Hermetically-sealed, reciprocating type, single phase. Sealed-in lifetime lubrication. Condenser: Fan cooled, copper tube with aluminum fins. Fan motor is permanently lubricated. Cooling Unit: Combination tube-tank type. Continuous copper tubing with is fully insulated with EPS foam that meets UL requirements for self-extinguishing material. Refrigerant Control: Refrigerant R-134a is controlled by accurately calibrated capillary tube. Temperature Control: Easily accessible enclosed adjustable thermostat is factory preset. Requires no adjustment other than for altitude requirements. PART: QTY: PROJECT: CONTACT: DATE: NOTES: APPROVAL: AMERICAN PRIDE. A LIFETIME TRADITION. Like your family, the Elkay family has values and traditions that endure. For almost a century, Elkay has been a family-owned and operated company, providing thousands of jobs that support our families and communities. Included with Product: PRODUCT COMPLIANCE ADA Buy American Act CAN/CSA C22.2 No. 12 Water Cooler, Filter NSF/ANSI, 3, 61, and 372 (lead free) UL 9 Installation Instructions (PDF) Year Limited Warranty on the refrigeration system of the unit. Electrical components and water system are warranted for 12 months from date of installation. Warranty pertains to drinking water applications only. Non-drinking water applications are not covered under warranty. Warranty (PDF) OPTIONAL ACCESSORIES 897C - WaterSentry VII Replacement Filter (Coolers + Fountains) MLP2 - Accessory - In Wall Carrier (Bi-Level) 984C - Accessory - Cane Apron for HAC, HVR, EMABF & VRC Models (Stainless) 9682CA - Accessory - Glass Filler Kit In keeping with our policy of continuing product improvement, Halsey Taylor reserves the right to change product specifications without notice. Please visit Halseytaylor.com for the most current version of Halsey Taylor product specification sheets. This specification describes a Halsey Taylor product with design, quality, and functional benefits to the user. When making a comparison of other producers offerings, be certain these features are not overlooked. Halsey Taylor REV Camden Court 217 Page 1 of 2 HACG8BLSS-WF Oak Brook, IL 623 HACG8BLSS-WF_spec.pdf

9 SPECIFICATIONS Halsey Taylor Wall Mount Bi-Level GreenSpec ADA Cooler Filtered 8 GPH Stainless Model HACG8BLSS-WF In keeping with our policy of continuing product improvement, Halsey Taylor reserves the right to change product specifications without notice. Please visit Halseytaylor.com for the most current version of Halsey Taylor product specification sheets. This specification describes a Halsey Taylor product with design, quality, and functional benefits to the user. When making a comparison of other producers offerings, be certain these features are not overlooked. Halsey Taylor REV Camden Court 217 Page 2 of 2 HACG8BLSS-WF Oak Brook, IL 623 HACG8BLSS-WF_spec.pdf

10

11

12 Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The 6" Wafer-Thin LED recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light housing for competitive affordability. This innovative wafer-slim Type IC design allows easy installation for new construction or remodel from below the ceiling without the requirement of a pot light housing. The LED module maintains at least 7% light output for 36, hours. These LED Wafer downlights are intended for closets, attics, hallways, bathrooms, kitchens, basements, soffits, entry ways, porches, garages, stairwells, corridors, nursing/retirement homes, condos, elevators, apartments, and any other small areas. CONSTRUCTION Ideal for shallow ceiling plenum since a pot light housing is NOT required. IC rated driver and fixture - approved for direct contact with insulation. Aluminum die cast outer frame. Durable, powder coat paint to prevent rust. Round fixture with integral edge-lit LED's. Steel spring clip for easy installation. Plenum rated cable connector to connect from module to remote driver box. Isolated driver integrated inside steel remote box with four 7/8" knockouts with slots for pryout. Not suitable for pulling wires. PATENT PENDING. INSTALLATION Ideal for shallow ceiling plenum; no housing required. Steel spring clip for easy installation. 6" cut out template is provided to ensure a correct sized hole is cut into ceiling for proper installation of the trim. Size of hole should not exceed 6 1/4 inches for this product. Suitable for installation in t-grid and drop ceiling applications. OPTICS Wafer-Thin downlight edge-lit LED technology uses light guided plate to distribute light. Polycarbonate lens provides even illumination throughout the space. Utilized 3K and 4K color temperature LEDs. ELECTRICAL Connect directly to 12V power supply via provided UL recognized driver. High efficient driver with power factor >.9. Ambient operating temperature: -4 F (-4 C) to +14 F (+4 C). Dimming down to 1% (See page 2 for recommended dimmers). Standard input wattage is 13W, 79 lumens per watt. LISTINGS CSA certified to US and Canadian safety standards. ENERGY STAR certified product. Wet location. Air Tight certified in accordance with ASTM E WARRANTY -year limited warranty. Complete warranty terms located at: Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 2 C. Specifications subject to change without notice. Notes Type Wafer LED Recessed Downlight WF6 6" LED Module IC/Non-IC New Construction/Remodel DIMMABLE Matte black Brushed nickel Oil-rubbed bronze Specifications Aperture: 4.9 (12.4) Ceiling opening: 6 (1.2) Overlap trim: 6.7 (17) Height: 1.1 (2.8) All dimensions are inches (centimeters) unless otherwise indicated..9" (12.4) 4.9" (12.4) 6.7" (17.) 1.1" (2.8) ORDERING INFORMATION For shortest lead times, configure product using standard options (shown in bold). Example: WF6 LED 3K MW WF6 Series Lamp CCT/CRI/W/Lumens 1 Finish WF6 6" wafer-thin LED downlight LED LED 3K 3K/8CRI/13W/12L MW 4K 4K/8CRI/13.6W/12L MB BN LL LED Low Lumen LED 27K 27K/8CRI/12.7W/78L ORB 3K 3K/8CRI/12.6W/86L 4K 4K/8CRI/12.9W/944L Matte white Matte black Brushed nickel Oil-rubbed bronze Accessories: Order as separate catalog number. WF6 PAN R12 6" new construction pan, retail pack of 12 WFJB R4 Remodel joist bar, retail pack of 4 WFEXC6 U 6' FT4 cable WFEXC1 U 1' FT4 cable WFEXC2 U 2' FT4 cable WF6_Pan Joist Extension Cable Notes 1 Total system delivered lumens. DOWNLIGHTING WF6

13 WF6 6" LED Wafer Module PHOTOMETRICS Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 3 Above Floor for a Single Luminaire WF6 LED 3K, 3 K LEDs, input watts: 13, delivered lumens: 12, LM/W=78., test no. ISF Ave Lumens Zone Lumens % Lamp *1 *Efficiency Coefficients of Utilization pf 2% pc 8% 7% % pw % 3% 1% % 3% 1% % 3% 1% RCR Mounting Height % beam % beam Inital FC Center Beam Diameter FC Diameter FC WF6 LED 4K, 4 K LEDs, input watts: 13.6, delivered lumens: 12, LM/W=88.2, test no. ISF Ave Lumens Zone Lumens % Lamp *1 *Efficiency Coefficients of Utilization pf 2% pc 8% 7% % pw % 3% 1% % 3% 1% % 3% 1% RCR Mounting Height % beam % beam Inital FC Center Beam Diameter FC Diameter FC WF6 LL LED 27K, 27 K LEDs, input watts: 12.7, delivered lumens: 819, LM/W=64.4, test no. ISF 78P Ave Lumens Zone Lumens % Lamp *1 *Efficiency RCR pf 2% pc 8% 7% % pw % 3% 1% % 3% 1% % 3% 1% Mounting Height % beam % beam Inital FC Center Beam Diameter FC Diameter FC WF6 LL LED 3K, 3 K LEDs, input watts: 12.6, delivered lumens: 86, LM/W=68.7, test no. ISF Ave Lumens Zone Lumens % Lamp *1 *Efficiency RCR Coefficients of Utilization pf 2% pc 8% 7% % pw % 3% 1% % 3% 1% % 3% 1% Mounting Height % beam % beam Inital FC Center Beam Diameter FC Diameter FC WF6 DOWNLIGHTING: One Lithonia Way, Conyers, GA 312 Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 6/14/17

14 WF6 6" LED Wafer Module WF6 LL LED 4K, 4 K LEDs, input watts: 12.9, delivered lumens: 944, LM/W=73.2, test no. ISF Ave Lumens Zone Lumens % Lamp *1 *Efficiency RCR Coefficients of Utilization pf 2% pc 8% 7% % pw % 3% 1% % 3% 1% % 3% 1% Mounting Height % beam % beam Inital FC Center Beam Diameter FC Diameter FC ENERGY DATA & DIMMING CAPABILITY 6" ENERGY DATA Color Temperature 3K 4K Lumens CRI 8 8 Lumens/Watt Min. starting temperature -4 C (-4 F) -4 C (-4 F) EMI/RFI FCC Title CFR, Part 1, Class B FCC Title CFR, Part 1, Class B Sound rating Class A Standards Class A Standards Input voltage 12V 12V Total Harmonic Distortion 17.9% 17.9% Min. power factor Input frequency /6 Hz /6 Hz Rated wattage 13W 13.6W Input power 13W 13.6W Input current.11a.11a 6" LOW LUMEN ENERGY DATA Color Temperature 27K 3K 4K Lumens CRI Lumens/Watt Min. starting temperature -4 C (-4 F) -4 C (-4 F) -4 C (-4 F) EMI/RFI FCC Title CFR, Part 1, Class B FCC Title CFR, Part 1, Class B FCC Title CFR, Part 1, Class B Sound rating Class A Standards Class A Standards Class A Standards Input voltage 12V 12V 12V Total Harmonic Distortion 12% 1.% 11.6% Min. power factor Input frequency /6 Hz /6 Hz /6 Hz Rated wattage 12.7W 12.6W 12.9W Input power 12.7W 12.6W 12.9W Input current.11a.11a.11a COMPATIBLE DIMMERS Insteon Leviton Lutron Sensorswitch Synergy/Leviton 27D 6633-PA CTCL-13P-WH nsp PCD 2W ISD 6 I 12/IPI6 IPL6-LED/INC mode DV-63P-LA nsp PCD ELV 12 ISD 4 ELV 12/IPE4 661-P CT-63PR-WH DVELV-3P NTELV-3P NLV6 3P-SELV DV-6P AYCL-13P-WH CTCL-13P-WH WF6 DOWNLIGHTING: One Lithonia Way, Conyers, GA 312 Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 6/14/17

15 WF6 6" LED Wafer Module LIGHTING FACTS WF6 DOWNLIGHTING: One Lithonia Way, Conyers, GA 312 Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 6/14/17

16 Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE Emergency Lighting Micro Inverter works in conjunction with a fluorescent or LED fixture to create an emergency lighting system. The inverter operates a maximum load of 2 to 2W at unity power factor. It allows the connected fixtures to be on, off, switched or dimmed without affecting emergency operation. The Inverter provides power to the input side of the fixture, including the ballast, and can be used with indoor or outdoor emergency fixture applications. CONSTRUCTION Steel case, with a single pole (Momentary) test switch and pilot light. ELECTRICAL Lamp compatibility: LED, and fluorescent. Single Pole (Momentary) test switch and pilot light. 23" of armored cable. Input: 12V or 277V Output: 12V/277V Auto select, 6Hz BATTERY High-temperature maintenance free nickel-cadmium battery, charger and electronic circuitry constructed in a steel case. 24 hour recharge. INSTALLATION The inverter does not affect normal fixture operation and may be used switched or un-switched. Line voltage allows for remote mounting up to 2 feet maximum. Back mount only. LISTINGS Underwriters Laboratories in accordance with the standards set forth in UL 924, Emergency Lighting and Power Equipment, and by the Canadian Standards Association (CSA) in accordance with the standards set forth in C22.2 No. 141, Unit Equipment for Emergency Lighting. The EAC ISSM 2WB 12/277 is UL Listed and CSA Certified for field installation. Emergency illumination time exceeds the National Electrical Code (NEC), Life Safety Code (NFPA- LSC), National Building Code of Canada (NBC), National Fire Code of Canada (NFC) and UL 9-minute requirements. UL and CSA 2W ( C to C) F to 122 F UL only 2W ( C to 4 C) F to 113 F) WARRANTY -year limited warranty. Complete warranty terms located at Note: Actual performance may differ as a result of end-user environment and application. Specifications subject to change without notice. Type Specifications Length: 16.6 Depth: 2.8 Height: 2.8 Weight: lbs. EAC ISSM AC Power System ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: EAC ISSM 2WB 12/277 EAC ISSM 2WB 12/277 Series System VA rating Voltage EAC Emergency AC power system ISSM Interruptible 2WB 12/277 EMERGENCY EAC ISSM 2WB

17 EAC ISSM Interruptible Power System SPECIFICATIONS Electrical Specifications Rating Input voltage Output watts 2WB WB MOUNTING All dimensions are inches (centimeters) unless otherwise indicated. 2.8" 16.6" Notes 1 At 77 F (2 C). 2 All life safety equipment, including emergency lighting for path of egress, must be maintained, serviced and tested in accordance with all National Fire Protection Association (NFPA) and local codes. Failure to perform the required maintenance, service or testing could jeopardize the safety of occupants and will void all warranties. 3 Optimum ambient temperature range where unit will provide capacity for 9 minutes. Higher and lower temperatures affect life and capacity. Consult factory for detailed information. 2.8" 16." EAC ISSM 2WB EMERGENCY: One Lithonia Way, Conyers, GA 312 Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 3/1/16

18 Catalog Number Notes FEATURES & SPECIFICATIONS INTENDED USE For wall or ceiling mounting, vertical or horizontal. The WL combines digital LED lighting and controls technologies with high-performance optical design to offer the most advanced wall-mount luminaire for general ambient lighting applications. High-efficacy light engine delivers long life and excellent color, ensuring a superior quality lighting installation that is highly efficient and sustainable. CONSTRUCTION Housing is roll formed from code-gauge steel. Refractor is retained in die cast ends providing secure installation and easy maintenance. Decorative die-cast end caps provide added durability. Finish: All metal parts are post-painted in white polyester powder coat for smooth, finished edges and uniform light distribution. OPTICS Impact modified linear faceted refractor. Optically engineered for superior light distribution and maximum efficacy. Crescent-shape linear faceted refractor system obscures and integrates individual LED images and uniformly washes fixture surface with light. ELECTRICAL Long-life LEDs, coupled with high-efficiency drivers, provide superior quantity and quality of illumination for extended service life. 9% LED lumen maintenance at 6, hours (L9/6,). The LEDs have a CRI of 82. eldoled driver options deliver choice of dimming range and choice for control, while assuring flicker-free, low-current inrush, 89% efficiency and low EMI. Driver disconnect provided where required to comply with US and Canadian codes. Optional nlight embedded controls continuously monitor system performance and allow for constant lumen management function. Lumen Management: Unique lumen management system (option N8) provides onboard intelligence that actively manages the LED light source so that constant lumen output is maintained over the system life, preventing energy waste created by the traditional practice of over-lighting. SENSOR Integrated sensor (individual control): Sensor Switch MSD7 (Passive Infrared (PIR)) integrated occupancy sensor photocell allows the luminaire to power off when the space is unoccupied. See page 4 for more details on the integrated sensor. Integrated Sensor (nlight Wired Networking): The sensor is nlight-enabled, meaning it has the ability to communicate over an nlight network. When wired using CAT- cabling with other nlight-enabled sensors, power packs, or WallPods, an nlight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software. See page 4 for the nlight sensor options. Interated Smart Sensor (nlight AIR Wireless Platform): The res7 sensor is nlight AIR enabled, meaning it has the ability to communicate over the wireless nlight control platform. It is both digital PIR occupancy sensor and automatic dimming photocell. It pairs to other luminaires and wall switches through our mobile app, CLAIRITY, which allows for simple sensor adjustment. See page 4 for more details on the Integrated Smart Sensor. XPoint Wireless Networking: XPoint Wireless technology creates a mesh network to ensure communication between fixtures, sensors, and wall stations facility wide. This option provides superior lighting management capabilities including granular control, configuration, and custom grouping. This option enables sensors that detect motion to wirelessly communicate to neighboring fixtures whether on different floors in a stairwell, to a corridor or hallway illuminating the desired path. LISTINGS CSA certified to meet U.S. and Canadian standards. Suitable for damp location (excluding sensor option). Patents pending. DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. WARRANTY -year limited warranty. Complete warranty terms located at: NOTE: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 2 C. Specifications subject to change without notice. Type Wall bracket & Surface Mount LED WL4 4' LED Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning. All configurations of this luminaire meet the Acuity Brands specification for chromatic consistency This luminaire is part of an A+ Certified solution for nlight or XPoint Wireless control networks when ordered with drivers marked by a shaded background* To learn more about A+, visit *See ordering tree for details LED WL4-LED

19 WL4 Wall Bracket & Surface Mount LED A+ Capable options indicated by this color background. ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: WL4 3L EZ1 LP84 WL4 Series Lumens 1 Voltage Driver Color temperature Controls WL4 4' wall-mount LED 2L 2 lumens 3L 3 lumens 4L 4 lumens (blank) MVOLT 3 3V EZ1 eldoled dims to 1%, -1V EZB eldoled dims to dark, -1V LP83 LP8 LP84 LP8 3 K K 4 K K (blank) No nlight N8 nlight with 8% lumen management N8EMG nlight with 8% lumen management for use with generator supply EM power 2 N1 nlight without lumen management N1EMG nlight without lumen management for use with generator supply EM power 2 NLTAIR nlight AIR enabled 3 Occupancy control 4 Standby mode 8 Options Finish 1 (blank) No sensor control nlight Wired Networking NES7 nlight nes 7 PIR integral occupancy sensor NESPDT7 nlight nes PDT 7 dual technology integral occupancy control NES7ADCX nlight nes 7 ADCX PIR integral occupancy sensor with automatic dimming photocell Individual Control MSD7 Sensor Switch MSD 7 PIR Integral Occupancy Control 6 Xpoint Wireless XADS7 XPoint wireless controller and micro 36 PIR occupancy and photocell sensor 7 XADNS7 XPoint å wireless controller and micro 36 PIR occupancy and photocell sensor (egress lighting) 7 nlight Wireless Networking RES7N nlight AIR PIR integral occupancy sensor with automatic dimming photocell for Networking Capabilities nlight Wireless Zone RES7Z nlight AIR PIR integral occupancy sensor with automatic dimming photocell for zone control (blank) Fixture turns off when unoccupied DIM1 Fixture dims to approximately 1% light output when unoccupied DIM Fixture dims to approximately % light output when unoccupied EL7L EL14L SC LED Emergency battery pack (nominal 7 lumens); see Life Safety section 9 LED Emergency battery pack (nominal 14 lumens); see Life Safety section 9 Surface conduit end cap provisions (blank) White Notes 1 Approximate lumen output. 2 nlight EMG option requires a connectio nto existing nlight network. Power is provided from a separate N8 or N1 enabled fixture 3 Must order with RES7N or RES7Z sensor. Only availble with EZ1 driver. 4 See sensor options on page 3. Requires N8, N1, N8EMG, or N1EMG. Cannot be ordered with EZB and EL7L or EL14L together. 6 Not available with nlight options or EZB. 7 Not available with nlight options or Standyby Mode. Gateway not included. Requires on-site commissioning. Visit for more information. 8 Requires Occupancy Control. 9 Not available with 3V. Cannot be ordered with 4L, EZB, and sensor combination. 1 For additional paint finishes, refer to Architectural Colors. WL4-LED LED: One Lithonia Way Conyers, GA 312 Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 6/29/17

20 WL4 Wall Bracket & Surface Mount LED nlight Wired Control Accessories: Order as separate catalog number. Visit WallPod stations Model number Occupancy sensors Model number On/Off npodm [color] Small motion 36, ceiling (PIR / dual tech) ncm 9 RJB / ncm PDT 9 RJB On/Off & raise/lower npodm DX [color] Large motion 36, ceiling (PIR / dual tech) ncm1 RJB / ncm PDT 1 RJB Graphic touchscreen npod GFX [color] Wall switch with raise/lower nwsx PDT LV DX [color] Photocell controls Model number Cat- cable (plenum rated) Model number Full range dimming ncm ADCX RJB 1' cable CAT 1FT J1 3' cable CAT 3FT J1 nlight AIR Control Accessories: Order as separate catalog number. Visit Wall switches Model number On/Off single pole rpodb [color] On/Off two pole rpodb 2P [color] On/Off & raise/lower single pole rpodb DX [color] On/Off & raise/lower two pole rpodb 2P DX [color] On/Off & raise/lower single pole rpodbz DX WH 1 Notes 1 Can only be ordered with the RES7Z zone control sensor version. WL4-LED LED: One Lithonia Way Conyers, GA 312 Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 6/29/17

21 WL4 Wall Bracket & Surface Mount LED Sensor Options Basic nlight Zone Option MSD7 Automatic Dimming Photocell Occupancy Sensing PIR PDT X nlight Wired Networking nlight AIR Networking nlight AIR Zone NES7 X X NES7ADCX X X X NESPDT7 X X RES7N X X X RES7Z X X X Integrated Sensor with Individual Control The MSD7 PIR occupancy sensor is ideal for areas without obstructions and where daylight harvesting may be desired. Suggested applications include, but not limited to, hallways, corridors, storage rooms, and breakrooms or other areas where people are typically moving. nlight Wired Networking The nes 7 is ideal for small rooms without obstructions or areas with primarily walking motion. Ideal areas include hallways, corridors, storage rooms, and breakrooms. Additionally, the NES7ADCX includes an integrated photocell, which enables daylight harvesting controls. For areas like restrooms, private offices, open offices, conference rooms or any space with obstructions, the nes PDT 7 dual technology sensor is recommended. The nes PDT 7 utilizes both PIR (passive infrared) and Microphonics technologies to detect occupancy. Sequence of Operation Sequence of Operation MAX MOTION NO MOTION MOTION MAX MOTION NO MOTION MOTION LIGHT LEVEL Occupants Detected In The Space Room Unoccupied Sensor Detects Motion LIGHT LEVEL Occupants Detected In The Space Room Unoccupied Sensor Detects Motion MIN LIGHTS ON 17. MIN TIME DELAY 2. MIN AT A 1% LEVEL LIGHTS OFF LIGHTS ON MIN LIGHTS ON 7. MIN TIME DELAY 2. MIN AT A 1% LEVEL LIGHTS OFF LIGHTS ON *The presetting on the automatic dimming photocell is fc. Sensor Coverage Pattern Mini 36 Lens Recommended for walking motion detection from mounting heights between 8 ft (2.44 m) and 2 ft (6.1 m) Initial detection of walking motion along sensor axes at distances of 2x the mounting height up to 1 ft (4.7 m) and 1.7x up to 2 ft (6.1 m). Provides 12 ft (3.66 m) radial detection of small motion when mounted at 9 ft (2.74 m) Initial detection will occur earlier when walking across sensor s field of view than when walking directly at sensor nlight AIR Wireless nlight AIR is the ideal solution for retrofit or new construction spaces where adding additional wiring can be labor intensive and costly. The integrated res 7 smart sensor is part of each luminaire in the nlight AIR network, which can be grouped to control multiple luminaires. The granularity of control with the digital PIR occupancy detection and daylight sensing makes a great solution for any application. 9 FT Mounting H H H N N N m ft Simple as 1,2,3 1. Install the nlight AIR fixtures with embedded smart sensor 2. Install the wireless battery-powered wall switch 3. With CLAIRITY app, pair the fixtures with the wall switch and if desired, customize the sensor settings for the desired outcome nlight AIR rpodb 2P DX Mobile Device WL4-LED LED: One Lithonia Way Conyers, GA 312 Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 6/29/17

22 WL4 Wall Bracket & Surface Mount LED Performance Data Lumen package Input watts Lumens LPW 2L LP L LP L LP L LP L LP L LP L LP L LP L LP L LP L LP L LP DIMENSIONS All dimensions are inches (centimeters) unless otherwise noted. Specifications Length: with sensor - -1/16 (129.4) without sensor /16 (118.9) Height: with sensor /16 (9.3) without sensor - 3-7/8 (9.7) Width: 4-3/4 (12.1) 4-3/4 (12.) 4-3/4 (12.) 3-11/16 (9.3) Without sensor 3-7/8 (9.7) With sensor PHOTOMETRICS WL4 3L EZ1 LP84,.8 delivered lumens, test no. LTL22P, tested in accordance to IESNA LM CP Summary Coefficients of Utilization pf 2% pc 8% 7% % pw 7%%3% %3%1% %3%1% RCR Zonal Lumen Summary Zone Lumens % Lamp % Fixture MOUNTING DATA For unit installation; surface ceiling or wall mounting. 1-/8 (4.1) 1 (2.) 46 (.8) 3-3/8 (8.1) 1-3/8 (3.) 17-3/4 (4.1) WL4-LED LED: One Lithonia Way Conyers, GA 312 Phone: Fax: Acuity Brands Lighting, Inc. All rights reserved. Rev. 6/29/17

23 TM Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Inspired by classic fluorescent strip channels, this LED fixture offers a traditional appearance that incorporates the latest technology. Available in several color temperatures, lumen packages and lengths. Ideal for use in commercial, retail, office, warehouse and display applications. Certain airborne contaminants can diminish integrity of acrylic and/or polycarbonate. Click here for Acrylic-Polycarbonate Compatibility table for suitable uses. CONSTRUCTION Compact-design channel and cover are formed from code-gauge cold-rolled steel. Easy to install row aligner bracket included for continuous row mounting. Finish: High-gloss, baked white enamel (standard). OPTICS LEDs provide 8+ color rendering index (CRI) at K, 4 K and K. Diffuse polycarbonate lens provides smooth, linear illumination which is designed to resemble the classic look of traditional fluorescent lamps. Lumen output up to 1, lumens per foot for the 4' and 8' models. Lumen output delivers 2,2 per foot for the 2' model. Luminaire should be installed in applications where ambient temperatures do not exceed maximum ambient operating temperature of 9 F ( C). ELECTRICAL This fixture is tested to withstand a maximum line surge of 2.kV/.2kA ring wave for indoor locations. Also tested to withstand a maximum line surge of 2kV/1kA combination wave for indoor locations. For applications requiring higher level of protection additional surge protection must be provided. INSTALLATION Fixture may be surface or suspension mounted with appropriate mounting options (see accessories). Aligner locks in place for easy continuous row mounting. LISTINGS CSA certified to US and Canadian safety standards and listed suitable for damp locations. Minimum starting temperature at -4 F (-4 C). Maximum ambient operating temperature of 9 F ( C). DesignLights Consortium (DLC) qualified product. Not all versions of this product may be DLC qualified. Please check the DLC Qualified Products List at to confirm which versions are qualified. WARRANTY -year limited warranty. Complete warranty terms located at: Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 2 C. Specifications subject to change without notice. Notes Type LED Striplight CDS DIMMABLE ORDERING INFORMATION Lead times will vary depending on options selected. Consult with your sales representative. Example: CDS L MVOLT DM 4K 8CRI WH Series Length Voltage Driver Color temperature Color rendering index Options Finish CDS LED striplight L24 24" MVOLT V DM -1V dimming K K 8CRI 8 CRI (blank) None WH L " 3 3V 4K 4 K 9CRI 9 CRI PLR1LVG Plug-in wiring L96 96" K K low voltage White Accessories: Order as separate catalog number. HC36 ZACVH SQ Chain hanger and jack chain, 36" (pair) Aircraft cable 1' (one pair) Swivel-stem hanger (specify length in 2" increments) INDUSTRIAL CDS Page 1 of 2

24 CDS LED Striplight OPERATIONAL DATA CDS L24 MVOLT (8CRI) Lumens Wattage LPW K 2, 1 4K 2, K 2, CDS L MVOLT (8CRI) Lumens Wattage LPW K 4, K 4, K 4, WEIGHT: (may vary with options or accessories) L24: 2.6 lbs (1.189 kgs) L: lbs (2.267 kgs) L96: 1 lbs (4. kgs) CDS L96 MVOLT (8CRI) Lumens Wattage LPW K 8, K 9, K 9,3 121 DIMENSIONS All dimensions are shown in inches (centimeters) unless otherwise noted. 2FT Assembly 4FT Assembly 4FT Assembly FT Assembly FT Assembly FT Assembly 8FT Assembly PHOTOMETRICS Please see CDS INDUSTRIAL: One Lithonia Way, Conyers, GA 312 Phone: Acuity Brands Lighting, Inc. All rights reserved. Rev. 6/7/17 Page 2 of 2

25 Luminaire Type: Catalog Number (autopopulated): Gotham Architectural Downlighting LED Downlights 6 Evo Non-Conductive Shower Light Solid-State Lighting FEATURES ORDERING INFORMATION OPTICAL SYSTEM Face plate made of impact-modified acrylic for excellent durability and light transmission Dead front shower light for added safety White painted flange MECHANICAL SYSTEM 16-gauge galvanized steel construction; maximum 1-1/2 ceiling thickness Telescopic mounting bars maximum of and minimum of 1, preinstalled, 4 vertical adjustment Toolless adjustments post installation Junction box capacity: 8 (4 in, 4 out ) 12AWG rated for 9 C Light engine and driver accessible through aperture ELECTRICAL SYSTEM Fully serviceable and upgradeable lensed LED light engine 7% lumen maintenance at 6, hours A+ Capable options indicated by this color background. EXAMPLE: EVO /1 6DFR MVOLT EZ1 Tested according LM-79 and LM-8 standards Overload and short circuit protected 2. SDCM; 8 CRI typical, 9+ CRI optional LISTINGS Fixtures are CSA certified to meet US and Canadian standards; wet location, covered ceiling IP6 rated; suitable for steam room applications WARRANTY -year limited warranty. Complete warranty terms located at: Note: Actual performance may differ as a result of end user environment and application. All values are design or typical values, measured under laboratory conditions at 2 C. Series Color temperature Nominal lumen values Aperture Trim style Voltage EVO 27/ 27 K 1 1 lumens lumens 6 DFR Dead (non-conductive) front regressed MVOLT 3/ 3 K 1 1 lumens 4 4 lumens DFD Dead (non-conductive) front drop 12 / K 2 2 lumens 4 4 lumens DFRAMF Dead (non-conductive) front regressed, 277 4/ 4 K 2 2 lumens antimicrobial finish lumens DFDAMF Dead (non-conductive) front drop, antimicrobial finish Driver 1 EZ1 eldoled -1V ECOdrive. Linear dimming to 1% min. EZ1 eldoled -1V ECOdrive. Linear dimming to 1% min. EZB eldoled -1V SOLOdrive. Logarithmic dimming to <1%. EDAB eldoled SOLOdrive DALI. Logarithmic dimming to <1%. EDXB eldoled POWERdrive DMX with RDM (remote device management). Square Law dimming to <1%. Includes termination resistor. Refer to DMXR Manual. EXA1 XPoint Wireless, eldoled -1V ECOdrive. Linear dimming to 1%. Refer to XPoint tech sheet. EXAB XPoint Wireless, eldoled -1V SOLOdrive. Logarithmic dimming to <1%. Refer to XPoint tech sheet. ECOS2 2,3 Lutron Hi-Lume 2-wire forward-phase driver. Minimum dimming level 1%. Minimum lumen 1/Maximum lumen 3. ECOS3 2,3 Lutron Hi-Lume 3-wire or EcoSystem dimming driver. Minimum dimming level 1%. Minimum lumen 1/Maximum lumen 4. Options SF Single fuse. Specify 12V or 277V. ELR 4 Emergency battery pack with remote test switch NPS8EZ 3 nlight dimming pack controls -1V eldoled drivers. NPS8EZER 3, nlight dimming pack controls -1V eldoled drivers. ER controls fixtures on emergency circuit. N8 7 nlight Lumen Compensation BGTD Bodine generator transfer device CRI9 High CRI (9+) CP 6 Chicago plenum RRL RELOC -ready luminaire. Provides compatibility with Lithonia RELOC system. Access above ceiling required. ACCESSORIES order as separate catalog numbers (shipped separately) SCA6 Sloped ceiling adapter. Degree of slope must be specified (D, 1D, 1D, 2D, 2D, 3D). Ex: SCA6 1D. Refer to TECH-19. CTA4-8 YK Ceiling thickness adapter (extends mounting frame to accommodate ceiling thickness up to ). Adds ~4 to fixture height. ISD BC -1V wallbox dimmer. Refer to ISD-BC. EVO-6-Shower PAGE 1 OF 4 GOTHAM ARCHITECTURAL DOWNLIGHTING P gothamlighting.com Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 4/24/17. Specifications subject to change without notice.

26 6 EVO Non-Conductive Shower Light Solid-State Lighting DIMENSIONAL DATA ELECTRICAL NOTES All dimensions are inches (centimeters) unless otherwise noted. ORDERING NOTES [33.] Aperture: 6-1/4 (1.9) Ceiling Opening: 7-1/8 (18.1) Overlap Trim: 7-1/2 (19.1) [.4] EMERGENCY LUMEN OUTPUT LUMENS WATTAGE INITIAL OUTPUT [4.3] DIMENSIONS FOR CHICAGO PLENUM [37.] 1. Refer to TECH-24 for compatible dimmers. 2. Not available with nlight and XPoint options. 3. Specify voltage. ECOS2 not available with 277V. 4. For dimensional changes, refer to TECH-14. Not available with 3V. 7 8 [19.4] [19.2] [1.7] EVO 6DFR EVO 6DFD [24.]. For use with generator supply EM power. Will require an emergency hot feed and normal hot feed. 6. ELR not available. CP and ECOS2-3 lumen max. CP and ECOS3-4 lumen max. CP, ECOS2/ECOS3 and EL - 2 lumen max. 7. Fixture begins at 8% light level. Must be specified with NPS8EZ or NPS8EZER. GOTHAM ARCHITECTURAL DOWNLIGHTING P gothamlighting.com EVO-6-Shower Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 4/24/17. Specifications subject to change without notice. PAGE 2 OF 4

27 6 EVO Non-Conductive Shower Light Solid-State Lighting PHOTOMETRY Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance: Single Luminaire 3 Above Floor EVO /4 6DFR INPUT WATTS: 44, DELIVERED LUMENS: , LM/W=.8, 1. S/MH, TEST NO Ave Lumens Zone Lumens % Lamp *1 *Efficiency pf 2% pc 8% 7% % pw % 3% 1% % 3% 1% % 3% 1% RCR EVO /4 6DFD INPUT WATTS: 4, DELIVERED LUMENS: 276, LM/W=61.3, 1. S/MH, TEST NO Ave Lumens Zone Lumens % Lamp *1 *Efficiency pf 2% pc 8% 7% % pw % 3% 1% % 3% 1% % 3% 1% RCR LUMEN OUTPUT MULTIPLIER - CRI CRI FACTOR 8 CRI 1 9 CRI.79 LUMEN OUTPUT MULTIPLIER - CCT CRI FACTOR 4 K 1. K 1 3 K K.938 FINISH LUMEN OUTPUT MULTIPLIER - TRIM FINISH CLEAR (AR) PEWTER (PR) WHEAT (WTR) GOLD (GR) WHITE (WR/WRAMF) Specular (LS) N/A N/A Semi-specular (LSS) N/A N/A Matte-diffuse (LD) N/A N/A BLACK (BR) Paint N/A N/A N/A N/A PHOTOMETRY NOTES Tested in accordance with IESNA LM Tested to current IES and NEMA standards under stabilized laboratory conditions. CRI: 8 typical. EVO-6-Shower PAGE 3 OF 4 GOTHAM ARCHITECTURAL DOWNLIGHTING P gothamlighting.com Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 4/24/17. Specifications subject to change without notice.

28 6 EVO Non-Conductive Shower Light Solid-State Lighting CONTROLS Choose Wall Controls. nlight o ers multiple styles of wall controls each with varying features and user experience. ncm PDT 9 npodm 2P DX A A B C nps 8 EZ A Push-Button WallPod Traditional tactile buttons and LED user feedback Graphic WallPod Full color touch screen provides a sophisticated look and feel B WIRING KEY A CAT-e Cable B Line Power C Low Voltage Dimming Wires ncm ADCX B C A nps 8 EZ OPTIONAL EXAMPLE Group Fixture Control* *Application diagram applies for fixtures with eldoled drivers only. nps 8 EZ Dimming/Control Pack (qty 2 required) npodm 2P DX Dual On/Off/Dim Push-Button WallPod ncm ADCX Daylight Sensor with Automatic Dimming Control ncm PDT 9 Dual Technology Occupancy Sensor Description: This design provides a dual on/off/dim wall station that enables manual control of the fixtures in Row A and Row B separately. Additionally, a daylight harvesting sensor is provided so the lights in row B can be configured to dim automatically when daylight is available. An occupancy sensor turns off all lights when the space is vacant. nlight Control Accessories: Order as separate catalog number. Visit for complete listing of nlight controls. WallPod stations Model number Occupancy sensors Model number On/Off npodm [color] Small motion 36, ceiling (PIR / dual tech) ncm 9 / ncm PDT 9 On/Off & Raise/Lower npodm DX [color] Large motion 36, ceiling (PIR / dual tech) ncm 1 / ncm PDT 1 Graphic Touchscreen npod GFX [color] Wide view (PIR / dual tech) nwv 16 / nwv PDT 16 Photocell controls Model number Wall Switch w/ Raise/Lower (PIR / dual tech) nwsx LV DX / nwsx PDT LV DX Dimming ncm ADCX Cat- cables (plenum rated) Model number 1', CAT 1FT CAT 1FT J1 1', CAT 1FT CAT 1FT J1 Capable Luminaire This item is an A+ capable luminaire, which has been designed and tested to provide consistent color appearance and out-of-the-box control compatibility with simple commissioning. All configurations of this luminaire meet the Acuity Brands specification for chromatic consistency This luminaire is part of an A+ Certified solution for nlight control networks when ordered with drivers marked by a shaded background* This luminaire is part of an A+ Certified solution for nlight control networks, providing advanced control functionality at the luminaire level, when selection includes driver and control options marked by a shaded background* To learn more about A+, visit *See ordering tree for details GOTHAM ARCHITECTURAL DOWNLIGHTING P gothamlighting.com EVO-6-Shower Acuity Brands Lighting, Inc. All Rights Reserved. Rev. 4/24/17. Specifications subject to change without notice. PAGE 4 OF 4

29 Catalog Number FEATURES & SPECIFICATIONS INTENDED USE Ideal for applications requiring attractive, quick-installation exit signs and low energy consumption. CONSTRUCTION Engineering-grade thermoplastic housing is impact-resistant, scratch-resistant, and corrosion-proof. UL94V- flame rating. UV-stable resin resists discoloration from natural and man-made light sources. Rugged unibody housing snaps together with no additional mechanical fasteners. Faceplate and back cover are interchangeable on housing. Positive snap-fit tabs hold faceplate securely, yet easily removable for lamp compartment access. Universal directional Chevron inserts are easily removed and reinserted. Uniform illumination without shadows or hot spots. Reinforced, impact-resistant color panels. Letters 6 high with 3/4 stroke, with 1 ft. viewing distance rating, based upon UL924 standards. U.S. Patent No.,26,21;,611,163;,7,6;,94,3;,988,82; 6,12,81; D383,1 ; D49,71 and 6,2,44. Other patents pending. OPTICS LEDs mounted on printed circuit boards. Low energy consumption less than one watt. LED lamp operates in normal (AC input) and emergency (DC input) modes. The typical life of the exit LED lamp is 1 years. ELECTRICAL Dual voltage input capability (12/277V). Low-voltage disconnect prevents excessively deep discharge that can permanently damage battery. Conveniently located test switch and LED provide visual and manual means of monitoring system. Constant-current series charger minimizes energy consumption and provides low operating costs. Printed circuit boards are 1% quality tested during manufacturing. Current-limiting charger circuitry protects printed circuit boards from shorts. AC/LV reset (line latch) allows battery connection before AC power is applied and aids in preventing battery damage from deep discharge. Crystal oscillator timing system with watchdog protection for precision accuracy. Brownout protection is automatically switched to emergency mode when supply voltage drops below 8% of nominal. Battery: Sealed, maintenance-free nickel-cadmium battery delivers 9-minutes capacity to emergency lamps. Two-state constant-current charge maximizes battery life and automatically recharges after battery discharge. Diagnostics: Single-point microcomputer control for all electronic features. Single multi-chromatic LED indicator to display two-state charging, test activation and three-state diagnostic status. Test switch provides manual activation of 3-second diagnostic testing for on-demand visual inspection. Self-diagnostic testing for five minutes every 3 days and 3 minutes every six months. Diagnostic evaluation of LED light source, AC to DC transfer, charging and battery condition. Continuously monitors AC functionality. INSTALLATION Universal (top-, end-, or back-) mounting. Easily removed mounting knockouts. J-box pattern on back panel. Housing snaps to canopy with four positive-locking tabs. Cam-locking pin tightly secures housing to canopy. Ships standard with additional face plate. LISTINGS UL damp location listed -14 F (1-4 C) standard. NOM Certified (see options). Meets UL924, NFPA 11 (current Life Safety Code), NEC and OSHA illumination standards. NEMA Premium certified. Meets all applicable FCC requirements. Notes Type Specifications Length: 11-3/4 (29.8) Depth: 2 (.1) Height: 7-/8 (19.3) Weight: 2.6 lbs (1.2 kgs) All dimensions are inches (centimeters) unless otherwise specified. 11-3/4 (29.8) Thermoplastic Exits LQM LED LAMPS 7-/8 (19.3) WARRANTY -year limited warranty. (Battery is prorated.) Complete warranty terms located at: Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 2 C. Specifications subject to change without notice. 2 (.1) ORDERING INFORMATION For shortest lead times, configure product using bolded options. Example: LQM S W 3 R 12/277 EL N LQM Family Face type Housing color Number of faces Letter color Input voltage 2 Operation Options LQM S Stencil (blank) Black P Panel 1 W White 3 Single face with extra faceplate and color panel R G Red Green 12/277 Dual voltage (blank) X2 EL N AC only Primary and secondary AC inputs provided 3 Nickel cadmium battery (blank) None NOM NOM certified for Mexico 4 SD Self-diagnostics SDFIFA Self-diagnostics, fire alarm flashing interface and flashing emergency operation and intermittent audible alarm (one flash/one second) Accessories: Order as separate item. ELA WG1 Back-mount wireguard 6 ELA WGEXE End-mount wireguard 6 ELA WGEXT Top-mount wireguard 6 ELA LQMUS12 12 stem kit 7 Notes 1 Only available in custom signage. See spec sheet, Custom-Signage. 2 Some special voltages available. Consult factory. 3 Must specify input voltage 12 or 277. Not available with other options. 4 Available with stencil or panel faces in white housing. Only available with EL N operation. 6 See spec sheet ELA-WG. 7 See spec sheet ELA-Stemkits. EMERGENCY LQM