Contents MANUAL SPRAY GUNS CUPS. ACCESSORIES Impact Controller SPRAY GUN WASHERS DE-STAT UNIT

Transcription

1 Contents MANUAL SPRAY GUNS W400 -W400 WB HIGH T.E.C W300 -W300 WB HIGH T.E.C W200 HIGH T.E.C W101 HIGH T.E.C NEW 77 - NEW LPH 80 - LPH 50 Low Pressure RG 3L CUPS GRAVITY FEED Cups GRAVITY FEED Mix & Spray Cup GUN CASES SUCTION FEED Cups PRESSURE FEED Cups FILTERS For gravity Cups PRESSURE FEED Pressurized containers PC 18 D - PC 18 DT ACCESSORIES Impact Controller Swivel Quick Coupling Cleaning kit Gun Holder for Gravity Spray Gun AG-6 Air Duster Gun Air hose AIRFED 2100 Full Face Mask EUROMASK Half Mask AQUADRY Paint Dryer Gun PAINT FILTERS HIGH T.E.C INFRARED UNITS HEAT T.E.C QUICK DETACHABLE AIR FITTINGS FILTER REGULATORS AIR & FLUID HOSES SPRAY GUN WASHERS INOX HOT H2H Manual Washing INOX LINE AQUA ILA Manual and Automatic Washing IWK H2O Manual Washing IWK SOL B/C (SLB/C) INOX LINE SOL SLD Manual and Automatic Washing DE-STAT UNIT DE-STAT Anti Static Dust Neutraliser Unit TRADING TERMS LEGEND Use and Technical Specifications STANDARD 200/400 W SERIES SET UPS Air Caps W200 W400 W400G W200S Nozzle Needle < 0-250cc > 250cc LV2 N/A LV2 G2P LV2 N/A LV2 G2P LV2 N/A LV2 G2P LV2 N/A LV2 G2P LV2 N/A LV2 G2P LV2 K2 K2 G2P LV2 K2 K2 G2P LV1 K2 K2 G2P R2 R2 R2 G2P W1 W1 W1 G2P W1 W1 W1 G2P REMARK: This price list is valid from All prices/codes/designs are subject to be changed without previous notice. W200P 1

2 series High T.E.C. W400 & W400 WB Manual Gravity Spray Gun 600 cc CUP Air Nipple: Fluid Nipple: Model G1/4 M16x1.5 mm W G 0.8 LV W G 1.0 LV W G 1.2 LV W G 1.3 LV W G 1.4 LV W G 1.5 LV W G 1.6 LV W G 1.8 LV W G 2.0 R W G 2.5 W W400 WB-101G 1.0 WB W400 WB-121G 1.2 WB W400 WB-131G 1.3 WB W400 WB-141G 1.4 WB W400 WB-132G 1.3 WB W400 WB-162G 1.6 WB W400 WBX-124G 1.2 WBX W400 WBX-134G 1.3 WBX W400 WBX-144G 1.4 WBX Gravity spray gun 600 cc CUP 2 Certifications: CERTIFICATE OF COMPLIANCE We certify that we have tested (Report Number: TE011) the Anest Iwata W 400 WB Gravity Spray Gun manufactured by Anest Iwata Corporation, in accordance with pr EN Method 2 - tests for paint transfer efficiency (by weight) and that the spray gun complies with the requirements of the UK Environmental Protection Act 1990, Part Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: 2K VHS Primer 91,0% Base coat (Waterborne) 68,7% Clear coat 77,7% Signed for MIRRC THATCHAM: Ken Roberts Research & Operations Director Date of Issue March 2002 Colthrop Way, Thatcham, Berkshire, RG19 4NR U.K.

3 series High T.E.C. W400 & W400 WB Manual Gravity Spray Gun Ø mm *PRO KIT Air Cap Nozzle+Needle LV2 W400 ø 0,8 LV P 300, B 67, ,61 ø 1,0 LV P 300, B 67, ,61 ø 1,2 LV P 300, B 67, ,61 ø 1,3 LV P 300, B 67, ,61 ø 1,4 LV P 300, B 67, ,61 ø 1,5 LV P 300, B 67, ,61 ø 1,6 LV P 300, B 67, ,61 ø 1,8 LV P 300, , ,61 ø 2,0 R P 300, B 67, ,61 ø 2,5 W P 300, B 67, ,61 WB1-WB2 W400 WB WBX ø 1,0 WB P 340, , ,38 ø 1,2 WB P 340, , ,38 ø 1,3 WB P 340, , ,38 ø 1,4 WB P 340, , ,38 ø 1,3 WB P 340, , ,38 ø 1,6 WB P 340, , ,38 ø 1,2 WBX P 340, , ,38 ø 1,3 WBX P 340, , ,38 ø 1,4 WBX P 340, , ,38 *Pro Kit Manual spray gun PCG 6PE: 600 cc cup + lid + filter Cleaning brushes - Spanner Ref. Part Interchangeable SPARES Code ref. part 5-1 AIR NIPPLE ,28 ref. part 5-2 FLUID NIPPLE ,39 ref. part 6 PATTERN ADJ. SET ,41 ref. part 7 AIR VALVE SEAT SET ,47 ref. part 7-1 O RING ,23 ref. part 8 AIR VALVE ,85 ref. part 9 AIR VALVE SPRING ,43 ref. part 10 FLUID ADJ. GUIDE SET ,97 ref. part 11 FLUID NEEDLE SPRING ,43 ref. part 12 FLUID ADJ. KNOB ,69 ref. part 13 AIR VALVE SHAFT ,88 ref. part 14 AIR ADJ. SET ,97 ref. part 15 TRIGGER STUD ,14 ref. part 16 TRIGGER W400 WB B 10,62 ref. part 16 TRIGGER W ,62 ref. part 17 E STOPPER (2 pcs./1 pk.) ,11 ref. part 18 PAINT FILTER (RED 60 Mesh) ,11 ref. part 21 NEEDLE PACKING CARTRIDGE ,80 Accessories USE: AIR CAP PACKING (WHITE) 1, AIR CAP L PACKING (BLACK) 2, PCG 6 PE Central gravity cup 600 ml (in resin) 41,00 W IMPACT CONTROLLER 34, BRUSH 1,55 VMESGX42198 UNIVERSAL SPANNER 2,28 UH AIR HOSE inner ø 8 mm - outer ø 12 mm (price per metre) 3,56 W CENTRAL GRAVITY GUN HOLDER (Three places) 42,30 W CENTRAL GRAVITY GUN HOLDER (Wall Mountable) 14,06 For M&S Cup - spares - filters refer to pages

4 series High T.E.C. W300 & W300 WB Manual Gravity Spray Gun 600 cc CUP 200 cc CUP Air Nipple : Fluid Nipple: Model G1/4 G1/4 W G 0.8 E W G 1.0 K W G 1.3 H W300 WB-101G 1.0 WB W300 WB-121G 1.2 WB W300 WB-141G 1.4 WB Spot repair gravity spray gun 4 Certifications: CERTIFICATE OF COMPLIANCE We certify that we have tested (Report Number: TE010) the Anest Iwata W 300 Gravity Spray Gun manufactured by Anest Iwata Corporation, in accordance with pren Method 2 - tests for paint transfer efficiency (by weight) and that the spray gun complies with the requirements of the UK Environmental Protection Act 1990, Part Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: Water Based Base Coat 90,6% 2K HS Lacquer (Clearcoat) 85,4% 2K VHS Primer 98,4% Signed for MIRRC THATCHAM: Ken Roberts Research & Operations Director Date of Issue March 2002 Colthrop Way, Thatcham, Berkshire, RG19 4NR U.K.

5 series High T.E.C. W300 & W 300 WB Manual Gravity Spray Gun W300 with 200 cc cup W300 WB with 600 cc cup W300 WB with 200 cc cup Ø mm *Master Kit *Pro Kit Air Cap Nozzle_Needle ø 0,8 E , P 202, , ,54 ø 1,0 K , P 202, , ,54 ø 1,0 H , P 202, , ,54 ø 1,3 H , P 202, , P 61,06 ø 1,0 WB , , ,50 ø 1,2 WB , , ,50 ø 1,4 WB , , ,50 ø 1,0 WB , P 264, , ,50 ø 1,2 WB , P 264, , ,50 ø 1,4 WB , P 264, , ,50 *Master Kit Manual spray gun 3 M&S 600 cc cup sets / or - PCG 2P 2: 200 cc cup + lid + filter Central gravity gun holder Impact controller Cleaning brushes - Spanner *Pro Kit Manual spray gun PCG 2P 2: 200 cc cup + lid + filter Cleaning brushes - Spanner Ref. Part Interchangeable SPARES Code ref. part 5-1 AIR NIPPLE ,28 ref. part 5-2 FLUID NIPPLE ,22 ref. part 6 PATTERN ADJ. SET ,81 ref. part 7 AIR VALVE SEAT SET ,47 ref. part 7-1 O RING ,23 ref. part 8 AIR VALVE ,85 ref. part 9 AIR VALVE SPRING ,43 ref. part 10 FLUID ADJUST GUIDE SET ,97 ref. part 11 FLUID NEEDLE SPRING ,43 ref. part 12 FLUID ADJ. KNOB ,69 ref. part 13 AIR VALVE SHAFT ,88 ref. part 14 AIR ADJ. SET ,97 ref. part 15 TRIGGER STUD ,14 ref. part 16 TRIGGER ,70 ref. part 17 E STOPPER (2 pcs./1 pk.) ,11 ref. part 20 NEEDLE PACKING CARTRIDGE ,80 USE: Accessories W0CUPAZ40IN PCG-2P-2 Central gravity cup 200 ml (fluid nipple in inox) 22,65 W IMPACT CONTROLLER 34, BRUSH 1,55 VMESGX42198 UNIVERSAL SPANNER 2,28 UH AIR HOSE inner ø 8 mm - outer ø 12 mm (price per metre) 3,56 W CENTRAL GRAVITY GUN HOLDER (Three places) 42,30 W CENTRAL GRAVITY GUN HOLDER (Wall Mountable) 14,06 For M&S Cup - spares - filters refer to pages

6 series High T.E.C. W200 Manual Spray Gun W200WB W200 W200 S18 Circulation system Air Nipple : Fluid Nipple: Fluid Nipple: Model G1/4 G3/8 M16x1 (W2003) Pressure W P 0.8 LV W P 1.0 LV W P 1.2 LV W P 0.8 G2P W P 1.0 G2P W P 1.2 G2P W S 1.5 K W S 1.8 K W S 2.0 R W S 2.5 W W200 WB-081P 0.8 WB W200 WB-101P 1.0 WB W200 WB-121P 1.2 WB W ZP 1.5 R1Z W ZP 2.0 R1Z W ZP 2.5 R1Z W200 S18 / W200 S G2P Suction W200 WB-162 S W200 WB-182 S WB2 WB W R :400 W W :400 Pressure & suction spray gun W200 S25 L Rotating Air Hose Joint 6 Push Pull pattern adjustment set Quick fan pattern Accessories AIR CAP PACKING (WHITE) 1, AIR CAP L PACKING (BLACK) 2, PCL 7 B3 Suction cup 700 ml 44, PCL 10 B3 Suction cup 1 litre 49, PC 19B Pressure cup 1 litre (W2003) 128,03 W IMPACT CONTROLLER 34, BRUSH 1,55 VMESGX42198 UNIVERSAL SPANNER 2,28 UH AIR HOSE inner ø 8 mm - outer ø 12 mm (price per metre) 3, L ROTATING AIR HOSE JOINT 15,76 W-200-X1 QUICK FAN PATTERN CONTROL 114, PUSH-PULL TYPE PATTERN ADJ. SET SPECIAL 103,41 For cup spares - filters refer to pages CERTIFICATE OF COMPLIANCE We certify that we have tested the Anest Iwata High T.E.C. W 200 suction spray gun in accordance with ASTM Designation: D Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: PRIMER 95.2% SOLID COLOUR 78.9% BASECOAT 73.8% CLEAR LACQUER 77.4% Signed for MIRRC THATCHAM: M. Smith Chief Executive CERTIFICATE OF COMPLIANCE We certify that we have tested the Anest Iwata High T.E.C.W200/WA200/WRA200 pressure feed spray guns in accordance with ASTM Designation: D Tests for transfer efficiency and that these spray guns comply with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: PRIMER 93.2% SOLID COLOUR 85.9% BASECOAT 82.3% CLEAR LACQUER 73.5% Colthrop Way, Thatcham, Berkshire, RG19 4NR U.K. Signed for MIRRC THATCHAM: M. Smith Chief Executive Colthrop Way, Thatcham, Berkshire, RG19 4NR U.K.

7 series High T.E.C. W200 Manual Spray Gun USE: ø 0,8 G2P , B 67, ,61 ø 1,0 G2P , B 67, ,61 W200 ø 1,2 G2P , B 67, ,61 ø 0,8 LV , B 67, ,61 ø 1,0 LV , B 67, ,61 ø 1,2 LV , B 67, ,61 ø 1,5 LV , B 67, ,61 W200 WB W200 ZP for abrasive paint W200 S18/S25 SUCTION W200 ø 0,8 WB , , ,04 ø 1,0 WB , , ,04 ø 1,2 WB , , ,04 ø 1,4 WB ,04 ø 1,5 ZP , ,06 W-200-X3 364,39 ø 2,0 ZP , , ,39 ø 2,5 ZP , , ,39 ø 1,0 LV , B 67, ,61 ø 1,0 LV S25 478, B 67, ,61 ø 1,4 LV , B 67, ,61 ø 1,5 K , B 67, ,61 ø 1,8 K , B 67, ,61 ø 2,0 R , B 67, ,61 ø 2,5 W , B 67, ,61 PRESSURE Ø mm Spray Gun Air Cap Nozzle_Needle W200 WB W2003 ø 1,6 WB , , ,38 ø 1,8 WB , , ,38 ø 2, , , ,61 ø 2, , , ,61 W2003 Cup PC 19B W200 Suction Models with Containers W200 WB Ø mm Description Capacity Code ø 1,6 WB2 W200 WB + PCL 10 B3 1 litre ,19 ø 1,8 WB2 W200 WB + PCL 10 B3 1 litre ,19 W200 ø 1,5 K2 W200 + PCL 10 B3 1 litre ,06 ø 1,8 K2 W200 + PCL 10 B3 1 litre ,06 ø 2,0 R2 W200 + PCL 10 B3 1 litre ,06 ø 2,5 W1 W200 + PCL 10 B3 1 litre ,06 with Cup PCL 10B3 W2003 ø 2,0 R1 W PC 19B 1 litre ,36 ø 2,5 R1 W PC 19B 1 litre ,36 Ref. Part Description Code ref. part 2-2 SPECIAL FLUID NEEDLE (In Delrin) ,10 ref. part 4 NEEDLE PACKING CARTRIDGE ,80 ref. part 5-1 AIR NIPPLE ,28 ref. part 5-2 FLUID NIPPLE ,09 ref. part 6 PATTERN ADJ. SET ,59 ref. part 7 AIR VALVE SEAT ,47 ref. part 7-1 O RING ,23 ref. part 8 AIR VALVE ,85 ref. part 9 AIR VALVE SPRING ,43 ref. part 10 FLUID ADJ. GUIDE SET ,97 ref. part 11 FLUID NEEDLE SPRING ,43 ref. part 12 FLUID ADJ. KNOB ,69 ref. part 13 AIR VALVE SHAFT ,88 ref. part 14 AIR ADJ. SET (W200 P) ,97 ref. part 14-1 BLANK SCREW (W200 S) ,24 ref. part 15 TRIGGER STUD ,14 ref. part 16 TRIGGER ,62 ref. part 17 E STOPPER (2 pcs./1 pk.) ,11 7

8 W101 High T.E.C. Manual Spray Gun Pressure Air Nipple: Fluid Nipple: Model W P 0.8 E2P W P 1.0 E2P W P 1.3 E2P W P 1.5 E2P W S 1.3 H W S 1.5 H W S 1.8 N W G 1.0 E W G 1.3 H W G 1.5 H W G 1.8 N Suction G1/4 G1/4 Gravity Gravity, pressure, suction spray gun 8 Certifications: CERTIFICATE OF COMPLIANCE We certify that we have tested the Anest Iwata High T.E.C. W100/WA100 pressure spray guns in accordance with ASTM Designation: D Tests for transfer efficiency and that these spray guns comply with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). CERTIFICATE OF COMPLIANCE We certify that we have tested the Anest Iwata High T.E.C. W 100 spot repair spray Transfer efficiencies achieved with the materials gun in detailed accordance in the with test ASTM report Designation: were: D Tests for transfer efficiency and that this spray gun complies with the requirements of the Environmental Protection Act 1990, Part I Revision as detailed in PG6/34(97), PG6/23(97), PG6/40(94), PG6/41(94). Transfer efficiencies achieved with the materials detailed in the test report were: PRIMER 93.6% SOLID COLOUR 76.3% BASECOAT 79.3% CLEAR LACQUER 74.1% Signed for MIRRC THATCHAM: M. Smith PRIMER Chief Executive 97.4% SOLID COLOUR 79.8% BASECOAT 89.2% CLEAR LACQUER 72.8% Colthrop Way, Thatcham, Berkshire, RG19 4NR U.K. Signed for MIRRC THATCHAM: M. Smith Chief Executive Colthrop Way, Thatcham, Berkshire, RG19 4NR U.K.

9 W101 High T.E.C. Manual Spray Gun Ø mm Spray Gun Air Cap Nozzle_Needle PRESSURE SUCTION GRAVITY ø 0,8 E2P , , P 61,06 ø 1,0 E2P , , P 61,06 ø 1,3 E2P , , P 61,06 ø 1,5 E2P , , P 61,06 ø 1,3 H , , P 61,06 ø 1,5 H , , P 61,06 ø 1,8 N , , ,06 ø 1,0 E , , P 61,06 ø 1,3 H , , P 61,06 ø 1,5 H , , P 61,06 ø 1,8 N , , ,06 USE: W101 Models with Containers SUCTION GRAVITY Ø mm Description Capacity Code ø 1,3 H2 W101+ PCL 7 B2 CUP 700 ml ,89 ø 1,5 H2 W101+ PCL 7 B2 CUP 700 ml ,89 ø 1,8 N1 W101+ PCL 7 B2 CUP 700 ml ,89 ø 1,0 E1 W101+ PC 4S CUP 400 ml ,95 ø 1,3 H2 W101+ PC 4S CUP 400 ml ,95 ø 1,5 H2 W101+ PC 4S CUP 400 ml ,95 ø 1,8 N1 W101+ PC 4S CUP 400 ml ,95 ø 1,0 E1 W101+ PC 52 AG CUP 200 ml ,21 ø 1,3 H2 W101+ PC 52 AG CUP 200 ml ,21 ø 1,5 H2 W101+ PC 52 AG CUP 200 ml ,21 ø 1,8 N1 W101+ PC 52 AG CUP 200 ml ,21 Ref. Part Interchangeable SPARES Code ref. part 2-2 SPECIAL FLUID NEEDLE (In Delrin) ,92 ref. part 2-2 SPECIAL FLUID NEEDLE (In Delrin) ,92 ref. part 4 NEEDLE PACKING CARTRIDGE ,80 ref. part 5-1 AIR NIPPLE ,28 ref. part 5-2 FLUID NIPPLE G 1/4-1/ ,08 ref. part 6 PATTERN ADJUSTMENT SET ,53 ref. part 6-1 STOPPER W ,83 ref. part 6-1 STOPPER W ,03 ref. part 6-2 WASHER W ,43 ref. part 6-2 WASHER W ,55 ref. part 6-3 BACK RING ,74 ref. part 7 AIR VALVE SEAT SET ,47 ref. part 7-1 O RING ,23 ref. part 8 AIR VALVE ,85 ref. part 9 AIR VALVE SPRING ,43 ref. part 10 FLUID ADJUSTMENT GUIDE ,97 ref. part 11 FLUID NEEDLE SPRING ,43 ref. part 12 FLUID ADJUSTMENT KNOB ,69 ref. part 13 AIR VALVE SHAFT ,88 ref. part 14 AIR ADJ. SET ,97 ref. part 15 TRIGGER STUD ,14 ref. part 16 TRIGGER ,70 ref. part 17 E STOPPER (2 pcs./1 pk.) ,11 Accessories PC 4S Side Gravity cup 400 ml 40, PC 2 Suction cup 600 ml 57, PC 3 Suction cup 400 ml 73, PCL 7B 2 Suction cup 700 ml 44, PCL 10 B2 Suction cup 1 litre 49, AIR CAP L PACKING (BLACK) 3,08 W SIDE GRAVITY GUN HOLDER 19,36 W IMPACT CONTROLLER 34, BRUSH 1, SPANNER 11,01 UH AIR HOSE inner ø 8 mm - outer ø 12 mm (price per metre) 3,56 For cup spares - filters refer to pages

10 series NEW 77 - NEW 71 Manual Spray Gun NEW 77 Air Nipple: Fluid Nipple: Model G1/4 G3/8 NEW 71 Air Nipple: Fluid Nipple: G1/4 G1/4 NEW 77 NEW NEW 77 1S NEW 77 2S NEW 77 3S NEW 77 1G NEW 77 2G NEW 77 3G NEW 71 NEW NEW 71 1S 1.0 1S NEW 71 2S 1.3 2S NEW 71 3S 1.5 3S NEW 71 4S 1.8 4S NEW 71 21S S NEW 71 31S S NEW 71 1G 1.0 1G NEW 71 2G 1.3 2G NEW 71 3G 1.5 3G NEW 71 4G 1.8 4G NEW 71 21G G NEW 71 31G G Gravity spray gun NEW 77 Certifications: NEW 71 10

11 series NEW 77 - NEW 71 Manual Spray Gun NEW 77 Ø mm Spray Gun Air Cap Nozzle_Needle PRESSURE ø 1,2 0 SE , , ,17 SUCTION GRAVITY NEW 71 SUCTION ø 1,5 1S , , ,17 ø 2,0 2S , , ,17 ø 2,5 3S , , ,17 ø 1,5 1G , , ,17 ø 2,0 2G , , ,17 ø 2,5 3G , , ,17 ø 0, , , ,21 ø 1,0 1S , , ,21 ø 1,3 2S , , ,21 ø 1,3 21S , , ,21 ø 1,5 3S , , ,21 ø 1,5 31S , , ,21 ø 1,8 4S , , ,21 USE: GRAVITY ø 1,0 1G , , ,21 ø 1,3 2G , , ,21 ø 1,3 21G , , ,21 ø 1,5 3G , , ,21 ø 1,5 31G , , ,21 ø 1,8 4G , , ,21 Ref. Part Interchangeable SPARES NEW77 NEW71 ref. part 4 NEEDLE PACKING CARTRIDGE , ,18 ref. part 5 PATTERN ADJUSTING SET , S 18,39 ref. part 5-1/11 O RING SET (2+2 pcs./1 pk.) , ref. part 5-2 STOPPER , ref. part 6 GASKET SET (2 pcs./1 pk.) , ,77 ref. part 7 FLUID NEEDLE GUIDE , S 5,67 ref. part 8 FLUID ADJ. KNOB , ,87 ref. part 9 FLUID NEEDLE SPRING , ,68 ref. part 11 O RING SET (2+2 pcs./1 pk.) ,94 ref. part 13 AIR NIPPLE , ,57 ref. part 14 AIR ADJ VALVE SET , S 18,39 ref. part 15 STOP RING SET (2 pcs./1 pk.) , ,11 ref. part 16 TRIGGER STUD , ,51 ref. part 17 TRIGGER , ,87 ref. part 18 AIR VALVE SPRING , S 0,60 ref. part 19 AIR VALVE , S 6,58 ref. part 20 AIR VALVE SEAT SET , S 27,53 ref. part 20-1 AIR VALVE PACKING SEAT , ,62 ref. part 20-2 AIR VALVE PACKING SET (2 pcs./1 pk.) , ,86 ref. part 20-3 AIR VALVE SEAT , ,50 ref. part 21 FLUID NIPPLE , ,87 Accessories PC 12 Suction cup 1 litre (NEW 77) 63, PC 1 Suction cup 1 litre (NEW 77) 70, PC 1 S Suction cup 1 litre (NEW 77) 70, PCL 7B 3 Suction cup 700 ml (NEW 77) 44, PCL 10 B3 Suction cup 1 litre (NEW 77) 49, PCL 19R Pressure cup 1 litre (NEW 77) 399, PC 2 Suction cup 600 ml (NEW 71) 57, PC 3 Suction cup 400 ml (NEW 71) 73, PCL 7B 2 Suction cup 700 ml (NEW 71) 44, PCL 10 B2 Suction cup 1 litre (NEW 71) 49, BRUSH 1,55 VMESGX42198 UNIVERSAL SPANNER 2,28 UH AIR HOSE inner ø 8 mm - outer ø 12 mm (price per metre) 3,56 For cup spares - filters refer to pages

12 series LPH 80-LPH 50 Low Pressure Manual Spray Gun 250 cc CUP LPH 50 Air Nipple: G1/4 Fluid Nipple: G1/8 LPH 80 Fluid Nipple: G1/4 LPH 50 Model LPH G 0.4 E LPH G 0.6 E LPH G 0.8 E LPH G 1.0 E LPH G 1.2 E LPH G LPH G LPH G cc CUP LPH cc CUP 200 cc CUP Spot repair gravity spray gun Certifications: 12

13 series LPH 80-LPH 50 Low Pressure Manual Spray Gun LPH cc + 70 cc cups LPH cc cup LPH cc cup LPH 50 without cup LPH cc cup LPH cc cup Ø mm Spray Gun Code Air Cap Fluid Nozzle Fluid Needle ø 0,4 LPH cc CUP + 70cc CUP , , , ,47 ø 0,6 LPH cc CUP + 70cc CUP , , , ,47 ø 0,8 LPH cc CUP + 70cc CUP , , , ,47 ø 1,0 LPH cc CUP + 70cc CUP , , , ,47 ø 1,2 LPH cc CUP + 70cc CUP , , , ,47 ø 0,4 LPH cc CUP P 224, , , ,47 ø 0,6 LPH cc CUP P 224, , , ,47 ø 0,8 LPH cc CUP P 224, , , ,47 ø 1,0 LPH cc CUP P 224, , , ,47 ø 1,2 LPH cc CUP P 224, , , ,47 ø 0,4 LPH cc CUP P 224, , , ,47 ø 0,6 LPH cc CUP P 224, , , ,47 ø 0,8 LPH cc CUP P 224, , , ,47 ø 1,0 LPH cc CUP P 224, , , ,47 ø 1,2 LPH cc CUP P 224, , , ,47 ø 0,4 LPH , , , ,47 ø 0,6 LPH , , , ,47 ø 1,0 LPH , , , ,47 ø 0,4 LPH 50 + PC 61 CUP 130 cc , , , ,47 ø 0,6 LPH 50 + PC 61 CUP 130 cc , , , ,47 ø 1,0 LPH 50 + PC 61 CUP 130 cc , , , ,47 ø 0,4 LPH 50 + PC 52 AG CUP 200 cc , , , ,47 ø 0,6 LPH 50 + PC 52 AG CUP 200 cc , , , ,47 ø 1,0 LPH 50 + PC 52 AG CUP 200 cc , , , ,47 Code Interchangeable SPARES LPH 80 LPH AIR CAP COVER ref. part 3 ref. part 3 9, FLUID NIPPLE ref. part , NEEDLE PACKING CARTRIDGE ref. part 7 ref. part 8 12, FLUID NIPPLE ref. part , PATTERN ADJ. SET ref. part 9 23, PATTERN ADJ. SET ref. part 15 28, TRIGGER ref. part 9 7, AIR VALVE SEAT SET ref. part 10 ref. part 13 21, O RING ref. part 10-1 ref. part , AIR VALVE SEAT SCREW ref. part 11 ref. part 14 2, AIR VALVE ref. part 12 ref. part 17 9, AIR VALVE SPRING ref. part 13 ref. part 16 2, FLUID ADJ. GUIDE SET ref. part 14 ref. part 18 21, NEEDLE SPRING ref. part 15 ref. part 19 4, FLUID ADJ. KNOB ref. part 16 5, FLUID ADJ. KNOB ref. part 20 6, AIR VALVE SHAFT ref. part 17 ref. part 12 8, AIR ADJ. SET ref. part 18 ref. part 21 21, TRIGGER STUD ref. part 19 ref. part 11 3, TRIGGER ref. part 20 7, E STOPPER (2 pcs./1 pk.) ref. part 21 ref. part 10 2,11 Accessories USE: F PC 52 AG Side gravity cup 200ml (in resin) LPH50 26, PC 61 Side gravity cup 130 ml (fluid nipple in inox) LPH50 46,29 VPE250 Central gravity cup 250 ml (fluid nipple in inox) LPH80 8,86 W0CUPAZ5IN Central gravity cup 70 ml (fluid nipple in inox) LPH80 11,82 W CENTRAL GRAVITY GUN HOLDER (Three places) 42,30 W CENTRAL GRAVITY GUN HOLDER (Wall Mountable) 14,06 W SIDE GRAVITY GUN HOLDER 19, AIR CAP PACKING 1, BRUSH 1, SPANNER 11,01 UH AIR HOSE inner ø 8 mm - outer ø 12 mm (price per metre) 3,56 For cup spares - filters refer to pages

14 RG 3L Manual Spray Gun Air Nipple: Fluid Nipple: Model G1/4 G1/4 RG-3L LV RG-3L LV RG-3L LV cc CUP 200 cc CUP Spot repair gravity spray gun Certifications: 14

15 RG 3L Manual Spray Gun RG_3L (Flat) RG_3L 130 cc cup RG_3L 200 cc cup Ø mm Spray Gun Code Air Cap Fluid Nozzle Fluid Needle ø 0,4 RG-3L , , , ,62 ø 0,6 RG-3L , , , ,62 ø 1,0 RG-3L , , , ,62 ø 0,6 RG-3L-S3 (FLAT) , , , ,62 ø 0,4 RG-3L-1 + PC 61 CUP 130 cc , , , ,62 ø 0,6 RG-3L-2 + PC 61 CUP 130 cc , , , ,62 ø 1,0 RG-3L-3 + PC 61 CUP 130 cc , , , ,62 ø 0,4 RG-3L-1 + PC 52 AG CUP 200 cc , , , ,62 ø 0,6 RG-3L-2 + PC 52 AG CUP 200 cc , , , ,62 ø 1,0 RG-3L-3 + PC 52 AG CUP 200 cc , , , ,62 Ref. Interchangeable SPARES Code ref. part 4 JAM NUT ,60 ref. part 6 NEEDLE PACKING CARTRIDGE ,44 ref. part 7-1 FLUID NIPPLE ,09 ref. part 8 TRIGGER ,68 ref. part 9 E STOPPER (2 pcs./1 pk.) ,11 ref. part 10 TRIGGER STUD ,38 ref. part 11 AIR VALVE SHAFT ,19 ref. part 12 AIR VALVE SEAT SET ,40 ref. part 12-1 O RING ,74 ref. part 13 AIR VALVE SEAT SCREW ,51 ref. part 14 PLUG ,98 ref. part 14 AIR ADJ. SET ,10 ref. part 15 AIR VALVE SPRING ,14 ref. part 16 AIR VALVE ,98 ref. part 17 FLUID ADJ. GUIDE SET ,40 ref. part 18 NEEDLE SPRING ,65 ref. part 19 FLUID ADJ. KNOB ,79 USE: Accessories F PC 52 AG Side gravity cup 200ml (in resin) 26, PC 61 Side gravity cup 130 ml (fluid nipple in inox) 46,29 W SIDE GRAVITY GUN HOLDER 19, BRUSH 1, SPANNER 11,01 UH AIR HOSE inner ø 8 mm - outer ø 12 mm (price per metre) 3,56 For cup spares - filters refer to pages

16 CUPS and CONTAINERS Code Models Spray guns Connections Gravity cups F PC 52 AG Side gravity cup RG 3L-LPH50-W101 G 1/4 (G1/4 ) 26, ml (in resin) PCG 52 AG PCG 6 PE PCG 6 PE Central gravity cup W400-W400 WB-LPH400 M 16 x 1.5 F 41, ml (in resin) PC 4 Side gravity cup W200-NEW77 G 3/8 (PF 3/8 ) 40, ml PCG 2 P PC 4S Side gravity cup W101-NEW 71 G 1/4 (PF1/4 ) 40, ml PC 51 Side gravity cup NEW 71 G 1/4 (PF1/4 ) 49, ml (fluid nipple in inox ) PC 4 / PC 4S PC 61 Side gravity cup RG 3L-NEW 71-LPH50 G 1/4 (PF1/4 ) 46, ml (fluid nipple in inox) PC 5 Side gravity cup NEW 71 G 1/4 (PF1/4 ) 42, ml PC 51 / PC 61 W0CUPAZ40IN PCG-2P-2 Central gravity cup W300-W300 WB-LPH 300 G 1/4 (PF1/4 ) 22, ml (fluid nipple in inox) PC 5 VPE250 Central gravity cup LPH 80 G 1/8 (PF1/8 ) 8, ml (fluid nipple in inox) W0CUPAZ5IN Central gravity cup LPH 80 G 1/8 (PF1/8 ) 11,82 70 ml (fluid nipple in inox) Spares for Gravity Cups VPE250 W0CUPAZ5IN LID SET PC 4 - PC 4S 18, LID SET PC 5 20, LID SET PCG 6 PE 6, LID KNOB 0,59 PCG 2P 2 16

17 MIX & SPRAY CUP Code Models Disposable Gravity Cup A Cup+Inner Lid+ Knob+ Filter (250 µ) (100 pcs.) 206, B Cup+Inner Lid+ Knob+ Filter (125 µ) (100 pcs.) 206, C Cup+Inner Lid+ Knob+ Filter (250 µ+125 µ) (50+50 pcs.) 206, KF Disposable Kit 17,49 (3 M&S Cup + 1 Holder Cup F + 2 Filters 250 µ + 1 Filter 125µ) W400/W400WB KM Disposable Kit 17,49 (3 M&S Cup + 1 Holder Cup M + 2 Filters 250 µ + 1 Filter 125µ) W300/W300WB Cup Holder Kit (1 cup holder + 1 ring) M16x1,5 F - For: W400-W400WB 22, Cup Holder Kit (1 cup holder + 1 ring) G 1/4 M - For: W300-W300WB 22, Paint Filter 250 µ (RED 60 Mesh) 0, Paint Filter Set 250 µ (RED 60 Mesh) (50 pcs.) 45, Paint Filter 125 µ (WHITE 120 Mesh) 0, Paint Filter Set 125 µ (WHITE 120 Mesh) (50 pcs.) 45,10 W2KIT21 Plug Set (50 pcs.) 4,52 W2KIT26 Screen Filter Set 125 µ (5 pcs./1 pk.) 7,71 W2KIT29 Screen Filter Set 125 µ (100 pcs.) 154, Cleaning Kit (Wash bottle set) (20 pcs.) 132,67 USE: Gun case for W400 WBX Code Description VPACW400X Single GUN PLASTIC CASE for W400 WBX 30, W4003 Multiple GUN PLASTIC CASE 49,24 Built in Polypropilene / Dimensions 475 mm x 134 mm x 380 mm 17

18 CUPS and CONTAINERS Code Models Spray guns Connections Suction containers PC 12 Suction cup W200-NEW 77 G 3/8 (PF 3/8 ) 63,03 1 litre PC 1 Suction cup W200-NEW 77 G 3/8 (PF 3/8 ) 70,91 1 litre PC 1 - PC 1S PC 1 S Suction cup W200-NEW 77 G 3/8 (PF 3/8 ) 70,91 1 litre PC 2 Suction cup W101-NEW 71 G 1/4 (PF1/4 ) 57, ml PC PC 3 Suction cup W101-NEW 71 G 1/4 (PF1/4 ) 73,86 400ml PC DISPOSABLE CONTAINER 2, ml (For suction cups) PCL 7B 2 NEW71-W101 G 1/4 (PF1/4 ) 44, ml PCL 7B 3 W200-NEW 77 G 3/8 (PF 3/8 ) 44, ml PCL 7B 2 PCL 7B PCL 10B 2 NEW 71-W101 G 1/4 (PF1/4 ) 49,24 1 litre PCL 10B 3 W200-NEW 77 G 3/8 (PF 3/8 ) 49,24 1 litre Spares for suction container LID PC 1 46, LID PC 2 33, NON DRIP PC 1- PC 12- PC 1 S (Stocks Low) 4, PACKING SET (2 pcs.) PC 1 - PC 1 S - PC 2 4, PACKINGS PC 12 3, PACKINGS (2 pcs.) PCL 7B - PCL 10B 5, NON DRIP SET (2 pcs.) PCL 7B - PCL 10B 5,39 PCL 10B 2 PCL 10B3 18

19 CUPS and CONTAINERS Code Models Spray guns Connections Pressure containers PC 19B W2003 G 3/8 (PF 3/8 ) 128,03 1 litre PCL - 19R PCL 19R NEW 77 G 3/8 (PF 3/8 ) 399,85 1 litre PCL 3 P (Stocks Low) LPS 1 G 3/8 (PF 3/8 ) 196,97 1 litre (in stainless steel) Spares for containers PCL - 19B LID PACKING SET (2 pcs.) PC 19 B 15,38 FILTERS Code Description Filters for gravity cups PAINT FILTER 250 µ (60 Mesh Red) Mix & Spray Cup 0, PAINT FILTER 125 µ (120 Mesh White) Mix & Spray Cup 0, PAINT FILTER 250 µ (60 Mesh Red) PCG6 PE 1, PAINT FILTER 125 µ (120 Mesh White) PCG6 PE 1,22 W2KIT06 PAINT FILTER SET (5 pcs./1 pk) PCG-2P-2 13, PAINT FILTER 130 Mesh PCL 7B - PCL 10B - PC 1S 1, PAINT FILTER 130 Mesh PCL 7B - PCL 10B - PC 1S 1,14 19

20 PC 18D - PC 18DT* Pressurized container TECHNICAL CHARACTERISTICS Max. working pressure 3.5 bar Capacity (litres) 2.0 Min. working temp. 5 C Max. working temp. 40 C Fluid nipple G 3/8 (PF3/8) * PC18 DT : Teflon internal coating for water based paint Code Description Model Ref PRESSURIZED CONTAINER PC 18D 402, PRESSURIZED CONTAINER PC 18DT 499, FLUID JOINT PC 18D ref. part 1 23, FLUID JOINT in stainless steel PC 18DT ref. part 1 38, HANDLE PC 18D, PC 18DT ref. part 2 44, HANDLE JOINT PC 18D ref. part 3 17, HANDLE JOINT in stainless steel PC 18DT ref. part 3 29, AIR RELEASE VALVE PC 18D, PC 18DT ref. part 4 5, LID PC 18D, PC 18DT ref. part 5 134, LID PACKING (2 pcs./1 pk.) PC 18D, PC 18DT ref. part 6 3, SUCTION PIPE PC 18D ref. part 7 10, SUCTION PIPE in stainless steel PC 18DT ref. part 7 26, CONTAINER SET PC 18D ref. part 8 177, CONTAINER SET teflon coated inner container PC 18DT ref. part 8 236, SAFETY VALVE PC 18D, PC 18DT ref. part 9 22, PLUG PC 18D, PC 18DT ref. part 9-1 3, NUT PC 18D, PC 18DT ref. part 9-2 5, SAFETY VALVE SPRING PC 18D, PC 18DT ref. part , SAFETY VALVE SPRING SEAT PC 18D, PC 18DT ref. part 9-4 3, SAFETY VALVE BODY PC 18D, PC 18DT ref. part , PRESSURE GAUGE PC 18D, PC 18DT ref. part 10 44, JOINT PC 18D, PC 18DT ref. part 11 8, AIR REGULATOR BODY SET PC 18D ref. part , AIR REGULATOR BODY SET stainless steel made joint PC 18DT ref. part , O RING PC 18D, PC 18DT ref. part 13 0, SPRING PC 18D, PC 18DT ref. part 14 3, REGULATOR SEAT PC 18D, PC 18DT ref. part 15 5, GUIDE PC 18D, PC 18DT ref. part 16 7, DIAPHRAGM SET PC 18D, PC 18DT ref. part 17 12, DIAPHRAGM SET SPRING PC 18D, PC 18DT ref. part 18 2, SPRING HOLDER PC 18D, PC 18DT ref. part 19 2, CAP PC 18D, PC 18DT ref. part 20 17, NUT PC 18D, PC 18DT ref. part 21 3, KNOB PC 18D, PC 18DT ref. part 22 6, NUT PC 18D ref. part 23 4, NUT in stainless steel PC 18DT ref. part 23 7, CHECK VALVE SET in stainless steel PC 18DT ref. part 24 44,82 20

21 ACCESSORIES Code Description Impact Controller W IMPACT CONTROLLER 34,09 Swivel quick coupling VGRSWM SWIVEL QUICK COUPLING 1/4 M Fig. 1 8,46 VGRSWF SWIVEL QUICK COUPLING 1/4 F Fig. 1 8, L ROTATING AIR HOSE JOINT Fig. 2 15, QUICK COUPLING IN STAINLESS STEEL Fig. 3a 27, QUICK COUPLING IN FIBER GLASS Fig. 3b 27,78 Cleaning kit Fig.1 Fig. 3 a Fig.2 b BRUSH 1, BRUSHES Ø 10 (Set of 10 pcs.) 9, BRUSHES Ø 5 (Set of 10 pcs.) 14,38 VMESGX42198 UNIVERSAL SPANNER 2,28 AG_6 air duster gun AG-6 AIR DUSTER GUN 25,46 Air hose UH AIR HOSE inner ø 8 mm - outer ø 12 mm (price per metre) 3,56 Side gravity Central gravity Supports for gravity guns W CENTRAL GRAVITY GUN HOLDER (Three places) 42,30 W CENTRAL GRAVITY GUN HOLDER (Wall Mountable) 14,06 W SIDE GRAVITY GUN HOLDER 19,36 21

22 ACCESSORIES Full face Mask AIRFED 2100 The ANEST IWATA Europe Airfed 2100 is functional and stylish. Suitable for use with previously filtered compressed air. Conforms to the European Standards for light duty compressed air breathing equipment. Easily adjustable headband for maximum comfort Comfort sweatband Wide vision vizor Replaceable vizor cover Low noise air diffuser Air filter regulator mounted on belt that moulds to body Carbon filter Adjustable air control regulator Visual airflow check Y connection and 1.25 m air hose (inner ø 8 mm) for spray gun Code Description VIUAF2100 AIRFED 2100 FULL FACE MASK KIT 280,00 VIUAF2101K5 HYGIENE KIT (FACE SEAL AND SWEATBAND) (5 Pcs./ 1 pk) 58,00 VIUAF2112K10 VIZOR PEEL OFF COVERS (10 pcs./ 1 pk) 19,00 VIUAF2103K5 NAPE COVERS (5 Pcs./ 1 pk) 68,00 VIUAF2104 CHIN GUARD AND FACESCREEN ONLY 24,50 VIUAF2105 HEADPIECE AND HARNESS ONLY 118,00 VIUAF2106 DIFFUSER ASSEMBLY 43,00 VIUAF2107 REGULATOR (NO BRACKET) 114,00 VIUAF2006 ACTIVE CARBON FILTER 27,00 Superseded spares GUN HOSE 23, GUN HOSE FITTINGS 6,50 VIUAF2102K10 VIZOR COVER (10pcs./1pk) 17,00 Half Mask in rubber EUROMASK Half mask in rubber, made in one size, self extinguishing, with two connectors for the particular filter class EUROFILTER. Silicon central discarge valve. Adjustable strap consists of head-piece and buckle, quick to regulate, with two fixing points. Weighs approx. 120 grams. Code Description EUROMASK Prefilter Kit VMIKIT HALF-FACE MASK COMPLETE KIT 44,32 VMI7400 HALF-FACE MASK IN RUBBER WITH 2 JOINTS 19,70 HALF FACE MASK Filters Eurofilter A1 P2 VMI7591 COMBINED FILTERS (2 Pcs./1 Pk) EURFILTER A1- P2 20,68 VMI7592 COMBINED CARBON FILTERS (2 Pcs./1 Pk) EURFILTER A1- B1-E1-K1 20,68 VMI7599 PAINTING PRE-FILTERS KIT (10 filters+2 holders) 9,85 22

23 ACCESSORIES AQUADRY Paint Dryer Gun Stand (height) 180 cm Arm (width - that supports 2 Aquadry guns) 80 cm Max. pressure 7 bar Max. air consumption 2 x 600 l/min Venturi air entrainment increases air flow by 6:1 Each gun can be used independently Variable airflow Stand has slide and lock height adjustment Code Description UIKIT60100 COMPLETE AQUADRY SET (STAND, HOSES + 2 DRYER GUNS) 352, K AQUADRY PAINT DRYER GUN ref. part 1 90,28 W QUICK JOINT MALE BRASS G-1/4 F ref. part 2 10,37 W QUICK JOINT FEMALE BRASS G-1/4 F ref. part 3 20,73 UL QUICK JOINT 1/4 M - ø10 ref. part 4 4,37 UL T JOINT 1/4 FFF ref. part 5 4,88 UL L QUICK COUPLING 1/4 M - ø10 ref. part 6 4, AIR HOSE 10X8 ref. part 7 2,33 UL SPECIAL NIPPLE R.1/4 -G.1/4 ref. part 8 2,30 VIEAQ002 STAND ONLY ref. part 9 150, NOZZLE ref. part 10 59, NUT ref. part 11 15,82 UI SCREEN FILTER ref. part 12 7, COVER ref. part 13 15,82 HIGH T.E.C. Paint Filters The HIGH T.E.C. filter consists of a filter housing, in order to couple the filter between the gun and the fluid hose. It is available in 3 filtrations. It has a large filtration surface and can be used with hydrosoluble products. Code Description VLA HIGH T.E.C. FILTER HOUSING F 3/8 -M 3/8 31,52 VLA HIGH T.E.C. FILTER HOUSING F 1/4 -M 1/4 22,65 VLA HIGH T.E.C. FILTER HOUSING F 3/8 -M 1/4 22,65 FILTER HOUSING: in Derlin material for solvent and water based paint Filtration Mesh Thread Open area Colour opening µ µm VLA UNDERGUN FILTER 54 Mesh % White 1,94 VLA UNDERGUN FILTER 140 Mesh % Blue 1,94 VLA UNDERGUN FILTER 280 Mesh % Green 1,94 FILTER: in Polyamide (PA) plain weave - PLASTIC BODY: in Polypropylene (PP) 23

24 ACCESSORIES INFRARED units Code Model HEAT T.E.C (1 Kw Series) VIU Hand Held Model 210,00 VIU Hand Held Model with separate Stand 260,00 VIU100010T - Hand Held Model with separate Stand + Timer 350,00 VIU Hand Held Models with one Stand 470,00 VIU100020T - 2 Hand Held Models with separate Stand +Timer 560,00 HEAT T.E.C (3 Kw Series) VIU Mobile Infrared Unit 1.360,00 HEAT T.E.C (4 Kw Series) VIU Mobile Infrared Unit 1.565,00 HEAT T.E.C (4.5 Kw Series) VIU Mobile Infrared Unit 1.573,00 VIU Mobile Infrared Unit (Three Phase) 1.597,00 HEAT T.E.C (6 Kw Series) VIU Mobile Infrared Unit 2.330,00 VIU Mobile Infrared Unit (Three Phase) 2.380,00 Kw 4-4,5 series 6 3 Kw series 1 Kw Kw series series 24

25 ACCESSORIES Code Description 220/240 V 380/415 V 3 KW 4 KW 4.5 KW 6 KW 4.5 KW 6 KW VIU CASTOR WITH BRAKE ref. part ,00 VIU CASTOR WITHOUT BRAKE ref. part ,00 VIU410010B U BASE (NO CASTORS) ref. part ,00 VIU40001L MAIN CABLE WITHOUT PLUG (240V 3KW/4KW/4.5KW) ref. part ,00 VIU60001L MAIN CABLE WITHOUT PLUG (240V 6KW) ref. part ,00 VIU630001L MAIN CABLE WITHOUT PLUG 3 PHASE ref. part ,00 VIU TRIAC POWER CONTROL ref. part ,00 VIU FRONT PANEL METAL COVER ONLY ref. part ,00 VIU410100B MAIN UPRIGHT (METAL PART ONLY) ref. part ,00 VIUGSL GAS STRUT LEVER ref. part ,00 VIU41059EUR MAIN SWITCH 3/4/4.5 KW SINGLE PHASE ref. part ,00 VIU MAIN SWITCH 6 KW SINGLE PHASE WITHOUT KNOB ref. part ,00 VIU KNOB FOR 6KW SWITCH ref. part ,00 VIU MAIN SWITCH 6KW 3 PHASE ref. part ,00 VIUHLPPCB CIRCUIT BOARD SINGLE PHASE ref. part ,00 VIUHLPPCB-3 CIRCUIT BOARD THREE PHASE ref. part ,00 VIU BLACK KNOB FOR CONTROL CIRCUIT BOARD ref. part ,00 VIUGS GAS STRUT ONLY 3/4/4.5 KW (WITHOUT LEVER) ref. part ,00 VIUGSA GAS STRUT ONLY 6 KW (WITHOUT LEVER) ref. part ,00 VIU410051B CONTROL PANEL LABEL AI ref. part ,00 VIU009NC NUT CAP M12 ref. part ,30 VIU410099B TOP SUPPORT ARM ref. part ,00 VIU TOP TIE BAR (ALL MODELS) ref. part ,00 VIU RATCHET HANDLE ref. part ,00 VIUM12WSET WASHERS FOR CASSETTE SUPPORT LOCKING HANDLE ref. part ,10 VIU SWIVEL BLOCK ref. part ,00 VIU HEAD ref. part ,00 VIU QUAD BLOCK SOCKET SINGLE PHASE MODELS ref. part ,00 VIU QUAD BLOCK SOCKET 3 PHASE MODELS ref. part ,00 VIU KETTLE PLUG ref. part ,00 VIU10005 CASSETTE CABLE ASSEMBLY C/W PLUG ref. part ,00 VIU UNIVERSAL OUTER STRAP ref. part ,00 VIU TRI KNOB ref. part ,00 VIU T KNOB ref. part ,12 VIU OVERHEAD CASSETTE SUPPORT ARM 3KW/4KW ref. part ,23 VIU OVERHEAD CASSETTE SUPPORT ARM 4.5KW ref. part ,00 VIU OVERHEAD CASSETTE SUPPORT ARM 6KW ref. part ,09 VIU CENTRE STRAP 3 HEAD ref. part ,13 VIU CENTRE STRAP 4 HEAD ref. part ,23 VIU410074B BLUE CASSETTE BOX ONLY 3/4/6KW (EMPTY) ref. part ,54 VIU450011B BLUE CASSETTE BOX ONLY 4.5 KW (EMPTY) ref. part ,21 VIU BACK REFLECTOR 3/4/6 KW ref. part ,56 VIU BACK REFLECTOR 4.5 KW ref. part ,34 VIUHLP34CSAA CASSETTE ASSEMBLY COMPLETE (NO LAMP) 3/4 KWref. part ,38 VIUHLP4500CAA CASSETTE ASSEMBLY COMPLETE (NO LAMP) 4.5 KWref. part ,97 VIU CASSETTE ON/OFF SWITCH ref. part ,42 VIU END REFLECTOR ref. part ,00 VIU CASSETTE GUARD 3/4/6 KW ref. part ,56 VIU CASSETTE GUARD 4.5 KW ref. part ,32 VIU KW TUBE 300 MM 220/240 VOLT 73,62 VIU KW TUBE 500 MM 220/240 VOLT ref. part ,17 VIU KW TUBE 750 MM 220/240 VOLT ref. part ,36 VIU101 HAND HELD STAND WITH SLIDER BRACKET 93,00 VIU103 TIMER ONLY FOR STAND MOUNTED 91,56 VIU104 PLUG FOR STAND MOUNTED TIMER (EACH) 10,00 VIU404 CONTROL BOARD FOR DISTANCE SENSOR MODELS 405,00 VIU406 DIGITAL READ OUT PANEL FOR DISTANCE SENSOR 217,00 VIU408 DIGITAL SENSOR UNIT 257,00 VIU BOLT FOR CASTOR M10 0,42 VIU NUT FOR CASTOR M10 0,34 VIU LOCKING WASHER FOR CASTOR M10 0,33 VIUFS500M FUSE 500 MA 1,50 VIU102 SLIDER BRACKET FOR HAND HELD 22,00 VIUHAN1 HANDLE FOR HAND HELD 18,89 VIUGRP1 GRIP FOR HAND HELD MODEL 7,00 VIU10001 HAND HELD CABLE WITHOUT PLUG 35,00 25

26 Quick detachable air fittings Code I-UK-QD001 3,24 I-UK-QD002 3,24 I-UK-QD003 2,15 I-UK-QD004 9,70 I-UK-QD005 8,70 I-UK-QD006 9,70 Filter regulators Code Model FILTER REGULATOR I-UK-FR001 1/4 FILTER REGULATOR SINGLE OUTLET 21 CFM AIR 77,41 I-UK-FR003 3/8 FILTER REGULATOR TWIN OUTLET 55 CFM AIR 81,85 FILTER REGULATOR COALESCER I-UK-FR015 2 STAGE 3/8 FILTER REGULATOR COALESCER TWIN OUTLET 55 CFM AIR 150,50 I-UK-FR008 3 STAGE 3/8 FILTER REGULATOR COALESCER TWIN OUTLET 55 CFM AIR 321,00 SPARES FOR FILTER REGULATORS I-UK-G103 REPLACEMENT GAUGE 16,05 FOR FR001 I-UK-FR MICRON FILTER 11,00 I-UK-FR113 DIAPHRAGM WITH VALVE 10,00 I-UK-FR521 BOWL 19,00 I-UK-FR501 REGULATION GROUP (includes adj. Knob and internal adj. section) 16,50 FOR FR003/FR008/FR015 I-UK-FR MICRON FILTER 16,25 I-UK-FR211 5 MICRON FILTER 16,50 I-UK-FR212 0,1 MICRON FILTER 92,02 I-UK-FR502 REGULATION GROUP (includes adj. Knob and internal adj. section) 16,50 I-UK-FR500 BOWL 16,50 26

27 Air and fluid hoses Code Model AIR HOSE LOW PRESSURE FITTINGS I-UK-AH001 5m AIR HOSE 8m BORE MWP (20 BAR) 29,16 I-UK-AH002 10m AIR HOSE 8m BORE MWP (20 BAR) 43,00 I-UK-AH003 15m AIR HOSE 8m BORE MWP (20 BAR) 64,80 I-UK-AH004 20m AIR HOSE 8m BORE MWP (20 BAR) 85,57 I-UK-AH m AIR HOSE 8m BORE MWP (20 BAR) 24,21 FLUID HOSE LOW PRESSURE I-UK-FH501 5m FLUID HOSE WITH 3/8 BSP FITTINGS MWP (17 BAR) 60,00 I-UK-FH502 10m FLUID HOSE WITH 3/8 BSP FITTINGS MWP (17 BAR) 117,72 I-UK-FH503 15m FLUID HOSE WITH 3/8 BSP FITTINGS MWP (17 BAR) 166,32 I-UK-FH504 20m FLUID HOSE WITH 3/8 BSP FITTINGS MWP (17 BAR) 197,64 I-UK-FH m FLUID HOSE WITH 3/8 BSP FITTINGS MWP (17 BAR) 32,00 PVC AIR BREATHING HOSE I-UK-AB101 5m AIR HOSE 1/4 BSP BREATHING AIR STANDARD 32,00 I-UK-AB102 10m AIR HOSE 1/4 BSP BREATHING AIR STANDARD 42,12 I-UK-AB103 15m AIR HOSE 1/4 BSP BREATHING AIR STANDARD 60,50 I-UK-AB104 20m AIR HOSE 1/4 BSP BREATHING AIR STANDARD 75,00 AIR ASSISTED AIRLESS FLUID HOSE WITH 1/4 BSP FITTINGS MWP (270 BAR) HIGH PRESSURE I-UK-AAAFFH501 5m FLUID HOSE 34,56 I-UK-AAAFFH502 10m FLUID HOSE 81,00 I-UK-AAAFFH503 15m FLUID HOSE 118,80 I-UK-AAAFFH504 20m FLUID HOSE 118,80 AIR ASSISTED AIRLESS COMBINATION HOSE WELDED TWIN HOSE MWP (200 BAR) HIGH PRESSURE I-UK-AAACH001 5m COMBINATION HOSE 91,00 I-UK-AAACH002 10m COMBINATION HOSE 114,48 I-UK-AAACH003 15m COMBINATION HOSE 139,20 I-UK-AAACH004 20m COMBINATION HOSE 178,20 AIRLESS FLUID HOSE WITH 1/4 BSP FITTINGS MWP (325 BAR) I-UK-AFH800 5m AIRLESS FLUID HOSE 41,04 I-UK-AFH m AIRLESS FLUID HOSE 49,68 I-UK-AFH802 10m AIRLESS FLUID HOSE 73,44 I-UK-AFH803 15m AIRLESS FLUID HOSE 73,44 I-UK-AFH804 20m AIRLESS FLUID HOSE 97,00 27

28 INOX HOT H2H Spray Gun Washer for water based paint - manual washing Hot water spray gun washer for water-based paint- manual washing Entirely built in stainless steel, INOX HOT H2H is a pneumatic-electrical operated machine for washing sprayguns and parts, stained with water-based paint, with hot water. An electric heater is fitted under the sink and is controlled by 3 sensors with thermostats to guarantee top safety conditions. The machine is controlled by (electronic) digital panel provided with a timer to turn off the machine automatically. Adding the Aquarevive detergent to the water, you can thoroughly clean spray-guns also when they are stained with dry paint. TECHNICAL CHARACTERISTICS Mass 36 kg Dimensions 450 x 660 x 1410 mm Air pressure 6 10 bar Operation pneumatic / electric 230V 50 Hz Capacity of stainless steel tank 50 lt. Protection level IP 65 Spray Gun Washer for water based paint 28

29 INOX HOT H2H Spray Gun Washer for water based paint - manual washing Code Model 10200H2H HOT WATER MANUAL SPRAY GUN WASHER P.O.A 1020IWKH21 FLOW REGULATOR ref. part 1 29, IWKH23 DOOR MAGNET ref. part3 8, IWKH24 AIR GUN SUPPLY HOSE ref. part 4 13, IWKH24A AIR GUN ref. part 4A 51, IWKH26G GRILLE ref. part 6C 111, IWKH224 PUMP SUPPLY HOSE ref. part 7 21, IWKH2H7F PUMP SUPPLY FILTER ref. part 7F 51, IWKH211A LOWER DOOR ref. part 11A 92, IWKH212 AIR INLET CONNECTION WITH FILTER ref. part 12 32, IWKH2H15 VAPOUR SUCTION NOZZLE ref. part 15 25, IWKH2H16 VAPOURS EXHAUST STACK ref. part 16 33, IWKH218K CONTROL PANEL KIT WITH LEVER ref. part , IWKH218L ONLY CONTROL LEVER ref. part 18C 3, IWKH221 HOT WATER PUMP ref. part , IWKH222 NEBULISER ref. part 22 63, IWKH222C CLEAN WATER SPRAY NOZZLE ref. part 22C 13, IWKH223 NEBULISER SUPPLY HOSE ref. part 23 21, S3723R WATER FLOW CONTROL VALVE ref. part 23R 23, IWKH230 DRAIN VALVE ref. part 30 31, IWKH235 AIR DISTRIBUTOR ref. part 35 61, IWKH36 WASHING BRUSH WITH HOSE ref. part 36 19, IWKH2H41 AIR SUCTION CHECK VALVE ref. part 41 43, S3274 EARTH WIRE ref. part 74 19, IWKH2H80 ELECTRONIC PANEL ref. part , IWKH2H82 SCREW ref. part 82 10, IWKH2H83 PROTECTION DEEP TANK SURFACE ref. part , IWKH2H85 ELECTRICAL RESISTANCE + ELECTRICAL CABLE ref. part , IWKH2H88 HEAT INSULATION ref. part 88 29, IWKH2H89 PROTECTION RESISTANCE ref. part , IWKH2H90 PROTECTION REINFORCE ref. part 90 14, IWKH2H92 MAX TEMPERATURE THERMOSTAT ref. part 92 33, IWKH2H95 LID ref. part 95 29, IWKH2H98 PROBE STAY ref. part 98 21, IWKH2W50B KIT OF 5 BAG PRE-FILTERS ref. part W50 40, IWKH2W51B BAG FILTER ref. part W51 30, IWKW52 CONTAINER FOR FILTERING AND DECANTATION ref. part W52 79, IWKW53 CONTAINER TO COLLECT THE REGENERATED WATER ref. part W53 92, H2HRE4 AQUAREVIVE CONCENTRATED DETERGENT 4 lt. 103,67 29

30 INOX LINE AQUA mod. ILA Spray Gun Washer for water based paint - manual & automatic washing The INOX LINE ACQUA/ILA stainless steel (Electroclean) Spray Gun Washer is designed for the manual and automatic water washing of spray guns and small objects. The unit is equipped with a pneumatic pump in stainless steel for automatic water washing and a venturi pump for manual water washing with atomizer and a brush connected to water supply. All the instruments are located in front of the panel for full visibility and easy operation. The vapours generated are extracted by the venturi system. Certifications TECHNICAL CHARACTERISTICS Mass 53 kg Dimensions 600 x 700 x 1490 mm Feeding air operating pressure 6 10 bar Recommended operating pressure 8 bar Air consumption (8 bar) 9 Nm 3/h Number of pump strokes n./min Capacity of the stainless steel water tank 50 lt. Lower container capacity 70 lt. Spray Gun Washer for water based paint 30

31 INOX LINE AQUA mod. ILA Spray Gun Washer for water based paint - manual & automatic washing Code Model PA PUMP 10200S37 MANUAL AND AUTO. SPRAY GUN WASHER INOX LINE AQUA (ILA) P.O.A 1020S371 FLOW REGULATOR ref. part 1 35, S373 MAGNETIC LOWER DOOR ref. part 3 8, S374 BLOWING GUN FEEDING HOSE ref. part 4 13, A BLOWING GUN ref. part 4A 49, S375C AIR AND VAPOUR CONVEYOR ref. part 5 89, S376C GRID SHAPED SURFACE ref. part 6C 122, S3711A LOWER DOOR ref. part 11A 126, S3712 AIR INLET PIPE FITTING WITH FILTER ref. part 12 33, S3714 TIMER ref. part , S3715 VAPOUR SUCTION NOZZLE ref. part 15 25, S3716 VAPOUR EXHAUST PIPE ref. part 16 33, S3717 AIR SUCTION CHECK VALVE ref. part 17 59, S3718 ATOMIZER CONTROL VALVE ref. part 18 43, S3718C WATER CHECK VALVE ref. part 18C 51, S3719 PUMP CONTROL VALVE ref. part 19 43, S3721 PUMP ref. part , S3722 ATOMIZER ref. part 22 78, S3723 ATOMIZER SUPPLY HOSE ref. part 23 21, S3723R WATER FLOW CONTROL VALVE ref. part 23R 23, S3724 PUMP SUPPLY HOSE ref. part 24 21, S3729F PUMP SUPPLY FILTER (ONLY FILTER) ref. part 29F 49, S3729S PUMP SUPPLY HOSE (WITH FILTER) ref. part 29S 65, S3730 WASHING TANK DISCHARGE VALVE ref. part 30 33, S3732 PNEUMATIC DIAPHRAGM PUMP PA ref. part , S3735 AIR DIFFUSER ref. part 35 65, IWKH36 WASHING BRUSH ref. part 36 19, S3746 COVER OF INSPECTION HOLE ref. part 46 25, S3772 CONTROL PANEL ADHESIVE ref. part 72 25, S3774 EARTH WIRE ref. part 74 19, IWKH2W50B KIT OF 5 BAG PRE-FILTERS ref. part W50 40, IWKH2W51B FILTERING BAG ref. part W51 30, S37W52 CONTAINER FOR FILTERING AND DECANTATION ref. part W52 78, S37W53 CONTAINER TO COLLECT REGENERATED WATER ref. part W53 92, PA46 STAINLESS STEEL SPRING ref. part PA46 39, PA57 DISCHARGE SILENCER ref. part PA57 9, PA58 AIR INLET FITTING ref. part PA58 7, PA38K COMPLETE INLET VALVE KIT ref. part 38-38A , PA44K COMPLETE OUTLET VALVE KIT ref. part , PA48K COMPLETE DIAPHRAGM KIT ref. part , S37PA54K PNEUMATIC VALVE COMPLETE ref. part ,97 31

32 IWK H2O Spray Gun Washer for water based paint - manual washing The ANEST IWATA IWK H2O is a totally pneumatic washing machine for manually washing water based paint from spray guns and small objects.the instruments, located on front section, make it easy to use. The spray gun-washer is fitted with a small pump and sprayer that draws the clean water from a container located at the bottom of the machine and a second sprayer for final washing that is connected to the company s water supply. A blowing gun that dries the guns and washed pieces. TECHNICAL CHARACTERISTICS Mass 44 kg Dimensions 450 x 660 x 1335 mm Feeding air operating pressure 6 10 bar Air Consumption (8 bar) 16 Nm3/h Capacity of stainless steel water tank 50 lt. Lower container capacity 70 lt. Code Model MANUAL SPRAY GUN WASHER IWK H2O P.O.A 1020IWKH21 FLOW REGULATOR ref. part 1 29, IWKH23 DOOR MAGNET ref. part 3 8, IWKH24 AIR GUN SUPPLY HOSE ref. part 4 13, IWKH24A AIR GUN ref. part 4A 51, IWKH26G GRILLE ref. part 6G 111, IWKH211A LOWER DOOR ref. part 11A 92, IWKH212 AIR INLET FITTING WITH FILTER ref. part 12 32, IWKH218K CONTROL PANEL KIT WITH LEVER ref. part , IWKH218L ONLY CONTROL LEVER ref. part 18 3, IWKH218C CONTROL VALVE KIT WITH LEVER ref. part 18C 30, IWKH218CL ONLY CONTROL LEVER ref. part 18C 3, IWKH221 PUMP ref. part , IWKH222 NEBULISER ref. part 22 63, IWKH222C SPRAY NOZZLE ref. part 22C 13, IWKH223 NEBULISER SUPPLY HOSE ref. part 23 21, S3723R WATER FLOW CONTROL VALVE ref. part 23R 23, IWKH224 PUMP SUPPLY HOSE ref. part 24 21, IWKH230 WASH TANK DRAIN VALVE ref. part 30 31, IWKH235 AIR DISTRIBUTOR ref. part 35 61, IWKH36 WASHING BRUSH ref. part 36 19, IWKH237 CONNECTION HOSE FOR WASHING BRUSH ref. part 37 11, IWKH2W50B KIT OF 5 BAG PRE-FILTERS ref. part W50 40, IWKH2W51B BAG FILTER ref. part W51 30, IWKW52 CONTAINER x FILTERING AND DECANTATION ref. part W52 79, IWKW53 CONTAINER for REGENERATED WATER ref. part W53 92,56 Gun Washer for water based paint 32

33 IWK SOL B/SOL C mod. SLB/SLC Spray Gun Washer The ANEST IWATA IWK SLB/SLC This is a small washing machine but with a great capacity of washing spray guns inside and outside. A diaphragm pump sucks the washing solvent from the bins located at the base of the machine. There is a choice of two models: IWK SLB: This machine is provided with exhauster, outer supporting bench for guns and lower manhole. It has also a timer-controlled diaphragm pump for automatic washing, a nozzle and a compressed-air-hose for final manual washing and small spraying works. IWK SLC: This machine is equipped as IWK SOL B machine, with an additional diaphragm pump for final automatic rinsing. TECHNICAL CHARACTERISTICS Mass 42 kg Dimensions 660 x 450 x 1100 mm Dim. of washing tank 500 x 400 x 270 Exhaust duct diameter 120 mm Feeding air operating pressure 6 10 bar. Capacity of each single container 25 lt. Code Model SPRAY GUN WASHER IWK SLB P.O.A SPRAY GUN WASHER IWK SLC P.O.A 1020SOL0 LOWER DOOR ref. part 0 95, SOL3 DOOR CLOSING MAGNET ref. part 3 10, SOL4 AIR FEED HOSE ref. part 4 14, SOL12 AIR INLET JOINT ref. part 12 34, PUSH-BUTTON ref. part 13 53, SOL14 TIMER ref. part , SOL15 VAPOUR SUCTION NOZZLES ref. part 15 7, SOL16 VAPOUR EXHAUST STACK ref. part 16 34, SOL18BK ATOMIZER CONTROL WITH LEVER KIT ref. part 18 52, SOL18L LEVER (1 PC.) ref. part 18 3, S3722 CLEAN SOLVENT ATOMIZER ref. part 22 78, SOL23 HOSE ref. part 23 22, SOL25 WORK SURFACE ref. part 25 59, SOL29 HOSE FOR CLEAN SOLVENT ref. part 29 59, SOL29F1 FILTER ref. part 29 51, SOL29S HOSE ref. part 29S 67, SOL29F2 ONLY FILTER ref. part 29S 18, SOL29G1 JOINT FOR FEEDING HOSES ref. part ( S) 7, SOL31 CLEAN SOLVENT PUMP ref. part 31 73, SOL32 AUTOMATIC WASHER PUMP ref. part , SOL39 SAFETY VALVE FOR WASHER PUMP ref. part , SOL44 USED SOLVENT DRAIN HOSE ref. part 44 12, SOL47 COLLECTING TANK ref. part , SOLD DRILLED SCREW ref. part D 22, SOLF GUN CUP SUPPORT ref. part F 54, SOLH SPRAY GUNS COVER SUPPORT ref. part H 50, SOLL1 INTERNAL SPRAYER ref. part L/L1 35, SOLM KIT OF BRASS TUBES WITH NOZZLES ref. part M 333, SOLN PROTECTION PLUG x DISCHARGE TANK ref. part N 3, SOLPQ SPECIAL CLAMP ref. part PQ 17, SOLT MALE NOZZLE ref. part T 9, SOLZ JET FOR SUCTION GUNS 21, PA46 STAINLESS STEEL SPRING ref. part PA46 39, PA57 DISCHARGE SILENCER ref. part PA57 9, PA58 AIR INLET FITTING ref. part PA58 7, PA38K COMPLETE INLET VALVE KIT ref. part , PA44K COMPLETE OUTLET VALVE KIT ref. part , PA48K COMPLETE DIAPHRAGM KIT ref. part , PA54K PNEUMATIC VALVE COMPLETE ref. part ,97 33

34 INOX LINE SOL mod. SLD Spray Gun Washer - manual & automatic washing The INOX LINE SOL/SLD/ILD stainless steel and zincate steel (Electroclean) Spray Gun Washer is designed for the manual and automatic washing of spray guns and small objects. The unit is equipped with two pneumatic pumps for washing and rinsing, one atomizer, one venturi pump and a blowing gun. The vapours generated are extracted automatically when upper door is opened by the venturi system. This unit has the possibility of being combined with a distiller for sequential washing and distilling and incorporates a colour spray test facility. Can be fitted with active carbon filters. Code Model S32 MANUAL AND AUTO SPRAY GUN WASHER INOX LINE SLD P.O.A 1020S322 SPRAY GUN WASHER INOX LINE WITH DISTILLER ILD P.O.A 1020S32189 FILTER CARTRIDGE ACTIVE CARBON P.O.A 1020S324 SPRAY GUN AIR SUPPLY HOSE ref. part 4 13, S325 VAPOUR AND AIR CONVEYOR ref. part 5 73, S3211A LOWER DOOR ref. part 11A 132, S3212 AIR INLET FITTING WITH FILTER ref. part 12 33, S3213 PUSH BUTTON CONTROL. FINAL WASHING ref. part 13 53, S3214 TIMER ref. part , S3215 VAPOUR SUCTION NOZZLE ref. part 15 25, S3216 VAPOUR EXHAUST DUCT ref. part 16 45, S3218 VALVE CONTROLLING THE ATOMIZER ref. part 18 43, S3219 VALVE CONTROL CLEAN DETERGENT PUMP ref. part 19 43, S3220 DRY FILTER ref. part 20 21, S3721 CLEAN DETERGENT PUMP ref. part , S3722 CLEAN DETERGENT ATOMIZER ref. part 22 78, S3223 HOSE FEEDING THE ATOMIZER ref. part 23 21, S3224 HOSE FEEDING THE PUMP ref. part 24 21, S3229 HOSE (CLEAN DETERGENT PUMP FEEDING) ref. part 29 57, S3229F FILTER FOR USED DETERGENT (ONLY FILTER) ref. part 29F 49, S3229S HOSE FEEDING THE USED DETERGENT PUMP ref. part 29S 65, S3231 PUMP FOR CLEAN DETERGENT ref. part , S3232 PUMP FOR USED DETERGENT ref. part , S3239 SAFETY VALVE FOR WASHER PUMP ref. part 39 65, S3244 DISCHARGE HOSE FOR USED DETERGENT ref. part 44 11, S3247 COLLECTING TANK ref. part , S3272 CONTROL PANEL ADHESIVE ref. part 72 25, S3274 EARTHING CABLE ref. part 74 19, S32H WASHING SUPPORT ref. part H 43, S32M ALUMINIUM HOSE KIT ref. part M 293, S32M1 CAPSTAN SCREW ref. part M1 6, S32M2 CROSSPIECE JOINT ref. part M2 29, S32PQ SPECIAL PLIERS ref. part PQ 17, S32R NET KNOB IN ALUMINIUM ref. part R 3, S32T WASHING MACHINE NOZZLES ref. part T 11, S32U ALUMINIUM NET ref. part U 53, S32V SPRAY NOZZLE ref. part V 35, S32Z INTERNAL SPRAY NOZZLE ref. part Z 29, PA46 STAINLESS STEEL SPRING ref. part PA46 39, PA57 DISCHARGE SILENCER ref. part PA57 9, PA58 AIR INLET FITTING ref. part PA58 7, PA38K COMPLETE INLET VALVE KIT ref. part 38-38A , PA44K COMPLETE OUTLET VALVE KIT ref. part , PA48K COMPLETE DIAPHRAGM KIT ref. part , PA54K PNEUMATIC VALVE COMPLETE ref. part ,97

35 INOX LINE SOL mod. SLD Spray Gun Washer - manual & automatic washing PUMP PA INOX LINE SOL mod. ILD Gun Wash DISTILLER (mod. SLD + DISTILLER) TECHNICAL CHARACTERISTICS SLD Mass 63 kg Dimensions 600 x 700 x 1490 mm Feeding air operating pressure 6 10 bar Air Consumption (8 bar) 9 Nm3/h Number of pump strokes n./min No. of guns that can be washed in a cycle 2 Capacity of each single container 25 lt. TECHNICAL CHARACTERISTICS ILD Mass 180 kg Capacity 12 lt. Operating temperature from 180 to 220 C Cycle Time 3 4,30 hours Power rating 1,04 Kw Protection EEx od IIB Temperature level T2 Dimensions 730 x 1270 x 1390 mm Certifications 35

36 DE-STAT UNIT De-Stat Anti Static Dust Neutraliser Unit The Anest Iwata De-Stat neutraliser removes dust from surfaces to be painted and neutralises the static charge on the product to avoid re-attraction and airborne dust in the environment The Anest Iwata De-Stat unit eliminates or reduces the need to rework painted components. The Anest Iwata De-Stat will also assist removal of static build up on the other materials. The advanced power unit uses A.C Low current technology to ionise the air from an air duster gun. The unit is limited to 5 milliamp and double earthed to meet safety standards. The power supply unit and ionising air duster gun have been tested and certificated to BS EN (1992) The power supply unit should be mounted outside the spray booth or painting area and the ionising air duster gun and cable should only be taken into the booth or painting area after painting has ceased and the exhaust purge cycle has removed solvent vapours. CODE: I-UK-AS001 1,000 TECHNICAL CHARACTERISTICS Max Air Consumption 105 L/min (3.7 cfm) Max Air Pressure 7 bar (100 PSI) Input Voltage 100/240AC Input current 0.2 Amps HZ Cycle 50/60 HZ Max Output Current 5 Milliamps 36 De-Stat Anti Static Dust Neutraliser Unit in spray booths and paint shops.

37 TRADING TERMS All orders are accepted in accordance with and subject to Anest Iwata (UK) Limited Standard Conditions of Business (Home and Export), copies of which are available on request. Where these Conditions of Business conflict with customers' Conditions of Purchase the Anest Iwata Conditions of Business shall prevail unless any express change has been previously agreed, in writing, by Anest Iwata (UK) Limited. MINIMUM ORDER CHARGES net for credit card transactions. PACKING AND CARRIAGE CHARGES 1. U.K. Mainland (excluding Scottish Highlands) a) Orders value and less than 30 kg weight will be despatched on our normal 3 working days carrier service. This excludes products such as infra-red, gun washmachines, distillers, can crushers and paper balers which are palletised goods for delivery. b) Carriage will be charged on all other orders as follows: Orders sent in Jiffy Bag (Small items at customers own risk) 4.35 Goods order value up to net and less than 30 kg Weight will be despatched on a 3 working day courier service 9.99 Goods over and less than 30kg Carriage Paid Next Day before 12:30 p.m Next Day before 10:30 a.m Saturday a.m An additional charge of 45p per kilo for weights exceeding the figures, shown will apply. Pallet (over 30kg) 3 working day delivery per pallet Republic of Ireland Order value up to net and less than 30kg N.B. Delivery times are estimates only and the Company shall not be liable for any delay in delivery c) Postal deliveries except for small items are not available due to size and nature of product and new postal practises. 2. U.K. Offshore, N. Ireland, Scottish Highlands and Export - carriage will be invoiced at cost prevailing at the time of despatch. 3. All products and spares are sold with a back to base warranty. A limited warranty may apply to some items. For full details of all Terms and Conditions, including warranty conditions, contact our sales office ( ) 4. Any claim for shortages or damage will not be considered unless reported by telephone on day of delivery and confirmed in writing within 7 days of delivery, or in the case of non delivery reported in writing within 21 days from date of despatch (as notified to the customer on invoices). Proof of delivery can only be supplied if requested, in writing, within 30 days from date of invoice: otherwise delivery will be deemed to have been made. In the case of delivery outside of the U.K mainland the time limits for reporting defective or non-delivery are 14 days and 30 days respectively and must be reported to the carrier too. RETURNS POLICY 1. Goods correctly supplied to customers' orders are not accepted for return. 2. In the event that we agree to the return of standard products, a returns note number will be issued and must be clearly shown on the outside of the packaging. A re-stocking charge of 35% will be deducted from any credit note due. 3. Special products produced to the customer's specification are not accepted for return. 4. A returns note number must be obtained before any goods are returned for service or repair and must be clearly shown on the outside of the packaging ( ) 5. Goods returned without a returns note number issued by ANEST IWATA will not be accepted into our distribution centre without prior notice given. Unidentified goods sent by post will be returned and charged accordingly to sender. SERVICE WORK 1. A returns note number must be obtained before any goods are returned for service or repair and must be clearly shown on the outside of the packaging. 2. A minimum 15 estimate charge will apply to all equipment sent back for service. NOTES 1. Prices, descriptions and specifications are correct at February 2009 and are subject to change without notice. 2. All prices in the Price List exclude V.A.T. 3. Errors and Omissions Excepted. SALES ORDER OFFICE 1. We do not accept responsibility for orders incorrectly supplied when placed with us by telephone. Written purchase orders placed by post, fax or will ensure correct goods to be supplied. 37

38 Legend Plastic Plastica Plastique Kunststoff Plast Plástico Plástica Nozzle orifice Diametro ugello Buse Düsendurchmesser Munstycksdiameter Diámetro pico Diâmetro do bico Delivery/cycle Portata per ciclo Volume/cycle Durchsatz/Zyklus Mängd/cykel Reparto/ciclos Ciclo da entrega Furniture Mobili Meubles Möbel Möbel Muebles Mobiliário Door/window-frames Serramenti Chassis porte/fenêtre Türen/Fensterrahmen Dörroch fönster Puertas/marcos ventanas Porta/janelas Air pressure Pressione aria Pression d'air Luftdruck Lufttryck Presión aire Pressão de ar No. of cycles per minute N di cicli al minuto N de cycle/min Anzahl Zyklen/Minute Antal cykler per minut Nº de ciclos por minuto Numero de ciclos por minuto Use Footwear Calzature Chaussures Schuhe Skor Calzado Sapatos Leather Pelletteria Cuir Leder Läder Cuero Peles Chairs Sedie Chaises Stühle Stolar Sillas Cadeiras Body shop Carrozzeria Carrosserie Karosseriewerkstatt Bil Carrocería Carroçaria Ceramics Ceramica Céramique Keramik Keramik Cerámica Cerâmica Car assembly Montaggio auto Construction auto Fahrzeugmontage Bil montering Automoción Montagem de carros Technical Specifications Air consumption Consumo aria Débit d'air Luftverbrauch Luftförbrukning Consumo aire Consumo de ar Fluid output Uscita materiale Débit produit Materialausfluss Material flöde Producción material Saida de material Pattern width Larghezza ventaglio Largeur de jet Spritzstrahlbreit Sprutbredd Ancho abanico Largura de leque Air cap set Ugello aria Chapeau Luftdüse Luftmunstycke Boquilla Espalhador Max. fluid pressure Max. pressione materiale Pression maxi. produit Max. Materialdruck Max. material tryck Máxima presión fluido Máxima pressão do bico Max fluid delivery Portata massima fluido Débit maximum Max. Materialdurchsatz Max. material utsläpp Caudal máximo de fluido Máximo fluido de distribuição Suction filter Filtro in aspirazione Filtre aspiration Filter f. Saugsystem Sugfilter Filtro succión Mala do filtro Suction filter Filtro in aspirazione Filtre aspiration Filter f. Saugsystem Sugfilter Filtro succión Mala do filtro Weight Peso Poids Gewicht Vikt Peso Peso Gun inlet voltage Voltaggio in entrata Tension d'entrée Eingang Spannung Ingående spänning Voltaje entrada Ship building Industria navale Industrie navale Schiffbau Varvsindustri Industria naval Industria naval Glasses Occhiali Lunettes Glas Glasogon Vidros Cristales Pressure ratio Rapporto di pressione Rapport de pression Druckangabe Tryckförhållande Relación de presión Pressão de proporção Gun outlet voltage Voltaggio in uscita Tension sortie Ausgang Spannung Utgående spänning Voltaje salida General industry Industria generica Industrie générale Allgemeine Industrie Generell industri Industria general Industria geral Max fluid pressure Pressione massima fluido Pression maxi. produit Max. Materialdruck Max. material tryck Máxima presión fluido Máxima pressão de saida Hose length Lunghezza tubo Longueur tuyau Schlauchlänge Slang längd Largo cable 38