Ma Dejun Vice chairman of IEC/TC61 WIC 12 Nov 2014 Tokyo, Japan INTERNATIONAL ELECTROTECHNICAL COMMISSION

Transcription

1 Ma Dejun Vice chairman of IEC/TC61 WIC 12 Nov 2014 Tokyo, Japan INTERNATIONAL ELECTROTECHNICAL COMMISSION

2 Brief Introduction of IEC Scope and Structure of IEC/TC61 Standardization of IEC/TC61 IEC Series Standards Conformity Assessment Regulatory Environments Developing Countries Participation in IEC/TC61

3 The International Electrotechnical Commission (IEC) is a not-for-profit, non-governmental organization, founded in IEC is the leading global organization that publishes consensus-based International Standards and manages conformity assessment systems for electric and electronic products, systems and services, collectively known as electrotechnology. IEC publications serve as a basis for national standardization and as references when drafting international tenders and contracts.

4

5 Scope To prepare safety requirements for electrical appliances primarily for household purposes, but also for other equipment and appliances in similar fields where there is no IEC Technical Committee in existence. NOTE 1: TC 61 does not deal with appliances which are already explicitly covered by the scope of other IEC Technical Committees. NOTE 2: The work of TC 61 in fields other than household may lead to a recommendation that the work on that particular project should be transferred to a new Technical Committee.

6 Officers: Position Chairman Vice-Chairman Secretary Assistant Secretary Technical Officer Name Mr Derek R. Johns (NZ) Mr Dejun Ma (CN) Ms Sonya M. Bird (US) Ms Margie M. Burk (US) Mr Timothy Joseph Rotti Membership

7 Structure: Subcommittees SC 61B Safety of microwave appliances for household and commercial use SC 61C Safety of refrigeration appliances for household and commercial use SC 61D Appliances for air-conditioning for household and similar purposes SC 61H Safety of electrically-operated farm appliances SC 61J Electrical motor-operated cleaning appliances for commercial use Working Groups WG 29 Ceiling fan suspension systems WG 30 Cosmetic and beauty appliances incorporating lasers and intense light sources WG 31 IEC Batteries WG 33 IEC Portable fan heaters Project Teams PT Particular requirements for integrated kitchen appliances Maintenance Teams MT 4 Temperature limits and resistance to heat and fire MT 15 Electrically heated blankets and similar appliances MT 16 Biological effects of radiation MT 23 Functional safety related aspects of electronic circuits, remote control of household appliances and insulation coordination MT 25 Electric drives for gates, doors, windows, shutters, awnings, blinds and similar equipment MT 26 IEC MT 32 Electrical commercial catering equipment Advisory Groups AG 28 Chairman's Advisory Group AG 34 TC61 Advisory Group

8 IEC standard content PART 1 - PART SERIES CURENTLY 94 STANDARDS IN THE SERIES Applying Part 1 on its own where there is no part 2 32 Clauses in each standard, including Scope Normative references Terms and definitions General requirement General conditions for the tests Classification and 26 test Clauses

9 IEC standard content TYPICAL HAZARDS COVERED Electric shock Examples of relational Clauses Clause 8 Protection against access to live parts Clause 13 Leakage current and electric strength at operating temperature Clause 16 Leakage current and electric strength Clause 29 Clearances, creepage distances and solid insulation

10 IEC standard content TYPICAL HAZARDS COVERED Mechanical Examples of relational Clauses Clause 20 Stability and mechanical hazards Clause 21 Mechanical strength

11 IEC standard content TYPICAL HAZARDS COVERED Burn and Fire Examples of relational Clauses Clause 11 Heating Clause 30 Resistance to heat and fire

12 IEC standard content TYPICAL HAZARDS COVERED Explosion Examples of relational Clauses Clause 22 Construction Clause 24 Components

13 IEC standard content TYPICAL HAZARDS COVERED Toxicity and Radiation Example of relational Clauses Clause 32 Radiation, toxicity and similar hazards

14 IEC standard content TYPICAL HAZARDS COVERED Firmware corruption Examples of relational Clauses Clause 19 Abnormal operation Clause 22 Construction

15 IEC standard content PART 1 Safety requirements applicable to majority of appliances Written to minimize the need for Part 2 specific safety requirements Safety mitigation for similar hazards in different appliances have similar solutions Minimizes test costs without compromising user safety

16 IEC standard content PARTS 2 Safety issue mitigation achieved by Confirming the Part 1 requirements Modifying the Part 1 requirements, or Adding to the Part 1 requirements Defined terms are written in bold type Where definition concerns an adjective, the adjective and associated noun are in bold type

17 IEC standard content AMENDMENTS AND NEW EDITIONS Part 1 written to minimize the need for Parts 2 alignment amendments Large amendments can lead to a new edition Small third amendments must result in a new edition Electronic publication reduces the need for the two amendment limit

18 IEC standard content APPLIANCE INDUSTRY CONCLUSION Allow the TC Officers to decide on a third amendment rather than a new edition Reduces costs to stakeholders Government regulators Manufacturers Consumers Test laboratories Certification bodies Retailers

19 IEC standard development and future developing direction Increase use of programmable electronic to provide Functional safety outcomes Power management control Remote interrogation and repair of faulty appliances Remote updating of appliance functionality Remote control of appliances

20 IEC standard development and future developing direction This trend introduces additional hazards Cyber security Software integrity Hostility of EM environment Caused by geographic, acclimate and using environment

21 IEC standard development and future developing direction These hazards addressed by Update of software validation processes Single fault robustness of electronic hardware Up-skilling staff and up-dating test equipment for both Manufacturers and test Laboratories

22 IEC standard development and future developing direction Consumers demanding even safer appliances Reduction in non-functional surface temperatures Reduce risk of burns to venerable persons Children Infirm persons Use of scientific data to select acceptable temperatures

23 IEC standard development and future developing direction NEW APPLIANCES Additional ways to provide safety information On a web site On a DVD at point of sale Additional ways of indicating that an appliance is operating Audible signal Visual signal

24 IEC standard development and future developing direction Changes to standards made as a result of Field reports of accidents New features Changes in societal expectations for protection of persons and the environment

25 PRE-MARKET APPROVAL SYSTEMS Product approval required before sale Approval issued based on test report to standard (essentially a type 1a system) Some systems require factory inspection and follow up sample testing (essentially a type 3 or type 4 or type 5 system) Scheme types are defined in ISO/IEC 17067

26 POST-MARKET SURVEILLANCE SYSTEMS Normally require an SDoC according to ISO/IEC Supporting documentation to ISO/IEC Test report to standard usually a defense in law Regulator can declare standard deficient

27 APPLIANCE INDUSTRY CONCLUSION Deliverables other than full consensus standards not acceptable to Regulators TC 61 only produces deliverable type IS

28 Manufacturer s use certified components if economic Some appliance manufacturer s assemble appliances from pre-certified components Other manufacturer s design and incorporate components into the appliance these components aspects not available for general sale Certification bodies need to recognize that one size does not fit all

29 Standards need to recognize that one size does not all Basic safety publications Group safety publications Horizontal standards must take this into account

30 Importance of developing countries participation With the background of globalization, developing countries as emerging economies are playing more and more important roles in global activities. It is a global market. Getting involved in the global market means more opportunities for both going abroad and developing better at home. International standardization is one of most effective ways to get involved in the global market. Household electric appliance industry is one of the most important industries that matters people s livelihood in all countries. It is curial for developing countries to participate in the standardization activities in the industry.

31 Current situations of the industry in developing countries We found that there are three major issues in developing countries regarding the household electric appliance industry. Issues of governmental supervision 1) deficiency in laws, regulations & standards; 2) poor implementation of laws, regulations and standards; and 3) deficiency in conformity assessment, and etc.. Issues of industry development 1) lack of competitiveness, such as lack of knowledge of frontiers of the industry, lack of core technology, lack of advanced manufacturing techniques; 2) deficiency in self-discipline, i.e., knowingly violate marking disciplines. Issues of consumers safety awareness/consuming habits, for example, consumers willing to compromise quality over cheap price.

32 How standardization activities of IEC/TC61 could help? IEC/TC61 is an international platform. IEC/TC61 is an resource intensive platform. Standardization is an effective way to solve the aforementioned problem. And standard itself is productivity to a certain extent. The standardization activities of IEC/TC61 could help to 1) Strengthen governmental supervision 2) Promote the industry development 3) Prevent consumers better 4) Enhance international trade

33 How standardization activities of IEC/TC61 could help? How to strengthen governmental supervision? Realize the importance of standards by participating IEC/TC61 standardization activities. Use standards as an effective means to regulate the industry. Borrow experiences from developed countries and IEC/TC61 to improve and complete national supervision system. How to promote the industry development? Cultivate the awareness that standard is an effective way to enhance the competitiveness of the industry. Learn the technology frontiers of the industry by participating in IEC/TC61. Build effective correlation between core technology and standard. They could mutual promote each other. Use standardization to realize better self-regulation of the industry.

34 How standardization activities of IEC/TC61 could help? How to prevent consumers better? Cultivate consumers safety awareness by providing standard knowledge. Guide consumers consuming habits. Provide high quality products to the market. How to enhance international trade? International standards could eliminate trade barriers, which lays the basis for international trade. Both the imported countries and exported countries could make the best use of international standardization to enhance international trade of the industry.

35 How to participate rules for participation IEC Statutes and rules of procedure: 2001 Plus A1 TO A7 For details please go to

36 How to participate rules for participation Referring to MEMBERSHIP (Article 4) Must form a National Committee (NC) Only one NC/Country Country must be recognised by the United Nations Organisation NC must fully represent national interests in IEC fields of activity Country can be Full Member or Associate Member

37 How to participate typical operation of a national committee Administration of NC usually by National Standards Organisation (NSO). For China NSO = SAC NSO sets up Mirror Committees (MC) for TC participation Interested Parties inform NSO to register as member of MC NSO issues Username and Password to MC members

38 How to participate typical operation of a national committee Helpful IEC documentation is freely available from IEC homepage IEC 60050: International Electrotechnical Vocabulary (IEV) also referred to as the Electropedia: IEC Glossary: Other: The Concise Oxford Dictionary

39 How to participate typical operation of a national committee ISO/IEC Directives Part 1, Part 2, IEC Supplement: IEC Published Standards: Standards Just Published:

40 How to participate typical operation of a national committee Corrigenda to standards found at: Committee issued interpretation sheets (I-SH) found at: Replaced/Withdraw Standards found at:

41 How to participate typical operation of a national committee Committee of Testing Laboratories (CTL) Decision Sheets (DSH): Documents release weekly set up MyNewDocs at: TC 61 Interpretations can be found using Collaboration Tools under TC 61 General

42 How to participate developing proposals for submission to TC61 Amendment for new features discuss first in the MC Make sure proposal does not disadvantage existing designs

43 How to participate developing proposals for submission to TC61 Amendments due to safety problems discuss in MC Show appliance complied with existing standard Provide field data to high-light safety problem Show where existing standard is deficient

44 How to participate developing proposals for submission to TC61 New standard for new appliance discuss in MC Ensure appliance is not covered by Scope of existing standard New standard must have global relevance Five NCs agree to participate in development Prepare draft to allow other NCs to see if they agree with the above

45 Ma Dejun Vice chairman of IEC/TC61 WIC 12 Nov 2014 Tokyo, Japan INTERNATIONAL ELECTROTECHNICAL COMMISSION