VERSATILE. collect 1. Wardrobe. Hallway unit. walk-in closets. Room divider. Display cabinet. Design: Heide & Kräling

Transcription

1 VERSATILE collect Wardrobe Hallway unit walk-in closets Room divider Display cabinet Design: Heide & Kräling collect 1

2 The collect collection Contents Collection information collect collect: one collection endless possibilities 4 Front variants and design 6 Colours 8 Handles 10 Inner compartments overview 13 Basic concept and descriptions 14 Element and front design 22 Outside wall shelving and open shelving elements 28 TV compartment 29 Room dividers 30 Walk-through element 31 Corner elements 32 Inner compartment attachment via perforated rails 34 LED-illuminated shelves 37 Interior module 38 Insert for wardrobe elements 38 Door interior fittings 39 Coat hangers 39 Inner compartments for interior and exterior drawers 40 Dividing walls 41 Wall panels 42 Wardrobe 44 Custom designs 46 In 1963, Swiss interior designer Walter Müller proposed that interlübke produce an endless wardrobe an element comprised of just a few components which, thanks to its modular design, could be expanded to a virtually endless degree. Under the name interlübke 61, the revolutionary design formed the core of a successful collection. Refined over time, the underlying concept is still evident today in the collect wardrobe collection. collect is extremely versatile: Universally suitable for bedrooms, living rooms, work spaces and corridors. A virtually endless number of combinations. This is ensured by: 7 door variants from lacquer to glass, wood and fabric 50 colours/surfaces + individual lacquer + custom lacquer 4 attractive interior colours 14 handles 13 pull-out elements for trousers, shoes and linen 12 interior drawers 6 interior cabinets 66 velour and leather dividers for drawers 8 inserts for wardrobe elements with storage boxes 8 storage boxes 5 fittings for door interiors Dividing walls to demarcate wardrobe elements in order to serve different functions Custom designs that enable you to adapt collect to any room The interlübke perforated rails on the interior walls of collect elements are unique. For optimal use of storage space, the interior fittings can be modified at any time using the precise 2.5 cm height grid without causing damage: height-adjustable upgradable Design: Rolf Heide, Peter Kräling 2 collect collect 3

3 collect: one collection endless possibilities collect: one collection endless possibilities As a wardrobe for the entrance area As a book and folder cabinet for the office As a wardrobe As a built-in wardrobe under sloping ceilings As a display cabinet for the dining room As a wall unit with a TV compartment and open shelf elements As a room divider instead of drywall dividing walls in hotels As a wardrobe with glass sliding doors As a living room shelf unit with no shelf walls to block the view For walk-in wardrobes As a wardrobe with glass hinged doors As a room divider for apartments As a wardrobe with open and closed areas 4 collect collect 5

4 Front variants and design Front variants and design Front variant Front/back Matt lacquer / matt lacquer metallic Matt lacquer / matt lacquer metallic Clear glass (Optiwhite) Clear glass (Optiwhite) Matt glass (Optiwhite) Complete matt lacquer Display case door with narrow frame in matt lacquer Complete matt lacquer Matt glass (Optiwhite) High-gloss lacquer Wood Mirror Fabric Display case door with narrow frame in matt lacquer Matt lacquer Wood Matt lacquer Matt lacquer Side cover profile for glass, mirror and fabric doors Standard: Matt lacquer in front colour Optional: aluminium polished Standard: Matt lacquer in front colour Optional: aluminium polished Standard: Matt lacquer in front colour Optional: aluminium polished Standard: Matt lacquer in front colour Optional: aluminium polished - - Standard: Aluminium polished Optional: Matt lacquer / matt lacquer metallic Matt lacquer / matt lacquer metallic / aluminium polished, please specify Colour key M.. S.. S.. T.. T.. M.. H1.. for wood group 1 H2.. for wood group 2 O80 W.. Design elements Outside walls Cover strips for outside walls Top closing panels for wardrobe Wall panels Hallway storage elements Matt lacquer / matt lacquer metallic Matt lacquer / matt lacquer metallic / aluminium polished Matt lacquer / matt lacquer metallic Matt lacquer / matt lacquer metallic Matt lacquer / matt lacquer metallic High-gloss lacquer Wood High-gloss lacquer Wood Wood Outside walls and top closing panel for wardrobe For individual design options, there are two different outside walls and a top closing panel available. Outside wall, flush with the front Outside wall with cover strip CPL: page 4 Outside wall, flush with the front An outside wall with a visible 2-cmthick front edge that extends to the floor lend collect wardrobes a minimalistic character. CPL: pages 4 Together with the 1-cm top closing panel for the wardrobe, the resulting frame creates a cosier atmosphere. Top closing panel for wardrobe and outside wall, flush with the front. CPL: page 4 Outside wall with cover strip Outside walls featuring 0.8-cm-wide cover strips on the front form refined side trim features that create different impressions depending on the colour and surface material. The cover strip is available in all matt lacquers or an aluminium polished finish. The visual effect is different time and again, whether it matches the colour at the front, comes in an accentuating tone or embraces an aluminium polished finish. To make the colour mix possible, the outside wall and cover strip must be ordered separately; see component price list page 4. CPL: page 12 Design tip: the vertical handle strip and the slot profile handle are perfectly coordinated with the cover strips. Please note: outside walls without cover strips are only suitable for further construction when fitting strips and corner strips are used. They can also be used to the left or right of walk-through elements and next to outside wall shelving. Planning width: 3.2 cm Planning width: 2.0 cm 6 collect collect 7

5 Colours and materials for fronts, outside walls, cover panels and wall panels Colours and materials for fronts, outside walls, cover panels and wall panels Matt lacquer Matt lacquer metallic High-gloss lacquers M03 snow-white M02 crystal-white M13 aluminium metallic M103 snow-white M14 platinum M06 alabaster M11 silver-grey metallic M102 crystal-white M29 fog M23 shell M10 bronze metallic M121 anthracite M21 anthracite M24 flint-grey M09 gold metallic M122 onyx M22 onyx M16 elephant Wood Textile fronts M80 laguna M49 rose quarz D70 natural oak W.. fabric lining M81 bahia M44 guave Glass fronts clear and matt B71 quartz ash M82 atlantic M42 mallow Back of glass fully lacquered M83 navy M41 burgundy B73 agate ash Back of glass lacquered with narrow frame M08 greige Individual lacquer/customised lacquer E70 natural walnut Back of glass fully lacquered or as a display case door with narrow frame in all 24 matt lacquers M36 mastic Individual lacquer matt without control sample Customised lacquer with control sample M37 manor M38 capparis M39 cardamom Order your custom colour as a matt lacquer based on the RAL, NCS and SIKKENS colour fans. Interlübke processes the order without sending you a control sample. This rule only applies for matt lacquer, not neon or metallic colours. Choose your colour on the basis of the RAL, NCS, SIKKENS colour fans or your own sample (minimum size DIN A4) and interlübke will produce the lacquer for you after approval of the control sample. These rules apply to all high-gloss surfaces and customer colours. The delivery date is set once the sample has been approved. C74 smoked pommele eucalyptus D75 bog oak M40 masala For details about individual and customised lacquer, see page 2 of the component price list. 8 collect collect 9

6 Handles Handles Bow-type handle Position: on both sides for double doors Colour: M21 anthracite coloured O19 aluminium polished O86 stainless steel coloured O13 aluminium coloured Height: 20.6 cm Width: 1.4 cm Depth: 3 cm Hole spacing: 19.2 cm Line handle, short, for single door Position: factory-installed, inserted in door edge; subsequent installation not possible Colour: O19 aluminium polished Height: 22.3 cm Width: 0.35 cm Depth: 1.8 cm Bar handle Position: on both sides for double doors Colour: O19 aluminium polished O13 aluminium coloured Height: 20.6 or 37 cm Width: 1.4 cm Depth: 2.6 cm Hole spacing: 19.2 or 35.6 cm Waisted doorknob Position: on both sides for double doors Colour: Base component O19 aluminium polished, Cover O19 aluminium polished, M.. Matt lacquer, M.. High-gloss lacquer Ø: 3 cm Depth: 2.5 cm Retractable doorknob Position: on both sides for double doors Colour: O19 aluminium polished Ø: 3 cm Depth: 2 / 1.7 cm Surcharge: 48, Ring handle Position: on both sides for double doors Colour: O19 aluminium polished Ø: 3.5 cm Height: 3.5 cm Depth: 3.5 cm Width: 1.2 cm 2 line handles, short, for double door Position: right handle at top/left handle at bottom. factory-installed, inserted in door edge subsequent installation not possible. Colour: O19 aluminium polished Height: 2 x 11 cm Width: 0.35 cm Depth: 1.8 cm Line handle, long, for single door Position: factory-installed in door edge, recessed, retroactive installation not possible Colour: O19 aluminium polished Height: cm (lower edge of door*) Width: 0.35 cm Depth: 1.8 cm Line handle, short, for drawers Position: factory-installed, inserted in drawer front subsequent installation not possible Colour: O19 aluminium polished Height: 11 cm Width: 0.35 cm Depth: 1.8 cm Recessed handle, small Position: recessed into door edge on left or right Combination example in conjunction with handle profile, horizontal, see below right Colour: O19 aluminium polished, M.. Matt lacquer Height: 3.1 cm Width: 7.5 cm Surcharge: 59, Recessed handle, large Position: horizontal, recessed in middle of front Colour: O19 aluminium polished, M.. Matt lacquer Height: 3.1 cm Width: 15.4 cm Surcharge: 114, 2 line handles, short and long for double doors Position: right handle at top/left handle at bottom. Factory-installed in door edge, recessed, retroactive installation not possible. Colour: O19 aluminium polished Height: 91 cm (door left*) 11 cm (door right) Width: 0.35 cm Depth: 1.8 cm *Height measured from the lower edge of the door Handle strip, horizontal for divided hinged doors and drawers Position: low profile in lower edge of hinged doors High profile in upper edge of hinged doors and drawers Colour: O19 aluminium polished, M.. Matt lacquer Height: 2.8 cm Width: same as front Combination example for recessed handle, small, together with horizontal handle profile in M.. Matt lacquer Combination of recessed handle, small, and handle profile for O19 aluminium polished is not possible due to material-related colour differences 10 collect collect 11

7 Handles and lock Interior compartments overview Attached to the perforated rail Fastened to wardrobe or shelf Fastened to inside of door Other Interior shelf Handle strip, vertical Recessed in side of front edge, only on right for double doors Colour: O19 aluminium polished, M.. Matt lacquer Height: same as door Width: 0.7 cm Depth: 2.8 cm Line profile handle Recessed in side of front edge, only on right for double doors Colour: O19 aluminium polished, M.. Matt lacquer Height: (from lower edge of right door) Width: 0.7 cm Depth: 2.8 cm Inset handle Recessed in side of front edge, only on right for double doors Colour: M.. Matt lacquer Height: 18.2 cm Width: 1.6 cm Surcharge: 59, Shelf with hanging rail Hanging rail Clothes lift Tie/belt holder Shoe rack Pull-out shoe holder Handle Griff Open closed Which handles are suitable for which doors? Lock with flip key and integrated spare key Position: 4.5 cm from the respective handle Not possible in combination with slot handles. Colour: Lock O86, stainless steel coloured, key O20 black Depth: 37.3 / 44.7 cm for elements with locks, the shelves are shortened by 1.4 cm in depth in the factory. Surcharge: 95, Linen rack Pull-out trouser holder Pull-out linen rack Interior drawers Interior module for interior drawers/pull-out linen rack Interior mirror with tie holder/paraphernalia tray Interior mirror Hinged doors Sliding doors Coplanar gliding doors Folding doors Swivel doors Exterior drawers in general Lacquer/ wood Glass/mirror/ fabric Lacquer/ wood Glass/mirror/ fabric Lacquer/ wood Glass/mirror/ fabric Lacquer/ wood Glass/mirror/ fabric Lacquer/ wood Glass/mirror/ fabric Bow-type handle BAr handle 20.6 / 37.0 Line handle Waisted doorknob Retractable doorknob Ring handle Recessed handle, small Recessed handle, large Handle strip, horizontal* Handle strip, vertical Slot profile handle Inset handle Lock Only mirror/ fabric Tie/belt holder Storage boxes interlübke coat hanger Illuminated shelves * not for divided fronts 12 collect collect 13

8 Basic concept and descriptions Basic concept and descriptions General product information Four wardrobe height options 231 / 243 / 267 / 297 cm. Three wardrobe depths 37.3 / 44.7 / 64.5 cm. Minimum gap to ceiling of 2 cm, minimum gap to wall of 1 cm. The wardrobe must be fastened to the wall or ceiling. For adjustment to uneven floors, the outer and outer and middle walls are equipped with fittings whose height can be adjusted by up to 2 cm. The interior surfaces of the outer and middle walls feature a perforated rail system with an adjustment distance of 2.5 cm. Single element Double element Wardrobe elements Pages 13 / Inner compartments Pages 6 7 / Outside walls Hinged doors fully finished in lacquer, glass, mirror, wood or fabric Hinged door above middle shelf in lacquer, glass, mirror, wood or fabric Middle shelf, fixed Middle walls Allgemeine Produkthinweise: - Vier Schrankhöhen 231,0/ 243,0/ 267,0/ 297,0 cm. - Drei Schranktiefen 37,3/ 44,7/ 34,5 cm. - Montagehöhe mindestens 2,0 cm und in der Breite 1,0 cm. - Der Schrank ist generell an der Wand oder Decke zu befestigen. - Die Aussenseiten und Mittelwände sind zum Anpassen an unebenen Böden unten mit Beschlägen versehen die in der Höhe um bis 2.0cm verstellbar sind. Exterior drawers (lacquer/wood) and hinged doors (lacquer, glass, mirror, wood, fabric) beneath middle shelf 14 collect collect 15

9 Basic concept and descriptions Sliding door wardrobes Basic concept and descriptions Coplanar gliding door wardrobes 2-door sliding door wardrobes Minimum gap to ceiling of 3.5 cm Page 24 Wardrobe elements 2-door coplanar gliding door wardrobes Minimum gap to ceiling of 3.5 cm Page 26 Wardrobe elements Pages 24, 27 Sliding doors incl. handle strip Door in lacquer, glass, mirror, wood, fabric Door width: 84 / 110 cm Pages 13 / Inner compartments Pages 6 7 / Outside walls Pages 24, 27 Sliding doors incl. handle strip Door in lacquer, glass, display case, mirror, wood, fabric. Visual design with horizontal joints, colour and material mix possible Door width: 84 / 110 / 140 / 170 cm Pages 6 7 / Outside walls Pages 13 / Inner compartments Page Gliding doors with handle in lacquer, glass, mirror, wood, fabric Door width: 84 / 110 / 140 / 170 cm Page 12 Handles 3-door sliding door wardrobes Minimum gap to ceiling of 3.5 cm 71,0 64,5 Page 25 Wardrobe elements Pages 13 / Inner compartments Pages 6 7 / Outside walls Pages 25, 27 Sliding doors incl. handle strip Door in lacquer, glass, mirror, wood, fabric Door width: 84 / 110 cm Pages 25, 27 Sliding doors incl. handle strip Door in lacquer, glass, mirror, wood, fabric. Visual design with horizontal joints, colour and material mix possible Door width: 84 / 110 / 140 / 170 cm 16 collect collect 17

10 Basic concept and descriptions Open shelving elements/tv element Basic concept and descriptions Room divider elements/walk-through elements Open shelving elements Minimum gap to ceiling of 2 cm Room divider elements Minimum gap to ceiling of 2 cm Page 28 Outside wall shelving Page 7 Outside wall for cover profile Page 6 Outside wall, flush with the front Page 28 Back panel Page 28 Construction shelves Page 28 Special middle wall with 12-cm drilling grid Page 30 Room-divider, back panel Page 30 Front and rear hinged doors Page 30 Room divider, wardrobe element Page 30 Room divider, shelves Page 28 Special outside wall with 12-cm drilling grid Page 30 Room divider, outside walls Page 30 Hinged doors Page 30 Room divider, middle walls Page 28 Plinth shelf TV element Wardrobe elements Pages 13 / Inner compartments Hinged door above middle shelf (middle shelf not required) Walk-through elements plan room divider elements on the reverse side Minimum gap to ceiling of 2 cm Swivel door Swivel door only for width of 84 cm Page 31 Top for walk-through element Page 31 Swivel door Folding door Folding door only for width of 84 / 110 cm Page 31 Top for walk-through element Page 31 Folding door Page 29 TV element with top and base, walls, TV panel Page 6 Outside wall for cover strip Page 6 Outside wall for cover strip Page 29 Exterior drawers / device flap under hinged doors of TV compartment 18 collect collect 19

11 Basic concept and descriptions Corner elements Basic concept and descriptions Wall panels and wardrobe Corner element with front corner strip Corner element without front corner strip Wall panels for walk-in wardrobes, living rooms and dining rooms Minimum gap to ceiling of 2 cm Wardrobe elements Pages Wall panel Page 42 Closing panel Pages 6 7 / Outside wall Pages Removable shelves and hanging rails for corner elements Pages Shelf for wall panel. Also available as an LED-illuminated shelf. Pages Combination shelf support arms for adjacent shelves of different depths Pages Support arms 33.4 / 40.8 / 53.3 cm Pages Support arms for suspended element and shelves Page 32 Hinged door / alternative sliding doors Hinged door Page 33 Swivel door Pages Drawers in the suspended element Pages Suspended element at 10 different heights Page 32 Corner element with front corner strip Page 33 Corner element without front corner strip Hallway Storage Wardrobe element Pages Individually combinable elements Pages 7 / Outside wall without cover profile Pages 6 7 / Outside wall Hinged door Pages Pre-planned panels 20 collect collect 21

12 1. Element and front design with hinged doors 1. Element and front design with hinged doors Start with the left outside wall: outside wall flush with the front or outside wall with cover strip. Plan the wardrobe elements and middle walls successively from left to right until the desired wardrobe width is achieved. Finish your planning with a right outside wall: outside wall flush with the front or outside wall with cover strip. Decide which (if any) wardrobe elements should be enclosed with a front (i.e. a single- or double-hinged door). For single-hinged doors, specify whether door hinges should be on the left or right. For divided hinged doors, a fixed middle shelf at the level of the horizontal joint + 1 hinged door above the middle shelf + 1 hinged door below the middle shelf are required (exterior drawer under the middle shelf; see CPL: pages 6 12) To find out which handles go with which fronts, see page 12. CPL: pages 4 Outside wall CPL: pages 6/10 Wardrobe element 41 / 54 cm wide, for 1 hinged door CPL: pages 4 Middle wall CPL: pages 8 12 Middle shelf, fixed, behind divided hinged doors; alternatively 2 4 drawers at bottom CPL: pages 8/12 Wardrobe element 84 / 110 cm wide, for 2 hinged doors Hinged doors design with vertical handle strip CPL: pages 6/10 1 hinged door for 41 / 54-cm-wide wardrobe elements CPL: pages 8/12 2 hinged doors for 84 / 110-cm-wide wardrobe elements CPL: pages hinged door above middle shelf Hinged doors with small recessed handle, combined with divided hinged doors and drawers with horizontal handle strip CPL: pages hinged door below middle shelf; alternatively 2 4 drawers at bottom 22 collect collect 23

13 2a. Element and front design with 2 sliding doors 2b. Element and front design with 3 sliding doors When closed, the sliding doors are in front of each other. For visual design options, there are two door variants: vertical look (without joints) and horizontal look with three sections. They are always equipped with a vertical handle strip. Start with the left outside wall: outside wall flush with the front or outside wall with cover strip. Take a pre-planned wardrobe element with a width of 170 / 222 / / / or cm for two or three sliding doors. Finish your planning with a right outside wall: outside wall flush with the front or outside wall with cover strip. Specify whether the left or right door should be at the front. Then choose the visual design of the sliding door: vertical look (without joints) or horizontal look with three sections, which can also feature different design elements. Please specify the handle strip design. Minimum gap to ceiling of 3.5 cm, minimum gap to wall of 1 cm. CPL: pages 14, 16, 20, 24 Pre-planned wardrobe elements for two sliding doors Different division schemes possible CPL: pages 18, 22, 26, 28 Pre-planned wardrobe elements for two sliding doors Different division schemes possible CPL: pages 4 Outside wall CPL: pages 4 Outside wall CPL: pages 14, 16 Vertical front look CPL: pages 14, 16, 18 Horizontal front look with 3 sections CPL: pages 18, 22 Vertical front look CPL: pages 18, 22, 26, 28 Horizontal front look with 3 sections Handle strip Handle strip 24 collect collect 25

14 3. Element and front design with coplanar gliding doors Sliding and coplanar gliding doors configuration Coplanar giding doors sit next to one other when closed. They can be equipped with different handles. Start with the left outside wall: outside wall flush with the front or outside wall for cover strip. Take a pre-planned wardrobe element with a width of 170 / 222 / or for gliding doors. Finish your planning with a right outside wall: outside wall flush with the front or outside wall with cover strip. Specify the gliding door and handle variant. To find out which handles are available for which gliding doors, see page 12. Minimum gap to ceiling of 3.5 cm, minimum gap to wall of 1 cm. CPL: pages 4 Outside wall CPL: pages 14, 16, 20, 24 Pre-planned wardrobe elements for two gliding doors Different division schemes possible Sliding door Coplanar gliding door Width in cm Two doors Three doors Two doors Visual design Dimensions without outside wall For widths over cm, doors have a vertical joint Top view CPL: pages 14, 16, 20, 24 Coplanar gilding doors, 1 set Page 12 Handles 26 collect collect 27

15 Outside wall shelving and open shelving elements TV compartment with fixed or swivel-mounted panel for TV Front-flush outside walls (planning width 3.2 cm) between the wardrobe element and open element automatically come with a drilling grid featuring 12-cm gaps between the holes for mounting the construction shelves. Outside wall shelving Outside wall shelving disrupts the bulky look of the wardrobe sides and creates a cosier atmosphere. The front side adopts the front design style. An outside wall for the cover strip is planned to be fitted between the outside wall shelving and the adjoining wardrobe element. Width: 25 cm Height: 231 / 243 / 267 cm For shelf depths: 37.3 / 44.7 / 64.5 cm Minimum gap to ceiling of 2 cm CPL: page 4 Outside wall, flush with the front CPL: page 4 Outside wall for cover strip Open shelving elements Planning in addition to wardrobe elements: Please plan for an outside wall, flush with the front, between the wardrobe element and an open shelving element. Free-standing planning: please plan the front-flush, special outside wall. The corresponding special middle wall is planned for the space between open elements. Please specify the number of construction shelves. For the bottom module, the plinth shelf is required; for the back modules, the rear wall is required. Width of construction/ plinth shelves, rear wall: 40 / 50 / 69.7 / 83.3 / cm for each special outside/middle wall or 3.2 cm per front-flush outside wall Height: 231 / 243 / 267 / 297 cm Depth, flush with front: 37.3 / 44.7 cm Special outside and middle walls (planning width of 2 cm) for free-standing open shelving elements or between two or more open shelving elements always have a drilling grid with a gap of 12 cm between holes for mounting the construction shelves. CPL: page 32 Back panel CPL: page 32 Special middle wall CPL: page 32 Construction shelves TV compartment with fixed mounting panel for TV The fixed mounting panel can be equipped with a swivel fitting for a flat-screen TV. Width: 84 / 110 cm Height: 59.6 / 79.9 cm Depth: 37.3 / 44.7 / 64.5 cm CPL: pages 8 / 12 Wardrobe element When planning the TV compartment, the left side of the back wall features two standard rectangular cable inlets CPL: pages 8 / 12 Divided hinged doors TV compartment with swivel-mounted panel for TV Behind the swivel-mounted panel, provide one or two fixed shelves of additional storage space (depending on compartment height). Width: cm Height: cm Depth: cm Shelf depth: 20.8 / 40.6 cm Under the TV, a flap can be planned instead of a drawer for housing devices. CPL: page 32 Special outside wall CPL: page 34 Outside wall shelving CPL: page 32 Plinth shelves Pages 8 / 12 Two to four exterior drawers Flap possible under TV compartment CPL: page 36 TV compartment with a fixed mounting panel for TV, incl. front-flush, 1-cmthick top and bottom shelf as well as 1.6-cm-thick walls. Mounting panel with cable inlet. CPL: page 36 TV compartment with a swivel-mounted panel for TV, incl. front-flush, 1-cm-thick top and bottom shelf as well as 1.6-cm-thick walls. Mounting panel with cable inlet 28 collect collect 29

16 Room dividers Walk-through element Room divider planning - Start with a left room divider outside wall, front-flush, or room divider outside wall with cover strip. - Plan the room divider wardrobe elements and room divider middle walls until the desired wardrobe width has been reached. - Complete planning with a right room divider outside wall, flush with front, or room divider outside wall with cover strip. Removable and LED-illuminated shelves are available for double-sided hinged doors. For this purpose, please order standard and LED-illuminated shelves (modified in the factory). It is not possible to have pull-out elements, interior drawers, interior modules and inserts with storage boxes for double-sided hinged doors. Minimum gap to ceiling of 2 cm including hidden ceiling attachment. Alternatively, wall attachment required on at least one side. Photo: Room divider and walk-through element with folding door Room divider walk-through element with folding and hinged door, see CPL: pages Walk-through element with hinged door To the left and right of the walk-through element, plan outside walls for cover strips, and above the swivel door the top for the walk-through element. The swivel door can swivel to the left or right. The shelf has no fittings. Walk-through element with folding door To the left and right of the walk-through element, plan outside walls for cover strips, and above the folding door the top for the walk-through element. The shelf has no fittings. CPL: pages Room-divider, back panel Width: 84 cm Height: 231 / 243 / 267 / 297 cm Depth: 37.3 / 44.7 / 64.5 cm Width: 84 / 110 cm Height: 231 / 243 / 267 / 297 cm Depth: 37.3 / 44.7 / 64.5 cm CPL: pages 6 13 Front and rear hinged doors CPL: pages Room divider, wardrobe element Swivel door; on the back side of the room divider element, plan a minimum gap to the ceiling of 2 cm Folding door; on the back side of the room divider element, plan a minimum gap to the ceiling of 2 cm CPL: pages Room divider, shelves Swivel door only for width of 84 cm Folding door only for width of 84 / 110 cm CPL: pages 4 Room divider, outside walls CPL: pages 6 13 Hinged doors CPL: pages 4 Room divider, middle walls CPL: pages 42 Top for walk-through element CPL: pages 42 Swivel door CPL: pages 4 Outside wall for cover strip CPL: pages 42 Top for walk-through element CPL: pages 42 Folding door CPL: pages 4 Outside wall for cover strip 2 sides, open 2 sides, hinged door 1 side, back wall/ 1 side, hinged doors 1 side, back wall/ 1 sides, open 1 side, hinged doors/ 1 sides, open Folding door only for walk-through element 30 collect collect 31

17 Corner elements with front corner strip Corner elements without front corner strip Minimum gap to ceiling of 3.5 cm Corner element with front corner strip for optimal use of storage space up to the corner of wall. There is a front corner strip between the swivel, hinged or sliding doors on opposite sides of the corner. For the corner element with the front corner strip, there are special shelves and hanging rails that can be planned individually for each section. Section dimensions: 72 x 72 cm Height: 231 / 243 / 267 / 297 cm Depth: 64.5 cm Hinged and swivel door next to corner element Swivel door to left and right of the corner element Corner element without front corner strip with supporting rod in the corner element for optimal use of storage space up to the corner of wall. Hinged and/or swivel doors can be planned to the left and right of the corner element. For the corner element without a front corner strip, there are special shelves and hanging rails that can be planned individually for each section. Section dimensions: 65.5 x 65.5 cm Height: 231 / 243 / 267 / 297 cm Depth: 64.5 cm CPL: pages 30 Corner element with front corner strip Minimum gap to ceiling of 3.5 cm 72 cm CPL: pages 30 Corner element without front corner strip 65.5 cm CPL: pages 48/60 Shelves, hanging rails CPL: pages 48/60 Shelves, hanging rails Combination of hinged/swivel door is possible. Combination with two hinged doors only possible with wide-angle hinges and a door without handles so that the hinged doors can open. Hinged door with hinge on the front corner strip possible. Depiction of hinged doors to the left and right on the front corner strip. Possible with swivel door, only 84 cm wide, on one side. 72 cm Sliding doors only possible with front corner strip. Necessary on both sides around corner, not combinable with hinged or swivel doors. 72 cm 72 cm 72 cm 65 cm 65 cm Combination of swivel doors on both sides 65 cm 65 cm 32 collect collect 33

18 Interior compartments attached to perforated rail Interior attachment in perforated rail The interlübke perforated rails on the inside walls of wardrobes are extraordinary. Finished in the interior wall colour white, shell or anthracite and recessed flush with the wall, their presence is discreet and tasteful. The following interior compartments and illuminated shelves are attached to the perforated rails. For optimal use of storage space, the interior compartments can be adapted at any time without causing damage thanks to the perforated rails, enabling simple: - height adjustment - upgrades The adjustment distance is 2.5 cm. Metal elements such as hanging rails and linen racks have a stainless steel-coloured surface. Spacer elements and front panels for the pull-out elements come in the wardrobe interior colour as standard. Other matt lacquers are available as options. Front panels of the pull-out elements are also available in high-gloss lacquer and veneer. The hinge positions of the doors do not need to be taken into account when planning the interior compartments. Shoe rack, not retractable Extendible shoe holder with two levels. Both levels are equipped with cashmere-grey anti-slip board insert. For the planning of additional pull-outs, please state the position and take the shoe heights into account. Pull-out shoe holder, minimum installation height: 20 cm For the planning of additional pull-out elements, please specify the position and take the shoe height into account Hanging rail on removable shelf, maximum load of 40 kg The maximum load for removable shelves is 30 kg. For glass shelves, the maximum load is 9 kg Pull-out trouser rack, maximum load of 17 kg Wardrobe element width no. of rods: 54 cm wide 4 pcs 84 cm wide 8 pcs 110 cm wide 11 pcs Pull-out with trousers rail, interlübke trousers hanger with anti-slip coating and storage space for utensils, maximum load of 17 kg. Clothes lift surface, aluminium-coloured Maximum load of 10 kg Tie and belt holder with optional hooks Hanging rail in perforated rail. The fastening strip provides space for ties, scarves and optional hooks for belts Maximum load of 40 kg Pull-out linen rack Usable depth: 49.4 cm Usable width: 41 = 34.8 / 54 = 47.8 / 84 = 77.8 / 110 = cm Linen rack, maximum load of 17 kg 34 collect collect 35

19 Interior compartments attached to perforated rail LED-illuminated shelves attached to perforated rail Low, middle and high interior drawers. With handle gap above. The graphic interior drawers with only 0.4 cm aluminium sides in warm cashmere grey are exclusive to interlübke. The underfloor full pull-outs are equipped with the latest technology and a cushioned self-closing mechanism. The maximum load is 17 kg Interior drawer with grey glass front. With handle gap above. Maximum load is 17 kg. For the unique LED-illuminated shelves, the matt glass surfaces ensure that light is diffused both upwards and downwards. This guarantees uniform, pleasant and glare-free illumination of the wardrobe interior. And is completed by the colour temperature control and dimming. Thanks to the conductor strip in the wardrobe walls, LED-illuminated shelves with and without hanging rails can be adjusted in terms of height and upgraded at any time just like standard shelves and without elaborate rewiring. The conducting strip is virtually invisible behind the rear perforated rail. To connect the power supply, a power feed set is required; see example below. The price of the power feed sets includes factory installation of the conductor strip. The interior drawers, laundry pull-outs, washing baskets, trouser pull-outs and shoe pull-outs are attached to the perforated rails with distance rails and can therefore be adjusted in terms of their height and can be retrofitted at any time. The individual distance rails are included in the price. The light switches on and off when the doors are opened and closed, respectively (inductive light switch). Interior spacer elements attached to perforated rail Removable shelf optional For units with glass doors and without hinged doors for walk-in wardrobes, switch on/off ensued by the radio-controlled switch set. Interior drawer, pull-out linen rack; linen rack, linen basket, pull-out trouser rack,pull-out shoe holder Width: 41 / 54 / 84 / 110 cm Depth: 37.3 / 44.7 / 64.5 cm Planning examples for LED-illuminated shelves CPL-Page Feed-in sets 1. basic set W0911 inkl. power supply set 72W 2. extension set W extension set W0912 inkl. power supply set 72W 4. extension set W0913 End-to-end spacer elements attached to perforated rail Individual spacer elements when space between the pull-out elements is planned CPL-Page Feed-in sets 1. basic set W0911 incl. power supply set 72W 2. extension set W extension set W0912 incl. power supply set 72W CPL-Page Feed-in sets 1. basic set W0911 inkl. power supply set 72W 2. extension set W extension set W extension set W0913 Removable shelf optional End-to-end spacer elements for interior drawers and linen basket arranged on top of one other Max. spacer element height: 75 cm Planning examples 30 W 30 W 30 W 7 W 7 W 7 W 7 W 22 W 22 W 33 W 33 W 36 collect collect 37

20 Wardrobe wall lighting, protection mats for ring binders Interior compartments inner module and rondel Inner module for interior drawers and pull-out linen rack Installation on the base of the wardrobe element. CPL: pages 52 Interior module Inner modules are used to divide wardrobe elements in the lower wardrobe area. In addition to the interior module, there is also space for long, hanging items of clothing, for example. Example set-up of a 95-cm-high interior module with - two low interior drawers, each 7.5 cm high - a medium-height interior drawer 15 cm high - two high interior drawers, each 30 cm high Inner modules can be installed directly next to the wardrobe wall or on the wardrobe floor with a gap to the wall. Interior drawers come standard with handle lip; bow-type handle available for a surcharge of 20. Widths: 41 / 54 and 84 cm Heights: 65 and 95 cm Depth: 53.3 for 64.5-cm-deep wardrobe element The inner module consists of two walls, a top and a base, and a rear wall. 4 or 6 interior drawers, 15 cm in height, must be ordered separately. Alternatively, there are 7.5-cm and 30-cm-high interior drawers. The new dimmable wardrobe wall lighting with colour temperature control is integrated into the wardrobe wall behind the front perforated rail. Only 0.6 cm deep, the profile directs the light backwards so that the rear wardrobe wall is also illuminated and the lighting does not blind from the front. It runs along the entire height of the outside and middle walls, ending in the plinth area. Removable shelves, shelf trays, pull-out linen drawers, spacer elements for interior draws, pull-out elements and pull-down hanging rail as well as interior modules can easily be installed in front of the wardrobe wall lighting. A power feed set is required for the power supply. Switching takes place by opening the doors. For units with glass doors or without hinged doors for walk-in wardrobes, switch on/off ensured by the radio-controlled switch set. Wardrobe element width: 41.0 / 54.0 cm with 1 x wardrobe lighting on the hinge side. For wardrobe elements as well as sliding and gliding door elements, please specify whether the wardrobe lighting should be integrated on the left or right. Wardrobe element width: 84.0 / cm with 2 x wardrobe lighting Width: 1.2 cm Height: 231 / 234 / 267 / 297 cm Rondel The rondel with 5 height-adjustable rotary shelves is attached to the specially equipped base of the cabinet wardrobe element and under a removable shelf to be ordered separately. Optional for rotary shelves: Semi-circle pillowbox and board insert Protection mat for ring binders for removable shelves, colour: transparent Width: 41 / 54 / 84 / 110 cm Rondel for wardrobe element from width of 54 cm 38 collect collect 39

21 Interior compartments door interior equipment, storage boxes, coat hangers Dividing walls Interior mirror with concealed rows of holes to mount the paraphernalia tray and tie rail. For hinged doors of 41 cm or wider. Mirror height: The utensil tray and tie rail for the interior mirror can also be ordered separately. Optional hooks for the tie rail are also available. Interior mirror for installation on site. For hinged doors of 41 cm or wider. Mirror height: Tie and belt holder, hinged. Ideal for scarves as well. For hinged doors of 41 cm or wider. Dividing walls and cover shelves are used to divide wardrobe elements so that within an element, features such as hanging rails and removable shelves are positioned next to each other in an accessible way. At the same time, the space in small wardrobes is put to optimal use. 1. Dividing wall at wardrobe element height 2. Dividing wall at variable heights 2a Cover shelf at width of wardrobe element over dividing wall at variable height 2b Cover shelf at compartment width (one-sided) over dividing wall at variable height Storage boxes in shell melange fabric design Storage boxes without lids with leather handle strap along the bottom edge are available in Width: 36.4 / 49.4 cm Height: 10.9 / 23.4 cm Depth: 52.8 cm Storage boxes with lids and leather handle strap are available in: Width: 37 / 48 cm Height: 16 / 24 cm Depth: 48 cm Coat hangers for suits Coat hangers with clips Coat hangers with trouser clips Coat hangers for men Coat hangers for women The matt lacquer surface in shell features the interlübke logo. Dividing walls in desired height (2.) Dividing walls with cover shelf to the width of the wardrobe element (2a.) CPL: page 64 Dividing wall at element height (1) CPL: page 64 Dividing wall at desired height (2), note 7.5-cm grid for interior compartments CPL: pages 46, 50, 52, 56 Interior compartments illuminated shelves and hanging rail attached to perforated rail not possible Room dividers with doors on both sides and LED-illuminated shelves are not possible for dividing walls. CPL: page 64 Cover shelf at element width over dividing wall (2b) CPL: page 64 Cover shelf at compartment width over dividing wall (2a) 40 collect collect 41

22 Wall panels Wall panels Always start on the left with the closing panel. The closing panel is available at a fixed width of 5.3 cm for freely suspended wall panels. Alternatively, the variable-width closing panel is available for attachment to the wall. The wall panels for walk-in wardrobes, living rooms, offices and corridors enable extremely open, simple plans without shelf walls. CPL: pages 72 Shelf/LED-illuminated shelf Mounted by support arms attached to the wall panels Width: 41 / 54.4 / 84 / 110 cm Depth: 37.3 / 44.7 / 64.5 cm (total depth) CPL: pages 70 Support arm for insertion into the rail between the wall panels. Two shelves/suspended elements are attached to a support arm. Depth: 37.3 / 44.7 / 64.5 cm (total depth) Shelves with and without hanging rail, LED-illuminated shelves and suspended elements can be rearranged on the wall panels at any time (even after mounting). They are attached to the wall via support arms inserted into the vertical rails, which are positioned between the wall panels to ensure invisibility. CPL: pages 68 Wall panel on right with a rail for inserting support arms. Width: 41.3 / 54.3 / 84.3 / cm (incl. rail) Height: 231 / 243 / 267 cm Depth: 6 cm Combination support arm between shelves of different depths Wall panel planning dimensions Centre joint centre joint: 41.3 / 54.3 / 84.3 / cm Then plan the 40 / 54 / 84 or 110-cm-wide wall panels. They are equipped with a vertical rail into which the support arms for shelves and suspended elements for drawers and pull-out elements are inserted. Between two shelves or suspended elements at the same planning height, only one support arm is required. For different planning heights, both shelves require a support arm. Once again, the closure on the right is either the 5.2-cm-wide wall closing panel or the variable-width closing panel. For the wall panels, select from among all interlübke matt lacquers or wood. For shelves, LED-illuminated shelves and suspended elements, the four interior colours white, grey, crystal white, anthracite and shell are available. Closing panel Conductor rail in wall panel CPL: pages 68 Closing panel as the end point of a wall panel plan Left closing panel with rail Right closing panel without rail Width: 5.2 cm or variable up to max cm Height: 231 / 243 / 267 cm Depth: 6 cm CPL: pages 74 Suspended element Suspended on support arms attached to the wall panels. Width: 41 / 54.4 / 84 / 110 cm Height: 10 / 17.5 / 25 / 32.5 / 40 / 47.5 / 55 / 62.5 / 70 / 77.5 cm Depth: 64.5 cm (total depth) CPL: pages 76 Drawers for suspended elements Width: 41 / 54 / 84 / 110 cm Height: 7.5 / 15 / 30 cm Depth: 64.5 cm (total depth) CPL: pages 68 Inside corner wall panel (Fig. at left) left or right with adjoining corner panel Width: 43.1 / 50.5 / 63 cm Height: 231 / 243 / 267 cm Depth: 9.5 cm For the power supply to the LEDilluminated shelves, an elegant conductor rail is recessed in the wall panel on the left and right. This makes it easy to adjust the height or add to the LED-illuminated shelves without wires at any time. Tip: plan for the power source to be fitted behind or above the wall panels. For the power supply to the conductor rails, please order the basic set for illumination and extension sets. Once the transformer's maximum output of 64W is reached, please add additional extension sets with an additional transformer. Support arm in the vertical rail between wall panels for individual shelves or between two shelves 42 collect collect 43

23 Hallway Storage Hallway Storage - planning example To ensure simple planning, there are pre-assembled wardrobe panels with a wide variety of features available from illuminated shelves and wardrobe hooks to illuminated utensil boxes in the widths 41 / 54 cm and in the heights 213 / 243 and 267 cm. Alternatively, the wardrobe panels can be assembled piece by piece from the individual elements. Hallway Storage elements measuring 37.3 / 44.7 or 64.5 cm deep can be planned for installation to the left and right of the wardrobe panels. The details make the difference elegant, aluminium-polished clothing hooks for the panels or hanging rails under shelves Thanks to the minimal depth of just 35 cm including shelves, the wardrobe panels are suitable for use even in narrow corridors. The heights of the shelves and dividers cannot be adjusted. CPL: pages 4 Outside wall for cover strip CPL: pages 6 12 Wardrobe element CPL: pages 4 Outside wall CPL: pages 82 Examples of pre-assembled wardrobe panels CPL: pages 6 12 Hinged door in front of wardrobe element CPL: pages 82 Wardrobe panel, already pre-assembled, e.g. order no. W 1444, W 1344, W 1744 Hinged door on the outside wall (W 9134, W 9135, W 9144, W 9145, W 9164, W 9165) for cover profile in front of wardrobe panels with top and bottom shelves and utensil boxes. The door is mounted to an outside wall if a wardrobe element is intended to be installed. It is mounted to a single wall (W 2933, W 2943, W 2963, W 2936, W 2946, W 2966) if a wardrobe element is not planned to be installed to the left and right. CPL: pages 84 Examples of a custom combination of wardrobe panels using individual elements. Wall LED-illuminated shelves have a wire along the back edge to connect them to the power supply that runs behind the wardrobe panels to the power source. Panel edge trim For freely suspended wardrobe panels, a panel edge trim piece is required to screen off the area behind the panel. For panels attached to the wall, no panel closing strip is required 44 collect collect 45

24 Custom designs Custom designs For special room situations, a wide variety of custom designs is available. The most common custom designs are listed on pages of the component price list. Many more custom designs are available on request. Width, height and depth reductions CPL: page 88 Width reduction: not possible for swivel doors minimum element width for sliding doors 58.5 cm minimum element width for gliding doors 78.5 cm CPL: page 88 Depth reduction for depth of 64.5 cm: min. 6.5 cm max cm Depth reduction for depth of 44.7 cm: min. 8.8 cm max cm Depth reduction for depth of 37.3 cm: min. 8.8 cm max cm Planning overview for installation under sloping ceilings To accommodate for sloping ceilings, we require the room height under the sloping part of the ceiling, the room depth of the sloping area and the total room height. collect wardrobes can be adapted to accommodate for sloping ceilings at the side or rear. It is not possible to have removable shelves or interior compartments in the sloping area. Sketch required CPL: page 89 Tapered point at the side only for wardrobe elements with and without hinged doors in lacquer and wood Room depth in sloping area Room depth in sloping area CPL: page 88 Height reduction Total room height Room height in sloping area Total room height Room height in sloping area Front view Side view Required dimensions Element projection 46 collect collect 47