4/18 E. Type list SLEEPING.

Transcription

1 4/18 E Type list SLEEPING

2 Range introduction Link to the assembly / user instruction movies MADERA SLEEPING Contents Page Range introduction, lists of versions 2-4 Wardrobes: Wardrobes, hinge-door wardrobes 5-7 Beds: Beds with wooden or upholstered headboard 8-9 Daybed, upholstered cushions, day covers 10 Ancillary units: Solitary console shelf, console shelf with leg, console wall shelf, top tray 11 Units: 2 Raster lowboards, 4 Raster sideboards, 8 Raster highboards, 9 Raster single units Raster wall units, 6 Raster wall unit, 2 Raster angled shelves 14 Lamps, remote control 15 Light. Harmonious. Comfortable. MADERA is made for the discerning and sophisticated consumer. Its charm lies in its particularly intricate form of design: the fine interplay of the joints and tangibly light units impart more spaciousness and light to the room and determine its atmosphere together with the sustainable wood, elegant lacquer surfaces and glass. Clever bed design for luxurious comfort and a slim look The intricate bed frame accommodates a base frame and a Boxspring box in such a way that they do not dominate the room visually. There are two headboards, one in wood and one with cosy upholstery, to go with the finely processed Italian frame, which is available on its own in the form of a day bed. Hovering, graceful, harmonious - the ancillary units Consoles and chests highlight the form of the bed in an harmonious and intricate design. The hovering insertable shelves provide storage space, and this is enhanced by the chests and consoles behind the non-symmetrical yet well-balanced fronts of wood and lacquer. Limitless freedom inside the wardrobe system The wardrobe upholds the aesthetic balance by way of its robust and extendable assembly principle: hinge-door units can be put together as required - in your own combination of plain doors in lacquer and accent units of wood. General information: Switch options for lamps Special-sized products, special articles Important notes: quality of walls / assembly instruction 20 2

3 Range introduction MADERA Lists of versions Wardrobes Model no. Wardrobe outside carcase and front Model no. Wardrobe doors with wooden front Quartz structured lacquer Anthracite structured lacquer European maple Oak natura Core walnut natura Wardrobe inside carcase in standard white lacquer Beds Model no. Headboard and bed surround Upholstered headboard and upholstered cushion European maple Oak natura Core walnut natura hülsta cover collection hülsta cover collection: see hülsta cover collection type list! Ancillary units, wall units, angled shelves Model no. Ancillary unit carcase and front Model no. 2-6 Raster wall units Model no. 2 Raster wall units with glass compartment European maple Oak natura Core walnut natura European maple Oak natura Core walnut natura Quartz structured lacquer Anthracite structured lacquer Ancillary units with lacquer front in: Quartz structured lacquer Anthracite structured lacquer Explanation of versions Versions of components in wood versions for: Bed, console shelves, console wall shelves, top tray, lowboards, components of sideboards, highboards, single units, wall units, wall panel, top panels Versions of components in lacquer versions for: Plinths of units, angled shelves, shelf of wall panel, components of sideboards, highboards, single units, wall units Light grey shading in the sketches = Components in wood version Wood Dark grey shading in the sketches = Components in lacquer version Lacquer

4 Range introduction Important notes Glass versions: Glass fronts and fitted glass shelves of clear glass. Fitted glass shelves of shelf units, glass shelves of wall panel and of angled shelves in lacquer version Standard interior fittings: Fitted wooden shelves are fitted behind doors at 2 Raster intervals and fitted glass shelves are fitted behind glass doors. Drawer frames in grey Combinations of floor and wall units: If floor and wall units are combined within an arrangement, there must not be any skirting boards in the room near the floor units, otherwise they must be removed. Max. load: Max. load of wooden and glass (fitted) shelves (up to 70.4 cm width) and drawers: 25 kg Max. load of wooden and glass (fitted) shelves (between 70.4 and cm width): 15 kg; from cm width: 10 kg Max. load of cover shelves: 5 kg per metre length for floor units. Please also note any maximum loads which may be stated in the type list for the individual units! Wall units: Wall units always incl. wall bracket hülsta-push-to-open: Drawers and flaps with hülsta-push-to-open device Labelling in type list drawings / assembly notes for wall units Labelling in type list drawings / assembly notes for wall units The majority of units have two wall mounting points (= number of base plates), if these are to be fitted as wall units. This is not explicitly mentioned in the type list. If a different number of wall mounting points (= base plates) is required, this is marked in the drawings in the type list with numbers in black boxes. Please be sure to note here the information and notes in the Wall composition chapter! 4 Information on the sketches Split drawer frames: Split drawer frames are used for drawers in front widths of 12.6 cm, cm, cm and cm (the partitions are shown by dotted lines in the sketches). The effective interior widths (= compartment widths) of the drawers are illustrated at the sketches of the units so that you can order suitable accessories for the drawers. 84,2 84,2 4

5 Wardrobes Light grey shading in the sketches = Components in wood version MADERA As an alternative to planning an individual unit from the complete range there is the possibility of choosing from specially suggested wardrobes. This eases planning. Incorporating accessories can enhance the wardrobes. These are charged extra. Wood Dark grey shading in the sketches = Components in lacquer version Lacquer 4-door hinge-door wardrobe 202 cm wide 202,0 100,0 100,0 A810 5-door hinge-door wardrobe (centre door with right hinge) 252 cm wide 252,0 100,0 50,0 100,0 A811 6-door hinge-door wardrobe 02 cm wide 02,0 100,0 100,0 102,0 A812 6-door hinge-door wardrobe 02 cm wide 02,0 100,0 100,0 102,0 A81 7-door hinge-door wardrobe (right door with right hinge) 52 cm wide 52,0 100,0 100,0 102,0 50,0 as illustr. v. versa A8141 A8142 5

6 Wardrobes Light grey shading in the sketches = Components in wood version Wood Dark grey shading in the sketches = Components in lacquer version Lacquer Hinge-door wardrobes Notes on planning hinge-door wardrobes according to the endless assembly principle Hinge-door wardrobes can be planned endlessly and combined with one another. Due to the various element widths one can create many total wardrobe widths. In this way the available floor space can be exploited to the full. For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer side-sections. One can only include one basic unit in each combination. When adding on extension units, the right-hand side-section of the basic unit is employed as the end side-section of the complete combination. In the case of single-door hinge-door units one can choose between left- and right-hand hinges. The graphics shown below give you an excerpt from our wardrobe assortment. Wardrobe examples Hinge-door wardrobes 02,0 100,0 100,0 102,0 Hinge-door wardrobes 02,0 100,0 100,0 102,0 Hinge-door wardrobes can be planned endlessly and combined with one another With lacquered doors incl. slat handle or with wooden doors incl. inlaid side grip Front mirrors and lamps against surcharge Unit outside widths: 52, 102 cm (basic units), 50, 100 cm (extension units) Unit inside widths: 48, 98 cm Wardrobe outside depth: 61.4 cm (lacquered doors) or 66.2 cm (wooden doors) Wardrobe inside depth: 56.0 cm Door opening angle: approx ,0 100,0 100,0 102,0 50,0 6

7 Wardrobes Hinge-door wardrobes Hinge-door wardrobes Height: cm (height with top LED lamp: 24.6 cm); height reductions (not possible for wooden doors) at intervals of 1.0 cm without surcharge Width: see table Depth: 61.4 cm (lacquered doors) or 66.2 cm (wooden doors); depth with top LED lamp: 74.2 cm Interior fittings per unit: 2 fitted shelves, 1 clothes rod; interior fittings in standard white lacquer. Sideward distance for the doors with wooden front must be 6.0 cm (per door) to open doors fully. MADERA For each project please remember to leave a 2.0 cm gap to the ceiling and at the side for assembly! Please also note the functional and highquality wardrobe interior fittings in the Wardrobe interior fittings type list as well as the special articles and possible specialsized products. Basic units with 2 outer side-sections (each 2 cm thick) Doors with lacquer front Doors with wooden front Extension units with 1 partition (2 cm thick) Doors with lacquer front Doors with wooden front For each wardrobe combination, the first element on the left is considered to be the basic unit, incorporating both outer side-sections. One can only include one basic unit in each combination. When adding on extension units, the right-hand side-section of the basic unit is employed as the end side-section of the complete combination. Lacquer Wood Lacquer Wood Single door unit, left or right, 52 cm wide Single door unit left or right, 50 cm wide L A2011 L A2012 R L A0011 L A0012 R Twin door unit, 102 cm wide Twin door unit, 100 cm wide A202 A221 L A222 R A002 A021 L A022 R Additional fittings for wardrobes / surcharges / lamps Lamps All hinge-door wardrobes are available with optional top LED lamps. One top LED lamp (12 V, 2.4 W) is fitted standard above each element 1 or 2 door. If required, a top LED lamp can be fitted centrally above each door. Please include a sketch in all cases. Switching is done by an external footswitch. A remote control unit is also available as an alternative, which is charged extra. The remote control unit incorporates one transmitter and one receiver which operate all the LED lamps. The footswitch is omitted when the remote control unit is employed. Surcharge for remote control unit with changing colours (transmitter + receiver) 2019 This luminaire contains built-in LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V Surcharge for top LED lamp LED lamp incl. footswitch 2.4 W 95 Surcharge for set of fittings for inner side of doors with wooden front consisting of: 1 linen rod, 2 fabric bags In follow-up orders, please be sure to state the required lacquer version for the set of fittings. Surcharge for mirror Each wardrobe door can be fitted with an optional mirror (vertical facet; exception: mirrors are not possible for doors with wooden front). Please state exactly in the order (from the left) which hinge-doors are to be fitted with a mirror. Surcharge for set of fittings 7964 L/R = Door hinge resp. accent front left/right Surcharge for mirror per hingedoor: 7

8 Beds with wooden headboard Please also note the mattresses in the Sleeping systems type list! Bed with wooden headboard and top bed frame of wood and hülstaflex comfort A base frame (fixed, not adjustable) Lower bed frame of metal, powder coated grey. Inside dims. Outside dims. Type no. As the top rim of the base frame is flush with the bed frame and the mattress edges rest on top of the bed frame, we recommend using a partner s mattress in order to avoid the mattress slipping on the base frame surface. For further information on this subject and on the hülstaflex comfort A base frame please see the SLEEPING SYSTEMS type list. 140x x x x200 14x219 16x219 18x219 20x x x x x210 14x229 16x229 18x229 20x Bed sizes: Headboard height: 91.0 cm Height of top rim of bed side: 5.5 cm Space to floor: approx. 24 cm 140x x x x220 14x29 16x29 18x29 20x Bed with wooden headboard and top bed frame of wood and Boxspring inside flex (fixed, not adjustable) Lower bed frame of metal, powder coated grey. Inside dims. Outside dims. Type no. As the top rim of the Boxspring is flush with the bed frame and the mattress edges rest on top of the bed frame, we recommend using a partner s mattress in order to avoid the mattress slipping on the Boxspring surface. For further information on this subject and on the Boxspring inside flex please see the Boxspring type list. 140x x x x200 14x222 16x222 18x222 20x x x x x210 14x22 16x22 18x22 20x Bed sizes: Headboard height: 91.0 cm Height of top rim of bed side: 5.5 cm Space to floor: approx. 24 cm 140x x x x220 14x242 16x242 18x242 20x

9 Beds with upholstered headboard Please also note the mattresses in the Sleeping systems type list! MADERA Bed with wooden headboard and top bed frame of wood and hülstaflex comfort A base frame (fixed, not adjustable) Lower bed frame of metal, powder coated grey. Inside dims. Outside dims. Type no. As the top rim of the base frame is flush with the bed frame and the mattress edges rest on top of the bed frame, we recommend using a partner s mattress in order to avoid the mattress slipping on the base frame surface. For further information on this subject and on the hülstaflex comfort A base frame please see the SLEEPING SYSTEMS type list. hülsta cover collection: see hülsta cover collection type list. Headboard with cover in fabric gr. I 140x x x x x x x x210 14x219 16x219 18x219 20x219 14x229 16x229 18x229 20x Bed sizes: Headboard height: 91.0 cm Height of top rim of bed side: 5.5 cm Space to floor: approx. 24 cm Headboard with cover in fabric gr. II Headboard with cover in fabric gr. III Genuine leather 140x x x x x x x x x x x x x x x x x x x x x x x x x x x x220 14x29 16x29 18x29 20x29 14x219 16x219 18x219 20x219 14x229 16x229 18x229 20x229 14x29 16x29 18x29 20x29 14x219 16x219 18x219 20x219 14x229 16x229 18x229 20x229 14x29 16x29 18x29 20x Bed with upholstered headboard and top bed frame of wood and Boxspring inside flex (fixed, not adjustable) Lower bed frame of metal, powder coated grey. Inside dims. Outside dims. Type no. As the top rim of the Boxspring is flush with the bed frame and the mattress edges rest on top of the bed frame, we recommend using a partner s mattress in order to avoid the mattress slipping on the Boxspring surface. For further information on this subject and on the Boxspring inside flex please see the Boxspring type list. hülsta cover collection: see hülsta cover collection type list. Headboard with cover in fabric gr. I 140x x x x x x x x210 14x222 16x222 18x222 20x222 14x22 16x22 18x22 20x x x x x220 14x242 16x242 18x242 20x Headboard with cover in fabric gr. II 140x x x x x x x x x x x x220 14x222 16x222 18x222 20x222 14x22 16x22 18x22 20x22 14x242 16x242 18x242 20x Bed sizes: Headboard height: 91.0 cm Height of top rim of bed side: 5.5 cm Space to floor: approx. 24 cm Headboard with cover in fabric gr. III Genuine leather 140x x x x x x x x x x x x220 14x222 16x222 18x222 20x222 14x22 16x22 18x22 20x22 14x242 16x242 18x242 20x

10 Day bed Day bed approx. 55 cm high; 200 cm long; 100 cm wide Type no. incl. hülstaflex comfort A base frame (fixed, not adjustable) and TopPoint 500 mattress with furniture fabric cover in firmness class 2 (medium) For information on base frames and mattresses see Sleeping Systems type list. hülsta cover collection: see hülsta cover collection type list, please state the required version clearly in the order! with cover in fabric gr. I 825 with cover in fabric gr. II 825 Bed sizes: Height of top rim of bed side: 5.5 cm Space to floor: approx. 24 cm Genuine leather with cover in fabric gr. III 825 Upholstered cushion Upholstered cushion with furniture fabric cover Ø approx. 19 cm hülsta cover collection: see hülsta cover collection type list, please state the required version clearly in the order! with cover in fabric gr. I for daybed / bed width Type no with cover in fabric gr. II Genuine leather with cover in fabric gr. III Day covers Day covers Day covers available in fabrics from the hülsta cover collection hülsta cover collection: see hülsta cover collection type list, please state the required version clearly in the order! Dimensions 140 x x x x 200 Type no I Fabric group II III 140 x x x x x x x x

11 Accessories for beds MADERA Console shelf solitary Console shelf - solitary.8 cm thick; 48.0 cm deep Height of top rim of console shelf: 5.5 cm The solitary console shelf is fitted firmly to the lower bed frame of metal. It can be fitted left and/or right. Please state clearly in the order! 45.0 cm wide L R L Max. load: 5 kg Console shelf with leg Console shelf - with leg 5.5 cm high; 48.0 cm deep The console shelf with leg is fitted firmly to the lower bed frame of metal. It can be fitted left and/or right. Please state clearly in the order! L 60.0 cm wide L R 75.0 cm wide cm wide cm wide L R L R L R Max. load: 10 kg Console wall shelf Console wall shelf.8 cm thick; 20.0 cm deep The console wall shelf is fitted behind the bed/console shelves. The price is calculated per 10 cm length or part thereof. Price per 10 cm length: 5010 Max. load: 10 kg Top tray Top tray.8 cm thick; 47.0 cm deep Top tray incl. movable shelf for placing on top of console shelf cm wide 545 L/R = Console shelf fitted at left/right side of bed 11

12 2 Raster lowboards 2 Raster lowboards 5.2 cm high (9.2 cm high incl. 4.0 cm high plinth slat), 42.0 cm deep Incl. centre cable aperture behind flap with flap hinge at bottom in rear wall of each compartment. There is no cable aperture behind flaps with flap hinge at top. Flap hinge at bottom Assembly notes for wall units: Please be sure to note here the information and notes in the Wall composition chapter! cm wide 1 flap 6 Light grey shading in the sketches = Components in wood version 84,2 84,2 9,2 9, cm wide 1 flap cm wide Wood Dark grey shading in the sketches = Components in lacquer version 1 flap Lacquer When used as wall units: Max. load: 40 kg Flap hinge at top Wall bracket If units are to be included as wall units, a wall bracket must be ordered. In this case the plinth slat is omitted Raster sideboards 4 Raster sideboards 70.6 cm high (74.6 cm high incl. 4.0 cm high plinth slat), 48.0 cm deep 101,8 57,8 84,2 49,0 57,8 57, cm wide cm wide 1 door; drawers 1 door; 2 drawers; 1 flap (bottom right) 1 door; drawers 1 door; 2 drawers; 1 flap (bottom right) When used as wall units: Max. load: 0 kg Flap hinge at bottom as illustr. v. versa Wall bracket If units are to be included as wall units, a wall bracket must be ordered. In this case the plinth slat is omitted Raster highboards 8 Raster highboards cm high (12.2 cm high incl. 4.0 cm high plinth slat), 42.0 cm deep 12 Flap hinge at bottom 101, cm wide 1 flap; 4 drawers 4 drawers drawers cm wide 1 flap; drawers

13 Separating board If two lowboards are planned next to one another, a separating board (black, looks like a shadow) must be ordered. for 42.0 cm unit depth 242 MADERA , cm wide cm wide cm wide flaps flaps flaps ,8 101,8 101,8 57,8 57,8 75,4 75,4 84,2 84, cm wide cm wide cm wide 1 door; 2 drawers 1 door; 1 drawer; 1 flap (bottom right) 1 door; 2 drawers 1 door; 1 drawer; 1 flap (bottom right) 4 drawers drawers; 1 flap (bottom right) as illustr. v. versa Raster single units 9 Raster single units cm high (168.2 cm high incl. 4.0 cm high plinth slat), 42.0 cm deep as illustr. v. versa 1, cm wide 1 door; 1 drawer L 49, cm wide 2 doors; 2 drawers L/R = Door hinge left/right 1

14 2 Raster wall units Assembly notes for wall units: Please be sure to note here the information and notes in the Wall composition chapter! 6 Light grey shading in the sketches = Components in wood version Wood Dark grey shading in the sketches = Components in lacquer version Lacquer 2 Raster wall units 5.2 cm high; 42.0 cm deep 84,2 57,8 57, cm wide cm wide cm wide 1 flap with glass panel 1 flap with glass panel 1 flap with glass panel Max. load: 25 kg Wall units or wall assembly: See here the information on page 20. Flap hinge at bottom as illustr. v. versa Raster wall unit 6 Raster wall unit 11.4 cm high; 42.0 cm deep 88.4 cm wide Max. load: 25 kg Wall units or wall assembly: See here the information on page 20. as illustr. v. versa 1 door; 1 door with glass panel; 1 drawer Raster angled shelves 2 Raster angled shelves 5.5 cm high; 7.0 cm deep Glass shelf of angled shelves in lacquer version 7.0 cm deep 70.4 cm wide cm wide cm wide cm wide cm wide cm wide cm wide cm wide Max. load:.5 kg Max. load: 5 kg Max. load: 7 kg Max. load: 9 kg Max. load: 10 kg Max. load: 11 kg Max. load: 12.5 kg Max. load: 14 kg

15 Accessories Lamps This luminaire contains built-in LED lamps of the energy classes A++ to A. The lamps cannot be changed in the luminaire. 12 V LED light strip for fitting under wall units and angled shelves for 70.4 cm unit width for 88.4 cm unit width for cm unit width MADERA LED lamps incl. footswitch. A remote control unit is possible for operation (against a surcharge; see below). for cm unit width for cm unit width for cm unit width for cm unit width for cm unit width for cm unit width 6. W 8.4 W 9.6 W 1.0 W 16.4 W 18. W 20.2 W 2.6 W 26.9 W Integrated LED spotlamp Ø 7.1 cm; for fitting in units 2,9 W 7941 Remote control unit with changing colours The lamps are normally operated by an external footswitch. The colour temperature of the LED lamps is cold white if a footswitch is used. A 4-channel remote control unit is also available as an alternative, which is charged extra. Several lamps can be operated with each of the 4 channels. All 4 channels can be dimmed separately at the push of a button. The colour temperature of all 4 channels can be set to any level from cold white (approx kelvin = the basic setting of the LED lamps) to warm white (approx kelvin). If warm white is required, a remote control unit must be ordered. It is also possible to switch all channels on and off simultaneously with the all on or all off buttons. Up to 4 transmitters can operate as many receivers as required. The remote control unit consists of one transmitter and one receiver. If several receivers are required because of the arrangement of the units, these and the corresponding cables are provided ex-works (no surcharge). The footswitch is omitted when the remote control unit is used

16 Switch options for lamps: Remote control unit with changing colours Remote control unit with changing colours The lamps are normally operated by an external footswitch. The colour temperature of the LED lamps is cold white if a footswitch is used. A 4-channel remote control unit is also available as an alternative, which is charged extra. Several lamps can be operated with each of the 4 channels. All 4 channels can be dimmed separately at the push of a button. The colour temperature of all 4 channels can be set to any level from cold white (approx kelvin = the basic setting of the LED lamps) to warm white (approx kelvin). If warm white is required, a remote control unit must be ordered. It is also possible to switch all channels on and off simultaneously with the all on or all off buttons. Up to 4 transmitters can operate as many receivers as required. The remote control unit consists of one transmitter and one receiver. If several receivers are required because of the arrangement of the units, these and the corresponding cables are provided ex-works (no surcharge). The footswitch is omitted when the remote control unit is used. The following points must be noted with the radio remote control unit: - The receiver must be positioned behind a rear wall or under plinth shelves (at least 20 mm space required under plinth shelves). - The total wattage power of all lamps included per power supply unit/receiver must not exceed 0 W. - 4 channels = 4 light groups - 1 light group = x lights - All lamps within a light group can be dimmed to the same brightness. - The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps. - The remote control unit is not suitable for equipment operating on 110 V. Please be sure to note the operating and programming instructions! 4-channel remote control unit with changing colours Light colour warmer Light colour colder Channel 1 to 4 (with dimmer function) All off All on 4-channel remote control unit with changing colours Type

17 Switch options for lamps: Remote control unit with changing colours MADERA Examples of use (schematic diagrams) Example 1 Lights inside a unit Channel 1 operates (and dims) all the lights in light group 1, i.e. the LED spotlamp in the left cabinet Channel 2 operates (and dims) all the lights in light group 2, i.e. the LED spotlamps in the open compartment 1 Channel operates (and dims) all the lights in light group, i.e. the LED spotlamp in the right cabinet 2 Notes: The total wattage power of all lamps included per power supply unit/ receiver must not exceed 0 W. The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps. Channel 2 Channel Channel 1 Example 2 Lights in units set apart Channel 1 operates (and dims) all the lights in light group 1, i.e. the LED spotlamp and the LED light panels in the left cabinet Channel 2 operates (and dims) all the lights in light group 2, i.e. the LED spotlamps and the LED light panels in the centre cabinet 1 2 Channel operates (and dims) all the lights in light group, i.e. the LED spotlamp and the LED light panels in the right cabinet Notes: The total wattage power of all lamps included per power supply unit/ receiver must not exceed 0 W. The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps. 1 Channel 2 Channel Channel 1 Example Lights in units set apart Channel 1 operates (and dims) all the lights in light group 1, i.e. the LED spotlamps in the left, centre and right cabinet Channel 2 operates (and dims) all the lights in light group 2, i.e. the top LED light panels in the left, centre and right cabinet Channel operates (and dims) all the lights in light group, i.e. the bottom LED light panels in the left, centre and right cabinet Notes: The total wattage power of all lamps included per power supply unit/ receiver must not exceed 0 W. The same light colour can be set for all lamps in all the light groups. This light colour is then valid for all the lamps Channel Channel 2 Channel 1 17

18 Special-sized products Special heights, special widths, special depths Special heights Not possible on accent fronts MADERA Hinge-, folding- and sliding-door wardrobes can be reduced in height at intervals of 1.0 cm. Below eye-level we recommend fitting a top cover shelf made of panelling material. Please state in order! Special heights in stepped versions (not possible on sliding-door wardrobes) at a surcharge. Surcharge per step: 0000 Special widths Only applies to hinge- and folding-door wardrobes; not possible on accent fronts MADERA Single-door units, left or right hinges, can be reduced down to 25 cm width (apart from profiled doors). Twin-door units can be reduced at both sides down to 50 cm total width (apart from profiled doors). Interior fittings such as drawers and other fittings cannot be reduced in width. For notes on width reductions on MULTI-FORMA II sliding-door wardrobes please see special-sized products for MULTI-FORMA II. Special depths Depth reductions are made on side sections, plinths, cornices and shelves. Interior fittings such as drawers and other fittings cannot be reduced in depth. A max. reduction of 0.0 cm is possible on hinge- and folding-door wardrobes. A max. reduction of 9.0 cm is possible on profiled hinge-doors. For sliding-door wardrobes, a max. reduction of 0.0 cm is possible (max. 18 cm in combination with the electrical opening system for MULTI-FORMA II). Please note that for technical production reasons not every special depth can be achieved: 2.5 cm standard reduction between 0 and 2.5 cm 5.0 cm standard reduction between 4.5 and 5.0 cm 27.5 cm standard reduction between 27.0 and 27.5 cm Notes on calculating sizes of sloping units Side sloping Sloping is only possible on single-door units. The door hinge (left or right) is positioned on the taller outer side of the unit. Not possible on accent fronts MADERA. Measurements required: H 1 = Room height H 2 = Height of slope (If a space is required between the wall and the wardrobe/unit, please state the exact distance.) B 1 = Width of slope B 2 = Width of slope G = Total width S = Wardrobe width Please note! If the slope cuts across the position of a handle, the handle of this door only is positioned further down in production. As floors, ceilings and walls are never exactly straight, the exact room size must be measured using a spirit level. If a cornice is fitted, please state if this is to be continued in the sloping section. max. 46 cm Rear sloping 18 Rear sloping is possible on all wardrobe units. Measurements required: H 1 = Room height H 2 = Height of slope (If a space is required between the wall and the wardrobe/unit, please state the exact distance.) T 1 = Depth of slope T 2 = Depth of slope

19 Special-sized products MADERA MADERA Wardrobes Special heights: Hinge-door Hinge-door - Lacquer - Mirror 000 without surcharge 0001 without surcharge Special heights are not possible for wooden doors Special widths: for single-door unit - Lacquer for single-door unit - Mirror for twin-door unit - Lacquer for twin-door unit - Mirror Special widths are not possible for wooden doors When ordering extra fitted shelves and clothes rods Size reduction surcharge per fitted shelf Size reduction surcharge per clothes rod Special depths: Surcharge per unit When ordering extra fitted shelves Size reduction surcharge per fitted shelf Side sloping: Surcharge per unit Rear sloping: Surcharge per unit More special products are possible. Please get in touch with your customer advisor. Special articles Wardrobe doors are also available as separate units and are charged as follows: For 1 hinge-door/folding-door wing: 50% of the concerning 1-door hinge-door extension unit 165 hinges Wardrobe doors can also be fitted with 165 hinges against a surcharge (only possible on plain, straight hinge-doors; impossible on fabric-covered doors and accent fronts MADERA). Please mark the doors clearly in the order! For 1 sliding-door including mechanism: 5% of the twin-door sliding-door wardrobe For door superstructures, type 100 (max. 98 cm wide, only for assembly between wardrobes): 100% of twin-door hinge-door extension unit Surcharge for 165 hinges per hinge-door: 180 Panels for side and top covering of fitted wardrobes (not possible for highgloss versions; support construction and fitting materials must be acquired on site). For veneered/lacquered versions (max cm long, max cm wide, 2.0 cm thick) Basis charge per order: price per m² - lacquer price per m² - veneer 990 Veneer match with fronts can not be guaranteed. Individual special-sized products If the special-sized product that you require is so unusual that it cannot be illustrated with the many special sized products that we already provide and charge for, then we will quote you the price using a HK unit type factor. In your order please state for us the relevant enquiry number and the HK unit type factor stated. HK Special colours; Note on Blue Angel / Emissions label of DGM Edge veneer for veneered/lacquered versions per m. length 9902 Special colours All the hülsta lacquer colours are possible for nearly all the hülsta ranges. Availability and prices on request. Note on Blue Angel (RAL-UZ 8) and Emissions label of DGM (Class A) It is possible that the requirements of the Blue Angel and the DGM Emissions Label cannot be met by some of the lacquer colours in price groups II and III (see here the different lacquer versions in the NURIA range), depending on the colour mix (surface ratio of these colours in the corresponding order). However, the legal requirements are definitely met in all cases! 19

20 Important notes Wall composition / assembly instruction Important notes: The composition of walls must be ascertained before concluding a contract and be checked by a qualified fitter before assembly takes place. Assembly may only be carried out by a qualified fitter under careful observation of the assembly instructions. The plastic Rawl plugs with the type name SX 8 x 65 from the Fischer Company supplied by hülsta as a standard set are only suitable for concrete C12/15, if the wall composition and compression strength corresponds to the table below. Under no circumstances must a unit be assembled on light masonry. Furthermore, we provide a mounting set with assembly mortar from the Fischer Company for the types of walls listed below (see assembly mortar set below). Again, assembly must be carried out by a qualified fitter under careful observation of the wall composition and assembly instruction. The compression strength levels stated below must be met under all circumstances. Materials table with a description of which sets are to be used with the following types of walls: Standard set (SX 8 x 65) Assembly mortar set only suitable for the materials stated below! Concrete C12/15 Compression strength 15 N/mm² Building bricks Mz 12 Compression strength 12 N/mm² Solid blocks of light concrete V2 Compression strength 2 N/mm² Limestone blocks KS 12 Compression strength 12 N/mm² Perforated blocks of light concrete Hbl 2 Compression strength 2 N/mm² Perforated sand lime bricks KSL12 Compression strength 12 N/mm² Aerated concrete PP2 Compression strength 2 N/mm² Vertically perforated bricks HLz 12 Compression strength 12 N/mm² Bulk density 1.0 kg/dm³ A different and more suitable type of mounting must be chosen by a qualified fitter in all other cases. hülsta cannot accept any responsibility for the choice of any other types of mounting! Please note that if the units are not mounted properly on the wall, there is a risk of the units falling down or tipping over especially when alternative mounting materials acquired on site have been used. Generally speaking, you as a dealer/qualified fitter are responsible for the correct wall mounting of the units. Mounting sets Labelling in type list drawings / assembly notes for wall units The majority of units have two wall mounting points (= number of support boards), if these are to be fitted as wall units. This is not explicitly mentioned in the type list. If a different number of wall mounting points (= support boards) is required, this is marked in the drawings in the type list with numbers in black boxes. Every support board requires four mounting screws. 4 = support boards = 4 support boards, etc. One assembly mortar set is sufficient for up to a maximum of support boards or 4 wall side-panels. Important note: Depending on the composition of the wall (see wall types illustrated above), assembly must be carried out using the special assembly mortar set and a standard trade mastic tool which are the basic essentials for safe and clean workmanship. Standard set The standard set consists of 4 plastic Rawl plugs (SX 8 x 65) and 4 mounting screws and is sufficient for 1 support board. The standard sets are included in the packet of fittings to match the number of support boards. 20 Assembly mortar set for up to a maximum of support boards consisting of: 9x injection retaining sleeve 9x screw-in sleeve 1x injection cartridge 2x static mixer 1x assembly instructions Please use the mounting screws from the standard set (supplied free of charge). Example of order: Add up number of support boards for all existing unit types Divide the sum by Round up the result to a full number = Number of assembly mortar sets required M2

21 Your Hotline to hülsta Do you have any questions or require any alterations to your order confirmation? Do you have any questions on our products or your current order? Do you have any complaints about supplied goods or required replacement parts? Contact Telephone: +49 (0) 256 / orders@huelsta.com Do you have any questions, suggestions or wishes for the hülsta Marketing team or the hülsta product seminars? Contact Telephone: +49 (0) 256 / marketing@huelsta.com hülsta Planning Service Lots to do? A customer wants his project finished and you haven t got enough time? Or the project is so complex that it will take too much time? This is exactly the kind of situation we created the hülsta Planning Service for. hülsta s employees create the required project for you at short notice. Based on your information, we implement the project perfectly with all views and a complete order list ready for immediate forwarding to the customer. The hülsta check list (available at makes it all really easy for you. You won t forget anything with this list and the customer receives a project he will be thrilled about as quickly as possible. hülsta Planning Service Tel.: +49 (0) 256 / 86-0 Fax: +49 (0) 256 / Mail: Planungsservice-Handel@huelsta.de Workdays from 8.00 a.m. until 6.00 p.m. Special wishes? Come to us! Maximum individuality! Maximal flexibility! hülsta makes most of your special wishes possible. And if you do have a wish which is not quite so easy to implement, just give us a call or send us a mail or a fax. We have our own hülsta Special Wishes Team who are there to help you realise just these customer requests. These colleagues are professionals when it comes to special products. They plan and calculate the products possible for you and even develop an alternative suggestion if the idea should turn out to be technically impossible. Here is an overview of the hülsta range of special wishes: A lot of special products can be ordered simply via the type list Special-sized products are planned simply and professionally Competent colleagues advise you by phone, by fax and by mail You will be sent alternative suggestions if the idea is technically impossible Many special-sized products are available without a surcharge Specially qualified carpenters and technicians implement your plans perfectly hülsta Special Wishes Team Tel.: +49 (0) 256 / 86-0 Fax: +49 (0) 256 / Mail: Sonderwunsch@huelsta.com We are open Saturdays for you, too! Our Saturday hotline is available all day from a.m. until 6.00 p.m. Telephone: +49 (0) 256 / On working days the hülsta Sales Department is available all day from 8.00 a.m. until 6.00 p.m. hülsta MADERA Schlafen Stand: Design and concept legally protected, subject to error and alterations to construction, colour and materials by way of technological progress. hülsta-werke Karl-Hüls-Straße 1 D-4870 Stadtlohn Tel. +49 (0) 256 / 86-0 Fax +49 (0) 256 /