Vacuum Presses Series
|
|
- Nickolas Thornton
- 5 years ago
- Views:
Transcription
1 Vacuum Presses Series SVP1718 SVP SVP1718FL Operator manual Manufactured by:
2 1
3 Introduction The Vacuum Presses are compact, robust and sturdy machine designed for fast, complete vacuum forming work. It will deliver efficient, dependable service when used correctly and with care. As with any piece of specialized equipment, for best performance the manufacturer s instructions must be followed. THESE INSTRUCTIONS SHOULD BE READ AND UNDERSTOOD BY ALL USERS PRIOR TO INSTALLATION OR USE OF THE VACUUM PRESS. GENERAL MACHINERY SAFETY WARNINGS 1. MISUSE of this machine can cause injury. 2. READ, UNDERSTAND AND FOLLOW all instructions shipped with your machine. 3. ALWAYS WEAR SAFETY GLASSES when operating machinery. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses 4. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewellery which may get caught in moving parts. Nonslip footwear is recommended. Wear protective hair covering to contain long hair. 5. TO MAINTAIN PROPER FOOTING, never operate machinery when floor is damp or wet. Wear soft soled footwear on a clean dry floor for safest operation. 6. KEEP CHILDREN AWAY. All visitors should be kept safe distance from work area. 7. MAKE WORKSHOP KID PROOF with padlocks, master switches, or by removing starter keys. 8. DON'T FORCE TOOL. It will do the job better and safer at the rate for which it was designed. 9. USE ONLY RECOMMENDED ACCESSORIES. Properly install and maintain accessories. 11. DON'T OVERREACH. Keep proper footing and balance at all times. Be alert when using machinery and keep hands clear of moving parts. 12. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for best and safest performance. Follow instructions for lubricating and changing accessories. 13. DISCONNECT POWER SOURCE before performing any service to the machine. Be sure the machine is in the OFF position before reconnecting any power when changing accessories. 14. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in OFF position before plugging in. 15. USE RECOMMENDED ACCESSORIES. Consult the owner's manual for recommended accessories. The use of improper accessories may cause risk of injury to persons. 16. ALWAYS PROPERLY SECURE machinery to floor or bench as instructed. 17. MAINTAIN A CLEAN, dry, well lit, and clutter free work area. 18. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF. Don't leave tool until it comes to a complete stop. 19. NEVER MODIFY THE MACHINE. Modifications may cause safety hazards and will void the warranty. 10. DO NOT USE EXTENSION CORD. RISK OF INJURY DISCONNECT TOOLS BEFORE SERVICING AND LOCK THE SWITCHES. EYE PROTECTION SHOULD ALWAYS BE WORN BY THE OPERATOR AND OTHERS IN THE WORK AREA WHEN THE CARVER IS IN USE. EYE PROTECTION IS REQUIRED FOR PROTECTION FROM FLYING DEBRIS AND DUST, WHICH COULD CAUSE EYE INJURY. 2
4 GENERAL SPECIFICATIONS The Vacuum press comes equipped with a the new quick-release replacement bladder system, LandisVacuum Presses have the quickest system on the market. Bladders are changed in just minutes instead of an hour or more. No tools are required. MODEL SPECIFICATIONS Description Single Dual Dual Flat Model SVP SVP1718 SVP1718FL Width INSIDE OUTSIDE 10" (254 mm) 16½" (419,1 mm) 17 inches (431,8 mm) 23½ inches (596,9 mm) 17 inches (431,8 mm) 23½ inches (596,9 mm) Height Depth INSIDE OUTSIDE INSIDE OUTSIDE Net Weight 3" (76,2 mm) 7" (177,8 mm) 17" (431,8 mm) 25" (635 mm) 32 lbs (14.54 kg) 3" (76,2 mm) 7" (177,8 mm) 18" (457,2 mm) 26 in. (660,4 mm) 42 lbs (27 kg) inches (457,2 mm) 26 in. (660,4 mm) 59 lbs (35 kg) Note: Specifications subject to change without notice. 2
5 START-UP EYE PROTECTION SHOULD ALWAYS BE WORN BY THE OPERATOR AND OTHERS IN THE WORK AREA WHEN SETTING UP THE MACHINE. EYE PROTECTION IS REQUIRED FOR PROTECTION FROM FLYING DEBRIS AND DUST, WHICH COULD CAUSE EYE INJURY. Before shipment, your Vacuum Press was checked at the factory for proper adjustment and operation. However, due to the possibility of jarring or damage during handling and shipping, it is necessary to check that the machine is in proper working order before use. The Vacuum Press should be located on a flat, firm surface, in an area free of obstructions that could interfere with the safe operation of the equipment. ALL ELECTRICAL WORK MUST BE PERFORMED BY A QUALIFIED ELECTRICIAN AND MUST CONFORM TO ALL STATE AND LOCAL ORDINANCES. DO NOT, UNDER ANY CIRCUMSTANCE, TAMPER WITH, MODIFY, OR ADAPT THE ELECTRICAL PLUG AND CORD PROVIDED WITH THIS MACHINE. UNCRATING & SET-UP INSTRUCTIONS 1. The Vacuum Presses are shipped fully assembled in a cardboard crate. If a sharp tool is used care should be taken not to damage the vacuum press. 2. Unpack the Vacuum press. 3. Installation should be in a well lit, uncluttered location with convenient access to proper electrical receptacles. 4. The Vacuum Press should be grounded in accordance with local codes and ordinances. A qualified electrician should be consulted if electrical work is required. Grounding the vacuum press will prevent electrical shock. The vacuum press should never be used with extension cords or ungrounded receptacles. 5. The Vacuum Press comes with a standard US plug or custom plug as specified at the time of purchase. A plug should never be forced into a receptacle. If the plug is not compatible with your receptacle please consult a qualified electrician or contact Landis International for assistance. 6. Reach the hose under the Vac pan and install it at the end of your Vacuum pump. 3
6 HOW TO CHANGE THE BLADDER ON YOUR VACCUUM PRESS 1. Take the cover off the vacuum press by sliding it to the right. 2. Install the cover on a flat surface. 3. Unscrew the 4 black knobs just enough so you can turn the J-bolts to get out the inner frame. There is no need to totally unscrew the knobs. 4. Get rid of the broken bladder. 5. Install a new bladder on the inner frame. 6. Put this frame inside the cover. 7. Turn the 4 J-bolts back in place again and tight the black knobs. 8. Reassemble the cover on the Vacuum press by sliding the pins in the hinges. 9. You are now ready to work. EYE PROTECTION SHOULD ALWAYS BE WORN BY THE OPERATOR AND OTHERS IN THE WORK AREA WHEN USING THE ACCESSORIES WITH THE MOLEVSP2. EYE PROTECTION IS REQUIRED FOR PROTECTION FROM FLYING DEBRIS AND DUST, WHICH COULD CAUSE EYE INJURY. 4
7 MAINTENANCE A properly maintained machine will give you years of satisfactory service, whereas an abused machine will not. We strongly recommend that you observe the following procedures for your own benefit and safety. ALWAYS DISCONNECT THE MACHINE'S POWER SOURCE BEFORE PERFORMING ANY MAINTENANCE. NEVER DISASSEMBLE THE MACHINE OR EXPOSE WIRING WITHOUT DISCONNECTING THE ELECTRICAL POWER. DAILY AND WEEKLY MAINTENANCE 1. Clean your Vacuum press daily. 2. All required lubrication of internal parts is performed at the factory and no additional lubrication is required. 3. As required, the machines should be cleaned of dust and debris using compressed air or a soft dry cloth. 4. Periodic cleaning of external surfaces is suggested if build-up of dust and debris occurs. After cleaning, lubricate unpainted external surfaces with a light coating of oil for rust prevention. 5
8 ACCESSORIES VACUUM PRESS ACCESSORIES GAST ROTARY VANE PUMP QUICK VAC STACKABLE TANK SKU : 87R642101RN470 Save space and speed-up your vacuum forming process Quick Vac Stackable Tank shown with Dual Flat Vacuum Press and Gast Vacuum Pump 6
9 PARTS Single Press (SVP) VACUUM PRESS FRONT HANDLE CROSS HANDLE FRAME J BOLT BLADDER COVER FRAME PAN HOSE BALL VALVE QUICK-RELEASE BLADDER FRAME 7
10 PARTS Dual Press (SVP1718) VACUUM PRESS FRONT HANDLE CROSS HANDLE FRAME J BOLT BLADDER COVER FRAME PAN BALL VALVE QUICK-RELEASE BLADDER FRAME 8
11 PARTS Dual Press (SVP) VACUUM PRESS FRONT HANDLE CROSS HANDLE FRAME J BOLT BLADDER COVER FRAME FLAT PAN BALL VALVE QUICK-RELEASE BLADDER FRAME 9
12 PARTS LIST PART DESCRIPTION REF # LATEXSVP1017 GUM RUBBER BLADDER SVP LATEXSVP1718 GUM RUBBER BLADDER SVP1718/SVP1718FL H35091 FRONT HANDLE SVP/SVP1718/SVP1718FL BHA BUTTON HEAD ALLEN 10-32¼" SVP/SVP1718/SVP1718FL BHA BUTTON HEAD ALLEN 10-32¼" SVP/SVP1718/SVP1718FL CROSS HANDLE 3/8-16 SVP/SVP1718/SVP1718FL JBOLT38 J BOLT 3/8-16, 3¼" SVP/SVP1718/SVP1718FL NIPPLE ¼"-¼" NPT 2½"L SVP SHORT NIPPLE SVP1718/SVP1718FL D115B ELBOW 90 MALE - FEMALE SVP/SVP1718/SVP1718FL FW916 FLAT WASHER 9/16" SVP/SVP1718/SVP1718FL SVPWASHER RUBBER WASHER 1½" X ½" SVP/SVP1718/SVP1718FL VB14 BALL VALVE ¼" NPT SVP/SVP1718/SVP1718FL D1254B MALE HOSE END ¼" SVP D1258B MALE HOSE END ½" SVP1718/SVP1718FL 101B T ¼" SVP/SVP1718/SVP1718FL HS10 HOSE COLLAR ¾" SVP1718/SVP1718FL 10
13 PARTS VIEW 11
14 PARTS VIEW 12
15 PARTS VIEW 13
16 WARRANTY INFORMATION VACUUM PRESS EQUIPMENT WARRANTY P2 EQUIPMENT WARRANTY Vacuum Press Equipment and Equipment accessories are warranted for manufacturing defects for 12 months from the date of shipment from the Landis International warehouse or from an authorized distributor. Items will be replaced or repaired at Landis International discretion at no charge to the customer (See Vacuum Press Warranty Repair/Replacement Procedure and Agreement). The warranty will be void if the item has been modified, abused, or used outside of Landis International recommendations. 14
hp Dust Collector With Vacuum Attachment
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
Landis Fume Buster 3, 4 & 5 Foot
Landis Fume Buster 3, 4 & 5 Foot Operator Manual Manufactured by V 05/2018 INTRODUCTION The Landis Fume Buster is a durable machine designed to remove toxic airborn chemicals and odors from your work environment.
GRIND PRO DUAL OR DISC SANDER. Operator Manual
GRIND PRO DUAL OR DISC SANDER Operator Manual 2 GRIND PRO DUAL OR DISC ORTHO-SANDER INTRODUCTION The Grind Pro Dual or Disc Sander is a compact, durable machine designed for fast, complete finishing work.
7165 Dust Collector Owner s Manual
7165 Dust Collector Owner s Manual Oliver Machinery M-7165 12/2016 Seattle, WA Copyright 2003-2017 info@olivermachinery.net www.olivermachinery.net CONTENTS IMPORTANT SAFETY RULES----------------------------------------------------------------
5HP CYCLONE DUST COLLECTOR MANUAL
5HP CYCLONE DUST COLLECTOR MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo are the registered trademarks
IMPORTANT SAFETY RULES
1 IMPORTANT SAFETY RULES Wood working can be dangerous if safe and proper operating procedures are not followed. As with all machinery, there are certain hazards involved with the operation of the product.
Operating Manual RS6 Pro
Operating Manual RS6 Pro 510 HODGE, ST-LAURENT, QC H4N 2A4 TOLL FREE: 1-877-262-5801 ~ TEL.: 514-382-1140 ~ FAX: 514-382-8249 ~ www.dupliskate.com SET-UP REMOVE THE RS6 FROM THE SHIPPING SKIDS. REMOVE
3HP MOBILE CYCLONE DUST COLLECTOR MANUAL FILTER CLEANING MANUAL
3HP MOBILE CYCLONE DUST COLLECTOR MANUAL FILTER CLEANING MANUAL LAGUNA TOOLS 2072 Alton Parkway Irvine, California 92606 Ph: 800.234.1976 www.lagunatools.com 2018, Laguna Tools, Inc. LAGUNA and the LAGUNA
2HP MOBILE CYCLONE DUST COLLECTOR MANUAL
HP MOBILE CYCLONE DUST COLLECTOR MANUAL MANUAL FILTER CLEANING LAGUNA TOOLS 07 Alton Parkway Irvine, California 9606 Ph: 800.3.976 www.lagunatools.com 08, Laguna Tools, Inc. LAGUNA and the LAGUNA Logo
7140 Dust Collector Owner s Manual
7140 Dust Collector Owner s Manual Oliver Machinery M-7140 09/2011 Seattle, WA Copyright 2003 info@olivermachinery.net www.olivermachinery.net CONTENTS ADDITIONAL SAFETY RULES FOR DUST COLLECTOR... 3 SAFETY
Thank You & Congratulations On Your Purchase of: ARBE Model # SS-206 Table Top Dust Collector
Thank You & Congratulations On Your Purchase of: ARBE Model # SS-206 Table Top Dust Collector "The Most Powerful Dust Collector In Its Class... Guaranteed!" IMPORTANT INSTRUCTIONS DO NOT DISCARD I Thank
Owner s Manual & Safety Instructions
Owner s Manual & Safety Instructions Save Save This This Manual Keep Keep this this manual manual for for the the safety safety warnings warnings and and precautions, assembly, assembly, operating, inspection,
3-1/2 GALLON PARTS WASHER OPERATING INSTRUCTION AND PARTS MANUAL. Model # 4KTV9
3-1/2 GALLON PARTS WASHER OPERATING INSTRUCTION AND PARTS MANUAL Model # 4KTV9 QUALITY GUARANTEE: Should a Westward product fail to perform satisfactorily due to defect or poor workmanship within one
ELECTRIC HEDGE TRIMMER
ELECTRIC HEDGE TRIMMER 60-3014-6 Owner's Manual TOLL-FREE HELPLINE: 1 866 523-5218 IMPORTANT: Read all safety rules and instructions carefully before using this product. TABLE OF CONTENTS SPECIFICATIONS...
Industrivej 3-9 DK 9460 Brovst KEF-MOTOR A/S. Fax Instruction Manual PSD 200 Industrial Grinders
KEF-MOTOR A/S Industrivej 3-9 DK 9460 Brovst Tlf. +45 9823 6088 Fax. +45 9823 6144 1. Instruction Manual PSD 200 Industrial Grinders EU declaration of conformity KEF-MOTOR A/S Industrivej 3-9 DK-9460 Brovst
English Manual for Jewelry Casting and Investing The professional choice
English Manual for Jewelry Casting and Investing The professional choice QUICK START GUIDE: For thorough instructions, please review attached instructions. However, below, you will find a simplified start-up
Code UB-3300VECK Cyclone Extractor
Code 210643 UB-3300VECK Cyclone Extractor AT&M: 16/01/2017 CONTENTS IMPORTANT SAFETY RULES-------------------------------------------------------------- 2 IMPORTANT SAFETY RULES FOR DUST COLLECTORS---------------------------
4-GALLON MOBILE PARTS WASHER
Please read and save these instructions. Read through this owner s manual carefully before using product. Protect yourself and others by observing all safety information, warnings, and cautions. Failure
150MM ELECTRIC EARTH BORER
150MM ELECTRIC EARTH BORER MODEL NO: CEA150 PART NO: 3400997 OPERATING & MAINTENANCE INSTRUCTIONS GC0915 INTRODUCTION Thank you for purchasing this CLARKE Electric Earth Borer designed for boring holes
SPECIFICATIONS FEATURES
FEATURES Excellent for collecting the large chips which will drop into the garbage can before reaching the impeller. The filter bag filters out the remaining sawdust down to 5 microns. With the cyclone
XC-18. NOTE: *Machine shown without Lift-Up Safety Guard. This guard is included with machine. Machine should not be operated without this guard.
XC-18 NOTE: *Machine shown without Lift-Up Safety Guard. This guard is included with machine. Machine should not be operated without this guard. EXTREMA MACHINERY COMPANY, INC. PO BOX 1450, ALBANY, LOUISIANA
Please read the instructions before operating the machine. Vänligen läs instruktionsboken innan maskinen används.
Safety Instruction Tormek Water Cooled Grinders run at a slow speed in water and are designed for maximum safety. However as with all machines there are some basic rules that must be followed to reduce
Bob-White Systems: AUTOMATED BOTTLE FILLER
Bob-White Systems: AUTOMATED BOTTLE FILLER PRODUCT CAPPER MANUAL General Safety Rules WARNING: READ ALL INSTRUCTIONS. Failure to follow the safety rules listed below and other basic safety precautions
50 Litre Dust Collector
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
SHOPSMITH DC-330L DUST COLLECTOR OWNER S MANUAL. For more information: For Question or Support: (937)
SHOPSMITH OWNER S MANUAL For more information: www.shopsmith.com For Question or Support: (937) 890-5197 SHOPSMITH DC-330L DUST COLLECTOR 845620 TABLE OF CONTENTS 1. Safety... 2 2. Unpacking and Checking
Mini-Rooter Operating Instructions
Mini-Rooter Operating Instructions For 1-1/4 through 4 lines (30mm 100mm) Your Mini-Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.
Bench Grinder. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
TCUT10UL 2.5 HP 10 Tile Saw Assembly & Operating Instructions
TCUT10UL 2.5 HP 10 Tile Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance.
DUST COLLECTOR KC-3105KWRC SEE PAGE 16 MODEL: KC-3105C INSTRUCTION MANUAL 1999 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC.
KC-3105KWRC SEE PAGE 16 DUST COLLECTOR MODEL: KC-3105C INSTRUCTION MANUAL COPYRIGHT C 1999 ALL RIGHTS RESERVED BY KING CANADA TOOLS INC. IMPORTANT INFORMATION THANK YOU FOR PURCHASING THIS KING CANADA
1 supply. Belt Sander INSTRUCTION MANUAL. y::;:,' mm (3") MODEL 9900B. Specifications. DOUBLE INS ULATlO N. Continuous. Belt speed 1.
Belt Sander 76 mm (3") MODEL 9900B INSTRUCTION MANUAL DOUBLE INS ULATlO N Specifications Belt size Belt speed rating I Continuous (Input) y::;:,' supply Power cord 76 mm x 533 mm (3") x (2") 360m /min.
D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL
D O U B L E A U G E R M O R TA R M I X E R OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
PORTABLE HAND POWER THREADER 1/2-2
PORTABLE HAND POWER THREADER 1/2-2 Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or
1HP Dust Collector. Please read and fully understand the instructions in this manual before operation. Keep this manual safe for future reference.
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
60In. Ceiling Fan. Owner s Manual
60In. Ceiling Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
WET-DRY VACUUM CLEANER 4 GALLON CAPACITY
WET-DRY VACUUM CLEANER 4 GALLON CAPACITY Model 91019 OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight
ASSEMBLY AND OPERATING INSTRUCTIONS 1HP DUST EXTRACTOR. FOX Model F50-841
ASSEMBLY AND OPERATING INSTRUCTIONS 1HP DUST EXTRACTOR FOX Model F50-841 1 1hp Dust Extractor FOX MODEL F50-841 TABLE OF CONTENTS Safety instructions Page 3 Specific safety instructions for dust collectors.page
20 TON AIR/MANUAL SHOP PRESS
20 TON AIR/MANUAL SHOP PRESS Instruction Manual 1 Please read this instruction manual carefully before use. IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS N WARNINGS.
Work-Shed Vac 1100 Watt
Work-Shed Vac 1100 Watt Operation Manual 3 Year Replacement Warranty WVG-951 To view the full range visit: www.ozito.com.au 0209 SPECIFICATIONS MODEL NO. WVG-951 Motor: Input: Max. vacuum: Hose length:
Thank You & Congratulations On Your Purchase of: ARBE Model # MD-205 Table Top Dust Collector
Thank You & Congratulations On Your Purchase of: ARBE Model # MD-205 Table Top Dust Collector " The Most Powerful Dust Collector n ts Class... Guaranteed!" A R BC. t...,,,'.~ilme"fg.,nc. -, 54 AileD Blvd'.
22In. Oscillating Pedestal Fan. Owner s Manual
22In. Oscillating Pedestal Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
DIE GRINDER INSTRUCTIONS IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
DIE GRINDER STOCK No.57842 110V 57843 230V PART No.DG528 INSTRUCTIONS IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL. GENERAL INFORMATION This manual
Easy Rooter. Operating Instructions
Easy Rooter Operating Instructions For 3" through 10" lines (75mm 250mm) Your Easy Rooter is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator.
ASSEMBLY AND OPERATING INSTRUCTIONS 3HP DUST EXTRACTOR. FOX Model F50-843
ASSEMBLY AND OPERATING INSTRUCTIONS 3HP DUST EXTRACTOR FOX Model F50-843 1 3hp Dust Extractor FOX MODEL F50-843 TABLE OF CONTENTS Safety instructions Page 3 Specific safety instructions for dust collectors.page
CYCLONETM ROTARY TUMBLER INSTRUCTION GUIDE
Lyman CYCLONETM ROTARY TUMBLER INSTRUCTION GUIDE Visit our complete Lyman website at www.lymanproducts.com WARNING: This appliance is not intended for use by persons (including children) with reduced physical,
User Manual AIR HOG. Vacuum Booster REV. 3/20/ Stowe Dr. Poway, CA P: (858) F: (858)
User Manual AIR HOG Model: 7303L Vacuum Booster REV. 3/20/18 13655 Stowe Dr. Poway, CA 92064 P: (858) 679-1191 F: (858) 726-6005 INTRODUCTION Dear Customer: Congratulations on the purchase of your new
PORTABLE HAND POWER THREADER 1/2-2
PORTABLE HAND POWER THREADER 1/2-2 Read this Operator s Manual carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or
High-Velocity Floor Fan
High-Velocity Floor Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
EHG2000. ORIGINAL INSTRUCTIONS Heat Gun
EHG2000 ORIGINAL INSTRUCTIONS Heat Gun Important! It is essential that you read the instructions in this manual before operating this machine. Subject to technical modifications. Safety SAFETY RULES WARNING
20 GALLON PARTS WASHER
20 GALLON PARTS WASHER 94702 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
4 TON HYDRAULIC FLOOR PRESS INSTRUCTION MANUEL
4 TON HYDRAULIC FLOOR PRESS INSTRUCTION MANUEL Make sure read and fully understand the instruction manual before using the product IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS
Manual. Belt Sander BSL 115/E. ProxxonTools.com
ProxxonTools.com Belt Sander BSL 115/E Manual 3080767 Conforms to ANSI/UL 60745-1 ANSI/UL 60745-2-4 Certified to CAN/CSA-C22.2 No. 60745-1-04 CAN/CSA-C22.2 No. 60745-2-4-04 Fig. 1 Fig. 2 Fig. 3 Fig. 4
Leaf Blower Vac 91010
3 N 1 Leaf Blower Vac 91010 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
150 WATT PORTABLE CLAMP LIGHT 35149
150 WATT PORTABLE CLAMP LIGHT 35149 ASSEMBLY & OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web Site at www.harborfreight.com Copyright 2006 by Harbor Freight Tools. All
40 GALLON PARTS WASHER
40 GALLON PARTS WASHER 94994 ASSEMBLY & OPERATING INSTRUCTIONS Due to continuing improvement, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA
3-1/2 Gallon Parts Washer
3-1/2 Gallon Parts Washer Model 38347 Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Copyright 1998 by Harbor Freight Tools. All rights reserved. No portion of this manual
Instruction Manual. Cheese Warmer with Pump
Instruction Manual Cheese Warmer with Pump 10700 Medallion Drive, Cincinnati, Ohio 45241-4807 USA 2013 Gold Medal Products Co. Part No. 38298 SAFETY PRECAUTIONS Page 2 INSTALLATION INSTRUCTIONS Inspection
20-GALLON MOBILE PARTS WASHER OWNER S MANUAL
20-GALLON MOBILE PARTS WASHER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in
DUST EXTRACTOR MODEL No: CDE1000
DUST EXTRACTOR MODEL No: CDE000 Part No:64765 OPERATING & MAINTENANCE INSTRUCTIONS GC054 INTRODUCTION Thank you for purchasing this CLARKE Dust Extractor which is intended to keep work areas free from
3.5-GALLON PARTS WASHER OWNER S MANUAL
3.5-GALLON PARTS WASHER OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
Cable Drum Machine. Operation Manual 110ES SERIES. Cleans 1 1/4" to 3" lines up to 25'
Cable Drum Machine Operation Manual 110ES SERIES Cleans 1 1/4" to 3" lines up to 25' Used For: Sinks, Showers &Tub Drains WARNING - Read All Instructions, When Using Electric Tools, Basic Safety Precautions
ATD /8 Electric Drill
ATD-10538 3/8 Electric Drill Tool specifications: Rated Voltage: (V) 120 Rated Frequency: (Hz) 60 Rated current: (A) 3.3 No-load Speed: (RPM) 0-2700 Speed Selection: Yes Right/Left Rotation: Yes Chuck
ELECTRIC FIREPLACE HEATER WITH SINGLE GLASS DOOR
ELECTRIC FIREPLACE HEATER WITH SINGLE GLASS DOOR Model 91797 ASSEMBLY and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure
ASSEMBLY AND OPERATING INSTRUCTIONS PADDLE MIXER. FOX Model F V / 110V
ASSEMBLY AND OPERATING INSTRUCTIONS PADDLE MIXER FOX Model F7860 240V / 110V 1 Paddle Mixer FOX MODEL F7860 240V / 110V TABLE OF CONTENTS Safety instructions Page 3 Specifications Page 5 Environmental
ELECTRIC AIR PUMP 130W INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au WHAT S IN THE BOX. Electric Air Pump. 3 x Inflation Adaptors
WHAT S IN THE BOX ELECTRIC AIR PUMP 130W INSTRUCTION MANUAL SPECIFICATIONS Voltage: 220-240V ~50Hz Power: 130W Max. Current: 0.62A Max. Pressure: 0.6PSI Flow Rate: 440L/Min Inflation Time: Under 2min (double
100In. High Volume Ceiling Fan. Owner s Manual
100In. High Volume Ceiling Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
Cable Drum Machine. Operation Manual 40 SERIES. Cleans 2" to 4" lines up to 75' N O T F O R R O O T S
Cable Drum Machine Operation Manual 40 SERIES Cleans 2" to 4" lines up to 75' Used For: Sinks, Showers & Floor Drains N O T F O R R O O T S WARNING - Read All Instructions, When Using Electric Tools, Basic
Sip Vacuum Cleaner 1400/35 Wet & Dry
Please dispose of packaging for the product in a responsible manner. It is suitable for recycling. Help to protect the environment, take the packaging to the local amenity tip and place into the appropriate
PARTS WASHER Model: CW1D Part No:
PARTS WASHER Model: CW1D Part No: 7630900 OPERATING & MAINTENANCE INSTRUCTIONS GC01/12 INTRODUCTION Thank you for purchasing this CLARKE Parts Washer. Before using the product, be sure to read these instructions
1/3 SHEET ORBITAL SANDER MODEL No. COS200
1/3 SHEET ORBITAL SANDER MODEL No. COS200 OPERATING & MAINTENANCE INSTRUCTIONS 1107 SPECIFICATIONS Elec. Supply... 230V 50Hz 1 ph Power Rating... 150 Watts Fuse Rating... 5 Amps No Load Speed... 10,000
14 Upright Vacuum with HEPA Filter & Dual Power
E29990-00 14 Upright Vacuum with HEPA Filter & Dual Power Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 888-GO-BETCO Fax: 800-445-5056 Technical Service: 877-856-5954
GENERAL POWER TOOL SAFETY WARNINGS
GENERAL POWER TOOL SAFETY WARNINGS WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save
WizCG grinder. WizlingCG grinder INSTRUCTION MANUAL
WizCG grinder WizlingCG grinder INSTRUCTION MANUAL SAFETY INSTRUCTIONS IMPORTANT! READ FIRST For your own safety be sure to read, understand and follow all warnings, safety rules and instructions in this
Register at
Power Shovel Model No. 38361 Serial No. 313000001 and Up Register at www.toro.com. If, after carefully reading this manual, you still have questions or problems, call toll free 1-800-808-2963 (US) or 1-800-808-3072
DUST/CHIP EXTRACTOR OPERATING & MAINTENANCE. MODEL No. CDE7B INSTRUCTIONS. Part Part No
DUST/CHIP EXTRACTOR Part 6460200 MODEL No. CDE7B Part No. 6470305 OPERATING & MAINTENANCE INSTRUCTIONS 0305 -1- -14- -13- IMPORTANT Before commencing please check contents and advise immediately of any
20In. Oscillating Wall-Mount Fan. Owner s Manual
20In. Oscillating Wall-Mount Fan Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
OPERATING & MAINTENANCE INSTRUCTIONS
PARTS WASHER MODEL NO: CW1D PART NO: 7630900 OPERATING & MAINTENANCE INSTRUCTIONS ORIGINAL INSTRUCTIONS GC0318 REV 4 INTRODUCTION Thank you for selecting this CLARKE Parts Washer. Before using the product,
OWNER S MANUAL #DC2000Y #DC2000YCF 2 HP, 1500 CFM DUST COLLECTOR. VERSION 1 -w/ 6 INLET PORT. Model #DC2000Y Global Rd.
OWNER S MANUAL #DC2000Y #DC2000YCF 2 HP, 00 CFM DUST COLLECTOR VERSION 1 -w/ 6 INLET PORT Model: #DC2000YCF 9900 Global Rd. Philadelphia, PA 191 Model #DC2000Y Thank you for purchasing one of PSI s growing
Hot-Rodder Operating Instructions
Hot-Rodder Operating Instructions For 3 through 10 (75mm 250mm) Your Hot-Rodder is designed to give you years of trouble-free, profitable service. However, no machine is better than its operator. Read,
2000W HOT AIR GUN INSTRUCTIONS IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
2000W HOT AIR GUN STOCK No.64261 PART No.HG2000 INSTRUCTIONS IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL. IMPORTANT: The heating wire element of
CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL
KING COBRA 310 120V INFORMATION & OPERATING INSTRUCTIONS U. S. PRODUCTS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL 56041963 IMPROPER USE OF THE MACHINE
OPERATING INSTRUCTIONS DUST EXTRACTOR FM300S
OPERATING INSTRUCTIONS DUST EXTRACTOR FM300S 0909 CONTENTS TECHNICAL DATA.1 UNPACKING AND CHECKING CONTENTS.2 ASSEMBLY..2 SAFETY RULES.5 WIRING DIAGRAM...6 PARTS DIAGRAM......8 PARTS LIST. 9 TECHNICAL
AGITATOR V DO NOT OPERATE THE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THESE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
AGITATOR 20 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE THE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THESE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use
GENERAL INFORMATION. INSTRUCTIONS FOR 160L 230V Cement Mixer
INSTRUCTIONS FOR 160L 230V Cement Mixer Stock No.17776 Part No.CM170 IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS PRODUCT. GENERAL INFORMATION These
MN908 No. 282C Replaces 282B LB7013
No. 282C Replaces 282B LB7013 Instruction Manual For Baldor Dust Control Units Models DC7, DC7 3, DC8, DC8 3, DC10, DC10 3, DC12, DC12 3 and DC14 3. For use on Grinders mounted to GA16 and GA20 pedestals
VARIABLE SPEED JIG SAW MODEL No. CJS350. MODEL No. CROS1 Part No OPERATING & MAINTENANCE INSTRUCTIONS
VARIABLE SPEED JIG SAW MODEL No. CJS350 ROTARY ORBITAL Part No. 6460200 SANDER MODEL No. CROS1 Part No. 6462010 OPERATING & MAINTENANCE INSTRUCTIONS 0606 Thank you for purchasing this CLARKE Variable Speed
Instruction Manual. Model No. MT-988. Electric Snow Thrower
Instruction Manual Model No. MT-988 Electric Snow Thrower IMPORTANT: Read and understand this manual before assembling or operating this Electric Snow Thrower. Improper use of Snow Thrower can cause severe
HYBRID DRYER. PDH1 - PDH2 Series. Save These Instructions
OPERATOR S MANUAL & PARTS LIST HYBRID DRYER PDH - PDH Series Save These Instructions Tacony, Inc., All rights reserved WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING
CEMENT MIXER MODEL NO: CCM134L OPERATION & MAINTENANCE INSTRUCTIONS PART NO: GC0514
CEMENT MIXER MODEL NO: CCM134L PART NO: 3400862 OPERATION & MAINTENANCE INSTRUCTIONS GC0514 INTRODUCTION Thank you for purchasing this CLARKE Cement Mixer. Before attempting to use this product, please
457LAVEXDM15 DUAL MOTOR HEPA UPRIGHT VACUUM CLEANER
457LAVEXDM15 DUAL MOTOR HEPA UPRIGHT VACUUM CLEANER IMPORTANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS
3.5 GALLON PARTS WASHER
3.5 GALLON PARTS WASHER Assembly and Operating Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 1997 by Harbor Freight Tools. All rights
ENGLISH (Original instructions) INSTRUCTION MANUAL. Power Mixer UT2204 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Power Mixer UT04 0078 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model UT04 No load speed (min - )
COH-267. COH-2670W Half Size Convection Oven
COH-267 COH-2670W Half Size Convection Oven This manual contains important information regarding your Admiral Craft unit. Please read the manual thoroughly prior to equipment set-up, operation and maintenance.
HYBRID DRYER. PDH1 - PDH2 Series WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT.
OPERATOR S MANUAL & PARTS LIST HYBRID DRYER PDH - PDH Series WARNING: OPERATOR MUST READ AND UNDERSTAND THIS MANUAL COMPLETELY BEFORE OPERATING THIS EQUIPMENT. Tacony, Inc., All rights reserved Save These
IMPORTANT SAFETY INSTRUCTIONS
1800 Power Curve Snowthrower Model No. 38381 Serial No. 313000001 and Up Form No. 3373-449 Rev A Operator's Manual Register your product at www.toro.com IMPORTANT SAFETY INSTRUCTIONS When using an electrical
PWASH Gallon Parts Washer Assembly & Operating Instructions
PWASH20 20 Gallon Parts Washer Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. This manual provides important
Owner s Manual. 1HP Dust Collector Model
Owner s Manual 1HP Dust Collector Model 820680 Operating Your 1HP Dust Collector To the new SuperMax owner: SuperMax takes pride in our products and stands behind them with continuing service and support
English 6. Copyright DEWALT
DC500 1 English 6 Copyright DEWALT 2 1 2 3 4 5 11 10 9 8 7 6 A 3 16 15 5 15 11 13 14 12 B C 15 6 16 17 18 8 9 17 4 D E 3 7 2 19 7 4 F G 19 20 21 H 5 ENGLISH VACUUM CLEANER DC500 Congratulations! You have
2001 Smith Eastern Corporation
Automatic Spray Equipment Cleaning System User s Manual UG-45V Smith Eastern Corporation 10630-S Riggs Hill Road Jessup, Maryland 20794-9425 USA 301.497.7600 800.937.HVLP (4857) Fax 301.497.7613 cleaner@airverter.com
HEDGE TRIMMER. 550W 450mm WARRANTY INSTRUCTION MANUAL SPECIFICATIONS. ozito.com.au HTE-550 WHAT S IN THE BOX
WHAT S IN THE BOX HEDGE TRIMMER 550W 450mm INSTRUCTION MANUAL SPECIFICATIONS Input: 230-240V ~ 50Hz Motor: 550W No Load Speed: 1,400/min Blade Length: 450mm Max. Cutting Capacity: 16mm Weight: 2.9kg ozito.com.au
VARIABLE SPEED GRINDER OWNER S MANUAL R MANUAL VERSION SERIAL #
R3.5 VARIABLE SPEED GRINDER SERIAL # MANUAL VERSION CONFORMS TO UL STD 763, NSF/ANSI STD 8 CERTIFIED TO CSA STD C22.2 #95 CONFORMS TO CE, IEC TESTED 2. Introduction WARNING: To limit risk of personal injury