Line Smoke Detector LRMX
|
|
- June Rich
- 6 years ago
- Views:
Transcription
1 Line Smoke Detector LRMX Motorized detector head User-friendly commissioning via automatic selfadjustment Disturbance-protected operation via automatic electromechanical tracking of the detector head during building movements Optimal access via remote operating unit at eye level Clear representation of all states via central indicator display on the operating unit High level of IP protection for usage under difficult environmental conditions Activation and reset via esserbus Transponder 0. during loop operation s from to 0 m Large assortment of accessories The LRMX Line Smoke Detector marks a new generation of infrared light-beam detectors in compliance with EN -. Based on the light absorption principle, the sender sends a pulsated infrared beam of light to the prism reflectors which are to be mounted opposite the detector. These prisms reflect the light back to the receiver. If smoke should enter the infrared light beam and dim it to a defined degree, a signal is forwarded via the esserbus Transponder to the fire alarm control panel (FACP). Both fire alarms as well as disturbance alarms are forwarded to the FACP. The prominent feature of this new generation is the automatic alignment at initial start-up and the regular adjustment of the detector head via the integrated engine in the detector. This simplifies start-up considerably and thus it can be carried out more quickly. Due to the automatic self-adjustment of the detector during even the slightest building movements, as for example due to length extensions, temperature variations, etc., the LRMX can always retain the optimal position of the initial alignment and thus is even more protected from disturbance. Operation is user-friendly via the ground-level operating and control unit which is operated remotely from the detector. The power is supplied directly to the detector, so that in the case of an operating and control unit failure, continuing operation of the LRMX is guaranteed. The operating and control indicator has an indicator display which shows all reports and states clearly and at eye-level. With the aid of the display, a manual alignment of the detector is also possible even in the case of very difficult initiation conditions, as the horizontal and vertical coordinates of the infrared light-beam are represented in detail. The connection to the esserbus-loop is carried out via the esserbus Transponder 0. in the usual manner. Resetting can also be easily carried out via this esserbus Transponder: using the tools 000 programming and service software, the relays on the transponder can be programmed as reset relays and the reset time can be set individually. In conclusion, the LRMX on the esserbus represents a significant advance in the world of line smoke detectors and guarantees an extremely high degree of disturbance-free and low-maintenance operation. esserbus/esserbus-plus V DC Application Example
2 0. m/!$ Linear Smoke Detector LRMX The linear smoke detector in compliance with EN - consists of detector, operating and control unit and one prism reflector. The connection to the esserbus and the resetting is carried out via the esserbus Transponder 0.. The connection to a conventional detector zone is carried out via the Reset Module. This device requires a external voltage supply of V DC for the galvanic separation of D.C. voltage potentials and the voltage converter is to be used in order to avoid ground faults. Motorized detector head User-friendly commissioning via automatic selfadjustment Disturbance-protected operation via automatic electromechanical tracking of the detector head during building movements Optimal access via remote operating unit at eye level Clear representation of all states via central indicator display on the operating unit High level of protection from moisture for usage under difficult environmental conditions Activation and reset via esserbus Transponder 0. during loop operation This device works with the use of a prism reflector at a range of from m to 0 m. AT larger ranges, the Extender or should be used V DC Current consumption ma (in all operational states) to 0 m Type of protection IP W: mm H: mm D: mm W: 0 mm H: mm D: mm (Operating Unit) W: 0 mm H: 0 mm D: mm (Single Prism) The LRMX is available on request with built-in heating and front plate with nano coating. Please note that the LRMX with built-in heating has not been -approved! Please also note: the reflector is no longer included with delivery and must be ordered separately! Detector, operating and control unit, prism reflector x cm Reflectors and accessories. m/" /i The individual reflectors and reflector sets can also be used with the Fireray products. However, please observe the additional planning information in the relevant functional descriptions. Reflector set for LRMX, for ranges of up to 0 m Metal reflector set for LRMX range extension of up to 0 m. Steel plate; x reflector... 0 m W: 0 mm H: 0 mm D: mm. m/# /l Reflector set for LRMX, for ranges of up to 0 m Metal reflector set for range extension of LRMX up to 0 m m W: 0 mm H: 0 mm D: mm Reflector sets also available on request with Water-repellent Reflectors (nano coating) or additional built-in heating. Steel plate; x reflector
3 m/$- Single reflector for LRMX Replacement prism single reflector for usage with the Line Smoke Detector m W: 0 mm H: 0 mm Reflector sets also available on request with water-repellent surface or additional built-in heating. m/.k Nano coated reflector for LRMX Reflector sets also available on request with water-repellent surface or additional built-in heating.. m/% /r Ceiling holder for LRMX for distances from 0 to 0 cm For better mounting of the Line Smoke Detector 0 on walls, girders, ceilings and beams. The ceiling bracket is made of aluminum and can be adjusted in length anywhere from 0 to 0 cm. A high-grade ball joint mounting bracket is located on the top side for easy wall/ceiling mounting. The ceiling bracket is suitable for attaching the Mounting Plate. Ceiling bracket incl. mounting material for the aluminum holder but does not include material for mounting of the holder on ceilings, walls or beams. For easy ceiling and wall mounting in compliance with DIN VDE 0- Optimal alignment of detector and reflectors under difficult ambient conditions via ball joint mounting bracket Extendable ceiling bracket for flexible adjustment of length for distances of 00 to 00 mm Invisible cable routing inside of the ceiling Capacity kg Swivel hinge approx. Ball joint approx. 0 and holding fixture for prism reflector RAL 0 (pure white) surface m/& /u. Ceiling holder for LRMX for distances from 0 to cm Same as. but extendable for ceiling clearances from 0 to cm.
4 m/0q m/)< Ceiling holder for LRMX Same as. but mm long rigid design. Flush mounted housing for LRMX For the LRMX, consists of flush mounted tray and vertically adjustable cover plate frame with lockable front door. Color white, similar to RAL 0 W: mm H: mm D: mm (total) W: 0 mm H: 00 mm D: mm (flash mounting) Mounting unit for the LRMX with light cone apertures pre-stamped cable ducts with predetermined breaking points m/*? Substitute test film for LRMX Damping foil for detector testing m//n Nano detector cover Detector cover with nano coating for application to the front of the detector prevents steaming up of detector in difficult environments. m/' Mounting plate for ceiling bracket for detector/single reflector Mounting plate made of aluminium for attaching the Line Smoke Detector 0 or the Prism Reflector on ceiling bracket.
5 m/( Mounting spider for Ceiling Bracket and Mounting spider for the ceiling brackets and for alternativ attachment of the reflector sets and on the ceiling bracket.
6 Fireray m.0o Fireray 0 RV, with one prism The detector consists of an infrared transmitter and receiver. The signal is reflected by a prism and analysed by the receiving element. Signal reaching the threshold will trigger an alarm. The actuation on the loop and the resetting function is carried out via the esserbus transponder 0.. Actuation on a conventional line is carried out via the reset module. The device requires a separate voltage supply of V DC. A compact housing Maximum range m to 0 m Robust construction Complies with EN - standard Actuation and resetting is carried out via the esserbus transponder 0. during loop operation The Fireray is installed approx. 0. to 0. m underneath the ceiling and its reflector with same ceiling distance opposite. There should be no reflecting obstacles in the transmission zone (approx. degrees) V DC Quiescent V DC approx. ma Contact load max. 0 V DC / A to 0 m Ambient temperature -0 C... C Storage temperature - C... 0 C Type of protection lp 0 Housing ABS plastic, flame resistant Color grey, similar to RAL 0 Weight approx. 0 g Detector specification EN - W: mm H: mm D: 0 mm prism esserbus Transponder Monitored Area esserbus / esserbus -PLus retro mirror V DC Operating range: up to 0 m Application example
7 m.r One compact housing Maximum range 0 m to 0 m Robust construction Complies with EN - standard Actuation and resetting is carried out via the esserbus transponder 0. during loop operation m.a Fireray 0 RV, with four prisms The detector consists of the infrared transmitter and receiver. The signal is reflected by a prism and analysed by the receiving element. Signal reaching the threshold will trigger an alarm. The actuation on the loop and the resetting function is carried out via the esserbus transponder 0.. Actuation on a conventional line is carried out via the reset module. The device requires a separate voltage supply of V DC. The Fireray is installed approx. 0. to 0. m underneath the ceiling and its reflector with same ceiling distance opposite. There should be no reflecting obstacles in the transmission zone (approx. degrees). prisms Fireray V DC Quiescent V DC approx. ma Contact load max. 0 V DC / A 0 to 0 m Ambient temperature -0 C... C Storage temperature - C... 0 C Type of protection lp 0 Housing ABS plastic, flame resistant Color grey, similar to RAL 0 Weight approx. 0 g Detector specification EN - W: mm H: mm D: 0 mm Consisting of transmitter, receiver, and remote evaluation unit for light and dark smoke. Coverage: to max. 0 m Width of monitored area: max. m (as per ) Height of monitored area: max. m Area to be monitored: max. 0 m² Automatic compensation for pollution and ageing by -step gain control Rugged metal housing Floating contacts for alarm and trouble Test output for calibration and service Actuation and resetting is carried out via the esserbus transponder 0. during loop operation The actuation on the loop and the resetting function is carried out via the esserbus transponder 0.. Actuation on a conventional line is carried out via the reset module. The device requires a separate voltage supply of V DC..... V DC Quiescent V DC approx. ma Contact load max. 0V DC / A Ambient temperature -0 C... C Storage temperature - C... 0 C Type of protection lp 0 Housing sheet steel Color grey, similar to RAL 0 Weight approx. g (Evaluating unit) approx. 0. kg (Transmitter/Receiver) Detector specification pren - W: mm H: mm D: mm Ø: 0 mm L: mm (receiver/transmitter) x mounting brackets, x screws, x grommets, x test filter esserbus Transponder Monitored Area esserbus / esserbus-plus Transmitter Receiver V DC Operating range: up to 0 m Application example
Fireray 2000 Linear Smoke Detector
Fire Alarm Systems Fireray 2000 Linear Smoke Detector Fireray 2000 Linear Smoke Detector Extended monitoring area Increased security against false alarms with gain control Potential-free, self-holding
More informationWhy choose Fireray? Why use a Beam Smoke Detector? Product Range.
Range Brochure Why use a? Beam smoke detectors are the wide area smoke detection technology of choice, offering both excellent detection and value for money. With a high area of coverage per unit (as high
More informationReflective Optical Beam Smoke Detector User Guide
Reflective Optical Beam Smoke Detector User Guide 1. Installation IMPORTANT NOTE: The infrared beam path MUST be kept clear of obstructions at all times! Failure to comply may result in the system initiating
More informationTable of Contents. 1. Mounting Tips... 2
Table of Contents 1. Mounting Tips............................................. 2 1.1. Connections and DIP switch settings................................... 3 1.2. Mounting the Fireray 50/100RV........................................
More informationFireray Application and. Installation Guide FEATURES. Range metres. 12V to 24V dc operation. Selectable alarm thresholds
Fireray 2000 pplication and FETURES Installation Guide Range 10-100 metres 12V to 24V dc operation Selectable alarm thresholds Low current consumption Ground level electronics Manual or automatic reset
More informationIMPORTANT. PLEASE NOTE: The infrared beam path MUST be kept clear of obstructions at all times!
USER GUIDE English IMPORTANT PLEASE NOTE: The infrared beam path MUST be kept clear of obstructions at all times! Failure to comply may result in the Detector initiating a Fire or Fault signal. Contents
More informationReflective Beam Smoke Detector
Reflective Beam Smoke Detector SRA-ET Features! 5-30m range! Small flat reflector! Powered directly from the zone! Full line continuity options! Automatic compensation! Approved by LPCB & VdS Description
More informationIQ8Control C Fire Alarm Panel
IQ8Control C Fire Alarm Panel State-of-the-art processor technology Maximum cable length for esserbus: 3,500 m Graphics supported, high performance programming tool Innovative alarm signalling by means
More informationSecuriBeam Optical Beam Fire Detectors
SecuriBeam Optical Beam Fire Detectors Product Catalogue 2015 Content 1. Beam Detector BSD... 5 1.1. SecuriBeam BSD 535... 5 1.2. Accessories for BSD... 6 2. Beam Detector ILIA... 8 2.1. SecuriBeam ILIA...
More informationTITLE SLIDE FIRERAY50/100R OPTICAL BEAM SMOKE DETECTOR. Doc. No: Copyright Fire Fighting Enterprises Ltd.
TITLE SLIDE FIRERAY50/100R OPTICAL BEAM SMOKE DETECTOR Doc. No: 32-0008-01 OPTICAL BEAM SMOKE DETECTORS This training material provides information to assist the Fire System Designer and Installer in achieving
More informationSystem 800 Addressable Fire Detection & Alarm System
SECTION 5: page 1 Section 5: System 800 Addressable Fire Detection & Alarm System SECTION 5: page 3 10 reasons to specify 800 1 Plug and Play A user friendly panel not requiring special software tools
More informationMotorised Infrared Optical Beam Smoke Detector. User Guide
Motorised Infrared Optical Beam Smoke Detector User Guide EN 1. General Information 50cm 50cm 8-100m Ensure clear line of sight from Detector to Reflector Mount on solid surfaces (structural wall or girder)
More informationASA linear smoke detector
Sinteso / Cerberus PRO ASA linear smoke detector FDL241-9 Linear smoke detector, used addressed or collectively, ASAtechnology TM Reliable smoke detection in large spaces (indoor application) Detection
More informationViewguard Motion detctors PIR and DUAL detectors
Motion detctors and DUAL detectors Passive infrared sensor Passive infrared and microwave sensor AM DUAL AM DUAL Variations detectors: - AM /BUS-1 VdS Class C EN 5131-1 and EN 5131-2-2, grade 3 - /BUS-1
More informationFIRERAY 5000 range USER GUIDE
FIRERAY 5000 range USER GUIDE 0044-003-04 IMPORTANT PLEASE NOTE: The beam path MUST be kept clear of obstructions at all times! Failure to comply may result in the Detector initiating a Fire or Fault signal.
More informationCOMPACT FLAME CONTROLLER CFC 2000
COMPACT FLAME CONTROLLER CFC 2000 TECHNICAL DESCRIPTION EDITION: TB_CFC2000_EN_REV09_20150408 Important: Please note, that all mounting and wiring as well as all changing or adjustment at the flame monitoring
More informationFCP 320/FCH 320 Conventional Automatic Fire Detectors
Fire Alarm Systems FCP 320/FCH 320 Conventional Automatic Fire Detectors FCP 320/FCH 320 Conventional Automatic Fire Detectors High reliability of detection thanks to evaluation electronics Active adjustment
More informationMotorised Infrared Optical Beam Smoke Detector. User Guide
Motorised Infrared Optical Beam Smoke Detector User Guide EN 1. General Information 50cm 50cm 8-100m Ensure clear line of sight from Detector to Reflector Mount on solid surfaces (structural wall or girder)
More informationMODEL 6200 ANALOGUE ADDRESSABLE OPTICAL BEAM SMOKE DETECTOR
MODEL 600 OPTICAL BEAM SMOKE DETECTOR ADDRESS CODING SW0 ON 4 8 4 8 UNITS TENS DIGIT REQUIRED Switch 8 Switch 4 Switch Switch 0 off off off off off off off on off off on off 3 off off on on 4 off on off
More informationTOOLS 8000 SOFTWARE FOR THE ENTIRE LIFE CYCLE OF YOUR FIRE DETECTION SYSTEMS
TOOLS 8000 SOFTWARE FOR THE ENTIRE LIFE CYCLE OF YOUR FIRE DETECTION SYSTEMS ONE SOFTWARE FOR ALL TASKS tools 8000 is the complete software tool for your fire detection systems. It accompanies you during
More informationBasic Fire Alarm SystemTraining. Arman Alnasar
Basic Fire Alarm SystemTraining Arman Alnasar Agenda Introduction to Esser 10 min Product Overview 5 min Control Panels 30 min Detectors 20 min Field Devices Alarm Devices 20min 10 min Management & Interface
More informationRange brochure. Beam detection. others look up to.
Range brochure Beam detection others look up to FFE, the independent fire detection company, is raising the bar in beam detection with the new Fireray range. The new Fireray range is a cleverly designed
More informationFCS-320-TM Series Conventional Aspirating Smoke Detectors
Fire Alarm Systems FCS-320-TM Series Conventional Aspirating Smoke Detectors FCS-320-TM Series Conventional Aspirating Smoke Detectors For connecting to conventional fire panels High deceptive alarm immunity
More informationCOMPACT FLAME CONTROLLER CFC 1000
COMPACT FLAME CONTROLLER CFC 1000 TECHNICAL DESCRIPTION EDITION: TB CFC1000- REV.6 2012-03-07 Important: Please note, that all mounting and wiring as well as all changing or adjustment at the flame monitoring
More informationConventional Fire Detection
SECTI 4: page 1 Section 4: Conventional Fire Detection Contents System Architecture Control Panel Automatic & Manual Detection Manual Call Points Smoke Detectors Heat Detectors Beam Smoke Detectors Duct
More informationEvolution Analogue Addressable Fire System
Addressable Fire System optimum fire safety systems solutions High speed FSK protocol, uniquely resistant to noise Up to 254 addresses per loop for flexible system design Built to exceptional marine standards
More informationmod. ERHSO712 mod. ERRHSO712 ENGLISH CONTROLLER mod. CSRLS MAINTENANCE ADDITIONAL CONTROLS
CONTENTS mod. ERHSO712 (Transmitter-Receiver version) Basic characteristics.......................................... 3 Product characteristics........................................ 3 Working Principle............................................
More informationIonisation single-tube smoke detector for duct mounting
Detectors Ionisation single-tube smoke detector for duct mounting 600 mm venturi tube is included., incl. end resistor (not RAC(M)) 9...33 V DC (via ABV control unit). 24 V AC ±15 % for RAC(M) models.
More informationINTERNAL DETECTORS. Wired and two-way wireless grade 2 and 3 internal detectors
INTERNAL DETECTORS Wired and two-way wireless grade 2 and 3 internal detectors An extensive range of internal detectors utilising the latest Pyronix patented technologies for residential, commercial and
More informationOptical Beam Smoke Detector RK90R - RK90RS
Optical Beam Smoke Detector RK90R - RK90RS TECHNICAL INFORMATION APPLICATIONS museums churches art galleries libraries hotels shops cinemas computer rooms control rooms storehouses, etc. The RK90R it's
More informationTITLE SLIDE. FIRERAY2000 EExd OPTICAL BEAM SMOKE DETECTOR. Doc. No: Copyright Fire Fighting Enterprises Ltd.
TITLE SLIDE FIRERAY2000 EExd OPTICAL BEAM SMOKE DETECTOR Doc. No: 32-0009-01 OPTICAL BEAM SMOKE DETECTORS This training material provides information to assist the Fire System Designer and Installer in
More informationRetroreflective sensor with polarization filter
Dimensions 45 49 Receiver 27 74 Emitter 92 56 23 6 x 9 slots S 23 25 32 Internal thread (1/2-14 NP) External thread (M30 x 1.5) ø 6 mm Cable 10 Model Number Retroreflective sensor with fixed cable Features
More informationGEZE AUTOMATIC DOOR SYSTEMS GEZE ACTIVATION DEVICES AND SENSOR SYSTEMS PERFECTLY CONTROLLED AUTOMATIC DOOR DRIVES BEWEGUNG MIT SYSTEM
GEZE AUTOMATIC DOOR SYSTEMS GEZE ACTIVATION DEVICES AND SENSOR SYSTEMS PERFECTLY CONTROLLED AUTOMATIC DOOR DRIVES BEWEGUNG MIT SYSTEM Cover photo: Tarık Kaan Muşlu, photo on page 2: GEZE GmbH GEZE ACTIVATION
More informationFDL241-9 Linear smoke detector Mounting Commissioning
FDL241-9 Linear smoke detector Mounting Commissioning 2014-06-27 Control Products and Systems Legal notice Legal notice Technical specifications and availability subject to change without notice. 2011-2014
More informationFIRERAY 2000 EExd Hazardous Area Smoke Detector Installation Guide
FIRERAY 2000 EExd Hazardous Area Smoke Detector Installation Guide KEY FEATURES Flameproof Receiver and Transmitter Standard Fireray Controller Unit High Coverage - up to 1500 2 m per system Low Cost Beam
More informationPHOTOELECTRIC REFLECTIVE BEAM DETECTOR MODEL SRA-ET. Mounting Guidelines
PHOTOELECTRIC REFLECTIVE BEAM DETECTOR MODEL SRA-ET Mounting Guidelines 1. Installing the detector 1.1. Siting Select a suitable position for the installation of both SRA-ET and reflector, such that there
More informationDevices for Special Applications
Overview AP 2/11 UP 2/12 N 26/02 UP 28/11 UP 28/21 N 342 AP24/02 GE 22 GE 23 GE 24 UP 2 AP 2 Control Integrated constant light level control 1-channel 3-channel -- -- -- 1-channel -- -- 1-channel -- 1-channel
More informationSita200plus. 200detectors. Single loop analogue addressable System
Single loop analogue addressable System Fast short circuit isolator in every device 15 combinations of smoke & heat detection modes Loop length up to 2km long with spurs INTELLIGENT FIRE TECHNOLOGY A D
More informationTX7130. Conventional Reflective Beam Detector Installation and Operation Manual. TANDA UK Technology Copyright 2015, All right reserved.
TX7130 Conventional Reflective Beam Detector Installation and Operation Manual Technology Copyright 2015, All right reserved. Product Safety To prevent severe injury and loss of life or property, read
More informationRetroreflective sensor with polarization filter
Dimensions 45 49 Receiver 23 27 74 56 Emitter 92 23 6 x 9 slots External thread (M30 x 1.5) 10 25 32 M12 x 1 Sens Delay IMER Model Number Retroreflective sensor with 4-pin, M12 x 1 connector Electrical
More informationSignaling Devices. Acoustic Signaling Devices 298. Optical Signaling Devices 309. Bosch Security Systems B.V.
Signaling Devices Acoustic Signaling Devices 28 Optical Signaling Devices 30 26 Signaling Devices Acoustic Signaling Devices Acoustic Signaling Devices MSS300-SA SG 200 DS 10 LSN/GLT GLT GLT GLT Operating
More informationFAP-420/FAH-420 Automatic Fire Detectors LSN improved version
Fire Alarm Systems FAP-420/FAH-420 Automatic Fire Detectors LSN improved version FAP-420/FAH-420 Automatic Fire Detectors LSN improved version ombination of optical, thermal and chemical sensors with intelligent
More informationFireray5000-EN. Fire Alarm Systems Fireray5000-EN. Extended monitoring range. Up to 2 detectors per system controller
Fire Alarm Systems Fireray5000-EN Fireray5000-EN www.boschsecrity.com Extended monitoring range Up to 2 detectors per system controller Two pairs of fire and falt relays (one per detector) Transmitter
More informationcompact office 24V compact office 24V Lux
Presence detector compact office 24V compact office 24V Lux Art. Nr. 201 4 000 Art. Nr. 201 4 001 D F GB E I NL S N FIN DK Bedienungsanleitung 2 Notice d utilisation 22 Installation manual 42 Manual de
More informationMounting bezel Retaining spring. Detects movement within the detection range, allowing load control in response to changes in room occupancy.
Installation Guide High-Bay PIR Presence/Absence Detector (317) The 317 High-Bay PIR Presence/Absence Detector, in conjunction with a Helvar lighting control system, provides automatic control of lighting
More informationPerformance Specifications LSF LIFT-SMOKE-FREE
Performance Specifications LSF LIFT-SMOKE-FREE Lift shafts and machinery rooms must be ventilated and equipped with a smoke and heat exhaust ventilation (SHEV) system in accordance with the currently valid
More information64.7 Ø85. (1) Sensor inset (2) Lens pluggable. (3) Protection cover (covers the high-voltage terminals). (4) Ceiling (drill hole Ø70mm).
Flush Mount PIR Motion Sensor PIR 1-10V Dimming with Remote Control Mechanical Structure 70mm 64.7 4 56 68.1 73.3 Ø85 3 (1) Sensor inset (2) Lens pluggable Infrared receiver 1 Photocell LED indicator (3)
More informationProtecting you and your home
Gira smoke alarm device Dual Q Dual Q sounds the alarm when dangerous smoke formation is detected and fulfils the increased Q-Label quality requirements. Dual Q is a combined heat and smoke detector, thanks
More informationGEZE AUTOMATIC DOOR SYSTEMS GEZE ACTUATION DEVICES AND SENSOR SYSTEMS PERFECTLY CONTROLLED AUTOMATIC DOOR DRIVES BEWEGUNG MIT SYSTEM
GEZE AUTOMATIC DOOR SYSTEMS GEZE ACTUATION DEVICES AND SENSOR SYSTEMS PERFECTLY CONTROLLED AUTOMATIC DOOR DRIVES BEWEGUNG MIT SYSTEM Cover photo: Tarık Kaan Muşlu, photo on page 2: GEZE GmbH GEZE ACTIVATION
More informationEnd To End Optical Beam Smoke Detector. Additional Information
End To End Optical Beam Smoke Detector Additional Information EN 1. Multiple Zone Wiring When using more than one System Controller on a single zone of a conventional Fire Control Panel (FCP), it is important
More informationChilled Water DOAS Fan Powered Terminal Units
Chilled Water DOAS Fan Powered Terminal Units CHILLED WATER DOAS FAN POWERED TERMINAL UNITS DOAS TERMINAL UNITS FEATURES AND BENEFITS MINIMUM VENTILATION CONTROL The DOAS unit provides the Designer, Owner
More informationConcepts for the secure networking of large building complexes
Concepts for the secure networking of large building complexes Secure conditions: competence & responsibility Due to our extensive product portfolio, you can realize projects with us which, because of
More informationXenex Conventional Fire Detection & Alarm System
SECTI 4: page 1 Section 4: Xenex Conventional Fire Detection & Alarm System SECTI 4: page 3 Xenex system architecture Beam Transmitter Beam Receiver End of Line Call Point Smoke Detector Smoke Detector
More informationOIL FILM DETECTOR (Flame-proof Version) SODL-1600
OIL FILM DETECTOR (Flame-proof Version) SODL-600 The model SODL-600 is a flame-proof type oil film detector. This model monitors a water surface for the presence of an oil film floating on the surface.
More informationA T L A S - SolarClimatic Test Cabinet SC 2000 MHG
A T L A S - SolarClimatic Test Cabinet SC 2000 MHG A T L A S - SolarClimatic Type Test chamber capacity SC 2000 MHG approx. 3400 l Radiation area approx. 1.36 m 2 TECHNICAL DATA Characteristic values for
More informationOptical Smoke Detector Heat Detector Manual Call Point Output Unit Isolator
TECHNICAL GUIDE Optical Smoke Detector Heat Detector Manual Call Point Output Unit Isolator The XPlorer Range XPlorer is a new range of analogue addressable detectors and interfaces developed for all who
More informationLeuze electronic. Dimensioned drawing. Electrical connection. Accessories: 150m ISO 9001
Throughbeam photoelectric sensors Dimensioned drawing 15m 1-3 V DC A 2 LS Throughbeam photoelectric sensors with high performance reserve in infrared light Robust metal housing with glass cover, protection
More informationHEATSTRIP COSY WARMTH
HEATSTRIP COSY WARMTH HEATSTRIP is based on an innovative radiant heat concept; it is developed and produced exclusively in Germany. Unlike traditional infrared heaters, HEATSTRIP does not emit any disturbing
More informationSeries Internal Detector
F Series Internal Detector Ultra-Small, ultra-high-sensitive smoke/heat It is also very important to take measures to protect equipment from fire Ultra-Small is 1/10 the size of conventional s, and 50
More informationPassive infrared ceiling sensor
Passive infrared ceiling sensor 88 Description Control and command device, powered by the SCS BUS, with two different sensors, the combination of which enables managing the light level inside the room,
More informationRS Pro Infrared Temperature Sensor
Instruction Manual RS Pro Infrared Temperature Sensor Stock Number: 161-8103 Introduction The RS Pro Infrared Temperature Sensor is a device for measuring the temperature of the surface of a solid or liquid
More informationIntelligent addressable fire alarm control panel
Intelligent addressable fire alarm control panel Input current consumption: Panel rating: Batteries: Networking and Interfaces Panel to panel communication: Number of panels: Interface port: System capacity
More informationARGUS movement detectors
ARGUS movement detectors Working principle Almost all movement detectors, including the ARGUS, function according to the principle of passive infrared technology. They measure and compare the infrared
More informationDipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str Grünberg Phone: Fax:
Dipl.-Ing. W. Bender GmbH & Co. KG Londorfer Str. 5 35305 Grünberg Phone: 040 807-0 Fax: 040 807-259 Alarm indicator and test combination MK2430 Remote alarm indicator and test combination with LC display
More informationtools 8000 The perfect all-round tool: tools 8000 Programming and service software for alarm systems Fire detection technology
tools 8000 The perfect all-round tool: tools 8000 Programming and service software for alarm systems Fire detection technology 02 03 The circle is complete: programming from installation to maintenance
More informationInterface and EOL Modules 8
Interface and EOL Modules Interface Modules Series 420 25 Interface Modules Series 100 291 EOL Modules 293 254 Interface and EOL Modules Interface Modules Series 420 Interface Modules Serie 420 Interface
More informationARGUS Smoke Detectors. The next generation. Safety and security electronics
ARGUS Smoke Detectors The next generation Safety and security electronics 2 Argus Smoke Detectors The next generation 10.2015 Safety and security electronics Powerful new functions The new ARGUS Smoke
More informationOpen-area Smoke Imaging Detection (OSID)
Open-area Smoke Imaging Detection (OSID) OSID Smoke Detection Open-area Smoke Imaging Detection (OSID) by Xtralis is a new innovation in projected beam smoke detection technology. By using advanced dual
More informationCOMPACT FLAME CONTROLLER CFC 200 (Formerly 8.XX)
COMPACT FLAME CONTROLLER CFC 200 (Formerly 8.XX) TECHNICAL DESCRIPTION EDITION: TB CFC200-REV3-2015-04-07 IMPORTANT: Please note, that all mounting and wiring as well as all changing or adjustment at the
More informationOpen-area Smoke Imaging Detection (OSID)
Open-area Smoke Imaging Detection (OSID) www.xtralis.com/osid Large, open spaces warehouses, airports, train stations, stadiums and shopping malls pose unique challenges to reliable fire detection due
More informationZIOU/230 - MAINS IO INSTRUCTION MANUAL
Description ZIOU/230 - MAINS IO INSTRUCTION MANUAL The Mains IO Modules are fully monitored loop powered devices which permit the interfacing of third party equipment with the Fire Alarm Control panel
More informationDimensions. Electrical connection. Model Number. Features. Indicators/operating means. Product information RAVE-D-NA. Radar sensor
Dimensions 139.6 103 99.6 46 130.7 Electrical connection Model Number Radar sensor Features Degree of protection IP67 Differentiated detection of people and vehicles, each with one output relay Cross-traffic
More informationGeneral Purpose Photoelectric Sensor
EZ-EYE 2 General Application Photoelectric Sensors General Purpose Photoelectric Sensor www.ttco.com 800-237-0946 2-37 General Application Photoelectric Sensors 2 EZ-EYE The EZ-EYE miniature photoelectric
More informationcompact office 24V compact office 24V Lux
Presence detector compact office 24V compact office 24V Lux Art. Nr. 201 4 000 Art. Nr. 201 4 001 D F GB E I NL S N FIN DK Bedienungsanleitung 2 Notice d utilisation 21 Installation manual 40 Manual de
More informationInstallation Guide. Ceiling PIR Detector (311) Features and Connections
Installation Guide Ceiling PIR Detector (311) The 311 Ceiling PIR Detector is a compact unit containing sensors to provide energy-saving functions when used in a DALI system. Functioning as a presence
More informationFlame Monitors BROCHURE
Flame Monitors BROCHURE JUNHO 2013 monitor Self-monitoring and fail-safe compact flame monitor for the monitoring of gas, oil and coal flames with integrated UV, VIS or IR flame sensor, primarily in single
More informationCODESEC FIRE ALARM SYSTEMS. security technologies
CODESEC FIRE ALARM SYSTEMS security technologies AA402 ADRESSABLE FIRE ALARM CONTROL PANEL AA402 Electronic Addressable Intelligent Fire Alarm Control Panel Onboard one loop, 250 nodes per loop, Metal
More informationMINERVA MZX125 Digital Addressable Fire Detection System
DATASHEET MINERVA MZX125 Digital Addressable Fire Detection System The Minerva MZX125 is a highly featured digital addressable panel with a comprehensive but easy to operate user interface. The system
More informationAnaLASER II Detector. Protection Systems. A UTC Fire & Security Company. High-Sensitivity Smoke Detector (HSSD ) FEATURES DESCRIPTION
AnaLASER II Detector High-Sensitivity Smoke Detector (HSSD ) F-89-250 FEATURES Air Sampling Smoke Detector for Early Warning Applications Two Versions Available: Standard Detector and Ultra Detector STANDARD
More informationAddressable Fire Alarm Control System 2100 series
Addressable Fire Alarm Control System 2100 series It adopts new generation high-speed microprocessor technology that has a data processing speed and a data storage capacity 100 times and 1000 times higher
More informationDräger Polytron Fixed Gas Detector. Dräger Polytron 5700 Infrared DrägerSensor PIR 7000 to detect combustible gases and vapors
Dräger Polytron 5700 Fixed Gas Detector Dräger Polytron 5700 Infrared DrägerSensor PIR 7000 to detect combustible gases and vapors Dräger Polytron 5700 Including e-box for increased safety wiring The Dräger
More informationDuct Air Quality Sensors
1 962 QPM2102D QPM2160D, QPM2162D QPM2100, QPM2102 QPM2160, QPM2162 Duct Air Quality Sensors QPM21 With maintenance-free CO 2 sensing element based on optical infrared absorption measurement (NDIR 1 )
More informationSENSOR SOLUTIONS FOR DOORS
SENSOR SOLUTIONS FOR DOORS Application Overview Safety Light Curtain RAY-LG Pedestrian Door Switch ENTRYSENSE Non-Contact Edge RAY-NC Opto-Electronic Safety Edge OPTOEDGE Photo Eyes RAYTECTOR, RAY-M, RAY-RT,
More informationInstallation and Operation Manual
[Please read this installation & operation manual before install and use this Installation and Operation Manual Address: 8-701,Dongfangming Industry Zone, Dabao Road., Baoan, Shenzhen, China-518101 Page
More informationSnifter ATEX22 VERSION. User Manual. Distributor
Snifter ATEX22 VERSION User Manual Distributor Version 1.4 09/09/2009 Table of Contents 1. INTRODUCTION... 3 1.1. Safety... 3 1.2. Product overview... 4 1.3. How does it work?... 4 2. INSTALLATION... 5
More informationALARMLINE ANALOGUE Linear Heat Detection System
ALARMLINE ANALOGUE Linear Heat Detection System Alarmline Analogue cable senses temperature variations by continuously monitoring the resistance of specially doped Negative Temperature Coefficient (N.T.C.)
More informationFR-A180 FR-A360. Occupancy detector. Use
5 488 Occupancy detector with daylight sensor Occupancy detector with integral daylight sensor for demand-based control of HVAC systems and lighting. Adjustable switch-on and switch-off delay Adjustable
More informationthis is by far the best beam money can buy
It s the ultimate optical beam smoke detector available today, it will self align when commissioning and continually re-align itself against building movement in normal service. Ease of use and unprecedented
More informationProduct DELTA i-system DELTA profil titanium white 5WG HB11 pearl grey 5WG AB01 Motion detector
Product DELTA i-system DELTA profil titanium white 5WG1 258-2HB11 pearl grey 5WG1 255-2AB01 carbon metallic 5WG1 258-2HB21 titanium white 5WG1 255-2AB11 aluminum metallic 5WG1 258-2H1 anthracite 5WG1 255-2AB21
More informationCBC - Active Chilled Beam. Halton CBC. Active Chilled Beam
Halton CBC Active Chilled Beam Combined cooling, heating, and supply air unit for flush installation within a suspended ceiling Well suited for spaces with high cooling loads and low humidity load Ideal
More informationIR FLAME DETECTOR RIV-601/F
IR FLAME DETECTOR EN 54-10 class 2 VdS approval G 205044 application manual CONTROL LOGIC rev. 4 DEC07 MAFE DEC07 IR FLAME DETECTORS SUMMARY Page general notions...3 description...4. Electrical and general
More informationUP 258E11 OPTISENS OFFICE
Product and functional description The UP 258E11 is a presence/motion detector with integrated 2-point light control. The UP 258E11 device communicates via KNX/EIB with actuators or other KNX devices.
More informationSynova TM product catalog.
Synova product catalog Synova TM product catalog. Fire protection products and accessories. Siemens Switzerland Ltd Building Technologies Group International Headquarters Gubelstrasse 22 CH-6301 Zug Tel
More informationComfort Ceiling Fan Coil System INDULVENT ec. Draught-free ambient air distribution with cooling capacity up to 2600 W
Comfort Ceiling Fan Coil System INDULVENT ec NEW Draught-free ambient air distribution with cooling capacity up to 2600 W Low sound power levels Only electrical, cooling water and condensate connections
More informationfor relative humidity and temperature
1 861 1861P01 Duct sensor for relative humidity and temperature QFM65 Operating voltage AC 24 V Signal output DC 0...10 V for relative humidity and temperature Measurement accuracy ±3 % r. h. within the
More informationDimensions. Electrical connection. Model Number. Features. Indicators/operating means. Product information RAVE-D. Radar sensor
Dimensions 139.6 103 99.6 46 130.7 Electrical connection Model Number Radar sensor Features Degree of protection IP67 Differentiated detection of people and vehicles, each with one output relay Cross-traffic
More informationConsultant Specification AGILE Wireless Fire Detection System
Contents Scope of Work... 2 The EN54 Part 2 & 4 Fire System... 2 Standards... 2 Wireless Intelligent Photoelectric Smoke Detector Specification... 4 Wireless Intelligent Thermal Heat Detector Specification...
More informationInstallation Instruction. Fire Alarm Control Panel Compact GB0
Installation Instruction Fire Alarm Control Panel Compact 798237.GB0 Technical changes reserved! G 214072 GB 10.2014 / AC 2014 Honeywell International Inc. Intended use This product may only be used for
More information2 General Application Photoelectric Sensors
SMARTEYE PRO/PRO 2 General Application Photoelectric Sensors Self-Adjusting General Purpose Sensor www.ttco.com 800-237-0946 2-7 General Application Photoelectric Sensors 2 SMARTEYE PRO/PRO The SMARTEYE
More informationINSTALLATION AND MAINTENANCE INSTRUCTIONS 6500R AND 6500RS REFLECTIVE TYPE PROJECTED BEAM SMOKE DETECTOR
INSTALLATION AND MAINTENANCE INSTRUCTIONS 6500R AND 6500RS REFLECTIVE TYPE PROJECTED BEAM SMOKE DETECTOR GENERAL The model 6500R is a conventional long range projected beam smoke detector designed to provide
More information