ECODAN ecodan can heat rooms and supply domestic hot water, realising greater comfort and energy saving.

Transcription

1 5

2 ECODN ecodan can heat rooms and supply domestic hot water, realising greater comfort and energy saving. ecodan Economic, eco conscious next generation heating system Both energysaving and safe for the environment, the Mitsubishi Electric ecodan incorporates a highly efficient heat pump system that captures the heat in the air, a renewable energy resource. Equipped with advanced inverter control, meticulous temperature control assures comfortable heating, and its spacesaving llinone indoor unit is easy to install. These energysaving, high comfort and simple installation characteristics have drawn the ecodan heating system into the spotlight centre stage. Excellent ecodan s heating performance, even at low outdoor temperature! INDOOR UNIT Cylinder unit Hydro box (Reversible) Hydro box ERSC EHSC/EHPX EHST0C/EHPT0X OUTDOOR UNIT Split type Packaged type SHW0 SW00/0 SW75 SW0/50 HW/0 W85 W50 6

3 Unique technology of ecodan uto daptation ecodan Maximize energy savings while keeping comfort at all times Settings can be performed using an SD card. iming to realise further comfort and energy savings, Mitsubishi Electric is proud to introduce a revolutionary new system control. This is based on data indicating that a drop in the flow temperature improves the coefficient of performance () of the TW system by %. This means that energy savings are dramatically affected by controlling the flow temperature in the system. In conventional system control, the flow temperature is determined based on the preset heat curve depending on the actual outdoor temperature. However, this requires a complicated setting to achieve the optimal heat curve. Heat curve setting (Example) Flow temp If flow temperature is is lowered improved % 5 0 Outdoor temp. Mitsubishi Electric s uto daptation function automatically tracks changes of the actual room temperatures and outdoor temperatures and adjusts the flow temperature accordingly. Our more evolutionary uto daptation function measures the room temperature and outdoor temperature, and then calculates the required heating capacity for the room. Simply stated, the flow temperature is automatically controlled according to the required heating capacity, while optimal room temperature is maintained at all times, ensuring the appropriate heating capacity and preventing energy from being wasted. Furthermore, by estimating future changes in room temperature, the system works to prevent unnecessary increases and decreases in the flow temperature. ccordingly, uto daptation maximises both comfort and energy savings without the need for complicated settings. Two Controls simulation on a day Room temperature slightly increases Temperature/ Load Curtain opened Ventilation fan turned on Increase in Lights occupants turned off Changes in room conditions Flow temperature decreases Room temperature decreases Flow temperature slightly increases The flow temperature through the system controlled via conventional heat curve The flow temperature through the system controlled via Mitsubishi Electric s uto daptation function Energy savings Comfort 6:00 :00 8:00 :00 Time Flow temp. Room temp. Temperature setting Outdoor temp. Future room temperature estimation Room temp. (a) Higher than the target room temp. lower the flow temp. Target temp. (b) pproximately same as the target temp. keep the flow temp. (c) Lower than the target room temp. raise the flow temp. Modify the flow temperature by comparing actual and estimated room temperature. points T0 T Current Future Time llinone & compact Small overall size contributes to easy transportation, installation and maintenance Simplified: ll key functional components are incorporated into the unit. Easy servicing: Relevant parts are located at the front of the unit to access easily. Easy to transport and install using the attached handle both at front and at back (cylinder unit) and also back plate (hydro box unit). Easy to open the packaging without using knife. Compact hydro box unit CONTROL ND ELECTRICL BOX *EXPNSION VESSEL Compact cylinder unit *EXPNSION VESSEL (behind) CONTROL ND ELECTRICL BOX WY VLVE WTER PUMP MNOMETER HNDLES (back) MIN REMOTE CONTROLLER PUMP VLVE *PLTE HET EXCHNGER WTER PUMP STRINER FLOW SWITCH (behind) PRESSURE RELIEF VLVE (behind) BOOSTER HETER PUMP VLVE MIN REMOTE CONTROLLER MNOMETER *PLTE HET EXCHNGER STRINER DJUSTER HNDLE TNK BOOSTER HETER *IMMERSION HETER FLOW SWITCH *Depending on model 7

4 Designed for Optimal ZUBDN New Generation (Split type) Improved heating performance more efficiently ZUBDN is equipped with a unique Flash Injection Circuit that enables the system to provide powerful heating in cold regions during the winter months. nd more evolved ZUBDN New Generation incorporates a new compressor that is more efficient, further improving heating performance when outdoor temperatures is low. The rated heating capacity can now be maintained at 5 even including defrost, making it possible to supply comfortable heating in ever more severe environments. Integrated capacity () pprox. % higher than our previous model! Nominal capacity can be kept at 5! ZUBDN ZUBDN New Generation Outdoorair temperature at intake duct W5 (according to EN 5) Max. possible flow temp. (deg C) /W possible! ZUBDN New Generation Ideal for DHW! Outdoor temp. Mitsubishi Electric s Flash Injection Technology The Key to High Performance at Low Outdoor Temperatures Flash Injection Circuit ZUBDN New Generation Injection compressor (injection port) Flash Injection Circuit Indoor HEX Power receiver B Outdoor HEX Heat Interchanger (HIC) LEV B LEV Refrigerant flow LEV C Flash Injection Circuit Heat interchanger (HIC) B Injection Compressor The Flash Injection Circuit is an original technology developed by Mitsubishi Electric. heat exchange process at point (heat interchanger) transforms liquid refrigerant into a twophase, gasliquid state and then compresses the gasliquid refrigerant at point B (injection compressor). This circuit secures a enough flow rate of refrigerant for heating when outdoor temperatures are very low. In the ZUBDN New Generation, the Flash Injection Circuit is more powerful by improving the heat interchanger to increase the heatexchangeefficiency and incorporating new injection compressor to increase the compressionefficiency. These two improvements of ZUBDN New Generation ensure reliable, efficient heating operation when outdoor temperatures are very low. 8

5 SD* CRD *SD logo is a trademark of SDC, LLC The ecodan evolution continues! For easier settings and for data loggings Settings can be performed using an SD card. Initial setting for ecodan is now simpler than ever before. The special software enables the required initial settings to be saved to an SD card using a personal computer. System setup is as easy as moving the SD card from the computer to the SD card slot in the indoor unit. Compared to the previous procedure of inputting settings using the main controller at a installation field, a remarkable reduction in setup time has been achieved. Thus, it is ideal way for busy installers. *SD card fanction is only used by installer. Hydro box inside Printed circuit board Settings can be performed easily and logging operation data in SD card can be confirmed via personal computer. Control and electric box SD card slot SD card SD card Items that can be preset Simply copying the preset data to SD card, same settings are complete in multiple units easily. Initial settings (time display, contact number, etc) settings uto daptation Heat curve Two different temperatures zones Interlocked boiler operation settings Holiday mode settings Schedule timer settings Domestic hot water settings Legionella prevention settings ll items that are set by the main controller can be set via a personal computer. Data that can be stored Operation data up to a month long can be stored on a SD card (GB). Operation time Defrost time ctual temperature Room Flow temperature Return temperature Domestic hot water temperature Outdoor temperature Error record Input signal etc. Remote controller Stylish, easytoread bright LCD with ergonomically designed intuitive interface Main controller Large screen and backlight for excellent visibility, even in dark environment Multilanguage support ( languages) Can be removed from main unit and installed in remote location (up to 500m) Wide range of convenient functions in response to user demand Functions settings Weekly timer Holiday mode Legionella prevention Error codes and data for serving NEW Two zone control Boiler interlock Floor drying up Quick reading of operation data (7.5 times faster than previous model) Wireless remote controller (optional) Builtin room temperature sensor; easy to place in the best position to detect room temperature Wiring work eliminated Simple design that is easy to operate Remote control from any room without needing to choose an installation location Backlight and big buttons that are easy to operate Domestic hot water boost and cancellation Simplified holiday mode Up to 8 controllers allowed (can be set for zone or individually) PRWR5RE (optional) Receiver Main controller PRWT50RE (optional) Wireless remote controller 9

6 Two zone control Simultaneously making two different temperature zones assures more comfortable, highly convenient heating Settings can be performed using an SD card. ecodan makes it possible to set two temperatures which are used in two different types heat emitters in a system. The system allows adjustment of temperatures when different room temperatures are required, such as a temperature of 0 for the living room radiator and temperature of 0 for floor heating. dditionally, the scheduling for each zone can be set separately by main controller. Two temperature zones Hydro box * Pump Mixing control Mixing valve 0 Flow switch Radiator Pump 0 Mixing tank Flow switch Underfloor heating * = Flow temperature controller *Items such as mixing tank, mixing valve, flow switch and pumps are not included and need to be purchased locally. Intelligent boiler interlock No need to replace existing boiler! utomatic switchover enables even more efficient operation Settings can be performed using an SD card. The flexibility of ecodan s intelligent control allows the system to be combined with boiler currently in use. dditionally, this control can judge which heating source (ecodan, or boiler) to be operated according to situations (outdoor temperature, running cost, CO emission level etc.). Customers using a boiler can receive the energysaving performance of ecodan. Intelligent system combining a boiler with ecodan Two temperature zones Hydro box Room temperature wireless remote controller (option) Electricity *Thermostat (field supply) also can be used. Turning boiler on/off according to operational conditions. Pump Radiator Radiator Other source (Gas, Oil, etc) Mixing tank Boiler *Items such as mixing tank and pump are not included and need to be purchased locally. Multiple unit control Connect up to 6 units utomatic control of multiple units to supply bigger capacity Settings can be performed using an SD card. maximum of 6 ecodan units* can be configured according to the required heating/cooling load of the building. The most efficient number of operating units is determined automatically based on heating/cooling load. This enables ecodan to provide optimal room temperature control, and thus superior comfort for room occupants. lso incorporated is a rotation function that works to balance the running hours without depending on the operation of any one specific unit. If one of the units malfunctions when using Multiple Unit Control, another unit can be automatically operated for backup, thereby preventing system operation from stopping completely. Multiple unit control ratio (%) 00 unit units units units 5 units 6 units lways high efficient operation! slave ON/OFF control slave Total slave Inefficient operation at low capacity. slave slave Multiple unit control One large unit control slave *Only same models (same capacity) are available. master Main RC Multiple unit control 0

7 Split type specifications Indoor unit <Cylinder unit> Model name Type Iersion heater Expansion vessel Solar circuit EHST0CVM6HB EHST0CYM9HB EHST0CTM9HB EHST0CVMB Dimensions HWD Product weight (empty) Type of installation kg Heater Booster 0/Single/50 00/Three/50 0/Three/50 0/Single/50 heater 6 (//6) 9 (/6/9) 9 (/6/9) Current 6 9 Breaker Iersion 0/Single/50 0/Single/50 0/Single/50 heater Current Breaker Domestic hot water tank Volume (net) Material L Operating ambient condition* Target temperature range Room temperature Flow temperature DHW Legionella prevention Sound level (SPL) db () EHST0CVM6B EHST0CYM9B EHST0CVM6EB EHST0CYM9EB EHST0CVM6SB only Floor standing 7 0/Single/50 0/Single/50 6 (//6) 6 00/Three/50 9 (/6/9) 6 0/Single/50 6 (//6) 6 00 Stainless steel 0~5 0~0 5~60 0~60 Max /Three/50 9 (/6/9) 6 8 0/Single/50 6 (//6) 6 *The environment must be frostfree. <Hydro box> Model name Type EHSCVMB EHSCVM6B EHSCYM9B only EHSCTM9B EHSCVM6EB EHSCYM9EB ERSCVMB and Cooling Expansion vessel Dimensions HWD Product weight (empty) kg Type of installation Wall mounted 0/Single/50 Heater Booster heater 0/Single/50 0/Single/50 6 (//6) 00/Three/50 9 (/6/9) 0/Three/50 9 (/6/9) 0/Single/50 6 (//6) 00/Three/50 9 (/6/9) 0/Single/50 Current Domestic hot water tank Volume (net) Material Breaker L Operating ambient condition* Target temperature range / Cooling Room temperature Flow temperature Cooling Cooling 0~5 0~5 0~5 0~5 0~0 5~60 0~5 0~5 0~5* N/ 5~5 DHW 0~60 Legionella prevention Max 70 Sound level (SPL) db () 8 * The environment must be frostfree. * Low outdoor temperature cooling is not allowed (minimum 0). Outdoor unit Model name Dimensions HWD Product weight (7/W5) Power input (/W5) Power input Sound level (SPL) Sound level (PWL) kg db () db () PUHZ SW0VH (BS) PUHZ SW50VH (BS) VH : 0/Single/ PUHZ PUHZ PUHZ SW75VH (BS) SW00V/YH (BS) SW0V/YH (BS) / / 0 PUHZ SHW80VH YH : 00/Three/ PUHZ SHWV/YH / Note: based on EN 5 (Circulation pump input is not included.). It may differ according to the system configuration. PUHZ SHW0YH PUHZ SHW0YK* * * PUHZSHW0YK can not be connected to ecodan indoor unit. * The performance data is obtained when plate heat exchanger (CH 700) are connected.

8 Optional parts <Indoor unit> Parts name Model name Specification Cylinder unit Wirelss remote controller Wirelss receiver s Iersion heater Joint pipe WiFi INTERFCE Contents PRWT50RE PRWR5RE PCSETSE PCTH0E PCTH0TKE PCTH0HTE PCIH0VE For room temp. For buffer and zone (flow and return temp.) For tank temp. For boiler (flow and return temp.) Ph PCSH0RJE PCSH50RJE PCWF00E For PUHZSW0/50VH (BS) ø9.5 For PUHZSW0/50VH (BS) ø5.88 ø6.5 ø.70 EHST0C VM6HB EHST0C YM9HB EHST0C TM9HB EHST0C VMB EHST0C VM6B EHST0C YM9B EHST0C VM6EB EHST0C YM9EB EHST0C VM6SB EHSC VMB EHSC VM6B EHSC YM9B EHSC TM9B VM6EB EHSC YM9EB EHSC ERSC VMB Hydro box <Outdoor unit> Parts name Model name Power inverter ZUBDN PUHZ PUHZ PUHZ PUHZ PUHZ PUHZ PUHZ PUHZ PUHZ SW0VH(BS) SW50VH(BS) SW75VH(BS) SW00V/YH(BS) SW0V/YH(BS) SHW80VH SHWV/YH SHW0YH SHW0YK * Connector for drain hose heater signal output PCSE60RE ir discharge guide PCSG58SGE PCSG59SGE PCSG96SGE ir protection guide PCSG56GE PCSH6GE PCSH95GE Drain socket PCSG6DSE PCSH7DSE Centralised drain pan PCSG6DPE PCSG6DPE Control/Service tool PCSK5ST * PUHZSHW0YK can not be connected to ecodan indoor unit. <Interface/Flow temperature controller> Parts name Model name Description Power inverter ZUBDN PUHZ PUHZ PUHZ PUHZ PUHZ PUHZ PUHZ PUHZ PUHZ SW0VH(BS) SW50VH(BS) SW75VH(BS) SW00V/YH(BS) SW0V/YH(BS) SHW80VH SHWV/YH SHW0YH SHW0YK step control interface PCIF00E* 0 s w/o case * * * * * * * * * PCIF0BE w/ case Flow temperature controllers PCIF00E* 0 s w/o case * * * * * * * * * PCIF0BE w/ case PCIF0BE w/ case System controllers PCIF05BE w/ case PCSIF05BE w/ case s PCTH0E * PCIF00E and PCIF00E are only for manufacturer s preloading. * PCTH0E is required. Parts name Model name Contents Q ty ir discharge guide PCSG58SGE ir discharge guide Support (For the upper and lower sides) Support (For right and left) ttachment screw (50) ttachment screw (0) Spacer 8 ir discharge guide ir protection guide Drain socket PCSG59SGE PCSG96SGE PCSG56GE PCSH6GE PCSH95GE PCSG6DSE PCSH7DSE ir discharge guide ttachment screw (55) Spacer ir discharge guide Support Screw () Washer Spring washer Front plate Side plate Side plate Connecting plate Mounting screw (0) Mounting screw () Washer (for screw ) ir guide Mounting screw () Washer Spring washer ir guide Mounting screw () Washer Spring washer Drain socket Drain cap (ø) Heat insulator Band Drain socket Drain cap (ø/ø) Heat insulator Band Parts name Model name Contents Q ty Centralised drain pan PCSG6DPE Centralised drain pan PCSG6DPE Centralised drain pan Control/Service tool step control interface Flow temperature controllers System controllers s PCSK5ST PCIF00E PCIF0BE PCIF00E PCIF0BE PCIF0BE PCIF05BE PCSIF05BE PCTH0E PCTH0HTE PCTH0TKE Control/Service Tool Remote controller Remote controller cable (5m) Remote controller Remote controller cable (5m) Remote controller Remote controller cable (0m) SD memory card Remote controller cable (0m) SD memory card for buffer and zone (flow and return temp.) for tank temp. for boiler (flow and return temp.) * One carton contains 0 s. * Two thermistors per package: 0 packages per carton * One thermistor per package: 0 packages per carton 0* 0* 0* 0* 0*

9 Packaged type specifications Indoor unit <Cylinder unit> Model name EHPT0XVMHB EHPT0XVM6HB EHPT0XYM9HB EHPT0XTM9HB EHPT0XVM6B EHPT0XYM9B Type only Iersion heater Expansion vessel Dimensions HWD Product weight (empty) kg Type of installation Floor standing 0/Single/50 Heater Booster heater 0/Single/50 0/Single/50 00/Three/50 0/Three/50 0/Single/50 00/Three/50 6 (//6) 9 (/6/9) 9 (/6/9) 6 (//6) 9 (/6/9) Current Breaker Iersion heater 0/Single/50 0/Single/50 0/Single/50 0/Single/50 Current Domestic hot water tank Volume (net) Material Breaker L Stainless steel Operating ambient condition* Target temperature range DHW Room temperature Flow temperature 0~5 0~0 5~60 0~60 Legionella prevention Max 70 Sound level (SPL) db () 8 *The environment must be frostfree. <Hydro box> Model name Dimensions Product weight (empty) Type of installation Heater Booster heater Domestic hot water tank Volume (net) Material Operating ambient condition* Target temperature range Room temperature Flow temperature DHW Legionella prevention Sound level (SPL) Type Expansion vessel HWD Current Breaker kg L db () EHPXVMB 9 0/Single/ EHPXVM6B only Wall mounted 0/Single/50 0/Single/50 6 (//6) 6 0~5 0~0 5~60 0~60 Max 70 8 EHPXYM9B 00/Three/50 9 (/6/9) 6 *The environment must be frostfree. Outdoor unit Model name PUHZ W50VH (BS) PUHZ W85VH (BS) PUHZ HWYH (BS) PUHZ HW0VH (BS) PUHZ HW0YH (BS) Dimensions HWD Product weight kg (7/W5) VH : 0/Single/50 YH : 00/Three/ (/W5) Power input Power input Sound level (SPL) db () Sound level (PWL) db () 6 66 Note: based on EN 5 (Circulation pump input is included.). It may differ according to the system configuration.

10 Optional parts <Indoor unit> Parts name Model name Specification Cylinder unit Wirelss remote controller PRWT50RE EHPT0X VMHB EHPT0X VM6HB EHPT0X YM9HB EHPT0X TM9HB EHPT0X VM6B EHPT0X YM9B EHPX VMB Hydro box EHPX VM6B EHPX YM9B Wirelss receiver PRWR5RE s PCSETSE For room temp. PCTH0E For buffer and zone (flow and return temp.) PCTH0TKE For tank temp. PCTH0HTE For boiler (flow and return temp.) Iersion heater PCIH0VE Ph EHPT accessories for UK PCWK0UKE WiFi INTERFCE PCWF00E <Outdoor unit> Parts name Model name Power inverter ZUBDN Connector for drain hose heater signal output PCSE60RE ir discharge guide PCSG59SGE ir protection guide PCSH6GE Drain socket PCSG6DSE Centralised drain pan PCSG6DPE PUHZ W50VH(BS) PUHZ W85VH(BS) PUHZ HWYH(BS) PUHZ HW0VH(BS) PUHZ HW0YH(BS) <Interface/Flow temperature control> Parts name Model name Description Power inverter ZUBDN step control interface PCIF00E* 0 s w/o case PCIF0BE w/ case Flow temperature controllers PCIF00E* 0 s w/o case PCIF0BE w/ case PCIF0BE w/ case System controllers PCIF05BE w/ case PCSIF05BE w/ case s PCTH0E * PCIF00E and PCIF00E are only for manufacturer s preloading. * PCTH0E is required. PUHZ W50VH(BS) * * PUHZ W85VH(BS) * * PUHZ HWYH(BS) * * PUHZ HW0VH(BS) * * PUHZ HW0YH(BS) * * Contents Parts name ir discharge guide ir protection guide Drain socket Centralised drain pan step control interface Flow temperature controllers Model name Contents Q ty Parts name Model name Contents Q ty PCSG59SGE ir discharge guide System controllers PCIF05BE ttachment screw (55) Spacer PCSH6GE ir guide Remote controller Mounting screw () Remote controller cable (0m) Washer SD memory card Spring washer PCSIF05BE PCSG6DSE Drain socket Drain cap (ø) 5 Heat insulator Remote controller cable (0m) Band 8 SD memory card PCSG6DPE Centralised drain pan s PCTH0E for buffer and zone (flow and return temp.) 0* PCIF00E PCIF0BE 0* PCTH0HTE PCTH0TKE for tank temp. for boiler (flow and return temp.) 0* 0* PCIF00E PCIF0BE PCIF0BE Remote controller Remote controller cable (5m) Remote controller Remote controller cable (5m) 0* * One carton contains 0 s. * Two thermistors per package: 0 packages per carton * One thermistor per package: 0 packages per carton

11 Mr.SLIM+ Using waste heat from air conditioners to heat water Mr. SLIM+ The smart air conditioning and hotwater supply system conceived from ecoconscious ideas INDOOR UNIT PLZRP7B PKRP7KL PCRP7K PCRP7H PSRP7K PEDRP7JQ PEDRP7JLQ ECODN IRTOWTER INDOOR UNIT OUTDOOR UNIT Hydro box Cylinder unit EHSCVMB EHSCVM6B EHSCYM9B EHSCTM9B EHSCVM6EB EHSCYM9EB EHST0CVMB EHST0CVM6B EHST0CYM9B EHST0CVM6EB EHST0CYM9EB EHST0CVM6SB EHST0CVM6HB EHST0CYM9HB EHST0CTM9HB PUHZFRP7VH *0 B generation split type models *Reversible model cannot be connected 5

12 More ecological Heat recovery function recycles waste heat from air conditioners ir conditioners normally exhaust hot air from the outdoor unit as waste heat in cooling operation. With Mr. SLIM+, however, the heat that is exhausted by conventional air conditioning systems is recycled and simultaneously transferred to the hotwater supply system, where it s used to heat water. In conventional systems, the airheat exchanger in the outdoor unit works as a condenser during air conditioning operation. The heat of the indoorair is transferred to the outsideair and exhausted as waste heat. The new circuit in Mr.SLIM+ uses a waterheat exchanger for supplying hot water as the condenser. When the air conditioning and hotwater systems are running at the same time, heat is recycled and used rather than being exhausted as waste heat. 7.0* attained at water temperature of 5 and standard air conditioning operation conditions Traditionally, when using a hotwater supply system where the airheat exchanger is in the outdoor unit, operation may not be possible when the outside temperature is very high. However, since Mr.SLIM+ uses the irtoir indoor unit for air conditioning operation and there s no heat exchange with outsideair, it s possible to use the hotwater supply system even if the ambient temperature is very high. Hotwater supply is possible (in heat recovery mode) even when the temperature outside is high (outside temperature = 6) *Conditions for irtoir coolong: Indoor 7 (dry bulb) / 9 (wet bulb) ; Outdoor 5 (dry bulb) *Water temperrature: 5 Space savings ir conditioning and hotwater supply in one system Installation space reduced Mr.SLIM+ utilizes an evolutionary in design that combines two original Mitsubishi Electric system technologies (i.e., irto ir and irtowater) using a single outdoor unit. Save on installation Mitsubishi Electric s legendary irtoir and irtowater systems have been integrated into a new configuration in which two systems share just one outdoor unit. The installation area required outside is cut in half, realizing a space savings of 50%. Save on construction Previously, two systems including two separate outdoor units were required. But the allnew Mr.SLIM+ simplifies everything into a single system configuration, improving reliability and quality by reducing installation time. That results in savings in both time and money, which are passed on to our customers. Conventional system Hybrid heat recovery system 6

13 Unit, Roles Total Comfort Yearround ir conditioning and hotwater supply matching the needs of each room llinone outdoor unit (air conditioning, hotwater supply and hotwater heating) Mr.SLIM for irtoir Mr.SLIM+ utilizes a duct system that enables the air conditioning or heating of multiple rooms, and other indoor unit type systems that is possible to fit various applications. ecodan for irtowater Hotwater supply (Domestic Hotwater supply) Hotwater heating for multiple rooms Mr.SLIM+ utilizes ecodan system that is possible to make Domestic Hotwater and to operate Hotwater heating. Various operations Mr.SLIM / ir to ir (ir Cooling) irtoir cooling using irtoir indoor unit Mr.SLIM / ir to ir (ir ) irtoir heating using irtoir indoor unit ecodan / ir to Water (Hotwater heating + DHW) irtowater operation using irtowater indoor unit Mr.SLIM + ecodan / ir to ir (ir Cooling) + DHW Heat recovery using both irtoir and irtowater indoor units 7

14 Specifications Indoor unit Outdoor unit PLZRP7B PUHZFRP7VH PKRP7KL PUHZFRP7VH PCRP7K PUHZFRP7VH PCRP7H PUHZFRP7VH PSRP7K PUHZFRP7VH PEDRP7JQ PUHZFRP7VH PEDRP7JLQ PUHZFRP7VH Refrigerant R0 * Power supply irtoir Cooling (T) Outdoor (V / Phase / Hz) Rated MinMax / Single / Total input EER Rated Design load (average season) nnual electricity consumption * SEER * Total input Energyefficiency class Rated MinMax Rated h/a Design load Declared capacity at reference design temperature at bivalent temperature.7.7 ( 0).7 ( 0).7.7 ( 0).7 ( 0).7.7 ( 0).7 ( 0).7.7 ( 0).7 ( 0).7.7 ( 0).7 ( 0).9.9 ( 0).9 ( 0).9.9 ( 0).9 ( 0) at operation limit temperature.5 ( 0).5 ( 0).5 ( 0).5 ( 0).5 ( 0).7 ( 0).7 ( 0) Backup heating capacity nnual electricity consumption * h/a,50,569,5,787,709,799,799 S * irtowater (TW) Energyefficiency class Nominal flow rate (for heating) *5 7W5 L/min Input W Input.65 Heat recovery (T cooling & TW) *6 W5 W (T cooling + TW) Input (T cooling + TW) Input TW indoor unit Cylinder unit or Hydro box (see previous page) Outdoor unit Dimensions HxWxD (+0) Weight kg ir volume Cooling Sound level (SPL) Cooling Heat recovery T TW Sound level (PWL) Cooling Heat recovery T TW Operating current (max) Breaker size Ext.piping Diameter Liquid/Gas Max.length OutIn Max.height OutIn Guaranteed operating range (outdoor) Cooling * TW Heat recovery m /min m /min db() db() db() db() db() db() db() db() m m / ~+6 0~+ 0~+5 +5~ / ~+6 0~+ 0~+5 +5~ / / / (for T) + 0 (for TW) 0 5~+6 0~+ 0~+5 0 5~+6 0~+ 0~+5 0 5~+6 0~+ 0~+5 +5~+6 +5~+6 +5~ / ~+6 0~+ 0~+5 +5~ / ~+6 0~+ 0~+5 +5~+6 * Refrigerant leakage contributes to climate change. Refrigerant with lower global warming potential (GWP) contributes less to global warming than a refrigerant with higher GWP if leaked to the atmosphere. This appliance contains a refrigerant fluid with a GWP equal to,975. This means that if kg of this refrigerant fluid leaked to the atmosphere, the impact on global warming would be,975 times higher than that of kg of CO over a period of 00 years. Never try to interfere with the refrigerant circuit yourself or disassemble the product yourself; always ask a professional. * Energy consumption based on standard test results. ctual energy consumption will depend on how the appliance is used and where it is located. * Optional air protection guide is required where ambient temperature is lower than 5. * SEER/S values are measured based on EN85. *5 ittowater values are measured based on EN5 (Circulation pump input is not included.). *6 Conditions for irtoir cooling: Indoor 7 (dry bulb) /9 (wet bulb); Outdoor 5 (dry bulb). 8