General overview. Pumps and systems for the segments Building Services, Water Management and Industry.

Transcription

1 General overview. Pumps and systems for the segments Building Services, Water Management and Industry. Delivery range 2011

2

3 Contents High-efficiency solutions from Wilo. from page 4 Worldwide. 3 Building Services from page 6 Pumps and pump systems for heating, air conditioning, cooling, pressure boosting, water supply and sewage disposal in domestic households, rented accommodation, administrative and commercial buildings. Water Management. from page 34 Pump and pump systems for water supply and sewage disposal and sewage treatment in municipal buildings. Industry from page 50 Pump and pump systems for cooling water and heating systems, raw water intake, water and fire-extinguishing water supply and for water purification and sewage disposal.

4 Worldwide. High-efficiency solutions from Wilo.

5 Production sites Germany Dortmund Oschersleben Hof Roth Minden France Chatou Laval Aubigny England King s Lynn London Ireland Limerick India Pune Kolhapur Calcutta China Beijing Qinghuangdao South Korea Gimhae USA Thomasville WILO SE, with headquarters in Dortmund, is one of the world's leading manufacturers of pumps and pump systems for heating, air conditioning and cooling technology, as well as for water supplies and sewage treatment and disposal. Founded in 1872 as Kupfer- und Messingwarenfabrik Louis Opländer, the company has almost 70 branches worldwide and over 6,000 employees. Turnover amounted to 926 million EUR in International recognition has increased rapidly since the company became a European limited liability company (SE) in Wilo pumps and systems set global standards for efficiency and technical performance: with high-efficiency solutions for all applications in the segments. 5 Building Services Water Management. Industry

6 Building Services Pumps and pump systems for heating, air conditioning, cooling, pressure boosting, water supply and sewage disposal in domestic households, rented accommodation, administrative and commercial buildings. Porsche Museum, Stuttgart, Germany High-efficiency heating and warm-water supply. The Task: The high-efficiency Wilo standard, already well established in the plants and production facilities of Porsche is set to feature in the Porsche museum as well. The Solution: The supply of heating and water to the entire museum shall come solely by means of Wilo Stratos high-efficiency pumps and needsbased and energy-saving in-line pumps from Wilo.

7 Heating, air-conditioning, cooling. Wilo-Stratos high-efficiency pump. The first high-efficiency pump for heating, air-conditioning and cooling worldwide. Pressure boosting. Wilo pressure boosting systems with Helix high-pressure multistage centrifugal pumps. Constant pressure at every level. Sewage disposal. Wilo-DrainLift M, L Full-value and connection-ready faeces lifting unit for detached and semi-detached houses. Skyper-Hochhaus, Frankfurt/Main, Germany. Intelligent pressure boosting. The Task: Needs-based, energy-efficient potable water supply with high pressure for more than 38 floors and a height of up to 153 metres. The Solution: Pressure boosting systems from Wilo ensure intelligent water supply with the highest technological standards. Ostseeresidenz Heringsdorf, Insel Usedom, Germany. Effective sewage management. The Task: Disposal of a range of sewage from a total of 15 hotels, villas and residences, including underground garages, swimming pools and wellness zones, fitness areas, restaurant and a brewery. The Solution: The resource-friendly use of rain water coupled with the extremely effective and reliable handling of all sewage only uses Wilo pumps and heating systems. Highest efficiency at the lowest life cycle costs. The economic supply to buildings increasingly demands the use of innovative systems from optimally configured components. Whether in a detached or semidetached home, industrial, commercial or public buildings, hospitals or hotels: Wilo convinces everyone with its high-efficiency pumps and systems for heating systems, air conditioning, water supply and sewage disposal. Many processes within Facility Management can be controlled and regulated by building automation systems conveniently. Wilo high-efficiency pumps and Wilo pump systems with electronic controls offer the best technological foundations anywhere in the market. They are at home in any system and can be integrated optimally into building automation. They offer exceptional possibilities for saving on power and upkeep costs. An investment, that will soon be offset and more than pay for itself in the long run. 7

8 Wilo Online catalogue. All pumps for the Building Services segment at a glance.

9 Product overview. Building Services Heating, air-conditioning, cooling from page 10 Pumps, pump systems and accessories for heating, air-conditioning and secondary hot water. > High-efficiency-, energy-saving and standard pumps in glandless and glanded pump versions > Pump regulators and controls, modules for building automation and switchgears > Lifting units for condensates 9 from page 19 Pumps, pump systems and accessories for > Rainwater utilisation > Domestic water supply > Commercial water supply and pressure boosting > Fire-extinguishing water supply > Raw water intake Drainage and sewage from page 27 Pumps, pump systems and accessories for > Wastewater collection and transport > Drainage > Pressure drainage

10 APPLIES TO EUROPEAN DIRECTIVE FOR ENERGY RELATED PRODUCTS APPLIES TO EUROPEAN DIRECTIVE FOR ENERGY RELATED PRODUCTS Building Services Heating, air-conditioning, cooling Heating, air-conditioning, cooling Heating, air-conditioning, cooling Glandless high-efficiency pumps Wilo-Stratos PICO Glandless high-efficiency pumps Wilo-Stratos Wilo-Stratos-D Glandless automatic pumps Wilo-Smart Wilo-Smart A Glandless circulation pump with screwed connection, blocking-current proof synchronous motor according to ECM technology and built-in electronic performance control for variable differential pressure control. With maximum efficiencies and high starting torque, including automatic deblocking function. All hot water heating systems, airconditioning applications, industrial circulation systems. 4 m³/h 6.0 m Fluid temperature +2 C to +110 C Mains connection 1~230 V, 50 Hz Protection class IP 44 Threaded connection Rp ½, Rp 1 and Rp 1¼ Max. operating pressure 10 bar Glandless circulation pump with threaded connection or flange connection, EC motor and automatic power adjustment. Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems 61 m³/h 13 m Perm. temperature range -10 C to +110 C Mains connection 1~230 V, 50 Hz Protection class IP 44 Nominal diameter Rp 1 to DN 100 Max. operating pressure screw-end pumps 10 bar Flange-end pumps 6/10 bar / 6 bar (special version: 10 bar or 16 bar) Glandless circulation pump with threaded connection and automatic power adjustment Hot-water heating systems of all kinds and industrial circulation systems 3.5 m³/h 6 m Perm. temperature range +2 C to +95 C Mains connection 1~230 V, 50 Hz Protection class IP 42 Nominal width Rp 1 Max. operating pressure 10 bar Control mode: Δp-v and Δp-c Automatic setback operation Automatic bleeding function Automatic deblocking function Red-button technology for simple operation Display indication of current power consumption in W and accumulated electricity consumption in kwh Blocking current-proof motor Particle filter Quick electrical connection with Wilo- Connector Options: -- with bronze pump housing for use in underfloor heating systems, --Versions with short port-to-port length 130 mm Energy efficiency class A High-efficiency pump especially for single and two-family houses, as well as for two to six-family houses. Up to 90% electricity savings compared to old uncontrolled heating pumps Only 3 watts min. power consumption Very high starting torque for reliable starting Integrated motor protection Bleeding routine for automatic bleeding of the rotor chamber Building Services catalogue, Heating, Air-Conditioning, Cooling EC motor Pre-selectable control modes p-c, p-v, p-t Automatic setback operation for additional savings potential Dual pump management Red-button technology for simple operation Graphical pump display with rotating display Remote control via infrared interface (IR-Module/IR-Monitor) Integrated motor protection System expansion by means of retrofittable interface modules for communication: Modbus, BACnet, CAN, LON, PLR etc. Pump housing with cataphoretic coating Combination flanges PN 6/PN 10 (for DN 32 to DN 65) Thermal insulation shells as standard for heating applications Energy efficiency class A Up to 80 % electricity savings over circulation pumps without speed control Highest degrees of efficiency due to ECM technology Building Services catalogue, Heating, Air-Conditioning, Cooling Automatic load adjustment Red-button technology for easy operation Blocking current-proof motor Quick connection with spring clips Energy efficiency class A (Smart A) Up to 70% electricity savings compared to uncontrolled heating pumps (Smart A) Automatic control function Building Services catalogue, Heating, Air-Conditioning, Cooling

11 Building Services Heating, air-conditioning, cooling Heating, air-conditioning, cooling Heating, air-conditioning, cooling Heating, air-conditioning, cooling Glandless standard pumps Wilo-Star-RS Wilo-Star-RSD Glandless standard pumps Wilo-TOP-S Wilo-TOP-SD Glandless standard pumps Wilo-TOP-RL Glandless standard pumps Wilo-TOP-D Glandless circulation pump with threaded connection. Preselectable speed stages for power adjustment Glandless circulation pump with threaded connection or flange connection. Glandless circulation pump with threaded connection or flange connection. Glandless circulation pump with threaded connection or flange connection and fixed speed 11 Hot-water heating systems of all kinds, industrial circulation systems, cold water systems and air-conditioning systems 5.8 m³/h Hot-water heating systems of all kinds, industrial circulation systems, cold water systems and air-conditioning systems 75 m³/h Hot-water heating systems of all kinds, industrial circulation systems, cold-water systems and air-conditioning systems 10 m³/h Hot-water heating systems of all kinds, industrial circulation systems, cold water systems and air-conditioning systems 75 m³/h 7.8 m Perm. temperature range -10 C to +110 C Mains connection 1~230 V, 50 Hz Protection class IP 44 Nominal diameter Rp ½, Rp 1 or Rp 1½ Max. operating pressure 10 bar 19 m Perm. temperature range -20 C to +130 C In short-term operation (2 h) up to +140 C For use with Wilo-Protect-Module-C: -20 C to +110 C Mains connection: --1~230 V, 50 Hz (depending on type) --3~400 V, 50 Hz --3~230 V, 50 Hz (with optional switching plug) Protection class IP 44 Nominal diameter Rp 1 to DN 100 Max. operating pressure screw-end pumps flange-end pumps 6/10 bar or 6 bar (special version: 10 bar or 16 bar) 7.5 m Perm. temperature range -20 C to +130 C Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz Protection class IP 44 Nominal width Rp 1 to DN 40 Max. operating pressure screw-end pumps 10 bar flange-end pumps 6/10 bar or 6 bar (special version: 10 bar or 16 bar) 2.9 m Perm. temperature range -20 C to +130 C In short-term operation (2 h) up to +140 C Mains connection 1~230 V, 50 Hz, with condenser 3~400 V, 50 Hz, 3~230 V, 50 Hz Protection class IP 44 Nominal diameter Rp 1¼ to DN 125 Max. operating pressure screw-end pumps 10 bar flange-end pumps 6/10 bar or 6 bar (special version: 10 bar or 16 bar) Three manually selectable speed stages Wrench attachment point on pump housing Blocking-current proof motor, motor protection not required Cable lead-in on both sides for simple installation Quick connection with spring clips RSD version as double pump Preselectable speed stages for power adjustment Combination flange PN 6/PN 10 (DN 40 to DN 65) Pump housing with cataphoretic coating Thermal insulation shells as standard for heating applications Extendable motor protection, signal and display functions Cable lead-in on both sides for easy installation Pre-selectable speed stages for power control Combination flanges PN 6/PN 10 (DN 40) Pump housing with cataphoretic coating Blocking current-proof motor or full motor protection Pump housing with cataphoretic coating Combination flanges PN 6/PN 10 (DN 40 to DN 65) Thermal insulation shells as standard for heating applications Suitable for any installation position with horizontal shaft; terminal box in o'clock positions 3 pre-selectable speed stages for load adjustment Pump communication in simple and safe retrofit plug-in technology Easy installation due to combination flanges up to nominal diameter DN 65 Pre-selectable speed stages for manual power adjustment For the commercial area: for systems with low pipework resistances Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling

12 Building Services Heating, air-conditioning, cooling Heating, air-conditioning, cooling Heating, air-conditioning, cooling Glanded high-efficiency pumps in in-line design Wilo Stratos GIGA NEW Glanded energy-saving pumps in in-line design Wilo-VeroLine-IP-E Wilo-VeroTwin-DP-E extension Glanded energy-saving pumps in in-line design Wilo-CronoLine-IL-E Wilo-CronoTwin-DL-E High-efficiency inline pump with EC motor and electronic duty adaptation in glanded construction. Version as singlestage low-pressure centrifugal pump with flange connection and mechanical shaft seal. Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems. Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems 35 m³/h 52 m Permitted temperature range of the fluid -20 C to +140 C Mains connection: 3~400 V (±10 %), 50/60 Hz; 3~380 V (-5 %/+10 %), 50/60 Hz Protection class IP 55 Max. operating pressure 16 bar to +120 C, 13 bar to +140 C Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection Lantern Coupling EC motor with electronic power adjustment Materials: Pump housing and lantern: EN-GJL-250 Impeller: PPS-GF40 Shaft: Mechanical seal: AQ1EGG Other mechanical seals: on request Innovative high-efficiency pump for the highest overall degrees of efficiency based on a new Wilo glanded design High-efficiency EC motor (degrees of efficiency above IE4 limit values acc. to IEC TS Ed.1) New hydraulics optimally adapted to the EC motor technology Integrated electronic power adjustment Extremely compact and space-saving design Simple operation by tried-and-tested red-button technology and display Various control modes Δp-c, Δp-v, PID and n-const. (control mode) Control range up to three times greater than in conventional electronically controlled pumps Analogue interfaces 0-10 V, 2-10 V, 0-20 ma, 4-20 ma Optional interfaces for bus communication using plug-in IF-Modules Integrated dual-pump management with efficiency-optimised peak-load cut-in Building Services catalogue, Heating, Air-Conditioning, Cooling We are continually adding to this series. 170 m³/h 30 m Permissible temperature range -20 C to +120 C Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz Protection class IP 55 Nominal diameter DN 32 to DN 80 Max. operating pressure 10 bar (special version: 16 bar) Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection Motor with integrated electronic speed control DP-E with switchover valve Materials: Pump housing and lantern: EN-GJL-250 Impeller: PPO-GF30 Shaft: Mechanical seal: AQEGG Other mechanical seals: on request High-efficiency motors as standard; from 0.75 kw nominal motor power: motors with IE2 technology Energy savings due to integrated electronic power control Simple operation with red-button technology and display Various control modes Δp-c, Δp-v, PID and n-const. (control mode) Analogue interfaces 0-10 V, 2-10 V, 0-20 ma, 4-20 ma Optional interfaces for bus communication using plug-in IF-Modules Integrated dual pump management Integrated full motor protection (PTC thermistor sensor) with trip electronics Building Services catalogue, Heating, Air-Conditioning, Cooling 680 m³/h 65 m Permissible temperature range -20 C to +140 C Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz Protection class IP 55 Nominal diameter DN 40 to DN 80 Max. operating pressure 16 bar Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection Lantern Coupling Engine with integrated electronic power adjustment DL-E with switchover valve Materials: Pump housing and lantern: EN-GJL-250 Impeller: Standard version: EN-GJL-200 special version: G-CuSn 10 Shaft: Mechanical seal: AQEGG Other mechanical seals: on request Motors with IE2 technology for higher efficiency fitted as standard Energy savings due to integrated electronic power control Simple operation with red-button technology and display Various control modes Δp-c, Δp-v, PID and n-const. (control mode) Analogue interfaces 0-10 V, 2-10 V, 0-20 ma, 4-20 ma Optional interfaces for bus communication using plug-in IF-Modules Integrated dual pump management Integrated full motor protection (PTC thermistor sensor) with trip electronics Building Services catalogue, Heating, Air-Conditioning, Cooling

13 Building Services Heating, air-conditioning, cooling Heating, air-conditioning, cooling Heating, air-conditioning, cooling Heating, air-conditioning, cooling Glanded standard pumps in in-line design Wilo-VeroLine-IPL Wilo-VeroTwin-DPL Glanded standard pumps in in-line design Wilo-CronoLine-IL Wilo-CronoTwin-DL Special glanded pumps in in-line design Wilo-VeroLine IPH-W Wilo-VeroLine IPH-O Special glanded pumps in in-line design Wilo-VeroLine-IPS Glanded pump in in-line design with threaded connection or flange connection Glanded pump in in-line design with flange connection Glanded pump in in-line design with flange connection Glanded pump in in-line design with threaded connection or flange connection For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems IPH-W: For pumping hot water without abrasive matter in closed industrial circulation systems, district heating, closed heating systems, etc. IPH-O: For pumping heat transfer oil in closed industrial circulation systems 80 m³/h For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems m³/h m³/h 13 m³/h 52 m Perm. temperature range -20 C to +120 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter Rp 1 to DN 100 Max. operating pressure 10 bar (special version: 16 bar) 110 m Perm. temperature range -20 C to +140 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter DN 32 to DN 250 Max. operating pressure 16 bar (25 bar on request) 38 m Permissible temperature range IPH-W: -10 C to +210 C (at a max. of 23 bar) Permissible temperature range IPH-O: -10 C to +350 C (at a max. 9 bar) Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter DN 20 to DN 80 3 m Perm. temperature range -10 C to +140 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter Rp 1, DN 40 and DN 50 Max. operating pressure 10 bar or 6 bar for flange connection Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal For flange connection with pressure measuring connection R 1/8 Motor with one-piece shaft DPL with switchover valve Materials: Pump housing and lantern: EN-GJL-250 Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type) Shaft: Mechanical seal: AQEGG; other mechanical seals on request Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection with pressure measuring connection R 1/8 Lantern Coupling IEC standard motor DL with switchover valve Materials: Pump housing and lantern: Standard version: EN-GJL-250 Optional: Spheroidal cast iron EN-GJS LT Impeller: Standard: EN-GJL200 Special version: Red brass G-CuSn 10 Shaft: Mechanical seal: AQEGG Other mechanical seals: on request Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection Lantern Motor with special shaft Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal or stuffing box Threaded or flange connection with pressure measuring connection R 1/8 Standard motor Materials: Pump housing and lantern: EN-GJL-200 Impeller: Plastic Shaft: Mechanical seal: BVEGG Other mechanical seals on request High-efficiency motors as standard; from 0.75 kw nominal motor power: motors with IE2 technology Standard condensate drainage holes in the motor housings and lanterns version: Motor with one-piece shaft Version N: Standard motor B5 or V1 with stainless steel plug shaft Bidirectional mechanical seal with forced flushing Easy to install due to feet with threaded holes on pump housing High-efficiency motors as standard; from 0.75 kw nominal motor power: motors with IE2 technology Reduced life cycle costs due to optimised efficiency Standard condensate drainage holes in the motor housings Can be used flexibly in air-conditioning and cooling systems, with application benefits due direct draining of condensate via optimised lantern design (patented) Bidirectional mechanical seal with forced flushing High worldwide availability of standard motors (according to Wilo specifications) and standard mechanical seals Easy to install due to feet with threaded holes on pump housing Motors with IE2 technology for higher efficiency fitted as standard Bidirectional, self-cooled mechanical seal Great variety of applications by a large fluid temperature range without additional wearing parts Worldwide availability of the standard motors used Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling

14 Building Services Heating, air-conditioning, cooling Heating, air-conditioning, cooling Heating, air-conditioning, cooling Heating, air-conditioning, cooling Glanded monobloc pumps Wilo CronoBloc BL Glanded monobloc pumps Wilo-BAC Standard glanded pumps Wilo-CronoNorm NL Wilo-VeroNorm-NPG System separation for underfloor heating Wilo-Safe Glanded pump in monobloc design with flange connection Glanded pump in monobloc design with threaded connection or Victaulic connection Single-stage low-pressure centrifugal pump with axial suction, in accordance with EN 733 and ISO 5199, mounted on baseplate. Pumping clean or slightly contaminated water (max. 20 ppm) without solid matter for circulation, transfer and pressure boosting purposes. For pumping heating water in accordance with VDI 2035, water/ glycol mixtures, cooling/cold water and process water. For applications in municipal water supply, irrigation, building services, industry, power stations etc. Wilo-Safe: Complete system/basic device for hydraulic separation of floor heating systems For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems. For pumping water-glycol mixtures with 20 to 40 % Wilo-Safe: Floor heating systems of all kinds, system separation for oxygen-rich fluids 360 m³/h 80 m³/h 3,000 m³/h 105 m Perm. temperature range -20 C to +140 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter DN 32 to DN 150 Max. operating pressure 16 bar (25 bar on request) 25 m Perm. temperature range -15 C to +60 C Mains connection 3~400 V, 50 Hz Protection class IP 54 Nominal diameter G2/G 1½ (only BAC 40 ) or Victaulic connection 60.3/48.3 mm (BAC 40 ) 73.0/73.0 mm (BAC 70 ) Max. operating pressure 6 bar 140 m Perm. temperature range -20 C to +140 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter on suction side DN 50 to DN 500 Nominal diameter on pressure side DN 32 to DN 500 Maximum operating pressure: depending on type and application up to 16 bar Wilo-Safe: Max. operating pressure 6 bar Perm. temperature range +20 C to +90 C Mains connection 1~230 V, 50 Hz Heat exchanger 5-24 kw Single-stage low-pressure centrifugal pump in block design, with axial suction port and radially arranged pressure port with Mechanical seal Flange connection with pressure measuring connection R 1/8 Lantern Coupling IEC standard motor Single-stage low-pressure centrifugal pump in monobloc design, with axial suction port and radially arranged pressure port Materials Pump housing: PA % GF Impeller: PA/PPO, fibreglass-reinforced Shaft: X30Cr13 Mechanical seal: BQEGG Single-stage low-pressure centrifugal pump in monobloc design with coupling, coupling protection, motor and baseplate Mechanical seal or stuffing box Wilo factory motor or ATB motor Materials: Pump housing: EN-GJL-250 Impeller: EN-GJL-250 Shaft: Wilo-Safe The complete system is ready-mounted and pressure-checked Materials Pump housing standard: EN-GJL-250 Optional: EN-GJS Impeller (standard): EN-GJL-200 Special version: Bronze G-CuSn10 Shaft: Mechanical seal: AQEGG other mechanical seals on request High-efficiency motors as standard; from 0.75 kw nominal motor power motors with IE2 technology Meets user requirements due to performance and main dimensions in accordance with EN 733 Long motor life due to standard condensate drainage holes in the motor housing Corrosion protection due to cataphoretic coating Reduced life cycle costs due to optimised efficiency Pump housing in plastic design Version with Victaulic or threaded connection (BAC 70/ with Victaulic connection only) High-efficiency motors as standard; from 0.75 kw nominal motor power motors with IE2 technology Other materials and versions on request Special versions on request (apart from Wilo-Safe) Building Services catalogue, Heating, Air-Conditioning, Cooling

15 Building Services Heating, air-conditioning, cooling Heating, air-conditioning, cooling Heating, air-conditioning, cooling extension Condensate lifting units Wilo-DrainLift Con Wilo-DrainLift Con Plus Control devices Wilo-CC-HVAC system Wilo-CRn system Wilo-VR-HVAC system Pump control IR-Module, IR-Monitor Wilo-IF-Module Stratos/Wilo-IF-Module Wilo-Protect-Module-C Wilo-Control AnaConWilo-Control DigiCon/DigiCon-A Automatic condensate lifting unit For pumping condensate out of Heat generators with condensing boiler technology Air conditioning and cooling systems (e.g. refrigerators, refrigerated display cases and evaporators) Switchgears for controlling 1 to 6 pumps Wilo-Control products for connecting pumps to the building automation m³/h 5.4 m Mains connection 1~230 V, 50 Hz Operating mode S3 Fluid temperature max. 65 C, (for short periods 80 C) Protection class IP 20 Pressure port 10 mm Inlet connections 19/30 mm Gross tank volume 1.2 l (2 l) Ready-to-plug system Level control with float switch Alarm signal via potential-free contact (NC contact/no contact) Integrated non-return valve Fixation material 5 m pressure hose Wilo-CC-HVAC System Comfort control system for 1 to 6 pumps switched in parallel, with fixed speed Wilo-CRn system Comfort control system for 1 to 6 pumps switched in parallel, with integrated speed control Wilo-VR-HVAC System Vario controller for 1 to 4 pumps switched in parallel, with integrated speed control IR-Module, IR-Monitor Remote control with infrared interface for electronically controlled Wilo pumps Wilo-IF-Modules Stratos/IF-Modules Plug-in module for BA connection of Stratos, Stratos GIGA, IP-E, DP-E, IL-E/ DL-E, MHIE, MVIE, Helix VE... Wilo-Protect-Module-C Plug-in module for building automation control of TOP-S/SD pumps without speed control Wilo-Control AnaCon and DigiCon/ DigiCon-A Analogue and digital interface converter for connecting pumps to the building automation Low-noise operation ( 43 db[a]) 2/4 inlet openings Standard alarm contact (NC/NO contact) Easy to install Motor unit reversible by 180 (Con) Variable inlets/drains Suitable for condensates with a ph value 2.4 Special versions on request Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling

16 Building Services Solar thermal Solar thermal Geothermal energy systems Secondary hot water Glandless high-efficiency pumps Wilo-Stratos-ECO-ST Glandless standard pumps Wilo-Star-ST Glandless standard pumps Wilo-Star-RSG Glandless high-efficiency pumps Wilo-Star-Z NOVA Glandless circulation pump with threaded connection, EC motor and automatic power adjustment Circulation in solar heating systems Glandless circulation pump with threaded connection. Preselectable speed stages for power adjustment Circulation in solar heating systems Glandless circulation pump with threaded connection. Preselectable speed stages for power adjustment Circulation in geothermal systems Glandless circulation pump with threaded connection and blocking-current proof synchronous motor Secondary hot water circulation systems and similar systems in industrial and building services 0.4 m³/h 2.5 m³/h 4 m³/h 5.5 m³/h 5 m Perm. temperature range +15 C to +110 C Mains connection 1~230 V, 50 Hz Protection class IP 44 Nominal diameter Rp 1 Max. operating pressure 10 bar 12 m Perm. temperature range -10 C to +110 C In short-term operation (2 h) up to +120 C Mains connection 1~230 V, 50 Hz Protection class IP 44 Nominal diameter Rp ½ and Rp 1 Max. operating pressure 10 bar 8.5 m Perm. temperature range -10 C to +110 C Mains connection 1~230 V, 50 Hz Protection class IP 44 Nominal diameter Rp 1 and Rp 1¼ Max. operating pressure 10 bar 0.9 m Fluid temperature: Potable water up to 3.56 mmol/l (20 d): max. +65 C, in short-term operation (2 h) up to +70 C Mains connection 1~230 V, 50 Hz Protection class IP 42 Threaded connection Rp ½ Max. operating pressure 10 bar EC motor Control modes p-v and p-c Automatic setback operation for additional savings potential Red-button technology for simple operation Blocking current-proof motor Cable lead-in on both sides for easy installation Quick connection with spring clips Connection for building automation (BA) Pump housing with cataphoretic coating for external corrosion protection Three manually selectable speed stages Wrench attachment point on pump housing Blocking-current proof motor, motor protection not required Cable lead-in on both sides for simple installation Quick connection with spring clips for easy electrical connection Pump housing with cataphoretic coating for external corrosion protection Three manually selectable speed stages Wrench attachment point on pump housing Blocking-current proof motor, motor protection not required Cable lead-in on both sides for simple installation Quick connection with spring clips Pump housing with cataphoretic coating Quick electrical connection with Wilo- Connector Blocking current-proof motor Integrated ball shut-off valve on the suction side (Star-Z NOVA A, Star-Z- NOVA C only) Integrated non-return valve on the pressure side (Star-Z NOVA A, Star-Z- NOVA C only) Including digital plug-in time switch (Star-Z NOVA C only) Including 1.8 m connecting cable with shock-proof plug (Star-Z NOVA C only) Including thermal insulation Class A motor technology Up to 80 % electricity savings over circulation pumps without speed control Highest degrees of efficiency due to ECM technology Min. electronic power consumption only 5.8 W 3 times higher starting torque than conventional circulation pumps Special hydraulics for applications in solar thermal systems Up to 30% less current consumption due to class B motor technology Special hydraulics for use in geothermal systems Extremely low power consumption: 2 to 4.5 Watt due to new synchronous motor Materials of the highest quality: with stainless steel impeller. This results in a top hygiene standard, durability and reliable protection against corrosion. Extended field of application for calcareous water: up to 20 dh Flexible service motor: Fast replacement of all common pump types Quick and convenient electrical connection with no tools required thanks to Wilo-Connector Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling

17 Building Services Secondary hot water Secondary hot water Secondary hot water Secondary hot water Glandless high-efficiency pumps Wilo-Stratos-ECO-Z Wilo-Stratos-ECO-Z BMS Glandless high-efficiency pumps Wilo-Stratos-Z Wilo-Stratos-ZD Glandless standard pumps Wilo-Star-Z Wilo-Star-ZD Glandless standard pumps Wilo-TOP-Z Glandless circulation pump with threaded connection and automatic power adjustment Secondary hot water circulation systems and similar systems in industrial and building services 2.5 m³/h Glandless circulation pump with threaded connection and automatic power adjustment Secondary hot water circulation systems and similar systems in industrial and building services 41 m³/h Glandless circulation pump with threaded connection Glandless circulation pump with threaded connection Secondary hot water circulation systems and similar systems in industrial and building services 5.5 m³/h Secondary hot water circulation systems and similar systems in industrial and building services 65 m³/h 17 5 m Fluid temperature of secondary hot water up to a water hardness of 3.2 mmol/l (18 d) max. +65 C In short-term operation (2 h) up to +70 C Heating water: +15 C to +110 C Mains connection 1~230 V, 50 Hz Protection class IP 44 Nominal diameter Rp 1 Max. operating pressure 10 bar 12 m Perm. temperature range of secondary hot water up to water hardness of 3.56 mmol/l (20 d) max. +80 C Heating water -10 C to +110 C Mains connection 1~230 V, 50 Hz Protection class IP 44 Nominal diameter Rp 1 to DN 50 Max. operating pressure screw-end pumps 10 bar flange pumps 6/10 bar 6.0 m Fluid temperature secondary hot water up to water hardness 3.2 mmol/l (18 d) max. +65 C in short-term operation (2 h) up to +70 C Heating water -10 C up to +110 C (not Star-Z 15 TT) Mains connection 1~230 V, 50 Hz or for Star-Z 25/2 DM 3~400 V, 50 Hz Protection class IP 44 (IP 42 for Star-Z 15 TT) Nominal diameter Rp ½, Rp 1 Max. operating pressure 10 bar 9 m Perm. temperature range of secondary hot water up to a water hardness of 3.56 mmol/l (20 d) max. +80 C Heating water -10 C to +110 C Mains connection: --1~230 V, 50 Hz (depending on type) --3~400 V, 50 Hz --3~230 V, 50 Hz (with optional switching plug) Protection class IP 44 Nominal diameter Rp 1 to DN 50 Max. operating pressure screw-end pumps 10 bar Flange pumps 6/10 bar EC motor Control mode p-v (BMS versions p-v and p-c) Automatic setback operation for additional savings potential Red-button technology for simple operation Blocking current-proof motor Cable lead-in on both sides for easy installation Quick connection with spring clips Thermal insulation shell EC motor Pre-selectable control modes p-c, p-v, p-t Pre-selectable speed for constant operation Automatic setback operation for additional savings potential Dual pump management Red-button technology for simple operation Graphical pump display with rotating display Remote control via infrared interface (IR-Module/IR-Monitor) Integrated motor protection System extension due to retrofit communication modules LON, CAN, PLR, etc. Combination flanges PN 6/PN 10 (for DN 40 and DN 50) Thermal insulation shells as standard for heating applications Constant speed or for Star-Z 25/6, 20/4, 20/5, 20/7 three selectable speed stages Blocking-current proof motor, motor protection not required Quick connection with spring clips Thermal insulation as standard for Star Z 15 TT. Star-Z 15 TT with integrated timer and thermostat, LC display with symbolic language, red button technology and automatic detection of the thermal disinfection of the warm secondary hot water tank, as well as ball shut-off valve on the suction side and non-return valve on the pressure side. Star-ZD version as double pump Pre-selectable speed stages Thermal insulation as standard All plastic parts that come into contact with the fluid fulfil KTW recommendations Combination flange PN 6/PN 10 (DN 40 to DN 65) Extendable motor protection, signal and display functions Full motor protection Cable feed into terminal box possible on both sides (starting from P1 250 W) with integrated strain relief Corrosion-resistant pump housing made of red brass for systems where oxygen entry is possible 3 times higher starting torque than conventional circulation pumps All plastic parts that come into contact with the fluid fulfil KTW recommendations Min. electronic power consumption only 5.8 W Up to 80 % over circulation pumps without speed control Highest degrees of efficiency due to ECM technology Corrosion-resistant pump housing made of red brass All plastic parts that come into contact with the fluid fulfil KTW recommendations Pump communication in simple and safely retrofit plug-in technology Easy installation due to combination flange, nominal diameter DN 40 to DN 65 Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling

18 Building Services Secondary hot water Glanded special pumps Wilo-VeroLine IP-Z Glanded circulation pump in in-line design with threaded connection For pumping potable water, cold and hot water (in accordance with VDI 2035) without abrasive substances, in heating, cold water and cooling water systems 5 m³/h 4.5 m Perm. temperature range of secondary hot water up to a water hardness of 4.99 mmol/l (28 d) max. +65 In short-term operation (2 h) up to +110 C Heating water -8 C to +110 C Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz Protection class IP 44 Nominal diameter Rp 1 Max. operating pressure 10 bar Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Threaded connection Motor with one-piece shaft High resistance to corrosive fluids due to stainless steel housing and Noryl impeller Wide range of applications due to suitability for water with hardness values up to 5 mmol/l (28 dh) All plastic parts that come into contact with the fluid fulfil KTW recommendations Building Services catalogue, Heating, Air-Conditioning, Cooling

19 Building Services Rainwater utilisation systems Wilo-RainSystem AF Basic Wilo-RainSystem AF Comfort Rainwater utilisation systems Wilo-RainSystem AF 150 Rainwater utilisation systems Wilo-RainSystem AF 400 Rainwater utilisation system Wilo-RainCollector II RWN Ready-to-plug rainwater utilisation system Automatic rainwater utilisation system with 2 self-priming pumps Automatic rainwater utilisation system with run-down tank container and 2 non self-priming pumps Hybrid system for commercial and industrial rainwater utilisation for saving potable water in conjunction with cisterns or tanks 16 m³/h Ready-to-plug rainwater utilisation system with rainwater tank Rainwater utilisation for saving potable water in conjunction with cisterns or tanks Rainwater utilisation in multi-family houses and small trade businesses for saving potable water in conjunction with cisterns or tanks 12 m³/h Rainwater utilisation for saving potable water 19 5 m³/h 4 m³/h 52 m Mains connection 1~230 V, 50 Hz Suction head max. 8 m Fluid temperature max. +5 C to +35 C Operating pressure max. 8 bar Replenishment reservoir 11 l Protection class IP m Mains connection 1~230 V, 50 Hz Suction head max. 8 m Fluid temperature max. +5 C to +35 C Operating pressure max. 8 bar Replenishment reservoir 150 l Protection class IP m Mains connection 3~400 V, 50 Hz Fluid temperature max. +5 C to +35 C Operating pressure max. 10 bar Replenishment reservoir 400 l Protection class IP m Mains connection 1~230 V, 50 Hz Fluid temperature max. +5 C to +35 C Operating pressure max. 6 bar Replenishment reservoir 1,500 l Protection class IP 54 Connection-ready module with compact construction Fully connected electrically and hydraulically Mounted on a non-corroding base frame 1 MultiCargo MC centrifugal pump (self-priming) Pressure-side pipework R 1 Water replenishment reservoir (11 l) with float valve 1.8/3.0 m connection cable and mains plug Switchgear Rain Control Basic RCB/ Economy RCE with control electronics monitoring rainwater storage levels Connection for overflow warning Connection-ready module with compact construction Fully connected electrically and hydraulically Mounted on vibration-insulated painted steel tubular frames 2 centrifugal pumps MultiCargo MC (self-priming) Joint tubing R 1 ½" on the pressure side, inc. transmitter unit, diaphragm pressure vessel, shut-off device Pressure gauge 0-10 bar Ball valve on suction and pressure sides Water replenishment reservoir (150 l) with float valve RainControl Professional central switchgear with control electronics, level sensor Menu-based operation and display Cyclical pump cycling and test run when pump at rest Automatic fault-actuated switchover and peak-load cut-in Automatic water exchange in the replenishment reservoir, prevents lime deposits Permanent display of rainwater storage level, system pressure and operating status Connection-ready module with compact construction Fully connected electrically and hydraulically Mounted on vibration-insulated baseplate 2 MultiPress MP centrifugal pumps (non-self-priming) Joint tubing R 1½" on the pressure side, inc. transmitter unit, diaphragm pressure vessel, shut-off device Pressure gauge 0-10 bar Ball valve on suction and pressure sides and non-return valve High-volume hybrid tank with all connections, calmed inlets and overflow with siphon RainControl Hybrid central switchgear with control electronics Signals concerning operation and faults Cyclical pump cycling and test run when pump at rest Automatic fault-actuated switchover and peak-load cut-in Automatic water exchange in the replenishment reservoir Permanent display of rainwater storage tank level, system pressure, operating status (optional) 1 centrifugal pump MultiCargo MC (self-priming) Electronic pump control with Wilo- FluidControl Connection cable with plug 1500 litre storage tank made of polyethylene Make-up funnel Dome cover Protection against low water level Flexible connection on pressure side 4 transport carrying handles Other versions, additionally with Automatic water replenishment Sable set Overflow protection when installed under backflow level Extension kits can be retrofitted at any time. Compact, ready-to-plug rainwater utilisation system Low-noise, due to multistage centrifugal pump and complete encapsulation of the system (AF Comfort) Fulfilment of DIN 1988 and EN 1717 High economic efficiency due to fresh water replenishment according to requirements Flow- and noise-optimised replenishment reservoir All parts that come in contact with the fluid are corrosion-free For AF Comfort: automatic support function for evacuation of air from the suction line Low-noise due to multistage centrifugal pumps All parts that come in contact with the fluid are corrosion-free Maximum operational safety due to fully electronic RainControl Professional controller High economic efficiency due to fresh water replenishment according to requirements High reliability due to DVGW-certified, flow-optimised and noise-optimised replenishment reservoir Low-noise due to multistage centrifugal pumps All parts that come in contact with the fluid are corrosion-free Maximum operational reliability, due to trendsetting fully electronic RainControl Hybrid controller High economic efficiency due to fresh water replenishment according to requirements High reliability, due to flow- and noiseoptimised overall concept Automatic control of the feeding pump System/level control in the low-voltage range Low-noise, self-priming pump ensures almost noiseless system operation Corrosion-free Can be expanded at any time Multi-tank system with replenishment and setting zone for better water quality (Wilo MKS system) Greatest possible connection flexibility, due to rotating rainwater inlet

20 Building Services Self-priming multistage pumps and pump systems Wilo-Jet WJ Wilo-Jet HWJ Wilo-Jet FWJ Self-priming multistage pumps and pump systems Wilo-MultiCargo MC Wilo-MultiCargo HMC Wilo-MultiCargo FMC Self-priming multistage pumps and pump systems Wilo-MultiPress MP Wilo-MultiPress HMP Wilo-MultiPress FMP Cistern pumps Wilo-Sub TWI 5/TWI 5-SE Wilo-Sub TWI 5-SE P&P Self-priming multistage centrifugal pumps Self-priming multistage centrifugal pumps Non-self-priming multistage centrifugal pumps Submersible pumps For pumping water from wells for filling, pumping empty, transferring by pumping, irrigation and sprinkling. As emergency pump for overflows For domestic water supply, sprinkling, irrigation, spraying and rainwater utilisation For domestic water supply, sprinkling, irrigation, spraying and rainwater utilisation For domestic water supply from wells, cisterns and tanks. For irrigation, sprinkling, rainwater utilisation or for pumping out water 5 m³/h 7 m³/h 8 m³/h 16 m³/h 50 m 57 m 57 m 88 m Mains connection 1~230 V, 50 Hz 3~400 V, 50 Hz Inlet pressure max. 1 bar Fluid temperature max. +5 C to +35 C Operating pressure max. 6 bar Protection class IP 44 Suction/pressure side connections: --WJ (G 1/G 1) --FWJ (G 1/R 1) --HWJ (G 1/Rp 1) Mains connection 1~230 V, 50 Hz 3~400 V, 50 Hz Inlet pressure max. 4 bar Fluid temperature max. +5 C to +35 C Ambient temperature max. +40 C Operating pressure max. 8 bar Protection class IP 54 Suction/pressure side connections: --MC (Rp 1/Rp 1) --FMC (R 1/Rp 1) --HMC (Rp 1/Rp 1) Mains connection 1~230 V, 50 Hz 3~400 V, 50 Hz Inlet pressure max. 6 bar Fluid temperature max. +5 C to +35 C Ambient temperature max. +40 C Operating pressure max. 10 bar Protection class IP 54 Suction/pressure side connections: --MP 3.. Rp 1 (Rp 1); MP 6.. Rp 1¼/Rp 1 --FMP 3.. R 1/Rp 1; FMP 6.. R 1¼/Rp 1 --HMP 3.. Rp 1/Rp 1; HMP 6.. Rp 1¼/Rp 1 Mains connection 1~230 V, 50 Hz 3~400 V, 50 Hz Fluid temperature max. +3 C to +40 C Operating pressure max. 10 bar Protection class IP 68 Connection on pressure side Rp 1¼ Connection on suction side for SE version Rp 1¼ With or without carrying frame, depending on the version (WJ, FWJ) For single-phase AC motor (1~230 V) --Connection cable with plug --On/Off switch Thermal motor protection switch Directly flanged motor Thermal motor protection switch for single-phase AC motor (1~230 V) Directly flanged motor Thermal motor protection switch for 1~230 V version Connection cable, 20 m TWI 5 version with standard inlet basket Variants --SE: with lateral inlet connecting piece --FS: with built-in float switch Thermal motor protection for EM version (1~230 V) Version TWI 5-SE Plug & Pump additionally with --pressure and flow controller Wilo-Fluidcontrol --On-/Off switch --Floating suction fine filter incl. suction hose Ideal for portable outdoor applications (hobby, garden) HWJ version with diaphragm pressure vessel and pressure switch FWJ version with fluid control for system control Low-noise Ideal as a base-load pump for rainwater utilisation HMC version with diaphragm pressure vessel and pressure switch FMC version with fluid control for system control Low-noise Ideal as a base-load pump for rainwater utilisation HMP version with diaphragm pressure vessel and pressure switch FMP version with fluid control for system control Ready-to-plug in EM version (1~230 V) Pump (housing, stages, impellers) made entirely of stainless steel (AISI 304) Self-cooling motor Installation possible outside water Thermal motor protection for EM version (1~230 V)

21 Building Services Multi-pump pressure boosting system Wilo-Economy COE-2 TWI 5 Horizontal, multistage centrifugal pumps Wilo-Economy MHI Horizontal, multistage centrifugal pumps Wilo-Economy MHIE Vertical, multistage centrifugal pumps Wilo-Multivert MVIS Submersible pumps (suitable to be used outside water) Non-self-priming multistage pump Non-self-priming multistage pump with integrated frequency converter Non-self-priming multistage pump with glandless pump motor Pressure boosting and water supply in the domestic area as well as for small commercial installations where a compact construction and a low noise level are required. 16 m³/h and pressure boosting Commerce and industry Cooling water circulation systems Washing and sprinkling systems and pressure boosting Industrial circulation systems Process engineering Cooling water circulation systems Washing and sprinkling systems and pressure boosting m³/h 30 m³/h 14 m³/h 65 m Fluid temperature +3 to +40 C Operating pressure max. 10 bar Inlet pressure max. 6 bar Protection class IP m Fluid temperature -15 to +110 C Operating pressure max. 10 bar Inlet pressure max. 6 bar Protection class IP m Fluid temperature -15 to +110 C Operating pressure max. 10 bar Inlet pressure max. 6 bar Protection class IP m Fluid temperature -15 to +50 C Operating pressure 16 bar Inlet pressure 6 bar Protection class IP 54 Inlet and outlet collecting pipes Ball shut-off valves on the suction and pressure side Non-return valve on the pressure side 1 pressure gauge 2 pressure switches BC switchgear Stainless steel pump in monobloc design Threaded connection Single-phase or three-phase AC motor Single-phase AC motor with integrated thermal motor protection Stainless steel in monobloc design Threaded connection Integrated frequency converter Single-phase or three-phase AC motor Three-phase version with red-button technology and LCD display for state indication Integrated thermal motor protection Stainless steel pump in in-line design Three-phase AC motor in glandless pump design Pumps of the TWI 5 series with low noise level (51-61 db(a)) 2-pump pressure boosting system in compact construction because of the vertical pump construction Economical system, based on the basic functions of the BC switchgear Pumps and pipes in stainless steel (AISI 304) All parts that come in contact with the fluid are made of stainless steel (AISI 304) or (AISI 316) Compact design All relevant components have KTW and WRAS approval Easy commissioning All parts that come in contact with the fluid are made of stainless steel (AISI 304) or (AISI 316L) Compact design Integrated frequency converter Full motor protection All relevant components have KTW and WRAS approval Low-noise (up to 20 db(a) quieter than conventional pumps) All parts that come in contact with the fluid are corrosion-resistant Glandless pump technology All relevant components have KTW and WRAS approval

22 Building Services extension extension modification Vertical, multistage centrifugal pumps Wilo-Multivert MVISE Vertical, multistage centrifugal pumps Wilo-Helix-V Vertical, multistage centrifugal pumps Wilo-Helix-VE Vertical, multistage centrifugal pumps Wilo-Multivert MVI Non-self-priming multistage pump with glandless pump motor and integrated frequency converter Non-self-priming multistage pump Non-self-priming multistage pump with integrated frequency converter Non-self-priming multistage pump and pressure boosting and pressure boosting Industrial circulation systems Process water Cooling water circulation systems Fire extinguishing systems Washing systems Irrigation and pressure boosting Industrial circulation systems Process water Cooling water circulation systems Washing systems Irrigation and pressure boosting Fire extinguishing systems Boiler feed Industrial circulation systems Process engineering Cooling water circulation systems Washing and sprinkling systems 14 m³/h 80 m³/h 45 m³/h 155 m³/h 110 m Fluid temperature -15 to +50 C Operating pressure 16 bar Inlet pressure 6 bar Protection class IP 44 Emitted interference in compliance with EN Interference resistance in compliance with EN m Fluid temperature -30 to +120 C Operating pressure max. 16/25 bar Inlet pressure max. 10 bar Protection class IP 55 PN 16 and PN 25 with loose round flanges 234 m Fluid temperature -20 to +120 C Operating pressure max. 16/25 bar Inlet pressure max. 10 bar Protection class IP 55 PN 16 and PN 25 with loose round flanges 240 m Fluid temperature -15 to +120 C Operating pressure max. 16/25 bar Inlet pressure max. 10 bar Protection class IP 55 Stainless steel pump in in-line design Glandless pump Self-venting Hydraulics in Oval flange, round flange Three-phase AC motor with integrated frequency converter, with red-button technology and LCD display for state indication Integrated thermal motor protection Protection against low water level Impellers, stage chambers and pump housing stainless steel / (AISI304L/AISI316L) Versions with 1.44xx stainless steel designed for aggressive fluids Versions --PN16 with oval flanges and PN25 with round DIN flanges --Helix V22, 32, 52 PN16 and PN25 with round loose flanges in accordance with ISO 2531 and ISO 7005 IE2/IEC standard three-phase AC motor Impellers, stage chambers and pump housing stainless steel / (AISI304L/AISI316L) Versions with 1.44xx stainless steel designed for aggressive fluids PN16 and PN25 versions with round loose flanges in accordance with ISO 2531 and ISO 7005 IE2/IEC standard three-phase AC motor Integrated frequency converter Stainless steel pump in in-line design Versions --MVI 1.. up to PN16 with oval flanges and PN25 with round DIN flanges --MVI 16.. to 95.. PN16/PN25 with round DIN flanges --Victaulic connections (PN25) depending on pump type IE2/IEC standard three phase motor, 2-pole, AC or DC version. Single-phase AC motor with integrated thermal motor protection Easy commissioning Glandless pump technology Low-noise (up to 20 db(a) quieter than conventional pumps) Integrated frequency converter All components that come in contact with the fluid are made of stainless steel (AISI 304) All relevant components have KTW and WRAS approval Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid MVI All parts that come in contact with the fluid made of stainless steel (AISI 304) or (AISI 316L) MVI 1600 MVI 9500 depending on pump type in stainless steel (AISI 316L) or (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating All relevant components have KTW and WRAS approval

23 Building Services extension: COR-1 MVIE 32../ COR Helix VE -GE Vertical, multistage centrifugal pumps Wilo-Multivert-MVIE Single-pump pressure boosting system with system separation Wilo-Economy CO/T-1 MVI /ER Single-pump pressure boosting systems Wilo-Economy CO-1 MVIS /ER Wilo-Economy CO-1 MVI /ER Wilo-Economy CO-1 Helix-V /CE Single-pump pressure boosting systems with speed-controlled pump Wilo-Comfort-N-Vario COR-1 MVISE Wilo-Comfort-Vario COR-1 MVIE Wilo-Comfort-Vario COR-1 Helix-VE Non-self-priming multistage pump with integrated frequency converter systems with system separation and a non-self-priming, highpressure multistage centrifugal pump Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump with integrated speed control For fully automatic water supply in inlet mode from the public water supply network or from a break tank For pumping potable water, process water, cooling water, water for firefighting or other service water and pressure boosting Industrial circulation systems Process engineering Cooling water circulation systems Washing and sprinkling systems For fully automatic water supply in inlet mode from the public water supply network For pumping potable water and process water, cooling water, water for firefighting or other service water For fully automatic water supply in inlet mode from the public water supply network or from a break tank For pumping potable water, process water, cooling water, water for firefighting or other service water m³/h 8 m³/h 135 m³/h 97 m³/h 245 m Fluid temperature -15 to +120 C Operating pressure max. 16 bar/25 bar Inlet pressure max. 6 bar Protection class IP 54 or IP m Mains connection 3~230 V / 400 V, 50 Hz (other versions on request) Fluid temperature max. 50 C Operating pressure 16 bar Inlet pressure 6 bar Protection class IP m Mains connection 3~230 V / 400 V, 50 Hz (other versions on request) Fluid temperature max. 50 C Operating pressure 16 bar Inlet pressure 6 bar Switching pressure stages 6 / 10 / 16 bar Protection class IP m Mains connection 3~400 V, 50 Hz Fluid temperature max. 50 C Operating pressure 16 bar Inlet pressure 6 bar Protection class IP 44 Stainless steel pump in in-line design PN16 with oval flanges PN16/25 with DIN round flanges, Victaulic connections depending on pump type Single-phase or three-phase current standard motor Integrated frequency converter Integrated thermal motor protection Protection against low water level 1 pump of MVI series PE preliminary tank, atmospherically ventilated (120 l) Components that come in contact with fluid are corrosion-resistant Pipework in stainless steel Check valve, on pressure side Non-return valve, on pressure side Preliminary tank including float valve and float switch Diaphragm pressure vessel 8 l, PN 16, on pressure side Low-water cut-out switchgear 1 pump of the MVIS, MVI or Helix-V series Components that come in contact with fluid are corrosion-resistant Base frame made of stainless steel with height-adjustable vibration damper for insulation against structureborne noise Pipework in stainless steel Check valve, on pressure side Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side 1 pump of the MVIE, Helix-VE or MVISE series with integrated frequency converter All parts that come in contact with the fluid are corrosion-resistant Pipework in stainless steel Check valve, on pressure side Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16 Easy commissioning Full motor protection Large control range MVI All parts that come in contact with the fluid made of stainless steel (AISI 304) or (AISI 316L) MVI 1600 MVI 9500 depending on pump type in stainless steel (AISI 316L) or (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating All relevant components have KTW and WRAS approval Compact system, ready for connection, for all applications that require system separation Operationally reliable due to the combination of the MVI pump series with the ER-1 control unit For systems with MVIS pump Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump Up to 20 db (A) quieter than conventional systems with comparable hydraulic output Operationally reliable due to the combination with the ER-1 control device For systems with Helix-V pump IE2 standard motors Efficiency-optimised, laser-welded 2D/3D hydraulics User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance Operationally reliable due to the combination CE control device For systems with MVISE pump Virtually noiseless system due to the use of glandless, stainless steel, highpressure, multistage centrifugal pumps with integrated frequency converter Up to 20 db[a] quieter than conventional systems with comparable hydraulic output For systems with Helix-VE pump IE2 standard motors Efficiency-optimised, laser-welded 2D/3D hydraulics User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance

24 Building Services modification modification extension: COR2-4 MVIE 32../52.. COR2-4 Helix VE /VR Multi-pump pressure boosting systems Wilo-Economy CO 2-4 MHI /ER Wilo-Comfort-N-CO 2-6 MVIS /CC Wilo-Comfort-CO 2-6 MVI /CC Wilo-Comfort-CO 2-6 Helix-V /CC Multi-pump pressure boosting systems with speed control Wilo-Comfort-N-COR 2-6 MVIS /CC Wilo-Comfort-COR 2-6 MVI /CC Wilo-Comfort-COR2-6 Helix-V /CC Multi-pump pressure boosting systems with speed controlled pumps Wilo-Comfort-Vario-COR 2-4 MHIE /VR Wilo-Comfort-N-Vario-COR 2-4 MVISE /VR Wilo-Comfort-Vario-COR 2-4 MVIE /VR Wilo-Comfort-Vario COR2-4 Helix-VE Multi-pump pressure boosting systems Wilo-FLA Pressure boosting system with 2 to 6 non-self-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel Pressure boosting system with speed control and 2 to 6 non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel Pressure boosting system with 2 to 4 non-self-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel, with integrated speed control For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems For pumping potable water and process water, cooling water, water for firefighting or other service water Pressure boosting system for fire extinguisher applications with 1 to 2 autonomous working, non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel For supply of fire extinguisher water from fire hose reels according to DIN from 04/2009 For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems For pumping potable water and process water, cooling water, water for firefighting or other service water For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems For pumping potable water and process water, cooling water, water for firefighting or other service water 800 m³/h 800 m³/h 560 m³/h 80 m³/h 160 m Mains connection 3~230 V / 400 V, 50 Hz Fluid temperature max. 50 C Operating pressure 10 bar or 16 bar Inlet pressure 6 bar Protection class IP m Mains connection 3~230 / 400 V, 50 Hz Fluid temperature max. 50 C Operating pressure 16 bar Inlet pressure 6 bar Protection class IP m Mains connection 3~400 V, 50 / 60 Hz, depending on type also 1~230 V, 50/60 Hz Fluid temperature max. 70 C Operating pressure 10 bar Inlet pressure 6 bar Protection class IP m Mains connection 3~230/400 V, 50 Hz Fluid temperature max. 50 C Max. operating pressure 16 bar Inlet pressure 6 bar Protection class IP 54 2 to 4 or 2 to 6 pumps per system Components that come in contact with fluid are corrosion-resistant Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise Pipework in stainless steel Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side Pressure sensor, on discharge side 2 to 6 pumps per system Continuous control operation of the base-load pump via frequency converter integrated in the CC controller Components that come in contact with fluid are corrosion-resistant Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise Pipework in stainless steel Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side Pressure sensor, on discharge side 2 to 4 pumps per system Continuous control operation due to pumps with integrated frequency converters Components that come in contact with fluid are corrosion-resistant Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise Pipework in stainless steel Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side Pressure sensor, on discharge side 1 to 2 pumps per system Components that come in contact with fluid are corrosion-resistant Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise Pipework in stainless steel Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side Pressure sensor, on discharge side Comes as standard with pump protection by means of minimum volume acceptance via bypass switch without auxiliary energy. Compact system in accordance with the requirements of DIN to 4 or 2 to 6 high-pressure, multistage centrifugal pumps switched in parallel Easily adjustable and operationally reliable due to integrated control devices with Helix-V with IE2 motors For systems with MVIS pumps Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump Up to 20 db (A) quieter than conventional systems with comparable hydraulic output Easy-to-use system in accordance with all requirements of DIN to 6 vertical high-pressure multistage centrifugal pumps switched in parallel Speed-controlled base-load pump with Helix-V with IE2 motors For systems with MVIS pumps Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump Up to 20 db (A) quieter than conventional systems with comparable hydraulic output Compact system with excellent value for money due high-pressure, multistage centrifugal pumps with integrated frequency converters Superproportionally large control range Integrated full motor protection via PTC Integrated dry-running detection with automatic cut-out in event of low water via performance characteristics of the motor control electronics with Helix-V with IE2 motors For systems with MVISE pumps Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump Up to 20 db (A) quieter than conventional systems with comparable hydraulic output Compact system in accordance with all requirements of DIN or 2 high-pressure multistage centrifugal pumps Helix V series with IE2 motors Variants --Single-pump system --Twin-pump system with two independent single-pump systems in a base frame Comes as standard with pump protection by means of minimum volume acceptance via bypass switch without auxiliary energy. Documentation on request

25 Building Services modification Submersible pumps Wilo-Sub TWU 3 Submersible pumps Wilo-Sub TWU 4 Wilo-Sub TWU 4 -QC Wilo-Sub TWU 4 Submersible pump system Wilo-Sub TWU 3 Plug & Pump Wilo-Sub TWU 4 Plug & Pump Submersible pumps Wilo-Sub TWU 6 Wilo-Sub TWU 8 Submersible pump, multistage Submersible pump, multistage Water-supply unit with submersible pump, control and complete accessories. Submersible pump, multistage from boreholes, wells and rainwater storage tanks; domestic water supply, sprinkling and irrigation; for pumping water without long-fibre and abrasive constituents geothermal applications from boreholes, wells and rainwater storage tanks; sprinkling, irrigation and pressure boosting; lowering the water level; for pumping water without long-fibre and abrasive constituents geothermal applications Water-supply unit for water supply from boreholes, wells and cisterns; domestic water supply, sprinkling and irrigation; for pumping water without long-fibre and abrasive constituents from boreholes and cisterns; sprinkling and irrigation; for lowering the water level; for pumping water without long-fibre and abrasive constituents 25 3 m³/h 24 m³/h 6 m³/h 132 m³/h 130 m Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Immersed operating mode: S1 Fluid temperature: 3-40 C Minimum motor flow: 0.08 m/s Max. sand content: 40 g/m³ Max. number of starts: 20/h Max. immersion depth: 60 m Protection class: IP 58 Pressure port: Rp m Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Immersed operating mode: S1 Fluid temperature: 3-30 C or 3-40 C Min. flow at motor: 0.08 m/s Max. sand content: 50 g/m³ Up to 20 starts per hour Max. immersion depth: 200 m 88 m Mains connection: 1~230 V, 50 Hz Immersed operating mode: S1 Fluid temperature: 3-30 C or 3-40 C Min. flow at motor: 0.08 m/s Max. sand content: --TWU 3- : 40 g/m³ --TWU 4- : 50 g/m³ Up to 20 starts per hour Max. immersion depth: --TWU 3- : 60 m --TWU 4- : 200 m Protection class: --TWU 3- : IP 58 --TWU 4- : IP m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Fluid temperature: 3-30 C Min. flow at motor: 0.16 m/s (4" motors = 0.08 m/s) Max. sand content: 50 g/m³ Up to 20 starts per hour Max. immersion depth: --TWU 6 = 250 m --TWU 8 = 350 m Multistage submersible pump with radial impellers Integrated non-return valve NEMA coupling Single-phase or three-phase motor Integrated thermal motor protection for single-phase motor Multistage submersible pump with radial or semi-axial impellers Integrated non-return valve NEMA coupling Single-phase or three-phase motor Integrated thermal motor protection for single-phase motor Hermetically cast motors Multistage submersible pump with radial impellers Integrated non-return valve NEMA coupling Single-phase motor Integrated thermal motor protection Dry-running protection system (only for TWU 4- -P&P with Wilo-Sub-I package) Immersible, multistage submersible pump Radial or semi-axial impellers Integrated non-return valve NEMA coupling Three-phase motor Hermetically cast motors Rewindable motor Integrated non-return valve Parts that come in contact with fluids are corrosion-free Pump connection head and flange made of stainless steel Vertical and horizontal installation possible Single-phase version with starting capacitor and On/Off switch Integrated non-return valve Parts that come in contact with fluids are corrosion-free Vertical and horizontal installation possible Low-wearing due to floating impellers Quick and easy extension of motor cable, without dismantling the pump (TWU QC) Electrical system components already prewired Easy installation and operation Integrated non-return valve Impellers made of bronze Integrated non-return valve Immersion depth up to 350 m Vertical and horizontal installation possible

26 Building Services extension Submersible pumps Wilo-Sub TWI 4 Wilo-Sub TWI 6 Wilo-Sub TWI 8 Wilo-Sub TWI 10 Sprinkler pumps with VdS approval Wilo-EMU sprinkler pumps Submersible pump, multistage Sprinkler pump in sectional design Water and potable water supply from boreholes and cisterns; process water supply; municipal and industrial water supply; sprinkling and irrigation; pressure boosting; lowering the water level; for pumping water without long-fibre and abrasive constituents For supplying sprinkler systems 165 m³/h 500 m Mains connection: 1~230 V, 50 Hz (only TWI 4 ) or 3~400 V, 50 Hz Immersed operating mode: S1 Fluid temperature: 3-20 C or 3-30 C Min. flow at motor: m/s Max. sand content: 50 g/m³ Up to 10 or 20 starts per hour Max. immersion depth: m 580 m³/h 140 m Mains connection: 3~400 V/50 Hz Immersed operating mode: S1 Max. fluid temperature: 25 C, higher temperatures on request Min. flow at motor: 0.1 m/s Max. sand content: 35 g/m³ Up to 10 starts per hour Max. immersion depth: --NU 611 = 100 m --Other motors = 300 m Multistage submersible pump with radial or semi-axial impellers Integrated non-return valve NEMA coupling AC-(only TWI 4) or three phase motor Hermetically sealed or rewindable (TWI 6 / TWI 8 / TWI 10...) motors Immersible, multistage submersible pump Radial or semi-axial impellers NEMA coupling (depending on type) Three-phase motor for direct or stardelta start. Rewindable motors Unit made completely of stainless steel Integrated non-return valve Vertical and horizontal installation possible Standard and configurable versions available (TWI 6 / TWI 8 / TWI 10...) Star-delta version Rewindable motors VdS certification Certified non-return valve available as accessory Version in bronze material Pressure shroud installation possible Vertical and horizontal installation possible

27 Building Services Submersible drainage pumps Wilo-Drain TM/TMW/TMR 32 Wilo-Drain TS/TSW 32 Submersible drainage pumps Wilo-Drain TS 40 Wilo-Drain TS 50 Wilo-Drain TS 65 Submersible drainage pumps Wilo-EMU KS Self-priming drainage pumps Wilo-Drain LP Wilo-Drain LPC Basement drainage pump Submersible drainage pumps Submersible drainage pumps in rugged design for use on building sites Dry-mounted and self-priming drainage pumps For pumping clear or slightly muddy water From tanks, sumps or pits For overflows and flooding For draining basement stairways and basement areas From domestic areas (washing machine water, soapsuds) From small fountains, waterworks or streams For pumping wastewater with foreign matter of max. ø 10 mm for House/site drainage Environmental and water treatment technology Industrial and process engineering For drainage of excavation pits, cellar areas, pits and basins. Ideally suited for applications in fountains For pumping wastewater with small amounts of solid matter for Excavation pits and ponds Sprinkling / spraying of gardens and green areas Drainage of seepage water Mobile drainage m³/h 53 m³/h 340 m³/h 71 m³/h 12 m Mains connection 1~230 V, 50 Hz Protection class IP 68 Max. submersion depth TM/TMW = 3m, TS/TSW = 10m Fluid temperature 3 C to 35 C, for short periods up to 3 min. max. 90 C Cable length 3 to 10 m, depending on type Free ball passage 10 mm Pressure port Rp 1¼, hose connection 35 mm (TM 32/...), 32 mm (R1) for TS/ TSW 25 m Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz Protection class IP 68 Submersion depth 5 to 10 m Fluid temperature 3 C to 35 C Free ball passage 10 mm Pressure port, depending on type Rp 1½, Rp 2 or Rp 2½ 71 m Operating mode S1 Max. fluid temperature 40 C Protection class IP 68 Sealed by double mechanical seal Maintenance-free roller bearing 29 m Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz Fluid temperature 3 C to 35 C Free ball passage, depending on type 5 to 12 mm Connection Rp 1½ to G3 Ready-to-plug Motor monitoring via temperature Sheath current cooling Connection cable Hose connection Turbulator (TMW, TSW) Float switch (depending on type) Non-return valve enclosed (depending on type) Ready-to-plug versions also with float switch Thermal motor monitoring Explosion protection for TS 50 and TS 65 Connection cable 10 m Connection cable detachable Integrated non-return valve for TS 40 Hose connection for TS 40 Mechanical seal independent of direction of rotation Heavy-duty motors (oil-filled and dry) ensure permanent operation even with non-immersed motor Corrosion-resistant components Portable self-priming centrifugal pump TMW, TSW with turbulator for constantly clean pump sump No fluid-related odour formation Easy installation High operational reliability Easy operation Inox & composite Low weight Detachable connection cable Detachable float switch for model A Thermal motor monitoring for AC motor without switchgear Modular material system: Normal cast iron version Wear protection due to ceramic coating Pump components made of Abrasite (chilled cast iron) With Ex protection, depending on type High operational reliability Easy handling Easy operation Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage

28 Building Services Submersible drainage pumps Wilo-Drain TMT Wilo-Drain TMC Pedestal pumps Wilo-Drain VC Submersible sewage pumps with macerator Wilo-Drain MTC Wilo-Drain MTS Submersible sewage pumps Wilo-Drain TC 40 Submersible drainage pumps Vertical drainage pumps Submersible sewage pumps with macerator For pumping sewage containing faeces and municipal and industrial sewage, including fibrous matter for pressure drainage, house and site drainage, sewage and water management and environmental and water treatment technology 17 m³/h Submersible sewage pump For industrial applications, e.g. for condensate, hot water and aggressive fluids. For pumping wastewater/fluids up to 95 C From pump sumps With condensate From basements at risk of flooding For pumping heavily contaminated fluids for house/site drainage, sewage (not within the scope of DIN EN ) and water management and environmental and water treatment technology 22 m³/h 17 m³/h 22 m³/h 13 m Mains connection 3~400 V, 50 Hz Protection class IP 68 Submersion depth max. 5 m Fluid temperature 95 C, 65 C non-immersed Cable length 10 m Free ball passage 10 mm Pressure port, depending on type Rp 1¼ or Rp 1½ 20 m Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz Protection class IP 54 Fluid temperature +5 C to +95 C Free ball passage 5 or 7 mm, depending on type Pressure port, depending on type Rp 1 or Rp 1½ 55 m Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Immersed operating mode: S1 / S3 25% (depending on type) Insulation class: F Thermal winding monitoring Max. fluid temperature: 3 40 C 10 m Mains connection: 1~230 V, 50 Hz Immersed operating mode: S1, S3 25% Insulation class: B Thermal winding monitoring Max. fluid temperature: 3 40 C Free ball passage: 35 m Max. immersion depth: 5 m Pump housing and impeller made of grey cast iron, bronze or stainless steel, depending on version Attached float switch Capacitor box (VC 32, 1~ ) Heavy-duty version made of cast iron Unimpeded flow to the impeller Maceration of substances being pumped Simple installation via suspension unit or pump base Attached float switch (only model A) Ready-to-plug Including float switch Thermal motor monitoring MTC: External macerator MTS: Innovative patented macerator Internal rotating blade Spherically formed macerator Pulling cut (shearing cut) High temperature resistance Also suitable for aggressive fluids Long service life Easy commissioning Connection outside the fluid Long downtimes possible Integrated motor protection due to thermal relay and control electrode Submersible Oil barrier chamber High degree of efficiency Mechanical seal on pump side made of solid silicon carbide material External hardened macerator (MTC) Internal, spherically formed macerator (MTS) Longitudinally watertight cable Version with Ex protection (depending on type) Submersible Heavy-duty hydraulic housing made of cast iron Easy operation due to the attached float switch Integrated stainless steel pump base for easy installation Free ball passage: 40 m Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage

29 Building Services modification modification extension Submersible sewage pumps Wilo-Drain STS 40 Wilo-Drain STS 65 Submersible sewage pumps Wilo-Drain TP 50 Wilo-Drain TP 65 Submersible sewage pumps Wilo-EMU FA 05 to FA 15 Submersible sewage pumps Wilo-Drain TP 80 Wilo-Drain TP 100 Wilo-Drain TP...-AM Submersible sewage pumps Submersible sewage pumps Submersible sewage pumps Submersible sewage pump for industrial applications For pumping heavily contaminated fluids, for environmental and water treatment technology and industrial and process engineering For pumping heavily contaminated fluids containing faeces (STS 65 ), for house and site drainage, sewage (not within the scope of DIN EN ) and water treatment technology and industrial and process engineering For pumping heavily contaminated fluids, for house and site drainage, sewage (not within the scope of DIN EN ) and water management, environmental and water treatment technology and industrial and process engineering For pumping sewage with solid constituents in water treatment systems and pumping stations; local drainage, water control and process water extraction; applications in construction and industry m³/h 60 m³/h 103 m³/h 180 m³/h 22 m Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Immersed operating mode: S1, S3 25% Surfaced operating mode STS 65 : S2-8 min or S1 in CS version Insulation class: --STS 40 : B --STS 65 : F Thermal winding monitoring Max. fluid temperature: 3 40 C Free ball passage: 40 or 65 mm Max. immersion depth: 5 10 m 21 m Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Immersed operating mode: S1, S3 25% Insulation class: F Thermal winding monitoring Max. fluid temperature: 35 C Free ball passage: 44 m Max. immersion depth: 10 m 51 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Surfaced operating mode: S2-15 or S2-30 (depending on type) Thermal motor monitoring Insulation class: F Max. fluid temperature: 40 C Free ball passage of 35 to 100 mm Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m 21 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1, S3 25% Surfaced operating mode: S1, S3 25% Insulation class: F Thermal winding monitoring Sealing chamber control Max. fluid temperature: 40 C Free ball passage: 80 or 100 mm Max. immersion depth: 20 m AC variant ready-to-plug A-model including float switch Thermal motor monitoring CS version with cooling jacket for dry well installation AC variant with capacitor box A-model including float switch and plug Thermal motor monitoring ATEX approval (TP 65 3~ without float) Heavy-duty version made of cast iron Simple installation via suspension unit or pump base Thermal motor monitoring Sealing chamber monitoring ATEX approval (not for model "AM") Sheath current cooling Model "AM" with float switch, CEE plug and transport frame Submersible Connection cable detachable Dry motor, stainless steel version Attached float switch (A-model) enables easy operation Integrated pump base (STS 40) for easy installation Free ball passage: mm STS 65 with connection to a discharge pipeline DN 80 complies with DIN EN No switchgear needed for thermal fuse protection (STS 40...) Integrated thermal motor protection (1~/3~) and phase failure protection (3~) for STS 40 Longitudinally watertight cable version (STS 65F ) ATEX approval (STS 65F ) Submersible Detachable connection cable Dry motor, stainless steel version ATEX certified (TP 65 3~ without floater) Attached float switch (A-model) enables easy operation Low weight Wide range of pump curves Motor housing optional in Operation in stationary and portable wet well installation Submersible Heavy-duty version made of cast iron Easy installation due to suspension unit or pump base Longitudinally watertight cable lead-in ATEX approval Stainless steel & composite ATEX approval (not for model "AM") Low weight Detachable connection cable Standard-equipped with cooling jacket Corrosion-resistant (e.g. swimming pool water, salt water, etc.) Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage

30 Building Services Heating, air-conditioning, cooling extension! Condensate lifting units Wilo-DrainLift Con Wilo-DrainLift Con Plus Wastewater lifting units Wilo-DrainLift TMP Wastewater lifting units for underfloor installation Wilo-DrainLift Box Small sewage lifting units Wilo-DrainLift KH 32 Condensate lifting units Wastewater lifting units Wastewater lifting units for underfloor installation For concealed floor installation, can be used to drain Rooms at risk of flooding Garage entrances Basement stairways Showers, washbasins, washing machines, dishwashers Small sewage lifting units For pumping condensate out of Heat generators with condensing boiler technology Air conditioning and cooling systems (e.g. refrigerators, refrigerated display cases and evaporators) For automatic drainage of showers, washbasins, washing machines/ dishwashers or for pumping wastewater and drainage water that is free of faeces, fibres, grease and oil and non-aggressive rainwater. For disposal of sewage from a single toilet (free-standing toilets) and e.g. an additional washbasin that cannot be discharged to the sewer system via the natural fall 0.6 m³/h Max. intake/h with S3 operation 156 (900 L) operating mode S3-10 % / S3-25 % Mains connection 1~230 V, 50 Hz Fluid temperature max. 35/45 C, for short periods (3 min.) 75/90 C Ventilation connection 25/32 mm Protection class IP 44/67 Gross tank volume 17/32 l Switching volume 2.6/15 l Max. intake/h with S3 operation L operating mode S3-10 % / S3-25 % Mains connection 1~230 V, 50 Hz Fluid temperature max. 35 C Protection class IP 67 Gross tank volume 85 l Switching volume: 22 l for type 40/10: 30 l Max. intake/h with S3 operation 260 L operating mode S3-25 % Mains connection 1~230 V, 50 Hz Fluid temperature max. 35 C Free ball passage 10 mm Protection class IP 44 Gross tank volume 17 l Switching volume 2.6 l 5.4 m Mains connection 1~230 V, 50 Hz Fluid temperature max. 80 C Protection class IP 20 Pressure port 10 mm Inlet connections 19/30 mm Gross tank volume 1.5 l (2 l) Ready-to-plug system Level control with float switch Alarm signal via potential-free contact (NC contact/no contact) Integrated non-return valve Fixation material 5 m pressure hose Ready-to-plug system Level control with pneumatic pressure transducer (TMP 32) Integrated non-return valve Fixation material Integrated active carbon filter (TMP 32) Integrated submersible pump of the TMW series (TMP 40) Ready-to-plug system Plastic tank with ready-mounted drainage pump, control, pressure pipe and integrated non-return valve Mains connection cable with shockproof plug Motor monitoring via temperature (WSK) Level control with float switch Ready-to-plug system Level control with pneumatic pressure transducer Non-return valve Inlet seal Kit for pressure pipe connection Fixation material Integrated active carbon filter Low-noise operation ( 43 db[a]) 2/4 inlet openings Standard alarm contact (NC/NO contact) Easy to install Motor unit reversible by 180 Variable inlets/drains Suitable for condensates with a ph value 2.4 Modern design Shower drain with a height of 110 mm possible (only in conjunction with TMP 32-0,5) Low-noise operation Service-friendly due to integrated submersible pump (TMP 40) Easy to install due to integrated pump and non-return valve Large tank volume Easy to maintain Pumps with pressure pipe that can be pulled Stainless steel tile frame with trap Modern, space-saving design Easy installation due to self-sealing, direct toilet connection Building Services catalogue, Drainage and Sewage and Heating, air-conditioning and cooling Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage

31 Building Services modification DrainLift M1/8 and M2/8 Small sewage lifting units for front wall installation Wilo-DrainLift XS-F Compact sewage lifting units with 1 integrated pump Wilo-DrainLift S Sewage lifting units with 1 or 2 integrated pumps Wilo-DrainLift M Wilo-DrainLift L Sewage lifting unit with 2 integrated pumps Wilo-DrainLift XL Small sewage lifting units Compact sewage lifting units with integrated pump Sewage lifting units with 1 or 2 integrated pumps Sewage lifting unit with 2 integrated pumps For the sewage disposal of a single toilet (wall-mounted WC) in addition to a hand washbasin, a shower or bidet, the wastewater/sewage of which cannot be discharged to the sewer system via the natural fall For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall 31 Max. intake/h with S3 operation 120 L Max. intake/h with S3 operation 600 L Max. intake/h with S3 operation L Max. intake/h with S3 operation L operating mode S3-30 % operating mode S3-15 %, 120 s operating mode S3-15 %, 80 s or 120 s operating mode S3-60 %, 120 s Mains connection 1~230 V, 50 Hz Fluid temperature max. 35 C Free ball passage 25 mm Protection class IP 44 Tank volume 7.9 l Switching volume 1.2 l Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz Max. fluid temperature 35 C, for short periods 60 C Protection class (without switchgear) IP 67 Gross tank volume 45 l Switching volume 20 l Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz Max. fluid temperature 40 C, for short periods 60 C Protection class (without switchgear) IP 67 Gross tank volume, depending on type, of 62 to 140 l Switching volume 24 to 50 l, depending on type Mains connection 3~400 V, 50 Hz Operating mode: S1; S3 Fluid temperature max. 40 C, for short periods 60 C Protection class IP 67 Tank volume 380 l Switching volume 260 l Ready-to-plug system for front wall installation Level control with pneumatic pressure transducer Potential-free contact Non-return valve Inlet seals Kit for pressure pipe connection Fixation material Active carbon filter Ready-to-plug Thermal motor monitoring Level control with pneumatic pressure transducer Potential-free contact Pump cable detachable Non-return valve Inlet seal Hole saw for inlet borehole Hose connection for ventilation Hose connection for diaphragm hand pump Fixation material Soundproofing material Ready-to-plug Thermal motor monitoring Level control with float switch Mains-independent alarm Potential-free contact Pump cable detachable Non-return valve (RV version) Inlet seal Hole saw for inlet borehole Hose connection for ventilation Kit for pressure pipe connection Fixation material Soundproofing material Switchgear Thermal motor monitoring Level control with level sensor Potential-free contact Pump cable detachable Inlet seal DN 150 Keyhole saw for inlet seal Non-return valve Hose connection for ventilation Hose connection for diaphragm hand pump Kit for pressure pipe connection Fixation material Switchgear with breakdown barrier Quiet operation for high user comfort Reliable due to integrated alarm Large scope of delivery (all sleeves, non-return valve, ventilation set with active carbon filter etc.) Easy to install due to: --Low weight --Large scope of delivery Flexible due to: --Freely selectable inlets --Front-wall-like installation --Space-saving installation (depth 30 cm) Safe due to: --Reliable pneumatic level measurement Easy to install due to: --Low weight --Only one pressure outlet with doublepump system (integrated Y-pipe) --Built-in non-return valve Flexible due to: --Freely selectable inlets Safe due to: --Large tank volume --Mains-independent alarm function --Additional potential-free contact --Integrated thermal motor protection Maintenance interval display and early error detection (DrainLift M2/8) Easy installation / commissioning due to --Built-in non-return valve --Higher flexibility in the intake area (connection is height-adjustable and can be swivelled) --Menu-prompted setting on switchgear Safe due to: --Large switching volume --Additional potential-free contact --Reliable level measurement due to level sensor --Suitable for permanent operation (due to integrated sheath current cooling) Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage

32 Building Services Sewage lifting unit with 2 dry-mounted pumps Wilo-DrainLift XXL Pumps station with synthetic tank Wilo-DrainLift WS 40 Basic Wilo-DrainLift WS Pumps station with synthetic tank Wilo-DrainLift WS 625 Pumps station with synthetic tank Wilo DrainLift WS 830 Wilo-DrainLift WS 900 Wilo-DrainLift WS 1100 Sewage lifting unit with 2 dry-mounted pumps Pumps station with synthetic tank or as sewage lifting unit in the building Pumps station with synthetic tank Pump stations with synthetic tanks, as a single- or double-pump system For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall Max. intake/h with S3 operation Operating mode S3-25%, 60 s Mains connection 3~400 V, 50 Hz Operating mode S1, S3 Max. fluid temperature 40 C, for short periods 60 C Protection class (without switchgear) IP 68 Gross tank volume 400/800 l Switching volume l For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall 60 m³/h For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall 15 m³/h For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall 180 m³/h 27 m Synthetic pumps station made of recyclable PE Maximum upward pressure reliability and inherent stability due to finning Inlets freely selectable on site For supply line in DN 100 Ventilation pipe connection in DN 70 Max. pressure in the pressure pipe 6 bar 27 m Synthetic pumps station made of recyclable PE Highest degree of upward pressure reliability due to finning Available in 4 heights, 1,200, 1,500, 1,800 and 2,100 mm Sump covers in the standard versions, can be walked on or driven over Max. pressure in the pressure pipe 6 bar (MTS 40) or 4 bar 55 m Synthetic pumps station made of recyclable PE Maximum upward pressure reliability due to 2 or 4 lateral fins 2/4 inlets can be selected onsite Maximum stability due to moulded hemispherical shape of the sump floor Wilo surface coupling Good accessibility of the level sensor due to installation with hinged supporting bar Max. traffic load 5 kn/m² (in accordance with DIN EN 124, Group 1) Max. pressure in the pressure pipe 6 bar Sheath current cooling Thermal motor monitoring and leakage detection Level control with level sensor Potential-free contact Pump cable detachable Hose connection for ventilation Hose connection for diaphragm hand pump Kit for pressure pipe connection Fixation material Switchgear with breakdown barrier in the housing Wilo-Drain pumps that can be used: TC 40 TP 50 TP 65 MTS 40/21 27 Wilo-Drain pumps that can be used: TMW 32 TC 40 STS 40 MTS 40/21 27 Wilo-Drain pumps that can be used: TS 40 TP 50 TP 65 STS 65 TP 80 MTC 32 MTC 40 MTS 40 Large tank volume Low weight Wide performance range Suitable for permanent operation (due to integrated sheath current cooling) Freely selectable inlets Flexible use: As lifting unit inside buildings or as pumps station outside buildings. Large tank volume (255/400 l) Flexible installation due to optional sump length extension Easy installation and maintenance of the pumps due to surface coupling when Wilo-Drain pumps TP 50 and/or TP 65 are used Also with macerator pumps Wilo-Drain MTS 40/21 27 Small sump diameter (625 mm) Flexible use due to different installation heights Complete due to integrated fittings and seals Can be walked on or driven over, depending on optional cover Also with Wilo-Drain MTS 40/ macerator pump Deposit-free collection space Maximum strength due to hemispherically shaped sump floor 2/4 inlets can be selected onsite stainless steel pipework Also with Wilo-Drain MTS macerator pump New generation of pump stations for pressure drainage (WS 830) Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage Building Services catalogue, Drainage and Sewage

33 Building Services 33

34 Water Management. Pump and pump systems for water supply and sewage disposal and sewage treatment in municipal buildings. Highlands water project Lesotho, Africa. Needs-based operation. The Task: To transfer water from rain-rich Lesotho to the drier industrial region of South Africa around Johannesburg. The water is taken from the Mohale Dam and transported 32 km to the Katse Dam. The Solution: Wilo delivered two submersible pumps with needs-based throttling due to the large difference between the two water levels.

35 . Wilo-EMU KM NU 911 submersible pumps. Perfect for water supply/transport. Sewage disposal. Wilo-EMU FA submersible pump. High operating reliability in sewage disposal. Sewage treatment. Wilo EMU Megaprop TR 326 Submersible mixer. Enormous energy savings in water purification. Pumping station Tuzla, Turkey Reliable sewage disposal. The Task: The municipal sewage treatment facility in Tuzla cleans sewage produced by 4.5 million residents from 7 regions in the dormitory towns around Istanbul. Sewage collection is ensured by means of 2 separate subterranean sewer systems. Afterwards, the sewage must be raised above a level gap of m to supply it to the wastewater treatment plant. 2 pump stations are in continuous use here. The Solution: Wilo supplied reliable submersible pumps of type Wilo-EMU FA 50. All pumps are fitted with a ceramic coating here. Wastewater treatment plant Atlanta, USA For minimum life cycle costs. The Task: To increase efficiency in the fields of mixed media, purification and food filtration. The Solution: Wilo supplied 134 high-efficiency and low-wearing submersible mixers due to their flawless operation and the enormous energy savings during the test phase right up to today! High competence for water and sewage. Clean water is becoming increasingly scarce. This makes the sourcing and transportation of valuable water a ceaseless challenge. In view of the variety of sources, e.g. desalinated seawater or aquifers, treatment systems must be more flexible to meet the different compositions of the water. Pumps and components from Wilo are able to supply the fluid for as efficiently and for as long as possible in the best possible way. When it comes to environmental protection and preserving natural resources, sewage disposal and sewage treatment play an important part. Ongoing challenges such as the increasing content of solid in sewage which makes operating conditions for plants and equipment more difficult create a need for innovative approaches. Wilo offers the right solution for any application: with the highest safety standards and lowest costs. 35

36 Wilo Online catalogue. All pumps for the Water Management segment at a glance.

37 Product overview. Water Management. from page 38 Pumps, pump systems and accessories for > and pressure boosting > Clean water treatment > Raw water intake > Desalination > Commercial agriculture 37 Special applications. from page 38 to 49 Pumps, pump systems and accessories for applications in energy generation and leisure area, as well as services for pump systems. Drainage and sewage from page 42 Pumps, pump systems and accessories for > Wastewater collection and transport > Sewage treatment > Dewatering and flood protection

38 Water Management Standard glanded pumps Wilo-CronoNorm NL Wilo-VeroNorm-NPG Axially split case pumps Wilo-SCP Single-stage low-pressure centrifugal pump with axial suction, in accordance with EN 733 and ISO 5199, mounted on baseplate. Pumping clean or slightly contaminated water (max. 20 ppm) without solid matter for circulation, transfer and pressure boosting purposes. For pumping heating water in accordance with VDI 2035, water/ glycol mixtures, cooling/cold water and process water. For applications in municipal water supply, irrigation, building services, industry, power stations etc. 3,000 m³/h 140 m Perm. temperature range -20 C to +140 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter on suction side DN 50 to DN 500 Nominal diameter on pressure side DN 32 to DN 500 Maximum operating pressure: depending on type and application up to 16 bar Single-stage low-pressure centrifugal pump in monobloc design with coupling, coupling protection, motor and baseplate Mechanical seal or stuffing box Wilo factory motor or ATB motor Materials: Pump housing: EN-GJL-250 Impeller: EN-GJL-250 Shaft: High-efficiency motors as standard; from 0.75 kw nominal motor power motors with IE2 technology Other materials and versions on request Low-pressure centrifugal pump with axially split housing mounted on a baseplate For pumping heating water in accordance with VDI 2035, water/glycol mixtures, cooling/cold water and process water. For applications in municipal water supply, irrigation, building services, industry, power stations etc. 3,400 m³/h 245 m Perm. temperature range -8 C to +120 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter on suction side DN 65 to DN 500 Nominal diameter on pressure side DN 50 to DN 400 Max. operating pressure: depending on type 16 or 25 bar 1- or 2-stage, low-pressure centrifugal pump in monobloc design Delivered as complete unit (pump with coupling, coupling protection, motor and baseplate) or without motor or only pump hydraulics Shaft seal with mechanical seal or stuffing box 4 -pole and 6-pole motors Materials: Pump housing: EN-GJL-250 Impeller: G CuSn5 ZnPb Shaft: X12Cr13 Higher capacities up to 17,000 m³/h on request Special motors and other materials on request

39 Water Management extension extension modification extension Vertical, multistage centrifugal pumps Wilo-Helix-V Vertical, multistage centrifugal pumps Wilo-Helix-VE Vertical, multistage centrifugal pumps Wilo-Multivert MVI Vertical, multistage centrifugal pumps Wilo-Multivert-MVIE Non-self-priming multistage pump Non-self-priming multistage pump Non-self-priming multistage pump Non-self-priming multistage pump with integrated frequency converter and pressure boosting Industrial circulation systems Process water Cooling water circulation systems Fire extinguishing systems Washing systems Irrigation and pressure boosting Industrial circulation systems Process water Cooling water circulation systems Washing systems Irrigation and pressure boosting Fire extinguishing systems Boiler feed Industrial circulation systems Process engineering Cooling water circulation systems Washing and sprinkling systems and pressure boosting Industrial circulation systems Process engineering Cooling water circulation systems Washing and sprinkling systems m³/h 45 m³/h 155 m³/h 145 m³/h 232 m Fluid temperature -20 to +120 C Operating pressure max. 16/25 bar Inlet pressure max. 10 bar Protection class IP 55 PN 16 and PN 25 with loose round flanges 234 m Fluid temperature -20 to +120 C Operating pressure max. 16/25 bar Inlet pressure max. 10 bar Protection class IP 55 PN 16 and PN 25 with loose round flanges 235 m Fluid temperature -15 to +120 C Operating pressure max. 16/25 bar Inlet pressure max. 10 bar Protection class IP m Fluid temperature -15 to +120 C Operating pressure max. 16 bar/25 bar Inlet pressure max. 6 bar Protection class IP 54 or IP 55 Impellers and stage chambers made of stainless steel, pump housing made of EN-GJL-250 cast iron, cataphoretic-coated Versions with 1.44xx stainless steel designed for aggressive fluids Versions --PN16 with oval flanges and PN25 with round DIN flanges --Helix V22, 32, 52 PN16 and PN25 with round loose flanges as per ISO 2531 and ISO 7005 IE2/IEC standard three-phase AC motor Impellers and stage chambers made of stainless steel, pump housing made of EN-GJL-250 cast iron, cataphoretic-coated Versions with 1.44xx stainless steel designed for aggressive fluids PN16 and PN25 versions with round loose flanges in accordance with ISO 2531 and ISO 7005 IE2/IEC standard three-phase AC motor Integrated frequency converter Stainless steel pump in in-line design Version PN16 with oval flanges PN16/25 with DIN round flanges; Victaulic connections depending on pump IE2/IEC standard three phase motor, 2-pole, AC or DC version. Single-phase AC motor with integrated thermal motor protection Stainless steel pump in in-line design PN16 with oval flanges PN16/25 with DIN round flanges; Victaulic connections depending on pump Single-phase or three-phase current standard motor Integrated frequency converter Integrated thermal motor protection Protection against low water level Helix V22 Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid Helix VE22 Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid MVI All parts that come in contact with the fluid made of stainless steel (AISI 304) or (AISI 316L) MVI 1600 MVI 9500 depending on pump type in stainless steel (AISI 316L) or (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating All relevant components have KTW and WRAS approval Easy commissioning Full motor protection Large control range MVI All parts that come in contact with the fluid made of stainless steel (AISI 304) or (AISI 316L) MVI 1600 MVI 9500 depending on pump type in stainless steel (AISI 316L) or (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating All relevant components have KTW and WRAS approval

40 Water Management extension extension Sprinkler pumps with VdS approval Wilo-EMU sprinkler pumps Submersible pumps Wilo-Sub TWU 6 Wilo-Sub TWU 8 Submersible pumps Wilo-Sub TWI 4 Wilo-Sub TWI 6 Wilo-Sub TWI 8 Wilo-Sub TWI 10 Submersible pumps Wilo-EMU 6" series Wilo-EMU 8" series Wilo-EMU 10" 24 series Sprinkler pump in sectional design Submersible pump, multistage Submersible pump, multistage Submersible pump with sectional construction For supplying sprinkler systems from boreholes and cisterns; sprinkling and irrigation; for lowering the water level; for pumping water without long-fibre and abrasive constituents Water and potable water supply from boreholes and cisterns; process water supply; municipal and industrial water supply; sprinkling and irrigation; pressure boosting; lowering the water level; for pumping water without long-fibre and abrasive constituents Water and potable water supply from boreholes and cisterns; process water supply; municipal and industrial water supply; sprinkling and irrigation; pressure boosting; lowering the water level; utilisation of geothermal energy and offshore applications; supplying fountains, snow cannons and water organs 2400 m³/h 580 m³/h 132 m³/h 165 m³/h 140 m Mains connection: 3~400 V/50 Hz Immersed operating mode: S1 Max. fluid temperature: 25 C, higher temperatures on request Min. flow at motor: 0.1 m/s Max. sand content: 35 g/m³ Up to 10 starts per hour Max. immersion depth: --NU 611 = 100 m --Other motors = 300 m 380 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Fluid temperature: 3-30 C Min. flow at motor: 0.16 m/s (4" motors = 0.08 m/s) Max. sand content: 50 g/m³ Up to 20 starts per hour Max. immersion depth: --TWU 6 = 250 m --TWU 8 = 350 m 500 m Mains connection: 1~230 V, 50 Hz (only TWI 4 ) or 3~400 V, 50 Hz Immersed operating mode: S1 Fluid temperature: 3-20 C or 3-30 C Min. flow at motor: m/s Max. sand content: 50 g/m³ Up to 10 or 20 starts per hour Max. immersion depth: m 560 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: C Min. flow at motor: m/s Max. sand content: 35 g/m³ Up to 10 starts per hour Max. immersion depth: 100 or 300/350 % Control range for frequency converter: or Hz Immersible, multistage submersible pump Radial or semi-axial impellers NEMA coupling (depending on type) Three-phase motor for direct or stardelta start. Rewindable motors Immersible, multistage submersible pump Radial or semi-axial impellers Integrated non-return valve NEMA coupling Three-phase motor Hermetically cast motors Multistage submersible pump with radial or semi-axial impellers Integrated non-return valve NEMA coupling AC-(only TWI 4) or three phase motor Hermetically sealed or rewindable (TWI 6 / TWI 8 / TWI 10...) motors Immersible, multistage submersible pump Radial or semi-axial impellers Hydraulics and motor freely configurable according to power requirements Integrated non-return valve (depending on type) NEMA coupling or standardised connection (from 10" motors on) Three-phase motor for direct or stardelta start. VdS certification Certified non-return valve available as accessory Version in bronze material Pressure shroud installation possible Vertical and horizontal installation possible Impellers made of bronze Integrated non-return valve Immersion depth up to 350 m Vertical and horizontal installation possible Unit made completely of stainless steel Integrated non-return valve Vertical and horizontal installation possible Standard and configurable versions available (TWI 6 / TWI 8 / TWI 10...) Star-delta version Rewindable motors Water pumping with large volume flows Corrosion-resistant impellers Wear-resistant GI bushing (depending on type) Special materials possible Individual adjustment to duty point due to impeller correction 4-pole motors for long service life and high degree of efficiency Motors with CoolAct technology for high power density (from 10" motors on) High voltage up to 6000 V possible Vertical and horizontal installation possible Ceram CT coating possible to increase effectiveness Pressure shroud installation option

41 Water Management Submersible pumps Wilo-EMU bottom intake pumps Vertical turbine pumps VMF, CNE, VAF Submersible bottom intake pump Dry installed vertical turbine pumps with immersed axial- or semi-axial hydraulics Potable and process water from tanks or shallow bodies of water; municipal and industrial water supply; sprinkling and irrigation; lowering the water level; utilisation of geothermal energy and offshore applications; For industrial or municipal water supply and Irrigation Fire-extinguishing water supply Cooling water supply Drainage and high water protection m³/h 160 m Mains connection: 3~400 V, 50 Hz Max. fluid temperature: 20 C Min. flow at outside shroud: not necessary Max. sand content: 35 g/m³ Up to 10 starts per hour Max. immersion depth: 300 m Control range for frequency converter: --2-pole: Hz --4-pole: Hz m³/h 450 m Perm. temperature range to 80 C 105 C Nominal diameter DN 100 to DN 2000 Immersible, multistage submersible pump Semi-axial impellers Hydraulics and motor freely configurable according to power requirements Three-phase motor for direct or stardelta start. Motors rewindable as standard Deep water lowering Self-cooling design Easy installation on the ascending pipe Wear-resistant design due to different material versions Compact design Rewindable motors Individual adjustment to duty point due to impeller correction Ceram CT coating possible to increase effectiveness For installation types with pressure ports for underground, above-ground or twinroof installation --as removable or permanent installation -- with axial or semi-axial, single or multistage hydraulics --with open shaft for bearing lubrication with the fluid or with shaft trim for separate bearing lubrication Drive options: Electric motor, Diesel motor or steam turbine Minimum surface area needed High hydraulic efficiency immersed pump hydraulics to order as per customer specifications Documentation on request

42 Water Management Submersible drainage pumps Wilo-Drain TM/TMW/TMR 32 Wilo-Drain TS/TSW 32 Submersible drainage pumps Wilo-Drain TS 40 Wilo-Drain TS 50 Wilo-Drain TS 65 Submersible drainage pumps Wilo-EMU KS Self-priming drainage pumps Wilo-Drain LP Wilo-Drain LPC Basement drainage pump Submersible drainage pumps Submersible drainage pumps in rugged design for use on building sites For drainage of excavation pits, cellar areas, pits and basins. Ideally suited for applications in fountains Dry-mounted and self-priming drainage pumps For pumping wastewater with small amounts of solid matter for Excavation pits and ponds Sprinkling / spraying of gardens and green areas Drainage of seepage water Mobile drainage For pumping clear or slightly muddy water From tanks, sumps or pits For overflows and flooding For draining basement stairways and basement areas From domestic areas (washing machine water, soapsuds) From small fountains, waterworks or streams For pumping wastewater with foreign matter of max. ø 10 mm for House/site drainage Environmental and water treatment technology Industrial and process engineering 16 m³/h 53 m³/h 340 m³/h 71 m³/h 12 m Mains connection 1~230 V, 50 Hz Protection class IP 68 Max. submersion depth TM/TMW = 3m, TS/TSW = 10m Fluid temperature 3 C to 35 C, for short periods up to 3 min. max. 90 C Cable length 3 to 10 m, depending on type Free ball passage 10 mm Pressure port Rp 1¼, hose connection 35 mm (TM 32/...), 32 mm (R1) for TS/ TSW 25 m Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz Protection class IP 68 Submersion depth 5 to 10 m Fluid temperature 3 C to 35 C Free ball passage 10 mm Pressure port, depending on type Rp 1½, Rp 2 or Rp 2½ 71 m Operating mode S1 Max. fluid temperature 40 C Protection class IP 68 Sealed by double mechanical seal Maintenance-free roller bearing 29 m Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz Fluid temperature 3 C to 35 C Free ball passage, depending on type 5 to 12 mm Connection Rp 1½ to G3 Ready-to-plug Motor monitoring via temperature Sheath current cooling Connection cable Hose connection Turbulator (TMW, TSW) Float switch (depending on type) Non-return valve enclosed (depending on type) Ready-to-plug versions also with float switch Thermal motor monitoring Explosion protection for TS 50 and TS 65 Connection cable 10 m Connection cable detachable Integrated non-return valve for TS 40 Hose connection for TS 40 Mechanical seal independent of direction of rotation Heavy-duty motors (oil-filled and dry) ensure permanent operation even with non-immersed motor Corrosion-resistant components Portable self-priming centrifugal pump TMW, TSW with turbulator for constantly clean pump sump No fluid-related odour formation Easy installation High operational reliability Easy operation Inox & composite Low weight Detachable connection cable Detachable float switch for model A Thermal motor monitoring for AC motor without switchgear Modular material system: Normal cast iron version Wear protection due to ceramic coating Pump components made of Abrasite (chilled cast iron) With Ex protection, depending on type High operational reliability Easy handling Easy operation

43 Water Management modification Submersible sewage pumps with macerator Wilo-Drain MTC Wilo-Drain MTS Submersible sewage pumps Wilo-Drain TC 40 Submersible sewage pumps Wilo-Drain STS 40 Wilo-Drain STS 65 Submersible sewage pumps Wilo-Drain TP 50 Wilo-Drain TP 65 Submersible sewage pumps with macerator For pumping sewage containing faeces and municipal and industrial sewage, including fibrous matter for pressure drainage, house and site drainage, sewage and water management and environmental and water treatment technology Submersible sewage pump Submersible sewage pumps Submersible sewage pumps For pumping heavily contaminated fluids for house/site drainage, sewage (not within the scope of DIN EN ) and water management and environmental and water treatment technology For pumping heavily contaminated fluids containing faeces (STS 65 ), for house and site drainage, sewage (not within the scope of DIN EN ) and water treatment technology and industrial and process engineering For pumping heavily contaminated fluids containing faeces (STS 65 ), for house and site drainage, sewage (not within the scope of DIN EN ) and water treatment technology and industrial and process engineering m³/h 22 m³/h 70 m³/h 60 m³/h 55 m Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Immersed operating mode: S1 / S3 25% (depending on type) Insulation class: F Thermal winding monitoring Max. fluid temperature: 3 40 C 10 m Mains connection: 1~230 V, 50 Hz Immersed operating mode: S1, S3 25% Insulation class: B Thermal winding monitoring Max. fluid temperature: 3 40 C Free ball passage: 35 m Max. immersion depth: 5 m 22 m Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Immersed operating mode: S1, S3 25% Surfaced operating mode STS 65 : S2-8 min or S1 in CS version Insulation class: --STS 40 : B --STS 65 : F Thermal winding monitoring Max. fluid temperature: 3 40 C Free ball passage: 40 or 65 mm Max. immersion depth: 5 10 m 21 m Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz Immersed operating mode: S1, S3 25% Insulation class: F Thermal winding monitoring Max. fluid temperature: 35 C Free ball passage: 44 m Max. immersion depth: 10 m Heavy-duty version made of cast iron Unimpeded flow to the impeller Maceration of substances being pumped Simple installation via suspension unit or pump base Attached float switch (only model A) Ready-to-plug Including float switch Thermal motor monitoring AC variant ready-to-plug A-model including float switch Thermal motor monitoring CS version with cooling jacket for dry well installation AC variant with capacitor box A-model including float switch and plug Thermal motor monitoring ATEX approval (TP 65 3~ without float) MTC: External macerator MTS: Innovative patented macerator Internal rotating blade Spherically formed macerator Pulling cut (shearing cut) Submersible Oil barrier chamber High degree of efficiency Mechanical seal on pump side made of solid silicon carbide material External hardened macerator (MTC) Internal, spherically formed macerator (MTS) Longitudinally watertight cable Version with Ex protection (depending on type) Submersible Heavy-duty hydraulic housing made of cast iron Easy operation due to the attached float switch Integrated stainless steel pump base for easy installation Free ball passage: 40 m Submersible Connection cable detachable Dry motor, stainless steel version Attached float switch (A-model) enables easy operation Integrated pump base (STS 40) for easy installation Free ball passage: mm STS 65 with connection to a discharge pipeline DN 80 complies with DIN EN No switchgear needed for thermal fuse protection (STS 40...) Integrated thermal motor protection (1~/3~) and phase failure protection (3~) for STS 40 Longitudinally watertight cable version (STS 65F ) ATEX approval (STS 65F ) Submersible Detachable connection cable Dry motor, stainless steel version ATEX certified (TP 65 3~ without floater) Attached float switch (A-model) enables easy operation Low weight Wide range of pump curves Motor housing optional in

44 Water Management Submersible sewage pumps Wilo-Drain TP 80 Wilo-Drain TP 100 Wilo-Drain TP...-AM extension modification Submersible sewage pumps Wilo-EMU FA 05 to FA 15 Submersible sewage pump for industrial applications For pumping heavily contaminated fluids, for environmental and water treatment technology and industrial and process engineering 180 m³/h 21 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1, S3 25% Surfaced operating mode: S1, S3 25% Insulation class: F Thermal winding monitoring Sealing chamber control Max. fluid temperature: 40 C Free ball passage: 80 or 100 mm Max. immersion depth: 20 m Submersible sewage pumps For pumping sewage with solid constituents in water treatment systems and pumping stations; local drainage, water control and process water extraction; applications in construction and industry 103 m³/h 51 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Surfaced operating mode: S2-15 or S2-30 (depending on type) Thermal motor monitoring Insulation class: F Max. fluid temperature: 40 C Free ball passage of 35 to 100 mm Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Thermal motor monitoring Sealing chamber monitoring ATEX approval (not for model AM ) Sheath current cooling Model AM with float switch, CEE plug and transport frame Heavy-duty version made of cast iron Simple installation via suspension unit or pump base Stainless steel & composite ATEX approval (not for model AM ) Low weight Detachable connection cable Standard-equipped with cooling jacket Corrosion-resistant (e.g. swimming pool water, salt water, etc.) Operation in stationary and portable wet well installation Submersible Heavy-duty version made of cast iron Easy installation due to suspension unit or pump base Longitudinally watertight cable lead-in ATEX approval

45 Water Management Submersible sewage pumps Wilo-EMU FA 05 to FA 15 Wilo-EMU FA 20 to FA 25 Wilo-EMU FA 30 to FA 60 Submersible sewage pumps Wilo-EMU FA RF Submersible sewage pumps Wilo-EMU FA WR Submersible sewage pumps Wilo-EMU KPR Submersible sewage pump with dry motors or self-cooling motors For pumping sewage with solid constituents in water treatment systems and pumping stations; local drainage, water control and process water extraction; applications in construction and industry 7950 m³/h Submersible pumps made of cast stainless steel In water treatment applications or industrial applications Submersible sewage pump with mechanical stirring apparatus In grit chambers and for pumping sludge Axial submersible pump with dry motor for use in pipe sumps For pumping cooling or rainwater, cleaned sewage and for irrigation and pumping sludge m³/h 72 m³/h 9500 m³/h 87 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Surfaced operating mode with selfcooling motor: S1 Max. fluid temperature: 40 C, higher temperatures on request Sealing with rotary shaft seal and mechanical seal, two mechanical seals or one block seal cartridge, depending on motor Free ball passage of 35 to 170 mm Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m 30 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: 40 C, higher temperatures on request Sealing with two mechanical seals or one block seal cartridge, depending on motor Free ball passage of 35 to 45 mm Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m 27 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Surfaced operating mode with selfcooling motor: S1 Max. fluid temperature: 40 C, higher temperatures on request Sealing with rotary shaft seal and mechanical seal, two mechanical seals or one block seal cartridge, depending on motor Free ball passage of 23 to 58 mm Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m 8.4 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: 40 C, higher temperatures on request Sealing with two mechanical seals or one block seal cartridge, depending on motor Free ball passage of 85 to 130 mm Short common pump/motor shaft Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Heavy-duty version made of cast iron Self-cooling motors with 1 or 2-chamber system Simple installation via suspension unit or pump base Heavy-duty version made of cast stainless steel (1.4581) Simple installation via suspension unit or pump base Heavy-duty version made of cast iron Self-cooling motors with 1 or 2-chamber system Simple installation via suspension unit or pump base Mechanical stirring apparatus is fastened directly to the impeller Mixer head made of chilled cast iron, Abrasite Heavy-duty version made of cast iron Operation in stationary and portable wet well and dry well installation Submersible Easy installation due to suspension unit or pump base Special materials and coatings against abrasion and corrosion Longitudinally watertight cable lead-in (depending on motor) Adjustment of duty point by trimming the impeller Operation in stationary and portable wet well installation Submersible Version made completely of cast stainless steel Easy installation due to suspension unit or pump base Longitudinally watertight cable lead-in Adjustment of duty point by trimming the impeller Operation in stationary and portable wet well installation Submersible Avoidance of deposits in the suction area of the pump Easy installation due to suspension unit or pump base Coatings against abrasion and corrosion Longitudinally watertight cable lead-in (depending on motor) Adjustment of duty point by trimming the impeller Submersible Special materials and coatings against abrasion and corrosion Longitudinally watertight cable lead-in Angle of propeller blades adjustable by hand

46 Water Management Pumps station with synthetic tank Wilo-DrainLift WS 40 Basic Wilo-DrainLift WS Pumps station with synthetic tank Wilo-DrainLift WS 625 Pumps station with synthetic tank Wilo DrainLift WS 830 Wilo-DrainLift WS 900 Wilo-DrainLift WS 1100 Solids separation system Wilo-EMUport FTS MG... Wilo-EMUport FTS MS... Wilo-EMUport FTS FG... Wilo-EMUport FTS FS... Pumps station with synthetic tank or as sewage lifting unit in the building For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall Pumps station with synthetic tank Pumps station with synthetic tanks, as single or twin pump system For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall Underground pumping station made of PEHD For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall For pumping untreated sewage that cannot be discharged to the sewer system via the natural fall 60 m³/h 15 m³/h 180 m³/h On request On request Pumps stations ready for connection With dry-mounted sewage pumps and solids separation system Available in shaft- (MS, FS) or building version (MG, FG) 27 m Synthetic pumps station made of recyclable PE Maximum upward pressure reliability and inherent stability due to finning Inlets freely selectable on site For supply line in DN 100 Ventilation pipe connection in DN 70 Max. pressure in the pressure pipe 6 bar 27 m Synthetic pumps station made of recyclable PE Highest degree of upward pressure reliability due to finning Available in 4 heights, 1,200, 1,500, 1,800 and 2,100 mm Sump covers in the standard versions, can be walked on or driven over Max. pressure in the pressure pipe 6 bar (MTS 40) or 4 bar 55 m Synthetic pumps station made of recyclable PE Maximum upward pressure reliability due to 2 or 4 lateral fins 2/4 inlets can be selected onsite Maximum stability due to moulded hemispherical shape of the sump floor Wilo surface coupling Good accessibility of the level sensor due to installation with hinged supporting bar Max. traffic load 5 kn/m² (in accordance with DIN EN 124, Group 1) Max. pressure in the pressure pipe 6 bar Wilo-Drain pumps that can be used: TC 40 TP 50 TP 65 MTS 40/21 27 Wilo-Drain pumps that can be used: TMW 32 TC 40 STS 40 MTS 40/21 27 Wilo-Drain pumps that can be used: TS 40 TP 50 TP 65 STS 65 TP 80 MTC 32 MTC 40 MTS 40 Deposit-free collection space Maximum strength due to hemispherically shaped sump floor 2/4 inlets can be selected onsite stainless steel pipework Also with Wilo-Drain MTS macerator pump New generation of pump stations for pressure drainage (WS 830) Solids separation system --Collection reservoir --2x solids tank --2x sewage pumps --complete piping network incl. feed and pressure connection and nonreturn valve Freely selectable inlets Flexible use: As lifting unit inside buildings or as pumps station outside buildings. Large tank volume (255/400 l) Flexible installation due to optional sump length extension Easy installation and maintenance of the pumps due to surface coupling when Wilo-Drain pumps TP 50 and/or TP 65 are used Also with macerator pumps Wilo-Drain MTS 40/21 27 Small sump diameter (625 mm) Flexible use due to different installation heights Complete due to integrated fittings and seals Can be walked on or driven over, depending on optional cover Also with Wilo-Drain MTS 40/ macerator pump Low maintenance and operating costs Pump room is dry, clean and odourless the system remains fully functional even during the maintenance of a pump Low wear

47 Water Management extension extension extension Wilo-EMU Miniprop TR 14 to TR 28 Wilo-EMU Uniprop without gear TR 22 to TR 40 Wilo-EMU Uniprop with gear TR 50-2 to TR 90-2 TRE 90-2 with IE3 motor Wilo-EMU Maxi-/Megaprop with gear TR 216 to TR 226 TR 316 to TR 326 TRE 221/TRE 321 with IE3 motor Compact directly driven submersible mixer Swirling of deposits and solids in rain spillway basin and pump sump; destruction of floating sludge layers; other areas of application in agriculture and water supply Compact directly driven submersible mixer Swirling of deposits and solids in rain spillway basin and pump sump; destruction of floating sludge layers; other areas of application in agriculture and water supply Submersible mixer with single-stage planetary gear in activated sludge tanks and sludge tanks for creation of fluid current, suspension of solids, homogenisation and prevention of floating sludge layers; other areas of application in industry, agriculture and water supply Thrust: N Slow-running submersible mixer with two-stage planetary gear Energy-optimised mixing and circulation of activated sludge; generation of flow rates in circulation channels; further areas of application in industry 47 Thrust: N Thrust: N Thrust: N Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: 40 C Mechanical seal with SiC/SiC combination Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: 40 C Mechanical seal with SiC/SiC combination Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: 40 C Single-stage planetary gear Mechanical seal with SiC/SiC combination Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: 40 C Two-stage planetary gear with exchangeable second planetary stage Mechanical seal with SiC/SiC combination Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Stationary installation on walls and floors Flexible installation through the use of lowering device or special pipe attachment Can be swivelled vertically and horizontally for installation with lowering device Stationary installation on walls and floors Flexible installation through the use of lowering device Can be swivelled vertically and horizontally for installation with lowering device Stationary installation on walls Flexible installation through the use of lowering device Can be swivelled horizontally for installation with lowering device Installation with stand allows free placement in basin Single-stage planetary gear Installation with stand allows free placement in basin Flexible installation Two-stage planetary gear with exchangeable second planetary stage Submersible Low power consumption Low weight ATEX and FM versions Self-cleaning propeller with helix hub Easy-to-install propeller attachment Propeller in steel or PUR version Optional: Motor shaft made of material Submersible Self-cleaning propeller with helix hub Easy-to-install propeller attachment Propeller in steel or PUR version ATEX and FM versions Submersible Single-stage planetary gear for adjusting the propeller speed Self-cleaning propeller Easy-to-install propeller attachment Propeller in steel, PUR or PUR/GFK version ATEX and FM versions gear shaft Type "TRE" with IE3 performance optimised motors Submersible 2-stage planetary gear for adjusting the propeller speed Self-cleaning propeller Propeller blades can be replaced individually Easy-to-install blades and hub Propeller in GFK version ATEX and FM versions gear shaft "TRE" type with high performance motors according to IE3

48 Water Management Wilo-EMU Rezijet RZP 20 to RZP 80-2 modification Submersible mixers with housing unit, direct driven (RZP 20, RZP 25-2 RZP 40...) or with 1-stage planetary gear (RZP 50-3, RZP 60-3, RZP 80-2 ) For pumping sewage via low delivery heads at high flow rates, e.g. between balancing, nitrification and denitrification basins; for pumping process, raw, pure and cooling water, e.g. in paint finishing systems or for potable water treatment; generation of fluid current in water channels, e.g. amusement parks 6800 m³/h 1,1 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: 40 C Units are directly driven or with singlestage planetary gear Mechanical seal with SiC/SiC combination Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Stationary installation directly on flow pipe Flexible installation through the use of lowering device Vertical or in-line installation possible Submersible Vertical or in-line design Self-cleaning propeller, partially with helix hub Propeller in steel or PUR version ATEX and FM versions

49 Water Management 49

50 Industry. Pump and pumping systems for cooling water and heating circuits, raw water intake, water and fire extinguishing water supply and for water treatment and sewage disposal. Anpara power plant, India. Efficiency writ large. The Task: The Anpara power plant is the largest one in Uttar Pradesh with an output of 1,630 MW. Plants of this size need a continuous supply of very large amounts of coolant The Solution: Wilo developed its most powerful system yet. Each one of the 5 pipe housing pumps in Anpara delivered a flow of m³/h. Besides the very high flow rate, the customer also specified a very high efficiency level of 90%.

51 Raw water intake. Wilo vertical turbine pump. New dimensions for transporting water. Lime water circuit. Wilo-EMU FA submersible pump. Best wear protection. Process water disposal. Wilo-EMU KM submersible water pump. Needs-based water supply. Salzgitter Flachstahl GmbH, Salzgitter, Germany. In the exact climate control of special office, production or storage spaces and low-temperature applications, Wilo pumps have also shown their worth also in fire extinguisher systems and water supply, disposal and treatment. The Task: Following the expansion of the warm water rolling mill, the increased production increased the load on the scale-forming water from 8,000 to 11,000 m³/h. This made a second circuit necessary. The Solution: A highly wear resistant Wilo-EMU FA 30 submersible motor pump came into use. It managed a service life of over one year and was easily replaced by two technicians in just two days. A comparison with previously installed standard pumps: a considerable reduction in life cycle costs. Paulaner Brauerei GmbH & Co KG, Munich, Germany. Brewery water supply on tap. The Task: For brewing and additional process steps, such as e. g. bottle cleaning, the brewery needs around 900,000 m³ water per year. This high water requirement should be met by 5 up to 240m deep wells. The Solution: Each well was equipped with a multistage heavy-duty submersible pump Wilo-EMU N 82. From a depth of 80 m these 5 pumps serve the fluctuating water demand during running beer production. The variable speed pump controls with frequency converters ensure needs-based and an extremely energy-efficient water supply. Highest priority at lowest energy consumption. The transport of fluids of a wide variety of types is the basis for many industrial production processes. Wilo pumps and systems for business and industry guarantee a high degree of reliability, flexibility and efficiency. Our particular strength lies in applications in the process-supporting periphery in such a diverse range of areas such as the food and metal industry, mining and electricity generation. Also in the precise climate control of special office, production or storage rooms such as in low-temperature applications, Wilo pumps do not fail to convince also in fire extinguishing technology and water supply, drainage and treatment. Our recognised expertise results from a mature product range, joined up knowledge and effective quality management. 51

52 Wilo Online catalogue. All pumps for the Industry segment at a glance.

53 Product overview. Industry. Industrial processes from page 54 Pumps for process-supporting peripheral applications in the food and metal industries, in mining and energy generation. 53 Heating, cooling, air-conditioning from page 57 Pumps, pump systems and accessories for heating and cooling applications and airconditioning. from page 60 Pumps, pump systems and accessories for > and pressure boosting > Fire-extinguishing water supply > Clean water treatment > Raw water intake > Desalination Drainage and sewage from page 64 Pumps, pump systems and accessories for > Wastewater collection and transport > Sewage treatment > Dewatering

54 Industry Industry processes Industry processes Industry processes Industry processes Glanded monobloc pumps Wilo CronoBloc BL Glanded norm pumps Wilo-CronoNorm NL Wilo-VeroNorm-NPG Norm pumps according to EN733 NOLH NOEH Norm pumps according to EN733 and EN22858 NESD NESE Glanded pump in monobloc design with flange connection Single-stage low-pressure centrifugal pump with axial suction, in accordance with EN 733 and ISO 5199, mounted on baseplate. Pumping clean or slightly contaminated water (max. 20 ppm) without solid matter for circulation, transfer and pressure boosting purposes. For pumping heating water in accordance with VDI 2035, water/ glycol mixtures, cooling/cold water and process water. For applications in municipal water supply, irrigation, building services, industry, power stations etc. Single-stage centrifugal pump mounted on a baseplate Single-stage centrifugal pump mounted on a baseplate For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems. For supplying clean or lightly contaminated fluids without solid material. For use in the following applications: Industrial processes Non-hygienic food industry Power generation Water circulation in the metal industry Heating, cold water and coolant plants For heat transfer or circulating hot water in industrial processes, for power generation or in building services. 360 m³/h 3,000 m³/h 1800 m³/h 600 m³/h 105 m Perm. temperature range -20 C to +140 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter DN 32 to DN 150 Max. operating pressure 16 bar (25 bar on request) 140 m Perm. temperature range -20 C to +140 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter on suction side DN 50 to DN 500 Nominal diameter on pressure side DN 32 to DN 500 Maximum operating pressure: depending on type and application up to 16 bar 140 m Permissible temperature range -20 C to +120 C Mains connection 3~400 V, 50 Hz Nominal diameter on pressure side DN 32 to DN 125 Max. operating pressure PN16 90 m Max. permissible fluid temperature NESD: 207 C NESE: 0 C C (40 bar) 120 C 200 C (35 bar) 200 C C (32 bar) Minimum fluid temperature: 170 C Nominal diameter on pressure side DN 32 to DN 125 Max. operating pressure NESD: PN25; NESE: PN25 Single-stage low-pressure centrifugal pump in block design, with axial suction port and radially arranged pressure port with Mechanical seal Flange connection with pressure measuring connection R 1/8 Lantern Coupling IEC standard motor Materials Pump housing standard: EN-GJL-250 Optional: EN-GJS Impeller (standard): EN GJL 200 Special version: Bronze G-CuSn10 Shaft: Mechanical seal: AQEGG other mechanical seals on request Single-stage low-pressure centrifugal pump in monobloc design with coupling, coupling protection, motor and baseplate Mechanical seal or stuffing box Wilo factory motor or ATB motor Materials: Pump housing: EN-GJL-250 Impeller: EN-GJL-250 Shaft: Single-stage, horizontal centrifugal pump with axial suction connection and radial pressure upwards-facing pressure connection Dimensions and hydraulic output as per EN733 Hydraulics from cast iron (ML) or stainless steel (MX) depending on version. Sealed by uncooled mechanical seal Version with or without spacer coupling 2 or 4-pole IEC standard rotor Baseplate made from steel or cast iron Delivered as complete unit (pump, coupling, coupling protection, motor and baseplate) or without motor or only pump with free shaft end Single-stage, horizontal centrifugal pump with axial suction connection and radial pressure upwards-facing pressure connection Dimensions and hydraulic output as per EN Special self-cooling design allows for use of an uncooled shaft seal. Additional or external cooling device not required. Hydraulics in spheroidal cast iron EN GS400 (MG version) flange version in accordance with EN Version with or without spacer coupling 2 or 4-pole IEC standard motor 50 Hz Baseplate made from steel or cast iron Delivered as complete unit (pump, coupling, coupling protection, motor and baseplate) or without motor or only pump with free shaft end High-efficiency motors as standard; from 0.75 kw nominal motor power motors with IE2 technology Meets user requirements due to performance and main dimensions in accordance with EN 733 Long motor life due to standard condensate drainage holes in the motor housing Corrosion protection due to cataphoretic coating High-efficiency motors as standard; from 0.75 kw nominal motor power motors with IE2 technology Other materials and versions on request Impeller diameter is adjusted to the dutypoint as appropriate Many model options for shaft seal 60 Hz or ATEX version on request Impeller diameter is adjusted to the dutypoint as appropriate 60 Hz or ATEX version on request Documentation on request Documentation on request

55 Industry Industry processes Industry processes Industry processes Norm pumps according to EN733 NFCH Line-shaft pump Norma V Line-shaft pump MMI 50 V Single-stage low-pressure centrifugal pump mounted on a baseplate Single-stage line-shaft pump with pump hydraulics as per EN733 Multistage line-shaft pump For pumping mineral or synthetic heat carrying fluids up to 350 C, e.g.: in industrial processes or for power generation For pumping clean or lightly contaminated fluids in industrial processes and in sewage treatment as well as for transporting light-duty mineral oil products. For installation in tanks, vessels, rainwater storage tanks and sumps For pumping clean or slightly contaminated water within industrial processes or water purification. Ideal in situations where no installation space is available. For installation in tanks, vessels, rainwater storage tanks and sumps m³/h 200 m³/h 30 m³/h 90 m Permissible temperature range up to +350 C, dependent on max. operating pressure: 0 C C (16 bar) 120 C 300 C (13 bar) 300 C C (16 bar) Nominal diameter on pressure side DN 32 to DN 125 Max. operating pressure PN m Permissible temperature range up to +120 C Nominal diameter on pressure side DN 32 to DN 100 Max. operating pressure PN16 Mains connection 3~400 V, 50 Hz Max. viscosity 150 cst 180 m Permissible temperature range -20 C to +120 C Nominal diameter on pressure side DN 32 to DN 100 Max. operating pressure PN10 or PN16 Mains connection 3~400 V, 50 Hz Max. viscosity 150 cst Single-stage, horizontal centrifugal pump with axial suction connection and radial pressure upwards-facing pressure connection Dimensions and hydraulic output as per EN 733 Self-cooling design with double temperature barrier allows the use of an uncooled shaft seal, reducing heat loss. Standard mechanical seal corresponding to heat carrier medium Version with or without spacer coupling 2 or 4-pole IEC standard motor 50 Hz Delivered as complete unit (pump, coupling, coupling protection, motor and baseplate) or without motor or only pump with free shaft end Single-stage pipe housing pump, pressure chamber Axial suction Connection on pressure side above or optionally also below the connection plate Flange version in PN 10/16/25 Ground versions: VCS : adjustable base and fixed coupling VEM : Cast iron support and fixed coupling VTM : Bearing block and semi-elastic coupling IEC motor B14/V1, 1450 or /min (60 Hz on request) Optional: explosion-proof float switch; Optional: external lubrication of bearing or lubrication provided by fluid (default) VCS : adjustable base and fixed coupling: VEM : Cast iron support and fixed coupling VTM : Bearing block and semi-elastic coupling VTMRI : Bearing block and semi-elastic coupling with internal flow (shaft seal) for small installation spaces VRI : Cast iron support, fixed coupling and internal flow (shaft seal) for small installation spaces Impeller diameter is adjusted to the dutypoint as appropriate 60 Hz or ATEX version on request Low maintenance No shaft sealing Noise-free suction Replaceable IEC standard motor Semi-elastic coupling with the VTM version Low maintenance No mechanical shaft seal Noise-free suction Replaceable IEC standard motor Semi-elastic coupling with the VTM version Internal seal for pressure side and mechanical shaft seal in versions VTMRI and VRI All parts in contact with fluid are made of stainless steel for high pressure applications Documentation on request Documentation on request Documentation on request

56 Industry Industry processes Industry processes, water supply Industry processes, water supply Ring-section pumps RN, HS, IPB, PJ, STD PLURO, FG/FH Axially split case pumps Wilo-SCP Vertical turbine pumps VMF, CNE, VAF Multistage high-pressure multistage centrifugal pump in sectional construction mounted on a baseplate Low-pressure centrifugal pump with axially split housing mounted on a baseplate Dry installed vertical turbine pumps with immersed axial or semi-axial hydraulics For industrial use in high-pressure applications, such as: Metal industry Mine drainage Desalination plants Boiler supply Fire extinguisher supply High-pressure cleaning 1000 m³/h 1800 m Perm. temperature range up to +80 C or +160 C on request Max. operating pressure 180 bar Nominal diameter on pressure side DN 32 to DN 250 High-pressure multistage centrifugal pump in sectional construction 2 to 15-stage industrial version screwed segments hydraulic axial compensation Shaft seal with mechanical seal or stuffing box Optional with several pressure outlets for e.g.: Fire extinguishing applications 2- or 4-pole 50 Hz motors, 60 Hz on request Delivered as complete unit (pump, coupling, motor on baseplate) or without motor or only pump with free shaft end For pumping heating water in accordance with VDI 2035, water/glycol mixtures, cooling/cold water and process water. For applications in municipal water supply, irrigation, building services, industry, power stations etc. 3,400 m³/h 245 m Perm. temperature range -8 C to +120 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter on suction side DN 65 to DN 500 Nominal diameter on pressure side DN 50 to DN 400 Maximum operating pressure: 16 bar 1- or 2-stage, low-pressure centrifugal pump in monobloc design Delivered as complete unit (pump with coupling, coupling protection, motor and baseplate) or without motor or only pump hydraulics Shaft seal with mechanical seal or stuffing box 4- pole and 6-pole motors Materials: Pump housing: EN-GJL-250 Impeller: G-CuSn 10 Shaft: X12Cr13 For industrial or municipal water supply and Irrigation Fire-extinguishing water supply Cooling water supply Drainage and high water protection m³/h 450 m Perm. temperature range 80 C to 105 C Nominal diameter DN 100 to DN 2000 For installation types with pressure ports for underground, above-ground or twinroof installation --as removable or permanent installation -- with axial or semi-axial, single or multistage hydraulics --with open shaft for bearing lubrication with the fluid or with shaft trim for separate bearing lubrication Drive options: Electric motor, Diesel motor or steam turbine Modular design ensures pump model with variety of materials and versions which can be adapted to meet customer demands precisely Hydraulic pressure compensation relieves load on bearings and ensures a longer lifetime. Several optional pressure connections allow you different pressures to be supplied from a single pump. Higher capacities up to 17,000 m³/h on request Special motors and other materials on request Minimum surface area needed High hydraulic efficiency immersed pump hydraulics to order as per customer specifications Documentation on request Documentation on request

57 Industry Heating, air-conditioning, cooling, Industrial circulation systems Heating, air-conditioning, cooling, Industrial circulation systems Heating, air-conditioning, cooling, Industrial circulation systems Heating, air-conditioning, cooling, Industrial circulation systems extension! Glanded high-efficiency pumps in in-line design Wilo-Statos GIGA Glanded energy-saving pumps in in-line design Wilo-VeroLine-IP-E Wilo-VeroTwin-DP-E Glanded energy-saving pumps in in-line design Wilo-CronoLine-IL-E Wilo-CronoTwin-DL-E Glanded standard pumps in in-line design Wilo-VeroLine-IPL Wilo-VeroTwin-DPL High-efficiency inline pump with EC motor and electronic duty adaptation in glanded construction. Version as singlestage low-pressure centrifugal pump with flange connection and mechanical shaft seal. Pumping of heating water (acc. to VDI 2035), cold water and water/glycol mixtures without abrasive substances in heating, cold water and cooling systems. Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems Electronically controlled glanded pump in in-line design with flange connection and automatic power adjustment For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems Glanded pump in in-line design with threaded connection or flange connection For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems m³/h 170 m³/h 680 m³/h 240 m³/h 52 m Permitted temperature range of the fluid -20 C to +140 C Mains connection: 3~400 V (±10 %), 50/60 Hz; 3~380 V (-5 %/+10 %), 50/60 Hz Protection class IP 55 Max. operating pressure 16 bar to +120 C, 13 bar to +140 C 30 m Permissible temperature range -20 C to +120 C Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz Protection class IP 55 Nominal diameter DN 32 to DN 80 Max. operating pressure 10 bar (special version: 16 bar) 65 m Permissible temperature range -20 C to +140 C Mains connection: 3~400 V, 50 Hz; 3~380 V, 60 Hz Protection class IP 55 Nominal diameter DN 40 to DN 80 Max. operating pressure 16 bar 52 m Perm. temperature range -20 C to +120 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter Rp 1 to DN 100 Max. operating pressure 10 bar (special version: 16 bar) Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection Lantern Coupling EC motor with electronic power adjustment Materials: Pump housing and lantern: EN-GJL-250 Impeller: PPS-GF40 Shaft: Mechanical seal: AQ1EGG Other mechanical seals:on request Innovative high-efficiency pump for the highest overall degrees of efficiency based on a new Wilo glanded design High-efficiency EC motor (degrees of efficiency above IE4 limit values acc. to IEC TS Ed.1) New hydraulics optimally adapted to the EC motor technology Integrated electronic power adjustment Extremely compact and space-saving design Simple operation by tried-and-tested red-button technology and display Various control modes Δp-c, Δp-v, PID and n-const. (control mode) Control range up to three times greater than in conventional electronically controlled pumps Analogue interfaces 0-10 V, 2-10 V, 0-20 ma, 4-20 ma Optional interfaces for bus communication using plug-in IF-Modules Integrated dual-pump management with efficiency-optimised peak-load cut-in Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection Engine with integrated electronic power adjustment DP-E with switchover valve Materials: Pump housing and lantern: EN-GJL-250 Impeller: PPO-GF30 Shaft: Mechanical seal: AQEGG Other mechanical seals: on request High-efficiency motors as standard; from 0.75 kw nominal motor power: motors with IE2 technology Energy savings due to integrated electronic power control Simple operation with red-button technology and display Various control modes Δp-c, Δp-v, PID and n-const. (control mode) Analogue interfaces 0-10 V, 2-10 V, 0-20 ma, 4-20 ma Optional interfaces for bus communication using plug-in IF-Modules Integrated dual pump management Integrated full motor protection (PTC thermistor sensor) with trip electronics Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection Lantern Coupling Engine with integrated electronic power adjustment DL-E with switchover valve Materials: Pump housing and lantern: EN-GJL-250 Impeller: Standard version: EN-GJL200 special version: G-CuSn 10 Shaft: Mechanical seal: AQEGG Other mechanical seals: on request Motors with IE2 technology for higher efficiency fitted as standard Energy savings due to integrated electronic power control Simple operation with red-button technology and display Various control modes Δp-c, Δp-v, PID and n-const. (control mode) Analogue interfaces 0-10 V, 2-10 V, 0-20 ma, 4-20 ma Optional interfaces for bus communication using plug-in IF-Modules Integrated dual pump management Integrated full motor protection (PTC thermistor sensor) with trip electronics Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal For flange connection with pressure measuring connection R 1/8 Motor with one-piece shaft DPL with switchover valve Materials: Pump housing and lantern: EN-GJL-250 Impeller: PPO fibreglass-reinforced EN-GJL-200 (depending on pump type) Shaft: Mechanical seal: AQEGG; other mechanical seals on request High-efficiency motors as standard; from 0.75 kw nominal motor power: motors with IE2 technology Standard condensate drainage holes in the motor housings and lanterns version: Motor with one-piece shaft Version N: Standard motor B5 or V1 with stainless steel plug shaft Bidirectional mechanical seal with forced flushing Easy to install due to feet with threaded holes on pump housing Building Services catalogue, Heating, Air-Conditioning, Cooling We are continually adding to this series. Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling

58 Industry Heating, air-conditioning, cooling, Industrial circulation systems Heating, air-conditioning, cooling, Industrial circulation systems Heating, air-conditioning, cooling, Industrial circulation systems Heating, air-conditioning, cooling, Industrial circulation systems Glanded standard pumps in in-line design Wilo-CronoLine-IL Wilo-CronoTwin-DL Special glanded pumps in in-line design Wilo-VeroLine-IPH-W Wilo-VeroLine-IPH-O Special glanded pumps in in-line design Wilo-VeroLine-IPS Glanded monobloc pumps Wilo-BAC Glanded pump in in-line design with flange connection Glanded pump in in-line design with flange connection Glanded pump in in-line design with threaded connection or flange connection Glanded pump in monobloc design with threaded connection or Victaulic connection For pumping water-glycol mixtures with 20 to 40 % For pumping heating water (in accordance with VDI 2035), water-glycol mixtures and cooling and cold water without abrasive substances in heating, cold water and cooling water systems IPH-W: For pumping hot water without abrasive matter in closed industrial circulation systems, district heating, closed heating systems, etc. IPH-O: For pumping heat transfer oil in closed industrial circulation systems 80 m³/h For pumping cold and hot water (in accordance with VDI 2035) without abrasive substances in heating, cold water and cooling water systems m³/h 13 m³/h 80 m³/h 110 m Perm. temperature range -20 C to +140 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter DN 32 to DN 250 Max. operating pressure 16 bar (25 bar on request) 38 m Permissible temperature range IPH-W: -10 C to +210 C (at a max. of 23 bar) Permissible temperature range IPH-O: -10 C to +350 C (at a max. 9 bar) Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter DN 20 to DN 80 3 m Perm. temperature range -10 C to +140 C Mains connection 3~400 V, 50 Hz Protection class IP 55 Nominal diameter Rp 1, DN 40 and DN 50 Max. operating pressure 10 bar or 6 bar for flange connection 25 m Perm. temperature range -15 C to +60 C Mains connection 3~400 V, 50 Hz Protection class IP 54 Nominal diameter G2/G 1½ (only BAC 40 ) or Victaulic connection 60.3/48.3 mm (BAC 40 ) 73.0/73.0 mm (BAC 70 ) Max. operating pressure 6 bar Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection with pressure measuring connection R 1/8 Lantern Coupling IEC standard motor DL with switchover valve Materials: Pump housing and lantern: Standard version: EN-GJL-250 Optional: Spheroidal cast iron EN-GJS LT Impeller: Standard: EN-GJL200 Special version: Red brass G-CuSn 10 Shaft: Mechanical seal: AQEGG Other mechanical seals: on request Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal Flange connection Lantern Motor with special shaft Single-stage, low-pressure centrifugal pump in in-line design with Mechanical seal or stuffing box Threaded or flange connection with pressure measuring connection R 1/8 Standard motor Materials: Pump housing and lantern: EN-GJL-200 Impeller: Plastic Shaft: Mechanical seal: BVEGG Other mechanical seals on request Single-stage low-pressure centrifugal pump in monobloc design, with axial suction port and radially arranged pressure port Materials Pump housing: PA % GF Impeller: PA/PPO, fibreglass-reinforced Shaft: X30Cr13 Mechanical seal: BQEGG High-efficiency motors as standard; from 0.75 kw nominal motor power: motors with IE2 technology Reduced life cycle costs due to optimised efficiency Standard condensate drainage holes in the motor housings Can be used flexibly in air-conditioning and cooling systems, with application benefits due direct draining of condensate via optimised lantern design (patented) Bidirectional mechanical seal with forced flushing High worldwide availability of standard motors (according to Wilo specifications) and standard mechanical seals Easy to install due to feet with threaded holes on pump housing Motors with IE2 technology for higher efficiency fitted as standard Bidirectional, self-cooled mechanical seal Great variety of applications by a large fluid temperature range without additional wearing parts Worldwide availability of the standard motors used Reduced life cycle costs due to optimised efficiency Pump housing in plastic design Version with Victaulic or threaded connection (BAC 70/ with Victaulic connection only) Building Services catalogue, Heating, Air-Conditioning, Cooling

59 APPLIES TO EUROPEAN DIRECTIVE FOR ENERGY RELATED PRODUCTS Industry Heating, air-conditioning, cooling, Industrial circulation systems Heating, air-conditioning, cooling, Industrial circulation systems Glandless high-efficiency pumps Wilo-Stratos Wilo-Stratos-D Glandless standard pumps Wilo-TOP-S Wilo-TOP-SD Glandless circulation pump with threaded connection or flange connection, EC motor and automatic power adjustment. Hot-water heating systems of all kinds, air-conditioning systems, closed cooling circuits, industrial circulation systems Glandless circulation pump with threaded connection or flange connection. Hot-water heating systems of all kinds, industrial circulation systems, cold water systems and air-conditioning systems m³/h 13 m Perm. temperature range -10 C to +110 C Mains connection 1~230 V, 50 Hz Protection class IP 44 Nominal diameter Rp 1 to DN 100 Max. operating pressure screw-end pumps 10 bar Flange-end pumps 6/10 bar / 6 bar (special version: 10 bar or 16 bar) EC motor Pre-selectable control modes p-c, p-v, p-t Automatic setback operation for additional savings potential Dual pump management Red-button technology for simple operation Graphical pump display with rotating display Remote control via infrared interface (IR-Module/IR-Monitor) Integrated motor protection System expansion by means of retrofittable interface modules for communication: Modbus, BACnet, CAN, LON, PLR etc. Pump housing with cataphoretic coating Combination flanges PN 6/PN 10 (for DN 32 to DN 65) Thermal insulation shells as standard for heating applications Energy efficiency class A Up to 80 % electricity savings over circulation pumps without speed control Highest degrees of efficiency due to ECM technology For other standard circulation pump, see also pages 10 and m³/h 19 m Perm. temperature range -20 C to +130 C In short-term operation (2 h) up to +140 C For use with Wilo-Protect-Module-C: -20 C to +110 C Mains connection: --1~230 V, 50 Hz (depending on type) --3~400 V, 50 Hz --3~230 V, 50 Hz (with optional switching plug) Protection class IP 44 Nominal diameter Rp 1 to DN 100 Max. operating pressure screw-end pumps 10 bar flange-end pumps 6/10 bar or 6 bar (special version: 10 bar or 16 bar) Preselectable speed stages for power adjustment Combination flange PN 6/PN 10 (DN 40 to DN 65) Pump housing with cataphoretic coating Thermal insulation shells as standard for heating applications Extendable motor protection, signal and display functions Cable lead-in on both sides for easy installation Pump communication in simple and safe retrofit plug-in technology Easy installation due to combination flanges up to nominal diameter DN 65 For other standard circulation pump, see also pages 11 and 17 Building Services catalogue, Heating, Air-Conditioning, Cooling Building Services catalogue, Heating, Air-Conditioning, Cooling

60 Industry, fire water supply extension extension Submersible pumps Wilo-Sub TWI 4 Wilo-Sub TWI 6 Wilo-Sub TWI 8 Wilo-Sub TWI 10 Submersible pumps Wilo-EMU 6" series Wilo-EMU 8" series Wilo-EMU 10" 24 series Submersible pumps Wilo-EMU bottom intake pumps Sprinkler pumps with VdS approval Wilo-EMU sprinkler pumps Submersible pump, multistage Submersible pump with sectional construction Water and potable water supply from boreholes and cisterns; process water supply; municipal and industrial water supply; sprinkling and irrigation; pressure boosting; lowering the water level; utilisation of geothermal energy and offshore applications; supplying fountains, snow cannons and water organs 2400 m³/h Submersible bottom intake pump Sprinkler pump in sectional design Water and potable water supply from boreholes and cisterns; process water supply; municipal and industrial water supply; sprinkling and irrigation; pressure boosting; lowering the water level; for pumping water without long-fibre and abrasive constituents Potable and process water from tanks or shallow bodies of water; municipal and industrial water supply; sprinkling and irrigation; lowering the water level; utilisation of geothermal energy and offshore applications; For supplying sprinkler systems 165 m³/h m³/h 580 m³/h 500 m Mains connection: 1~230 V, 50 Hz (only TWI 4 ) or 3~400 V, 50 Hz Immersed operating mode: S1 Fluid temperature: 3-20 C or 3-30 C Min. flow at motor: m/s Max. sand content: 50 g/m³ Up to starts per hour Max. immersion depth: m 560 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: C Min. flow at motor: m/s Max. sand content: 35 g/m³ Up to 10 starts per hour Max. immersion depth: 100 or 300/350 % Control range for frequency converter: or Hz 160 m Mains connection: 3~400 V, 50 Hz Max. fluid temperature: 20 C Min. flow at outside shroud: not necessary Max. sand content: 35 g/m³ Up to 10 starts per hour Max. immersion depth: 300 m Control range for frequency converter: --2-pole: Hz --4-pole: Hz 140 m Mains connection: 3~400 V/50 Hz Immersed operating mode: S1 Max. fluid temperature: 25 C, higher temperatures on request Min. flow at motor: 0.1 m/s Max. sand content: 35 g/m³ Up to 10 starts per hour Max. immersion depth: --NU 611 = 100 m --Other motors = 300 m Multistage submersible pump with radial or semi-axial impellers Integrated non-return valve NEMA coupling AC-(only TWI 4) or three phase motor Hermetically sealed or rewindable (TWI 6 / TWI 8 / TWI 10...) motors Immersible, multistage submersible pump Radial or semi-axial impellers Hydraulics and motor freely configurable according to power requirements Integrated non-return valve (depending on type) NEMA coupling or standardised connection (from 10" motors on) Three-phase motor for direct or stardelta start. Immersible, multistage submersible pump Semi-axial impellers Hydraulics and motor freely configurable according to power requirements Three-phase motor for direct or stardelta start. Motors rewindable as standard Immersible, multistage submersible pump Radial or semi-axial impellers NEMA coupling (depending on type) Three-phase motor for direct or stardelta start. Rewindable motors Unit made completely of stainless steel Integrated non-return valve Vertical and horizontal installation possible Standard and configurable versions available (TWI 6 / TWI 8 / TWI 10...) Star-delta version Rewindable motors Water pumping with large volume flows Corrosion-resistant impellers Wear-resistant GI bushing (depending on type) Special materials possible Individual adjustment to duty point due to impeller correction 4-pole motors for long service life and high degree of efficiency Motors with CoolAct technology for high power density (from 10" motors on) High voltage up to 6000 V possible Vertical and horizontal installation possible Ceram CT coating possible to increase effectiveness Pressure shroud installation possible Deep water lowering Self-cooling design Easy installation on the ascending pipe Wear-resistant design due to different material versions Compact design Rewindable motors Individual adjustment to duty point due to impeller correction Ceram CT coating possible to increase effectiveness VdS certification Certified non-return valve available as accessory Version in bronze material Pressure shroud installation possible Vertical and horizontal installation possible

61 Industry extension extension modification extension Vertical, multistage centrifugal pumps Wilo-Helix-V Vertical, multistage centrifugal pumps Wilo-Helix-VE Vertical, multistage centrifugal pumps Wilo-Multivert MVI Vertical, multistage centrifugal pumps Wilo-Multivert-MVIE Non-self-priming multistage pump Non-self-priming multistage pump with integrated frequency converter and pressure boosting Industrial circulation systems Process water Cooling water circulation systems Washing systems Irrigation Non-self-priming multistage pump Non-self-priming multistage pump with integrated frequency converter and pressure boosting Industrial circulation systems Process engineering Cooling water circulation systems Washing and sprinkling systems and pressure boosting Industrial circulation systems Process water Cooling water circulation systems Fire extinguishing systems Washing systems Irrigation and pressure boosting Fire extinguishing systems Boiler feed Industrial circulation systems Process engineering Cooling water circulation systems Washing and sprinkling systems m³/h 45 m³/h 155 m³/h 145 m³/h 250 m Fluid temperature -30 to +120 C Operating pressure max. 16/25 bar Inlet pressure max. 10 bar Protection class IP 55 PN 16 and PN 25 with loose round flanges 234 m Fluid temperature -20 to +120 C Operating pressure max. 16/25 bar Inlet pressure max. 10 bar Protection class IP 55 PN 16 and PN 25 with loose round flanges 240 m Fluid temperature -15 to +120 C Operating pressure max. 16/25 bar Inlet pressure max. 10 bar Protection class IP m Fluid temperature -15 to +120 C Operating pressure max. 16 bar/25 bar Inlet pressure max. 6 bar Protection class IP 54 or IP 55 Impellers, stage chambers and pump housing stainless steel / (AISI304L/AISI316L) Versions with 1.44xx stainless steel designed for aggressive fluids Versions --PN16 with oval flanges and PN25 with round DIN flanges --Helix V22, 32, 52 PN16 and PN25 with round loose flanges as per ISO 2531 and ISO 7005 IE2/IEC standard three-phase AC motor Impellers, stage chambers and pump housing stainless steel / (AISI304L/AISI316L) Versions with 1.44xx stainless steel designed for aggressive fluids PN16 and PN25 version with round loose flanges as per ISO 2531 and ISO 7005 IE2/IEC standard three-phase AC motor Integrated frequency converter Stainless steel pump in in-line design Versions --MVI 1.. up to PN16 with oval flanges and PN25 with round DIN flanges --MVI 16.. to 95.. PN16/PN25 with round DIN flanges --Victaulic connections (PN25) depending on pump type IE2/IEC standard three phase motor, 2-pole, AC or DC version. Single-phase AC motor with integrated thermal motor protection Stainless steel pump in in-line design PN16 with oval flanges PN16/25 with DIN round flanges, Victaulic connections depending on pump type Single-phase or three-phase current standard motor Integrated frequency converter Integrated thermal motor protection Protection against low water level Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid Efficiency-optimised, laser-welded 2D/3D high-efficiency hydraulics Easy pump replacement without pipe modification. Due to the modular pump housing, Helix pumps can be installed in existing pipes. User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance Potable water approval according to ACS/KTW/WRAS for all parts that come in contact with the fluid MVI All parts that come in contact with the fluid made of stainless steel (AISI 304) or (AISI 316L) MVI 1600 MVI 9500 depending on pump type in stainless steel (AISI 316L) or (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating All relevant components have KTW and WRAS approval Easy commissioning Full motor protection Large control range MVI All parts that come in contact with the fluid made of stainless steel (AISI 304) or (AISI 316L) MVI 1600 MVI 9500 depending on pump type in stainless steel (AISI 316L) or (AISI 304) with pump housing made of grey cast iron EN-GJL-250, cataphoretic coating All relevant components have KTW and WRAS approval

62 Industry Horizontal, multistage centrifugal pumps Wilo-Economy MHIL Vertical, multistage centrifugal pumps Wilo-Multivert MVIL Horizontal, multistage centrifugal pumps Wilo-Economy MHI Horizontal, multistage centrifugal pumps Wilo-Economy MHIE Non-self-priming multistage pump Non-self-priming multistage pump Non-self-priming multistage pump Non-self-priming multistage pump with integrated frequency converter and pressure boosting Commerce and industry Washing and spraying systems Rainwater utilisation Cooling and cold water circulation systems and pressure boosting Commerce and industry Washing and spraying systems Rainwater utilisation Cooling and cold water circulation systems and pressure boosting Commerce and industry Cooling water circulation systems Washing and sprinkling systems and pressure boosting Industrial circulation systems Process engineering Cooling water circulation systems Washing and sprinkling systems 13 m³/h 13 m³/h 25 m³/h 30 m³/h 68 m Fluid temperature -15 to +90 C Operating pressure max. 10 bar Inlet pressure max. 6 bar Protection class IP m Fluid temperature -15 to +90 C Operating pressure max. 10 bar Max. inlet pressure 6 bar Protection class IP m Fluid temperature -15 to +110 C Operating pressure max. 10 bar Inlet pressure max. 6 bar Protection class IP m Fluid temperature -15 to +110 C Operating pressure max. 10 bar Inlet pressure max. 6 bar Protection class IP 54 Pump in monobloc design Threaded connection Single-phase or three-phase AC motor Single-phase AC motor with integrated thermal motor protection Pump in in-line design Oval flange Single-phase or three-phase AC motor Single-phase AC motor with integrated thermal motor protection Stainless steel pump in monobloc design Threaded connection Single-phase or three-phase AC motor Single-phase AC motor with integrated thermal motor protection Stainless steel in monobloc design Threaded connection Integrated frequency converter Single-phase or three-phase AC motor Three-phase version with red-button technology and LCD display for state indication Integrated thermal motor protection Impellers and stage chambers made of stainless steel (AISI 304) Pump housing made of grey cast iron EN-GJL-250, cataphoretic coating All relevant components have KTW and WRAS approval Impellers and stage chambers made of stainless steel (AISI 304) Pump housing made of grey cast iron EN-GJL-250, cataphoretic coating All relevant components have KTW and WRAS approval All parts that come in contact with the fluid are made of stainless steel (AISI 304) or (AISI 316) Compact design All relevant components have KTW and WRAS approval Easy commissioning All parts that come in contact with the fluid are made of stainless steel (AISI 304) or (AISI 316L) Compact design Integrated frequency converter Full motor protection All relevant components have KTW and WRAS approval

63 Industry extension: COR-1 MVIE 32../ COR Helix VE -GE modification Single-pump pressure boosting system with system separation Wilo-Economy CO/T-1 MVI /ER Single-pump pressure boosting systems Wilo-Economy CO-1 MVIS /ER Wilo-Economy CO-1 MVI /ER Wilo-Economy CO-1 Helix-V /CE Single-pump pressure boosting systems with speed-controlled pump Wilo-Comfort-N-Vario COR-1 MVISE Wilo-Comfort-Vario COR-1 MVIE Wilo-Comfort-Vario COR-1 Helix-VE Multi-pump pressure boosting systems Wilo-Economy CO 2-4 MHI /ER Wilo-Comfort-N-CO 2-6 MVIS /CC Wilo-Comfort-CO 2-6 MVI /CC Wilo-Comfort-CO 2-6 Helix-V /CC systems with system separation and a non-self-priming, highpressure multistage centrifugal pump Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump Water-supply units with a non-selfpriming, high-pressure multistage centrifugal pump with integrated speed control For fully automatic water supply in inlet mode from the public water supply network or from a break tank For pumping potable water, process water, cooling water, water for firefighting or other service water Pressure boosting system with 2 to 6 non-self-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems For pumping potable water and process water, cooling water, water for firefighting or other service water For fully automatic water supply in inlet mode from the public water supply network For pumping potable water and process water, cooling water, water for firefighting or other service water For fully automatic water supply in inlet mode from the public water supply network or from a break tank For pumping potable water, process water, cooling water, water for firefighting or other service water 63 8 m³/h 135 m³/h 97 m³/h 800 m³/h 110 m Mains connection 3~230 V / 400 V, 50 Hz (other versions on request) Fluid temperature max. 50 C Operating pressure 16 bar Inlet pressure 6 bar Protection class IP m Mains connection 3~230 V / 400 V, 50 Hz (other versions on request) Fluid temperature max. 50 C Operating pressure 16 bar Inlet pressure 6 bar Switching pressure stages 6 / 10 / 16 bar Protection class IP m Mains connection 3~400 V, 50 Hz Fluid temperature max. 50 C Operating pressure 16 bar Inlet pressure 6 bar Protection class IP m Mains connection 3~230 V / 400 V, 50 Hz Fluid temperature max. 50 C Operating pressure 10 bar or 16 bar Inlet pressure 6 bar Protection class IP 54 1 pump of MVI series PE preliminary tank, atmospherically ventilated (120 l) Components that come in contact with fluid are corrosion-resistant Pipework in stainless steel Check valve, on pressure side Non-return valve, on pressure side Preliminary tank including float valve and float switch Diaphragm pressure vessel 8 l, PN 16, on pressure side Low-water cut-out switchgear 1 pump of the MVIS, MVI or Helix-V series Components that come in contact with fluid are corrosion-resistant Base frame made of stainless steel with height-adjustable vibration damper for insulation against structureborne noise Pipework in stainless steel Check valve, on pressure side Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side 1 pump of the MVIE, Helix-VE or MVISE series with integrated frequency converter All parts that come in contact with the fluid are corrosion-resistant Pipework in stainless steel Check valve, on pressure side Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16 2 to 4 or 2 to 6 pumps per system Components that come in contact with fluid are corrosion-resistant Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise Pipework in stainless steel Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side Pressure sensor, on discharge side Compact system, ready for connection, for all applications that require system separation Operationally reliable due to the combination of the MVI pump series with the ER-1 control unit For systems with MVIS pump Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump Up to 20 db (A) quieter than conventional systems with comparable hydraulic output Operationally reliable due to the combination with the ER-1 control device For systems with Helix-V pump IE2 standard motors Efficiency-optimised, laser-welded 2D/3D hydraulics User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance Operationally reliable due to the combination CE control device For systems with MVISE pump Virtually noiseless system due to the use of glandless, stainless steel, highpressure, multistage centrifugal pumps with integrated frequency converter Up to 20 db[a] quieter than conventional systems with comparable hydraulic output For systems with Helix-VE pump IE2 standard motors Efficiency-optimised, laser-welded 2D/3D hydraulics User-friendly mechanical seal with cartridge, equipped with a standard seal for easy maintenance Compact system in accordance with the requirements of DIN to 4 or 2 to 6 high-pressure, multistage centrifugal pumps switched in parallel Easily adjustable and operationally reliable due to integrated control devices with Helix-V with IE2 motors For systems with MVIS pumps Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump Up to 20 db (A) quieter than conventional systems with comparable hydraulic output

64 Industry, fire water supply modification extension: COR2-4 MVIE 32../52.. COR2-4 Helix VE /VR Multi-pump pressure boosting systems with speed control Wilo-Comfort-N-COR 2-6 MVIS /CC Wilo-Comfort-COR 2-6 MVI /CC Wilo-Comfort-COR2-6 Helix-V /CC Multi-pump pressure boosting systems with speed controlled pumps Wilo-Comfort-Vario-COR 2-4 MHIE /VR Wilo-Comfort-N-Vario-COR 2-4 MVISE /VR Wilo-Comfort-Vario-COR 2-4 MVIE /VR Wilo-Comfort-Vario COR2-4 Helix-VE Multi-pump pressure boosting systems Wilo-FLA Submersible drainage pumps Wilo-Drain TMT Wilo-Drain TMC Pressure boosting system with speed control and 2 to 6 non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel Pressure boosting system with 2 to 4 non-self-priming, stainless steel, highpressure, multistage centrifugal pumps switched in parallel, with integrated speed control For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems For pumping potable water and process water, cooling water, water for firefighting or other service water Pressure boosting system for fire extinguisher applications with 1 to 2 autonomous working, non-self-priming, stainless steel, high-pressure, multistage centrifugal pumps switched in parallel For supply of fire extinguisher water from fire hose reels according to DIN from 04/2009 Submersible drainage pumps For fully automatic water supply and pressure boosting in residential, commercial and public buildings, hotels, hospitals, department stores and for industrial systems For pumping potable water and process water, cooling water, water for firefighting or other service water For industrial applications, e.g. for condensate, hot water and aggressive fluids. 800 m³/h 560 m³/h 80 m³/h 22 m³/h 160 m Mains connection 3~230 / 400 V, 50 Hz Fluid temperature max. 50 C Operating pressure 16 bar Inlet pressure 6 bar Protection class IP m Mains connection 3~400 V, 50 / 60 Hz, depending on type also 1~230 V, 50/60 Hz Fluid temperature max. 70 C Operating pressure 10 bar Inlet pressure 6 bar Protection class IP m Mains connection 3~230/400 V, 50 Hz Fluid temperature max. 50 C Max. operating pressure 16 bar Inlet pressure 6 bar Protection class IP m Mains connection 3~400 V, 50 Hz Protection class IP 68 Submersion depth max. 5 m Fluid temperature 95 C, 65 C non-immersed Cable length 10 m Free ball passage 10 mm Pressure port, depending on type Rp 1¼ or Rp 1½ 2 to 6 pumps per system Continuous control operation of the base-load pump via frequency converter integrated in the CC controller Components that come in contact with fluid are corrosion-resistant Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise Pipework in stainless steel Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side Pressure sensor, on discharge side 2 to 4 pumps per system Continuous control operation due to pumps with integrated frequency converters Components that come in contact with fluid are corrosion-resistant Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise Pipework in stainless steel Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side Pressure sensor, on discharge side 1 to 2 pumps per system Components that come in contact with fluid are corrosion-resistant Galvanised base frame with heightadjustable vibration damper for insulation against structure-borne noise Pipework in stainless steel Gear-operated shut-off ball cock/ annular shut-off valve on every pump, on suction and pressure sides Non-return valve, on pressure side Diaphragm pressure vessel 8 l, PN 16, on pressure side Pressure sensor, on discharge side Comes as standard with pump protection by means of minimum volume acceptance via bypass switch without auxiliary energy. Pump housing and impeller made of grey cast iron, bronze or stainless steel, depending on version Easy-to-use system in accordance with all requirements of DIN to 6 vertical high-pressure multistage centrifugal pumps switched in parallel Speed-controlled base-load pump with Helix-V with IE2 motors For systems with MVIS pumps Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump Up to 20 db (A) quieter than conventional systems with comparable hydraulic output Compact system with excellent value for money due high-pressure, multistage centrifugal pumps with integrated frequency converters Superproportionally large control range Integrated full motor protection via PTC Integrated dry-running detection with automatic cut-out in event of low water via performance characteristics of the motor control electronics with Helix-V with IE2 motors For systems with MVISE pumps Virtually noiseless system due to a glandless, high-pressure, multistage centrifugal pump Up to 20 db (A) quieter than conventional systems with comparable hydraulic output Compact system in accordance with all requirements of DIN or 2 high-pressure multistage centrifugal pumps Helix V series with IE2 motors Variants --Single-pump system --Twin-pump system with two independent single-pump systems in a base frame Comes as standard with pump protection by means of minimum volume acceptance via bypass switch without auxiliary energy. High temperature resistance Also suitable for aggressive fluids Documentation on request

65 Industry extension modification extension extension Submersible sewage pumps Wilo-Drain TP 80 Wilo-Drain TP 100 Wilo-Drain TP...-AM Submersible sewage pumps Wilo-EMU FA 05 to FA 15 Wilo-EMU Uniprop without gear TR 22 to TR 40 Wilo-EMU Maxi-/Megaprop with gear TR 216 to TR 226 TR 316 to TR 326 TRE 221/TRE 321 with IE3 motor Submersible sewage pump for industrial applications Submersible sewage pumps Compact directly driven submersible mixer Slow-running submersible mixer with two-stage planetary gear For pumping heavily contaminated fluids, for environmental and water treatment technology and industrial and process engineering For pumping sewage with solid constituents in water treatment systems and pumping stations; local drainage, water control and process water extraction; applications in construction and industry Swirling of deposits and solids in rain spillway basin and pump sump; destruction of floating sludge layers; other areas of application in agriculture and water supply Energy-optimised mixing and circulation of activated sludge; generation of flow rates in circulation channels; further areas of application in industry m³/h 103 m³/h Thrust: N Thrust: N 21 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 or S3 25% Surfaced operating mode: S1 or S3 25% Insulation class: F Thermal winding monitoring Sealing chamber control Max. fluid temperature: 40 C Free ball passage: 80 or 100 mm Max. immersion depth: 20 m 51 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Surfaced operating mode: S2-15 or S2-30 (depending on type) Thermal motor monitoring Insulation class: F Max. fluid temperature: 40 C Free ball passage of 35 to 100 mm Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: 40 C Mechanical seal with SiC/SiC combination Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Mains connection: 3~400 V, 50 Hz Immersed operating mode: S1 Max. fluid temperature: 40 C Two-stage planetary gear with exchangeable second planetary stage Mechanical seal with SiC/SiC combination Permanently lubricated anti-friction bearing Max. immersion depth: 12.5 m Thermal motor monitoring Sealing chamber monitoring ATEX approval (not for model "AM") Sheath current cooling Model "AM" with float switch, CEE plug and transport frame Heavy-duty version made of cast iron Simple installation via suspension unit or pump base Stationary installation on walls and floors Flexible installation through the use of lowering device Can be swivelled vertically and horizontally for installation with lowering device Installation with stand allows free placement in basin Flexible installation Two-stage planetary gear with exchangeable second planetary stage Stainless steel & composite ATEX approval (not for model "AM") Low weight Detachable connection cable Standard-equipped with cooling jacket Corrosion-resistant (e.g. swimming pool water, salt water, etc.) Operation in stationary and portable wet well installation Submersible Heavy-duty version made of cast iron Easy installation due to suspension unit or pump base Longitudinally watertight cable lead-in ATEX approval Submersible Self-cleaning propeller with helix hub Easy-to-install propeller attachment Propeller in steel or PUR version ATEX and FM versions Submersible 2-stage planetary gear for adjusting the propeller speed Self-cleaning propeller Propeller blades can be replaced individually Easy-to-install blades and hub Propeller in GFK version ATEX and FM versions gear shaft "TRE" type with IE3 performance optimised motors

66 Industry Submersible drainage pumps Wilo-EMU KS Self-priming drainage pumps Wilo-Drain LP Wilo-Drain LPC Self-priming drainage pumps Type S Pedestal pumps Wilo-Drain VC Submersible drainage pumps in rugged design for use on building sites For drainage of excavation pits, cellar areas, pits and basins. Ideally suited for applications in fountains Dry-mounted and self-priming drainage pumps For pumping wastewater with small amounts of solid matter for Excavation pits and ponds Sprinkling / spraying of gardens and green areas Drainage of seepage water Mobile drainage Dry-mounted and self-priming drainage pumps For stationary or mobile pumping of clean or sludgy fluids in the following applications: chemical industry Food industry Wastewater Sludgy or sandy water Seawater or brackish water Vertical drainage pumps For pumping wastewater/fluids up to 95 C From pump sumps With condensate From basements at risk of flooding 340 m³/h 71 m³/h 630 m³/h 17 m³/h 71 m Operating mode S1 Max. fluid temperature 40 C Protection class IP 68 Sealed by double mechanical seal Maintenance-free roller bearing 29 m Mains connection 1~230 V, 50 Hz, 3~400 V, 50 Hz Fluid temperature 3 C to 35 C Free ball passage, depending on type 5 to 12 mm Connection Rp 1½ to G3 50 m Permissible temperature range +5 C to +70/+150 C Free ball passage 20 to 72 mm, depending on type IEC electro, petrol or diesel motor Nominal diameter on pressure side DN 1 1/2840 to DN 200 Max. operating pressure PN16 20 m Mains connection 1~230 V, 50 Hz or 3~400 V, 50 Hz Protection class IP 54 Fluid temperature +5 C to +95 C Free ball passage 5 or 7 mm, depending on type Pressure port, depending on type Rp 1 or Rp 1½ Mechanical seal independent of direction of rotation Heavy-duty motors (oil-filled and dry) ensure permanent operation even with non-immersed motor Corrosion-resistant components Portable self-priming centrifugal pump Single-stage self-priming circulation pump with open impeller Single-stage self-priming circulation pump with open impeller For mobile use with support frame or installed on handcart With IEC motor or optionally with diesel/ petrol engine Optional cutting device Optional external lubrication of mechanical shaft seal Attached float switch Capacitor box (VC 32, 1~ ) Modular material system: Normal cast iron version Wear protection due to ceramic coating Pump components made of Abrasite (chilled cast iron) With Ex protection, depending on type High operational reliability Easy handling Easy operation Quick self-priming up to 7.5 m Free ball passage 75 mm Highly resistant to abrasion thanks to use of easy-to-replace wear plates Highly resistant to abrasion thanks to use of easy-to-replace wear plates Available in cast iron or bronze/stainless steel Version for sea water applications contain zinc anodes in the pump housing Optional cutting device Optional 60 Hz /ATEX versions Long service life Easy commissioning Connection outside the fluid Long downtimes possible Integrated motor protection due to thermal relay and control electrode Documentation on request