2018/19 PRODUCT CATALOGUE

Transcription

1 218/19 PRODUCT CTLOGUE

2 BOUT THE DNTHERM GROUP Control your climate The Dantherm Group is a leading provider of climate control products and solutions. The group companies have more than 6 years of experience in designing and manufacturing high quality and energy efficient equipment for heating, cooling, drying and ventilation for a wide range of mobile and fixed applications. Every year Dantherm Group uses significant resources on product development to stay in the forefront and are constantly adapting the products to changing market demands and legislation. The Dantherm Group has strong brands with well-established market positions in the mobile, pool, coercial/industrial and residential markets. Dantherm Group customers benefit from our comprehensive knowledge base and the experience and expertise that we have gained from more than three million climate control products and solutions sold worldwide. Global reach The Dantherm Group is headquartered in Skive, Denmark and has companies in Norway, Sweden, United Kingdom, Germany, France, Switzerland, Italy, Spain, Poland, Russia, China and United rab Emirates and a global distribution network. In 216 the Dantherm Group was acquired by the Swedish equity fund Procuritas Capital Investors V LP a strong owner with the ambition to continue the development and growth of the company. 2

3 PRODUCT CTLOGUE INDEX MOBILE PORTBLE IR-CONDITIONING COMMERCIL...4 IR-CONDITIONING INDUSTRIL...5 PORTBLE REFRIGERNT DEHUMIDIFIERS CONSTRUCTION ND RENTL...6 INDUSTRIL...7 COMMERCIL & INDUSTRIL WTER HETING IR TO WTER HOT WTER HET PUMPS... 4 WTER HETING WTER TO WTER HOT WTER HET PUMPS IR COOLING ND WTER HETING KITCHEN COOLERS WITH HET RECOVERY WTER COOLING WTER TO IR COMMERCIL POOL POOL WTER HETING IR TO WTER SMLL POOLS... 1 LRGE POOLS POOL WTER HETING ND COOLING DOMESTIC ND COMMERCIL POOL WTER COOLING DOMESTIC ND COMMERCIL DEHUMIDIFIERS WLL MOUNTED HIGH CPCITY DEHUMIDIFIERS FLOOR STNDING DUCTED HIGH TEMPERTURE PROCESS DRYING INDUSTRIL DRYING DSORPTION FREEZER ROOMS... 7 POOL DEHUMIDIFIERS WLL MOUNTED FLOOR STNDING POOL IR HNDLING UNITS 3/ VRIHET SYSTEMS DELT SYSTEMS HRD SYSTEMS

4 PORTBLE IR-CONDITIONING COMMERCIL ccessories CT 7 The hex unit features a speed controlled EC fan (non-uk only) that automatically adjusts to differing outside air temperatures so that the CT 7 is always operating at its best efficiency. dditional 5m or 15m line sets (maximum length 3m per unit) Duct spigot kit Cooling capacity of up to 28/6% RH room, 28 outside air temperature High efficiency cooling circuit Quick connect cooling line connectors provides easy installation, without the need to recharge water lines Compact outdoor heat exchanger Outdoor heat exchanger with automatically adjusting variable speed EC fan, for high and low temperature environments (non- UK only) Variable indoor unit fan speed and adjustable air outlet grille Peristaltic pumped condensate with 3m head and high level alarm Castor mounted, rugged metal construction Up to 3m installation distance between indoor unit and heat rejection unit R47C refrigerant True air-conditioning without the exhaust air gains associated with exhaust tube units Options Forklift guides Specifications Units CT 7 CT 7 (UK) Performance* Cooling capacity 7. (max.) 7. (max.) Power supply V/Hz 23/1ph/5 23/1ph/5 Fuse Nominal running current Nominal power consumption ir flow (variable) m 3 /h Sound 3m db() Operating range (room) o C Operating range (outdoor) o C Product size (h x w x d) 17 x 852 x x 852 x 42 Hex size (h x w x d) 52 x 56 x x 56 x 28 Weight kg * Outside conditions 28/6% RH Rental companies Event organisations Corporate hospitality specialists Data centres and server room cooling Facility management companies Utility companies Retail premises Temporary cold room cooling 4

5 IR-CONDITIONING INDUSTRIL CT 35 High capacity space chiller Rapid installation and flexibility of positioning No external refrigerant connections required No external ventilation or ductwork to exterior required Fully automatic operation Robust construction Ducted cool air when required Ideal for locations requiring a low temperature storage facility KW COOLING (IR) CT 35 M3 1, (SSUMES STD U VLUES FOR PPLICTION) Food packing and process areas Factories and workplaces Industrial processes Warehouses storing perishable goods Emergency back-up for cold stores High capacity cooling for social events ROOM TEMPERTURE Specifications Units CT 35 Power supply Starting current Max. running current Min. generator required Product size (indoor) (w x d x h) Weight Product size (outdoor) (w x d x h) Weight V/Hz KV kg kg /3ph/ x 125 x x 132 x

6 PORTBLE REFRIGERNT DEHUMIDIFIERS CONSTRUCTION ND RENTL PD 3 Robust Easy to use Can be cleaned by jet-wash Operation in temperatures down to 3 hot gas defrost supplied with units Dual voltage units can be supplied with 11/24 volt option Non-marking wheels no tyre marks left on floors Building industry, restoration work Moisture removal in new houses Drying during construction Water removal after painting Options PD 6 Condensate pump kit, humidistat, hours-run meter Specifications Units PD 3 PD 6 Maximum capacity l/24h 53 1 Capacity (2/7% RH) l/24h Capacity (3/8% RH) l/24h 46 7 ir flow m³/h Power supply (X model) V/Hz 23/1ph/5 23/1ph/5 Dual voltage option (JX model) V/Hz 11/23/1ph/5 11/23/1ph/5 Recoended size of dual voltage transformer V 8 14 Recoended supply fuse Nominal power consumption Product size (h x w x d) 85 x 51 x x 63 x 585 Weight kg Note: European version of the Porta-Dry is called a DHM 6

7 REFRIGERNT DEHUMIDIFIERS INDUSTRIL PD 15 Plastisol coated galvanised steel cabinet Self contained with fully automatic operation Integral humidistat Polyester coated evaporator and condenser Usable from 3 Ultra-powerful compressor High lift condensate pump Hot gas defrost for low temperature operation In-built transformer so power supply neutral not required Service-optimised construction for quick cleaning and inspections Suitable for connecting to ducted air systems Easily exchangeable and washable air filter Industrial and coercial Preservation Sewage treatment, waterworks griculture Data centres Specifications Units PD 15 Maximum capacity l/24h 3 Capacity (2/6% RH) l/24h 1 Capacity (3/8% RH) l/24h 22 ir flow m 3 /h 25 Sound 3m db() 58 Supply (no neutral required) V/Hz 4/3ph/5 Power input 2.7 Nominal power consumption 6.75 Recoended fusing 16 Required starting current 3 Recoended room size construction drying m 3 /m 2 17/6 Product size (l x w x h) Weight kg 11 x 7 x

8 THE CHLLENGE To provide a solution to temperature control which will reliably and economically heat or cool a swiing pool, regardless of ambient air temperature and location. Enjoyable swiing The heat pump cycle Dependable swiing pool temperature control is a key feature to enjoyable swiing. HOT GS COMPRESSOR COOL GS For a swim to be refreshing and invigorating the pool water must be the right temperature for the swier, regardless of the influence of seasonal weather. WTER OUT HET EXCHNGER EVPORTOR MBIENT IR Winter heating WTER IN During winter, swiing pools continually evaporate water and radiate heat. The combination of these factors causes heat loss which must be replaced through a heater if comfortable water temperatures are to be maintained. CONDENSED REFRIGERNT HIGH PRESSURE SIDE COLD LIQUID EXPNSION REFRIGERNT VLVE LOW PRESSURE SIDE Suer cooling During suer, swiing pools are subjected to massive solar gain. Coupled with high ambient humidities which prevent pools from cooling through evaporation, swiing pool water will become uncomfortably hot unless dynamically cooled. 8

9 Calorex heat pumps can be used for either heating a pool, cooling a pool or both making them the ultimate temperature control product. THE SOLUTION The answer to this problem is the Calorex range of purpose built heat pumps, chillers and heat cool systems for use in any size pool and plant room. Our products Calorex heat pumps are specifically designed for swiing pool heating and cooling. This means that all components used in their construction are designed to give maximum efficiency and reliability at swiing pool conditions, even in the toughest climates. Why heat pumps? Heat pumps are recognised as the most sustainable way to dynamically heat or cool swiing pool water saving both energy and operating costs. Unlike electric flow heaters and boilers that can only provide pool heating. Calorex heat pumps will automatically either heat or cool your pool without the need for additional equipment. s an added bonus, a Calorex heat pump will produce up to five times the energy it consumes, dramatically reducing the energy consumption of your swiing pool. Rapid installation, flexible operation Fully self-contained units, Calorex heat pumps easy to install and when it comes to operation, units offer quiet, reliable and safe performance. Year round operation Calorex heat pumps have various operating temperatures and will suit different environments and climates. Benefits Up to 4% operating cost and carbon saving against direct electric heaters Up to 47% operating cost saving against fossil fuel boilers Up to 6% carbon saving against fossil fuel boilers No flues or fuel storage tanks Simple installation and long service life Minimal maintenance Easy to retrofit to existing swiing pool systems 9

10 POOL WTER HETING IR TO WTER SMLL POOLS Options Winter protection cover Outdoor pools Private pools Spa pools bove ground pools Wellness centres Therapy pools COM-PC 8 Quiet, aesthetically pleasing design BS cabinet Scroll or Rotary compressor Titanium heat exchanger Reverse cycle defrost operation to 3 air temp Can heat water to 4 Smart pool pump control Condensate collection Water flow switch Three year limited parts supply warranty, first year includes labour Designed and manufactured in collaboration with Dantherm Group R&D Specifications Units COM-PC 6 COM-PC 8 COM-PC 12 COM-PC 15 COM-PC 2 ir temperature range Water temperature range +25/55% RH ambient +25/55% RH ambient +15/7% RH ambient +15/7% RH ambient +5/1% RH ambient +5/1% RH ambient COP 15 ambient Power supply Max. power input Max. current Refrigerant Min./max. pressure ir flow Sound 3m Sound 1m Product size (w x d x h) Weight Output and input 26 water temperature 1 V/Hz Pa m 3 /h db() db() kg /1ph/ R41a 1.5/ x 45 x /1ph/ R41a 1.5/ x 45 x /1ph/ R41a 1.5/ x 49 x /1ph/ R41a 1.5/ x 49 x /3ph/ R41a 1.5/ x 52 x

11 POOL WTER HETING IR TO WTER SMLL POOLS Indoor or outdoor pools Private pools Spa pools Hotel pools Wellness centres Therapy pools PRO-PC 12 Plastisol coated cabinet and BS top cover Intelligent electronic defrost Can be installed outside or in a plant room Choice on in-built thermostat positions High efficiency full flow Titanium condenser Leading brand rotary or scroll compressors Quiet, efficient owlet axial fans Water flow switch Pool pump synchronisation control Soft start options Pro-Pac X models operate in air temperatures above +5. These models are designed for seasonal use Pro-Pac Y models are fitted with reverse cycle defrost and will operate in air temperatures as low as -15, therefore they are suitable for all season use and indoor swiing pools Specifications Units PRO-PC 8 PRO-PC 12 PRO-PC 16 PRO-PC 22 ir temperature range Water temperature range +25/55% RH ambient +25/55% RH ambient +15/7% RH ambient +15/7% RH ambient -3/1% RH ambient* -3/1% RH ambient* Power supply V/Hz V/Hz (1ph/3ph) (1ph/3ph) * Y model only Output and input 26 water temperature 5* /1ph/5 5* /1ph/5 4/3ph/5 17/6.4 25/1 5* /1ph/5 4/3ph/5 19.8/8 3/15 5* /1ph/5 4/3ph/5 31/13 42/2 Minimum supply capacity Recoended supply fuse 14/N/ 2/N/ ir flow m 3 /h Flow rate l/min Pressure drop m hd Water connections inch 1½ BSPM or 5 female 1½ BSPM or 5 female 1½ BSPM or 5 female Compressor Condenser Sound 1m Sound 3m Product size (w x d x h) Weight - X models Weight - Y models Type Type db() db() kg kg 1 x Rotary Titanium x 535 x x Rotary Titanium x 535 x x Scroll Titanium x 535 x ½ BSPM or 5 female 1 x Scroll Titanium x 535 x

12 POOL WTER HETING IR TO WTER LRGE POOLS Options Soft start High pressure fan Indoor or outdoor pools Water parks Hotel pools Holiday parks and campsites PRO-PC 3BM Capacities from 32 to 125 Purpose designed components for pool heating Can be installed outside or in a plant room High efficiency spiral wound full flow titanium condenser Leading brand scroll compressors Quiet, efficient owlet axial fans Plastisol coated cabinet Water flow switch Condensate collector Standard models operate in air temperatures above +1. These models are designed for seasonal use Pro-Pac Y models are fitted with reverse cycle defrost and will operate in air temperatures as low as -15, therefore they are suitable for all season use and indoor swiing pools Specifications Units PRO-PC 3BM PRO-PC 45BM PRO-PC 7BM PRO-PC 9BM PRO-PC 14BM ir temperature range Water temperature range /55% RH ambient +25/55% RH ambient /7% RH ambient +15/7% RH ambient /1% RH ambient* -3/1% RH ambient* Power supply Minimum supply capacity Recoended supply fuse Nominal air flow Water flow Pressure drop Water connections Compressor Condenser Sound 1m Sound 3m Product size (w x d x h) Weight - Standard models Weight - Y models V/Hz m 3 /h l/min m hd inch Type Type db() db() kg kg 4/3ph/ Union 1 x Scroll Titanium x 79 x /3ph/ Union 1 x Scroll Titanium x 16 x /3ph/ BSPM 1 x Scroll Titanium x 119 x /3ph/ BSPM 2 x Scroll Titanium x 119 x /3ph/ BSPM 2 x Scroll Titanium x 165 x * Y model only Output and input 26 water temperature 12

13 HET COOL SYSTEMS Take control of your pool heating and cooling with the Calorex 34 and Pro-Pac ranges. Our products Calorex were the first to develop heat cool units for swiing pools and in doing so set the standard for proven performance and reliability. We have thousands of units in operation throughout the Gulf States, the oldest installed in s further testament to our coitment for manufacturing quality, Calorex is an ISO 91 accredited company under Lloyds register and all our products are tested in accordance with EU standards. Thanks to its centrifugal fan with variable external pressure capabilities, the 34 range can be ducted without loss of performance and comes with a stainless steel drip tray and heavily insulated cabinet as standard. Calorex Pro-Pac range Designed for non-ducted plant rooms or outdoor installation Pro- Pac units offer an economic solution to swiing pool heating and cooling, with the same reliability and efficiency as 34 range units. Calorex is also a founder member of the Microgeneration Scheme (MCS), a UK Government controlled initiative that demands independent product witness testing as part of a tough quality control procedure. Calorex 34 range Designed for ducted installation within a plant room or for outdoor installation the 34 range has proven to set the benchmark standard for swiing pool heating and cooling. Given the challenges that swiing pool designers face in locating a plant so that it cannot be seen or heard, the 34 range is designed with plant room installation in mind, alleviating the difficulties associated with external siting. R134a - the correct refrigerant in harsh conditions R134a is a non ozone depleting refrigerant which is specifically designed for high temperature applications. The refrigerant within a heat pump circuit is the life blood of its operation and will determine operational efficiency and reliability. The operating envelope of R134a is far greater than that of other coonly used refrigerants. This ensures that the heat pump will have a larger safety margin and always operate well within its capabilities, even in temperatures of 55 and beyond. 13

14 POOL WTER HETING ND COOLING IR TO WTER DOMESTIC ND COMMERCIL (CENTRIFUGL FN) W 1234BHC Options Chiller or heater only Rear or top outlet on 334 or 734 Soft start High pressure fan 3ph, 6Hz versions Outdoor and indoor pools (Gulf and SE sia) Health clubs and wellness centres Hotels and spa pools Designed for the Gulf climate Reduced energy consumption No additional equipment required Simple installation and long service life Suitable for all year round pool use Minimal maintenance Low operating costs Zero ozone depleting R134a refrigerant unlike R22 and R47C, R134a will operate reliably throughout every possible Gulf climatic condition Fully automatic operation Water flow switch (334 & 734 models) Weather and corrosion resistant construction including plastisol coated galvanised steel cabinet and epoxy coated coils 9/1 marine grade heat exchangers Specifications Units W 634HC W 1234BHC W 334BHC W 734BHC ir temperature range Water temperature range Heating +2/85% RH ambient Heating +2/85% RH ambient Cooling +45/5% RH ambient Cooling +45/5% RH ambient Power supply Recoended max. supply & fuse capacity Max. starting current standard (LR) Nominal air flow Fan external resistance (standard) High pressure fan Water flow ±1% Pressure drop (water) Water connections Condensate water connections Compressor Fan Sound 3m Product size (w x d x h) Weight Output and input calculated at water temperature 26 for heating, and 32 for cooling 14 V/Hz m 3 /h Pa Pa l/min m hd inch inch Type Type db() kg /1ph/ ¾ BSPM ¾ BSPM 1 x Recip 1x Centrifugal x 72 x /3ph/ ¾ BSPM ¾ BSPM 1 x Scroll 1x Centrifugal x 75 x /3ph/ Variable to meet customer requirements ½ BSPM 1½ BSPM 1 x Scroll 1x Centrifugal x 19 x /3ph/ ½ BSPM 1½ BSPM 1 x Scroll 1x Centrifugal x 134 x

15 POOL WTER HETING ND COOLING IR TO WTER DOMESTIC ND COMMERCIL (XIL FN) PRO-PC 16BHC Options Chiller or heater only 3ph, 6Hz versions Soft start High pressure fan Condensate insulation kit for plant room installations Outdoor and indoor pools (Gulf and SE sia) Health clubs and wellness centres Hotels and spa pools Designed for the Gulf climate Zero ozone depleting R134a refrigerant ensures reliable, efficient operation regardless of air temperature Titanium or CuNi heat exchanger Fully automatic operation Scroll compressors Water flow switch on all models Comprehensive circuit protection Quiet, efficient owlet axial fans Weather-proof construction Digital thermostat choice of in-built positions Specifications Units PRO-PC 16BHC PRO-PC 22BHC ir temperature range Water temperature range Heating +2/85% RH ambient Heating +2/85% RH ambient Cooling +45/5% RH ambient Cooling +45/5% RH ambient Power supply Min. supply capacity Recoended supply fuse Max. starting current standard (LR) Max. starting current soft start (LR) Nominal air flow Fan external resistance (standard) Water flow ±1% (CuNi/Titanium heat exchanger) Pressure drop (water) Water connections Condensate water connections Compressor Fan Sound 3m Product size (w x d x h) Weight V/Hz m 3 /h Pa l/min m hd inch " BSPM Type Type db() kg Output and input calculated at water temperature 26 for heating, and 32 for cooling /3ph/ n/a/123 n/a/.2 1½ F/PVC ½ BS 1 x Scroll 1 x xial x 6 x /3ph/ n/a/123 n/a/.2 1½ F/PVC ½ BS 1 x Scroll 1 x xial x 6 x

16 POOL WTER HETING ND COOLING IR TO WTER DOMESTIC ND COMMERCIL (XIL FN) PRO-PC 3BHC Options Chiller or heater only 3ph, 6Hz versions Soft start High pressure fan Condensate insulation kit for plant room installations Outdoor and indoor pools (Gulf and SE sia) Health clubs and wellness centres Hotels and spa pools Zero ozone depleting R134a refrigerant ensures reliable, efficient operation regardless of air temperature Titanium or CuNi heat exchanger Fully automatic operation Scroll compressors Water flow switch on all models Comprehensive circuit protection Quiet, efficient owlet axial fans Weather-proof construction Digital thermostat Specifications ir temperature range Water temperature range Heating +2/85% RH ambient Heating +2/85% RH ambient Cooling +45/5% RH ambient Cooling +45/5% RH ambient Power supply Min. supply capacity Recoended supply fuse Max. starting current standard (LR) Max. starting current soft start (LR) Nominal air flow Fan external resistance (standard) Water flow ±1% (CuNi/Titanium heat exchanger) Pressure drop (water) Water connections Condensate water connections Compressor Fan Sound 3m Width Depth Height Weight Units V/Hz m 3 /h Pa l/min m hd inch inch Type Type db() kg PRO-PC 3BHC /3ph/ n/a/25 n/a/.7 n/a/2 union 1½ BSPM 1 x Scroll 1 x xial PRO-PC 45BHC /3ph/ /3 4.5/.4 1½ BSPM/2 union 1½ BSPM 1 x Scroll 1 x xial PRO-PC 7BHC /3ph/ /5 3.4/1.5 1½/3 BSPM 1½ BSPM 2 x Scroll 1 x xial PRO-PC 9BHC /3ph/ /6 4.5/1.7 1½/3 BSPM 1½ BSPM 2 x Scroll 2 x xial PRO-PC 14BHC /3ph/ /1 5.3/2.1 2/4 BSPM 1½ BSPM 4 x Scroll 2 x xial Output and input calculated at water temperature 26 for heating, and 32 for cooling 16

17 WTER CHILLERS Calorex water chillers are ideal for plunge pools in spas and water iersion pools for sports recovery. Cold plunge pool water Cold-water treatments have been used for thousands of years all over the world to maintain physical health. It improves circulation and the iune system, makes for healthy skin and hair and increases energy. Calorex water chiller can provide a plunge pool in your home or business with the temperature you need. The chemical resistant cupro-nickel material of the heat exchangers and the use of R134a refrigerant means that these chillers can be connected directly to the pool water circuit and chill the water to1. lso, due to the weatherproof construction of the chillers, you have a range of installation options for both plants rooms and outside areas. When cool is not cold enough Whether you are a professional footballer, athlete or keen sports person, cold-water iersion is a very popular treatment method for repairing muscles and speeding up recovery from injuries. In certain situations, where 1 is not cold enough, the water for these treatments is required to be as low as 4. Water may also need to be as low as this in some coercial and industrial processes. In these cases, the chillers can be connected in line with a stainless steel plate heat exchanger, and connected to the water. This allows a glycol mix to be used in the chiller to get the temperatures required. Plunge pool Isolating valves Insulated shell Isolating valves Plunge pool Circulating 33 l/min Expansion tank 1L/KW Calorex W 634 water chiller Water circulating pump Plate heat exchanger Water circulating pump Mains fill For correct sizing of the chiller and/or plate heat exchanger for all applications please contact our dedicated sales team who can assist in tailoring the selection for your project. 17

18 POOL WTER COOLING WTER TO IR DOMESTIC (CENTRIFUGL FN) Options vailable in 6Hz Homes and villas Plunge pools W 634CL W 634CH Domestic sizes giving up to 9 litres per hour of cold water production Fully packaged, robust and weatherproof construction Quiet operation Purpose-built for operation in the Gulf region Certified cupronickel WRS* approved heat exchanger to withstand pool chemicals and allow the unit to be used in a direct system Non ozone depleting refrigerant (R134a) * WRS is a conformance mark that demonstrates that an item complies to strict standards set out by UK water regulations. This standard gives you peace of mind that approved products will not contaminate your water supply and are safe to use within their stated pressure and temperature ranges. Specifications Units W 634CL W 634CH W 1234BC ir temperature range Water temperature range 32 water 32 water 1 water 1 water Nominal cold water production Min./max. tank size Electrical input Power supply Max. supply fuse Starting current Water flow ±1% Flow resistance Connections Nominal air flow Fan external resistance (standard) Fan Sound pressure 3m Product size (w x d x h) Weight 18 l/h l V/Hz l/min mhd inch m³/h Pa Type db() kg Cooling output and input calculated at +45/5% RH ambient air / /1ph/ ¾ BSPM x Centrifugal x 72 x / /1ph/ ¾ BSPM x Centrifugal x 72 x / /3ph/ ¾ BSPM x Centrifugal x 75 x

19 POOL WTER COOLING WTER TO IR DOMESTIC ND COMMERCIL (XIL FN) Options vailable in 6Hz Sports academies Sports training facilities Plunge pools Therapy pools PRO-PC 16BC Domestic sizes giving up to 9 litres per hour of cold water production Mono-block design with choice of in-built thermostat positions Fully packaged, robust and weatherproof construction Quiet operation Purpose-built for operation in the Gulf region Certified cupronickel WRS* approved heat exchanger to withstand pool chemicals and allow the unit to be used in a direct system Non ozone depleting refrigerant (R134a) * WRS is a conformance mark that demonstrates that an item complies to strict standards set out by UK water regulations. This standard gives you peace of mind that approved products will not contaminate your water supply and are safe to use within their stated pressure and temperature ranges. Specifications Units PRO-PC 16BC PRO-PC 22BC ir temperature range Water temperature range 32 water 32 water 1 water 1 water Power supply Min. supply capacity Recoended supply fuse Max. starting current standard (LR) Max. starting current soft start (LR) Nominal air flow Fan external resistance (standard) Water flow ±1% Pressure drop (water) Water connections Compressor Fan Sound pressure 3m Product size (w x d x h) Weight V/Hz m 3 /h Pa l/min m hd inch Type Type db() kg Cooling output and input calculated at +45/5% RH ambient air /3ph/ ½ BSPF 1 x Scroll 1 x xial x 6 x /3ph/ ½ BSPF 1 x Scroll 1 x xial x 6 x

20 POOL WTER COOLING WTER TO IR COMMERCIL (XIL FN) Options vailable in 6Hz Sports academies Sports training facilities Plunge pools Therapy pools PRO-PC 14BC Fully packaged, robust and weatherproof construction Quiet operation Purpose-built for operation in the Gulf region Certified cupronickel WRS* approved heat exchanger to withstand pool chemicals and allow the unit to be used in a direct system Non ozone depleting refrigerant (R134a) * WRS is a conformance mark that demonstrates that an item complies to strict standards set out by UK water regulations. This standard gives you peace of mind that approved products will not contaminate your water supply and are safe to use within their stated pressure and temperature ranges. Specifications Units PRO-PC 3BC PRO-PC 45BC PRO-PC 7BC PRO-PC 9BC PRO-PC 14BC ir temperature range Water temperature range 32 water 32 water 1 water 1 water Power supply Min. supply capacity Recoended supply fuse Max. starting current standard (LR) Max. starting current soft start (LR) Nominal air flow Fan external resistance (standard) Water flow ±1% Pressure drop (water) Water connections Compressor Fan Sound pressure 3m Product size (w x d x h) Weight 2 V/Hz m 3 /h Pa l/min m hd inch Type Type db() kg /3ph/ ½ BSPM 1 x Scroll 1 x xial x 79 x Cooling output and input calculated at +45/5% RH ambient air /3ph/ ½ BSPM 1 x Scroll 1 x xial x 16 x /3ph/ ½ BSPM 2 x Scroll 1 x xial x 119 x /3ph/ ½ BSPM 2 x Scroll 2 x xial x 119 x /3ph/ BSPM 4 x Scroll 2 x xial x 165 x

21 POOL WTER COOLING WTER TO IR COMMERCIL (CENTRIFUGL FN) Options Rear or top outlet Soft start High pressure fan 3ph, 6Hz versions Homes and villas Hotels Pools and sports training facilities W 734BC Zero ozone depleting R134a refrigerant - unlike R22 and R47C, R134a will operate reliably throughout every possible Gulf climatic condition Fully automatic operation Certified cupronickel WRS* approved heat exchanger to withstand pool chemicals and allow the unit to be used in a direct system Water flow switch Weather and corrosion resistant construction including plastisol coated galvanised steel cabinet and epoxy coated coils 9/1 marine grade heat exchangers * WRS is a conformance mark that demonstrates that an item complies to strict standards set out by UK water regulations. This standard gives you peace of mind that approved products will not contaminate your water supply and are safe to use within their stated pressure and temperature ranges. Specifications Units W 334BC W 734BC ir temperature range Water temperature range 32 water 32 water 1 water 1 water Power supply Recoended maximum supply & fuse capacity Maximum starting current standard (LR) Nominal air flow Fan external resistance (standard) High pressure fan Water flow ±1% Pressure drop (water) Water connections Condensate water connections Refrigerant Compressor Fan Sound 3m Product size (w x d x h) Weight V/Hz m 3 /h Pa Pa l/min m hd inch inch Type Type Type db() kg Cooling output and input calculated at +45/5% RH ambient air /3ph/ Variable to meet customer requirements ½ BSPM 1½ BSPM R134a 1 x Scroll 1x Centrifugal x 19 x /3ph/ Variable to meet customer requirements ½ BSPM 1½ BSPM R134a 1 x Scroll 1x Centrifugal x 134 x

22 THE CHLLENGE tmospheric air contains moisture which when left unchallenged can lead to mould or possible structural damage or collapse. Why dehumidify? How a Calorex dehumidifier works n indoor swiing pool is a wonderful leisure and exercise environment but the evaporation from the water surface poses real problems for the building structure. Prolonged exposure to high humidity causes walls, decorative finishes and roofs to deteriorate rapidly. Personal comfort is also of prime importance. High humidity causes personal discomfort and unless the environment is controlled, bathers will be prevented from enjoying the swiing pool. Bathers appreciate comfortable humidity in the range 55%- 65%. 2 C Humid ir 8% Condensate to waste Evaporator Expansion Condenser Compressor 28 C Dry, Warm ir 4% Condensation Left unchallenged, it can be a major problem in indoor swiing pools and spas. Condensation, formed as water evaporating from the pool or spa surface, pushes up air humidity and can eventually lead to mould or even structural damage or collapse. In the past, the conventional approach to combating condensation came in the form of wasteful air extraction from the pool hall. Nowadays, the science of humidity control has moved into another realm. The advanced range of Calorex dehumidifiers provide an efficient and economical solution. The process of dehumidification involves moisture-laden air being drawn into a dehumidifier where the air passes across a refrigerated coil. The air is rapidly cooled below its dew point, condensing the water vapour and recovering its latent heat energy for re-use. The cooled air is then passed across the condenser where it is reheated and returned to the served area at the required lower relative humidity. Problems The problems caused by excess moisture include corrosion, building deterioration, uncomfortable environment, condensation, damp, mould and mildew and misting. 22

23 Calorex dehumidifiers maintain a comfortable humidity, minimise condensation and keep heating costs at the lowest possible level. THE SOLUTION The answer to this problem is the Calorex range of purpose built, stylish dehumidifiers for humidity control and energy recovery in indoor swiing pools. Our products High-performance low-cost Calorex dehumidifiers minimise the need for costly air extraction. Operating on the heat pump principle, these high-performance units recirculate pool air removing the moisture content and delivering warm, dry air back to the pool hall. By working in this way, they maintain a comfortable humidity, minimise condensation and keep heating costs at the lowest possible level. Rapid installation, flexible operation electricity consumed a real bonus for running costs! So that the best choice can be made, a full range of units is available. Each is supplied with full installation kits, and sound insulation. The Calorex dehumidifier range includes wall mounted and floor standing units. Low temperature operation Your pool hall still needs protection when you aren t using it, but economy dictates that you drop the air heating levels when you are away. The defrost versions operate down to temperatures just above freezing to ensure moisture control even in cold conditions. Fully self-contained units, Calorex dehumidifiers require minimal installation. When it comes to operation, units offer quiet, reliable and safe performance. Flexibility is built-in. Each unit comes with a specially styled barrel type discharge that allows air to be directed in an 8 range between horizontal and vertical, thus allowing installation at high or low level.* Energy saving Removing humidity from the air enables the Calorex to absorb latent energy and return it to the pool air as useful air heating. Its heat pump technology converts 2.5 to air heating for every 1 of * Only on DH 33/55 models Benefits Installation on use Energy efficient Low temperature operation vailable with air heating option utomatic operation Quality construction Optional features Simple installation Heat recovery to air 23

24 POOL DEHUMIDIFIERS WLL MOUNTED Performance data Litres/hr Options Defrost Zone Through the wall version LPHW air heater ir filter Floor stand kit DH 33 5 C 1 C 15 C 2 C 25 C 3 C 35 C 4%RH 5%RH 6%RH 7%RH 8%RH High moisture extraction for low power consumption Zero ozone depleting refrigerant Low internal operating pressures = long useful life Fan cycle or continuous mode ir outlet adjustable to horizontal or vertical Hot gas defrost (allows operation to 5 air temperature) Many options for flexible installation Remote humidistat and on/off function Indoor pools Therapy pools Health clubs and wellness centres Hotels and spa pools Holiday parks and campsites Specifications Units DH 33 Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Nominal power consumption FL Maximum supply fuse LR (compressor start) Heater type Heat 8 flow Flow rate Product size (w x d x h) Weight Condensate drain size (flexible plastic hose) l/h m 3 /h Pa db() V/Hz l/min kg R47c 23/1ph/ Optional LPHW x 255 x

25 POOL DEHUMIDIFIERS WLL MOUNTED Performance data Litres/hr Options Defrost Zone Through the wall version LPHW air heater ir filter Floor stand kit DH 55 5 C 1 C 15 C 2 C 25 C 3 C 35 C 4%RH 5%RH 6%RH 7%RH 8%RH High moisture extraction for low power consumption Zero ozone depleting refrigerant Low internal operating pressures = long useful life Fan cycle or continuous mode ir outlet adjustable to horizontal or vertical Hot gas defrost (allows operation to 5 air temperature) Many options for flexible installation Remote humidistat and on/off function Indoor pools Therapy pools Health clubs and wellness centres Hotels and spa pools Holiday parks and campsites Specifications Units DH 55 Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Nominal power consumption FL Maximum supply fuse LR (compressor start) Heater type Heat 8 flow Flow rate Product size (w x d x h) Weight Condensate drain size (flexible plastic hose) l/h m 3 /h Pa db() V/Hz l/min kg R47c 23/1ph/ Optional LPHW x 255 x

26 HIGH CPCITY POOL DEHUMIDIFIERS FLOOR STNDING DH 11 High moisture extraction for low power consumption Corrosion free, easy to clean aluminium air grille with easy clean air filter Zero ozone depleting refrigerant Low internal operating pressures = long useful life djustable air outlet Quiet centrifugal fans, two speeds Hot gas defrost (allows operation to 5 air temperature) Remote humidistat and on/off function Options Through the wall version LPHW air heater complete with 3 way valve and 12V thermostat interlock 4V-3ph option for DH 11 Indoor pools Therapy pools Health clubs and wellness centres Hotels and spa pools Holiday parks and campsites Performance data DH 75 DH Litres/hr 4 3 Defrost Zone Litres/hr 4 3 Defrost Zone C 1 C 15 C 2 C 25 C 3 C 35 C 4 C 5 C 1 C 15 C 2 C 25 C 3 C 35 C 4 C 4%RH 5%RH 6%RH 7%RH 8%RH 4%RH 5%RH 6%RH 7%RH 8%RH 26

27 POOL DEHUMIDIFIERS IR FLOW HOW IT WORKS Each Calorex unit includes an adjustable humidistat controlling relative humidity (RH) in the ideal range of 55% 65%. With RH under control, condensation can be minimised by selecting the most appropriate installation from the schematics shown below. Note: vulnerable areas such as windows, roof lights or other cold bridges may form condensation at low external air temperatures unless dry air is blown directly onto them. Condensate Water to Waste Condensate Water to Waste Boiler Wall mounted air flow Hall ir Temperature pprox 28 C Calorex Ground Level Wall mounted with air heating Calorex Ground Level Warm Dry ir Warm Wet ir Pool Water pprox 26 C Warm Dry ir Warm Wet ir Pool Water pprox 26 C Floor standing air flow Warm Dry ir Hall ir Temperature pprox 28 C Warm Wet ir Pool Water pprox 26 C Warm Dry ir Warm Wet ir Ground Level Floor standing with air heating Pool Water pprox 26 C Calorex Calorex Ground Level Condensate Water to Waste Condensate Water to Waste Boiler Through the wall Through the wall with air heating Warm Dry ir Warm Dry ir Calorex Warm Wet ir Warm Wet ir Ground Level Pool Water pprox 26 C Pool Water pprox 26 C Ground Level Calorex Boiler Specifications Units DH 75X DH 11X Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Nominal power consumption FL Maximum supply fuse LR (compressor start) Heater type Heat 8 flow Flow rate Product size (w x d x h) Weight Condensate drain size (brass compression) l/h m 3 /h Pa db() V/Hz l/min kg R47c 23/1ph/ Optional LPHW x 385 x R47c 23/1ph/ Optional LPHW x 385 x

28 THE CHLLENGE tmospheric air contains moisture which when left unchallenged can lead to mould or possible structural damage or collapse. Why dehumidify? There are many important factors to consider when planning and designing an indoor swiing pool. These include safeguarding the building structure from dangerous condensation and optimising the internal environment for the safety and comfort of bathers, to saving energy whilst minimising running costs and CO 2 emissions as far as possible for coercial and environmental reasons. Maintaining a comfortable pool environment requires the pool water and air to be heated and held at approximately 27 and 29 respectively. In many cases this heating is normally carried out by heat exchangers via LPHW boilers using oil or gas as fuel. s a result of continuous evaporation, uncomfortable warm humid air containing vast amounts of valuable heat in the form of latent energy must be removed from the pool hall. This is to protect the pool building from destructive condensation and chemical damage, whilst maintaining a safe and comfortable leisure environment for bathers. Humidity control In contrast to most buildings, indoor swiing pools constantly evaporate large volumes of moisture into the space around them. Unless this moisture is removed, humidity will rise creating an uncomfortable environment and structural and fabric damage. Calorex HUs will remove this moisture and recover energy from it which is then re-used to assist water and air heating. By utilising this method, a heat cycle is created and energy costs are kept to a minimum. Typically, for every unit of power that a Calorex heat pump consumes, it will convert three times this amount to usable heat. The potential energy savings are huge. In fact, compared to traditional heat and ventilation methods, cost savings of over 5% are achievable while corresponding CO 2 emissions can be dramatically reduced by up to 7%. 28

29 Calorex air handling units take care of heating, humidity control, ventilation and energy recovery in an efficient and economical way. THE SOLUTION The answer to this problem is the Calorex range of purpose built, air handling units for environmental control in indoor swiing pools. Our products Calorex are a leading manufacturer of swiing pool environmental control systems that provide dehumidification, heat recovery and ventilation solutions based around heat pump technology. swiing pool environmental control unit must carry out its primary task of dehumidifying the pool hall air, be designed and constructed to withstand pool air chemical condition, and provide a continuously modulated quantity of heated or cooled fresh air for the comfort of users. Calorex HUs will provide the complete answer to humidity control, water/air temperature control and real time fresh air requirements. By recovering the latent energy in the moisture laden air of a pool hall, a Calorex HU will return this energy to heat the pool water or use it to assist with pool air heating. Furthermore, there is usually sufficient recovered energy to provide all the operational water heating requirements with any further surplus used for air heating. Energy efficiency and CO 2 savings Huge rises in gas, electricity and water tariffs have added tens of millions of pounds of massive costs to a country s annual counity swiing bill. Consequently, local authorities and leisure operators find themselves under more pressure than ever to demonstrate effective energy efficiency. Calorex systems can simultaneously care for and preserve the building structure, reduce energy usage by up to 7% and lessen associated CO 2 emissions by up to 7% when compared to a conventional full fresh air ventilation system with cross plate heat exchanger. s the units are based on heat pump technology, efficiencies are normally around 3% which is well above the 5-6% normally offered by a cross plate heat exchanger. Benefits Dehumidification and ventilation systems with dynamic heat pump heat recovery to air and water Purpose built to withstand aggressive swiing pool atmospheres utomatic operation Energy efficient with running costs reduced by up to 7% Carbon emissions reduced by up to 7% 29

30 POOL IR HNDLING UNITS 3/5 Ducted heat pump dehumidification 3 5 ll models: Pool hall dehumidification Dynamic heat pump heat recovery Constant flow fan with two speed settings Remote control panel (12V) with 1.8m lead (1m cable optional) LPHW ir models add: Integral LPHW heat exchanger for air heating LPHW ir+water models add: Integral LPHW heat exchangers for pool and air Options FLNGE KIT Flexible flange kit to reduce vibration Indoor pools Private pools Therapy pools Health clubs and wellness centres Hotels and spa pools Specifications Units 3 5 ir flow External available static pressure 3/6% RH m³/h Pa l/h 13 ± 1% ± 1% Heat to air Via heat pump Via LPHW (LPHW ir models) Total (heat pump + LPHW) Heat to water Via LPHW (LPHW ir + Water models) Product size (h x w x d) 85 x 127 x x 127 x 73 Weight kg

31 POOL IR HNDLING UNITS VRIHET SYSTEMS Ducted heat pump dehumidification with heat recovery Pool hall dehumidification Dynamic heat pump heat recovery to pool and air Constant flow EC fan (models 6, 9, 12) Speed controllable EC fan (model 15) PLC control with 3.5" touchscreen user interface Remote monitoring/control W 12 +LPHW models add: Integral LPHW heat exchanger for air heating W models add: Dynamic heat pump heat recovery to pool and air Integral LPHW heat exchangers for pool and air Options VRIHET TOUCHSCREEN Fresh air module Upgraded LPHW heat exchanger for air Electric resistance air heaters (6/12/18) ir cooling with remote condenser Titanium pool condenser (W models only) Electrical heater option notes In lieu of LPHW heat exchangers 6 or 12 is available for 6 and 9 models 12 or 18 is available for 12 and 15 models Spa and therapy pools Hotel pools and wellness centres Holiday parks & campsites 31

32 POOL IR HNDLING UNITS VRIHET SYSTEMS Installation options Top outlet Bottom outlet Basement outlet Remote condensing unit option Horizontal outlet Top outlet Bottom outlet 32

33 POOL IR HNDLING UNITS VRIHET SYSTEMS Configurations Variheat 6/9 fig 1 fig 2 fig 3 fig 4 H L D fig 1 fig 2 fig 3 fig 4 H H H H L L L L Variheat 12/15 fig 1 fig 2 fig 3 fig 4 H L D fig 1 fig 2 fig 3 fig 4 H H H H L L L L Example configurations are shown but alternative configurations are available. Specifications Units W 6 6 W 9 9 W W ir flow External available static pressure Fresh air flow (option) External available static pressure 3 o C/6% RH 3 o C/7% RH Heat to air Net via heat pump (Mode B) Via standard 8 o C Max. available (Mode B + standard LPHW) Via upgraded 55 o C Max. available (Mode B + upgraded LPHW) Heat to water Net via heat pump (Mode ) Via 8 o C Max. available (Mode + LPHW) m 3 /h Pa m 3 /h Pa l/h l/h Nominal power consumed W denotes heat recovery to air/water and LPHW heaters for air/water denotes heat recovery to air and optional LPHW heater for air only

34 POOL IR HNDLING UNITS DELT SYSTEMS Ducted heat pump dehumidification, ventilation and heat recovery Dynamic heat pump heat recovery to pool and air Self-regulating fresh air control with heat recovery utomatic control of exhaust air volume to match pool usage Free-cooling (Delta 1-2) Free-cooling and heat pump air cooling (Delta 4-16) Integral LPHW heat exchangers for pool and air Speed controllable EC/inverter fans in all models PLC control with 5.7" touchscreen user interface Remote monitoring/control DELT 4 Remote monitoring/control s standard the following remote connectivity is available: Screen mirroring to ndroid/ios mobile devices using thirdparty app Screen mirroring to web browser with ctivex BMS interfaces for Modbus, BCnet IP and BCnet MS/TP Wired remote control interfaces DELT TOUCHSCREEN Health clubs and wellness centres Holiday parks and campsites Hotel and spa pools Leisure centres Water parks 34

35 POOL IR HNDLING UNITS DELT SYSTEMS How the air flows through the Delta Full dehumidification and heat recovery Light dehumidification and heat recovery Supply ir Return ir Supply ir Return ir CONDENSTE CONDENSTE WRM DRY IR HOT DRY IR COOL DRY IR WRM HUMID IR WRM DRY IR HOT DRY IR COOL DRY IR WRM HUMID IR Delta operating on maximum dehumidification of pool air with full heat recovery to pool water and air. vailable energy is removed from exhaust air stream. Supplementary heat, if required, supplied by LPHW (water or air). Delta operating on light dehumidification with full heat recovery and reduced fresh air stream control system automatically selects correct operating mode and damper position. LPHW heat available when required. ir-conditioning Night set back Suppy ir Return ir Suppy ir Return ir CONDENSTE CONDENSTE WRM DRY IR HOT DRY IR COOL DRY IR WRM HUMID IR WRM DRY IR HOT DRY IR COOL DRY IR WRM HUMID IR Delta models 4 and above provide an air conditioning facility to minimise the effects of solar gain from larger glazed areas or very high usage. utomatic damper and mode control. ir temperature set back control is incorporated as standard in all Delta units and controlled by a time clock. Pool hall air is dropped to a lower temperature for maximum economy. ir recirculation is maintained, dampers allow low fresh air flow. 35

36 POOL IR HNDLING UNITS DELT SYSTEMS Specifications Units DT 1 DT 2 DT 4 DT 6 DT 8 DT 1 DT 12 DT 14 DT 16 Nominal recirculation air flow m 3 /h Exhaust/fresh air flow (stepped control) m 3 /h Total 28/6% RH by heat pump and maximum fresh air l/h Heat to air Via heat pump (Mode B) Via standard 8 Via upgraded 55 Total Mode B + standard LPHW Heat to pool water Via heat pump (Mode ) Via 8 Via 55 Total Mode + LPHW Cooling duty Total Sensible Nominal power consumed Width Depth Height Weight kg Options Delta 1-6 single or three phase Delta 8-16 three phase only Upgraded LPHW heat exchanger for air heating Left-hand or right-hand orientation (Delta 4-16) Top, side or bottom supply fan outlet Front or rear supply fan outlet (Delta 14-16) Rear exhaust and fresh air connections (Delta 14-16) 36

37 POOL IR HNDLING UNITS HRD SYSTEMS HRD 3 Dynamic heat pump heat recovery to pool and air Self-regulating fresh air control utomatic control of exhaust air volume to match pool usage Free-cooling (HRD 15-2) Free-cooling and heat pump air cooling (HRD 25-3) Integral LPHW heat exchanger for air heating Double skinned insulated cabinet Bespoke fan specifications Leisure centres Olympic pools Hotel pools Wellness centres Health clubs Holiday parks & campsites Options Upgraded LPHW heat exchanger for air heating Left-hand or right-hand orientation Choice of supply fan outlet orientations Choice of fan static pressures BMS interface Specifications Units HRD 15 HRD 2 HRD 25 HRD 3 Nominal recirculation air flow Exhaust/fresh air flow (stepped control) 28/6% RH by heat pump Total by heat pump and maximum fresh air Heat to air Via heat pump (Mode B) Via standard 8 Maximum available (Mode B + standard LPHW) Heat to water Via heat pump (Mode ) Cooling duty Sensible Mode Sensible Mode B m³/h m³/h l/h l/h Nominal power consumed (dependent upon main fan duty)

38 WHY CLOREX HET PUMP? Calorex heat pumps provide a sustainable heating solution which, compared to fossil fuel or direct electric systems, will dramatically cut operating costs and carbon emission. Calorex air source heat pumps can use source heat from every climatic condition and are available in different designs to suit space or hot water heating. The heat pump cycle HOT GS COMPRESSOR COOL GS Calorex products offer industry leading standards of efficiency and durability and are supported by comprehensive technical support that guarantees correct product specification and after sales care. WTER OUT HET EXCHNGER EVPORTOR MBIENT IR Unrivalled efficiency WTER IN Unlike fossil fuel and direct electric heating systems, a Calorex heat pump is capable of delivering up to five times more energy than it consumes, and unlike solar systems, Calorex heat pumps do not need the sun to shine in order to provide this efficiency. CONDENSED REFRIGERNT HIGH PRESSURE SIDE COLD LIQUID EXPNSION REFRIGERNT VLVE LOW PRESSURE SIDE Heat pump efficiency at differing air temperatures Free heat from the air free units 7 free units 6 free units 5 free units 3 free units Energy consumed 2 paid for units 2 paid for units 2 paid for units 2 paid for units 2 paid for units Total heat recovered 1 units recovered 9 units recovered 8 units recovered 7 units recovered 5 units recovered 38 C.O.P. 5 : : 1 4 : : : 1 Total heat recovered energy consumed = Coefficient of Performance (C.O.P.)

39 Harness the heat you don t have to pay for with Calorex's range of air source heat pumps. ESY INSTLLTION The Calorex range of hot water heat pumps are a quality range of packaged units specifically designed for hot water heating to 68. Calorex heat pumps are simple to install, require little maintenance and alleviate the need for fuel storage tanks and flues that are normally associated with fossil fuel heating systems. Further, due to their unique ability to collect and enhance "free" heat from the air around them, they are kinder to the environment than traditional heating systems and exceptionally inexpensive to operate. Calorex Pro-Pac range Pro-Pac heat pumps can be installed outside or in a plant room that has adjacent outside walls. Pro-Pac can be supplied with high speed axial fans. Typical installation diagram for Calorex hot water heat pump Calorex 34 range Designed for outdoor or plant room installation, all 34 range are provided with centrifugal fans as standard. choice of fan external static pressure offers flexible installation and an ability for the units to provide cold air through a ducted system. WRS approved WRS is a conformance mark that demonstrates that an item complies to strict standards set out by UK water regulations. This standard gives you peace of mind that approved products will not contaminate your water supply and are safe to use within their stated pressure and temperature ranges. 39

40 WTER HETING IR TO WTER HOT WTER HET PUMPS (XIL FN) Hotels Hospitals Schools Swiing pools partment buildings Nursing homes Large private houses PRO-PC 16MY Efficiencies of up to 5% most of the energy that is provided is absorbed completely free of charge from ambient air around the heat pump Monobloc construction with choice of inbuilt thermostat positions. lternatively, the unit can be controlled by a remote water tank thermostat High efficiency, sound insulated scroll compressor. Quiet, efficient owlet axial fan Plastic coated, galvanised case Certified cupronickel WRS approved heat exchanger to allow the unit to be used in a direct system with potable water Options R134a refrigerant allows the unit to operate up to 65 water temperature Soft start RS 485 compatible thermostat Specifications Units PRO-PC 16MY ir temperature range Water temperature range Output water 3 15 ambient 7 ambient ambient 15 ambient Power supply Minimum supply capacity Recoended supply fuse V/Hz () 1ph () 1ph /1ph/ ir flow m 3 /h 35 Flow rate Pressure drop Water connections l/min m hd inch ¾ BSPM Compressor Condenser Sound 1m Sound 3m Product size (w x d x h) Weight Type Type db() db() kg 1 x Scroll WRS Cu-Ni x 535 x

41 WTER HETING IR TO WTER HOT WTER HET PUMPS (XIL/CENTRIFUGL FN) Options W 1234H PRO-PC 14H Reverse cycle defrost allows operation down to -15 o C (excluding 834,1234 and 1534) Soft start High pressure fans Top or rear air discharge (334 and 734 only) Hot water production to 68 Space heating through fan coils, radiators, underfloor system Heat recovery from soil, rivers, lakes and chilled water systems Space cooling as a by product of the heating process Up to 4% running cost and carbon savings against electric heating Up to 48% running cost and carbon savings against fossil fuel system No flues or storage tanks Easy to retrofit Minimal service requirements Certified cupronickel WRS approved heat exchanger to allow the unit to be used in a direct system with potable water Range of capacities from 6 to 14 R134a ozone friendly refrigerant ensures reliable operation up to 68 o C Fully weatherproof polyester or epoxy coated cabinet Quiet, efficient owlet axial fans Choice of centrifugal fans (34 range only) allows ducting from plant rooms or distribution of cold air for space cooling ir source heat pumps for hot water up to 68 during ambient temperature from 1 to 5 (-15 to 5 optional) Hotels Hospitals Clubs Leisure centres For technical data see page 42 41

42 WTER HETING IR TO WTER HOT WTER HET PUMPS (XIL/CENTRIFUGL FN) Specifications Units W 834H W 1234H W 1534H W 334H W 734H ir temperature range Water temperature range Duty output to 3/55 +25/55% RH ambient +25/55% RH ambient +15/7% RH ambient +15/7% RH ambient +5/1% RH ambient +5/1% RH ambient Power supply Minimum supply capacity Recoended supply fuse Nominal air flow External static (standard units) External static (uprated units) Water flow ±1% Pressure drop (water) Water connections Fan Compressor Condenser Sound pressure 1m Sound pressure 3m Product size (w x d x h) Weight V/Hz V/Hz (1ph) (3ph) (1ph) (3ph) m3/h Pa Pa l/min m hd inch Type Type Type db() db() kg / / /6. 1.4/ / /2. 23/1ph/5 4/3ph/ ¾ BSPM 1 x Centrifugal 1 x Recip x 75 x / / /9. 2./ / /2.9 23/1ph/5 4/3ph/ ¾ BSPM 1 x Centrifugal 1 x Scroll x 75 x / / / / / /3.8-4/3ph/ ¾ BSPM 1 x Centrifugal 1 x Scroll / / / / / /7.9-4/3ph/ Variable to 25Pa ½ BSPM 1 x Centrifugal 1 x Scroll Cu tube in shell (WRS approved Cu-Ni optional) x 755 x x 19 x / / / / /31. 8./12.2-4/3ph/ ½ BSPM 1 x Centrifugal 1 x Scroll x 134 x Specifications Units PRO-PC 3H PRO-PC 45H PRO-PC 7H PRO-PC 9H PRO-PC 14H ir temperature range Water temperature range Duty output to 3/55 +25/55% RH ambient +25/55% RH ambient +15/7% RH ambient +15/7% RH ambient +5/1% RH ambient +5/1% RH ambient Power supply Minimum supply capacity Recoended supply fuse Nominal air flow External static (standard units) External static (uprated units) Water flow ±1% Pressure drop (water) Water connections Fan Compressor Condenser Sound pressure 1m Sound pressure 3m Product size (w x d x h) Weight V/Hz m3/h Pa Pa l/min m hd inch Type Type Type db() db() kg / / / / / /6.3 4/3ph/ N/ ½ BSPM 1 x xial 1 x Scroll x 79 x / / / / / /8.1 4/3ph/ ½ BSPM 1 x xial 1 x Scroll / / / / / /11.6 4/3ph/ ½ BSPM 1 x xial 1 x Scroll / / / / / /16.1 4/3ph/ ½ BSPM 1 x xial 2 x Scroll Cu tube in shell (WRS approved Cu-Ni optional) x 16 x x 119 x x 119 x / / / / / /23.1 4/3ph/ ½ BSPM 1 x xial 2 x Scroll x 165 x

43 WTER HETING WTER TO WTER HOT WTER HET PUMPS Hotels Hospitals Schools Swiing pools partment buildings Nursing homes Large private houses WW 64BH Hot water production to 68 Space heating through fan coils, radiators, underfloor system Heat recovery from soil, rivers, lakes and chilled water systems Space cooling as a by product of the heating process Range of capacities from 2 to 12 R134a refrigerant wide operating range Certified cupronickel WRS approved heat exchanger to allow the unit to be used in a direct system with potable water High efficiency scroll compressors coustically lined cabinets High electrical and mechanical circuit protection Specifications Units WW 34BH WW 64BH WW 14BH WW 1254BH Water temperature range Heating Source 1 Output to 55 Electrical input Output to 35 Electrical input Source 15 Output to 55 Electrical input Output to 35 Electrical input Cooling Source 12 Output to 55 sink Electrical input Output to 35 sink Electrical input Power supply Max. starting current (LR) Min. supply capacity Max. supply fuse Compressor V/Hz Type 4/3ph/ x Scroll 4/3ph/ x Scroll 4/3ph/ x Scroll 4/3ph/ x Scroll Source flow rate (±1%) Process flow rate (±1%) Water pressure drop (at rated flow) Process water temperature (max.) Water connections (Copper/PVC) l/min l/min m hd inch ½ BSPM ½ BSPM BSPM ½/2 BSPM Sound 1m Refrigerant Product size (w x d x h) Weight db() kg 68 R134a 1665 x 16 x R134a 15 x 15 x R134a 225 x 165 x R134a 225 x 165 x

44 IR COOLING ND WTER HETING IR TO WTER KITCHEN COOLERS WITH HET RECOVERY Options W 45SC Hot gas defrost Stainless steel case High temperature version for heating water to 65 Heat reject unit (required when air cooling has priority over water heating) ir filter Cooling down to 7 (-5 with hot gas defrost option) Rugged PVC coated galvanised steel case Wall mounted Easy to install and connect W 45SC produces up to 33 litres of hot water per day at 5 enough for 66 typical covers per day W 25SC produces up to 24 litres of hot water per day at 5 enough for 43 typical covers per day Coercial kitchens Launderettes Beer and wine cellars Spas and clubs Campsites and caravan parks Waste heat recovery from boiler rooms with water pre-heat capacity Specifications Units W 25SC W 45SC ir temperature range Water temperature range Max. water flow Min. water flow Max. water resistance Min. water resistance Water connections ir flow External resistance Fan drive Sound 3m Power supply Supply LR FL Power consumed Product size (h x w x d) Weight * -5 with hot gas defrost 44 l/min l/min mhd mhd m3/h WG db() V/Hz kg 7* pipe stub 119 Direct /1ph/ x 78 x * pipe stub 1698 Direct /1ph/ x 1245 x 34 95

45 WTER CHILLERS Calorex water chillers are ideal for cooling water in a variety of applications. They can provide cold-water for showers in homes or leisure clubs, plunge pools in spas, water iersion pools for sports recovery or even water for process cooling. Cool domestic water Calorex water chillers are equipped with cupronickel WRS approved heat exchangers. This means that you can connect this chiller directly in line with the potable water giving you a more efficient and much simpler installation. Installation when existing storage tank is inadequately insulated or greater than 5 litre capacity Existing cold water storage tank Buffer tank (direct type) normal capacity L Circulating 33 l/min Installation to cool domestic water Existing cold water storage tank (insulated), up to 5L capacity Circulating 33 l/min WRS approved Fill Calorex W634 water chiller To domestic cold water services Calorex W634 water chiller WRS is a conformance mark that demonstrates that an item complies to strict standards set out by UK water regulations. This standard gives you peace of mind that approved products will not contaminate your water supply and are safe to use within their stated pressure and temperature ranges. 45

46 WTER COOLING WTER TO IR COMMERCIL (CENTRIFUGL FN) Options vailable in 6Hz Hotels and clubs Offices griculture W 1234BC Domestic sizes giving up to 9 litres per hour of cold water production Fully packaged, robust and weatherproof construction Quiet operation Purpose-built for operation in the Gulf region Certified cupronickel WRS approved heat exchanger to allow the unit to be used in a direct system with potable water Non ozone depleting refrigerant (R134a) Specifications Units W 634CL W 634CH W 1234BC ir temperature range Water temperature range 32 water 32 water 1 water 1 water Nominal cold water production Min./max. tank size Electrical input Power supply Max. supply fuse Starting current Water flow ±1% Flow resistance Connections Nominal air flow Fan external resistance (standard) Fan Sound pressure 3m Product size (w x d x h) Weight 46 l/h l V/Hz l/min mhd inch m³/h Pa Type db() kg Cooling output and input calculated at +45/5% RH ambient air / /1ph/ ¾ BSPM x Centrifugal x 72 x / /1ph/ ¾ BSPM x Centrifugal x 72 x / /3ph/ ¾ BSPM x Centrifugal x 75 x

47 WTER COOLING WTER TO IR COMMERCIL (XIL FN) Options vailable in 6Hz PRO-PC 14 Mono-block design with choice of in-built thermostat positions Fully packaged, robust and weatherproof construction Quiet operation Purpose-built for operation in the Gulf region Certified cupronickel WRS approved heat exchanger to allow the unit to be used in a direct system with potable water Non ozone depleting refrigerant (R134a) Sports academies Sports training facilities Plunge pools Therapy pools Specifications Units PRO-PC 16BC PRO-PC 22BC PRO-PC 3BC PRO-PC 45BC PRO-PC 7BC PRO-PC 9BC PRO-PC 14BC ir temperature range Water temperature range 32 water 32 water 1 water 1 water Power supply Min. supply capacity Recoended supply fuse Max. starting current standard (LR) Max. starting current soft start (LR) Nominal air flow Fan external resistance (standard) Water flow ±1% Pressure drop (water) Water connections Compressor Fan Sound pressure 3m Product size (w x d x h) Weight V/Hz m 3 /h Pa l/min m hd inch Type Type db() kg /3ph/ ½ BSPF 1 x Scroll 1 x xial x 6 x Cooling output and input calculated at +45/5% RH ambient air /3ph/ ½ BSPF 1 x Scroll 1 x xial x 6 x /3ph/ ½ BSPM 1 x Scroll 1 x xial x 79 x /3ph/ ½ BSPM 1 x Scroll 1 x xial x 16 x /3ph/ ½ BSPM 2 x Scroll 1 x xial x 119 x /3ph/ ½ BSPM 2 x Scroll 2 x xial x 119 x /3ph/ BSPM 4 x Scroll 2 x xial x 165 x

48 WTER COOLING WTER TO IR COMMERCIL (CENTRIFUGL FN) Options Rear or top outlet Soft start High pressure fan 3ph, 6Hz versions Homes and villas Hotels Pools and sports training facilities W 734BC Zero ozone depleting R134a refrigerant - unlike R22 and R47C, R134a will operate reliably throughout every possible Gulf climatic condition Designed and manufactured in the UK to CE standards Fully automatic operation Scroll compressors Certified cupronickel WRS approved heat exchanger to allow the unit to be used in a direct system with potable water Water flow switch Weather and corrosion resistant construction including plastisol coated galvanised steel cabinet and epoxy coated coils 9/1 marine grade heat exchangers Specifications Units W 334BC W 734BC ir temperature range Water temperature range 32 water 32 water 1 water 1 water Power supply Recoended maximum supply & fuse capacity Maximum starting current standard (LR) Nominal air flow Fan external resistance (standard) High pressure fan Water flow ±1% Pressure drop (water) Water connections Condensate water connections Refrigerant Compressor Fan Sound 3m Product size (w x d x h) Weight 48 V/Hz m 3 /h Pa Pa l/min m hd inch inch Type Type db() kg Cooling output and input calculated at +45/5% RH ambient air /3ph/ Variable to meet customer requirements ½ BSPM 1½ BSPM R134a 1 x Scroll 1 x Centrifugal x 19 x /3ph/ Variable to meet customer requirements ½ BSPM 1½ BSPM R134a 1 x Scroll 1 x Centrifugal x 134 x

49 CONTROL YOUR INDOOR CLIMTE PRESERVE ND PROTECT GOODS, VLUBLES ND ELECTRONICS FROM HUMIDITY WITH OUR LRGE RNGE OF DEHUMIDIFIERS. 49

50 THE CHLLENGE tmospheric air contains moisture which is a problem to materials and manufacturing processes. Protect your environment Even when you cannot see it, moisture in the form of water vapour is all around us, held in suspension in the air. The relative humidity of the air in many cases determines the extent of corrosion of certain materials, the speed at which moulds develop and the rate of increase of bacteria that cause decay. Most materials and goods are best stored under cool dry conditions. Corrosion speed of steel Rust increase in 55 days, graes per square metre Relative humidity in % 1 With an RH of over 6% the rate of corrosion on steel rises rapidly t an RH of approximately 5% virtually no corrosion occurs Relative humidity Relative humidity (RH) is the expression used to define how much water vapour can be held in the air at a given temperature as a percentage of what it could contain at saturation (1% RH). That is when the relative humidity reaches the level at which air can hold no more moisture. The maximum amount can vary according to its temperature warmer air is capable of holding more moisture than colder air. false economy Traditionally the problem was disguised by the use of heat or ventilation. This process is exceptionally energy inefficient and reliant on introducing outside air that is generally not suitable unless expensively heated. Drying by traditional heating involves continuously warming a stream of outside air on a constant in and out cycle.

51 Take control of humidity and condensation with our leading range of dehumidifiers. THE SOLUTION The answer to this problem is Calorex's wide range of dehumidifiers suitable for every environment from warehouses and sub-stations to museums and garages. better way How a Calorex dehumidifier works Dehumidification is much more sophisticated than heating. It recirculates the same air and physically removes moisture from it. This alleviates the need to continuously reheat incoming air. Not only that, a dehumidifier will cleverly convert energy taken out of the room as moisture (latent energy), to create sensible energy that can be used to heat the room, accelerating the drying process. Problem solved 2 C Humid ir 8% Condensate to waste Evaporator Expansion Condenser Compressor 28 C Dry, Warm ir 4% Our wide range of units and operating temperatures ensure there is a system to fit every need. From high tech problems requiring sophisticated total loss or keep dry recirculation systems to a simple off the shelf mobile dehumidifier to plug in and go - Calorex are unique problem solvers in their field. The process of dehumidification involves moisture-laden air being drawn into a dehumidifier where the air passes across a refrigerated coil. The air is rapidly cooled below its dew point, condensing the water vapour and recovering its latent heat energy for re-use. The cooled air is then passed across the condenser where it is reheated and returned to the served area at the required lower relative humidity. 51

52 DEHUMIDIFIERS WLL MOUNTED ir temperature C Performance data 35 C 3 C 25 C 2 C 15 C Options 4% 5% 6% 7% Through the wall version 8% 1 C Litres/24 hours DH 15 SENSIBLE HET OUTPUT * TO IR *T 6% RH ELECTRICL INPUT * Compact design for installation in small areas Self contained with fully automatic operation Integral humidistat Tamper proof controls Epoxy polyester painted zintec steel cabinet Hot gas defrost for low temperature operation ir filter Drying rooms Public buildings Changing rooms Store rooms Modular buildings Stairwells, cellars and basements Museums and galleries Unheated premises Garages Specifications Units DH 15X Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Nominal power consumption FL Maximum supply fuse LR (compressor start) Product size (w x d x h) Weight Condensate drain size (flexible plastic hose) l/24h m 3 /h Pa db() V/Hz kg ID R47c 23/1ph/ x 363 x

53 DEHUMIDIFIERS WLL MOUNTED ir temperature C Performance data 35 C 3 C 25 C 2 C 15 C Options 3% 4% 5% 6% 7% 8% 1 C Litres/24 hours Through the wall version Electric air heater Floor stand kit DH 3 SENSIBLE HET OUTPUT * TO IR *T 6% RH ELECTRICL INPUT * Self contained with fully automatic operation Integral humidistat Polyester coated evaporator and condenser Plastisol coated galvanised steel cabinet Hot gas defrost for low temperature operation Quiet centrifugal fans Remote humidistat and on/off function Drying rooms Modular buildings Electrical sub-stations Sports clubs and changing rooms Warehousing and storage Museums, libraries and galleries Garages Specifications Units DH 3X DH 3XP Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Dehumidifier power input FL Maximum supply fuse LR (compressor start) Heater type Heat output Flow rate Product size (w x d x h) Weight Condensate drain size (flexible plastic hose) l/24h m 3 /h Pa db() V/Hz l/min kg ID R47c 23/1ph/ Optional LPHW x 27 x R47c 23/1ph/ Standard Electric x 27 x

54 DEHUMIDIFIERS WLL MOUNTED Performance data ir temperature C 35 C 3 C 25 C 2 C 15 C Options 3% 4% 5% 6% 7% 8% 1 C Litres/24 hours Through the wall version Electric air heater Floor stand kit DH 6 SENSIBLE HET OUTPUT * TO IR *T 6% RH ELECTRICL INPUT * Self contained with fully automatic operation Integral humidistat Polyester coated evaporator and condenser Plastisol coated galvanised steel cabinet Hot gas defrost for low temperature operation Quiet centrifugal fans Remote humidistat and on/off function rchives and museums Churches Changing rooms Waterworks Garages and car storage Specifications Units DH 6X DH 6XP Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Dehumidifier power input FL Maximum supply fuse LR (compressor start) Heater type Heat output Flow rate Product size (w x d x h) Weight Condensate drain size (flexible plastic hose) l/24h m 3 /h Pa db() V/Hz l/min kg ID R47c 23/1ph/ Optional LPHW x 27 x R47c 23/1ph/ Standard Electric x 27 x

55 HIGH CPCITY DEHUMIDIFIERS FLOOR STNDING ir temperature C Performance data DH C 3 C 25 C 2 C 15 C 4% 5% 6% 7% 8% SENSIBLE HET OUTPUT * TO IR DH 11 ELECTRICL INPUT * Self contained with fully automatic operation Integral humidistat Polyester coated evaporator and condenser Stove enamelled aluminium cabinet Hot gas defrost for low temperature operation Quiet centrifugal fans, two speeds Remote humidistat and on/off function 1 C Litres/24 hours Performance data DH C 4% 5% 6% 7% 8% 1.7 SENSIBLE HET OUTPUT * TO IR 5.9 *T 6% RH 1.1 ELECTRICL INPUT * 2.5 Options Through the wall version LPHW air heater Remote humidistat ir temperature C 3 C 25 C 2 C 15 C 1 C Litres/24 hours *T 6% RH Data centres Warehousing and storage Museums, archives, art galleries, offices Sports halls and gyms Specifications Units DH 75X DH 11X DH 11BX Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Nominal power consumption FL Maximum supply fuse LR (compressor start) Heater type Heat 8 flow Flow rate Product size (w x d x h) Weight Condensate drain size (brass compression) l/24h m 3 /h Pa db() V/Hz l/min kg R47c 23/1ph/ Optional LPHW x 385 x R47c 23/1ph/ Optional LPHW x 385 x R47c 4/3ph/ Optional LPHW x 385 x

56 HIGH CPCITY DEHUMIDIFIERS FLOOR STNDING ir temperature C Performance data 35 C 3 C 25 C 2 C 15 C 3% 4% 5% 6% 7% 8% 1 C Litres/24 hours DH 15 SENSIBLE HET OUTPUT * TO IR *T 75% RH ELECTRICL INPUT * Self contained with fully automatic operation Integral humidistat Constant flow fan automatically adjusts to ducting Polyester coated evaporator and condenser Plastisol coated galvanised steel cabinet Hot gas defrost for low temperature operation For options see page 58 Warehousing and equipment storage Metal and spare parts storage Electrical sub-stations Museums and furniture storage Car storage facilities Specifications Units DH 15X DH 15BX Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Nominal power consumption FL (electrical) Maximum supply fuse LR (compressor start) LR (compressor soft-start) Heater type Heat output Power supply FL (heater) Maximum fuse size Product size (w x d x h) Weight Condensate drain size (flexible plastic hose) l/24h m 3 /h Pa db() V/Hz Optional V/Hz kg inch R47c 23/1ph/ Top box electric 9 23/1ph/ x 66 x ¾ BSPM R47c 4/3ph/ Top box electric 9 4/3ph/ x 66 x ¾ BSPM 56

57 HIGH CPCITY DEHUMIDIFIERS FLOOR STNDING DH 3BY Self contained with fully automatic operation Integral humidistat Polyester coated evaporator and condenser Plastisol coated galvanised steel cabinet Reverse cycle defrost for very low temperature operation For options see page 58 Performance data ir temperature C 35 C 3 C 25 C 2 C 15 C SENSIBLE HET OUTPUT * TO IR 3% 4% 5% 6% 7% 8% C Litres/24 hours *T 75% RH ELECTRICL INPUT * Warehousing and equipment storage Metal and spare parts storage Electrical sub-stations Museums and furniture storage Car storage facilities Specifications Units DH 3BY Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Nominal power consumption FL Maximum supply fuse LR (compressor start) LR (compressor soft-start) Product size (w x d x h) Weight Condensate drain size (flexible plastic hose) l/24h m 3 /h Pa db() V/Hz kg inch R47c 4/3ph/ x 826 x ½ BSPM 57

58 HIGH CPCITY DEHUMIDIFIERS FLOOR STNDING ir temperature C Performance data 35 C 3 C 25 C 2 C 15 C 1 C Litres/24 hours DH 6 SENSIBLE HET OUTPUT * TO IR 3% 4% 5% 6% 7% 8% *T 75% RH ELECTRICL INPUT * Self contained with fully automatic operation Integral humidistat Polyester coated evaporator and condenser Plastisol coated galvanised steel cabinet Reverse cycle defrost for very low temperature operation For applications see page 56 Options Top or rear fan outlet (DH 15/6 only) High pressure fan Return air filter Condensate pump Compressor soft start Top discharge box Heat recovery to water External condenser unit Remote humidistat Specifications Units DH 6BY Operating temperature range 3/6% RH Heat recovered to 3/6% RH ir flow External static pressure Sound pressure 3m Refrigerant Power supply Nominal power consumption FL Maximum supply fuse LR (compressor start) LR (compressor soft-start) Product size (w x d x h) Weight Condensate drain size (flexible plastic hose) l/24h m 3 /h Pa db() V/Hz kg inch R47c 4/3ph/ x 125 x ½ BSPM 58

59 HIGH CPCITY DEHUMIDIFIERS DUCTED 3 5 Up to 4.5 l/h dehumidification capacity (3/6% RH) Up to 18m 3 /h air flow (5) Constant flow fan with two speed settings Remote control panel (12V) with 1.8m lead (1m cable optional) LPHW ir models add: Integral LPHW heat exchanger for air heating FLNGE KIT Changing rooms Production areas Warehouses Pools Options Flexible flange kit to reduce vibration Specifications Units 3 5 Operating conditions 3/6% RH ir flow External static pressure l/h m³/h Pa ± 1% ± 1% 25 Heat recovered to 3/6% RH Heat to air via optional LPHW Nominal power consumed Min. supply capacity (max. FL) Max. supply fuse 2 2 Sound 1m db() Product size (h x w x d) 85 x 127 x x 127 x 73 Weight kg

60 HIGH CPCITY DEHUMIDIFIERS DUCTED Dynamic heat pump heat recovery Constant flow EC fan (models 6, 9, 12) Speed controllable EC fan (model 15) PLC control with 3.5" touchscreen user interface Remote monitoring/control Options Fresh air module Upgraded LPHW heat exchanger for air Electric resistance air heaters (6/12/18) ir cooling with remote condenser Integral LPHW heat exchanger for air heating Electrical heater option notes VRIHET TOUCHSCREEN In lieu of LPHW heat exchangers 6 or 12 is available for 6 and 9 models 12 or 18 is available for 12 and 15 models Data centres Electronic equipment rooms Sensitive materials storage Specifications Units ir flow External available static pressure Fresh air flow (option) External available static 3 o C/6% RH 3 o C/7% RH Heat to air Net via heat pump Via standard 8 o C Max available (heat pump + standard LPHW) Via upgraded 55 o C Max available (heat pump + upgraded LPHW) 6 m 3 /h Pa m 3 /h Pa l/h l/h Nominal power consumed denotes heat recovery to air and optional LPHW heater for air only

61 HIGH TEMPERTURE PROCESS DRYING FLOOR STNDING Litres/hour Performance data Overheat zone 7 Overload zone 6 DH ir %RH 5 Defrost zone Rapid moisture removal at lowest cost per litre extracted Latent energy reclaimed to reduce power consumption Drying at lower temperatures reduces risk of heat damage Even drying improves product quality Low maintenance Options Range of Calorex control panels Stainless steel cabinet Steam or LPHW heat exchangers for initial heat input Castors for portability to aid cleaning and maintenance ir inlet filters Ceramics and timber Confectionery and food manufacturing Brick, block and tile Textiles, paper and cardboard Specifications Units DH 334BH Operating temperature range 5/6% RH Heat to air via dehumidification Heat to air via resistance heaters and dehumidification ir flow External static pressure Sound pressure 3m Refrigerant Power supply Nominal power consumed Min. supply capacity Max. supply fuse Heater rating FL Nominal power consumed LR RL Nominal running current Product size (w x d x h) Weight l/h m³/h Pa db() V/Hz kg R134a 4/3ph/ x 7 x

62 INDUSTRIL DRYING DSORPTION DT 16 DT 25 Sturdy housing in stainless steel Low weight PTC reactivation heater, eliminates the risk for overheating and allows step-less capacity control The desiccant rotor, including its transmission element and fan, can be easily lifted out of the housing for external inspection and service Optional accessories External humidistat connection Floor stand Wall bracket Process air systems Store rooms Pharmaceutical production Pumping stations Film production Electronics manufacturing Confectionery and food production Museums and art galleries Cold storage Specifications Units DT 16 DT 25 DT 44 2/6% RH kg/h Dry air flow (free blowing) m 3 /h vailable pressure Pa Wet air flow m 3 /h vailable pressure Pa Power consumption Power supply V/Hz 23/1ph/5 23/1ph/5 23/1ph/5 Sound level db() Reactivation power Electrical (E), steam (S), gas (G) react. option E E E Filter class Product size (l x w x h) 324 x 329 x x 351 x x 351 x 357 Weight kg

63 INDUSTRIL DRYING DSORPTION DT 21 DT 4 Sturdy housing in stainless steel Low weight PTC reactivation heater, eliminates the risk for overheating and allows step-less capacity control The desiccant rotor, including its transmission element and fan, can be easily lifted out of the housing for external inspection and service Optional accessories External humidistat connection ir cooled condenser (DT 21/45 only) Floor stand Wall bracket Process air systems Store rooms Pharmaceutical production Pumping stations Film production Electronics manufacturing Confectionery and food production Museums and art galleries Cold storage Specifications Units DT 21 DT 4 DT 45 2/6% RH kg/h Dry air flow m 3 /h vailable pressure Pa 3 Wet air flow m 3 /h vailable pressure Pa Power consumption Power supply V/Hz 23/1ph/5 23/1ph/5 23/1ph/5 Sound level db() Reactivation power Electrical (E), steam (S), gas (G) react. option E E E Filter class Product size (l x w x h) 315 x 315 x x 428 x x 428 x Weight kg

64 INDUSTRIL DRYING DSORPTION DT 8 DT 11 Sturdy housing in stainless steel Controls including, humidity sensor operation, alarm system, and different options for dry air fan operation PTC (Positive Temperature Control) reactivation heater, eliminates the risk of overheating and allows step-less capacity control Optional accessories ir cooled condenser DDC controls Process air systems Store rooms Pharmaceutical production Pumping stations Film production Electronics manufacturing Confectionery and food production Museums and art galleries Cold storage Specifications Units DT 8 DT 11 2/6% RH kg/h Dry air flow m 3 /h 8 11 vailable pressure Pa 15 2 Wet air flow m 3 /h vailable pressure Pa Power consumption 7 1 Power supply V/Hz 4/3ph/5 4/3ph/5 Sound level db() 6 62 Reactivation power Electrical (E), steam (S), gas (G) react. option E E Filter class 3 3 Product size (l x w x h) 15 x 6 x x 6 x 69 Weight kg

65 INDUSTRIL DRYING DSORPTION DT 13 DT 23 DT 33 Insulated housing in stainless steel PTC reactivation heater, eliminates the risk of overheating and allows step-less capacity control Built-in PLC with touch screen as standard Rotation guard, filter alarm, run-time-meter and service alarm as standard Optional accessories ir cooled condenser Moisture control via external moisture sensor Step-less control via -1V signal Counication with building management system via Modbus, Canbus or via Web server Process air systems Store rooms Pharmaceutical production Pumping stations Film production Electronics manufacturing Confectionery and food production Museums and art galleries Cold storage Specifications Units DT 13 DT 23 DT 33 2/6% RH kg/h Dry air flow m 3 /h vailable pressure Pa Wet air flow m 3 /h vailable pressure Pa Power consumption Power supply V/Hz 4/3ph/5 4/3ph/5 4/3ph/5 Sound level db() Reactivation power Electrical (E), steam (S), gas (G) react. option E/S/G E/S/G E/S/G Filter class Product size (l x w x h) 1199 x 87 x x 87 x x 87 x 117 Weight kg

66 INDUSTRIL DRYING DSORPTION DT 35 Insulated housing in stainless steel PTC reactivation heater, eliminates the risk of overheating and allows step-less capacity control Built-in PLC with touch screen as standard Rotation guard, filter alarm, run-time-meter and service alarm as standard Optional accessories ir cooled condenser Moisture control via external moisture sensor Step-less control via -1V signal Counication with building management system via Modbus, Canbus or via Web server Process air systems Store rooms Pharmaceutical production Pumping stations Film production Electronics manufacturing Confectionery and food production Museums and art galleries Cold storage Specifications Units DT 35 2/6% RH kg/h 19.2 Dry air flow m 3 /h 35 vailable pressure Pa 17 Wet air flow m 3 /h 85 vailable pressure Pa 26 Power consumption 28.7 Power supply V/Hz 4/3ph/5 Sound level db() 71 Reactivation power 26 Electrical (E), steam (S), gas (G) react. option E/S/G Filter class 4 Product size (l x w x h) 1199 x 87 x 117 Weight kg 21 66

67 INDUSTRIL DRYING DSORPTION DT 45 DT 58 Insulated housing in stainless steel Controls including, humidity sensor operation, alarm system, and different options for dry air fan operation Reactivation heater type according to customer specifications Optional accessories ir cooled condenser DDC controls Process air systems Store rooms Pharmaceutical production Pumping stations Film production Electronics manufacturing Confectionery and food production Museums and art galleries Cold storage Specifications Units DT 45 DT 58 2/6% RH kg/h Dry air flow m 3 /h vailable pressure Pa 8 42 Wet air flow m 3 /h vailable pressure Pa Power consumption Power supply V/Hz 4/3ph/5 4/3ph/5 Sound level db() Reactivation power Electrical (E), steam (S), gas (G) react. option E/S/G E/S/G Filter class 4 4 Product size (l x w x h) 18 x 116 x x 116 x 1221 Weight kg

68 INDUSTRIL DRYING DSORPTION DT 6 Insulated housing with panels and inspection doors Possible to transport by forklift Internal purge zone reducing energy consumption and increasing the capacity Control system Process air systems Store rooms Pharmaceutical production Pumping stations Film production Electronics manufacturing Confectionery and food production Museums and art galleries Cold storage DT 8 Specifications Units DT 6 DT 8 2/6% RH kg/h Dry air flow m 3 /h 6 8 vailable pressure Pa Wet air flow m 3 /h vailable pressure Pa Power consumption Power supply V/Hz 4/3ph/5 4/3ph/5 Sound level db() Reactivation power Electrical (E), steam (S), gas (G) react. option E/S/G E/S/G Filter class 4 4 Product size (l x w x h) 2 x 135 x x 135 x 178 Weight kg

69 INDUSTRIL DRYING DSORPTION DT 13 Insulated housing with panels and inspection doors Possible to transport by forklift Internal purge zone reducing energy consumption and increasing the capacity Control system Process air systems Store rooms Pharmaceutical production Pumping stations Film production Electronics manufacturing Confectionery and food production Museums and art galleries Cold storage DT 27 Specifications Units DT 13 DT 19 DT 27 2/6% RH kg/h Dry air flow m 3 /h vailable pressure Pa Wet air flow m 3 /h vailable pressure Pa Power consumption Power supply V/Hz 4/3ph/5 4/3ph/5 4/3ph/5 Sound level db() Reactivation power Electrical (E), steam (S), gas (G) react. option E/S/G E/S/G E/S/G Filter class Product size (l x w x h) 225 x 16 x x 19 x x 19 x 25 Weight kg

70 INDUSTRIL DRYING FREEZER ROOMS cold room DTI 36 Prevention of ice build-up on chiller coils Prevention of ice build-up on walls Prevention of ice build-up on stored products Prevention of ice build-up on shelves/racking Reduced/infrequent defrost cycles Clean dry floors Elimination of poor visibility due to fogging Dry floors in entrances and airlocks Reduced energy consumption react wet air react air process wet air dry air absence of frosting and snow coat t=-25 o C Cold storage moisture load cold air clean dry floor clean dry floor air lock Specifications Units DTI 15 DTI 26 DTI 36 DTI 4 DTI 5 Dry air flow m 3 /h Wet air flow m 3 /h Total power connection Total power connection N/ (with heat exchanger) Maximum capacity at -18 o C kg/h Dimensions inside version 1199 x 87 x x 87 x x 87 x x 87 x x 116 x 1221 Dimensions outside version 1339 x 947 x x 947 x x 947 x x 947 x 1245 N/ 7