Quality Built, American Made. Medical Equipment. Full Product Line Catalog.

Transcription

1 Quality Built, American Made Medical Equipment Full Product Line Catalog

2 Table of Contents ABOUT MAC MEDICAL, INC. MAC Medical, Inc. concentrates in manufacturing the highest quality medical equipment available. Utilizing state-of-the-art equipment such as a 3D CAD solid modeling system, a fully automated fabrication department line, and highly skilled craftsman make it possible to produce equipment unparalleled in the marketplace. Started in 1998, our company has grown to over 100 full-time employees operating in a 100,000 square foot manufacturing plant. More recently, a new corporate office was established housing departments such as engineering, customer service, accounting, and marketing. With no project too large or too small for our capability, we are committed to providing solutions for your custom needs with our American made products. Customer needs are our first priority. For questions or to place an order, contact our customer service department at or , or by at sales@macmedical.com. Corporate Office 015 Manufacturing Plant 00 Dennis Cooper President Stacey Cooper Vice President Corporate Office 35 West Main Street Belleville, IL 60 Manufacturing Plant 80 South Mulberry Street Millstadt, IL 660 Phone: Toll Free: Fax: sales@macmedical.com Warranty All products manufactured by MAC Medical, Inc. will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer's expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from MAC Medical, Inc. must be obtained prior to items return. Blanket & Fluid Warming Cabinets (Data Logging) Overview 4 TS-Series (Touch Screen) Overview 5 Chamber Units 6 Chamber Units 8 Triple Chamber Units 10 Mobile Stands, Mobile Bases, & Baskets 10 vs. TS-Series Comparison 11 Options & How to Order 1 TS-Series Options & How to Order 13 Transport & Eye Stretchers 14 General Transport Stretcher 15 5th Wheel Transport Stretcher 16 5th Wheel Eye Stretcher (Discontinued) 17 Stretcher Features 18 Stretcher Comparison 19 Stainless Steel Sinks 0 Surgical Scrub Sinks (SS-Series) 1 Surgical Scrub Sinks (ES-Series) 3 Processing Sinks (Pipe Base Units) 4 Processing Sinks (Cabinet Base Units) 5 Stainless Steel Cabinets 6 Wall Cabinets 7 Base Cabinets 7 Desk Cabinets 8 Supply Cabinets 9 Nurses Documentation Stations 30 Configured Cabinets 31 Stainless Steel Tables 3 Instrument Tables 33 Utility Tables 34 Nested Tables 34 Work Tables 35 Space Saver Tables 35 Adjustable Over Operating Tables 36 Central Supply Tables 36 Prep & Pack Workstations 37 New New New New Stainless Steel Carts 38 Closed Case Carts 39 Open Case Carts 40 Vertical Handle Case Carts 41 Stainless Steel Stands 4 Solution Stands 43 IV Stands 44 Mayo Stands 45 Other Stainless Steel Products 46 Linen Hampers 47 Kick Buckets 48 Step Stools 48 Wall Shelves 49 Pass Through Windows 50 Peg Boards 51 New New MR Conditional Products 5 MR Mayo Stands 53 MR Solution Stands 53 MR Linen Hampers 54 MR Kick Buckets 55 MR IV Stands 55 MR Step Stools 55 MR Instrument Tables 56 Contact Us 57 Look for this logo! Ergonomically Friendly New New New Call Toll Free: Table of Contents

3 Blanket & Fluid Warming Cabinets We offer a variety of Blanket & Fluid Warming Cabinets to help compliment and enhance your facility. As with all of our products, warming cabinets undergo stringent testing procedures during the manufacturing process to assure a long life, the highest quality, and accurate temperature settings. We offer standard sizes along with custom sizes to meet specific requirements. Data Logging Warming Cabinets TS-Series Touch Screen Warming Cabinets MAC Medical, Inc. is proud to offer both our (Data Logging) and TS-Series (Touch Screen) Blanket & Fluid Warming Cabinets. Both series provide the perfect blend of technology, value, and customer support in the industry. The Warming Cabinets are the most user-friendly temperature recording devices on the market today. These warmers are equipped with independent, digitally controlled heating chambers that offer actual temperature and set point displays. The Ethernet/Wi-Fi enabled TS-Series Warming Cabinets offer unparalleled technology by allowing remote connectivity to your warmer (via smart phone app) and giving you control of your warmer wherever you are. The is available in single, dual, and triple chamber units, while the TS-Series is available in single and dual chamber units. Both series require no additional software and have many optional features to choose from. Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

4 Warming Cabinets NEXT the generation of warming cabinets Premium Upgrade TS-Series Warming Cabinets LEADING technology The new (Data Logging) Blanket & Fluid Warming Cabinets provide independent, digitally controlled heating chambers that offer actual temperature and set point displays. Data is recorded every 30 minutes and stored for up to two years. DWC43074E (shown with standard 4" base and optional glass door) The Ethernet/Wi-Fi enabled TS-Series Warming Cabinets offer unparalleled technology by allowing remote connectivity to your warmer (via smart phone app) and giving you control of your warmer wherever you are. DWC43074T-TS (shown with standard 4" base, optional glass door and roll out baskets) OFF OFF ON ON Chamber Header Control Header Control For TS-Series Units "Easy Log" integrated data logger with removable USB now standard! Keyed door lock for single & upper chamber units now standard! Adjustable feet now standard! Automatically records data every 30 minutes Internal storage up to years Displays actual temperature and set points at all times Independent digitally controlled heating chambers Rapid warm time (-6 hours depending on load) Keyed temperature lock out Push button digital operation Large dual digital displays Fully insulated to provide uniform heating Audible & visual over-temp alarm Remote alarm output Full view glass door Left hand door hinge Mobile base 0/40V power supply Celsius Two () recessed unit options Seismic braces Pass through chamber Roll out basket(s) with cool touch handles Sloped top Keyed door lock for intermediate & lower chamber units Electronic keypad lock Custom sizes available To Download Data 1. Insert supplied USB flash drive into USB slot.. Data download will automatically begin. 3. During download display will read: 4. Once the display shows the temperature again, it is safe to remove the flash drive. 5. Data is saved on the flash drive as a.csv file for easy import into most spreadsheet programs (e.g. Microsoft Excel). 6. Data is secure (no reporting or connection to any network). Sample Report SWC43074, S/N: 0611-D01, DATE/TIME 3/10/016 3:1 3/10/016 3:43 3/11/016 0:1 3/11/016 0:43 3/11/016 1:1 R FDA Listed TEMPERATURE OSHPD Pre-Approved C/ F F F F F F Intuitive touch screen control Intuitive software (supports multiple languages) FDC compliant Data Logging with Digital Signatures View live trends Alarm logging Multi-level user security Operator audit trail Built in Ethernet & Wi-Fi ready Remote monitoring & control (VNC) Remote tech support & diagnostics Text and alarm notifications File transfer via USB or FTP web page Smart phone/device access Top chamber integrated door lock Check on the status of your warmer(s) with your smart phone device Manage multiple warmers remotely or locally, via Ethernet or Wi-Fi Full view glass door Left hand door hinge Mobile base or stand 0/40V power supply Celsius Two () recessed unit options Seismic braces Pass through chamber Roll out basket(s) with cool touch handles Sloped top Keyed door lock for lower chamber units Electronic keypad lock Custom sizes available Optional roll out basket makes organization and item selection easy. Cool touch handles keep your hands from getting burned. 4 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets R FDA Listed OSHPD Pre-Approved

5 Blanket & Fluid Warming Cabinets Chamber Units Blanket & Fluid Warming Cabinets Chamber Units SWC1518 ( only) 15.5"D x 18"W x "H (393.7mm x 457.mm x 558.8mm) Optional Adjustable Shelf Chamber I.D. 13"D x 14"W x 13"H (330.mm x 355.6mm x 330.mm) 1.37 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 10V,.9 Amp, 50/60 Hz,.3 kwh (Avg.), 785 BTU/hr (Avg.) 3-5 Blankets & 9 Solution Bottles (1 Liter Each) MS1518 Mobile Stand WB1518 No base (NB) standard for this model SWC1844 () SWC1844-TS (TS-Series) 0.5"D x 4"W x 4.5"H (50.7mm x 609.6mm x 6.3mm) Optional Adjustable Shelf Chamber I.D. 17"D x 0"W x 15.5"H (431.8mm x 508mm x 387.3mm) 3.0 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 10V,.9 Amp, 50/60 Hz,.3 kwh (Avg.), 785 BTU/hr (Avg.) 8-1 Blankets & 0 Solution Bottles (1 Liter Each) MS184 Mobile Stand WB184 No base (NB) standard for this model SWC18464 () SWC18464-TS (TS-Series) 0.5"D x 4"W x 64.75"H (50.7mm x 609.6mm x 1645mm) 3 Adjustable Shelves Chamber I.D. 17"D x 0"W x 49.5"H (431.8mm x 508mm x 157mm) 9.74 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 10V, 6.5 Amp, 50/60 Hz,.47 kwh (Avg.), 1604 BTU/hr (Avg.) Blankets & 66 Solution Bottles (1 Liter Each) MB184 Mobile Base WB184 4" base (4B) standard for this model SWC () SWC TS (TS-Series) 0.5"D x 30"W x 64.75"H (50.7mm x 76mm x 1645mm) 3 Adjustable Shelves Chamber I.D. 17"D x 6"W x 51"H (431.8mm x 660.4mm x 195mm) Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 10V, 6.3 Amp, 50/60 Hz,.41 kwh (Avg.), 1400 BTU/hr (Avg.) Blankets & 89 Solution Bottles (1 Liter Each) MB1830 Mobile Base WB1830 4" base (4B) standard for this model SWC18304 () SWC18304-TS (TS-Series) 0.5"D x 30"W x 4.5"H (50.7mm x 76mm x 6.3mm) 1 Adjustable Shelf Chamber I.D. 17"D x 6"W x 15.5"H (431.8mm x 660.4mm x 387.3mm) 3.9 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 10V, 6.3 Amp, 50/60 Hz,.45 kwh (Avg.), 1535 BTU/hr (Avg.) 9-11 Blankets & 6 Solution Bottles (1 Liter Each) MS1830 Mobile Stand WB1830 No base (NB) standard for this model SWC4304 () SWC4304-TS (TS-Series) 6.5"D x 30"W x 4.5"H (673.1mm x 76mm x 6.3mm) 1 Adjustable Shelf Chamber I.D. 3"D x 6"W x 15.5"H (584.mm x 660.4mm x 387.3mm) 5.7 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 10V, 6.3 Amp, 50/60 Hz,.45 kwh (Avg.), 1535 BTU/hr (Avg.) 1-15 Blankets & 36 Solution Bottles (1 Liter Each) MS430 Mobile Stand WB430 No base (NB) standard for this model SWC () SWC TS (TS-Series) 0.5"D x 30"W x 74.5"H (50.7mm x 76mm x 189mm) Adjustable Shelves, 1 Fixed Shelf Chamber I.D. 17"D x 6"W x 61"H (431.8mm x 660.4mm x 1549mm) Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 10V, 6.5 Amp, 50/60 Hz,.47 kwh (Avg.), 1604 BTU/hr (Avg.) 5-66 Blankets & 105 Solution Bottles (1 Liter Each) MB1830 Mobile Base WB1830 SWC43074 () SWC43074-TS (TS-Series) 6.5"D x 30"W x 74.5"H (673.1mm x 76mm x 189mm) Adjustable Shelves, 1 Fixed Shelf Chamber I.D. 3"D x 6"W x 61"H (584.mm x 660.4mm x 1549mm) 1.1 Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 10V, 6.3 Amp, 50/60 Hz,.47 kwh (Avg.), 1604 BTU/hr (Avg.) Blankets & 143 Solution Bottles (1 Liter Each) MB430 Mobile Base WB430 SWC () SWC TS (TS-Series) 0.5"D x 30"W x 36"H (50.7mm x 76mm x 914.4mm) Adjustable Shelves Chamber I.D. 17"D x 6"W x 5"H (431.8mm x 660.4mm x 635mm) 6.39 Cubic Feet Storage Temperature Range F (Tolerance +/- F) 10V, 5.7 Amp, 50/60 Hz,.45 kwh (Avg.), 1535 BTU/hr (Avg.) -9 Blankets & 53 Solution Bottles (1 Liter Each) MS1830 Mobile Stand WB1830 " base (B) standard for this model SWC43036 () SWC43036-TS (TS-Series) 6.5"D x 30"W x 36"H (673.1mm x 76mm x 914.4mm) Adjustable Shelves Chamber I.D. 3"D x 6"W x 5"H (584.mm x 660.4mm x 635mm) 8.65 Cubic Feet Storage Temperature Range F (Tolerance +/- F) 10V, 6.3 Amp, 50/60 Hz,.45 kwh (Avg.), 1535 BTU/hr (Avg.) Blankets & 7 Solution Bottles (1 Liter Each) MS430 Mobile Stand WB430 " base (B) standard for this model Warranty All products manufactured by MAC Medical, Inc. will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer's expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from MAC Medical, Inc. must be obtained prior to items return. 4" base (4B) standard for this model 4" base (4B) standard for this model 6 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

6 Blanket & Fluid Warming Cabinets Chamber Units Blanket & Fluid Warming Cabinets Chamber Units DWC18464T () DWC18464T-TS (TS-Series) (T = Chambers in Thirds) DWC183064T () DWC183064T-TS (TS-Series) (T = Chambers in Thirds) DWC4474T () DWC4474T-TS (TS-Series) (T = Chambers in Thirds) 6.5"D x 4"W x 74.5"H (673.1mm x 609.6mm x 189mm) 13.4 Cubic Feet Storage, 3 Adjustable Shelves DWC43074T () DWC43074T-TS (TS-Series) (T = Chambers in Thirds) 6.5"D x 30"W x 74.5"H (673.1mm x 76mm x 189mm) 17.1 Cubic Feet Storage, 3 Adjustable Shelves 0.5"D x 4"W x 64.75"H (50.7mm x 609.6mm x 1645mm) 7.47 Cubic Feet Storage, 3 Adjustable Shelves 0.5"D x 30"W x 64.75"H (50.7mm x 76mm x 1645mm) 9.7 Cubic Feet Storage, 3 Adjustable Shelves Upper Chamber I.D. 17"D x 0"W x 13.5"H (431.8mm x 508mm x 34.9mm).65 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Upper Chamber I.D. 17"D x 6"W x 13.5"H (431.8mm x 660.4mm x 34.9mm) 3.45 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Upper Chamber I.D. 3"D x 0"W x 15.5"H (584.mm x 508mm x 387.3mm) 4.06 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Upper Chamber I.D. 3"D x 6"W x 15.5"H (584.mm x 660.4mm x 387.3mm) 5.8 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Lower Chamber I.D. 17"D x 0"W x 4.5"H (431.8mm x 508mm x 6.3mm) 4.8 Cubic Feet Storage Temperature Range F (Tolerance +/- F) 10V, 8.9 Amp, 50/60 Hz,.65 kwh (Avg.), 18 BTU/hr (Avg.) Lower Chamber I.D. 17"D x 6"W x 4.5"H (431.8mm x 660.4mm x 6.3mm) 6.7 Cubic Feet Storage Temperature Range F (Tolerance +/- F) 10V, 8.3 Amp, 50/60 Hz,.60 kwh (Avg.), 047 BTU/hr (Avg.) Lower Chamber I.D. 3"D x 0"W x 34.5"H (584.mm x 508mm x 876.3mm) 9.18 Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 10V, 8.9 Amp, 50/60 Hz,.65 kwh (Avg.), 18 BTU/hr (Avg.) Lower Chamber I.D. 3"D x 6"W x 34.5"H (584.mm x 660.4mm x 876.3mm) Cubic Feet Storage Temperature Range F (Tolerance +/- 3 F) 10V, 1.5 Amp, 50/60 Hz,.90 kwh (Avg.), 3071 BTU/hr (Avg.) 14- Blankets & 4 Solution Bottles (1 Liter Each) MB184 Mobile Base WB Blankets & 54 Solution Bottles (1 Liter Each) MB1830 Mobile Base WB1830 4" base (4B) standard for this model 4" base (4B) standard for this model 5-40 Blankets & 93 Solution Bottles (1 Liter Each) MB44 Mobile Base WB Blankets & 114 Solution Bottles (1 Liter Each) MB430 Mobile Base WB430 4" base (4B) standard for this model 4" base (4B) standard for this model DWC18474T () DWC18474T-TS (TS-Series) (T = Chambers in Thirds) 0.5"D x 4"W x 74.5"H (50.7mm x 609.6mm x 189mm) 9.44 Cubic Feet Storage, 3 Adjustable Shelves DWC183074T () DWC183074T-TS (TS-Series) (T = Chambers in Thirds) 0.5"D x 30"W x 74.5"H (50.7mm x 76mm x 189mm) 1.7 Cubic Feet Storage, 3 Adjustable Shelves DWC183074E () DWC183074E-TS (TS-Series) (E = Equal Chambers) 0.5"D x 30"W x 74.5"H (50.7mm x 76mm x 189mm) Cubic Feet Storage, 4 Adjustable Shelves DWC43074E () DWC43074E-TS (TS-Series) (E = Equal Chambers) 6.5"D x 30"W x 74.5"H (673.1mm x 76mm x 189mm) Cubic Feet Storage, 4 Adjustable Shelves Upper Chamber I.D. 17"D x 0"W x 15.5"H (431.8mm x 508mm x 387.3mm).65 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Upper Chamber I.D. 17"D x 6"W x 15.5"H (431.8mm x 660.4mm x 387.3mm) 3.45 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Upper Chamber I.D. 17"D x 6"W x 5"H (431.8mm x 660.4mm x 635mm) 6.39 Cubic Feet Storage Temperature Range F (Tolerance +/- F) Upper Chamber I.D. 3"D x 6"W x 5"H (584.mm x 660.4mm x 635mm) 8.65 Cubic Feet Storage Temperature Range F (Tolerance +/- F) Lower Chamber I.D. 17"D x 0"W x 34.5"H (431.8mm x 508mm x 876.3mm) 6.79 Cubic Feet Storage Temperature Range F (Tolerance +/- F) 10V, 8.9 Amp, 50/60 Hz,.65 kwh (Avg.), 18 BTU/hr (Avg.) 0-8 Blankets & 53 Solution Bottles (1 Liter Each) MB184 Mobile Base WB184 4" base (4B) standard for this model Lower Chamber I.D. 17"D x 6"W x 34.5"H (431.8mm x 660.4mm x 876.3mm) 8.8 Cubic Feet Storage Temperature Range F (Tolerance +/- F) 10V, 8.9 Amp, 50/60 Hz,.8 kwh (Avg.), 798 BTU/hr (Avg.) 8-38 Blankets & 66 Solution Bottles (1 Liter Each) MB1830 Mobile Base WB1830 4" base (4B) standard for this model Lower Chamber I.D. 17"D x 6"W x 6"H (431.8mm x 660.4mm x 660.4mm) 6.65 Cubic Feet Storage Temperature Range F (Tolerance +/- F) 10V, 11.4 Amp, 50/60 Hz,.8 kwh (Avg.), 798 BTU/hr (Avg.) Blankets & 74 Solution Bottles (1 Liter Each) MB1830 Mobile Base WB1830 Lower Chamber I.D. 3"D x 6"W x 6"H (584.mm x 660.4mm x 660.4mm) 8.99 Cubic Feet Storage Temperature Range F (Tolerance +/- F) 10V, 1.5 Amp, 50/60 Hz,.90 kwh (Avg.), 3071 BTU/hr (Avg.) Blankets & 101 Solution Bottles (1 Liter Each) MB430 Mobile Base WB430 4" base (4B) standard for this model 4" base (4B) standard for this model 8 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

7 Which Warming Cabinet is right for your facility? TWC ( only) 0.5"D x 30"W x 78.75"H (50.7mm x 76mm x 000mm) Cubic Feet Storage, 1 Adjustable Shelf Upper Chamber I.D. 17"D x 6"W x 11.5"H (431.8mm x 660.4mm x 85.7mm).88 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Intermediate Chamber I.D. 17"D x 6"W x 10.75"H (431.8mm x 660.4mm x 73mm).75 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Lower Chamber I.D. 17"D x 6"W x 18.5"H (431.8mm x 660.4mm x 469.9mm) 4.73 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 10V, 1.9 Amp, 50/60 Hz,.90 kwh (Avg.), 3071 BTU/hr (Avg.) -9 Blankets & 55 Solution Bottles (1 Liter Each) MB1830 Mobile Base WB1830 Blanket & Fluid Warming Cabinets Triple Chamber Units TWC43078 ( only) 6.5"D x 30"W x 78.75"H (673.1mm x 76mm x 000mm) Cubic Feet Storage, 1 Adjustable Shelf Upper Chamber I.D. 3"D x 6"W x 11.5"H (584.mm x 660.4mm x 85.7mm) 3.89 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Intermediate Chamber I.D. 3"D x 6"W x 10.75"H (584.mm x 660.4mm x 73mm) 3.7 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) Lower Chamber I.D. 3"D x 6"W x 18.5"H (584.mm x 660.4mm x 469.9mm) 6.4 Cubic Feet Storage Temperature Range F (Tolerance +/- 1 F) 10V, 1.9 Amp, 50/60 Hz,.90 kwh (Avg.), 3071 BTU/hr (Avg.) Blankets & 75 Solution Bottles (1 Liter Each) MB430 Mobile Base WB430 4" base (4B) standard for this model 4" base (4B) standard for this model vs. TS-Series Comparison Chart Standard Features "Easy Log" integrated data logger with removable USB Internal storage up to years Keyed temperature lock out Push button digital operation Large dual digital displays Automatically records data every 30 minutes Displays actual temperature and set points at all times Independent digitally controlled heating chambers Rapid warm time (-6 hours depending on load) Keyed door lock for single & upper chamber units Adjustable feet Fully insulated to provide uniform heating Audible & visual over-temp alarm Electronic temperature lock out Remote alarm output Intuitive touch screen control Intuitive software (supports multiple languages) FDC compliant data logging with digital signatures View live trends Alarm logging Multi-level user security Operator audit trail Built in Ethernet & Wi-Fi ready Remote monitoring & control (VNC) via smart phone Remote tech support & diagnostics Text & alarm notifications File transfer via USB or FTP web page (Data Logging) TS-Series (Touch Screen) Optional Features (Data Logging) TS-Series (Touch Screen) Mobile Stands, Mobile Bases, and Baskets Mobile Stands Mobile Bases Model # Model # MS1518 1"W x 18"D x 34"H MB184 7"W x "D x 6.75"H s Model # WB "W x 11.8"D x 4.875"H Full view glass door Left hand door hinge Mobile base or stand 0/40V power supply Celsius Two () recessed unit options Seismic braces Pass through chamber Roll out basket(s) with cool touch handles Sloped top Keyed door lock for intermediate chambers* Keyed door lock for lower chambers * * MS184 MS1830 MS430 8"W x 0"D x 34"H 34"W x 0"D x 34"H 34"W x 6"D x 34"H MB1830 MB44 MB430 33"W x "D x 6.75"H 7"W x 8"D x 6.75"H 33"W x 8"D x 6.75"H WB184 WB1830 WB "W x 15.8"D x 4.875"H 17.6"W x 15.8"D x 4.875"H 17.6"W x 5.3"D x 4.875"H Electronic Keypad Lock * ** Custom sizes available * Only available for Triple Chamber Units ** Only available for and Triple Chamber Units *** Only available for Chamber Units Note: All warming cabinet mobile stands, mobile bases, and baskets are sold separately. WB "W x 5.3"D x 4.875"H For questions or to place an order, contact our customer service department at or , or by at sales@macmedical.com. 10 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

8 OFF ON OFF ON Options TS-Series Options Sloped Top (ST) Stainless Steel Door (Standard) Right Hinge (Standard) Left Hinge (LH) Glass Door (GD) No Base (NB) How to Order (WB) Door Types Stainless Steel (Standard) Glass Door Hinges Right (Standard) Left Base Styles " (not available for SWC1518) 4" (not available for SWC1518) 6" (not available for SWC1518) No Base Mobile Base Note: Additional shelving available for purchase. Other Options 0/40V Power Supply Celsius Two () Recessed Unit Options: R1 = Insulation Wrap, No Top Panel, No Side Panels, and No Trim Kit R = Top Panel, Side Panels, and Trim Kit Seismic Braces (s) Pass Through Chamber Sloped Top (not available for SWC1518) Intermediate Chamber Door Lock (only available for Triple Chamber Units) Lower Chamber Door Lock (only available for and Triple Chamber Units) Electronic Keypad Lock (only available for Chamber Units) Sloped Top (ST) Stainless Steel Door (Standard) Right Hinge (Standard) Left Hinge (LH) Glass Door (GD) No Base (NB) (WB) How to Order TS-Series Door Types Stainless Steel (Standard) Glass Door Hinges Right (Standard) Left Base Styles " (not available for SWC1518) 4" (not available for SWC1518) 6" (not available for SWC1518) No Base Mobile Base Note: Additional shelving available for purchase. Other Options 0/40V Power Supply Celsius Two () Recessed Unit Options: R1 = Insulation Wrap, No Top Panel, No Side Panels, and No Trim Kit R = Top Panel, Side Panels, and Trim Kit Seismic Braces (s) Pass Through Chamber Sloped Top Lower Chamber Door Lock Electronic Keypad Lock (only available for Chamber Units) Base Model # Chambers Door Type Door Hinge Base Style Other Options Base Model # Chambers Door Type Door Hinge Base Style Other Options SWC "D x 18"W x "H SWC "D x 4"W x 4.5"H SWC "D x 4"W x 4.5"H SWC "D x 30"W x 4.5"H SWC "D x 30"W x 4.5"H SWC "D x 30"W x 36"H SWC "D x 30"W x 36"H SWC "D x 4"W x 64.75"H SWC "D x 4"W x 64.75"H SWC "D x 30"W x 64.75"H SWC "D x 30"W x 64.75"H SWC "D x 30"W x 74.5"H SWC "D x 30"W x 74.5"H DWC18464T* 0.5"D x 4"W x 64.75"H DWC4464T* 6.5"D x 4"W x 64.75"H DWC183064T* 0.5"D x 30"W x 64.75"H DWC43064T* 6.5"D x 30"W x 64.75"H DWC18474T* 0.5"D x 4"W x 74.5"H DWC183074T** 0.5"D x 30"W x 74.5"H DWC4474T* 6.5"D x 4"W x 74.5"H DWC43074T* 6.5"D x 30"W x 74.5"H DWC183074E** 0.5"D x 30"W x 74.5"H DWC43074E** 6.5"D x 30"W x 74.5"H TWC "D x 30"W x 78.75"H TWC "D x 30"W x 78.75"H * T = Chambers in Thirds ** E = Equal Chambers 1/3 1/ /3 1/ Triple Triple G = Glass Door Blank = Stainless Steel Door (Standard) LH = Left Hinge Blank = Right Hinge (Standard) Example 1: Base Model # SWC18464, Glass Door, Left Hinge, Mobile Base, Sloped Top = Model # SWC18464-G-LH-MB-ST Example : Base Model # DWC43074E, Stainless Steel Door, Right Hinge, 4" Base, Celsius, Lower Chamber Door Lock = Model # DWC43074E-4B-C-LDL Note: Due to the vast number of sizes we have available, not all our models are shown. Please let us know your specific dimensions to get the model that will best suit your needs. If we don't currently have the size you need, we can custom build one for you! B = " Base 4B = 4" Base 6B = 6" Base NB = No Base MB = Mobile Base Not available for SWC1518 Only available for Triple Chamber Units Only available for and Triple Chamber Units Only available for Chamber Units R FDA Listed OSHPD Pre-Approved 0 = 0/40V Power Supply C = Celsius R1 = Recessed Unit with Insulation Wrap, No Top Panel, No Side Panels, and No Trim Kit R = Recessed Unit with Top Panel, Side Panels, and Trim Kit SB = Seismic Braces WB = P = Pass Through Chamber ST = Sloped Top IDL = Intermediate Chamber Door Lock LDL = Lower Chamber Door Lock EL = Electronic Keypad Lock SWC1844-TS SWC444-TS SWC18304-TS SWC4304-TS SWC TS SWC43036-TS SWC18464-TS SWC4464-TS SWC TS SWC43064-TS SWC TS SWC43074-TS DWC18464T*-TS DWC4464T*-TS DWC183064T*-TS DWC43064T*-TS DWC18474T*-TS DWC183074T*-TS DWC4474T*-TS DWC43074T*-TS DWC183074E**-TS DWC43074E**-TS 0.5"D x 4"W x 4.5"H 6.5"D x 4"W x 4.5"H 0.5"D x 30"W x 4.5"H 6.5"D x 30"W x 4.5"H 0.5"D x 30"W x 36"H 6.5"D x 30"W x 36"H 0.5"D x 4"W x 64.75"H 6.5"D x 4"W x 64.75"H 0.5"D x 30"W x 64.75"H 6.5"D x 30"W x 64.75"H 0.5"D x 30"W x 74.5"H 6.5"D x 30"W x 74.5"H 0.5"D x 4"W x 64.75"H 6.5"D x 4"W x 64.75"H 0.5"D x 30"W x 64.75"H 6.5"D x 30"W x 64.75"H 0.5"D x 4"W x 74.5"H 0.5"D x 30"W x 74.5"H 6.5"D x 4"W x 74.5"H 6.5"D x 30"W x 74.5"H 0.5"D x 30"W x 74.5"H 6.5"D x 30"W x 74.5"H * T = Chambers in Thirds ** E = Equal Chambers 1/3 /3 1/ 1/ G = Glass Door Blank = Stainless Steel Door (Standard) For questions or to place an order, contact our customer service department at or , or by at sales@macmedical.com. LH = Left Hinge Blank = Right Hinge (Standard) B = " Base 4B = 4" Base 6B = 6" Base NB = No Base MB = Mobile Base Only available for Chamber Units Only available for Chamber Units Note: Due to the vast number of sizes we have available, not all our models are shown. Please let us know your specific dimensions to get the model that will best suit your needs. If we don't currently have the size you need, we can custom build one for you! 0 = 0/40V Power Supply C = Celsius R1 = Recessed Unit with Insulation Wrap, No Top Panel, No Side Panels, and No Trim Kit R = Recessed Unit with Top Panel, Side Panels, and Trim Kit SB = Seismic Braces WB = P = Pass Through Chamber ST = Sloped Top LDL = Lower Chamber Door Lock EL = Electronic Keypad Lock Example 1: Base Model # SWC18464-TS, Glass Door, Left Hinge, No Base, Sloped Top = Model # SWC18464-TS-G-LH-NB-ST Example : Base Model # DWC43074E-TS, Stainless Steel Door, Right Hinge, 4" Base, Celsius, Lower Chamber Door Lock = Model # DWC43074E-TS-4B-C-LDL R FDA Listed OSHPD Pre-Approved 1 Blanket & Fluid Warming Cabinets Call Toll Free: Blanket & Fluid Warming Cabinets

9 PT-1000 General Transport Stretcher The PT-1000 general transport stretcher allows for easy and comfortable patient transfer with a weight capacity up to 750 lbs. Economical and versatile, this stretcher is an ideal solution for any department where cost-efficient quality is required. PT POUND Weight Capacity Transport & Eye Stretchers Our Transport & Eye Stretchers are designed to ensure safety and efficiency while offering the best blend of features, value, ergonomics, and customer support in the industry. A variety of standard and optional features provide optimal patient comfort. 750 lb. weight capacity Height adjustment range: 3" 35" Ergonomically located oxygen tank holder Easily store and organize fleets with all directional steering and 4 swiveling wheels Fowler assisted lift back rest with 90 adjustability 8" Tente total locking casters 6 brake/steer pedals pedestal lift mechanism Trendelenburg/reverse Trendelenburg +/- 18 Lift/Trendelenburg pedals on both sides Fold forward side rails with built in push handles 9" or 31" bed width 4" comfort mattress hook removable telescopic IV pole 6 IV pole sockets available Large storage area underneath for patient belongings Full perimeter bumper to protect your walls and fixtures 4 restraint belt locations PRODUCT SPECIFICATIONS PT " bed width Overall dimensions: 83 3/8" long x 33 9/16" wide Patient surface dimensions: 75" long x 9 1/8" wide PT (Wide) 31" bed width Overall dimensions: 83 3/8" long x 35 9/16" wide Patient surface dimensions: 75" long x 31 1/8" wide PT /16" ( mm) /16" (995.36mm) 83 3/8" (117.7mm) Outside Length Fold down push handles Manual knee gatch Manual Fowler 33 9/16" (85.49mm) Outside Width 75" (1905mm) Patient Surface 9 1/8" (739.77mm) Patient Surface 14 Transport & Eye Stretchers Call Toll Free: Transport & Eye Stretchers

10 Head Attachment PTF-1000 PTF000-EYE 5th Wheel Transport Stretcher MAC Medical, Inc. is pleased to announce the arrival of the new PTF-1000 fifth wheel transport stretcher. The retractable center fifth wheel combines effortless directional movement and cornering with 4 swiveling wheels for ease of use, control, and safety. 5th Wheel Eye Stretcher 750 POUND Weight Capacity Retractable Fifth Wheel PTF-1000 The PTF000-EYE fifth wheel eye stretcher offers the best blend of features, value, ergonomics, and customer support in the industry. The dual articulating head attachment allows for optimal head clearance and surgeon access. In addition, the retractable fifth wheel mobility allows for increased control, ease of use, and safety. PRODUCT SPECIFICATIONS Retractable fifth wheel provides effortless directional movement and cornering PTF " bed width Quick adjustment dual articulating head attachment 750 lb. weight capacity Height adjustment range: 3" 35" Overall dimensions: 83 3/8" long x 33 9/16" wide Patient surface dimensions: 75" long x 9 1/8" wide Retractable fifth wheel provides effortless directional movement and cornering Easily store and organize fleets with all directional steering and 4 swiveling wheels PTF (Wide) 750 lb. weight capacity 31" bed width Fowler assisted lift back rest with 90 adjustability Height adjustment range: 3" 35" Overall dimensions: 83 3/8" long x 35 9/16" wide Ergonomically located oxygen tank holder Patient surface dimensions: 75" long x 31 1/8" wide Easily store and organize fleets with all directional steering and 4 swiveling wheels Ergonomically located oxygen tank holder 8" Tente total locking casters 6 brake/steer pedals pedestal lift mechanism Fowler assisted lift back rest with 90 adjustability PTF-1000 Trendelenburg/reverse Trendelenburg +/- 18 8" Tente total locking casters Lift/Trendelenburg pedals on both sides Fold forward side rails with built in push handles 9" or 31" bed width 4" comfort mattress 5 brake/steer pedals 51 13/16" ( mm) 39 3/16" (995.36mm) 750 PTF000-EYE POUND Weight Capacity Quick adjustment dual articulating head attachment Front Side Back Side Fold down push handles Manual knee gatch Manual Fowler Wrist rest Optional Wrist Rest (available in large or small) pedestal lift mechanism Trendelenburg/reverse Trendelenburg +/- 18 Lift/Trendelenburg pedals on both sides PRODUCT SPECIFICATIONS hook removable telescopic IV pole Fold forward side rails with built in push handles PTF000-EYE 6 IV pole sockets available 9" or 31" bed width 9" bed width 4" comfort mattress Overall dimensions: 89 1/" long x 33 9/16" wide hook removable telescopic IV pole Patient surface dimensions: 87 1/4" long x 9 1/8" wide 6 IV pole sockets available PTF000-EYE-31 (Wide) Large storage area underneath for patient belongings Full perimeter bumper to protect your walls and fixtures 4 restraint belt locations 83 3/8" (117.7mm) Outside Length 33 9/16" (85.49mm) Outside Width 9 1/8" (739.77mm) Patient Surface Fold down push handles Manual knee gatch 75" (1905mm) Patient Surface Large storage area underneath for patient belongings Perimeter bumper to protect your walls and fixtures 4 restraint belt locations 31" bed width Overall dimensions: 89 1/" long x 35 9/16" wide Patient surface dimensions: 75" long x 31 1/8" wide Manual Fowler 16 Transport & Eye Stretchers Call Toll Free: Transport & Eye Stretchers

11 Stretcher Features Which Stretcher is right for your facility? Stretcher Comparison Chart Retractable center fifth wheel provides straight line mobility along with effortless pivoting and cornering (PTF-1000 & PTF000-EYE) Easily store and organize fleets with all directional steering and 4 swiveling wheels (All models) brake/steer pedal locations (PT-1000 & PTF-1000) 5 brake/steer pedal locations (PTF000-EYE) IV pole sockets available (All models) 1 Standard Features Retractable fifth wheel 750 lb. weight capacity Height adjustment range: 3" 35" Ergonomically located oxygen tank holder All directional steering with 4 swiveling wheels Fowler assisted lift back rest with 90 adjustability 8" Tente total locking casters 5 brake/steer pedals 6 brake/steer pedals pedestal lift mechanism Trendelenburg/reverse Trendelenburg +/- 18 Lift/Trendelenburg pedals on both sides Fold forward side rails with built in push handles 9" or 31" bed width 4" comfort mattress hook removable telescopic IV pole 6 IV pole sockets available Large storage area underneath for patient belongings Perimeter bumper to protect your walls and fixtures 4 restraint belt locations Quick adjustment dual articulating head attachment PT-1000 PTF-1000 PTF000-EYE (Discontinued) Optional Features PT-1000 PTF-1000 PTF000-EYE Fold down push handles Manual knee gatch Manual Fowler Wrist rest Trendelenburg & reverse Trendelenburg +/- 18 (All models) Fowler assisted lift back rest with 90 adjustability (All models) For questions or to place an order, contact our customer service department at or , or by at sales@macmedical.com. Warranty All products manufactured by MAC Medical, Inc. will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer's expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from MAC Medical, Inc. must be obtained prior to items return. Large storage area for patient belongings (All models) Ergonomically located oxygen tank holder (All models) 18 Transport & Eye Stretchers Call Toll Free: Transport & Eye Stretchers

12 SS-Series Surgical Scrub Sinks The SS-Series is our premier line of surgical scrub sinks. These sinks combine the best material, components, and craftsmanship available on the market today. OSHPD Pre-Approved Stainless Steel Sinks Manufactured of the highest quality possible, we deliver a full line of fully functional Surgical Scrub Sinks & Processing Sinks. Combining the best materials, components, and craftsmanship available, each sink is customizable to each customer's specific needs., dual, or triple stations Deep sloping basin Adjustable thermostatic controlled pressure regulating mixing valve (one per station) Knee operated water & soap (optional with IR sinks) Check stop strainers for ease of maintenance High mount swivel gooseneck spout with adjustable swivel spray aerator Flow control valve Backflow preventers Infrared sinks are equipped with a 4 volt plug in transformer Splash screen dividers with double and triple station sinks Main support and Z-brackets (wall support optional) 304 stainless steel polished and ground to a #4 finish Infrared operation Infrared soap dispenser Manual bypass to add knee operated water & soap with IR operation Knee operated water with IR operation Knee operated soap with IR operation Foot operated water Foot operated soap Digital scrub timer Eye wash Thermostatic mixing valve (add on to eye wash option) Laminar flow 0/40V power supply Pedestal base In-wall chair carrier Wall shelf over sink Lighted wall shelf over sink SS3 Station SS64 Station SS96 Triple Station Utility Requirements Utility Connection On Unit Pressure Range Temperature Consumption Drain 1 1/" x 6" Tail Piece N/A N/A N/A Cold Water 1/" NPT 0-50 PSIG 70 F. Max GPM Per Station Hot Water 1/" NPT 0-50 PSIG 180 F. Max GPM Per Station (IR Units Only) 10V N/A N/A N/A 0 Stainless Steel Sinks Call Toll Free: Stainless Steel Sinks

13 ES-Series Surgical Scrub Sinks Stainless steel access panels SS-Series Features Tall swivel gooseneck spout Stainless steel soap spout Adjustable thermostatic mixing valve Splash screen divider Digital scrub timer Eye wash station Our ES-Series Surgical Scrub Sinks were developed to answer space and economical constraints where needed. These sinks have smaller outside dimensions but still maintain a deep basin to allow for proper scrubbing. The operation is the same as the SS-Series, however features do vary. OSHPD Pre-Approved, dual, or triple stations Infrared operation Deep sloping basin Adjustable thermostatic controlled pressure regulating mixing valve (one per station, mounted under sink) Manual bypass to add knee operated water & soap with IR operation Knee operated water with IR operation Knee operated water (optional with IR sinks) Knee operated soap with IR operation SS96 (shown with multiple optional features) Infrared sensor Knee operated water Knee operated soap High mount swivel gooseneck spout with adjustable swivel spray aerator Flow control valve Backflow preventers Infrared sinks are equipped with a 4 volt plug in transformer Z-brackets (see specifications on rear panel for wall support) 304 stainless steel polished and ground to a #4 finish Foot operated water Foot operated soap Digital scrub timer Eye wash Thermostatic mixing valve (add on to eye wash option) Laminar flow 0/40V power supply Pedestal base Recommended Optional Products SH0001 Optional Infrared Soap Dispenser Base Model # In-Wall Chair Carrier # Shelf Over Sink # Lighted Shelf Over Sink # SS3 S0001 SH0001 (11.5" D x 3" W) SH0001-L SS64 S000 SH000 (11.5" D x 64" W) SH000-L SS96 S0003 SH0003 (11.5" D x 3" W) SH0003-L Only available for the SS-Series Surgical Scrub Sinks ES5 Station ES47 Station ES76 Triple Station How to Order SS-Series How to Order ES-Series Infrared Operation Infrared Soap Dispenser Manual Bypass to add Knee Operated Water and Soap with IR Operation Knee Operated Water with IR Operation Knee Operated Soap with IR Operation Foot Operated Water Foot Operated Soap Digital Scrub Timer Eye Wash Thermostatic Mixing Valve (add on to Eye Wash option) Laminar Flow 0/40V Pedestal Base Infrared Operation Manual Bypass to add Knee Operated Water and Soap with IR Operation Knee Operated Water with IR Operation Knee Operated Soap with IR Operation Foot Operated Water Foot Operated Soap Digital Scrub Timer Eye Wash Thermostatic Mixing Valve (add on to Eye Wash option) Laminar Flow 0/40V Pedestal Base IR IRD MB KOW KSP FOW FSP TM EYE TV LF 0 PB IR MB KOW KSP FOW FSP TM EYE TV LF 0 PB Example 1: Base Model # SS3 with Infrared Soap Dispenser, Digital Scrub Timer, and Pedestal Base = Model # SS3-IRD-TM-PB Example : Base Model # SS96 with Foot Operated Water, Eye Wash, and Laminar Flow = Model # SS96-FOW-EYE-LF Example 1: Base Model # ES5 with Infrared Operation, Manual Bypass to add Knee Operated Water & Soap, Digital Scrub Timers, and Pedestal Base = Model # ES5-IR-MB-TM-PB Example 1: Base Model # ES47 with Laminar Flow = Model # ES47-LF Stainless Steel Sinks Call Toll Free: Stainless Steel Sinks

14 Ergonomically Friendly Processing Sinks Pipe Base Units Processing Sinks Cabinet Base Units Pipe base, dual, or triple basins Fully welded construction with reinforced tops Right to left workflow or left to right workflow 37" standard height for stationary sinks 4" backsplash Under shelf Adjustable feet Drain boards Etched gallon markings Basin size: 4"W x 17"L x 10"D Full CAD rendering of specified sink Multiple layouts for individual requirements All sinks can be manufactured to individual specs Ergonomically friendly electronic adjustable height with four position programming - Electronic adjustable height range: 35" 4" Wrap around apron Mixing valve faucet Pre-rinse faucet DI water Air gun (with 5 tips) Water gun (with 8 tips) Eye wash Shut off valve 6" backsplash 8" backsplash Side splash Tubing manifold Hand lever drains Foot operated drains (not available for adjustable height units) Copper drain system (single, dual, and triple) PS (electronic adjustable height shown with left to right workflow and optional pre-rinse faucet, DI water, air gun, and water gun) Standard Pipe Base Models (Stationary) Base Model # PS PS PS Standard Pipe Base Models (Electronic Adjustable Height) Base Model # PS PS PS R Note: ETL compliance for adjustable height models only. 6"D x 7"W x 37"H, Basin 6"D x 96"W x 37"H, Basin 6"D x 10"W x 37"H, Triple Basin 6"D x 7"W x 35"H, Basin 6"D x 96"W x 35"H, Basin 6"D x 10"W x 35"H, Triple Basin Cabinet base (door, drawer, or open shelf combination), dual, or triple basins Fully welded construction with reinforced tops Right to left workflow or left to right workflow 37" standard stationary height 4" backsplash Drain boards Under shelf and one adjustable shelf Etched gallon markings Basin size: 4"W x 17"L x 10"D Full CAD rendering of specified sink Multiple layouts for individual requirements All sinks can be manufactured to individual specs Mixing valve faucet Pre-rinse faucet DI water Air gun (with 5 tips) Water gun (with 8 tips) Eye wash Shut off valve 6" backsplash 8" backsplash Side splash Tubing manifold Hand lever drains Foot operated drains Copper drain system (single, dual, and triple) PS (shown with left to right workflow and optional pre-rinse faucet, DI water, air gun, and water gun) R Standard Cabinet Base Models Base Model # PS PS PS "D x 7.5"W x 37"H, Basin 6"D x 96.5"W x 37"H, Basin 6"D x 10.5"W x 37"H, Triple Basin Note: Electronic adjustable height not an option for cabinet base units. 4 Stainless Steel Sinks Call Toll Free: Stainless Steel Sinks

15 Wall Cabinets Wall Cabinet Stainless Steel Cabinets MAC Medical, Inc. manufactures a full line of stainless steel cabinets including Wall Cabinets, Base Cabinets, Desk Cabinets, Supply Cabinets, and Nurses Documentation Stations. All cabinets can be configured and arranged in a number of ways to create a custom bank of cabinets. In addition, all units have many optional features to choose from. Whether you need a complete renovation or a new construction, we can work with your elevation plans and facility planners to meet any specific need. As with all our products, all stainless steel cabinets are built with quality and durability in mind. Fully welded construction Glass hinged doors Stainless steel adjustable shelves Standard handles Full CAD renderings Engineered room layouts in CAD based on customer provided drawing Multiple layouts for individual requirements STANDARD SIZES Depths: 13" Widths: 4", 30", 36", 48", and 60" Flat Top Heights: 18", 4", and 30" Sloped Top Heights: 4", 30", and 36" Stainless steel doors Sliding glass doors No doors Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back Sloped top (adds 6" to height) STANDARD FLAT TOP SHELVING 1 shelf for 18" & 4" heights shelves for 30" height STANDARD SLOPED TOP SHELVING 1 shelf for 4" & 30" heights shelves for 36" height Note: Shelving adjusts in 1 1/" increments. Base Cabinets Fully welded construction Stainless steel doors Stainless steel adjustable shelf Standard handles Base Cabinet 4" backsplash Full CAD renderings Engineered room layouts in CAD based on customer provided drawing Multiple layouts for individual requirements STANDARD SIZES Depths: 4" Widths: 4", 30", 36", 48", and 60" Heights: 36" Glass hinged doors No doors Drawers Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pull out writing surface Variable height bases Note: Shelving adjusts in 1 1/" increments. 6 Stainless Steel Cabinets Call Toll Free: Stainless Steel Cabinets

16 Desk Cabinets Recessed or free standing Fully welded construction Standard handles Full CAD renderings Engineered room layouts in CAD based on customer provided drawing Multiple layouts for individual requirements Stainless steel doors Glass hinged doors No doors Drawers Sloping work surface Pull out writing surface Fluorescent light fixture Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back Pass through construction Sloped top (adds 6" to height, only available for free standing cabinets) Casters (adds 1/" to height, only available for free standing cabinets) Variable height bases (only available for free standing cabinets) Warranty STANDARD FREE STANDING SIZES Depths: 18" & 4" Widths: 4", 30", and 36" Flat Top Heights: 60", 64", 7", 78", and 84" Sloped Top Heights: 66", 70", 78", 84", and 90" STANDARD RECESSED SIZES Depths: 18" & 4" Widths: 4", 30", and 36" Flat Top Heights: 56", 60", 68", 74", and 80" All products manufactured by MAC Medical, Inc. will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer's expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from MAC Medical, Inc. must be obtained prior to items return. Recessed Desk Cabinet (shown with optional slopping working surface and drawers) Supply Cabinets Recessed or free standing Fully welded construction Glass hinged doors Stainless steel adjustable shelves Standard handles Full CAD renderings Engineered room layouts in CAD based on customer provided drawings Multiple layouts for individual requirements Stainless steel doors Sliding glass doors No doors Drawers Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back Pass through construction Sloped top (adds 6" to height, only available for free standing cabinets) Casters (adds 1/" to height, only available for free standing cabinets) Variable height bases (only available for free standing cabinets) STANDARD FREE STANDING SIZES Depths: 18" & 4" Widths: 4", 30", 36", and 48" Flat Top Heights: 60", 64", 7", 78", and 84" Sloped Top Heights: 66", 70", 78", 84", and 90" STANDARD RECESSED SIZES Depths: 18" & 4" Widths: 4", 30", 36", and 48" Flat Top Heights: 56", 60", 68", 74", and 80" STANDARD FLAT TOP SHELVING Free Standing Units 3 shelves for 60" & 64" heights 4 shelves for 7" & 78" heights 5 shelves for 84" heights Recessed Units 3 shelves for 56" & 60" heights 4 shelves for 68" & 74" heights 5 shelves for 80" heights STANDARD SLOPED TOP SHELVING Free Standing Units Only 3 shelves for 66" & 70" heights 4 shelves for 78" & 84" heights 5 shelves for 90" heights Note: Additional shelving available for purchase. Shelving adjusts in 1 1/" increments. Free Standing Supply Cabinet (shown with optional sloped top and variable height base) 8 Stainless Steel Cabinets Call Toll Free: Stainless Steel Cabinets

17 Nurses Documentation Stations Wall Cabinet Configured Cabinets MAC Medical, Inc. can help you design a complete stainless steel cabinetry build out to meet any custom requirement your facility may have. Any arrangement of wall cabinets, base cabinets, desk cabinets, supply cabinets, and even warming cabinets can easily be configured to create a continuous bank of cabinets. In addition, all cabinets come with a variety of optional features to choose from. Whether you need a complete renovation or have a new construction, let us work with your elevation plans and facility planners to meet your specific requirements. Supply Cabinets Wall Cabinet Sloped Top Recessed or free standing Fully welded construction Configuration includes wall cabinet, base cabinet, and tower cabinet (tower cabinet can be configured on either side) Stainless steel adjustable shelves Standard handles Heavy duty pull out drawers Integrated wire management system Full CAD renderings Engineered room layouts in CAD based on customer provided drawings Multiple layouts for individual requirements Stainless steel doors Glass hinged doors Vented doors for electronics No doors Overhead lighting Pull out writing surface Pull out bottom shelf for easy PC install Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back Sloped top (adds 6" to height, only available for free standing cabinets) Variable height bases (only available for free standing cabinets) Base Cabinet Standard Model Base Model # NDS "D x 78"W x 84"H Note: Additional shelving available for purchase. Shelving adjusts in 1 1/" increments. Unit Configuration NDS (shown with multiple optional features) Tower Cabinet Wall Cabinet (NDS WC) Base Cabinet (NDS64836-BC Tower Cabinet (NDS DDU) Standard Handles Glass Doors Variable Height Bases Pull Out Writing Surface * Recessed or free standing Fully welded construction Stainless steel adjustable shelves Standard handles Full CAD renderings Engineered room layouts in CAD based on customer provided drawings Multiple layouts for individual requirements Base Cabinet * Stainless steel doors Glass hinged doors Sliding glass doors Vented doors for electronics No doors Drawers Sloping work surface Pull out writing surface Overhead lighting Fluorescent light fixture For guidance on a specific custom cabinet configuration, contact our customer service department at or , or by at sales@macmedical.com. Vented Doors for Electronics Tee handles Tee handles with key lock Electronic keypad door locks Magnetic door catches Pegboard back Pass through construction Sloped top (adds 6" to height) Variable height bases Custom sizes available * Standard & optional features vary based on cabinet type Adjustable Shelving 30 Stainless Steel Cabinets Call Toll Free: Stainless Steel Cabinets

18 Instrument Tables Stainless Steel Tables MAC Medical, Inc. manufactures a full line of stainless steel tables including Instrument Tables, Utility Tables, Nested Tables, Work Tables, Space Saver Tables, Adjustable Over Operating Tables, Central Supply Tables, and Prep & Pack Workstations. Fully welded construction Reinforced tops Stainless steel legs (1 1/4" 16 gauge) Stainless steel top (16 gauge type 300 series) Stainless steel under shelf (18 gauge type 300 series) " swivel casters Base Model # T0001 T000 T0004 (shown with optional U brace & 3" locking casters) 16"W x 0"D x 34"H 16"W x 30"D x 34"H 3" swivel casters Locking casters Drawers under all sizes Guard rails on 3 sides (available on top or bottom shelf) Guard rails on all 4 sides (available on top or bottom shelf) H or U brace instead of under shelf Side extensions 1" lip on back Multiple under shelves T0003 T0004 T0005 T0006 T0049 T0053 T0054 T0058 T0059 T0088 4"W x 36"D x 34"H 4"W x 48"D x 34"H 4"W x 60"D x 34"H 4"W x 7"D x 34"H 0"W x 48"D x 34"H 8"W x 30"D x 34"H 30"W x 7"D x 34"H 0"W x 36"D x 34"H 30"W x 60"D x 34"H 18"W x 33"D x 34"H T "W x 36"D x 36"H T0115 0"W x 0"D x 34"H T Stainless Steel Tables Call Toll Free: Stainless Steel Tables

19 Utility Tables Fully welded construction 1 under shelf Top guard rail (on 3 sides) 3" casters ( swivel & locking) Multiple under shelves No guard rail Base Model # T0086 T0077 T0096 T0097 T D-GR T D-GR T D-GR 16"W x 0"D x 34"H 16"W x 0"D x 34"H 16"W x 0"D x 34"H 16"W x 0"D x 34"H 18"W x 33"D x 34"H 18"W x 33"D x 34"H 18"W x 33"D x 34"H Drawers Work Tables Fully welded construction Reinforced stainless steel top (16 gauge type 300 series) Stainless steel under shelf (18 gauge type 300 series) " square legs Added supports Adjustable feet 3" swivel casters Ergonomically friendly adjustable heights (manual or electronic) Manual adjustable height range: 36" 55" Electronic adjustable height range: 36" 43" 5" swivel casters Locking casters Base Model # WT0003 WT0004 WT0005 WT0054 WT0055 WT0059 Ergonomically Friendly WT0003 (shown with optional manual adjustable height, H brace, and 5" swivel casters) 4"W x 36"D x 36"H 4"W x 48"D x 36"H 4"W x 60"D x 36"H 30"W x 7"D x 36"H 36"W x 7"D x 36"H 30"W x 60"D x 36"H H or U brace instead of under shelf Full base unit underneath T0086 T D-GR Drawers under all sizes Stainless steel guard rails Multiple under shelves Nested Tables Model # T0089 Set of 6 (T0090 through T0095) Space Saver Tables Fold down top shelf! T0089 (set of 6) Fully welded construction Stainless steel legs (1 1/4" 16 gauge) Stainless steel tops (16 gauge type 304) Stainless steel U brace (1 1/4" 16 gauge) " swivel casters T0090 T0091 T009 T0093 T0094 T0095 4"W x 48"D x 4"H "W x 44"D x 40"H 0"W x 40"D x 38"H 18"W x 36"D x 36"H 16"W x 3"D x 34"H 14"W x 8"D x 3"H Fold down top shelf with lip (space saving feature!) One under shelf " square legs 4" casters TSPS (shown with optional manual adjustable height) Ergonomically Friendly Ergonomically friendly adjustable heights (manual or electronic) Manual adjustable height range: 36" 55" Electronic adjustable height range: 36" 54" Base Model # TSPS TSPS Note: Additional sizes available for specific requirements. Please contact us for further assistance. Note: Model # will change based on features added. 60"W x 30"D x 36"H 7"W x 30"D x 36"H 34 Stainless Steel Tables Call Toll Free: Stainless Steel Tables

20 Adjustable Over Operating Tables Prep & Pack Workstations Ergonomically friendly manual adjustable height Manual adjustable height range: 36.5" 48.5" 3" casters ( swivel & locking) 1" lip on back Ergonomically Friendly T Designed with ergonomics in mind, the Prep & Pack Workstation features a modular design, allowing for multiple configurations and adjustability for all body types. Choose from the many optional features including adjustable height (manual or electronic), overhead light, magnification light, CPU holder, electrical strip, and more. Base Model # T T T (height at lowest setting) 34"W x 4"D x 36.5"H 48"W x 4"D x 36.5"H 60"W x 4"D x 36.5"H 100% stainless steel construction Modular design allows for multiple configurations Integrated footrest Two 4" swivel casters and two 4" locking casters Ergonomically Friendly TWS-307 (shown with multiple optional features) Ergonomically friendly adjustable heights (manual or electronic) Manual adjustable height range: 6.5" 34.5" (working surface), 81" 89" (top height) Electronic adjustable height range: 6.5" 33.5" (working surface), 81" 88" (top height) Bin rail Central Supply Tables Heavy duty, stainless steel construction One under shelf 4" casters ( swivel & locking) Sterile frame 6" plastic bin 10" plastic bin Drawer Base Model # CST360 60"W x 3"D x 34"H CST47 7"W x 4"D x 34"H CST "W x 36"D x 34"H CST360 (shown with optional sterile frame) Overhead light Articulating magnification light strip CPU holder Pull out keyboard tray Magnetic dry erase board Adjustable flat shelf for riser frame Adjustable angled shelf for riser frame Lower shelf Side mount waste basket holder with waste basket Spool holder Drawer boxes 6" drawer box Double 6" drawer box Double drawer box with 6" drawer and file drawer Base Model # TWS-3060 TWS-307 TWS-3660 TWS-367 (height at lowest setting) 60"W x 3.5"D x 81"H 7"W x 3.5"D x 81"H 60"W x 38.5"D x 81"H 7"W x 38.5"D x 81"H 36 Stainless Steel Tables Call Toll Free: Stainless Steel Tables

21 Closed Case Carts Stainless Steel Carts MAC Medical, Inc. manufactures a full line of stainless steel carts that feature fully welded construction for strength and durability. Choose from standard designs or have our engineering department custom design any specific case cart to satisfy any need your facility may have. Fully welded construction 8.5" x 11" card holder Sound-proofed tops and doors for quiet operation Adjustable perforated roll out stainless steel shelves Exterior push handle for better control Full wrap around non-marring bumper Tamper evidence security tab Positive lock door latches 6" maintenance-free, high temp, high pressure stainless steel casters with sealed ball bearings (3 swivel & 1 fixed directional) MMCC7 Adjustable solid shelf (roll out) Adjustable solid shelf (non roll out) Adjustable perforated shelf (non roll out) Adjustable wire shelf (roll out) Adjustable wire shelf (non roll out) No shelves Side extensions Flag system (one each of red, yellow, and green) Clean/dirty indicator Tow hitch Composite directional locking casters Total locking casters Silicon door gasket for complete sterility control Base Model # Case Dimensions Doors Adjustable Shelves MMCC 8.5"W x 8.5"D x 47.5"H 34"W x 3.65"D x "H 1 MMCC3 40.5"W x 5"D x 30.5"H 46"W x 8.15"D x "H 1 MMCC4 40.5"W x 5"D x 47.5"H 46"W x 8.15"D x "H MMCC5 36"W x 5"D x 47.5"H 41.75"W x 9.15"D x "H MMCC6 3.65"W x 5"D x 30.5"H 9.375"W x 9.15"D x 39.65"H 1 1 MMCC7 36"W x 5"D x 44.5"H 41.75"W x 8.15"D x 53.65"H MMCC "W x 5"D x 8.5"H 8.75"W x 8.15"D x 37.65"H 1 1 MMCC9 3.65"W x 5"D x 46.5"H 9.375"W x 9.15"D x "H 1 MMCC1 36"W x 5"D x 31"H 41.75"W x 9.15"D x 40"H 1 MMCC "W x 5.85"D x 31.5"H 5.5"W x 9"D x 40.5"H Note: Additional shelving available for purchase. Shelving adjusts in 3" increments. 38 Stainless Steel Carts Call Toll Free: Stainless Steel Carts

22 Open Case Carts MMOCC16 (shown with 3 adjustable solid shelves) MMOCC19 (shown with fixed top shelf and 1 adjustable wire shelf) Open design Sturdy built cart perfect for storage, supplies, linens, or distribution Full wrap around non-marring bumper Stainless steel guard rail 6" composite directional locking casters Adjustable solid shelf (non roll out) Adjustable perforated shelf (non roll out) Adjustable wire shelf (non roll out) Wire grid on back side 6" maintenance-free, high temp, high pressure stainless steel casters with sealed ball bearings (3 swivel & 1 fixed directional) Total locking casters 6" plastic bin 10" plastic bin Base Model # MMOCC13 MMOCC16 MMOCC "W x "D x 41"H 6"W x "D x 67"H 6.5"W x "D x 36.75"H Vertical Handle Case Carts Ergonomically friendly vertical handles for precise control Fully welded construction 8.5" x 11" card holder Sound-proofed tops and doors for quiet operation Adjustable perforated roll out stainless steel shelves Full wrap around non-marring bumper Tamper evidence security tabs Positive lock door latches 6" maintenance-free, high temp, high pressure stainless steel casters with sealed ball bearings (3 swivel & 1 fixed directional) Adjustable solid shelf (roll out) Adjustable solid shelf (non roll out) Adjustable perforated shelf (non roll out) Adjustable wire shelf (roll out) Adjustable wire shelf (non roll out) No shelves Side extensions Flag system (one each of red, yellow, and green) Clean/dirty indicator Tow hitch Composite directional locking casters Total locking casters Silicon door gasket for complete sterility control Base Model # MMCV95 MMCV107 Ergonomically Friendly Case Dimensions 36.5"W x 6.5"D x 40.75"H 40"W x 4.75"D x 38.75"H 48.5"W x 7.75"D x 53"H 48.75"W x 6"D x 51"H Note: Additional shelving available for purchase. Shelving adjusts in 3" increments. MMCV95 MMOCC19 6"W x 36"D x 39"H MMOCC1 MMOCC4 MMOCC5 Note: Shelves ordered separately. 9.75"W x 9.75"D x 6"H 4"W x 30"D x 54"H 4"W x 4"D x 54"H Warranty All products manufactured by MAC Medical, Inc. will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer's expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from MAC Medical, Inc. must be obtained prior to items return. MMOCC1 (shown with 3 adjustable wire shelves) 40 Stainless Steel Carts Call Toll Free: Stainless Steel Carts

23 Solution Stands Stainless Steel Stands MAC Medical, Inc. manufactures a full line of stainless steel stands including Solution Stands, IV Stands, and Mayo Stands. Fully welded stainless steel construction and double basin designs available Available with lower shelf SOL-1000 : 14"W x 14"D x 34"H Removable 7 quart stainless steel basin Open frame design allows accessibility from any side " swivel casters SOL-1001 Same as SOL-1000 except with stainless steel lower shelf Removable 7 quart stainless steel basin SOL / quart basin SOL / quart basin SOL-1000 SOL-1001 SOL-000 SOL-001 : 14"W x 8"D x 34"H Same as SOL-000 except with stainless steel lower shelf Two removable 7 quart stainless steel basins Two removable 7 quart stainless steel basin SOL SOL SOL / quart basins SOL / quart basins 4 Stainless Steel Stands Call Toll Free: Stainless Steel Stands

24 Mayo Stands IV Stands Stainless steel construction Height adjustment range: 68" 108" IVS-3000 Series Foot operated 5-leg stand Welded base IVS-300 Two hook design Tip resistant base " swivel casters IVS-4000 Series Foot operated 4-leg stand Welded base IVS-400 Two hook design Full welded stainless steel construction Height adjustment range: 36" 58" " swivel casters 50 POUND Weight Capacity MYO-000 Mobile base MYO-000 Removable 1 1/4" x 16 1/4" stainless steel tray Foot operated friction lock height adjustment/dual post 50 lb. weight capacity MYO-001 Same as MYO-000 except 19 1/8" x 1 5/8" stainless steel tray MYO-00 Same as MYO-000 except 5" x 0" stainless steel tray IVS-3006 IVS-3004 Four hook design IVS-3006 Six hook design IVS-5000 Series Hand operated 4-leg stand Knock down version (assembly required) IVS-4004 IVS-4004 Four hook design IVS-4006 Six hook design IVS-6000 Series Hand operated 6-leg stand Knock down version (assembly required) 50 POUND Weight Capacity MYO-3000 MYO-3000 Removable 1 1/4" x 16 1/4" stainless steel tray Hand operated friction lock height adjustment/dual post 50 lb. weight capacity MYO-3001 Same as MYO-3000 except 19 1/8" x 1 5/8" stainless steel tray MYO-300 Same as MYO-3000 except 5" x 0" stainless steel tray IVS-7004 IVS-500 IVS-500 Two hook design IVS-5004 Four hook design IVS-5006 Six hook design IVS-7000 Series Hand operated 5-leg stand Knock down version (assembly required) IVS-700 Two hook design IVS-7004 Four hook design IVS-7006 Six hook design IVS-6004 Warranty IVS-600 Two hook design IVS-6004 Four hook design IVS-6006 Six hook design All products manufactured by MAC Medical, Inc. will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer's expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from MAC Medical, Inc. must be obtained prior to items return. 40 POUND Weight Capacity 40 POUND Weight Capacity MYO-4000 MYO-5000 MYO-4000 Removable 1 1/4" x 16 1/4" stainless steel tray Manual knob operated adjustment/single post 40 lb. weight capacity MYO-4001 Same as MYO-4000 except 19 1/8" x 1 5/8" stainless steel tray MYO-5000 Removable 1 1/4" x 16 1/4" stainless steel tray Foot operated friction lock height adjustment/single post 40 lb. weight capacity MYO-5001 Same as MYO-5000 except 19 1/8" x 1 5/8" stainless steel tray Optional mobile base available for all models 44 Stainless Steel Stands Call Toll Free: Stainless Steel Stands

25 Other Stainless Steel Products MAC Medical, Inc. manufactures several other stainless steel products including Linen Hampers, Kick Buckets, Step Stools, Wall Shelves, Pass Through Windows, and Peg Boards. Linen Hampers Fully welded, heavy gauge all stainless steel construction Heavy gauge stainless steel platform to support bags and ease of removal " swivel casters Foot operated stainless steel lid Rotating bumper guards over casters LH-1000 Overall dimensions: 35"H x 57 1/4"perimeter Accommodates 18" diameter bags LH-1001 Optional foot operated stainless steel lid available on all models Overall dimensions: 35"H x 78 5/8"perimeter Accommodates 5" diameter bags LH-000 Overall dimensions: 35"H x 18"diameter Accommodates 18" diameter bags LH-001 Overall dimensions: 35"H x 5"diameter Accommodates 5" diameter bags Warranty All products manufactured by MAC Medical, Inc. will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer's expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from MAC Medical, Inc. must be obtained prior to items return. 46 Other Stainless Steel Products Call Toll Free: Other Stainless Steel Products

26 Wall Shelves Kick Buckets Stainless steel construction Pre-drilled for easy wall mounting (mounting hardware not included) Stainless steel frame Model # Overall Size Perimeter bumper to protect walls Tip resistant " swivel casters KB-1000 KB-000 SH064 SH0630 SH084 6"D x 4"W 6"D x 30"W 8"D x 4"W SH064 Overall dimensions: 14"H x 13 1/"diameter Removable 1 quart stainless steel basin Overall dimensions: 8"H x 16 1/4"diameter Removable 8 1/ quart stainless steel basin SH0830 SH083 SH0836 8"D x 30"W 8"D x 3"W 8"D x 36"W SH0001 SH136 1"D x 3"W 1"D x 36"W T0800 (optional transport cart) SH160 1"D x 60"W SH083 Step Stools SH000 SH0003 1"D x 64"W 1"D x 96"W Note: Additional sizes available for specific requirements. Please contact us for further assistance. Heavy duty, stainless steel construction step stools are stackable step stools connect together to create a large platform Corrugated, black rubber top surface on each stool STS11805 SH160 Tip resistant Rubber floor tips Easy roll around transport cart with 4 swiveling casters ( locking) holds up to 5 step stools only available for STS11805 Model # STS11805 (single step) T0800 (optional transport cart) STS63015 (two steps) 1"W x 18"D x 5.5"H 0"W x 19"D x 35"H 30"W x 18"D x 15"H Warranty All products manufactured by MAC Medical, Inc. will carry a limited lifetime guarantee against product craftsmanship, one year labor and two year parts guarantee. The factory will service all units without cost to the buyer for one year from shipment. After the one year period, replacement of a defective part (labor) will be at buyer's expense. We will exchange all defective parts at no cost to the buyer for a period of two years from shipment. All defective parts must be returned within 30 days to ensure proper credit. An RMA from MAC Medical, Inc. must be obtained prior to items return. 48 Other Stainless Steel Products Call Toll Free: Other Stainless Steel Products

27 Pass Through Windows Peg Boards 3/16" tempered glass Adjustable width for wall thickness (between 4" 6") PTW000 Stainless steel construction 1/4" diameter holes on 1" center Key hole slots for mounting (mounting hardware not included) Height Decontamination side shelf (various sizes) Clean side shelf (various sizes) SSPEG487 Width Base Model # Outside Dimensions PTW "W x 34.5"L (no shelf) PTW "W x 34.5"L (shelf included) Standard Hooks PTW0003 PTW0010 4"W x 34.5"L (no shelf) 6.5"W x 74"L (window & door combination, shelf included) Model # SSPEG436 4"W x 36"H Model # IC Hook Size 3-3/3" stainless steel single peg board hook (fits 3/16" & 1/4" diameter holes) SSPEG3636 SPEG3648 SPEG448 36"W x 36"H 36"W x 48"H 4"W x 48"H IC018-0 IC IC /16" stainless steel single peg board hook (fits 3/16" & 1/4" diameter holes) 8-3/4" stainless steel single peg board hook (fits 3/16" & 1/4" diameter holes) 8" stainless steel single peg board hook (fits 1/4" diameter holes) SPEG "W x 48"H IC " stainless steel single peg board hook (fits 1/4" diameter holes) SPEG487 SPEG "W x 7"H 48"W x 96"H Note: Additional sizes available for specific requirements. Please contact us for further assistance. Note: All hooks are compatible with all peg board models, and are sold separately. ICO901 PTW Other Stainless Steel Products Call Toll Free: Other Stainless Steel Products

28 MR Conditional Mayo Stands Equipped for any magnetic resonance environment Full welded stainless steel construction Height adjustment range: 36" 58" " swivel casters Mobile base MR Conditional Products MAC Medical, Inc's line of MR Conditional Products can safely equip your MR rooms. The sturdy, low maintenance stainless steel construction allows our products to be placed in any magnetic resonance environment. MYO-3001-MRI POUND POUND Weight Weight Capacity Capacity MYO-3001-MRI Removable 19 1/8" x 1 5/8" stainless steel tray Hand operated friction lock height adjustment/dual post 50 lb. weight capacity MYO-4001-MRI MYO-4001-MRI Removable 19 1/8" x 1 5/8" stainless steel tray Manual knob operated adjustment/single post 40 lb. weight capacity MR Conditional Solution Stands Equipped for any magnetic resonance environment Fully welded stainless steel construction Stainless steel lower shelf SOL-1001-MRI : 14"W x 14"D x 34"H Removable 7 quart stainless steel basin Open frame design allows accessibility from any side " swivel casters SOL-001-MRI : 14"W x 8"D x 34"H Two removable 7 quart stainless steel basin SOL MRI 8 1/ quart basin SOL-001-MRI SOL MRI 8 1/ quart basins SOL-1001-MRI 5 MR Conditional Products Call Toll Free: MR Conditional Products

29 MR Conditional Kick Buckets Equipped for any magnetic resonance environment Stainless steel frame MR Conditional Linen Hampers Perimeter bumper to protect walls Tip resistant " swivel casters KB-1000-MRI Overall dimensions: 14"H x 13 1/"diameter Removable 1 quart stainless steel basin KB-000-MRI Overall dimensions: 8"H x 16 1/4"diameter Removable 8 1/ quart stainless steel basin Equipped for any magnetic resonance environment Fully welded, heavy gauge all stainless steel construction Heavy gauge stainless steel platform to support bags and ease of removal " swivel casters Optional foot operated stainless steel lid available on all models MR Conditional IV Stands Foot operated stainless steel lid Rotating bumper guards over casters LH-1000-MRI Overall dimensions: 35"H x 57 1/4"perimeter Accommodates 18" diameter bags LH-1001-MRI Overall dimensions: 35"H x 78 5/8"perimeter Accommodates 5" diameter bags Equipped for any magnetic resonance environment Stainless steel construction Height adjustment range: 68" 108" Knock down version (assembly required) Hand operated Tip resistant base " swivel casters IVS-500-MRI Two hook design 4 leg stand IVS-5004-MRI Four hook design 4 leg stand IVS-500-MRI IVS-700-MRI Two hook design 5 leg stand IVS-7004-MRI Four hook design 5 leg stand IVS-7004-MRI LH-000-MRI Overall dimensions: 35"H x 18"diameter Accommodates 18" diameter bags LH-001-MRI Overall dimensions: 35"H x 5"diameter Accommodates 5" diameter bags MR Conditional Step Stools Equipped for any magnetic resonance environment Heavy duty, stainless steel construction STS41616-SMRI step stools are stackable step stools connect together to create a large platform Model # STS11805-MRI (single step) 1"W x 18"D x 5.5"H Corrugated, black rubber top surface on each stool STS41616-SMRI (two steps) 4"W x 16"D x 16"H Tip resistant Rubber floor tips 54 MR Conditional Products Call Toll Free: MR Conditional Products