Köhler Banquet Trolleys

Transcription

1 Köhler Banquet rolleys HUPF Commercial catering equipment Medical technology Wire works technology

2 he good all-rounder in catering logistics - the Köhler banquet trolley from HUPF. ransport food off-site in the Köhler banquet trolley. pecial model for use in prisons. he different Köhler banquet trolleys from HUPF readily take care of all the logistics functions involved in preparing food, temporarily storing it, keeping it hot or cold, transporting and serving it. Four model series have been designed to meet the widest possible range of requirements: unpowered, heated, actively cooled and one model with a heated substructure and a passively cooled top section. he ability to position and directly fill the banquet trolley close to where hot or cold food is being prepared is a logistical advantage. Pre-prepared ingredients for other working areas can be transported within the kitchen area and be easily and hygienically stored and kept in readiness for later use. he banquet trolley can be filled with its own containers and with plates on racks as required in each case. n all models 1/1 and/or 2/1 size Gastronorm containers can also be placed on insert rails. HUPF s Köhler banquet trolleys filled in this way can be transported within the kitchen area or in-house but also elsewhere for off-site catering. Filling a BKW 1/14 L-G-57,5 + 5 PK banquet trolley with hot and cold food. 2 3

3 Make an impression on your clients - xcellent service with the Köhler banquet trolley from HUPF. Köhler banquet trolleys can also be useful in school catering. Köhler banquet trolleys are a match for any requirement. Köhler banquet trolleys from HUPF ensure that food is ready close-at-hand and that everyone can be served at their table at virtually the same time. his functionally-oriented technology allows hot and cold food service at events, banquets and a wide range of locations to be planned in detail and carried out smoothly. he trolleys excellent insulation saves energy costs and the food temperature will only fall slightly if the power supply is interrupted. Keeping preportioned hot and cold meals ready in individual or Gastronorm containers permits flexibility of service. his makes provision for individualised menus and for reliable forward planning. he sturdy construction, flawless production and timeless design mean that the banquet trolleys are not only a sound investment for the future but also make a significant and favourable impression on the client. 4 5

4 General features information for all model series turdy ll trolleys have a stainless steel housing for safe, durable use and optimum cleaning and hygiene. nergy-saving hick insulation guarantees optimum performance. With uniform temperature throughout he special construction ensures optimum air circulation. rays containing portioned food, for example, do not touch the wall surfaces of the banquet trolley at any point. ecurely sealed he frame seal ensures secure closure. rolley-specific feature information for each model series Clearly readable Clear, easily readable digital display for air circulation cooling. djustable from +2 to +8 C at an ambient temperature up to +32 C. Dependably cooled Powerful but energy-saving cooling by air circulation. Cold Up to fi ve 1/1 Gastronorm containers can continue to be cooled by a cold storage plate. nternally divided hermal separation of hot and cold areas. ctively cooled models ecure Doors can be easily and precisely locked open without the need for an extra handle. asy to clean o improve air fl ow the tray rails are spaced from the inner walls of the trolley and can easily be removed by hand for cleaning. Heated models with passively cooled upper compartment Protected Peripheral impact protection strips at the top and bottom for all-round protection of the trolley and its contents. n actively cooled models, at the bottom only. Customised Barrier rail can be fi tted to the trolley top if desired. rgonomic he vertical push rails permit easy movement of the trolley even with the doors open. ecurely lockable ecurely locking, self-latching doors. Hygienic asy-to-clean structure for quick, thorough cleaning. table uns on 2 fi xed castors and 2 steering castors with full locking capability. afe-running Wide range of castor fi ttings to satisfy all requirements and uses. Unpowered models Heated models Monitorable nternal temperature is always clearly shown in degrees Celsius and Fahrenheit. Practical he cable runs between the door surface and push rail - the handy plug holder ensuring that it never gets in the way. asy to service he heating unit can easily be removed together with the air humidifying trough. Conditioned Container with anti-spill protection for air humidifi cation using a water reservoir for ca. 5 hours of operation. djustable and powerful Continuously adjustable heating from +30 C to +95 C. Maximum temperature of +95 C can be reached in 25 minutes. 6 7

5 ll details / dimensions are approximate. We reserve the right to make technical changes. HUPF Metallwerke GmbH & Co. KG Dieselstrasse 20 D Coesfeld Postfach 1463 D Coesfeld el.: +49 (0) 25 41/805-0 Fax: +49 (0) 25 41/ info@hupfer.de

6 PCL KCH LGC CKG QUPM

7 HUPF stacking equipment......to complete a process chain in every commercial kitchen! Plate stacker -2/VK (unheated). specially suitable for holding portions of cooled food components in Cook & Chill kitchens. he cooling slots ensure rapid exchange of the initially warm stacker atmosphere for the cold air in the cold store and ensure the low temperature is uniformly distributed throughout the crockery. n additional area of use is for the portioning of cold food for distribution in Cook & erve kitchens. Plate stacker -2/V (unheated). he plastic-coated crockery guides prevent blackening of the crockery at the contact points. wo ergonomically shaped pushing handles with integrated edge buffers reliably protect against injuries to the hands and together with the two corner buffers positioned at the bottom in the direction of travel provide all-round protection for the hectic everyday routine. he pushing handles and corner buffers are manufactured from an impact-resistant plastic. robust shock-resistant transparent cover is available for each stacker tube. his cover provides an effective protection from dust and water from condensation. he cover is equipped with a 3-point closure mechanism which can be released by a short turn. n addition it is equipped with an automatic drip water outlet for rapid drying after cleaning. Cover is suitable for dishwashers and is stackable. HUPF have designed the range of stacking equipment with a wide variety of models that an appliance can be supplied which is ideally suited to all individual requirements stacking appliances are important links for building up a smooth-running process chain in every canteen and commercial kitchen. n order to meet these requirements, the user-orientated benefits play a crucial role in every new HUPF development. ur stacking equipment enables you to optimise your working processes and therefore increase the productivity of your business. specially for holding portions of cold food in the distribution of unheated dishes for salad buffets, cakes and desserts we have the model -2/V and -2/V he robust crockery guides of these appliances can be adjusted according to the model, without a tool, to plate diameters between 19 cm and 26.5 cm or between 28 cm and 32 cm respectively. n both appliances the variable tension spring system made from grade 18/10 stainless steel ensures a constant serving height, even in crockery of differing weight.

8 implifying work and procedures......by using HUPF stacking equipment you increase the motivation of your staff! Plate stackers H-2/V (heated) and H-1/V (heated), We also supply these appliances for plate diameters of 28 cm to 32 cm. ll appliances are supplied with covers. he covers reduce the heat loss through the stacking tubes and therefore ensure a reduced heat loss in the crockery. imple and user-orientated operation by means of an ergonomically formed and easy-clean knob. Connection from the front by a flexible stable spiral cable with an angled plug. Plug holder at the front in the form of a blind socket. ll HUPF brand stacking appliances are equipped with corrosion-resistant and maintenance-free plastic castors according to D which are mounted in ball bearings. 4 castors per appliance, 2 of which are lockable. Ø 125 mm. he load-bearing capacity of each castor is 100 kg. We have reduced the dimensions of the stacking appliances H-1/V and H-2/V especially for use when serving food in self-service areas of cafeterias, bistros and restaurants. Both appliances can easily be adjusted to suit common plate diameters between 19 cm and 26.5 cm. he maximum crockery temperature of 70 C warms components that will hold temperature throughout service. With the heating switched off, these models are suitable for holding portions of cold food in distribution and for the provision of unwarmed plates for salad buffets and desserts in the area of self-service counters. Details in overview Coolstapler BDC/ specially developed for the canteen catering and Cook & Chill sectors. his saves time and makes working procedures more efficient. he Coolstapler is equipped with two lockable guide castors and 2 trestle castors, Ø 125 mm. he load-bearing capacity per castor is 100 kg. imple adjustment to common plate diameters. Gradual thermostatic temperature regulation between 20 C and 110 C in statically heated appliances (maximum crockery temperature: 70 C). 4 power ranges can be set. ppliances meet the requirements regarding water spray protection PX5 according to D grade 18/10 stainless steel. 2 pushing handles with integrated side buffer and additional corner buffers protect user and appliance. Corrosion resistant plastic castors according to D which are mounted in ball bearings and are maintenancefree, with wire protection. 4 castors per appliance, of which 2 are lockable, Ø 125 mm, the load-bearing capacity per castor is 100 kg.

9 he force to be reckoned with......new-generation plate stackers heated by circulating air! Plate stacker UH-2/VC (heated by circulating air). For reduction of the heat loss, the heated stacking appliances are equipped as standard with robust transparent covers. Powerstapler UH-2/26 P (heated by circulating air). With a power of 3 kw, the stacker heated by circulating air is a real force to be reckoned with. ts area of use is primarily the heating of wax-filled base parts made from stainless steel for keeping food warm. he ingenuous air-ducting system in combination with a high-powered fan as well as specially sealed covers bring 2 x 44 wax pellets to a temperature of over 120 C in only 3.5 hours. Powerstapler UH-2/26 P. Double-walled insulated covers with special sealing on the underside. For holding portions of hot food on a food distribution belt and subsequently transporting hot food (Cook & erve). We supply the plate stackers heated by circulating air UH-2/V with a maximum crockery temperature of 80 C and the UH-2/VC with a maximum crockery temperature of 100 C. By a suitable choice of the basic conditions such as the temperature at which the food is served, the heat insulation by means of lids and the insulation of the tray transport trolley it can be ensured that the core temperature in the product does not fall below the critical limit of 65 C. HUPF stacking appliances are always perfectly tailored to the user due to their robust and high quality workmanship they meet even the strictest requirements. Details in overview asily adjustable without tools to plate diameters between 23 or 24 cm and 26.5 cm. Heated by circulating air for quicker heating and higher maximum crockery temperatures. Gradual thermostatic temperature control. 4 power ranges can be set. ppliances meet the requirements concerning water spray protection PX5 according to D Material: grade 18/10 stainless steel. 2 pushing handles with integrated side buffer and additional corner buffers protect user and appliance. Corrosion resistant plastic castors according to D , mounted in ball bearings and maintenance-free, with wire protection. 4 castors per appliance, of which 2 are lockable, Ø 125 mm, the load-bearing capacity per castor is 100 kg.

10 he universal......plate and crockery stackers for versatile use! UUH/57-28 (heated by circulating air). his appliance is outstanding and suitable for rectangular multi-part menu plates. he supply range includes a double-walled and insulated cover made from grade 18/10 stainless steel, with handle. wo ergonomically shaped pushing handles with integrated side buffers. n combination with the corner buffers in the direction of travel offer all-round protection against damage to the appliance. UH/57-28 (heated). Due to the handle set on top, this appliance is particularly suitable for use in serving counters. he standard equipment includes a polycarbonate cover. UUH/57-28 (heated by circulating air). tacking platform: 570 x 280 mm, ideal for two stacks of crockery. UH/57-28 (heated). tacking platform: 570 x 280 mm, for up to 21 stacks of crockery. he universal plate stacker UUH/57-28, suitable for rectangular multi-part menu plates and round pieces of crockery is especially tailored for holding portions of hot food on a food distribution belt and subsequently transporting the warm food (Cook & erve). he universal plate stacker UH/57-28 is designed for holding portions of warm components in serving areas. he appliance has a capacity of up to 21 stacks of crockery - depending upon the type of crockery. Due to the maximum crockery temperature of 70 C this model is also suitable for use in self-service counters. he universal crockery stackers can also be supplied in an unheated model (U/57-28) and in a heated model (UUH/57-28). Details in overview Gradual temperature control: UUH/57-28: between 20 C and 130 C, UH/57-28: between 20 C and 110 C. n illuminated /FF switch gives clear information about the operating state even from a distance. 4 power ranges can be set. ppliances meet the requirements concerning water spray protection PX5 according to D Material: grade 18/10 stainless steel. 2 pushing handles with integrated side buffer and additional corner buffers protect user and appliance. Corrosion-resistant plastic castors according to D which are mounted in ball bearings and are maintenancefree, with wire protection. 4 castors per appliance, of which 2 are lockable, Ø 125 mm, the load-bearing capacity per castor is 100 kg.

11 he HUPF basket stackers......small pieces of crockery which do not stack easily - for efficient working procedures! Basket stacker K/50-50 (unheated). ailored for stacking baskets in dimensions 500 x 500 mm or 508 x 508 mm. tacking platform: 500 x 500 x 150 mm. Can also be supplied as K/50-50K with cooling slots, for the provision of cold components on a food distribution belt. Basket stacker K/ tacking platform: 523 mm x 523 mm, designed for standard baskets: 500 mm x 500 mm or 508 mm x 508 mm. Due to the basket heights of 75 mm and 115 mm which are used, these basket stackers are suitable for small pieces of crockery which do not stack easily. Can also be supplied as K/65-53 for standard baskets 650 x 530 mm. he stacking platform K/50-50 consists of a plastic-coated refined steel basket, 500 x 500 x 150 mm which can be included in the stacking capacity. n addition 7 baskets 115 mm high or 10 baskets 75 mm high can be used. he loosely positioned stacking platform can be removed easily for cleaning. plastic cover or is available as an accessory. HUPF stacking appliances simplify your working processes and enable you to organise your crockery efficiently. he open basket stackers K/50-50 and K/65-53 as well as the closed models K/50-50 and K/65-53 are used to provide crockery on the food distribution belt in the canteen catering sector. Both appliances are particularly suitable for stacking small pieces of crockery for example cups, saucers and mugs. he universal tension spring system made from grade 18/10 stainless steel ensures, even with differing crockery weights, a uniform and ergonomic serving height. Details in overview uniform serving height, even with differing crockery weights, is guaranteed by the universal tension spring system made from grade 18/10 stainless steel. Material: grade 18/10 stainless steel. 2 pushing handles with integrated side buffer and additional corner buffers protect user and appliance. Corrosion resistant plastic castors according to D which are mounted in ball bearings and are maintenancefree, with wire protection. 4 castors per appliance, of which 2 are lockable, Ø 125 mm, the load-bearing capacity per castor is 100 kg.

12 Benefits maximised......hupf basket stackers enable you to maximise the economy of your working processes! Basket stacker KUH/50-50 (heated by circulating air). tacking platform: plastic-coated refined steel basket, 500 x 500 x 150 mm - can be included in the stacking capacity. n addition 7 baskets, 115 mm high or 10 baskets 75 mm high can be inserted. he stacking platform can be removed easily for cleaning. CLPL BDC/ his appliance enables all cold foods, for example salads and desserts, to be stored in portions immediately after preparation, so they are constantly kept at cold temperatures without any interruption of the cooling chain - in accordance with the strict HCCP regulations. he CLPL is equipped with 2 lockable castors and 2 trestle castors, Ø 125 mm. he load-bearing capacity per castor is 100 kg. he basket stackers KUH/50-50 and KUH/65-53 are heated by circulating air, enabling crockery for the portioning of warm items of food to be provided at the food distribution belt. hese appliances are equipped with a gradual thermostatic temperature regulation between 20 C and 110 C. he combination of heating element and fan ensures rapid heating and a maximum crockery temperature of about 80 C. he four power ranges are set by way of an ergonomic knob, and in addition the appliances are equipped with an illuminated /FF switch. s in all heated stacking appliances from HUPF this model is also provided with high-quality ceramic heat insulation. he power connection is on the front of the appliance via a flexible stable spiral cable with an angled plug. he advantages summarised Uniform serving height, even with differing crockery weights, due to the universal tension spring system made from grade 18/10 stainless steel. he KUH appliances are equipped as standard with a plastic cover pr ppliances meet the requirements concerning water spray protection PX5 according to D Material: grade 18/10 stainless steel. 2 pushing handles with integrated side buffer and additional corner buffers protect user and appliance. Corrosion resistant plastic castors according to D which are mounted in ball bearings and are maintenancefree, with wire protection. 4 castors per appliance, of which 2 are lockable, Ø 125 mm, the load-bearing capacity per castor is 100 kg.

13 n use everywhere......hupf tray stackers - specially developed for the most varied requirements! he carefully designed ergonomic pushing handle with integrated side buffer protects the user s hands effectively and at the same time offers protection against damage to the appliance. ray stacker / ray stacker /U-BW. he tray stackers /47-36 and /53-37 are designed with 3 open sides and are especially suitable for use in the customer areas of self-service counters and cafeterias and also for the provision of trays on food distribution belts in canteen catering. hese appliances are also used in dishwashing areas in which there is no automatic destacking of trays. ray stacker /U-BW. uitable for automatically stacking trays lengthways or cross direction from dishwashers. tacking platform universally adjustable to trays with a length of 325 mm to 540 mm and a width of 320 mm to 540 mm, e. g. G,, universal or trapezoidal trays. Capacity: depending upon the stacking height and serving height of the dishwasher 80 to 120 trays. he advantages in overview ray stacker / n combination with an automatic stacking device this appliance can be used for stacking trays from HUPF dirty crockery return belts. he stacking area is adjustable to trays with a length of 450 mm to 530 mm and a width of 330 mm to 380 mm. Capacity: Depending upon stacking height approx. 100 trays. Uniform serving or receiving height, even with differing tray sizes, due to the universal tension spring system made from grade 18/10 stainless steel. he open construction of the whole structure guarantees very easy cleaning of the appliances. Material: grade 18/10 stainless steel. 2 pushing handles with integrated side buffer and additional corner buffers protect user and appliance. Corrosion-resistant plastic castors according to D which are mounted in ball bearings and are maintenancefree, with wire protection. 4 castors per appliance, of which 2 are lockable, Ø 125 mm, the load-bearing capacity per castor is 100 kg.

14 torage, serving, distribution......ur stacking appliances enable you to carry out your daily logistical tasks economically and smoothly! ray stacker /53-37 unloading trays on a HUPF dirty crockery return belt. ray stacker G-1/ he universal tension spring system made from grade 18/10 stainless steel always ensures a uniform ergonomically favourable serving height even with trays of differing weights. With the tray stacker -2/53-37 four stacks of trays are securely mounted and transported. he capacity is in excess of 240 trays. he solid stacking platform made from grade 18/10 stainless steel is put on loosely from above and can be removed without tools for cleaning purposes. he HUPF tray stacker G-1/53-37 is particularly for use as a tray dispenser in the customer areas of cafeterias, canteens and service areas. n contrast to the open tray stackers, different tray colours are not visible with this appliance. he tray stacker -2/53-37 is open on 2 sides and because of its high capacity it is ideally tailored to use on food distribution belts in canteen catering. ll common tray sizes are suitable, e.g. 2 stacks each of trays 530 mm x 370 mm, G trays 530 mm x 325 mm, universal trays 460 mm x 344 mm, trapezoidal trays or 4 stacks of breakfast trays 325 mm x 212 mm. n appliance with versatile uses in the tough everyday operation. dvantages and benefits in brief he vertical guiding of the stacking platform by means of ball bearings ensures outstanding running characteristics, even under a heavy loading. he entire appliance design guarantees very easy cleaning - to meet the strict hygiene regulations in the kitchen sector. Material: grade 18/10 stainless steel. 2 pushing handles with integrated side buffer and additional corner buffers protect user and appliance. Corrosion-resistant plastic castors according to D which are mounted in ball bearings and are maintenancefree, with wire protection. 4 castors per appliance, of which 2 are lockable, Ø 125 mm, the load-bearing capacity per castor is 100 kg.

15 HUPF Platform stackers......carefully thought-out and ergonomic for easy operation and a high level of safety of work! Platform stacker BD/60-60 K (unheated). n addition to being used for holding portions of cooled food in dishes in Cook & Chill kitchens, this appliance is also suitable for stacking cooling lids, covering lids and special induction lids, since these parts require a relatively large amount of space due to their height and stacking height. n ancillary area of use is in Cook & erve kitchens for holding portions of cold food in dishes for the evening distribution and the breakfast business. Platform stacker BD/60-60 (unheated). part from the provision of unheated readily stackable crockery for holding portions of cold food, this appliance is also designed for use in the area of self-service counters and cafeterias for the provision of plates for salad buffets and desserts. stable high-grade plastic cover can be supplied as an accessory. t offers reliable protection against dust and water from condensation. he cover is dishwasher-safe and stackable. wo pushing handles with integrated side buffer offer reliable protection - together with the corner buffers at the bottom in the direction of travel protect the appliance all round against damage in tough everyday operation. For the provision of unheated readily stackable crockery for holding portions of cold food in meal distribution our range includes the unheated platform stacker BD/ his appliance is also suitable for stacking of lids. pecial induction lids, as these parts require a relatively large amount of space due to their stacking height. he unheated platform stacker BD/60-60 K is suitable for holding portions of cooled food dishes in Cook & Chill kitchens. he cooling slots in the body of the appliance ensure that the initially warm stacker atmosphere is rapidly exchanged with the cold air of the cold store and therefore ensures a uniform distribution of the low temperature throughout the crockery. Details in overview he vertical guiding of the stacking platform ensures outstanding running, even under heavy loading. he stacking platform is positioned loosely from above and is easily removable without tools for cleaning purposes. he base plate allows for cleaning and draining - in accordance with hygiene regulations. Material: grade 18/10 stainless steel. 2 pushing handles with integrated side buffer and additional corner buffers protect user and appliance. Corrosion-resistant plastic castors according to D which are mounted in ball bearings and are maintenancefree, with wire protection. 4 castors per appliance, of which 2 are lockable, Ø 125 mm, the load-bearing capacity per castor is 100 kg.

16 rganisation and saving space......with new-generation stacking appliances - from HUPF! Platform stacker BDUH/60-60/4- (heated by circulating air). djustable crockery column guide by rods, 4 of which are supplied as standard. t can be easily adapted to suit all current crockery sizes between for example Ø 170 mm and Ø 280 mm by special base grid with 7 x 7 = 49 locations. Platform stacker BDUH/60-60/4- (heated by circulating air). quipped as standard with a shock-resistant cover - as protection against dust and water from condensation and to ensure a lower temperature loss in the crockery. Platform stacker BDK/57-57 (unheated). tacking platform: plastic-coated refined steel basket, positioned loosely from above and easy to remove for cleaning purposes. Cover can be supplied from the range of accessories. he platform stacker BDUH/60-60/4- which is heated by circulating air is provided especially for holding portions of hot food on a food distribution belt and subsequently transporting this warm food. t is operated by means of an ergonomic knob, the gradual thermostatic control between 20 C and 110 C can be adjusted in 4 power ranges. maximum crockery temperature of 80 C is achieved very quickly by the high-powered heating by circulating air. he platform stackers BDK/57-57 and BDK/85-60 are specially for the provision of plastic parts for keeping food warm on food distribution belts in canteen catering. hese appliances are ideally suited for use with lids, upper and lower parts. dvantages and benefits in overview he vertical guiding of the stacking platform ensures excellent running, even under a very heavy loading. Consistent serving height even with differing crockery weights. Material: grade 18/10 stainless steel. 2 pushing handles with integrated side buffer and additional corner buffers protect user and appliance. Corrosion-resistant plastic castors according to D which are mounted in ball bearings and are maintenancefree, with wire protection. 4 castors per appliance, of which 2 are lockable, Ø 125 mm, the load-bearing capacity per castor is 100 kg. ppliances meet the requirements concerning water spray protection PX5 according to D

17 he stacking appliances are designed to meet your needs and the corresponding requirements form the basis for an unbroken process chain in your operations. s specialists in kitchen logistics we develop and produce innovative appliances and systems, especially tailored to the important logistical functions such as storage, transportation, preparation, organisation, distribution, keeping food warm, regeneration and serving. We are the specialists in kitchen logistics. With us you have your process chain under control! nly the complete process chain......is a long-term guarantee of economical and efficient working procedures! P P G G G K P G F D W M V G P U B D HUPF Metallwerke GmbH & Co. KG Dieselstrasse 20 D Coesfeld Postfach 1463 D Coesfeld el.: +49 (0) 25 41/805-0 Fax: +49 (0) 25 41/ info@hupfer.de M U B D G W D F G P K P G V C P P BHG 02/04

18 PCL KCH LGC PL P LLY

19 tackable crockery......transported smoothly and neatly! W 2/26 D HCH Quality construction produced from wire, can be loaded from both sides. rgonomic removal height from 400 mm. Capacity: about 300 pieces of crockery, based on round plates, Ø 260 mm. quipped with separating grilles available as accessories. Can also be supplied as a low version. W 1/26 BL HCH High solid-walled construction, can be loaded from one side. rgonomic removal height from 400 mm. Capacity: about 150 pieces of crockery, based on round plates, Ø 260 mm. he low plate transport trolleys can be easily pushed under a worktop or serving counter. W 1/6-26 BL Low solid-walled construction, can be doubly loaded from one side. Capacity: about 300 pieces of crockery, based on round plates, Ø 260 mm. quipped with separating grilles available as accessories W 1/26 BL HCH quipped with a front grille made from electrolytically polished stainless steel, available as accessory. egardless of whether you have to transport large numbers of plates of different diameters, stackable soup or dessert dishes or wish to store them temporarily - the HUPF range of plate transport trolleys offers you the optimum basis for efficiently carrying out this logistical task. n the design of the new range of models of plate transport trolleys our development engineers have incorporated the latest ergonomic and functional aspects. We have placed particular value on the options available, thus opening up a wide range of possible uses in your kitchen operation. ur range includes models which can be loaded on one side or both sides with a high or low removal level. he low versions are also suitable for example for placing under a serving counter, the high versions with the ergonomically provided lowest removal height 400 mm are specially designed for use with a conveyor belt, e.g. for use in the Cook-Chill sector. he self-supporting frame structure (round tube Ø 25 mm) is made from grade 18/10 stainless steel. Dividers are available for all trolleys in stainless steel or plastic coated. he finish of the HUPF range of plate transport trolleys is a very high standard - entirely in keeping with the ease of cleaning and the high hygiene standards required in the kitchen sector.

20 Mobile and visible storage......always to hand where it is to be used! For rapid removal of complete stacks of crockery plate cassettes made from plastic-coated steel wire are available in our range. Castors: equipped with 4 castors in corrosion-protected housings, of which 2 are lockable, Ø 125 mm, 4 deflector rollers made from resilient impact-resistant plastic protect against damage. For all HUPF plate transport trolleys easy-clean separating grilles are available. hey can be easily installed without a tool and provide adjustable division of the plate transport trolley. comprehensive range of accessories complement the range of models and ensure ease of operation and efficiency. eparating grilles which can be easily inserted and moved provide you options for the division of the stackable crockery. For quick removal of complete stacks of crockery, cassettes for different plate diameters are available. he inclination of the inserts ensures the crockery is held securely during transport. lso, with the solid-walled versions you can use front grilles. n our range of accessories also included are polyester covers to ensure crockery does not become dusty during storage. dvantages and benefits in overview High-quality machining - with a view to ease of cleaning and high hygiene standards. mooth transport and visible storage. Large variety of types for different requirements. Models with high and low removal height. Variable division using movable separating grilles. Plate cassettes make possible quick removal of complete stacks of crockery. ecurity due to inclination of the inserts and front grille. Dust-free storage due to polyester covers. ptimum manoeuvrability due to 4 easy-running castors, Ø 125 mm, of which 2 are lockable. 4 deflector rollers protect against damage.

21 HUPF Metallwerke GmbH & Co. KG Dieselstrasse 20 D Coesfeld Postfach 1463 D Coesfeld el.: +49 (0) 25 41/805-0 Fax: +49 (0) 25 41/ t is not the individual components but the uniterrupted system which guarantees you a complete process chain. part from the HUPF plate transport trolleys in the most varied designs we offer you an extensive and perfected product range specially tailored to the individual logistical functions such as for example storage, transportation, preparation, organisation, distribution, keeping food warm, regeneration and serving. We are the specialists in kitchen logistics. With us you have your process chain under control! he process chain......guarantees success! M U B D G W D F G P K P G V C P P G V G P K P G F D W M P P G U B D G BHG 10/03