analytical laboratory clear amber bottles clear bottles

Transcription

1 94 analytical laboratory Manufactured from borosilicate 3.3 which is Autoclavable at 121 C and 1.1 bar for 30 minutes. The angled finishing allows the liquid to flow without any restrictions. Cap has a GL 45 thread and pouring ring which prevents drop splash. Amber prevent from UV lights to penetrate Inscriptions are in white enamel which is specially designed for ml 6 pieces polyethylene Manufactured from high density polyethylene which can autoclavable and resist high pressures before rupture. The angled finishing allows the liquid to flow without any restrictions. Cap has a GL 45 thread and pouring ring which prevents drop splash. Amber are manufactured from a special resin which prevent from UV lights to penetrate Inscriptions and graduations are in embossed form pieces

2 analytical laboratory 95 with side arm Manufactured from borosilicate 3.3 which is They are ideal products to be used with burettes and dispensers since the side arm allows to fill the bottle without removing the burette or the cap. These have GL45 thread screw cap and a P.P pouring ring. Amber prevent from UV lights to penetrate Inscriptions are in white enamel which is specially designed for polyethylene with side arm Manufactured from high density polyethylene which can resist high pressures before rupture. They are ideal products to be used with burettes and dispensers since the side arm allows to fill the bottle without removing the burette or the cap. These have GL45 thread screw cap and a P.P pouring ring

3 96 analytical laboratory wide neck polyethylene - square Manufactured from high density polyethylene which can resist high pressures before rupture. These space saving are ideal for long term storage of different products. Approximate graduations allow filling without the usage of cylinders. Amber are manufactured from a special resin which prevent from UV lights to penetrate Inscriptions and graduations are in embossed form. The space betwen cap and insert plug can be used for private and confidential notes. SECURITY SEAL ml 6 pieces Security seal is used ensure the safety locking and durability of the product inside the. 4 different colors are used to identify among the seals which have unique identification numbers printed on the seal plate B R Y G1 SECURITY SEAL CUTTER Perfect tool to cut security seal wires. Cat. No: Insert the stainless steel seal wire through the holes of both the cap and bottle itself. Then insert the wire into the hole of the seal as shown above. Last step is to wind the seal key clockwise until the seal wire gets tight enough to provide optimum security lock. Catalogue No:

4 analytical laboratory 97 wide neck Manufactured from neutral with round neck according to DIN 168. Non autoclavable. Supplied without cap (caps should be purchased seperately). Amber prevent from UV lights to penetrate ml bottle diameter 44 mm 50 mm 70 mm 85 mm 104 mm bottle height 75 mm 93 mm 113 mm 154 mm 181 mm neck GL size GL 40 GL 55 GL 55 GL 68 screw caps for wide neck Manufactured from polypropylene with LDPE seal which is suitable for wide neck. screw caps neck GL size GL 40 GL 55 GL 68 aluminium Manufactured from highest grade pure aluminium and they are suitable for storage, transport of subtances and referance samples that must be completely contamination free. Supplied with original seal screw which is made from P.P with internal aluminium seal and tear-off ring. aluminium ml 120 ml 300 ml 600 ml 1200 ml neck GL size

5 98 analytical laboratory dropping & NS neck Manufactured from borosilicate 3.3 which is Supplied with interchangable ground joint transparent pipette and a rubber teat. Amber prevent from UV lights to penetrate ml dropping Manufactured from borosilicate 3.3 which is Amber prevent from UV lights to penetrate dropping polyethylene Manufactured from low density polyethylene. They have a thin dropper tip which allows regular drops every time. Amber prevent from UV lights to penetrate

6 analytical laboratory 99 wash Manufactured from low density polyethylene. They are semi-rigid, translucent, have excellent clarity and easy to use by pressing gently. The stream of the liquid can be easily controlled by hand pressure. Dispensing tip provides extra fine stream. The tip can be folded back in order to increase the flow rate when necessary. wash bottle medium neck wash with imprint Manufactured from LDPE with safety imprint on wash bottle body in accordance with regulation (EC) No. 1272/2008 (GHS). Dispensing tube is used to optimize the backflow of the medium. The lack of a spray insert and the even molding of the inner diameter allow turbulence free operations. Permanent imprints on the body indicates the statutory information in accordance with GHS and also all important information. The name of the chemical solution inside the bottle is printed in German, English, French and Spanish. Other informations such as chemical formula, CAS number, hazard pictogram, signal word, hazard statements, other phrases and NFPA code is also printed. wash bottle wash bottle name acetone distilled water ethanol ethyl acetate isopropanol methanol methylethylketone tetrahydrofuran toluene