Superior Temperature Control. world of innovation

Transcription

1 TEMPRO Mold temperature Controllers Superior Temperature Control world of innovation

2 TEMPRO plus D Touch-Screen Series for Perfect Quality Latest design technology and operation In pressurized operation, a gauge ensures that the internal pressure is always bar min. over the steam pressure curve. Because of the smaller heat exchanger there is less circulating water. As a result, the preheating time and the cool down period have been reduced. Booster pump (for filling under pressure at temperatures of more than C) Touch-screen display,.7", Windows CE Heat exchanger made of stainless steel (Incoloy heating element) Pump and system pressure gauges Maintenance free magnetically coupled pump (standard in the TEMPRO plus D//8) Heating control via solid state relay Optimum visibility and operation of the TEMPRO plus D Touch-screen The actual value and set point are displayed simultaneously. Visual temperature control The mold symbol color indicates if the temperature is in the tolerance band (green: within tolerance; red: too hot; blue: too cold). Additional information on the display The operator can choose an additional value to be displayed on the screen (pressure, flow). Easy operation with the TEMPRO plus D Menus to adjust values and to choose operating modes can be selected with color touch-screen. Quick selection Operating modes that are used frequently can be selected using the touch fields at the bottom of the screen. Standard equipment for the TEMPRO plus D series Microprocessor controller with ±. C accuracy. Automatic filling and constant pressure monitoring. Pressure gauges (system and pump pressures). Automatic pump rotation detection. Maximum temperature monitoring. Heater control with solid state relay. Pumps safe to run dry. Backflow sensor. Sensor break monitoring. External sensor socket for PT sensors. Air purging (unlimited mold purge for //8 units). Timer (time switch). Potential-free dry contact for alarm output plus audible alarm. Operating hours counter/service interval indicator.»» Options Flow control and measurement. Communications interfaces. Mold sensor FeCo (Type J) socket.

3 TEMPRO plus D9///8 Circulating water single and dual zone units TEMPRO plus D9 For temperatures up to 9 C. Open system with powerful, submersible pumps without pump seals. TEMPRO plus D//8 Pressurized system with powerful pumps and with magnetically coupled pumps for graduated temperature ranges. TEMPRO plus D 9 8 Microprocessor controller, self-optimizing Maximum temperature monitoring Sensor break monitoring Automatic filling with leakage and pressure monitoring Automatic pump rotation direction detection Dry contact for alarm output plus audible alarm Connectors for external sensors PT Connector for external mold sensor FeCo Type J Leakstop function Mold purging through pump rotation change (max. l) Mold purging through pump rotation change (unlimited) Enhanced pump [ = magnetically coupled] Pressure measuring (system, pump, and flow pressure) Flow measuring [ = vortex, = ultrasonic] Boost pump [ = two pumps] Serial interface (RS, RS 8, ma, CAN, SPI) Operating hour counter/clock timer/service monitoring Variotherm tempering (on request) Pump characteristics TEMPRO plus D9 TEMPRO plus D9 standard TEMPRO plus D9 enhanced Standard equipment Q [l/min] TEMPRO plus D 9 /8 Heating capacity 9 kw (option: kw) Pump capacity ( Hz) standard Pump capacity ( Hz) enhanced. kw, max..8 bar max. l/min kw, max..8 bar max. l/min magnetically coupled. kw, max.. bar max. l/min magnetically coupled kw, max. bar max. l/min Cooling water conn. G /" + G /8" G /8" Mold connection G /" standard x 8 V/ Hz magnetically coupled. kw, max. bar max. l/min magnetically coupled kw, max. bar max. l/min 7 Pump characteristics TEMPRO plus D//8 Q [l/min] TEMPRO plus D standard TEMPRO plus D enhanced TEMPRO plus D/8 standard TEMPRO plus D enhanced TEMPRO plus D8 enhanced 8 Cooling capacity diagram TEMPRO plus D t = Temperature difference cooling water and process water [ C] TEMPRO plus D9 Cooling coil enhanced (fin-surface) Cooling coil standard (smooth finish) TEMPRO plus D//8 Cooling coil enhanced (fin-surface) Cooling coil standard (smooth finish)

4 TEMPRO plus D oil device With thermo-oil Perfect quality up to C. Precision control Microprocessor controlled until ±. C accuracy. User-friendly touch-screen display Line evacuating for mold purge Double level control Refill warning, automatic switch-off. Process pressure gauges standard Magnetically coupled pump without seal TEMPRO plus D Oil Device Microprocessor controller, self-optimizing (±. C) Maximum temperature monitoring Automatic heater control (max. heating power kw) Process pressure gauges standard Level control max./min. (message for refilling/safety switch off) Safety temperature limiter Automatic pump rotation direction detection 7 Pump characteristics TEMPRO plus D Serial interface (RS, RS 8, ma) Socket for external sensor PT Socket for external mold sensor FeCo Type J Magnetically coupled pump without seal Automatic venting of system pressure Line evacuating for mold changing Q [l/min] Sensor break monitoring Back flow sensor Dry contact for alarm output plus audible alarm Operating hour counter, indication of several intervals Standard equipment TEMPRO plus D Oil Device Heating capacity max. kw Pump capacity ( Hz) kw, max. bar, max. l/min Cooling water connection G /" Mold connection G /" standard x 8 V/ Hz. 9 Cooling capacity diagram [ C] t = Temperature difference cooling water and process water TEMPRO plus D , Ø 7 7

5 TEMPRO plus XL 9 Water units WITTMANN s TEMPRO plus XL 9 can heat up even big molds within a short time to the required set point. Besides the strong heater ( kw) we have reinforced flow (up to l/min) and cooling capacity. Purge out of molds is supported by an additional pump which pumps the water to the return line or drain. Thus the purge volume is increased. TEMPRO plus XL 9 Microprocessor controller, self-optimizing Maximum temperature monitoring Sensor break monitoring Automatic filling with leakage monitoring and level control Dry contact for alarm output plus audible alarm Connector for external sensors PT Connector for external mold sensor FeCo Type J Leakstop function Air purging for mold changes Pressure gauge/flow indication Serial interface (RS, RS 8, ma) Operating hour counter/service monitoring TEMPRO plus XL 9 Heating capacity 8 kw (option: kw) Pump standard T-/ Hz. kw, max. bar, max. l/min Pump enhanced T-/ Hz.8 kw, max. bar, max. l/min Cooling water connection G /" Mold connection G /" standard x 8 V/ Hz 8 8 Pump characteristics TEMPRO plus XL9 8 TEMPRO plus XL9 standard TEMPRO plus XL9 enhanced Standard equipment Cooling capacity diagram 8 Q [l/min] t = Temperature difference cooling water and process water TEMPRO PLUS XL [ C]

6 TEMPRO primus C9/basic C9/basic C The economic solution The ideal temperature controller for any application requiring exact temperature control and high user-friendliness, however without additional functions such as direct cooling. TEMPRO primus C9 Single zone temperature controller up to 9 C. Standard features include air purging for mold changes. TEMPRO basic C9 One circuit temperature controller for temperatures up to 9 C equipped with a self-optimizing microprocessor controller (± C). Standard with leakstop function and hand selector switch for evacuating function. TEMPRO basic C Single zone unit with pressurized system for temperatures up to C. The economic temperature controller for precise temperature control up to C. TEMPRO primus C9 basic C9 basic C Microprocessor controller, self-optimizing Maximum temperature monitoring Sensor break monitoring Automator filling with leakage monitoring and level cont. Dry contact for alarm output Connectors for external sensors PT Leakstop function / Mold purging through pump rotation change / Reinforced pump Manual filling Pressure gauge/flow indication Serial interface (RS, RS 8, ma) Analog interface ( ma / V) Operating hour counter/service monitoring Horn TEMPRO primus C9 basic C9 basic C Heating capacity 9 kw Pump capacity ( Hz) Standard Pump capacity ( Hz) enhanced. kw, max.. bar, max. l/min.7 kw, max.. bar max. l/min. kw, max. bar max. l/min.7 kw, max. bar max. l/min Cooling water connect. G /" G /8" To mold from mold G /" / G /" G /" standard x 8 V/ Hz Pump characteristics TEMPRO primus/basic C9/C TEMPRO primus/basic C9 standard TEMPRO basic C9 enhanced TEMPRO basic C standard TEMPRO basic C enhanced Standard equipment Cooling capacity diagram t = Temperature difference cooling water and process water TEMPRO basic C9 TEMPRO basic C Q [l/min] basic C basic C [ C] 7

7 TEMPRO primus C/basic C The TEMPRO primus C is used for temperatures up to C. Due to direct injection of the cooling water, it is providing an exceptionally high cooling capacity. The TEMPRO basic C was designed for the special requirements of specific applications. It is equipped with radial pumps for high flow volumes at different pressure ranges: an economic mold temperature controller series with high user-friendliness and an extensive equipment range for every application. basic C TEMPRO primus C M L Microprocessor controller, self-optimizing Maximum temperature monitoring Sensor break monitoring Automator filling with pressure monitoring Dry contact for alarm output + audible alarm Connector for external sensor PT Mold purging through pressurized air Enhanced pump Pump made of bronze Pressure gauges in pump advance and return flow Serial interface (RS, RS 8, ma) Analog interface ( ma / V) Operating hour counter/service monitoring Horn Bypass including release valve for pump advance Options: cooling valves G/", G/" G" Pressure [bar] TEMPRO primus C TEMPRO basic C Pump characteristics according Hz TEMPRO primus C basic C-M basic C-L Heating capacity 9kW 9 kw (opt. 8 kw) 8 kw (opt. / kw) Pump capacity standard Pump capacity enhanced (max. bar/ max. l/min). kw max.. bar max. l/min. kw max.. bar max. l/min. kw,. bar l/min. kw,. bar l/min. kw. bar l/ min. kw.9 bar 8 l/ min Dimensions (w/h/d) 7 x x x 8 x 7 Cooling water connect. G / Mold connection G / Standard cooling valve G /8 standard x 8 V/ Hz Standard equipment Cooling water flow rate [l/min] Flow [l/min] Flow [l/min]. kw. kw. kw. kw Cooling valve flow capacities.... Difference pressure [bar] /8" /" Cooling capacity Temperature difference: C Temperature difference: C Temperature difference: C Temperature difference: C Temperature difference: C /" " 7

8 WITTMANN Kunststoffgeräte GmbH Lichtblaustrasse Vienna Austria Tel.: + 9- info.at@wittmann-group.com TEMPRO Temperature Controllers Article number: BP (English) 7/9 Subject to change. Printed in Austria.