The world has changed. Pretty is no longer enough. Standard is no longer enough. The world wants more. I want more.

Size: px

Start display at page:

Download "The world has changed. Pretty is no longer enough. Standard is no longer enough. The world wants more. I want more."

Rhoda Martin
6 years ago
Views:

1 Commercial Products

2 The world has changed. Pretty is no longer enough. Standard is no longer enough. The world wants more. I want more.

PERFORMANCE WITH PURPOSE. D E S I G N W I T H A C O N S C I E N C E. I N N O VAT I O N W I T H A H E A RT. Q UA L I T Y YO U C A N F E E L. Today, most bath products do their job pretty well.

4 PERFORMANCE WITH PURPOSE. D E S I G N W I T H A C O N S C I E N C E. I N N O VAT I O N W I T H A H E A RT. Q UA L I T Y YO U C A N F E E L. Today, most bath products do their job pretty well. But just showing up for work isn t enough anymore. You want fixtures that save money and water without sacrificing an ounce of performance. And the peace of mind that comes from knowing you bought a brand that sets the standards for world-class performance, enduring quality and reliability. And, of course, you want fixtures that can do it all with effortless beauty. That s what TOTO is really all about connecting you with water in ways that enrich the flow of your everyday life. It s our passion. It s our mission. And it s pure TOTO.

ENDURING QUALITY All TOTO products pass multiple performance tests to ensure quality, reliability and customer

But what really matters is knowing that you ll feel just as good about your decision to buy TOTO next year,

WORLD-CLASS PERFORMANCE With more firsts than anyone else, TOTO leads the world in innovating products that

That means peace of mind, knowing that your TOTO fixtures will perform at the highest level, day in and day

ENLIGHTENED DESIGN TOTO showers, toilets and faucets can save 20-63% on water usage bills.

5 ENDURING QUALITY All TOTO products pass multiple performance tests to ensure quality, reliability and customer satisfaction. But what really matters is knowing that you ll feel just as good about your decision to buy TOTO next year, and the years after, as you do today. WORLD-CLASS PERFORMANCE With more firsts than anyone else, TOTO leads the world in innovating products that simply PERFORMANCE perform better. That means peace of mind, knowing that your TOTO fixtures will perform at the highest level, day in and day out, year after year, and look beautiful doing it. ENLIGHTENED DESIGN TOTO showers, toilets and faucets can save 20-63% on water usage bills. You use less water and save money without losing an ounce of performance. And TOTO is the only plumbing manufacturer to receive the EPA s Water Efficiency Leader Award. R E A L H U M A N V A L U E The day you install TOTO is the day you VALUE start saving with TOTO. Because with every use, you save money and water, while gaining ng something of real human value the confidence that comes with buying the right product for all the right reasons.

7 The Single Source For All Your Restroom Products The TOTO commercial line of toilets, urinals, sinks, EcoPower faucets and flush valves and hand dryers provide you with a single source to spec a full line of products. And single source specification means single source responsibility. TOILETS URINALS FLUSH VALVES HAND DRYERS SINKS SENSOR FAUCETS In today s fast paced world, the need for superior performance and reliability means everything. And when it comes to busy commercial buildings, TOTO products are the only choice. We design world-class, eco-friendly plumbing products that help you save water and money without sacrificing an ounce of performance. How do we do it? Our plumbing fixtures and fittings are made with superior parts and go through rigorous testing to ensure unmatched performance, true water-savings and complete customer satisfaction. Faucets and flush valves that are powered by the sheer force of moving water eliminate the need for routine battery replacement and constant maintenance. High Efficiency Toilets and Urinals (HETs and HEUs) that work seamlessly together with TOTO flush valves to provide considerable water and energy savings. A fixture that performs better, lasts longer and requires less time, money and effort. That s the TOTO goal to deliver real-world performance, reliability and complete peace of mind.

8 Flushing Technology TOTO s rigorous flushing performance testing methods go beyond compliance and beyond industry standards, ensuring outstanding one-flush performance and true water savings. TOTO practically invented high-efficiency flushing systems, and we have always stressed how important it is to offer a balanced system. Many competitors simply change a fill valve or trapway size to reduce water flow, leaving you the option to flush again--or deal with the dirty consequences. At TOTO, the toilet design, flushing mechanisms, water motion, glazing method and even the way that water moves are all taken into account. Our engineers optimize each flushing system to find the best balance of all components for better performance, improved reliability and ultimately, your complete satisfaction with one of the most important products in the home. Reduced Maintenance Improved Reliability Superior Performance EFVs use the flow of the water to power the entire system... and when paired with a TOTO high-efficiency commercial toilet or urinal... equals a balanced system that cannot be matched by combining different toilets and flush valves. Eco-friendly, superior performing flushing is easy to achieve with TOTO s 1.28 GPF high-efficiency commercial toilets and urinals. When combined with flushometer valves, our HEUs use an average of 0.5 GPF and the commercial HETs can use as little as 1.28 GPF. Enjoy tremendous water savings without the maintenance and sanitary drawbacks that can be associated with waterless urinals.

9 SanaGloss Developed with one simple purpose: to stay cleaner longer. Penetrating glaze not surface coating and ionic chemistry team to preserve and protect. For A low-maintenance lifetime. Exclusive, advanced ceramic glaze maintains suberb cleanliness Offers a high-gloss appearance Helps prevent staining, scaling, rust, and lime buildup Seals the fixture, creating a super smooth surface to which particles will not easily cling Forms a catalyzed ionic barrier that actually repels particles Reduces the growth of bacteria and mold Without SanaGloss With SanaGloss Ceramic is porous. Microscopically, it s full of tiny imperfections. Bacteria and particles can settle on the surface of ceramic, which can lead to stains and unsanitary conditions. SanaGloss super smooth surface barrier is actually baked into our ceramic glaze not simply applied to the surface, like some less permanent competitive products making it an integrated, inseparable part of our toilets and lavatories. Simply, it seals the surface, forming a catalyzed, positive ionic barrier that actually repels particles. Meaning stains don t stick around, and your bathrooms stay positively brilliant.

EcoPower Technology Engineered to require no electricity or routine battery replacement, EcoPower technology is the perfect marriage of hands-free operation, low maintenance, easy installation and

10 EcoPower Technology Engineered to require no electricity or routine battery replacement, EcoPower technology is the perfect marriage of hands-free operation, low maintenance, easy installation and ecology. Found only in TOTO sensor faucets and flush valves, EcoPower products are powered by water, a truly sustainable form of energy. No changing batteries that end up in landfills and no downtime required to install power supplies and wiring. Automatic water shut-off functionality in the faucets and the self cleaning 360 debris screen in the flush valves reduce maintenance costs for common problems such as continuous running, flooding and water waste. EcoPower technology saves energy and provides maximum performance in even the most demanding, high-traffic commercial spaces, making TOTO EcoPower faucets and flush valves a perfect conservation solution or LEED option. EcoPower Faucet Sensor eye in spout ensures consistent performance Micro turbine that creates self generating power Electronic circuit with capacitors, power storage units Solenoid with self-cleaning diaphragm Back-up battery Stainless steel debris screen at the supply bracket

11 The EcoPower self-generating hydropower system actually gets stronger with each use, adding years to its lifecycle. EcoPower Flush Valve Sensor eye Back-up battery Solenoid with selfcleaning diaphragm Electronic circuit with capacitors, power storage units Bronze casting Mechanical manual override button Piston with accessible 360 debris screen Micro-Turbine that creates self generating power

Sensor-operated TOTO soap dispensor Designed to complement EcoPower sensor Faucets Automatic dispensing system Remote installation of soap

available Single soap reservoir Feeds three spouts 80 SOAP COST IN $ 70 60 With it s pre-measured soap 50 release, the TOTO soap dispensor

12 Sensor-operated TOTO soap dispensor Designed to complement EcoPower sensor Faucets Automatic dispensing system Remote installation of soap reservoir and control box Self-adjusting smart sensor Economical pre-measured foaming soap ADA compliant Optional five-gallon reservoir available Single soap reservoir Feeds three spouts 80 SOAP COST IN $ With it s pre-measured soap 50 release, the TOTO soap dispensor cost less to operate than other soap systems. 40 Major Competitors Electronic Dispenser Soap Common Antibacterial Manual Pump Soap TOTO SOAP

This performance reduces energy use by 25% over traditional electronic hand dryers that sometimes fail to dry hands completely.

13 Clean Dry Hand Dryers TOTO s Clean Dry hand dryers are ADA-compliant and offer high-speed air for an effective, economical solution. Infrared sensor-operated, Clean Dry offers innovative air wicking technology that completely dries the user s hands in under 12 seconds. This performance reduces energy use by 25% over traditional electronic hand dryers that sometimes fail to dry hands completely. Further, Clean Dry dryers are extremely quiet during operation with a low decibel rating between db. Clean Dry also features washable filters that may be reused and help keep the room s air fresh. Drain trays collect the water dripping from hands to prevent watermarks or slick spots on the floor, and the products also have special hardware to prevent vandals from removing or damaging the units. ADA-compliant, high-speed hand dryer Hands-free, sensor-operated and hygienic Innovative, air wicking technology effectively dries in 5-7 seconds Uses 1/4 less energy than traditional electronic hand dryers

14 LEED Applicable Products LEED is an internationally recognized green building certification system that provides third-party verification for a building or communities. To get maximum LEED points, a new or existing building must reach specified water-usage reduction percentages to earn LEED points. The more usage reductions, the more LEED points are earned.* TOTO offers a full range of bathroom products that can help professionals in the commercial industry earn LEED points toward certification: 1.28 HET 20% Reduction 0.5 HEV with Urinal 50% Reduction 1.5 HEF 32% Reduction 0.08 GPC EcoPower Faucet 68% Reduction * Refer to LEED certification system maintained by the United State Green Building Council (USGBC) TOTO Demonstrates Leadership and Vision TOTO plays a significant role in leading the sustainability charge in our industry. In fact, our active role in leading policy and certification organizations demonstrates how we go beyond products or practices to help ensure environmental responsibility across all company activities. TOTO USA is the only plumbing manufacturer to receive the EPA s Water Efficiency Leader Award TOTO was the first plumbing products manufacturer to have employees become sustainability experts by gaining LEED Accredited Professional status TOTO was the first major plumbing products manufacturer to join the United States Green Building Council (USGBC) EPA WaterSense Partner Green Building Initiative Water Efficiency Leader Award Environmental Protection Agency LEED AP Argon Award

15 SPECIFICATION SHEETS Churchill Downs Louisville, Kentucky Bridgepoint Health Toronto, Ontario Metropolitan Museum of Art New York, New York Google Headquarters Mountainview, California

17 FEATURES CT705EN(G) Flushometer Toilet, 1.28GPF when used with High Efficiency Flushometer Valve Floor-mounted Elongated front bowl Optional SanaGloss ceramic glaze - SanaGloss glaze prevents debris, mold and bacteria from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning. 10"-12" rough-in MODELS CT705ENG Commercial floor-mounted toilet with SanaGloss ceramic glaze CT705EN Commercial floor-mounted toilet ADDITIONAL ITEMS (sold separately) SC534 seat SC134 seat EcoPower COLORS/FINISHES FLUSH VALVES Standard #01 Cotton #03 Bone (not available in SanaGloss) #12 Sedona Beige (not available in SanaGloss) PRODUCT SPECIFICATION Manual TET1LN32#CP 1.28GPF TMT1LN32#CP 1.28GPF TET1GNC GPF TMT1NNC GPF TET6LN32#CP TET6GNC-32 TET3LN32#SS TET3GN32#SS TET2GN32#SS TET2LN32#SS 1.28GPF 1.6GPF 1.28GPF 1.6GPF 1.6GPF 1.28GPF CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, ASME A Certifications: IAPMO (cupc), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance The floor-mounted, low consumption siphon jet flushing toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF flushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF flushometer valve. Toilet shall be elongated front bowl and SanaGloss ceramic glaze (CT705ENG). Toilet shall be TOTO Model CT705E.

18 CT705EN(G) SPECIFICATIONS Flushometer Toilet, 1.28GPF when used with High Efficiency 1.28GPF Flushometer Valve) INSTALLATION NOTES Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF flush valve) Flush System Siphon jet flushing action Min. Water Pressure 35 psi (flowing) Min. Flow Rate 23 GPM Water Surface 10-1/4" x 9-5/8" Trap Diameter 1-7/8" Rough-in 12", or 10" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight CT705EN(G) lbs Shipping Dimensions CT705EN(G) 26-1/2"L x 9-1/2" W 1 x 16-1/4"W 2 x 17"H with 10" rough-in 25-1/4" (642mm) 25-1/4" (642mm) with 12" rough-in 5-1/2" (140mm) 14-3/8" (365mm) 5-1/2" (140mm) 14-3/8" (365mm) 18-1/2" (470mm) 26-1/8" (663mm) 18-1/2" (470mm) 28-1/8" (714mm) 4-3/4" (121mm) 1" (25.4mm) I.P.S. 3" (76mm) 1-1/2" (38mm) I.P.S. 5" (127mm) 1-1/2" (38mm) I.P.S. 14-3/8" (365mm) 15" (380mm) 15" (380mm) 26-1/2" (673mm) 10" (254mm) 12" (305mm) 9-1/8" (232mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.06 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

19 FEATURES CT705ELN(G) Flushometer ADA Toilet, 1.28GPF when used with High Efficiency Flushometer Valve Floor-mounted ADA compliant Elongated front bowl Optional SanaGloss ceramic glaze - SanaGloss glaze prevents debris, mold and bacteria from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning. 10"-12" rough-in MODELS CT705ELNG Commercial ADA compliant, floor-mounted toilet with SanaGloss ceramic glaze CT705ELN Commercial ADA compliant floor-mounted toilet ADDITIONAL ITEMS (sold separately) SC534 seat SC134 seat EcoPower COLORS/FINISHES FLUSH VALVES Standard #01 Cotton #03 Bone (not available in SanaGloss) #12 Sedona Beige (not available in SanaGloss) PRODUCT SPECIFICATION Manual TET1LN32#CP 1.28GPF TMT1LN32#CP 1.28GPF TET1GNC GPF TMT1NNC GPF TET6LN32#CP TET6GNC-32 TET3LN32#SS TET3GN32#SS TET2GN32#SS TET2LN32#SS 1.28GPF 1.6GPF 1.28GPF 1.6GPF 1.6GPF 1.28GPF CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, ASME A , Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant The floor-mounted, ADA compliant, low consumption siphon jet flushing toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF flushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF flushometer valve. Toilet shall be elongated front bowl and SanaGloss ceramic glaze (CT705ELNG). Toilet shall be TOTO Model CT705ELN.

20 CT705ELN(G) SPECIFICATIONS Flushometer ADA Toilet, 1.28GPF when used with High Efficiency 1.28GPF Flushometer Valve) INSTALLATION NOTES Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF flush valve) Flush System Siphon jet flushing action Min. Water Pressure 35 psi (flowing) Min. Flow Rate 23 GPM Water Surface 10-3/4" x 9-1/4" Trap Diameter 1-7/8" Rough-in 12", or 10" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight CT705ELN(G) lbs Shipping Dimensions CT705ELN(G) 26-1/2"L x 9-1/2" W 1 x 16-1/4"W 2 x 19-1/2"H with 10" rough-in with 12" rough-in 5-1/2" (140mm) 14-3/8" (365mm) 5-1/2" (140mm) 14-3/8" (365mm) 18-1/2" (470mm) 18-1/2" (470mm) 25-1/4" (642mm) 25-1/4" (642mm) 26-1/8" (663mm) 28-1/8" (714mm) *4-3/4" (121mm) 1" I.P.S 3" (76mm) 1-1/2" I.P.S 5" (127mm) 1-1/2" I.P.S 14-3/8" (365mm) 29"* (737mm) 17-1/2" (445mm) 17-1/2" (445mm) 10" (254mm) 12" (305mm) 9" (230mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.05 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

21 CT708E(G) & CT708EV(G) Wall-Mounted Flushometer Toilet, 1.28GPF when used with High Efficiency Flushometer Valve FEATURES Wall-mounted outlet Elongated front bowl Optional SanaGloss ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning. MODELS CT708E Commercial wall-mounted toilet with 1-1/2' top spud inlet, less seat CT708EG Commercial wall-mounted toilet with 1-1/2' top spud inlet, less seat with SanaGloss ceramic glaze CT708EV Commercial wall-mounted toilet with 1-1/2' back spud inlet, less seat CT708EVG Commercial wall-mounted toilet with 1-1/2' back spud inlet, less seat with SanaGloss ceramic glaze SC534 seat (sold separately) SC134 seat (sold separately) THU111 Retro-fit mounting bolt cap set (4 pcs sold separately) CT708E CT708EV FLUSHOMETER VALVES (sold separately) Manual EcoPower 1.28 GPF 1.6 GPF 1.28 GPF 1.6 GPF TMT1LN32#CP TMT1NNC-32 TET1LN32#CP TET1GNC-32#CP COLORS/FINISHES #01 Cotton #03 Bone #12 Sedona Beige CODES/STANDARDS TET6LN32#CP TET3LN#31#SS TET2LN#31#SS TET6GNC-32#CP TET3GN#31#SS TET2GN#31#SS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO (cupc), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others ADA Compliant PRODUCT SPECIFICATION The wall-mounted, low consumption siphon jet flushing system toilet shall be 1.28GPF/4.8LPF when paired with a 1.28GPF flushometer valve and 1.6GPF/6.0LPF when paired with 1.6GPF/6.0LPF flushometer valve. Toilet shall have optional SanaGloss ceramic glaze. Toilet can be mounted at ADA height. Toilet shall be elongated front bowl. Toilet shall be TOTO Model CT708E.

22 CT708E(G) & CT708EV(G) SPECIFICATIONS Wall-Mounted Flushometer Toilet, 1.28GPF when used with High Efficiency 1.28GPF Flushometer Valve Water Use 1.28GPF/4.8LPF (or 1.6GPF/6.0LPF when used with 1.6GPF flush valve) Flush System Siphon jet flushing action Min. Water Pressure 35 psi (flowing) Min. Flow Rate 23 GPM Water Surface 12" x 9-1/4" Trap Diameter 2-1/8" Trap Seal 2-5/8" Warranty One Year Limited Warranty Material Shipping Weight Vitreous china CT708E(G) - 49lbs CT708EV(G) lbs Shipping Dimensions CT708E(G) 17-1/8"L x 16" W x 26"H CT708EV(G) 15-1/2"L x 15-1/2" W x 26-3/8"H 5-1/2" (140mm) 2-3/4" (70mm) 1/16" (1.7mm) Wall Gap *6-3/8" (162mm) Finished Wall (Must be flat surface) 18-1/2" (470mm) 24-7/8" (632mm) Finished Floor *17" (432mm) *16" (406mm) 12-3/4" (323mm) *Suggested Dimension *4-3/4" (121mm) 15-3/8" (390mm) 1-1/2" (38mm) CT708E(G) 1" N.P.T. supply for Flushometer valve 11-1/2" (292mm) 2-3/8" (59mm) 7-1/2" (190mm) Wall 1-3/4" (45mm) China Standard bolt cap Note: If carrier bolt doesn t extend/or is flush with china, then use retrofit caps THU111 (sold separately). Wall finished wall China Proper Installation Retrofit bolt cap Installation surface of bowl has 1/16 wall gap across entire surface. 5-1/2" (140mm) 1/16" (1.7mm) Wall Gap 11-1/4" (285mm) *6-3/8" (162mm) Finished Wall (Must be flat surface) 18-1/2" (470mm) 24-7/8" (632mm) Finished Floor 3-7/8" (99mm) *17" (432mm) *16" (406mm) *Suggested Dimension 9" (229mm) CT708EV(G) 15-3/4"* (400mm) 3-1/2" (90mm) 2-3/8" (59mm) 7-1/2" 12-3/4" (190mm) (323mm) Improper Installation finished wall Ø Uneven Wall Gap Top and Bottom mounting surfaces must be in the same vertical plane. Baseboard 9" (229mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.06 Printed in U.S.A. TOTO USA 05/10 Printed on recycled paper

23 CT708H#01 Wall-Mounted, Bedpan Flushometer Toilet, 1.6GPF FEATURES Wall-mounted Elongated front bowl Bed pan lugs MODELS CT708H#01 Commercial wall-mounted toilet with 1-1/2' top spud inlet, less seat SC534 seat (sold separately) SC134 seat (sold separately) EXPOSED FLUSHOMETER VALVES (sold separately) Manual EcoPower TMT1NNC-32#CP TET1GNC-32#CP TET6GNC-32#CP COLORS/FINISHES Standard #01 Cotton CODES/STANDARDS PRODUCT SPECIFICATION The wall-mounted, low consumption siphon jet flushing system toilet shall be 1.6GPF/6.0LPF when paired with a 1.6GPF flushometer valve. Toilet can be mounted at ADA height. Toilet shall be elongated front bowl and bedpan lugs. Toilet shall be TOTO model CT708H#01. Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO (cupc), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others ADA Compliant

24 CT708H Wall-Mounted Flushometer Bedpan Toilet, 1.6GPF SPECIFICATIONS Water Use 1.6GPF/6.0LPF Flush System Siphon jet flushing action Min. Water Pressure 20 psi (static) Water Surface 12" x 9-1/4" Trap Diameter 2-1/8" Trap Seal 2-5/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight CT708H - 49lbs Shipping Dimensions CT708H 16"L x 15-1/2" W x 26"H INSTALLATION NOTES Wall 1-3/4" (45mm) China Standard bolt cap Note: If carrier bolt doesn t extend/or is flush with china, then use retrofit caps THU111 (sold separately). Wall finished wall China Proper Installation Retrofit bolt cap Installation surface of bowl has 1/16 wall gap across entire surface. Improper Installation finished wall Ø Uneven Wall Gap Top and Bottom mounting surfaces must be in the same vertical plane. Baseboard Finished Wall 5-1/2" (140mm) 18-1/2" (470mm) 4-3/4" (121mm) 1" N.P.T. for Flushometer Valve 2-3/4" (70mm) 24-1/2" (622mm) 15-3/8" (390mm) 1-1/2" (38mm) 11-1/2" (292mm) *6-3/8" (162mm) 16" (406mm) 17" (432mm) 12-3/4" (324mm) 7-1/2" (190mm) 2-5/16" (59mm) *Suggested Dimension 9" (229mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.03 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

25 CST744E(G)(R)(B) Eco Drake Close Coupled Toilet, 1.28GPF FEATURES E-Max flushing system Optional SanaGloss ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals. Close coupled commercial grade, high performance toilet Elongated front bowl and tank set, less seat Chrome trip lever 12" Rough-in, less supply MODELS CST744EG with SanaGloss (#01, #03, #11, #12) CST744E Same as above less SanaGloss (#51 only) CST744ERG with SanaGloss (#01, #03, #11, #12) and right hand trip lever CST744ER Same as above less SanaGloss (#01 only)and right hand trip lever CST744ERB* Same as CST744ER with right hand trip lever and boltdown tank lid (special order) (#01 Cotton only) COMPONENTS C744EG - Elongated Front Bowl with SanaGloss C744E - Elongated Front Bowl less SanaGloss ST743E - Tank and Cover only - Left-hand trip lever ST743ER - Tank and Cover only - Right-hand trip lever ST743ERB - Tank and Cover only - Right-hand trip lever and bolt-down lid (#01 Cotton only) SS114 SoftClose seat (sold separately) SC134 Commercial seat (sold separately) SC534 Commercial seat (sold separately) COLORS/FINISHES #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony PRODUCT SPECIFICATION The two-piece E-Max flushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have high-profile tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST744E. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance

26 CST744E(G)(R)(B) Eco Drake Close Coupled Toilet, 1.28GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.28 GPF/4.8LPF Flush System E-Max Min. Water Pressure 8 psi (static) Water Surface 10-1/4" x 8-1/2" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight C744E(G) - 52lbs ST743E(R)(B) - 35lbs Shipping Dimensions C744E(G) 29-1/2"L x 16"W1 x 10-1/4"W2 x 18-1/4"H Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST743E(R)(B) 20-1/8"L x 8-1/4"W x 15-1/2"H 5-1/2" (140mm) 14" (355mm) 18-1/2" (470mm) 1-1/8" (30mm) 28" (710mm) 19-1/2" (494mm) 28-1/2" (724mm) 1/2" Supply 14-5/8" (370mm) *8" (202mm) 12" (305mm) Ph: (888) Fax: (800) " (228mm) *6" (153mm) These dimensions and specifications are subject to change without notice # SS v.05 Printed in U.S.A. TOTO USA 02/10 Printed on recycled paper

27 FEATURES CST744EF(R).10 Eco Drake Close Coupled Toilet, 1.28GPF, 10" Rough-In E-Max flushing system, low consumption (1.28GPF/4.8LPF) Universal Height Two-piece design with high-profile tank Elongated front bowl and tank set, less seat ADA compliant Chrome trip lever 10" Rough-in, less supply MODELS CST744EF.10#01 Elongated bowl, 10" rough-in, less seat CST744EFR.10#01 Same as above with right hand trip lever COMPONENTS C744EF.10 - Elongated Front Bowl, 10" rough-in ST743E - Tank and Cover only - Left-hand trip lever ST743ER - Tank and Cover only - Right-hand trip lever SS114 SoftClose seat (sold separately) SC134 commercial seat (sold separately) SC534 commercial seat (sold separately) CODES/STANDARDS COLORS/FINISHES Standard #01 Cotton PRODUCT SPECIFICATION The two-piece low consumption E-Max flushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall be at universal height and be ADA compliant. Toilet shall have high-profile tank, elongated front bowl and Chrome trip lever. Toilet shall be TOTO Model CST744EF #01. Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance ADA compliant (when installed with trip lever located on the approach side)

28 CST744EF(R).10 Eco Drake Close Coupled Toilet, 1.28GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.28 GPF/4.8LPF Flush System E-Max Min. Water Pressure 8 psi (static) Water Surface 7-7/8" x 10-5/16" Trap Diameter 2-1/8" Rough-in 10" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight C744EF lbs. ST743E(R) 32 lbs. Shipping Dimensions C744EF.10 29" L X 15" W1 X 10-1/2" W2 X 17-1/8" H d Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST743E(R) 18" L X 9" W X 16" H 3/4 (20mm) 28 (713mm) 17-1/4 (438mm) 5-1/2 (140mm) 14 (355mm) 18-1/2 (470mm) 19-1/2 (494mm) *8 (230mm) 30-1/8 (756mm) 10 (254mm) 6 (153mm) 9-7/8 (251mm) * SUGGESTED DIMENSION Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.03 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

29 CST744EL Eco Drake Close Coupled Toilet, ADA, 1.28GPF FEATURES E-Max flushing system, low consumption (1.28GPF/4.8LPF) Universal Height Two-piece design with high-profile tank Elongated front bowl and tank set, less seat Chrome trip lever 12" Rough-in, less supply ADA compliant MODELS CST744EL Elongated bowl, 12" rough-in, less seat CST744ELR* Same as CST744EL with right hand trip lever (special order) CST744ELRB* Same as CST744EL with right hand trip lever and boltdown tank lid (special order) (#01 Cotton only) COMPONENTS C744EL - Elongated Front Bowl ST743E - Tank and Cover only - Left-hand trip lever ST743ER - Tank and Cover only - Right-hand trip lever ST743ERB - Tank and Cover only - Right-hand trip lever and bolt-down tank lid (#01 Cotton only) SS114 SoftClose seat (sold separately) SS204 SoftClose seat (sold separately) SC134 commercial seat (sold separately) SC534 commercial seat (sold separately) COLORS/FINISHES #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony PRODUCT SPECIFICATION The two-piece E-Max flushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall be universal height and ADA compliant. Toilet shall have high-profile tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST744EL. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance ADA compliant (when installed with trip lever located on the approach side)

30 CST744EL Eco Drake Close Coupled Toilet, ADA, 1.28GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.28 GPF/4.8LPF Flush System E-Max Min. Water Pressure 8 psi (static) Water Surface 10-3/8" x 8-1/4" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight C744EL lbs ST743E(R)(B) - 35lbs Shipping Dimensions C744EL 29-1/2"L x 16"W1 x 10-1/4"W2 x 18-1/4"H Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST743E(R)(B) 20-1/8"L x 8-1/4"W x 15-1/2"H 5-1/2" (140mm) 14" (355mm) 1-1/4" (30mm) 18-1/2" (470mm) 28" (710mm) 19-1/2" (494mm) 16-1/2" (420mm) 17-1/2" (445mm) 1/2" Supply 8"* (202mm) 30-1/2" (775mm) 12" (305mm) Ph: (888) Fax: (800) /8" (250mm) 6"* (153mm) These dimensions and specifications are subject to change without notice # SS v.05 Printed in U.S.A. TOTO USA 02/10 Printed on recycled paper

31 CST743E Eco Drake Close Coupled Toilet, 1.28GPF FEATURES E-Max flushing system Close coupled, high performance toilet Round front bowl and tank set, less seat Chrome trip lever 12" Rough-in, less supply MODELS CST743E Round bowl, 12" rough-in, less seat CST743ER Same as CST743E with right hand trip lever (special order) CST743ERB* Same as CST743ER with right hand trip lever and boltdown tank lid (special order) (#01 Cotton only) COMPONENTS C743E - Round Front Bowl ST743S - Tank and Cover only - Left-hand trip lever ST743SR - Tank and Cover only - Right-hand trip lever ST743SRB - Tank and Cover only - Right-hand trip lever and bolt-down lid (#01 Cotton only) SS113 SoftClose seat (sold separately) COLORS/FINISHES #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony PRODUCT SPECIFICATION The two-piece G-Max flushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have high-profile tank, round front bowl and chrome trip lever. Toilet shall be TOTO Model CST743E. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance

32 CST743E Eco Drake Close Coupled Toilet, 1.28GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.28 GPF/4.8LPF Flush System E-Max Min. Water Pressure 8 psi (static) Water Surface 10-1/4" x 8-1/2" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight C743E - 53lbs ST743S(R)(B) - 35lbs Shipping Dimensions C743E 27-3/4"L x 15"W1 x 10-1/4"W2 x 15-3/4"H Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST743S (R)(B) 20-1/8"L x 8-1/4"W x 15-1/2"H 16-1/2" (420 mm) 5-1/2" (140 mm) 14" (355 mm) 3/4" (20 mm) 26-3/8" (670 mm) 19-1/2" (494 mm) 14-5/8" (370 mm) 1/2" Supply *8" (203mm) 28-1/2" (724 mm) 12" (305 mm) *6" (152mm) * Suggested Dimension Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.04 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

33 CST744S(G) Drake Close Coupled Toilet, 1.6GPF FEATURES G-Max flushing system Optional SanaGloss ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning. Close coupled commercial grade, high performance toilet Elongated front bowl and tank set, less seat Chrome trip lever 12" Rough-in, less supply MODELS CST744SG Elongated bowl, SanaGloss, 12" rough-in, less seat CST744S Same as above less SanaGloss CST744SB* Same as CST744S with bolt down lid (special order) CST744SD* Same as CST744S with insulated tank (special order) CST744SDB* Same as CST744S with bolt down lid & insulated tank (special order) CST744SR* Same as CST744S with right hand trip lever (special order) COMPONENTS C744SL - Elongated Front Bowl ST743S - Tank and Cover only ST743SB - Tank and Cover only (bolt down lid) ST743SD - Tank and Cover only (insulated tank) ST743SDB - Tank and Cover only (bolt down lid and insulated tank) ST743SR - Tank and Cover only (right hand trip lever) SS114 SoftClose seat (sold separately) SS204 SoftClose seat (sold separately) SC134 commercial seat (sold separately) SC534 commercial seat (sold separately) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony PRODUCT SPECIFICATION The two-piece G-Max flushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall have high-profile tank, elongated front bowl and chrome trip lever. Toilet model CST744SG shall have SanaGloss ceramic glaze. Toilet shall be TOTO Model CST744S. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others

34 CST744S(G) Drake Close Coupled Toilet, 1.6GPF SPECIFICATIONS Water Use 1.6 GPF/6.0LPF Flush System G-Max Min. Water Pressure 8 psi (static) Water Surface 10-1/4" x 8-1/2" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight C744E(G) - 52lbs ST743S - 35lbs Shipping Dimensions C744E(G) 29-1/2"L x 16"W1 x 10-1/4"W2 x 18-1/4"H ST743S 20-1/8"L x 8-1/4"W x 15-1/2"H INSTALLATION NOTES Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO 5-1/2" (140mm) 14" (355mm) 18-1/2" (470mm) 1-1/8" (30mm) 28" (710mm) 19-1/2" (494mm) 28-1/2" (724mm) 1/2" Supply 14-5/8" (370mm) *8" (202mm) 12" (305mm) Ph: (888) Fax: (800) " (228mm) *6" (153mm) These dimensions and specifications are subject to change without notice # SS v.03 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

35 CST744SF(R).10 Drake Close Coupled Toilet, 1.6GPF, 10" Rough-In FEATURES G-Max flushing system, low consumption (1.6GPF/6.0LPF) Universal Height Two-piece design with high-profile tank Elongated front bowl and tank set, less seat ADA compliant Chrome trip lever 10" Rough-in, less supply MODELS CST744SF.10#01 Elongated bowl, 10" rough-in, less seat CST744SFR.10#01 Same as above with right hand trip lever COMPONENTS CT744EF.10 - Elongated Front Bowl, 10" rough-in ST743S - Tank and Cover only - Left-hand trip lever ST743SR - Tank and Cover only - Right-hand trip lever SS114 SoftClose seat (sold separately) SC134 seat (sold separately) SC534 seat (sold separately) COLORS/FINISHES Standard #01 Cotton PRODUCT SPECIFICATION The two-piece G-Max flushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be at universal height and be ADA compliant. Toilet shall have high-profile tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST744SF.10#01. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant (when installed with trip lever located on the approach side)

36 CST744SF(R).10 Drake Close Coupled Toilet, 1.6GPF SPECIFICATIONS Water Use 1.6 GPF/6.0LPF Flush System G-Max Min. Water Pressure 8 psi (static) Water Surface 10-5/16" x 7-7/8" Trap Diameter 2-1/8" Rough-in 10" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight CT744EF.10-48lbs ST744S(R) - 32lbs Shipping Dimensions CT744EF "L x 15"W1 x 10-1/2"W2 x 17-1/8"H INSTALLATION NOTES Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST743S(R) 18"L x 9"W x 16"H 3/4 (20mm) 17-1/4 (438mm) 5-1/2 (140mm) 14 (355mm) 18-1/2 (470mm) 28 (713mm) 19-1/2 (494mm) *8 (230mm) 30-1/8 (756mm) 10 (254mm) 6 (153mm) 9-7/8 (251mm) * SUGGESTED DIMENSION Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.03 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

37 CST744SL Drake Close Coupled Toilet, ADA, 1.6GPF FEATURES G-Max flushing system, low consumption (1.6GPF/6.0LPF) Universal Height Two-piece design with high-profile tank Elongated front bowl and tank set, less seat Chrome trip lever 12" Rough-in, less supply ADA compliant MODELS CST744SL Elongated bowl, 12" rough-in, less seat CST744SLB* Same as above with bolt down lid (special order) CST744SLD* Same as CST744SL with insulated tank (special order) CST744SLDB* Same as CST744SL with bolt down lid & insulated tank (special order) CST744SLR* Same as CST744SL with right hand trip lever (special order) COMPONENTS C744EL - Elongated Front Bowl ST743S - Tank and Cover only - Left-hand trip lever ST743SR - Tank and Cover only - Right-hand trip lever SS114 SoftClose seat (sold separately) SS204 SoftClose seat (sold separately) SC534 Seat (sold separately) SC134 Seat (sold separately) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony PRODUCT SPECIFICATION CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant (when installed with trip lever located on the approach side) The two-piece G-Max flushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be universal height and ADA compliant. Toilet shall have high-profile tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST744SL.

38 CST744SL Drake Close Coupled Toilet, ADA, 1.6GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.6 GPF/6.0LPF Flush System G-Max Min. Water Pressure 8 psi (static) Water Surface 10-3/8" x 8-1/4" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight C744EL lbs ST743S - 35lbs Shipping Dimensions C744EL 29-1/2"L x 16"W1 x 10-1/4"W2 x 18-1/4"H Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST743S 20-1/8"L x 8-1/4"W x 15-1/2"H 5-1/2" (140mm) 14" (355mm) 1-1/4" (30mm) 18-1/2" (470mm) 28" (710mm) 19-1/2" (494mm) 16-1/2" (420mm) 17-1/2" (445mm) 1/2" Supply 8"* (202mm) 30-1/2" (775mm) 12" (305mm) Ph: (888) Fax: (800) /8" (250mm) 6"* (153mm) These dimensions and specifications are subject to change without notice # SS v.04 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

39 CST743S Drake Close Coupled Toilet, 1.6GPF FEATURES G-Max flushing system Close coupled, high performance toilet Round front bowl and tank set, less seat Chrome trip lever 12" Rough-in, less supply MODELS CST743S Round bowl, 12" rough-in, less seat CST743SB* Same as CST743S with bolt down lid (special order) CST743SD* Same as CST743S with insulated tank (special order) CST743SDB* Same as CST743S with bolt down lid & insulated tank (special order) CST743SR* Same as CST743S with right hand trip lever (special order) COMPONENTS C743E - Round Front Bowl ST743S - Tank and Cover only - Left-hand trip lever ST743SB - Tank and Cover only - Bolt down lid ST743SD - Tank and Cover only - Insulated tank ST743SDB - Tank and Cover only - Bolt down lid and insulated tank ST743SR - Tank and Cover only - Right-hand trip lever SS113 SoftClose seat (sold separately) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony PRODUCT SPECIFICATION The two-piece G-Max flushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall have high-profile tank, round front bowl and chrome trip lever. Toilet shall be TOTO Model CST743S. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others

40 CST743S Drake Close Coupled Toilet, 1.6GPF SPECIFICATIONS Water Use 1.6 GPF/6.0LPF Flush System G-Max Min. Water Pressure 8 psi (static) Water Surface 10-1/4" x 8-1/2" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight C743E - 53lbs ST743S - 35lbs Shipping Dimensions C743E 27-3/4"L x 15"W1 x 10-1/4"W2 x 15-3/4"H INSTALLATION NOTES Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST743S 20-1/8"L x 8-1/4"W x 15-1/2"H 16-1/2" (420 mm) 5-1/2" (140 mm) 14" (355 mm) 3/4" (20 mm) 26-3/8" (670 mm) 19-1/2" (494 mm) 14-5/8" (370 mm) 1/2" Supply *8" (203mm) 28-1/2" (724 mm) 12" (305 mm) *6" (152mm) * Suggested Dimension Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.04 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

41 CST454CEF(R)(G) Drake II Close Coupled Toilet, 1.28GPF FEATURES Double Cyclone flushing system, low consumption (1.28GPF/4.8LPF) Optional SanaGloss ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals. Universal Height Decorative two-piece design with high-profile tank Elongated front bowl and tank set, less seat Chrome trip lever 12" Rough-in, less supply MODELS CST454CEFG With SanaGloss ceramic glaze CST454CEF COMPONENTS C454CEFG Elongated bowl with SanaGloss C454CEF Elongated bowl, less SanaGloss ST454E Tank and cover only ST454ER Tank and cover only, right-hand trip lever SS224 SoftClose seat (sold separately) SS214 SoftClose seat (sold separately) SS204 SoftClose seat (sold separately) SS114 SoftClose seat (sold separately) SC534 Commercial seat (sold separately) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony (not available in SanaGloss) PRODUCT SPECIFICATION The Two-piece low consumption Double Cyclone flushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have optional SanaGloss ceramic glaze and be at Universal Height. Toilet shall have high-profile tank, elongated front bowl and Chrome trip lever. Toilet shall be TOTO Model CST454CEF. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance ADA compliant (when installed with trip lever located on the approach side)

42 CST454CEF(R)(G) Drake II Close Coupled Toilet, 1.28GPF SPECIFICATIONS Water Use 1.28 GPF/4.8LPF Flush System Double Cyclone Min. Water Pressure 8 psi (static) Water Surface 7-1/8" x 9-1/8" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-1/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight C454CEF(G) 57.3lbs. ST454E(R) 31.5lbs. Shipping Dimensions C454CEF(G) 29" L X 14-3/4" W1 X 11-1/2" W2 X 16-1/4" H d INSTALLATION NOTES Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST454E(R) 18" L X 9" W X 16" H 28-5/16 (720mm) 18-1/2 (470mm) 5-1/2 (140mm) 14 (356mm) 13/16 (20mm) 16-1/2 (419mm) 17-1/4 (439mm) *8 (203mm) 30 (762mm) 12 (305mm) *5-7/8 (150mm) 9-7/8 (251mm) * SUGGESTED DIMENSION Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice SS v.09 Printed in U.S.A. TOTO USA 05/10 Printed on recycled paper

43 MS854114E(G)/MS853113E Eco UltraMax One-Piece Toilet, 1.28GPF FEATURES E-Max flushing system, low consumption (1.28GPF/4.8LPF) Optional SanaGloss ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals. One-piece decorative toilet with high-profile tank Elongated front bowl with SoftClose seat (SS114) or round front bowl with SoftClose seat (SS113) 12" Rough-in Chrome trip lever MODELS MS854114EG Elongated bowl with SanaGloss and SoftClose seat (SS114) MS854114E Elongated bowl with SoftClose seat (SS114) MS853113E Round bowl with SoftClose seat (SS113) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige PRODUCT SPECIFICATION The one-piece low consumption E-Max flushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall be of elongated front bowl (MS854) or round front bowl (MS853) with a high-profile tank and SoftClose seat. Toilet shall have optional SanaGloss ceramic glaze. Toilet shall have chrome trip lever. Toilet shall be TOTO Model MS85. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance

44 MS854114E(G)/MS853113E Eco UltraMax One-Piece Toilet, 1.28GPF SPECIFICATIONS Water Use 1.28 GPF/4.8 LPF Flush System E-Max Min. Water Pressure 8 psi (static) Water Surface 10-1/4" x 8-1/4" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight MS854114E(G) 93 lbs. MS853113E 91 lbs. INSTALLATION NOTES Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Shipping Dimensions 30-3/4" L x 18-1/8"W x 27-1/8" H Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO Finished Wall 18-1/2 (470mm) 16-1/2 (420mm) MS854114E(G) MS853113E 5-1/2 (140mm) 3/4 (20mm) 28 (710mm) 26-1/2 (675mm) MS854114E(G) MS853113E 16-1/2 (420mm) 27-1/8 (690mm) 14-5/8 (370mm) Finished Floor 1/2 supply *5 (127mm) 5-1/8 (130mm) * Suggested Dimension Finished Floor 12 (305mm) 9-7/8 (250mm) 8-5/8 (220mm) MS854114E(G) MS853113E Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.04 Printed in U.S.A. TOTO USA 08/09 Printed on recycled paper

45 FEATURES MS854114EL(G)(R) Eco UltraMax One-Piece Toilet, ADA Height, 1.28GPF E-Max flushing system, low consumption (1.28GPF/4.8LPF) Optional SanaGloss ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals. One-piece decorative toilet with high-profile tank Elongated front bowl with SoftClose seat (SS114) 12" Rough-in ADA compliant (when installed with trip lever located on the approach side) Chrome trip lever MODELS MS854114ELG ADA height toilet with elongated bowl, SanaGloss and SoftClose seat (SS114) MS854114EL ADA height toilet with elongated bowl and SoftClose seat (SS114) MS854114ELR#01 ADA height toilet with elongated bowl, right hand trip lever and SoftClose seat (SS114) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige PRODUCT SPECIFICATION The one-piece low consumption E-Max flushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall be of elongated front bowl (MS854) with a high-profile tank and SoftClose seat. Toilet shall be ADA compliant (when installed with trip lever located on the approach side). Toilet shall have chrome trip lever. Toilet shall have optional SanaGloss ceramic glaze. Toilet shall be TOTO Model MS854114EL. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance ADA compliant (when installed with trip lever located on the approach side)

46 MS854114EL(G) Eco UltraMax One-Piece Toilet, ADA Height, 1.28GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.28 GPF/4.8 LPF Flush System E-Max Min. Water Pressure 8 psi (static) Water Surface 10-1/4" x 8-1/4" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight MS854114EL(G) 117 lbs. Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Shipping Dimensions 32" L x 20"W x 17-3/4" H1 x 28-3/4" H2 Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO Finished Wall 18-1/2 (470mm) 5-1/2 (140mm) 1 (25mm) 28-1/4 (715mm) 16-1/2 (420mm) 29-1/4 (740mm) 17-1/4 (440mm) Finished Floor 1/2 supply *5 (127mm) 5-1/8 (130mm) * Suggested Dimension Finished Floor 12 (305mm) 9-3/4 (250mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.05 Printed in U.S.A. TOTO USA 08/09 Printed on recycled paper

47 MS854114S(G)/MS853113S UltraMax One-Piece Toilet, 1.6GPF FEATURES G-Max flushing system, low consumption (1.6GPF/6.0LPF) Optional SanaGloss ceramic glaze - SanaGloss glaze prevents debris, and mold from sticking to ceramic surfaces, leading to fewer chemicals. One-piece decorative toilet with high-profile tank Elongated front bowl with SoftClose seat (SS114) or round front bowl with SoftClose seat (SS113) 12" Rough-in Chrome trip lever MODELS MS854114SG Elongated bowl with SanaGloss and SoftClose seat (SS114) MS854114S Elongated bowl with SoftClose seat (SS114) MS853113S Round bowl with SoftClose seat (SS113) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige PRODUCT SPECIFICATION The one-piece G-Max flushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be of elongated front bowl (MS854) or round front bowl (MS853) with a low-profile tank and SoftClose seat. Toilet shall have chrome trip lever. Toilet shall have optional SanaGloss ceramic glaze. Toilet shall be TOTO Model MS85. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others

48 MS854114S(G)/MS853113S UltraMax One-Piece Toilet, 1.6GPF SPECIFICATIONS Water Use 1.6 GPF/6.0LPF Flush System G-Max Min. Water Pressure 8 psi (static) Water Surface 10-1/4" x 8-1/4" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight MS854114S(G) 93 lbs. MS853113S(G) 91 lbs. INSTALLATION NOTES Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Shipping Dimensions 30-3/4" L x 18-1/8"W x 27-1/8" H Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO Finished Wall 18-1/2 (470mm) 16-1/2 (420mm) MS854114S(G) MS853113S(G) 5-1/2 (140mm) 3/4 (20mm) 28 (710mm) 26-1/2 (675mm) MS854114S(G) MS853113S(G) 16-1/2 (420mm) 27-1/8 (690mm) 14-5/8 (370mm) Finished Floor 1/2 supply *5 (127mm) 5-1/8 (130mm) * Suggested Dimension Finished Floor 12 (305mm) 9-7/8 (250mm) 8-5/8 (220mm) MS854114S(G) MS853113S(G) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.05 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

49 MS854114SL UltraMax One-Piece Toilet, ADA Height, 1.28GPF FEATURES G-Max flushing system, low consumption (1.6GPF/6.0LPF) One-piece decorative toilet with high-profile tank Elongated front bowl with SoftClose seat (SS114) 12" Rough-in ADA compliant (when installed with trip lever located on the approach side) Chrome trip lever MODELS MS854114SL ADA height toilet with elongated bowl and SoftClose seat (SS114) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige PRODUCT SPECIFICATION The one-piece low consumption G-Max flushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be of elongated front bowl with a high-profile tank and SoftClose seat. Toilet shall be ADA compliant (when installed with trip lever located on the approach side). Toilet shall have chrome trip lever. Toilet shall be TOTO Model MS854114SL. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant (when installed with trip lever located on the approach side)

50 MS854114SL UltraMax One-Piece Toilet, ADA Height, 1.28GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.6 GPF/6.0 LPF Flush System G-Max Min. Water Pressure 8 psi (static) Water Surface 10-5/16" x 8-1/4" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-3/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight 99 lbs. Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Shipping Dimensions 32"L x 20"W x 17-3/4" H1 x 28-3/4" H2 Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO Finished Wall 18-1/2 (470mm) 5-1/2 (140mm) 1 (25mm) 28-1/4 (715mm) 16-1/2 (420mm) 29-1/4 (740mm) 17-1/4 (440mm) Finished Floor 1/2 supply *5 (127mm) 5-1/8 (130mm) * Suggested Dimension Finished Floor 12 (305mm) 9-3/4 (250mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.03 Printed in U.S.A. TOTO USA 08/09 Printed on recycled paper

51 MS604114CEF(R)(G) UltraMax II One-Piece Toilet, 1.28GPF FEATURES Double Cyclone flushing system, low consumption (1.28GPF/4.8LPF) SanaGloss ceramic glaze - SanaGloss glaze prevents debris and mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning Universal Height Decorative one-piece design with high-profile tank Elongated front bowl with SoftClose seat (SS114) 12" rough-in Chrome trip lever MODELS MS604114CEFG With SanaGloss ceramic glaze, SS114 SoftClose seat included (#01, #03, #11, #12) MS604114CEFRG Same as above, with right-hand trip lever (#01) MS604114CEF Less SanaGloss, SS114 SoftClose seat included (#51) COLORS/FINISHES #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony (not available in SanaGloss) PRODUCT SPECIFICATION The one-piece low consumption double cyclone flushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have SanaGloss ceramic glaze (except #51 Ebony) and be at Universal Height. Toilet shall have highprofile tank, elongated front bowl with SoftClose seat and Chrome trip lever. Toilet shall be TOTO Model MS604114CEF. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance ADA compliant (when installed with trip lever located on the approach side)

52 MS604114CEF(R)(G) UltraMax II One-Piece Toilet, 1.28GPF SPECIFICATIONS Water Use 1.28 GPF/4.8LPF Flush System Double Cyclone Min. Water Pressure 8 psi (static) Water Surface 7-1/8" x 9-1/8" Trap Diameter 2-1/8" Rough-in 12" Trap Seal 2-1/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight 99 lbs. Shipping Dimensions 32"L x 20"W x 17-3/4" H 1 x 28-3/4" H 2 d INSTALLATION NOTES Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO 3/4 (20mm) 5-1/2 (140mm) 15-11/16 (399mm) 28-5/16 (720mm) 6-3/16 (158mm) 16-9/16 (420mm) 16-1/8 (410mm) 17-1/4 (438mm) 6 (152mm) 1/2 (12mm) Supply* 5 (127mm) 28-3/4 (730mm) 12 (305mm) 9-13/16 (250mm) * Suggested Dimensions Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS v.05 Printed in U.S.A. TOTO USA 05/10 Printed on recycled paper

53 CST794EF Eco Nexus Close Coupled Toilet, 1.28GPF FEATURES E-Max flushing system, low consumption (1.28GPF/4.8LPF) Elongated skirted design Universal Height Decorative two-piece design with high-profile tank Chrome trip lever 12" Rough-in MODELS CST794EF COMPONENTS CT794EF Elongated bowl ST794E Tank and cover only ST794ER#01 Tank and cover only, right-hand trip lever SS204 SoftClose seat (sold separately) SS114 SoftClose seat (sold separately) SS304 SoftClose maple seat (sold separately) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony PRODUCT SPECIFICATION The two-piece low consumption E-Max flushing system toilet shall be 1.28GPF/4.8LPF. Toilet shall have highprofile tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST794EF. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative Compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance ADA compliant (when installed with trip lever located on the approach side)

54 CST794EF Eco Nexus Close Coupled Toilet, 1.28GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.28 GPF/4.8LPF Flush System E-Max Min. Water Pressure 8 psi (static) Water Surface 10-1/4" x 8-1/4" Trap Diameter 2-1/16" Rough-in 12" Trap Seal 2-1/4" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight CT794EF - 62lbs ST794E lbs Shipping Dimensions CT794EF 29-3/4"L x 16-1/2"W x 24-3/4"H Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST794E 20-3/8"L x 8-3/8"W x 19-5/8"H 28" (710mm) 18-1/2" (470mm) 5-1/2" (140mm) 14-1/2" (368mm) 3/4" (20mm) 7-1/4" (185mm) 17-7/8" (454mm) 32-1/2" (824mm) 17-1/8" (435mm) 1/2" Supply 4-1/2" (114mm)* 12" (305mm) 4" (102mm)* *Suggested Dimensions Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS v.04 Printed in U.S.A. TOTO USA 03/10 Printed on recycled paper

55 CST794SF Nexus Close Coupled Toilet, 1.6GPF FEATURES G-Max flushing system, low consumption (1.6GPF/6.0LPF) Elongated skirted design Universal Height Decorative two-piece design with high-profile tank Chrome trip lever 12" rough-in MODELS CST794SF COMPONENTS CT794EF Elongated bowl ST794S Tank and cover only ST794SR#01 Tank and cover only, right-hand trip lever SS204 SoftClose seat (sold separately) SS114 SoftClose seat (sold separately) SS304 SoftClose maple seat (sold separately) COLORS/FINISHES Standard #01 Cotton #03 Bone #11 Colonial White #12 Sedona Beige #51 Ebony PRODUCT SPECIFICATION The two-piece G-Max flushing system toilet shall be 1.6GPF/6.0LPF. Toilet shall be universal height and ADA compliant. Toilet shall have high-profile tank, elongated front bowl and chrome trip lever. Toilet shall be TOTO Model CST794SF. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant (when installed with trip lever located on the approach side)

56 CST794SF Nexus Close Coupled Toilet, 1.6GPF SPECIFICATIONS Water Use 1.6 GPF/6.0LPF Flush System G-Max Min. Water Pressure 8 psi (static) Water Surface 10-1/4" x 8-1/4" Trap Diameter 2-1/16" Rough-in 12" Trap Seal 2-1/4" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight CT794EF - 62lbs ST794S lbs Shipping Dimensions CT794EF 29-3/4"L x 16-1/2"W x 24-3/4"H INSTALLATION NOTES Back-to-Back Toilet Installations: TOTO recommends the use of a nationally listed, double sanitary tee-wye only, in vertical waste stacks, in accordance with the stipulations noted in the majority of nationally recognized plumbing codes. Double Combination Wye / 1/8 Bend YES Double Sanitary Tee / Sanitary Cross NO ST794S 20-3/8"L x 8-3/8"W x 19-5/8"H 28" (710mm) 18-1/2" (470mm) 5-1/2" (140mm) 14-1/2" (368mm) 3/4" (20mm) 7-1/4" (185mm) 17-7/8" (454mm) 32-1/2" (824mm) 17-1/8" (435mm) 1/2" Supply 4-1/2" (114mm)* 12" (305mm) 4" (102mm)* *Suggested Dimensions Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS v.05 Printed in U.S.A. TOTO USA 03/10 Printed on recycled paper

57 FEATURES CT418FG Aquia Wall-Hung Dual-Flush Toilet, 1.6GPF & 0.8GPF Dual-Max flushing system, low consumption (1.6GPF/6.0LPF & 0.8GPF/3.0LPF) SanaGloss ceramic glaze - prevents debris, mold from sticking to ceramic surfaces, leading to fewer chemicals and less water in cleaning. Universal Height Wall-hung toilet can be paired with TOTO in-wall tank system as well as others Can be mounted at standard or ADA height MODELS CT418FG#01 SS204 SoftClose seat (sold separately) SS114 SoftClose seat (sold separately) SC134 commercial seat (sold separately) SC534 commercial seat (sold separately) WT151M In-wall tank system (pex pipe) (sold separately) WT152M In-wall tank system (copper pipe) (sold separately) COLORS/FINISHES Standard #01 Cotton PRODUCT SPECIFICATION This universal height, low consumption Dual-Max flushing system toilet shall be 1.6GPF & 0.8GPF. Toilet shall have optional SanaGloss ceramic glaze. Toilet shall be mounted to in-wall tank system, elongated front bowl and wall-mounted push-button type trip lever. Toilet can be mounted at ADA height. Toilet shall be TOTO Model CT418FG#01. CODES/STANDARDS Meets or exceeds ASME A /CSA B45.1, ASME A Certifications: IAPMO (cupc), EPA Watersense, State of Massachusetts, City of Los Angeles, and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB715, California Green Building Code, City of Los Angeles Water Efficiency Ordinance ADA compliant (center mount actuator/trip lever is approach side neutral*) * consult with your local jurisdiction for special requirements

58 CT418FG Aquia Wall-Hung Dual-Flush Toilet, 1.6GPF & 0.8 GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.6 GPF & 0.8GPF (6.0 LPF & 3.0LPF) Flush System Dual-flush Min. Water Pressure 8 psi (static) Water Surface 5.5" X 4.75" Trap Diameter 2-1/8" Installation Height 15" to 19" Trap Seal 2-1/8" Warranty One Year Limited Warranty Material Vitreous china Shipping Weight CT418FG lbs Shipping Dimensions CT418FG 23-3/4" L X 15-3/4"W X 17.5" H Proper Installation finished wall Back of toilet even with installation surface. 1/16 Wall gap Improper Installation finished wall Ø Uneven Wall Gap Baseboard 21-1/16" (535mm) 14-3/16" (360mm) 1/16" Wall Gap 1-1/8" (29mm) 15" - 19" (380mm - 480mm) ø2-3/16" (ø55mm) 7-1/16" (180mm) 1-3/8" (35mm) 3-9/16" (90mm) ø5-5/16" (ø135mm) ø4" (ø102mm) ø1" (ø25mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS V.02 Printed in U.S.A. TOTO USA 12/09 Printed on recycled paper

59 WT151M / WT152M DuoFit In-Wall Tank System, 1.6GPF & 0.9GPF FEATURES Dual-Max flushing system, low consumption (1.6GPF/6.0LPF & 0.9GPF/3.4LPF) Avg. flush 1.28GPF Adjustable 15"-19" mounting height Saves up to 9" of floor space compared to standard floor-mounted toilet Support up to 880lbs Commercial 2" x 6" or optional residential installation with 2" x 4" wall studs with waste outlet kit 1-pc blow molded polyethylene tank to prevent leaks 2" x 6" Polyethylene outlet included Pre-plumbed for optional Washlet connection Complete with #01 Cotton bolt caps MODELS WT151M - with Pex-C washlet supply line WT152M - with copper washlet supply line WT151800M#WH - with Pex-C washlet supply line and YT800#WH white push plate WT152800M#WH - with copper washlet supply line and YT800#WH white push plate Optional Push Plates (sold separately) YT800#WH - White YT820#SS - Brushed Stainless Steel YT820#CP - Polished Chrome YT830#WH- Glass/White Optional Outlets (sold separately) THU343 2" x 4" outlet PVC THU335 2" x 6" outlet cast iron CT418FG Aquia wall-hung toilet by TOTO (sold separately) PRODUCT SPECIFICATION This universal height, high-efficiency, dual flushing, in-wall tank system toilet shall be 1.6GPF & 0.9GPF. Requires TOTO toilet model CT418FG. In-Wall tank system shall be TOTO Model WT15 M. White Brushed Stainless Steel or Polished Chrome CODES/STANDARDS Glass/White Meets and exceeds o Carrier system: ASME A o Tank trim: IAPMO PS50, CSA B125.3, ASSE1002 Certifications: IAPMO(cUPC), and others Code compliance: UPC, IPC, NSPC, NPC Canada, and others Shall be WaterSense certified

60 WT151M / WT152M DuoFit In-Wall Tank System, 1.6GPF & 0.9 GPF SPECIFICATIONS INSTALLATION NOTES Water Use 1.6 GPF & 0.9GPF (6.0 LPF & 3.4LPF) Flush System Dual-Max Min. Water Pressure 8 psi (static) Installation Height 15" to 19" (projected range) Warranty One Year Limited Warranty Material Various Shipping Weight WT151M / WT152M - 38lbs. Shipping Dimensions WT151M / WT152M 48" x 26-1/2" x 6" 3-1/2" 3-1/2" 2" x 4" or 2 x 6" 12.7" 12.7" 16" 16" 2" x 4" or 2 x 6" FFL 2" 9" of space saved over traditional floor-mounted toilet 5-1/2" 44-1/2" " Shown with CT418FG 2" x 6" installation with 6" cast-iron drain 1/2" NPT Water Supply 15" 19" Finished Floor Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS V.02 Printed in U.S.A. TOTO USA 12/09 Printed on recycled paper

YT830 Round Push Plate - Dual Button FEATURES Push plate with dual buttons that mounts to TOTO in-wall tank system (WT151M or WT152M) MODELS YT830#WH - Glass with white buttons SPECIFICATIONS

61 YT830 Round Push Plate - Dual Button FEATURES Push plate with dual buttons that mounts to TOTO in-wall tank system (WT151M or WT152M) MODELS YT830#WH - Glass with white buttons SPECIFICATIONS COLORS/FINISHES #WH - Glass with white buttons Warranty Material Shipping Weight 1-year limited warranty Glass/ABS 1.3lb or Carton (10pcs.) 14lb. Shipping Dimensions 9-1/4" x 6-1/2" x 1-1/2" Carton (10pcs.) 16" x 12" x 8" 8-3/4" 1/2" PRODUCT SPECIFICATION Push plate shall be model # YT830#WH. Push plate shall be glass with 2 white actuators on the front. Push plate shall be mounted to in-wall tank system WT151M or WT152M. 6" These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) # SS v.01 Printed in U.S.A. TOTO USA 08h/10 Printed on recycled paper

YT820 Convex Push Plate - Dual Button FEATURES Push plate with dual buttons that mounts to TOTO in-wall tank system (WT151M or WT152M) Push plate in brushed stainless steel or polished chrome is

63 YT820 Convex Push Plate - Dual Button FEATURES Push plate with dual buttons that mounts to TOTO in-wall tank system (WT151M or WT152M) Push plate in brushed stainless steel or polished chrome is robust and vandal-proof. A hidden mounting screw protects against theft. MODELS YT820#SS - Brushed Stainless Steel YT820#CP - Polished Chrome COLORS/FINISHES #SS - Brushed Stainless Steel SPECIFICATIONS Warranty Material Shipping Weight 1-year limited warranty Metal/ABS 1.2lb or Carton (10pcs.) 13lb. Shipping Dimensions 9-1/4" x 6-1/2" x 1-1/2" Carton (10pcs.) 16" x 12" x 8" #CP - Polished Chrome 8-1/2" 5/8" PRODUCT SPECIFICATION 5-5/8" Push plate shall be model # YT820# Push plate shall be either staineless steel or polished chrome with 2 actuators on the front. Push plate shall be mounted to in-wall tank system WT151M or WT152M. These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) # SS v.01 Printed in U.S.A. TOTO USA 08h/10 Printed on recycled paper

YT800#WH Rectangle Push Plate - Dual Button FEATURES Push plate with dual buttons that mounts to TOTO in-wall tank system (WT151M or WT152M) MODELS YT800#WH - White plastic SPECIFICATIONS

65 YT800#WH Rectangle Push Plate - Dual Button FEATURES Push plate with dual buttons that mounts to TOTO in-wall tank system (WT151M or WT152M) MODELS YT800#WH - White plastic SPECIFICATIONS COLORS/FINISHES Standard #WH - White Warranty Material Shipping Weight 1-year limited warranty ABS 0.6lb or Carton (10pcs.) 7lb. Shipping Dimensions 9-1/4" x 6-1/2" x 1-1/2" Carton (10pcs.) 16" x 12" x 8" 8-1/2" 3/4" PRODUCT SPECIFICATION Push plate shall be model # YT800#WH. Push plate shall be solid plastic with 2 actuators on the front. Push plate shall be mounted to in-wall tank system WT151M or WT152M. 5-3/4" These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) # SS v.01 Printed in U.S.A. TOTO USA 08h/10 Printed on recycled paper

SC134 Commercial Seat FEATURES Elongated closed front toilet seat and cover Mounting hardware included MODELS SC134 SPECIFICATIONS COLORS/FINISHES #01 Cotton Warranty 1-year limited warranty Material

67 SC134 Commercial Seat FEATURES Elongated closed front toilet seat and cover Mounting hardware included MODELS SC134 SPECIFICATIONS COLORS/FINISHES #01 Cotton Warranty 1-year limited warranty Material Polypropylene Shipping Weight 6 lbs. Shipping Dimensions 18-1/2" x 14-1/2" x 3" PRODUCT SPECIFICATION 5-1/2 (140mm) Seat shall be model # SC134 Seat shall be solid plastic with open front seat. Seat shall have integral bumpers. Hinges to be color matched with noncorrosive nylon stud and nut. PLEASE NOTE: 18-3/8 (467mm) Cannot be installed with the following models: MS874114S(G), MS884114, MS914114, MS904114, CST774S, CST804S, CST414M, CST416M, CST464MF, CST412MF, & CST412MF.10, CT418FG. 4 (102mm) 8-5/8 (219mm) 14-1/2 (368mm) These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) # SS v.03 Printed in U.S.A. TOTO USA 07/10 Printed on recycled paper

SC534 Commercial Seat FEATURES Elongated closed front toilet seat Mounting hardware included MODELS SC534 SPECIFICATIONS COLORS/FINISHES #01 Cotton Warranty 1-year limited warranty Material

69 SC534 Commercial Seat FEATURES Elongated closed front toilet seat Mounting hardware included MODELS SC534 SPECIFICATIONS COLORS/FINISHES #01 Cotton Warranty 1-year limited warranty Material Polypropylene Shipping Weight 6 lbs. Shipping Dimensions 18-1/2" x 14-1/2" x 3" PRODUCT SPECIFICATION Seat shall be model # SC534 Seat shall be solid plastic with open front seat. Seat shall have integral bumpers. Hinges to be color matched with noncorrosive nylon stud and nut. 5-1/2 (140mm) PLEASE NOTE: Cannot be installed with the following models: MS874114S(G), MS884114, MS914114, MS904114, CST774S, CST804S, CST414M, CST416M, CST464MF, CST412MF, & CST412MF.10, CT418FG. 18-5/8 (473mm) Ph: (888) Fax: (800) /4 (95mm) 14-3/4 (375mm) These dimensions and specifications are subject to change without notice # SS v.03 Printed in U.S.A. TOTO USA 07/10 Printed on recycled paper

UE930 Lloyd Urinal FEATURES Compact urinal with concealed integral trap Washout flush action Top spud inlet Can be mounted at ADA compliant height MODELS UE930#01 Lloyd urinal and electronic flush

71 UE930 Lloyd Urinal FEATURES Compact urinal with concealed integral trap Washout flush action Top spud inlet Can be mounted at ADA compliant height MODELS UE930#01 Lloyd urinal and electronic flush valve COMPONENTS UT930 Lloyd urinal only TEY1DNC-42 Lloyd electronic flush valve only, 1.0GPF or less COLORS/FINISHES Standard #01 Cotton PRODUCT SPECIFICATION Urinal shall be made of vitreous china. The wallmounted, ADA compliant, washout urinal shall be 1.0GPF or less when paired with TEY1DNC-42 flushometer valve. Urinal specified shall be model UE930. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB715, California Green Building Code ADA compliant

72 UE930 Lloyd Urinal SPECIFICATIONS Water Use 0.5GPF - 1.0LPF Flush System Spreader nozzle Warranty One Year Limited Warranty Material Vitreous china Min. Water Pressure 15 psi (flowing) Height (Urinal Only) 29-1/4" Width 16-1/2" Rim 14" Shipping Weight UE lbs Shipping Dimensions UE /16" L x 15-1/8" W x 17-3/4" H INSTALLATION NOTES Recommended Carrier: Jay R. Smith 0636 (Wall Hanger) 0637 (Wall Hanger with bottom) 4-1/4" (108mm) 2-1/2" (63mm) 16-1/2" (420mm) 9-1/2" (246mm) 11" (280mm) 6-1/2" (165mm) 1" (25mm) 5/8" Spud (16mm) 6" (150mm) 37-3/4" (960mm) Outlet 2" (51mm) I.P.S 5-1/8" (131mm) 42" (1068mm) 29-1/4" (744mm) 10-1/8" (258mm) 16-3/8" (415mm) 4-3/4" (120mm) 24" 19-1/2" (495mm) 14" (356mm) Outlet Detail 6" (152mm ) (610mm) 6" (152mm) *Suggested Dimensions 19-1/2" (495mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.02 Printed in U.S.A. TOTO USA 04/10 Printed on recycled paper

UT447E(V) 0.5GPF Low Consumption Washout Urinal FEATURES Compact urinal with concealed integral trap Washout flush action with 3/4" top or back spud inlet 0.

73 UT447E(V) 0.5GPF Low Consumption Washout Urinal FEATURES Compact urinal with concealed integral trap Washout flush action with 3/4" top or back spud inlet 0.5 GPF with any flush valve shown below MODELS UT447E Urinal with 3/4" top spud inlet UT447EV Urinal with 3/4" back spud inlet ADDITIONAL ITEMS (sold separately) THU3017 Stainless Steel Urinal Drain Cover RECOMMENDED FLUSH VALVES UT447E UT447EV EcoPower Manual EcoPower TEU1LN12#CP TMU1LN12#CP TEU2LN11#SS TEU3LN11#SS COLORS/FINISHES Standard #01 Cotton #03 Bone #12 Sedona Beige UT447E UT447EV PRODUCT SPECIFICATION The wall-mounted, ADA compliant, low consumption washout urinal shall be 0.5GPF/1.9LPF when paired with a 0.5GPF flushometer valve and 1.0GPF/3.8LPF when paired with 1.0GPF/3.8LPF flushometer valve. Urinal specified shall be model UT447E. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB715, California Green Building Code ADA compliant

74 UT447E(V) 0.5GPF Low Consumption Washout Urinal SPECIFICATIONS Water Use 0.5GPF/1.9LPF Flush System Washout flush action Warranty One Year Limited Warranty Material Vitreous china Min. Water Pressure 15 psi (flowing) Height (Urinal Only) 27-3/16" Width 18" Rim 14" Shipping Weight UT447E(V) - 60lbs Shipping Dimensions UT447E(V) 29-7/8" L x 16-3/4" W x 19-1/8" H UT447E UT447EV 3/4" (19mm) I.P.S. Supply 2-1/2" (63.5mm) Wall Brackets 17-1/8" (436mm) Wall Brackets 16-11/16" (424mm) 3/4" (19mm) Spud 4-3/4" (121mm) 12" (305mm) 18" (457mm) 11-1/2" (292mm) 27" (685mm) 3/4" (19mm) Spud 2-1/2" (63.5mm) Wall Brackets 17-1/8" (436mm) Wall Brackets 16-11/16" (424mm) 12" (305mm) 18" (457mm) 27" (685mm) Outlet 2" (51mm) I.P.S. 9-1/4" (235mm) 14" (356mm) Outlet Detail 6" (152mm) 17"* (432mm) 12-1/4"* (311mm) 6" (152mm) 17-1/2" (444mm) Finished Floor Line Outlet 2" (51mm) I.P.S. 9-1/4" (235mm) 14" (356mm) Outlet Detail 6" (152mm) 17"* (432mm) 12-1/4"* (311mm) 6" (152mm) 17-1/2" (444mm) Finished Floor Line *For ADA installation refer to local codes *For ADA installation refer to local codes Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.04 Printed in U.S.A. TOTO USA 08/10 Printed on recycled paper

ADDITIONAL ITEMS (sold separately) THU3010 Stainless Steel Urinal Drain Cover RECOMMENDED FLUSH VALVES UT104E UT104EV EcoPower Manual EcoPower TEU1LN12#CP TMU1LN12#CP TEU2LN11#SS TEU3LN11#SS UT104E

75 UT104E(V) 0.5GPF Low Consumption Washout Urinal FEATURES 0.5GPF Compact urinal with concealed integral trap Washout flush action with 3/4" top or back spud inlet MODELS UT104E Urinal with 3/4" top spud inlet UT104EV Urinal with 3/4" back spud inlet ADDITIONAL ITEMS (sold separately) THU3010 Stainless Steel Urinal Drain Cover RECOMMENDED FLUSH VALVES UT104E UT104EV EcoPower Manual EcoPower TEU1LN12#CP TMU1LN12#CP TEU2LN11#SS TEU3LN11#SS UT104E UT104EV COLORS/FINISHES Standard #01 Cotton #03 Bone #12 Sedona Beige PRODUCT SPECIFICATION The wall-mounted, ADA compliant, low consumption washout urinal shall be 0.5GPF/1.9LPF when paired with a 0.5GPF flushometer valve and 1.0GPF/3.8LPF when paired with 1.0GPF/3.8LPF flushometer valve. Urinal specified shall be model UT104E. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles Code compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB715, California Green Building Code ADA compliant

76 UT104E(V) 0.5GPF Low Consumption Washout Urinal SPECIFICATIONS Water Use 0.5GPF/1.9LPF Flush System Washout flush action Warranty One Year Limited Warranty Material Vitreous china Min. Water Pressure 15 psi (flowing) Height (Urinal Only) 21-3/4" Width 13" Rim 14" Shipping Weight UT104E(V) lbs Shipping Dimensions UT104E(V) 24" L x 13-3/4" W x 15-1/8" H UT104E UT104EV 3/4" (19mm) I.P.S. Supply for Flushometer Valve 14" (356mm) 2-1/2" (61mm) 4-3/4" (121mm) 13" (330mm) 9-7/8" (250mm) 11-1/2" (292mm) 1-1/2" (40mm) 14" (356mm) 13" (330mm) 9-7/8" (250mm) 3/4" (19mm) Spud 12-3/8" (315mm) 10-3/4" (273mm) 21-3/4" (552mm) 3/4" (19mm) Spud 12-3/8" (315mm) 10-3/4" (273mm) 21-3/4" (552mm) 2" (51mm) I.P. Inside Threads 4-1/4" (108mm) 17" (432mm) 12-1/2" (318mm) 4-1/4" (108mm) 2" (51mm) I.P. Inside Threads 4-1/4" (108mm) 17" (432mm) 12-1/2" (318mm) 4-1/4" (108mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.02 Printed in U.S.A. TOTO USA 06/09 Printed on recycled paper

LT502 Self-Rimming Lavatory FEATURES 19" diameter Vitreous china ADA compliant Concealed front overflow Complete with installation template and sealing compound MODELS LT502 Lavatory only with single

77 LT502 Self-Rimming Lavatory FEATURES 19" diameter Vitreous china ADA compliant Concealed front overflow Complete with installation template and sealing compound MODELS LT502 Lavatory only with single hole faucet center LT502.4 Lavatory only with 4" faucet centers LT502.8 Lavatory only with 8" faucet centers PRODUCT SPECIFICATION The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 19" in diameter. Product shall be with front overflow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT502. COLORS/FINISHES Standard #01 Cotton #03 Bone #12 Sedona Beige CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others ADA compliant Code compliance: UPC, IPC, NSPC, NPC Canada, and others

78 LT502 Self-Rimming Lavatory SPECIFICATIONS Waste Size Basin Warranty Material Shipping Weight Shipping Dimensions 1-1/4" O.D. 19" diameter 14-7/8"W x 12-12"D One Year Limited Warranty Vitreous china 21 lbs. 20-1/2"L x 20-1/2"W x 10-3/8"H 8" (203mm) 3-3/8" (84mm) 2-3/4"(70mm) 7-1/8" (180mm) 12-1/2" (317mm) 19" (483mm) ADA Compliance Check 14-7/8" (380mm) 19" (483mm) 1-1/8" (28mm) *14" (355mm) 8-1/2" (215mm) *13" (330mm) 8" (203mm) *8" (203mm) 34" (864mm) SUPPLIES 1-1/4" O.D. WASTE *31" (787mm) 27" (686mm) 6" (152mm) 9" (229mm) 18" (457mm) 17" (432mm) *Suggested Dimension Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS v.03 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

LT501 Self-Rimming Lavatory FEATURES 20" x 17" Vitreous china ADA compliant Concealed front overflow Complete with installation template and sealing compound MODELS LT501 Lavatory only with single

79 LT501 Self-Rimming Lavatory FEATURES 20" x 17" Vitreous china ADA compliant Concealed front overflow Complete with installation template and sealing compound MODELS LT501 Lavatory only with single hole faucet center LT501.4 Lavatory only with 4" faucet centers LT501.8 Lavatory only with 8" faucet centers COLORS/FINISHES PRODUCT SPECIFICATION The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 20" x 17". Product shall be with front overflow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT501. Standard #01 Cotton #03 Bone #12 Sedona Beige CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others ADA compliant Code compliance: UPC, IPC, NSPC, NPC Canada, and others

80 LT501 Self-Rimming Lavatory SPECIFICATIONS Waste 1-1/4" O.D. Size 20"W x 17"D Basin 15-1/4"W x 11-1/8"D Warranty One Year Limited Warranty Material Vitreous china Shipping Weight 20 lbs. Shipping Dimensions 21-5/8"L x 19-1/8"W x 10-3/8"H center faucet hole: 1-1/4" / 31mm 4" and 8" faucet hole: 1-3/8" / 35mm 8" (203mm) 2-1/8"(53mm) 2-5/8" (67mm) 6-5/8" (168mm) 11-1/8" (283mm) 17" (432mm) ADA Compliance Check 14-5/8" (372mm) 20" (508mm) 1" (25mm) *14" (355mm) *8" (203mm) 8-1/4" (210mm) *13" (330mm) 34" (864mm) 8" (203mm) SUPPLIES 1-1/4" O.D. WASTE *31" (787mm) 27" (686mm) 6" (152mm) 9" (229mm) 18" (457mm) *Suggested Dimension 17" (432mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.04 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

LT402 Self-Rimming Lavatory FEATURES 19-1/2" diameter Vitreous china ADA compliant Concealed front overflow Complete with installation template and sealing compound MODELS LT402#01 Lavatory only with

81 LT402 Self-Rimming Lavatory FEATURES 19-1/2" diameter Vitreous china ADA compliant Concealed front overflow Complete with installation template and sealing compound MODELS LT402#01 Lavatory only with single hole faucet center LT402.4#01 Lavatory only with 4" faucet centers LT402.8#01 Lavatory only with 8" faucet centers COLORS/FINISHES PRODUCT SPECIFICATION The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 19-1/2" in diameter. Product shall be with front overflow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT402. Standard #01 Cotton CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others ADA compliant Code compliance: UPC, IPC, NSPC, NPC Canada, and others

82 LT402 Self-Rimming Lavatory SPECIFICATIONS Waste 1-1/4" O.D. Size 19-1/2"diameter Basin 14-1/4"W x 14"D Warranty One Year Limited Warranty Material Vitreous china Shipping Weight 20-1/2 lbs. Shipping Dimensions 19-5/8"L x 19-5/8"W x 9-1/2"H 4" (102mm) 2-1/2" (64mm) 7-1/4" (184mm) 14-1/4" (362mm) 19-1/2" (495mm) ADA Compliance Check 14" (356mm) 19-1/2" (495mm) 1/2" (13mm) *14" (356mm) 8-1/4" (210mm) *13" (330mm) 8" (203mm) Supplies 8" (203mm) 1-1/4" O.D. Waste *31" (787mm) 34" (864mm) 27" (686mm) 6" (152mm) 9" (229mm) 18" (457mm) 17" (432mm) *Suggested dimension Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.04 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

LT401 Self-Rimming Lavatory FEATURES 17-3/4" x 20-3/4" Vitreous china ADA compliant Concealed front overflow Complete with installation template and sealing compound MODELS LT401 Lavatory only, with

83 LT401 Self-Rimming Lavatory FEATURES 17-3/4" x 20-3/4" Vitreous china ADA compliant Concealed front overflow Complete with installation template and sealing compound MODELS LT401 Lavatory only, with single hole faucet center LT401.4 Lavatory only with 4" faucet centers LT401.8 Lavatory only with 8" faucet centers PRODUCT SPECIFICATION The self-rimming lavatory shall be made of vitreous china. Lavatory shall be 20-3/4" x 17-3/4". Product shall be with front overflow and lavatory shall include mounting assembly and be ADA compliant. Lavatory shall be TOTO Model LT501. COLORS/FINISHES Standard #01 Cotton #03 Bone #12 Sedona Beige CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others ADA compliant Code compliance: UPC, IPC, NSPC, NPC Canada, and others

84 LT401 Self-Rimming Lavatory SPECIFICATIONS Waste 1-1/4" O.D. Size 20-3/8"W x 17-3/4"D Basin 15-1/2"W x 11"D Warranty One Year Limited Warranty Material Vitreous china Shipping Weight LT401/LT401.4/LT /2 lbs. Shipping Dimensions LT401/LT401.4/LT /4"L x 18-1/4"W x 9-1/2"H 4" (102mm) 2" (51mm) 6-3/4" (172mm) 11-1/4" (286mm) 17-3/4" (450mm) ADA Compliance Check 15-1/2" (394mm) 20-3/8" (518mm) 1/2" (13mm) *14" (356mm) 8-1/4" (210mm) *13" (330mm) 8" (203mm) 8" (203mm) Supplies 1-1/4" O.D. Waste *34" (864mm) 34" (864mm) 27" (686mm) 6" (152mm) 9" (229mm) 18" (457mm) 17" (432mm) *Suggested dimension Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS v.03 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

85 LT587 Undercounter Lavatory FEATURES MODELS COLORS/FINISHES CODES/STANDARDS PRODUCT SPECIFICATION

86 LT587 Undercounter Lavatory SPECIFICATIONS INSTALLATION NOTES 15" (381mm) 1-1/8" (28mm) 14" (355mm) *2-1/2" (63mm) 2-5/8" (68mm) *5-1/8" (131mm) 24 (610mm) 17-1/4 (437mm) 1-1/8" (28mm) 19" (483mm) 1-1/8" (28mm) 1-1/8" (28mm) 1-1/2 (37mm) 18" (457mm) 1/2" (12mm) 1/4 (50mm) *12" (305mm) 7-1/2" (191mm) 34 (864mm) *13-1/8" (333mm) *8" (203mm) 27 (686mm) 6 (152mm) 9 (229mm) *Suggested Dimension 17 (432mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS v.03 Printed in U.S.A. TOTO LTD. 07/10 Printed on recycled paper!

LT569 Undercounter Lavatory FEATURES 17" x 14" Vitreous china ADA compliant Concealed front overflow Mounting assembly complete with installation template, mounting screw set and sealing compound

87 LT569 Undercounter Lavatory FEATURES 17" x 14" Vitreous china ADA compliant Concealed front overflow Mounting assembly complete with installation template, mounting screw set and sealing compound MODELS LT569 (#01, #03, #12) COLORS/FINISHES Standard #01 Cotton #03 Bone #12 Sedona Beige CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others Meets ADA guidelines and ANSI A117.1 requirements when countertop is installed 864mm (34") from finished floor and lavatory is installed 205mm (8-1/8") minimum from front edge. PRODUCT SPECIFICATION The undercounter lavatory shall be made of vitreous china. Lavatory shall be 17"in length and 11" in width. Product shall be with overflow and lavatory shall include mounting assembly. Lavatory shall be ADA compliant. Lavatory shall be TOTO Model LT569.

88 LT569 Undercounter Lavatory SPECIFICATIONS INSTALLATION NOTES Waste 1-1/4" O.D. Size 19-1/4"W x 16-1/4"D Basin 17"W x 14"D Warranty One Year Limited Warranty Material Vitreous china Shipping Weight 17.4 lbs. Shipping Dimensions 22"W x 8-1/2"H x 18-1/2"L 1-1/8" (28mm) 2-1/2" (63mm) 2-5/8" (68mm) 5-1/8" (131mm) 14" (355mm) 13" (329mm) ADA Compliance Check 1-1/8" (28mm) 17" (432mm) 1-1/8" (28mm) 1-1/8" (28mm) 16" (406mm) 1/2" (12mm) *12" (305mm) 7-1/2" (191mm) *13-1/8" (333mm) 34" (864mm) 8" (203mm) *8" (203mm) *Suggested Dimension 27" (686mm) 6" (152mm) 9" (229mm) 18" (457mm) 17" (432mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.03 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

LT308 Wheelchair Users Lavatory FEATURES 20-1/2" x 27" Vitreous china ADA compliant Punching for concealed arm carrier No hardware included MODELS LT308 Lavatory only, with single hole LT308.

89 LT308 Wheelchair Users Lavatory FEATURES 20-1/2" x 27" Vitreous china ADA compliant Punching for concealed arm carrier No hardware included MODELS LT308 Lavatory only, with single hole LT308.4 Lavatory only with 4" faucet centers LT Lavatory only with 11" faucet centers LT308A Lavatory only with single hole. Right side soap hole LT308.4A Lavatory only with 4" faucet centers. Right side soap hole LT308.11A Lavatory only with 11" faucet centers. Right side soap hole. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others ADA compliant Code compliance: UPC, IPC, NSPC, NPC Canada, and others COLORS/FINISHES Standard #01 Cotton #03 Bone #12 Sedona Beige PRODUCT SPECIFICATION The wall-mount lavatory shall be made of vitreous china. Lavatory shall be 20-1/2"in length and 27" in width. Product shall be with front overflow and lavatory shall include mounting assembly. Lavatory shall be ADA compliant. Lavatory shall be TOTO Model LT308.

90 LT308 Wheelchair Users Lavatory SPECIFICATIONS Waste 1-1/4" O.D. Size 20-1/2"W x 27"D Basin 15-1/8"W x 14-3/4"D Warranty One Year Limited Warranty Material Vitreous china Shipping Weight LT308/LT308.4/LT lbs. Shipping Dimensions LT308/LT308.4/LT /8"L x 22-7/8"W x 10-5/8"H INSTALLATION NOTES TOTO recommends the use of Jay R. Smith 0700 ( M31) (Concealed Arms) or equal. 20-1/2" (520mm) 4" (102mm) 7-1/8" (182mm) 6-3/8" (161mm) 3-3/8" (85mm) 8-1/4" (209mm) 15-1/8" (384mm) 27" 6-7/8" (687mm) (174mm) 14-3/4" (375mm) 2-3/4" (70mm) SUPPLIES 1-1/4" O.D. WASTE 16-1/8" (410mm) *8" (203mm) 17-3/8" (440mm) ø2-5/32" (ø55mm) 8-1/8" (205mm) *10-3/4" (272mm) ø3/8" (ø11mm) *32"-34" ( mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS v.04 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

LT307(A) Commercial Wall-Hung Lavatory FEATURES 21" x 18-1/4" lavatory with back splash Vitreous china ADA compliant Punching for concealed arm carrier Includes wall hanger Punching for concealed arm

91 LT307(A) Commercial Wall-Hung Lavatory FEATURES 21" x 18-1/4" lavatory with back splash Vitreous china ADA compliant Punching for concealed arm carrier Includes wall hanger Punching for concealed arm carriers Soap dispenser hole MODELS LT307 Lavatory only, with single hole LT307.4 Lavatory only with 4" faucet centers LT307.8 Lavatory only with 8" faucet centers LT307A#01 (Cotton only) Lavatory only with single hole. Side soap hole CODES/STANDARDS Meets and exceeds ASME A /CSA B45.1, Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles, and others ADA compliant Code compliance: UPC, IPC, NSPC, NPC Canada, and others COLORS/FINISHES Standard #01 Cotton #03 Bone #12 Sedona Beige PRODUCT SPECIFICATION The lavatory shall be 21" width and 18-1/4" depth. The basin shall be 14-15/16" width by 10-3/8" depth. The lavatory shall be made of vitreous china and can be installed at ADA height with rear overflow. TOTO model number LT307A#01 shall be drilled for soap dispenser. Lavatory shall be TOTO model LT307.

92 LT307(A) Commercial Wall-Hung Lavatory SPECIFICATIONS Waste Size Warranty Material Shipping Weight Shipping Dimensions 1-1/4" O.D. 21"W x 18-1/4"D One Year Limited Warranty Vitreous china 40 lbs. 22-5/8"L x 19-1/8"W x 13-3/4"H INSTALLATION NOTES TOTO recommends the use of Jay R. Smith 0700 (Concealed Arms) with 19" arms 0800 (Wall Support Plate). 3-15/16 (100mm) 21 (533mm) 18-1/4 (464mm) 3-3/8 (86mm) 1-3/4 (44mm) 17-1/2 (191mm) 10-3/8 (264mm) 14-15/16 (380mm) 19-1/2 (496mm) 9-5/58" (244mm) 7-1/8" (181mm) *10-3/4 (273mm) *8-3/4 (222mm) SUPPLIES 4-1/2" (114mm) 33-11/16 (856mm) 1 1/4" WASTE OUTLET 8 (203mm) * SUGGESTED DIMENSION 6-5/16" (160mm) 10-1/2" (267mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS v.04 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

93 TMU1LN Series Non-Hold Open High-Efficiency Urinal Flushometer Valve gpf FEATURES Manual operated, non-hold open, urinal flushometer valve complete with 3/4 angle stop and 3/4 or 1-1/4" vacuum breaker set Piston valve action with 0.5 gpf Left/right rough-in MODELS TMU1LN#CP Valve only, Right/Left hand rough TMU1LN12#CP (3/4" Vacuum breaker) Right/Left hand rough Complete set supplied with: Vacuum breaker & angle stop set VB9CP-12 3/4 Angle stop 10077t4 3/4 Vacuum breaker 10075t2 Spud nut & escutcheon 71051Nt5 Sweat solder kit TH559EDVSJ1 TMU1LN22#CP (1-1/4" Vacuum breaker) Right/Left hand rough Complete set supplied with: Vacuum breaker & angle stop set VB9CP-22 3/4 Angle stop 10077t4 1-1/4 Vacuum breaker 10075t5 Spud nut & escutcheon 71051Nt7 Sweat solder kit TH559EDVSJ1 PRODUCT SPECIFICATION TOTO Model No. Manual type urinal flushometer valve, non-hold-open piston type with, self-cleaning debris screen and precise flushing capability. Low consumption water of 0.5 gpf/1.9 lpf model. Accessories to include angle stop with check valve, vacuum breaker. Sweat solder kit, spud nut and escutcheon. Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant

94 TMU1LN Series Non-Hold Open Urinal Flushometer Valve gpf SPECIFICATIONS Warranty Three Year Warranty Material Bronze casting with polished chrome finish Water Supply 3/4" NPT Fixture type Low consumption urinal 0.5 gpf / 1.9 lpf flushometer type Supply water pressure 15 psi psi* These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. MINIMUM 2-1/4 3/4 Inlet supply 11-1/2 1-1/2 NPSM 4-3/4 * *Adjustable to + _ 1/2 from standard These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00097, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

TMU1NNC Series Non-Hold Open Urinal Flushometer Valve - 1.

95 TMU1NNC Series Non-Hold Open Urinal Flushometer Valve gpf FEATURES Manual operated, non-hold open, urinal flushometer valve complete with 3/4 angle stop and 3/4 or 1-1/4"vacuum breaker set Piston valve action with 1.0 gpf Left/right rough-in MODELS TMU1NNC Valve only, Right/Left Hand Rough TMU1NNC-12 (3/4" Vacuum breaker) Right/Left Hand Rough Complete set supplied with: Vacuum breaker & angle stop set VB9CP-12 3/4 Angle stop 10077t4 3/4 Vacuum breaker 10075t2 Spud nut & escutcheon 71051Nt5 Sweat solder kit TH559EDVSJ1 TMU1NNC-22 (1-1/4" Vacuum breaker) Right/Left Hand Rough Complete set supplied with: Vacuum breaker & angle stop set VB9CP-22 3/4 Angle stop 10077t4 1-1/4 Vacuum breaker 10075t5 Spud nut & escutcheon 71051Nt7 Sweat solder kit TH559EDVSJ1 PRODUCT SPECIFICATION TOTO Model No. Manual type urinal flushometer valve, non-holdopen piston type with, self-cleaning debris screen and precise flushing capability. Low consumption 1.0 lpf/3.8 lpf model. Accessories to include angle stop with check valve, vacuum breaker. Sweat solder kit, spud nut and escutcheon. Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant

96 TMU1NNC Series Non-Hold Open Urinal Flushometer Valve gpf SPECIFICATIONS Warranty Three Year Warranty Material Bronze casting with polished chrome finish Water Supply 3/4" NPT Fixture type Low consumption urinal 1.0 gpf / 3.8 lpf flushometer type Supply water pressure 15 psi psi* These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. MINIMUM 2-1/4 3/4 Inlet supply 11-1/2 1-1/2 NPSM 4-3/4 * *Adjustable to 1/2 from standard These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00324, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

97 TEU1LN Series High-Efficiency Urinal EcoPower Flushometer Valve, 0.5 gpf FEATURES Hydropower self-generating system Electronic flushometer valve, neutral rough-in, complete with 3/4 angle stop and 1-1/4 or 3/4" vacuum breaker set 0.5 gpf or less Manual override button 12 hour automatic flush for trap seal protection MODELS TEU1LN#CP Valve only, Left and right rough, Polished Chrome finish TEU1LN12#CP (3/4" Vacuum breaker) Left and right rough, Polished Chrome finish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-12 3/4" Angle stop t4 3/4" Vacuum breaker t2 Spud nut & escutcheon Nt5 Sweat solder kit - TH559EDVSJ1 TEU1LN22#CP (1-1/4" Vacuum breaker) Left and right rough, Polished Chrome finish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-22 3/4" Angle stop t4 1-1/4" Vacuum breaker t5 Spud nut & escutcheon Nt5 Sweat solder kit - TH559EDVSJ1 Optional Part: Z-4000-J - Adapter for ground joint angle stops PRODUCT SPECIFICATION Piston Valve COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant TOTO Model No. Automatic infrared sensor activated, urinal flush valve. Heavy-duty zinc die cast cover with polished chrome finish. Vandal resistant hex head screws. Low water consumption of 0.5 gallon per flush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with selfcleaning mechanism. Automatic flush every twelve hours if not used. Angle stop and vacuum breaker included with accessories. Through the use of TOTO s EcoPower Flush Valves, using the valve 30 flushes per day will fully recharge the valve for up to 10 years.

98 TEU1LN Series High-Efficiency Urinal EcoPower Flushometer Valve, 0.5 gpf SPECIFICATIONS Warranty Three Year Warranty Material Bronze casting with polished chrome finish Power Supply Hydropower self-generating system Water Supply 3/4" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 0.5 gpf / 2.4 lpf Operating temperature F (0-40 C) Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twelve (12) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. 4-3/4 1/2" (120 13mm) 3/4" inlet supply Min.2-1/4"(57mm) 3/4"NPT 1-1/2" NPSM 11-1/2" (292mm) Max 19-11/16" (Max 500mm) 15 L Max 31-1/2" (Max 800mm) *Check local codes These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00056, v.04 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

99 TEU1GNC Series EcoPower Urinal Flushometer Valve, 1.0 gpf FEATURES Hydropower self-generating system Electronic flushometer valve, neutral rough-in, complete with 3/4 angle stop and 1-1/4 or 3/4" vacuum breaker set 1.0 gpf or less Manual override button 24 hour automatic flush for trap seal protection MODELS TEU1GNC Valve only, Left and right rough, Polished Chrome finish TEU1GNC-12 (3/4" Vacuum breaker) Left and right rough, Polished Chrome finish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-12 3/4" Angle stop t4 3/4" Vacuum breaker t2 Spud nut & escutcheon Nt5 Sweat solder kit - TH559EDVSJ1 TEU1GNC-22 (1-1/4" Vacuum breaker) Left and right rough, Polished Chrome finish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-22 3/4" Angle stop t4 1-1/4" Vacuum breaker t5 Spud nut & escutcheon Nt5 Sweat solder kit - TH559EDVSJ1 Piston Valve Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION TOTO Model No. Automatic infrared sensor activated, urinal flush valve. Heavy-duty zinc die cast cover with polished chrome finish. Vandal resistant hex head screws. Low water consumption of 1.0 gallon per flush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with selfcleaning mechanism. Automatic flush every twenty four hours if not used. Angle stop and vacuum breaker included with accessories. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

100 TEU1GNC Series EcoPower Urinal Flushometer Valve, 1.0 gpf SPECIFICATIONS NOTES Warranty Three Year Warranty Material Bronze casting with polished chrome finish Power Supply Hydropower self-generating system Water Supply 3/4" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.0 gpf / 3.8 lpf Operating temperature F (0-40 C) Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twenty-four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. TOTO s 1.0 gpf EcoPower flush valves use Fuzzy Logic technology to offer further water conservation. The flush valve s microprocessor measures the duration and frequency of use, then calculates the appropriate average volume per flush. In facilities with frequent use, the flush valve issues less water per flush with a full flush occurring every 5 uses. In facilities with infrequent use, the valve delivers the full flush every time. 4-3/4 1/2" (120 13mm) 3/4" inlet supply Min.2-1/4"(57mm) 3/4"NPT 1-1/2" NPSM 11-1/2" (292mm) Max 19-11/16" (Max 500mm) 15 L Max 31-1/2" (Max 800mm) *Check local codes These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) # SS-00057, v.01 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

101 TEU3LN Series High-Efficiency Urinal EcoPower Flushometer Valve, 0.5 gpf FEATURES Hydropower self-generating system Electronic flushometer valve complete with 3/4" angle stop and 1-1/4" or 3/4" vacuum breaker set 0.5 gpf or less Back spud - concealed 4" x 4" Cover plate 12 hour automatic flush for trap seal protection MODELS TEU3LN#SS Valve only, Surface mount, Satin finish TEU3LN11#SS (3/4" Vacuum breaker) Back spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 3/4" Angle stop t6 3/4" Vacuum breaker t6 Outlet tube - TH559EDV171 Sweat solder kit - SJ1 TEU3LN21#SS (1-1/4" Vacuum breaker) Back spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 3/4" Angle stop t6 1-1/4" Vacuum breaker t7 Outlet tube - TH559EDV172 Sweat solder kit - SJ1 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #SS Stainless Steel Satin finish CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION Piston Valve TOTO Model No. Automatic Infrared sensor activated, toilet valve. Heavy-duty 4 x 4 stainless steel coverplate with satin finish. Low water consumption of 0.5 gallons per flush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic flush every twelve hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. manual overide button incorporated. Through the use of TOTO s EcoPower Flush Valves, using the valve 30 flushes per day will fully recharge the valve for up to 10 years.

102 TOTO EcoPower TEU3LN Series High-Efficiency Urinal EcoPower Flushometer Valve, 0.5 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty Material Bronze casting with stainless steel satin finish Power Supply Hydropower self-generating system Water Supply 3/4" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 0.5 gpf / 2.4 lpf Operating temperature F (0-40 C) Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twelve (12) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. The recommended installation for the urinal flushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12 x 12 access panel or walk-in chase is required for service and maintainence. Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm). Contact TOTO for different thickness. DIAGRAM RECOMMENDED INSTALLATION Dimensions: Inch 3-3/8 1-3/4 4-3/4 Location of the Left water supply pipe 3/4 NPT 3-15/16 4-3/4 * 4-3/4 * Location of the Right water supply pipe 3/4 NPT of Supply and sensor Back Spud 1-1/4 Back Spud 3/4 Finished wall Finished wall 2-3/8 2-3/8 Supply Supply OVERRIDE BUTTON LOCATION SENSOR LOCATION 4-3/4 Opening in Wall: 3-15/16 x 3-15/16 Top of the Urinal Back spud (ø1-5/16 ) 3-15/ /2" (distance from Spud Hole to both of Supply and Sensor) *+/- 1/2 Urinal 3-3/4 13-1/2 Frame 13-1/2 Urinal Solder joint 3-3/4 These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00096, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

103 TEU3GN Series EcoPower Urinal Flushometer Valve, 1.0 gpf FEATURES Hydropower self-generating system Electronic flushometer valve complete with 3/4" angle stop and 1-1/4" or 3/4" vacuum breaker set 1.0 gpf or less Back spud - concealed 4" x 4" Cover plate 24 hour automatic flush for trap seal protection MODELS TEU3GN#SS Vavle only, Surface mount, Satin finish TEU3GN11#SS (3/4" Vacuum breaker) Back spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 3/4" Angle stop t6 3/4" Vacuum breaker t6 Outlet tube - TH559EDV171 Sweat solder kit - SJ1 TEU3GN21#SS (1-1/4" Vacuum breaker) Back spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 3/4" Angle stop t6 1-1/4" Vacuum breaker t7 Outlet tube - TH559EDV172 Sweat solder kit - SJ1 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #SS Stainless Steel Satin finish CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION Piston Valve TOTO Model No. Automatic Infrared sensor activated, toilet valve. Heavy-duty 4 x 4 stainless steel coverplate with satin finish. Low water consumption of 1.0 gallons per flush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic flush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

104 TOTO EcoPower TEU3GN Series EcoPower Urinal Flushometer Valve, 1.0 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty Material Bronze casting with stainless steel finish Power Supply Hydropower self-generating system Water Supply 3/4" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.0 gpf / 3.8 lpf Operating temperature F (0-40 C) Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twenty-four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. The recommended installation for the urinal flushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12 x 12 access panel or walk-in chase is required for service and maintainence. Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm). Contact TOTO for different thickness. NOTES TOTO s 1.0 gpf EcoPower flush valves use Fuzzy Logic technology to offer further water conservation. The flush valve s microprocessor measures the duration and frequency of use, then calculates the appropriate average volume per flush. In facilities with frequent use, the flush valve issues less water per flush with a full flush occurring every 5 uses. In facilities with infrequent use, the valve delivers the full flush every time. DIAGRAM RECOMMENDED INSTALLATION Dimensions: Inch 3-3/8 1-3/4 4-3/4 Location of the Left water supply pipe 3/4 NPT 3-15/16 4-3/4 * 4-3/4 * Location of the Right water supply pipe 3/4 NPT of Supply and sensor Back Spud 1-1/4 Back Spud 3/4 Finished wall Finished wall 2-3/8 2-3/8 Supply Supply OVERRIDE BUTTON LOCATION SENSOR LOCATION 4-3/4 Opening in Wall: 3-15/16 x 3-15/16 Top of the Urinal Back spud (ø1-5/16 ) 3-15/ /2" (distance from Spud Hole to both of Supply and Sensor) *+/- 1/2 Urinal 3-3/4 13-1/2 Frame 13-1/2 Urinal Solder joint 3-3/4 These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00095, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

105 TEU2LN Series High-Efficiency Urinal EcoPower Flushometer Valve, 0.5 gpf FEATURES Hydropower self-generating system Electronic flushometer valve complete with 3/4" angle stop and 1-1/4" or 3/4" vacuum breaker set 0.5 gpf or less Back spud - concealed 14"x 12" Cover plate 12 hour automatic flush for trap seal protection MODELS TEU2LN#SS Vavle only, Surface mount, Satin finish TEU2LN11#SS (3/4" Vacuum breaker) Back spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 3/4" Angle stop t6 3/4" Vacuum breaker t6 Outlet tube - TH559EDV171 Sweat solder kit - SJ1 TEU2LN21#SS (1-1/4" Vacuum breaker) Back spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 3/4" Angle stop t6 1-1/4" Vacuum breaker t7 Outlet tube - TH559EDV172 Sweat solder kit - SJ1 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #SS Stainless Steel Satin finish CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION Piston Valve TOTO Model No. Automatic infrared sensor activated, urinal flush valve. Heavy-duty 14"x12" stainless steel coverplate with satin finish. Vandal resistant hex head screws. Lower water consumption of 0.5 gallon per flush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve with stainless steel self cleaning debris screen and solenoid with self cleaning mechanism. Automatic flush every twelve hours if not used. Angle stop and vacuum breaker included with accessories. Electrical sensor separated from valve and sealed in waterproof compartment. Through the use of TOTO's EcoPower Flush Valves, using the valve 30 flushes per day will fully recharge the valve for up to 10 years.

106 TEU2LN Series High-Efficiency Urinal EcoPower Flushometer Valve, 0.5 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty The recommended installation for the urinal Material Bronze casting with flushometer valve is to have a 7" (178mm) minimum stainless steel finish space in wall. Power Supply Hydropower self-generating system Water Supply 3/4" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 0.5 gpf / 2.4 lpf Urinal type Low consumption wash down and jetted flush design urinals Operating temperature F (0-40 C) Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twelve (12) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. DIAGRAM RECOMMENDED INSTALLATION 11-15/16 Dimensions: Inch Opening in wall OVERRIDE BUTTON LOCATION SENSOR LOCATION 5-1/8 3-13/16 Back spud (ø1-5/16 ) 13-1/2 Opening in wall 4-3/4 * of Supply and sensor 13-1/2 (distance from Spud Hole to both of Supply and Sensor) Top of the Urinal *+/- 1/2 Back Spud 1-1/4 Back Spud 3/4 Finished wall 2-3/8 Finished wall 2-3/8 Supply Supply 13-1/2 13-1/2 Solder joint Urinal Urinal 3-3/4 3-3/4 These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00094, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

107 TEU2GN Series EcoPower Urinal Flushometer Valve, 1.0 gpf FEATURES Hydropower self-generating system Electronic flushometer valve complete with 3/4" angle stop and 1-1/4" or 3/4" vacuum breaker set 1.0 gpf or less Back spud - concealed 14"x 12" Cover plate 24 hour automatic flush for trap seal protection MODELS TEU2GN#SS Valve only, Surface mount, Satin finish TEU2GN11#SS (3/4" Vacuum breaker) Back spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-11 3/4" Angle stop t6 3/4" Vacuum breaker t6 Outlet tube - TH559EDV171 Sweat solder kit - SJ1 TEU2GN21#SS (1-1/4" Vacuum Breaker) Back spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-21 3/4" Angle stop t6 1-1/4" Vacuum breaker t7 Outlet tube - TH559EDV172 Sweat solder kit - SJ1 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #SS Stainless Steel Satin finish CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION Piston Valve TOTO Model No. Automatic infrared sensor activated, urinal flush valve. Heavy-duty 14"x12" stainless steel coverplate with satin finish. Vandal resistant hex head screws. Low water consumption of 1.0 gallons per flush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve with stainless steel self-cleaning debris screen and solenoid with self cleaning mechanism. Automatic flush every twenty four hours if not used. Angle stop and vacuum breaker included with accessories. Electrical sensor separated from valve and sealed in waterproof compartment. Through the use of TOTO's EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

108 TEU2GN Series EcoPower Urinal Flushometer Valve, 1.0 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty Material Bronze casting with stainless steel satin finish Power Supply Hydropower self-generating system Water Supply 3/4" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.0 gpf / 3.8 lpf Urinal type Low consumption wash down and jetted flush design urinals Operating temperature F (0-40 C) Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twenty-four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. The recommended installation for the urinal flushometer valve is to have a 7" (178mm) minimum space in wall. NOTES TOTO s 1.0 gpf EcoPower flush valves use Fuzzy Logic technology to offer further water conservation. The flush valve s microprocessor measures the duration and frequency of use, then calculates the appropriate average volume per flush. In facilities with frequent use, the flush valve issues less water per flush with a full flush occurring every 5 uses. In facilities with infrequent use, the valve delivers the full flush every time. DIAGRAM 11-15/16 Dimensions: Inch Opening in wall OVERRIDE BUTTON LOCATION SENSOR LOCATION 5-1/8 3-13/16 Back spud (ø1-5/16 ) 13-1/2 Opening in wall 4-3/4 * of Supply and sensor 13-1/2 (distance from Spud Hole to both of Supply and Sensor) Top of the Urinal *+/- 1/2 RECOMMENDED INSTALLATION Back Spud 1-1/4 Back Spud 3/4 Finished wall 2-3/8 Finished wall 2-3/8 Supply Supply 13-1/2 13-1/2 Solder joint Urinal Urinal 3-3/4 3-3/4 These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00093, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

109 TMT1LN Series Non-Hold Open High-Efficiency Toilet Flushometer Valve gpf FEATURES Manual operated, non-hold open, toilet flushometer valve complete with 1 angle stop and 1-1/2 vacuum breaker set Piston valve action with 1.28 gpf Left/right rough-in MODELS TMT1LN#CP Valve only, Right/Left hand rough TMT1LN32#CP (1-1/2" Vacuum breaker) Right/Left hand rough Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 1" Angle stop t3 1-1/2" Vacuum breaker t1 Spud nut & escutcheon Nt6 Sweat solder kit - TH559EDVSJ3 Optional Parts: Z-4000-J - Adapter for ground joint angle stops 10075T1L - 24" Long 1-1/2" vacuum breaker tube PRODUCT SPECIFICATION TOTO Model No. Manual toilet flushometer valve, non-hold-open piston type with self-cleaning debris screen and precise flushing capability. Low water consumption of 1.28 gpf / 4.8 lpf Polished Chrome exterior, angle stop with back-check and vacuum breaker included. COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant

110 TMT1LN Series Non-Hold Open High-Efficiency Toilet Flushometer Valve gpf SPECIFICATIONS Warranty Material Water Supply Fixture type Three Year Warranty Bronze casting with polished chrome finish 1" NPT Flushometer valve bowl 1.28 gpf / 4.8 lpf Supply water pressure 35 psi (flowing) psi* (minimum flow rate of 23 gpm) These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. MINIMUM 2-1/4 1 Inlet supply 4-3/4 * 1-1/2 NPSM 11-1/2 TMT1LN32#CP 1 in. NPT inlet and 1-1/2 in. outlet *Adjustable to + 1/2 from standard These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00098, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

111 TMT1NNC Series Non-Hold Open Toilet Flushometer Valve gpf FEATURES Manual operated, non-hold open, toilet flushometer valve complete with 1 angle stop and 1-1/2 vacuum breaker set Piston valve action with 1.6 gpf Left/right rough-in MODELS TMT1NNC Valve only, Right/Left hand rough TMT1NNC-32 (1-1/2" Vacuum breaker) Right/Left hand rough Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 1" Angle stop t3 1-1/2" Vacuum breaker t1 Spud nut & escutcheon Nt6 Sweat solder kit - TH559EDVSJ3 Optional Parts: Z-4000-J - Adapter for ground joint angle stops 10075T1L - 24" Long 1-1/2" vacuum breaker tube PRODUCT SPECIFICATION TOTO Model No. Manual toilet flushometer valve, non-hold-open piston type with self-cleaning debris screen and precise flushing capability. Low consumption 1.6 gpf models available. Polished Chrome exterior, angle stop with back-check and vacuum breaker included. COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant

112 TMT1NNC Series Non-Hold Open Toilet Flushometer Valve gpf SPECIFICATIONS Warranty Three Year Warranty Material Bronze casting with polished chrome finish Water Supply 1" NPT Fixture type Flushometer valve bowl 1.6 gpf / 6.0 lpf Supply water pressure 15 psi psi* These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. MINIMUM 2-1/4 1 Inlet supply 1-1/2 NPSM 4-3/4 * 11-1/2 *Adjustable to 1/2 from standard These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00036, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

113 TET1LN Series High-Efficiency Toilet EcoPower Flushometer Valve, 1.28 gpf FEATURES Hydropower self-generating system Electronic flushometer valve, neutral rough-in, complete with 1 angle stop and 1-1/2 vacuum breaker set 1.28 gpf or less Manual override button 24 hour automatic flush for trap seal protection MODELS TET1LN#CP Valve only, Left and right rough, Polished Chrome finish TET1LN32#CP (1-1/2" Vacuum breaker) Left and right rough, Polished Chrome finish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 1" Angle stop t3 1-1/2" Vacuum breaker t1 Spud nut & escutcheon Nt6 Sweat solder kit - TH559EDVSJ3 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES Piston Valve #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION TOTO Model No. Automatic infrared sensor activated, toilet flush valve. Heavy-duty zinc die cast cover with polished chrome finish. Vandal resistant hex head screws. Low water consumption of 1.28 gallons per flush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic flush every twenty four hours if not used. Angle stop and vacuum breaker included with accessories. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

114 TET1LN Series High-Efficiency Toilet EcoPower Flushometer Valve, 1.28 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty *Alternate ADA Installation Material Bronze casting with Mount grab bar at the 36 (914mm) maximum allowed polished chrome finish height or use the split grab bars. Power Supply Hydropower self-generating system Water Supply 1" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.28 gpf / 4.8 lpf Operating temperature F (0-40 C) Supply water pressure 35 psi (flowing) psi* (minimum flow rate of 23 gpm) Trap seal protection Automatically flushes once after twenty-four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. 4-3/4" 1/2" (120 13mm) Min.2-1/4" (57mm) 1"NPT 11-1/2" (292mm) Max19-11/16" (Max 500 mm) 15 L Max31-1/2" (Max 800 mm) **Check local codes These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00086, v.04 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

115 TET1GNC Series EcoPower Toilet Flushometer Valve, 1.6 gpf FEATURES Hydropower self-generating system Electronic flushometer valve, neutral rough-in, complete with 1 angle stop and 1-1/2 vacuum breaker set 1.6 gpf or less Manual override button 24 hour automatic flush for trap seal protection MODELS TET1GNC Valve only, Left and right rough, Polished Chrome finish TET1GNC-32 (1-1/2" Vacuum breaker) Left and right rough, Polished Chrome finish Complete set supplied with: Vacuum breaker & angle stop set - VB9CP-32 1" Angle stop t3 1-1/2" Vacuum breaker t1 Spud nut & escutcheon Nt6 Sweat solder kit - TH559EDVSJ3 Optional Part: Z-4000-J - Adapter for ground joint angle stops Piston Valve COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION TOTO Model No. Automatic infrared sensor activated, toilet flush valve. Heavy-duty zinc die cast cover with polished chrome finish. Vandal resistant hex head screws. Low water consumption of 1.6 gallons per flush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with selfcleaning mechanism. Automatic flush every twenty four hours if not used. Angle stop and vacuum breaker included with accessories. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

116 TET1GNC Series EcoPower Toilet Flushometer Valve, 1.6 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty *Alternate ADA Installation Material Bronze casting with Mount grab bar at the 36 (914mm) maximum allowed polished chrome finish height or use the split grab bars. Power Supply Hydropower self-generating system Water Supply 1" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.6 gpf / 6.0 lpf Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twenty-four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. 4-3/4" 1/2" (120 13mm) Min.2-1/4" (57mm) 1"NPT 11-1/2" (292mm) Max19-11/16" (Max 500 mm) 15 L Max31-1/2" (Max 800 mm) **Check local codes These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) # SS-00085, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

117 TET6LN Series High-Efficiency Toilet EcoPower Flushometer Valve, 1.28 gpf FEATURES Hydropower self-generating system Electronic flushometer valve, neutral rough-in, complete with 1 angle stop and 1-1/2 vacuum breaker set For use with 24" vacuum breakers 1.28 gpf or less Manual override button 24 hour automatic flush for trap seal protection MODELS TET6LN#CP Valve only, Left and right rough, Polished Chrome finish TET6LN32#CP (1-1/2" Vacuum Breaker) Left and right rough, Polished Chrome finish Complete set supplied with: Vacuum breaker & angle stop set - VBXCP-32 1" Angle stop t3 1-1/2" Vacuum breaker 24" long t1L Spud nut & escutcheon Nt6 Sweat solder kit - TH559EDVSJ3 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION Piston Valve TOTO Model No. Automatic infrared sensor activated, toilet flush valve designed for use with 24" vacuum breakers. Heavy-duty zinc die cast cover with polished chrome finish. Vandal resistant hex head screws. Low water consumption of 1.28 gallons per flush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with self-cleaning mechanism. Automatic flush every twenty four hours if not used. Angle stop and vacuum breaker included with accessories. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

118 TET6LN Series High-Efficiency Toilet EcoPower Flushometer Valve, 1.28 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty Material Bronze casting with polished chrome finish Power Supply Hydropower self-generating system Water Supply 1" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.28 gpf / 4.8 lpf Operating temperature F (0-40 C) Supply water pressure 35 psi (flowing) psi* (minimum flow rate of 23 gpm) Trap seal protection Automatically flushes once after twenty-four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. Alternate ADA Installation: Use split grab bars. 4-3/4" 1/2" (120 13mm) Min.2-1/4" (57mm) 1"NPT inlet supply 1-1/2" NPSM 27" (686mm) Max21-1/4" (Max 550 mm) 20º L Max33-1/2" (Max 850 mm) *Check local codes These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00088, v.01 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

119 TET6GNC Series EcoPower Toilet Flushometer Valve, 1.6 gpf FEATURES Hydropower self-generating system Electronic flushometer valve, neutral rough-in, complete with 1 angle stop and 1-1/2 vacuum breaker set For use with 24" vacuum breakers 1.6 gpf or less Manual override button 24 hour automatic flush for trap seal protection MODELS TET6GNC Valve only, Left and right rough, Polished Chrome finish TET6GNC-32 (1-1/2" Vacuum breaker) Left and right rough, Polished Chrome finish Complete set supplied with: Vacuum breaker & angle stop set - VBXCP-32 1" Angle stop t3 1-1/2" Vacuum breaker, 24" long T1L Spud nut & escutcheon Nt6 Sweat solder kit - TH559EDVSJ3 Optional Part: Z-4000-J - Adapter for ground joint angle stops Piston Valve COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION TOTO Model No. Automatic infrared sensor activated, toilet flush valve designed for use with 24" vacuum breakers. Heavy-duty zinc die cast cover with polished chrome finish. Vandal resistant hex head screws. Low water consumption of 1.6 gallons per flush. Automatic sensor adjustment on installation. Manual override button incorporated. Piston valve and solenoid with selfcleaning mechanism. Automatic flush every twenty four hours if not used. Angle stop and vacuum breaker included with accessories. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

120 TET6GNC Series EcoPower Toilet Flushometer Valve, 1.6 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty Alternate ADA Installation: Material Bronze casting with Use split grab bars. polished chrome finish Power Supply Hydropower self-generating system Water Supply 1" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.6 gpf / 6.0 lpf Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twenty-four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. 4-3/4" 1/2" (120 13mm) Min.2-1/4" (57mm) 1"NPT inlet supply 1-1/2" NPSM 27" (686mm) Max21-1/4" (Max 550 mm) 20º L Max33-1/2" (Max 850 mm) *Check local codes These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00087, v.01 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

121 TET3LN Series High-Efficiency Toilet EcoPower Flushometer Valve, 1.28 gpf FEATURES Hydropower self-generating system Electronic flushometer valve complete with 1" angle stop and 1-1/2" vacuum breaker set 1.28 gpf or less Back spud floor, top spud and back spud wall models - concealed 4" x 4" Cover plate 24 hour automatic flush for trap seal protection MODELS TET3LN#SS Valve only, Surface mount, Satin finish TET3LN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) 1" Angle stop t5 1-1/2" Vacuum breaker t4 Outlet tube - TH559EDV176 Sweat solder kit - SJ3 TET3LN32#SS (1-1/2" Vacuum breaker) Top spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) 1" Angle stop t5 1-1/2" Vacuum breaker t3 Outlet tube - TH559EDV177 Sweat solder kit - SJ3 TET3LN33#SS (1-1/2" Vacuum breaker) Back spud floor, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud floor) 1" Angle stop t5 1-1/2" Vacuum breaker t4 Outlet tube - TH559EDV175 Sweat solder kit - SJ3 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #SS Stainless Steel Satin finish CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION Piston Valve TOTO Model No. Automatic Infrared sensor activated, toilet valve. Heavy-duty 4 x 4 stainless steel coverplate with satin finish. Low water consumption of 1.28 gallons per flush. Piston valve with stainless steel selfcleaning debris screen and self-cleaning solenoid. Automatic flush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

122 TET3LN Series High-Efficiency Toilet EcoPower Flushometer Valve, 1.28 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty Material Bronze casting with stainless steel satin finish Power Supply Hydropower self-generating system Water Supply 1" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.28 gpf / 4.8 lpf Operating temperature F (0-40 C) Supply water pressure 35 psi (flowing) psi* (minimum flow rate of 23 gpm) Trap seal protection Automatically flushes once after twenty four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. The recommended installation for the toilet flushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12 x 12 access panel or walk-in chase is required for service and maintainence. Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements. Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm). Contact TOTO for different thickness. DIAGRAM RECOMMENDED INSTALLATION 3-3/8 Dimensions: Inch 1-3/4 4-3/4 TOTO EcoPower Opening in Wall: 3-15/16 x 3-15/16 4-3/4 * TET3LN-32#SS Top Spud TET3LN-33#SS Back Spud Floor Mount TET3LN-31#SS Back Spud Wall Mount Finished wall Finished wall Finished wall of 2-3/8 of 2-3/8 of 2-3/8 sensor Supply sensor Supply sensor Supply OVERRIDE BUTTON LOCATION SENSOR LOCATION of frame and fixture 4-3/4 * Supply * +/- 1/2 x 6-7-1/8 11 x 16 x frame 5 Elbow 2-1/4 Min. Nut Bowl Bowl 3 Bowl (3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") * 16 Always position the sensor above upright toilet seats and grab bars X= At least 5 clearance from sensor to tip of toilet seat up position or to top of grab bar is required to avoid false detection. Depending on X, the frame may not be centered to Supply C Las shown. *Leave some room for elbow nut from the wall for future maintenance. These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00092, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

123 FEATURES Hydropower self-generating system Electronic flushometer valve complete with 1" angle stop and 1-1/2" vacuum breaker set 1.6 gpf or less Back spud floor, top spud and back spud wall models - concealed 4" x 4" Cover plate 24 hour automatic flush for trap seal protection MODELS TET3GN#SS Valve only, Surface mount, Satin finish TET3GN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) 1" Angle stop t5 1-1/2" Vacuum breaker t4 Outlet tube - TH559EDV176 Sweat solder kit - SJ3 TET3GN32#SS (1-1/2" Vacuum breaker) Top spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) 1" Angle stop t5 1-1/2" Vacuum breaker t3 Outlet tube - TH559EDV177 Sweat solder kit - SJ3 TET3GN33#SS (1-1/2" Vacuum breaker) Back spud floor, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud floor) 1" Angle stop t5 1-1/2" Vacuum breaker t4 Outlet tube - TH559EDV175 Sweat solder kit - SJ3 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #SS Stainless Steel Satin finish CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant TET3GN Series EcoPower Toilet Flushometer Valve, 1.6 gpf PRODUCT SPECIFICATION Piston Valve TOTO Model No. Automatic Infrared sensor activated, toilet valve. Heavy-duty 4 x 4 stainless steel coverplate with satin finish. Low water consumption of 1.6 gallons per flush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic flush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

124 TET3GN Series EcoPower Toilet Flushometer Valve, 1.6 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty Material Bronze casting with stainless steel satin finish Power Supply Hydropower self-generating system Water Supply 1" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.6 gpf / 6.0 lpf Operating temperature F (0-40 C) Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twenty four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. The recommended installation for the toilet flushometer valve is to have a 7" (178mm) minimum space in wall. Also a minimum 12 x 12 access panel or walk-in chase is required for service and maintainence. Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements. Wall thickness: Min. 5/8" (16mm) - Max. 1-5/8" (41mm). Contact TOTO for different thickness. DIAGRAM RECOMMENDED INSTALLATION 3-3/8 Dimensions: Inch 1-3/4 4-3/4 TOTO EcoPower Opening in Wall: 3-15/16 x 3-15/16 4-3/4 * TET3GN-32#SS Top Spud TET3GN-33#SS Back Spud Floor Mount TET3GN-31#SS Back Spud Wall Mount Finished wall Finished wall Finished wall of 2-3/8 of 2-3/8 of 2-3/8 sensor Supply sensor Supply sensor Supply OVERRIDE BUTTON LOCATION SENSOR LOCATION of frame and fixture 4-3/4 * Supply * +/- 1/2 x 6-7-1/8 11 x 16 x frame 5 Elbow 2-1/4 Min. Nut Bowl Bowl 3 Bowl (3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") * 16 Always position the sensor above upright toilet seats and grab bars X= At least 5 clearance from sensor to tip of toilet seat up position or to top of grab bar is required to avoid false detection. Depending on X, the frame may not be centered to Supply C Las shown. *Leave some room for elbow nut from the wall for future maintenance. These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00091, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

125 High-Efficiency Toilet EcoPower Flushometer Valve, 1.28 gpf FEATURES Hydropower self-generating system Electronic flushometer valve complete with 1" angle stop and 1-1/2" vacuum breaker set Back spud floor, top spud and back spud wall models - concealed 14" x 12" Cover plate 24 hour automatic flush for trap seal protection TET2LN Series MODELS TET2LN#SS Valve only, Surface mount, Satin finish TET2LN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) 1" Angle stop t5 1-1/2" Vacuum breaker t4 Outlet tube - TH559EDV176 Sweat solder kit - SJ3 TET2LN32#SS (1-1/2" Vacuum breaker) Top spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) 1" Angle stop t5 1-1/2" Vacuum breaker t3 Outlet tube - TH559EDV177 Sweat solder kit - SJ3 TET2LN33#SS (1-1/2" Vacuum breaker) Back spud floor, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud floor) 1" Angle stop t5 1-1/2" Vacuum breaker t4 Outlet tube - TH559EDV175 Sweat solder kit - SJ3 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #SS Stainless Steel Satin finish CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION Piston Valve TOTO Model No. Automatic Infrared sensor activated, toilet valve. Heavy-duty 14 x 12 stainless steel coverplate with satin finish and vandal resistant mounting screws. Low water consumption of 1.28 gallons per flush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic flush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

126 TET2LN Series High-Efficiency Toilet EcoPower Flushometer Valve, 1.28 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty Material Bronze casting with stainless steel satin finish Power Supply Hydropower self-generating system Water Supply 1" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.28 gpf / 4.8 lpf Operating temperature F (0-40 C) Supply water pressure 35 psi (flowing) psi* (minimum flow rate of 23 gpm) Trap seal protection Automatically flushes once after twenty four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. The recommended installation for the toilet flush valve is to have a 7" (178mm) minimum space in wall. Do not place grab bars in front of sensor for ADA stalls. See diagram below for detailed measurements. DIAGRAM Dimensions: Inch 11-15/16 Opening in wall OVERRIDE BUTTON LOCATION 5-1/8 SENSOR LOCATION 3-13/ /2 Opening in wall 4-3/4 * Supply of sensor RECOMMENDED INSTALLATION TET2LN-32#SS Finished wall Finished wall Finished wall of 2-3/8 of 2-3/8 of 2-3/8 sensor Supply sensor Supply sensor Supply x 6-7-1/8 Top Spud 11 TET2LN-33#SS Back Spud Floor Mount x 16 TET2LN-31#SS Back Spud Wall Mount x frame 16 of frame and fixture fixture 14-3/4 * +/- 1/2 5 Elbow 2-1/4 Min. Nut Bowl Bowl 3 Bowl (3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") * Always position the sensor above upright toilet seats and grab bars X= At least 5 clearance from sensor to tip of toilet seat up position or to top of grab bar is required to avoid false detection. *Leave some room for elbow nut from the wall for future maintenance. These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00090, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

127 TET2GN Series EcoPower Toilet Flushometer Valve, 1.6 gpf FEATURES Hydropower self-generating system Electronic flushometer valve complete with 1" angle stop and 1-1/2" vacuum breaker set 1.6 gpf or less Back spud floor, top spud and back spud wall models - concealed 14" x 12" Cover plate 24 hour automatic flush for trap seal protection MODELS TET2GN#SS Valve only, Surface mount, Satin finish TET2GN31#SS (1-1/2" Vacuum breaker) Back spud wall, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-31 (Back spud wall) 1" Angle stop t5 1-1/2" Vacuum breaker t4 Outlet tube - TH559EDV176 Sweat solder kit - SJ3 TET2GN32#SS (1-1/2" Vacuum breaker) Top spud, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB9RB-32 (Top spud) 1" Angle stop t5 1-1/2" Vacuum breaker t3 Outlet tube - TH559EDV177 Sweat solder kit - SJ3 TET2GN33#SS (1-1/2" Vacuum breaker) Back spud floor, Satin finish Complete set supplied with: Vacuum breaker & angle stop set - VB13RB-33 (Back spud floor) 1" Angle stop t5 1-1/2" Vacuum breaker t4 Outlet tube - TH559EDV175 Sweat solder kit - SJ3 Optional Part: Z-4000-J - Adapter for ground joint angle stops COLORS/FINISHES #SS Stainless Steel Satin finish CODES/STANDARDS Meets or exceeds ASSE 1037, CSA B125.3 Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, City of Los Angeles, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others ADA compliant PRODUCT SPECIFICATION Piston Valve TOTO Model No. Automatic Infrared sensor activated, toilet valve. Heavy-duty 14 x 12 cover plate with stainless steel satin finish and vandal resistant mounting screws. Low water consumption of 1.6 gallons per flush. Piston valve with stainless steel self-cleaning debris screen and self-cleaning solenoid. Automatic flush every twenty four hours if not used. Electrical sensor separated from valve and sealed in a waterproof compartment. Manual overide button incorporated. Through the use of TOTO s EcoPower Flush Valves, using the valve 12 flushes per day will fully recharge the valve for up to 10 years.

128 TET2GN Series EcoPower Toilet Flushometer Valve, 1.6 gpf SPECIFICATIONS INSTALLATION NOTES Warranty Three Year Warranty The recommended installation for the toilet flush valve Material Bronze casting with is to have a 7" (178mm) minimum space in wall. Do not stainless steel satin finish place grab bars in front of sensor for ADA stalls. See Power Supply Hydropower self-generating diagram below for detailed measurements. system Water Supply 1" NPT Detection time Factory setting at six (6) seconds minimum Detection range Self-adjusting to environment Discharge quantity Preset to 1.6 gpf / 6.0 lpf Operating temperature F (0-40 C) Supply water pressure 15 psi psi* Trap seal protection Automatically flushes once after twenty four (24) hours of non-use These specifications are subject to change without notice. *Water pressures over 80 psi are not recommended for most plumbing fixtures. Check your local plumbing code for details. DIAGRAM Dimensions: Inch 11-15/16 Opening in wall OVERRIDE BUTTON LOCATION 5-1/8 SENSOR LOCATION 3-13/ /2 Opening in wall 4-3/4 * Supply of sensor RECOMMENDED INSTALLATION TET2GN-32#SS Finished wall Finished wall Finished wall of 2-3/8 of 2-3/8 of 2-3/8 sensor Supply sensor Supply sensor Supply x 6-7-1/8 Top Spud 11 TET2GN-33#SS Back Spud Floor Mount x 16 TET2GN-31#SS Back Spud Wall Mount x frame 16 of frame and fixture fixture 14-3/4 * +/- 1/2 Always position the sensor above upright toilet seats and grab bars X= At least 5 clearance from sensor to tip of toilet seat up position or to top of grab bar is required to avoid false detection. 5 Elbow 2-1/4 Min. Nut Bowl Bowl 3 Bowl (3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") * (3-3/4"- 4-7/8") * *Leave some room for elbow nut from the wall for future maintenance. These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00089, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

129 TEL3GS & TEL5GS Series Standard EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with aerated flow Self adjusting faucet with control box and mounting hardware, less supply lines 1/2 water supply male threaded NSF compliant Single-hole mount MODELS TEL3GS10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5GS10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V510 TEL3GS60#CP - Single Supply Discharge: On-demand; Up to 60 seconds while activated. TEL5GS60#CP - Thermal Mixing Discharge: On-demand; Up to 60 seconds while activated. Controller/Mixer #: TN78-10V560 Optional Accessories: 1.0 gpm Laminar Flow Nozzle: TH559EDV908 TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle Meets or exceeds ASME A /CSA B125.1, NSF 61-9, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Efficiency Ordinance ADA compliant PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline. *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

130 TEL3GS & TEL5GS Series Standard EcoPower Faucet SPECIFICATIONS NOTE Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 or 60 seconds Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. 4-1/2" (114mm) 3-15/16" 3-15/16" 2" (100mm) 2" (100mm) (50mm) 2-15/16" 4-1/2" (50mm) 2-15/16" (75mm) (114mm) 60 (75mm) /4" (260mm) Water supply F.L. 6" (152mm) 31" (787mm) 20-3/4" (527mm) 10-1/4" (260mm) 1-3/16" (30mm) 5-1/2" (140mm) 10-1/4" (260mm) F.L. HOT COLD 8" (203mm) 6" (152mm) 1" (25mm) 1-1/2" (38mm) 34" (864mm) 3-3/4" (95mm) 1" (25mm) 16-7/8" (428mm) 17-1/8" (436mm) 1-2/3" (42mm) 6-1/2" (165mm) Single Supply Maximum deck thickness 2" (50mm) Thermal Mixing These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00420, v.06 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

131 FEATURES TEL3GG & TEL5GG Series Gooseneck EcoPower Faucet Hydropower self-generating system Sensor faucet with aerated flow Self adjusting faucet with control box and mounting hardware, less supply lines 1/2 water supply male threaded NSF compliant Single-hole mount MODELS TEL3GG10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5GG10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V510 TEL3GG60#CP - Single Supply Discharge: On-demand; Up to 60 seconds while activated. TEL5GG60#CP - Thermal Mixing Discharge: On-demand; Up to 60 seconds while activated. Controller/Mixer #: TN78-10V560 Optional Accessories: 1.0 gpm Laminar Flow Nozzle: TH559EDV432 TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle Meets or exceeds ASME A /CSA B125.1, NSF 61-9, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Efficiency Ordinance ADA compliant PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated gooseneck spout faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline. *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

132 TEL3GG & TEL5GG Series Gooseneck EcoPower Faucet SPECIFICATIONS NOTE Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 or 60 seconds Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. 9-1/8" (231mm) 2" (50mm) 5-7/8" (149mm) 5-3/4" (146mm) 2" (50mm) 9-1/8" 10 (231mm) 5-7/8" (149mm) /4" (146mm) 10-1/4" (260mm) Water supply F.L. 6" (152mm) 31" (787mm) Single Supply Maximum deck thickness 2" (50mm) 20-3/4" (527mm) 10-1/4" (260mm) 1-3/16" (30mm) 5-1/2" (140mm) 10-1/4" (260mm) F.L. HOT COLD 8" (203mm) 6" (152mm) 1" (25mm) 1-1/2" (38mm) 3-3/4" (95mm) 1" (25mm) 34" (864mm) Thermal Mixing 16-7/8" (428mm) 17-1/8" (436mm) 1-2/3" (42mm) 6-1/2" (165mm) These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00417, v.07 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

TEL3LS & TEL5LS Series Standard EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with aerated flow Self adjusting faucet with control box and mounting hardware, less supply

133 TEL3LS & TEL5LS Series Standard EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with aerated flow Self adjusting faucet with control box and mounting hardware, less supply lines 1/2 water supply male threaded NSF compliant Single-hole mount MODELS TEL3LS10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5LS10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V710 Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen Meets or exceeds ASME A /CSA B125.1, NSF 61-9, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB 1953 & Vermont S.152, California Green Code, and City of Los Angeles Water Efficiency Ordinance ADA compliant PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.09 gallon per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. Both faucets use 0.09 gallon/cycle which is 55% below CALGreen's baseline. *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

134 TEL3LS & TEL5LS Series Standard EcoPower Faucet SPECIFICATIONS NOTE Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 0.09 gallons per cycle (max); 0.5 gallons per minute Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallon of water per cycle. The TOTO faucet with a 10 second cycle uses 0.09 gallon of water, or 0.5 gallon per minute. This is a 64% below the base line of 0.25 gallon per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. 4-1/2" (114mm) 3-15/16" 3-15/16" 2" (100mm) 2" (100mm) (50mm) 2-15/16" 4-1/2" (50mm) 2-15/16" (75mm) (114mm) 60 (75mm) /4" (260mm) Water supply F.L. 6" (152mm) 31" (787mm) 20-3/4" (527mm) 10-1/4" (260mm) 1-3/16" (30mm) 5-1/2" (140mm) 10-1/4" (260mm) F.L. HOT COLD 8" (203mm) 6" (152mm) 1" (25mm) 1-1/2" (38mm) 34" (864mm) 3-3/4" (95mm) 1" (25mm) 16-7/8" (428mm) 17-1/8" (436mm) 1-2/3" (42mm) 6-1/2" (165mm) Single Supply Maximum deck thickness 2" (50mm) Thermal Mixing These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00422, v.06 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

TEL3LG & TEL5LG Series Gooseneck EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with aerated flow Self adjusting faucet with control box and mounting hardware, less supply

135 TEL3LG & TEL5LG Series Gooseneck EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with aerated flow Self adjusting faucet with control box and mounting hardware, less supply lines 1/2 water supply male threaded Single-hole mount NSF compliant MODELS TEL3LG10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5LG10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V710 Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen Meets or exceeds ASME A /CSA B125.1, NSF 61-9, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Efficiency Ordinance ADA compliant PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.09 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. Both faucets use 0.09 gallon/cycle which is 55% below CALGreen's baseline. *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

136 TEL3LG & TEL5LG Series Gooseneck EcoPower Faucet SPECIFICATIONS NOTE Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 0.09 gallons per cycle (max) / 0.5 gallons per minute Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 seconds Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO faucet with a 10 second cycle uses 0.09 gallons of water, or 0.5 gallons per minute. This is a 64% below the base line of 0.25 gallons per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. 9-1/8" (231mm) 2" (50mm) 5-7/8" (149mm) 5-3/4" (146mm) 2" (50mm) 9-1/8" 10 (231mm) 5-7/8" (149mm) /4" (146mm) 10-1/4" (260mm) Water supply F.L. 6" (152mm) 31" (787mm) 20-3/4" (527mm) 10-1/4" (260mm) 1-3/16" (30mm) 5-1/2" (140mm) 10-1/4" (260mm) F.L. HOT COLD 8"(203mm) 6" (152mm) 1" (25mm) 1-1/2" (38mm) 34" (864mm) 3-3/4" (95mm) 1" (25mm) 16-7/8" (428mm) 17-1/8" (436mm) 1-2/3" (42mm) 6-1/2" (165mm) Single Supply Maximum deck thickness 2" (50mm) Thermal Mixing These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00421, v.07 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

TEL3GW & TEL5GW Series Helix Wall-Mount EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware, less

137 TEL3GW & TEL5GW Series Helix Wall-Mount EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware, less supply lines Wall 1/2 water supply male threaded NSF compliant MODELS TEL3GW10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5GW10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V410 TEL3GW60#CP - Single Supply Discharge: On-demand; Up to 60 seconds while activated. TEL5GW60#CP - Thermal Mixing Discharge: On-demand; Up to 60 seconds while activated. Controller/Mixer #: TN78-10V460R COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.13 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.13 gallon/cycle which is 35% below CALGreen's baseline. Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle Meets or exceeds ASME A /CSA B125.1, NSF 61-9, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Efficiency Ordinance ADA compliant *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

138 TEL3GW & TEL5GW Series SPECIFICATIONS Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 10 Second Faucet: 0.13 gallon per cycle (max) 60 Second Faucet: 0.8 gpm (3.0 lpm) Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 or 60 seconds Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) Helix Wall-Mount EcoPower Faucet NOTE Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO faucet with a 10 second cycle uses 0.13 gallons of water. This is a 48% below the base line of 0.25 gallons per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. 2-3/8 (60mm) 2 (50mm) to 5 (127mm) 7-5/16 (186mm) ø4x40 3 screws with anchors ~33 (838mm) overall length 2-3/8 (60mm) 2 (50mm) to 5 (127mm) ø4x40 3 screws with anchors 7-5/16 (186mm) ~33 (838mm) overall length Water Supply 6 (152mm) Single Supply Controller 8-5/8 (218mm) 6-1/4 10-1/4 (159mm) (260mm) 1-1/8 (30mm) HOT COLD 8 (203mm) 6 (152mm) Thermal Mixing Controller 1-3/8 (36mm) 3-3/4 (95mm) 1 (25mm) 17-1/8 6-5/8 (435mm) (168mm) 1-5/8 (42mm) Single Supply Thermal Mixing These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00083, v.06 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

TEL3GC & TEL5GC Series Helix EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware, less supply lines

139 TEL3GC & TEL5GC Series Helix EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware, less supply lines 1/2 water supply male threaded NSF compliant Single-hole mount MODELS TEL3GC10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5GC10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V510 TEL3GC60#CP - Single Supply Discharge: On-demand; Up to 60 seconds while activated. TEL5GC60#CP - Thermal Mixing Discharge: On-demand; Up to 60 seconds while activated. Controller/Mixer #: TN78-10V560 Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle Meets or exceeds ASME A /CSA B125.1, NSF 61-9, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Efficiency Ordinance ADA compliant PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline. *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

140 TEL3GC & TEL5GC Series Helix EcoPower Faucet SPECIFICATIONS NOTE Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 or 60 seconds Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. 1" (25mm) 4-15/16" (125mm) 1" (25mm) 6-5/8" (169mm) 4-15/16" (125mm) 6-5/8" (169mm 10-1/4" (260mm) Water supply F.L. 6" (152mm) 31" (787mm) 20-3/4" (527mm) 10-1/4" (260mm) 1-3/16" (30mm) 5-1/2" (140mm) 10-1/4" (260mm) F.L. HOT COLD 8" (203mm) 6" (152mm) 1" (25mm) 1-1/2" (38mm) 34" (864mm) 3-3/4" (95mm) 1" (25mm) 16-7/8" (428mm) 17-1/8" (436mm) 1-2/3" (42mm) 6-1/2" (165mm Single Supply Maximum deck thickness 2" (50mm) Thermal Mixing These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00418, v.06 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

TEL3GK & TEL5GK Series Axiom EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware, less supply lines

141 TEL3GK & TEL5GK Series Axiom EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware, less supply lines 1/2 water supply male threaded NSF compliant Single-hole mount MODELS TEL3GK10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5GK10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V510 TEL3GK60#CP - Single Supply Discharge: On-demand; Up to 60 seconds while activated. TEL5GK60#CP - Thermal Mixing Discharge: On-demand; Up to 60 seconds while activated. Controller/Mixer #: TN78-10V560 COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle Meets or exceeds ASME A /CSA B125.1, NSF 61-9, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Efficiency Ordinance ADA compliant PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline. *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

142 TEL3GK & TEL5GK Series Axiom EcoPower Faucet SPECIFICATIONS Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 or 60 seconds Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) NOTE Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallon of water per cycle. The TOTO faucet with a 10 second cycle uses 0.17 gallon of water. This is a 32% below the base line of 0.25 gallon per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. 1-3/16" (30mm) 6-5/16" (160mm) 4-11/16" (119mm) 1-3/16" (30mm) 6-5/16" (160mm) 4-11/16" (119mm) 10-1/4" (260mm) Water supply F.L. 6" (152mm) 31" (787mm) 20-3/4" (527mm) 10-1/4" (260mm) 1-3/16" (30mm) 5-1/2" (140mm) 10-1/4" (260mm) F.L. HOT COLD 8"(203mm) 6" (152mm) 1" (25mm) 1-1/2" (38mm) 34" (864mm) 3-3/4" (95mm) 1" (25mm) 16-7/8" (428mm) 17-1/8" (436mm) 1-2/3" (42mm) 6-1/2" (165mm) Single Supply Thermal Mixing Maximum deck thickness 2" (50mm) These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00415, v.06 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

TEL3GT & TEL5GT Series Fordham EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware, less supply

143 TEL3GT & TEL5GT Series Fordham EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware, less supply lines 1/2 water supply male threaded NSF compliant Single-hole mount MODELS TEL3GT10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5GT10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V510 TEL3GT60#CP - Single Supply Discharge: On-demand; Up to 60 seconds while activated. TEL5GT60#CP - Thermal Mixing Discharge: On-demand; Up to 60 seconds while activated. Controller/Mixer #: TN78-10V560 Optional Accessories: TN71V100S - 4" cc Cover Plate 71244T8CC - 8" cc Cover Plate COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle Meets or exceeds ASME A /CSA B125.1, NSF 61-9, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Efficiency Ordinance ADA compliant PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.17 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. Single hole faucet with optional 4" cc and 8" cc cover plates. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.17 gallon/cycle which is 15% below CALGreen's baseline. *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

144 TEL3GT & TEL5GT Series Fordham EcoPower Faucet SPECIFICATIONS Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 10 Second Faucet: 0.17 gal. per cycle (max) 60 Second Faucet: 1.0 gpm (4.0 lpm) Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 or 60 seconds Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) NOTE Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO faucet with a 10 second cycle uses 0.17 gallons of water. This is a 32% below the base line of 0.25 gallons per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. 1" (25mm) 4-15/16" (125mm) 1" (25mm) 6-5/8" 30 (169mm) /16" (125mm) 6-5/8" (169mm) 10-1/4" (260mm) Water supply F.L. 6" (152mm) 31" (787mm) 20-3/4" (527mm) 10-1/4" (260mm) 1-3/16" (30mm) 5-1/2" (140mm) 10-1/4" (260mm) F.L. HOT COLD 8"(203mm) 6" (152mm) 1" (25mm) 34" (864mm) 1-1/2" (38mm) 3-3/4" (95mm) 1" (25mm) 16-7/8" (428mm) 17-1/8" (436mm) 1-2/3" (42mm) 6-1/2" (165mm) Single Supply Maximum deck thickness 2" (50mm) Thermal Mixing These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00416, v.06 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

TEL3LGW & TEL5LGW Series Wall-Mount Gooseneck EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with aerated flow Self adjusting faucet with control box and mounting hardware,

145 TEL3LGW & TEL5LGW Series Wall-Mount Gooseneck EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with aerated flow Self adjusting faucet with control box and mounting hardware, less supply lines 1/2 water supply male threaded MODELS TEL3LGW10#CP - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5LGW10#CP - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V710 COLORS/FINISHES #CP Polished Chrome CODES/STANDARDS Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen Meets or exceeds ASME A /CSA B125.1 and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California Green Code and City of Los Angeles Water Efficiency Ordinance ADA compliant PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.09 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. Both faucets use 0.09 gallon/cycle which is 55% below CALGreen's baseline. *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

146 TEL3LGW & TEL5LGW Series Wall-Mount Gooseneck EcoPower Faucet SPECIFICATIONS Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 0.09 gallons per cycle (max) / 0.5 gallons per minute Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 seconds Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) NOTE Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO faucet with a 10 second cycle uses 0.09 gallons of water, or 0.5 gallons per minute. This is a 64% below the base line of 0.25 gallons per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. - Not recommended for 2 x 4 wall installation. - Access to back side of mounting surface is required for installation of spout mounting bracket. - Drilling is required for anti-rotation screw installation. - Plywood reinforcement is recommended for Drywall installation. Dimensions: Inch (mm) 2" (50mm) 1-3/8" (36mm) 5-9/16" (142mm) 7-1/2" (190mm) MAX. Wall Thickness* 2 (50mm) MIN. space req mt in WALL from finished wall 4 (100mm) 1-3/8" (35mm) 9-15/16" (251mm) Lavatory or finished wall (Mounting Surface) **Spout Hole Diameter 1-1/8" (28mm) 10 7" (177mm) Distance from Spout Mounting Hole to M5 Anti-Rotation* screw: 15/16" (24mm) Water supply F.L. 6" (152mm) 31" (787mm) 20-3/4" (527mm) 10-1/4" (260mm) 1-3/16" (30mm) 5-1/2" (140mm) 10-1/4" (260mm) HOT COLD 8"(203mm) F.L. 6" (152mm) 1" (25mm) 1-1/2" (38mm) 3-3/4" (95 mm) 1" (25mm) Single Supply Thermal Mixing *Spout has the anti-rotation feature with M5 set screw on Mounting Bracket and is good for Stainless Steel sinks installation. 34" (864mm) 16-7/8" (428mm) 17-1/8" (436mm) 1-5/8" (42 mm) 6-1/2" (165mm) **Spout Hole Diameter MAX. 1-1/2 (38mm) for Stainless Steel Sinks These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00615, v.01 Printed in U.S.A. TOTO USA 02/11 Printed on recycled paper

TEL3GM & TEL5GM Series Ryohan EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware,less supply lines

On-demand; Up to 10 seconds while activated. TEL5GM10#RY - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated.

147 TEL3GM & TEL5GM Series Ryohan EcoPower Faucet FEATURES Hydropower self-generating system Sensor faucet with laminar flow Self adjusting faucet with control box and mounting hardware,less supply lines 1/2" water supply male threaded Spout with special PVD finish designed to match Ryohan Suite Grid drain with cap included NSF compliant Single-hole mount MODELS TEL3GM10#RY - Single Supply Discharge: On-demand; Up to 10 seconds while activated. TEL5GM10#RY - Thermal Mixing Discharge: On-demand; Up to 10 seconds while activated. Controller/Mixer #: TN78-10V410 TEL3GM60#RY - Single Supply Discharge: On-demand; Up to 60 seconds while activated. TEL5GM60#RY - Thermal Mixing Discharge: On-demand; Up to 60 seconds while activated. Controller/Mixer #: TN78-10V460R COLORS/FINISHES #RY "Ryohan" PVD finish CODES/STANDARDS Exceeds mandatory baseline, 0.20 gallon/cycle, of California Green Building Code, CALGreen, by using TOTO faucets with 10 second cycle Meets or exceeds ASME A /CSA B125.1, NSF 61-9, and ASSE 1070* Certifications: IAPMO(cUPC), ASSE, State of Massachusetts, and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others Legislative compliance: California AB 1953 & Vermont S.152, and City of Los Angeles Water Efficiency Ordinance ADA compliant PRODUCT SPECIFICATION TOTO Model # Automatic infrared sensor activated faucet. Anti-scald, thermal mixing chamber (thermal faucets only). Automatic sensor adjustment on installation. Maximum discharge 0.13 gallons per 10 second cycle. Electrical components separated from spout assembly and sealed in waterproof compartments. All TEL5 series use an ASSE 1070 listed controller module with mixing valve. TOTO faucets with 10 second cycle use 0.13 gallon/cycle which is 35% below CALGreen's baseline. *Note: ASSE 1070 supersedes ASSE1016 for non-shower point of use devices. Applies to TEL5 series models.

148 TEL3GM & TEL5GM Series Ryohan EcoPower Faucet SPECIFICATIONS NOTE Warranty Three year warranty Material Brass Power Supply Hydropower self-generating system Hot/Cold-water Supply Minimum required water pressure: 20PSI Maximum water pressure: 125PSI* Water Supply Connect 1/2" NPSM Water Consumption 10 Second Faucet: 0.13 gallon per cycle (max) 60 Second Faucet: 0.8 gpm (3.0 lpm) Water Saving Function Automatically turns OFF when user removes hands Maximum continuous run time is 10 or 60 seconds Detection time ON feature: Immediate OFF feature: 1 second delay Detection range Factory set at 2-1/4" Faucet automatically sets the detection range according to the size of the basin Discharge water Thermal Mixing Faucet: temperature control Cold water F (Max) range (When used under standard conditions) Anti-scald safety Provides the user protection feature against exposure to excessive water temperature (Thermal mixing faucet, only) Following the Federal mandate for water efficiency outlined in the Environmental Protection Act of 1992, Faucets can be rated for water consumption based on two categories: flow rate and water consumption. With the Water Consumption standard, a faucet must not use more than 0.25 gallons of water per cycle. The TOTO faucet with a 10 second cycle uses 0.13 gallon of water. This is a 48% below the base line of 0.25 gallons per cycle. Furthermore, an innovative design feature incorporated into all TOTO electronic faucets is an "ON-DEMAND" mode. This means that the faucet will only delver water as needed and will not run the entire duration of its rated cycle - either 10 or 60 seconds. This guarantees additional water savings. TOTO uses water consumption because it is the most accurate method of measuring water use. This method of measurement can be incorporated into water usage calculations for various efficiency programs. For more information, please consult *Water pressures over 80 psi are not recommended for most plumbing fixtures. 6-5/8" (168mm) 1-3/4"(45mm) Faucet 8-1/8" (207mm) 2-3/4" (70mm) /8" (168mm) 1-3/4"(45mm) Faucet 8-1/8" (207mm) 2-3/4" (70mm) 75 Water Supply Single Supply Controller HOT COLD 1-3/8" (36mm) 8-5/8 (218mm) 8" (203mm) 3-3/4" (95mm) 1-1/4" 1-1/8" 6" 1" (25mm) 10-1/4" (159mm) (30mm) (152mm) 6" (260mm) (152mm) Thermal Mixing Controller 17-1/8" (435mm) 6-5/8" (168mm) 1-5/8" (42mm) Please confirm the basin dimension of lavatory, to which the faucet will be installed, making sure that it has recommended minimum dimensions of (L x W: 15" x 15"). Single Supply Maximum deck thickness 2" (50mm) Thermal Mixing Faucet hole diameter: Min. 28mm (~ 1-1/16") to Max. 35mm (~ 1-3/8") These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00419, v.06 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

149 TES_ADC-05 & TES_ADC-12 Series Sensor Operated TOTO Soap Dispenser FEATURES MODELS CODES/STANDARDS PRODUCT SPECIFICATION COLORS/FINISHES

150 TES_ADC-05 & TES_ADC-12 Series Sensor Operated TOTO Soap Dispenser SPECIFICATIONS INSTALLATION NOTES TOTO TES1ADC-05 TES3ADC-12 (Special Order) 16' 5" (5m) Tube and Cord WALL SURFACE 39' 5" (12m) Tube and Cord Air Deflation Hose Depth: 8-1/4 (210mm) 1.06 gallon tank FLOOR SURFACE 15-3/4 (400mm) 5.8 Gallon Tank 14-3/16 (360mm) 16' 5" (5m) Connecting Tube 1.06 gallon tank Not to be scaled These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) #SS-00084, v.04 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper!

FEATURES HDR100#GY Sensor Activated Clean Dry High Speed Hand Dryer AC powered hand dryer, equipped with very fast and quiet motor providing 224 mph air speed with only 62 db noise rating Takes only

151 FEATURES HDR100#GY Sensor Activated Clean Dry High Speed Hand Dryer AC powered hand dryer, equipped with very fast and quiet motor providing 224 mph air speed with only 62 db noise rating Takes only 12 seconds to dry hands Touch free infra red sensor activation with power saving function which turns the motor off automatically when hands are removed or after 60 seconds of use Drip tray to prevent water from trickling to the floor Hard wired COLORS/FINISHES #GY Gray CODES/STANDARDS Meets or exceeds UL507, CSA C22.2 #113-M1984 Certifications: Intertek/ETL Code Compliance: NEC, CEC PRODUCT SPECIFICATION TOTO Model No. Automatic infrared sensor activated, high speed hand dryer. 120 V AC power hardwiring required. Decibel rating of 62 db for low noise level while providing 224 mph air speed for fast drying. Low power consumption of 510 Watts. Drain Tray to collect water from hands.

152 # HDR100#GY Sensor Activated Clean Dry High Speed Hand Dryer SPECIFICATIONS INSTALLATION NOTES Warranty Power Connection Power Rating One Year Warranty Hardwired 120V AC, 4.25 Amps, 60 Hz, 510 W Power Saving Function Automatically turns OFF when hands are removed or after 60 seconds of use Decibel Rating 62dB Air Speed 224 mph (100 meters/ second) Dry Time 12 seconds* Drain Tray Capacity 0.20 gal (700 ml) Size 9-5/8 x 18-1/2 x 6-5/16 Weight 10 lbs (4.5kg) Operating Temperature F (0-40 C) *Per tests performed at TOTO Lab. These dimensions and specifications are subject to change without notice. For handicapped installation, refer to codes. Recess mounting will be required so that the front surface is not mare than 4" (102mm) from finished wall. Maximum height of air blower outlet from finished floor is 47-1/4" (1200mm) to comply with ADA Guidelines, ANSI A117.1 and CSA B651 requirements. WIRING DIAGRAM ROUGH-IN Sensor Power Connector B W P1-1 W P6 P5 P4 W Bu R Power Fuse Motor P1-2 P3 B Power Switch P7 W B W Control Assembly P2 B=BLACK R=RED W=WHITE Bu=BLUE G=GREEN Motor 3 HOLE BRACKET DIA. 5/32 (4mm) 7-13/16 (199mm) 9-7/16 (240mm) 10-3/8 (263mm) 3-1/16 (77mm) 2-1/4 (57mm) ELECTRICAL INLET 7/8 (22mm) DIA. HOLE 7-1/8 (180mm) 8-7/8 (224mm) 9-5/8 (245mm) 2-1/4 (57mm) DIA. MOUNTING HOLES (4) 5/32 (4mm) 6-11/16 (170mm) 9.5/8 (245mm) 6-5/16 (162mm) 18-1/2 (470mm) TOP COVER ASSY UNIT* 9-5/8 (245mm) 18-1/2 (470mm) * 6-5/16 (162mm) #Recommended mounting bracket heights from floor are as follow: -Male/Female: 53 (1346 mm) -Children: 47 (1194 mm) -Handicapped: 45 (1143 mm) 5/8 (16mm) 7-13/16 (199mm) Ø4.5X30 (mm) SCREW POWER CABEL (HARDWIRING) G 18-1/2 (470mm) CLEARANCE FOR DRAIN TRAY** DRAIN TRAY ASSY* DRAIN TRAY 6-5/16 (160mm) 7 (177mm) 4-5/16 (110mm) FINISHED *Top Cover Assy Unit and Drain Tray Assy are two separate parts. WALL **Clearance is required in order to take off the tray for cleaning and maintenance. 9-7/16 (240mm) 3-15/16 (100mm) Ø4.5X30 (mm) SCREW Ø4.5X30 (mm) SCREW 5/8 (16mm) FLOOR These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) # SS-00381, v.03 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

HDR110#SS Sensor Activated Clean Dry High Speed Concealed Hand Dryer FEATURES AC powered hand dryer, equipped with very fast and quiet motor providing 224 mph air speed with only 62 db noise rating

153 HDR110#SS Sensor Activated Clean Dry High Speed Concealed Hand Dryer FEATURES AC powered hand dryer, equipped with very fast and quiet motor providing 224 mph air speed with only 62 db noise rating Takes only 12 seconds to dry hands Touch free infra red sensor activation with power saving function which turns the motor off automatically when hands are removed or after 60 seconds of use Drip tray to prevent water from trickling to the floor Hard wired Mounts flush with the wall for clean design Flush mounting deters vandalism Quality, attractive construction with stainless steel body COLORS/FINISHES #SS Stainless Steel CODES/STANDARDS Meets or exceeds UL507, CSA C22.2 #113-M1984 Certifications: Intertek/ETL Code Compliance: NEC, CEC ADA compliant PRODUCT SPECIFICATION TOTO Model No. Automatic infrared sensor activated, high speed hand dryer. 120 V AC power hardwiring required. Decibel rating of 58dB for low noise level while providing 224 mph air speedfor fast drying. Low power consumption of 510 Watts. Drain Tray to collect water from hands.

154 # # HDR110#SS Sensor Activated Clean Dry High Speed Concealed Hand Dryer SPECIFICATIONS INSTALLATION NOTES Warranty Material Power Connection Power Rating One Year Warranty Stainless Steel Hardwired 120V AC, 4.25 Amps, 60 Hz, 510 W Power Saving Function Automatically turns OFF when hands are removed or after 60 seconds of use Decibel Rating Air Speed 58dB 224 mph (100 meters/ second); 19,950 LFM (linear feet per minute) Dry Time 12 seconds* Drain Tray Capacity 0.27 gal (950 ml) Size 12-5/8 x 28-3/4 x 6-7/16 Weight 22 lbs (10 kg) Operating Temperature F (0-40 C) *Per tests performed at TOTO Lab. These dimensions and specifications are subject to change without notice. For handicapped installation, refer to codes. Maximum height of an blower outlet from finished floor is 47-1/4" (1200mm) to comply with ADA Guidelines ANSI A117.1 and CSA B651 requirements. WIRING DIAGRAM ROUGH-IN Sensor Control Assembly Power Connector Power Fuse 15A B G W P1-1 W P6 W P7 W P2 Motor P1-2 P3 B B=BLACK W=WHITE G=GREEN Motor *1-9/16 (40mm) FROM FINISHED WALL TO BRACKET HOLES 28-3/4 (730mm) 3-9/16 (90mm) FROM STUD TO BRACKET HOLE 2 X4 STUD 11-13/16 (300mm) OPEN WALL 3-1/8 (80mm) FROM STUD TO BRACKET HOLE FINISHED WALL *1-9/16 (40mm) FROM FINISHED WALL TO BRACKET HOLES 2 X4 STUD TOP COVER DRAIN TRAY 5-1/8 (130mm) COMPARTMENT SIZE 11-3/8 x 5-3/8 x 11-1/2 (289mm x 137mm x 292mm) 5-1/8 (130mm) 1-9/16 (40mm) 9-15/16 (252mm) 2 (50mm) 26-5/16 (668mm) 27-9/ /8 (700±2 mm) OPEN WALL 11-1/2 (292mm) 26-5/16 (668mm) POWER CABEL (HARDWIRING) 6-7/16 (164mm) Recommended mounting bracket heights from floor are -Male/Female: 30 (762 mm) -Children: 24 (610 mm) -Handicapped: 22 (559 mm) 12-5/8 (320mm) 1-5/16 (34mm) FINISHED WALL FINISHED FLOOR *WALL THICKNESS REQUIREMENT: MIN 3/16 in (5mm) TO MAX. 1-3/16 (30mm) These dimensions and specifications are subject to change without notice Ph: (888) Fax: (800) # SS-00427, v.02 Printed in U.S.A. TOTO USA 10/09 Printed on recycled paper

155 FBY1500P Enameled Cast Iron Bathtub FEATURES 60-3/8" x 36-1/4" x 22-1/4" Elegant, deep soaking design Cast iron construction provides years of durability Slip-resistant surface Stainless steel grab bars COLORS/FINISHES Shell Color #01 Cotton #12 Sedona Beige CODES/STANDARDS Meets and exceeds ASME A /CSA B45.2 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others PRODUCT SPECIFICATION The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1500P.

156 FBY1500P Enameled Cast Iron Bathtub SPECIFICATIONS Size 60-3/8"L x 36-1/4"W Depth 22-1/4" Warranty Lifetime Limited Warranty Material Enameled Cast Iron Shipping Weight 353 lbs. Shipping Dimensions 76-15/16"L x 40-3/8"W x 23-5/8"H INSTALLATION NOTES A frame cutout guide is available for drop-in installation. A template is available for under mount installation. 3-15/16" (100mm) 60-3/8" (1533mm) 53-11/16" (1363mm) 2-3/4" (70mm) 19-5/8" (500mm) 18-1/8" (460mm) 2-3/16" (55mm) 36-1/4" (920mm) 18-1/8" (460mm) 8-1/4" (210mm) 19-11/16" (500mm) 22-1/4" (565mm) DIA 2-3/8" (60mm) 2-3/4" (70mm) 30-11/16" (780mm) 12-7/8" (327mm) 8-1/4" (210mm) 8-1/4" (210mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS-00312, v.02 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

FBY1515 Enameled Cast Iron Bathtub FEATURES 59-3/4" x 30" x 14-11/16" Apron front Cast-iron construction provides years of durability Slip-resistant surface COLORS/FINISHES Shell Color #01 Cotton #12

157 FBY1515 Enameled Cast Iron Bathtub FEATURES 59-3/4" x 30" x 14-11/16" Apron front Cast-iron construction provides years of durability Slip-resistant surface COLORS/FINISHES Shell Color #01 Cotton #12 Sedona Beige MODELS FBY1515LP Left hand drain FBY1515RP Right hand drain PRODUCT SPECIFICATION The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1515. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.2 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others

158 FBY1515 Enameled Cast Iron Bathtub SPECIFICATIONS Size 59-3/4"L x 30"W Depth 14-11/16" Warranty Lifetime Limited Warranty Material Enameled Cast Iron Shipping Weight lbs. Shipping Dimensions 62-5/8"L x 32-7/8"W x 18-1/2"H 59-3/4" (1517mm) 2-3/8" (60mm) 2-3/8" (60mm) 55" (1397mm) 2-3/8" (60mm) 24-5/8" (626mm) 14-11/16" (373mm) 30" (762mm) 2-3/16" (55mm) 15-5/16" (389mm) 3" (76mm) 7-7/8" (200mm) 5/16" (8mm) 7-7/8" (200mm) 14-3/8" (365mm) 13-1/4" (337mm) DIA 2-3/8" (60 mm) 2-3/4" (70mm) 1/8" (3.5mm) 31-1/2" (800mm) 12-7/8" (327mm) 1/8" (3.5mm) 8-11/16" (220mm) 8-11/16" (220mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS-00423, v.02 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

FBY1525 Enameled Cast Iron Bathtub FEATURES 59-3/4" x 32" x 16-3/4" Cast-iron construction provides years of durability Slip-resistant surface Apron front Tile-in flanges on 3 sides COLORS/FINISHES

159 FBY1525 Enameled Cast Iron Bathtub FEATURES 59-3/4" x 32" x 16-3/4" Cast-iron construction provides years of durability Slip-resistant surface Apron front Tile-in flanges on 3 sides COLORS/FINISHES Shell Color #01 Cotton #12 Sedona Beige MODELS FBY1525LP Left hand drain FBY1525RP Right hand drain PRODUCT SPECIFICATION The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1525. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.2 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others

160 FBY1525 Enameled Cast Iron Bathtub SPECIFICATIONS Size 59-3/4"L x 32"W Depth 16-3/4" Warranty Lifetime Limited Warranty Material Enameled Cast Iron Shipping Weight 397 lbs. Shipping Dimensions 62-5/8"L x 34-13/16"W x 20-1/4"H 2-15/16" (75mm) 59-3/4" (1517mm) 53-1/16" (1347mm) 2-3/4" (70mm) 16" (406mm) 26-1/8" (663mm) ø2-3/16" (ø55mm) 32" (813mm) 3/8" (10mm) 7 7/8" (200mm) 2-3/4" (70mm) 16-5/16" (415mm) 15-1/4" (387mm) 16-3/4" (425mm) ø2-3/8" (ø60mm) 3/16" (4mm) 30-1/2" (774mm) 3/16 (4mm) 3/8" (10mm) 12-7/8" (327mm) 8-3/8" (212mm) 8-3/8" (213mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS-00313, v.04 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

FBY1550P Enameled Cast Iron Bathtub FEATURES 59-1/16" x 31-1/2" x 23-1/4" Elegant, drop in styling Cast-iron construction provides years of durability Slip-resistant surface COLORS/FINISHES Shell

161 FBY1550P Enameled Cast Iron Bathtub FEATURES 59-1/16" x 31-1/2" x 23-1/4" Elegant, drop in styling Cast-iron construction provides years of durability Slip-resistant surface COLORS/FINISHES Shell Color #01 Cotton #12 Sedona Beige CODES/STANDARDS Meets and exceeds ASME A /CSA B45.2 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others PRODUCT SPECIFICATION The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1550P.

162 FBY1550P Enameled Cast Iron Bathtub SPECIFICATIONS Size 59-1/16"L x 31-1/2"W Depth 23-1/4" Warranty Lifetime Limited Warranty Material Enameled Cast Iron Shipping Weight 346 lbs. Shipping Dimensions 63-3/8"L x 35-13/16"W x 28-5/16"H INSTALLATION NOTES A frame cutout guide is available for drop-in installation. A template is available for under mount installation. 2-3/4" (70mm) 59-1/16" (1500mm) B 3-3/8" (85mm) ø2-3/16" (ø55mm) 2-9/16" (65mm) 31-1/2" (800mm) B 8-7/16" (215mm) 2-3/4" (70mm) ø2-3/8" B-B (ø60mm) 19-11/16" (500mm) 23-1/4" (590mm) 34-7/16" (875mm) 13" (330mm) 10" (255mm) 10" (255mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice # SS-00410, v.01 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

FBY1700P Enameled Cast Iron Bathtub FEATURES 66" x 32" x 18-5/16" Luxurious, deep soaking drop in design Cast-iron construction provides years of durability Slip-resistant surface COLORS/FINISHES

163 FBY1700P Enameled Cast Iron Bathtub FEATURES 66" x 32" x 18-5/16" Luxurious, deep soaking drop in design Cast-iron construction provides years of durability Slip-resistant surface COLORS/FINISHES Shell Color #01 Cotton #12 Sedona Beige CODES/STANDARDS Meets and exceeds ASME A /CSA B45.2 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others PRODUCT SPECIFICATION The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1700P.

164 FBY1700P Enameled Cast Iron Bathtub SPECIFICATIONS Size 66"L x 32"W Depth 18-5/16" Warranty Lifetime Limited Warranty Material Enameled Cast Iron Shipping Weight 309 lbs. Shipping Dimensions 70-1/16"L x 36-5/16"W x 23-13/16"H INSTALLATION NOTES A frame cutout guide is available for drop-in installation. A template is available for under mount installation. 2-3/16" (55mm) 66" (1676mm) 59-1/16" (1500mm) 3" (76mm) ø2-3/16" (ø55mm) 27-11/16" (703mm) 16" (406.5mm) 32" (813mm) 8-1/2" (216mm) 13/16" (20mm) ø2-3/8" (ø60mm) 2-3/4" (70mm) 17-1/2" (445mm) 16-15/16" (430mm) 33-7/16" (850mm) 13" (330mm) 9-1/4" (235mm) 9-1/4" (235mm) Ph: (888) Fax: (800) These dimensions and specifications are subject to change without notice #SS-00314, v.02 Printed in U.S.A. TOTO LTD. 07/09 Printed on recycled paper

FBY1715 Enameled Cast Iron Bathtub FEATURES 65-3/4" x 32" x 16-3/4" Apron front Cast-iron construction provides years of durability Slip-resistant surface Tile-in flanges on 3 sides COLORS/FINISHES

165 FBY1715 Enameled Cast Iron Bathtub FEATURES 65-3/4" x 32" x 16-3/4" Apron front Cast-iron construction provides years of durability Slip-resistant surface Tile-in flanges on 3 sides COLORS/FINISHES Shell Color #01 Cotton #12 Sedona Beige MODELS FBY1715LP Left hand drain FBY1715RP Right hand drain PRODUCT SPECIFICATION The Enameled Cast Iron Bathtub construction shall prove the ultimate in strength and durability, while a slip-resistant surface enhances safety in the bath. Cast Iron Bathtub shall be TOTO Model FBY1715. CODES/STANDARDS Meets and exceeds ASME A /CSA B45.2 Certifications: IAPMO(cUPC), State of Massachusetts, City of Los Angeles and others Code Compliance: UPC, IPC, NSPC, NPC Canada, and others

MS950CG Neorest 500 Elongated Toilet/Bidet

MS950CG Neorest 500 Elongated Toilet/Bidet FEATURES Cyclone siphon jet flushing system, low consumption (1.2GPF/4.5LPF and 1.6GPF/6.0LPF) SanaGloss ceramic glaze - SanaGloss glaze prevents debris, and