Underfloor distributors

Transcription

1 YOUR WISHES ARE OUR BENCHMARK Underfloor distributors Catalogue 02

2 Table of Contents PIAZZA Introduction Overview PIAZZA PIAZZA 540 PIAZZA 700 PIAZZA 1000 Pages 4-7 Page 3 Page 4 Page 5 Page 6 Page 7 PIAZZA Practical examples Installation instructions Pages 8-11 Pages 8-10 Page 11 CAMPETTO Overview CAMPETTO CAMPETTO V CAMPETTO VI CAMPETTO VII CAMPETTO VIII Pages Page 12 Page 13 Page 14 Page 15 Page 16 CAMPETTO Practical examples Installation instructions Pages Pages Page 20 PICCOLINO / RETRANT PICCOLINO RETRANT Practical examples Pages Page 21 Page 22 Page 23 2 GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

3 Introduction Underfloor distributors virtually invisible - always within reach The structure of an underfloor distributor Thanks to our underfloor distributors, electrical power is quickly available anywhere and without time-consuming installation work! As with all of our products, we attach great importance to high-quality components and manufacturing. Only solid rubber distributors made in-house, with their outstanding material properties, are used. The benefits for you Power available at any time and quickly Ready for use immediately Can be walked or driven over during operation No power cables lying around, no danger of tripping Covers can be individually filled / paved Lockable in the contacted area Gas springs for force-free, automatic opening Frost-proof operation thanks to cover heating Flooding-resistant on request Maintenance-free solid rubber distributor system for electricity, water, compressed air and data connections, fittings as per the client's wishes Our services Personalised, professional advice, including on site Tried-and-tested product range Tailored, customised solutions Production of single and large series Long spare parts availability Cable opening (for closed operation) Flexible connecting cable Electric supply line Outlet for drainage Built in accordance with: BGA V1 and BGA V3 VDE 0100 Part 410 and 540 VDE 0660 Part 500 VDE 0660 Part depending on design VDE 0471 Power distributor Gas spring Connecting set Earthing plugs The right choice The following questions need to be answered in order to choose the right underfloor distributor: 1. What power connections are wanted? The size of the solid rubber distributor is defined by the socket occupancy and type of fuses used. The distributor is mounted on the cover of the underfloor distributor. The size of the power distribution also defines the junction box. We will be happy to provide more detailed information and explanations. 2. Where will the underfloor distributor be installed? Information regarding internal or external installation, along with how it will be used, is useful for ensuring the best possible design. 3. Does the underfloor distributor need to be able to withstand traffic? Your underfloor distributor is designed specifically for your needs. The higher the weight, the stronger the underfloor distributor and the foundations need to be. 4. Do you want the cover to be filled? If your underfloor distributor is to blend in perfectly with its surroundings, filling of the cover is required. There are no restrictions on the type of filling that can be used (cobbles, wood, tar, etc.). 5. Is drainage guaranteed? In order to protect the underfloor distributor from water damage, drainage must be guaranteed through the preparation of appropriate drainage (this is always the client's responsibility). Telephone Fax verkauf@gifas.de 3

4 PIAZZA Overview of PIAZZA 540 / 700 / 1000 PIAZZA 540 PIAZZA 700 PIAZZA 1000 Product features Sturdy, easy to use and safe in operation Can be walked or driven over even during operation Integrates perfectly into its surroundings thanks to customisable filling options Secured against unauthorised opening (vandal-proof) and lockable in the contacted area Easy and quick opening and closing, supported by gas springs Frost-proof operation thanks to cover heating The GIFAS solid rubber distributor guarantees optimum operating safety down to -40 C. No formation of condensation thanks to the GIFAS solid rubber distributor Resistant to environmental influences Stainless steel construction, all metal parts made from V2A with cathodic dip coating Visible reflectors on the opened cover system Distributor fastening on the underside of the cover The connector distributor can be accessed when installed (E-check) Pit cover, lock and distributor can be replaced Technical data PIAZZA 540 PIAZZA 700 PIAZZA 1000 Area of use Internal / external area Internal / external area Internal / external area Classification as per EN kN (40t) / D kN (40t) / D kN (40t) / D400 Cover Covers can be individually filled / paved 580x580x70mm Covers can be individually filled / paved 700x700x70mm Covers can be individually filled / paved 1000x1000x70mm Weight Approx. 350kg Approx. 450kg Approx. 780kg Installation depth Approx. 1200mm Approx. 1300mm Approx. 1300mm GIFAS solid rubber distributors 3800 series 7800 series 7800/7900 series Can be equipped in accordance with the client's wishes (power, water, waste water, compressed air and EDP connections) Fuses 1 CEE built-in socket 5x16A/400V 2 protective contact sockets 1 RCCB 40/0.03A 1 LP 16A / 3-pin 2 LP 16A / 1-pin 1 CEE built-in socket 5x63A /400V 1 CEE built-in socket 5x32A/400V 1 CEE built-in socket 5x16A/400V 3 protective contact sockets 1 LP 63A / 3-pin 1 LP 32A / 3-pin 1 LP 16A / 3-pin 3 LP 16A / 1-pin 1 LP 63A / 3-pin pre-fusing 1 RCCB 63/0.03A / 4-pin for 63A socket 1 RCCB 63/0.03A/ 4-pin for the remaining sockets 1 CEE built-in socket 5x63A/400V 1 CEE built-in socket 5x32A/400V 3 CEE built-in socket 5x16A/400V 6 protective contact sockets 1 LP 63A / 3-pin 1 LP 32A / 3-pin 3 LP 16A / 3-pin 6 LP 16A / 1-pin 1RCCB 63/0.03A for 63A built-in socket 1RCCB 63/0.03A for 16A built-in sockets 1 RCCB 63/0.03A for 32A builtin socket and protective contact sockets 4 GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

5 PIAZZA PIAZZA 540 Solid stainless steel construction (V2A) 540 x 540 mm, load capacity up to 400 kn, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request. Technical additions Cover filling: Cable exit flap: Locking: Heating: The pit with a depth of 70 mm can be custom-filled to blend in with its surroundings. (180x130 mm) integrated into the shaft cover frame. a self-cleaning lock with snap fastener closes the shaft cover. Cable exit flap secured with a double bit lock (locking tool included in scope of delivery). the shaft cover contains a selfregulating heating strip which helps to ensure easy opening in the event of frost. It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water. Supplied package Stainless steel construction with fillable shaft cover solid rubber electrical distributor junction box Fully assembled and wired. Mounted on concrete ring (H = 470 mm, NW = 600 mm). Telephone Fax verkauf@gifas.de 5

6 PIAZZA PIAZZA 700 Solid stainless steel construction (V2A) 700 x 700 mm, load capacity up to 400 kn, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request. Technical additions Cover filling: Cable exit flap: Locking: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings. (180x130 mm) integrated into the shaft cover frame. A sturdy closing mechanism (with snap lock) closes the shaft cover and it can also be secured with a shackle lock. Cable exit flap secured with a double bit lock (locking tool included in scope of delivery). A self-regulating heating strip is integrated Heating: into the shaft cover in order to ensure easy opening in the event of frost. It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water. Supplied package Stainless steel construction with fillable shaft cover solid rubber electrical distributor junction box Fully assembled and wired. Mounted on concrete ring (H = 470 mm, NW = 800 mm). 6 GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

7 PIAZZA PIAZZA 1000 Solid stainless steel construction (V2A) 1000 x 1000 mm, load capacity up to 400 kn, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request. Technical additions Cover filling: Cable exit flap: Locking: The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings. (180x130 mm) integrated into the shaft cover frame. A sturdy closing mechanism (with snap lock) closes the shaft cover and it can also be secured with a shackle lock. Cable exit flap secured with a double bit lock (locking tool included in scope of delivery). A self-regulating heating strip is integrated Heating: into the shaft cover in order to ensure easy opening in the event of frost. It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water. Supplied package Stainless steel construction with fillable shaft cover solid rubber electrical distributor junction box Fully assembled and wired. Mounted on concrete ring (H = 470 mm, NW = 1000 mm). Telephone Fax verkauf@gifas.de 7

8 Practical examples PIAZZA Lübeck town hall market, PIAZZA with payment system Lübeck town hall market, PIAZZA with payment system Lübeck town hall market, PIAZZA with payment system Detmold marketplace, PIAZZA 1000 Detmold marketplace, PIAZZA 1000 Detmold marketplace, PIAZZA GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

9 Practical examples PIAZZA Hangar, PIAZZA 700 Hangar, PIAZZA 700 Thyssen, PIAZZA 700 Thyssen, PIAZZA 700 Wiesbaden Assembly Rooms, PIAZZA Wiesbaden Assembly Rooms, PIAZZA Telephone Fax

10 Practical examples PIAZZA Airport PIAZZA 2000 Airport PIAZZA 2000 Munich Residence, PIAZZA 700 Munich Residence, PIAZZA 700 Dresden "Zwinger", PIAZZA 700 Dresden "Zwinger", PIAZZA GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

11 Installation instructions PIAZZA installation and assembly procedure Excavating the installation pit Customer-side concrete ring Insertion of the unit Insertion of the entire unit into the prepared installation pit Levelling Decanting and concreting-in Adaptation to the surroundings with filler material Fully installed PIAZZA With underfloor systems involving fresh water, the terminal distributor must be hung on the side opposite the water tap! Telephone Fax

12 CAMPETTO Overview of CAMPETTO V / VI / VII / VIII Product features Sturdy, easy to use and safe in operation Can be walked or driven over even during operation Integrates perfectly into its surroundings thanks to customisable filling options Secured against unauthorised opening (vandal-proof) and lockable in the contacted area Easy and quick opening and closing, supported by gas springs Frost-proof operation thanks to cover heating option The GIFAS solid rubber distributor guarantees optimum operating Safety down to -40 C. No formation of condensation thanks to the GIFAS solid rubber distributor Resistant to environmental influences Stainless steel construction, all metal parts made from V2A with cathodic dip coating Visible reflectors on the opened cover system Cover pit can be removed by loosening the screws for maintenance purposes Distributor fastening on the underside of the cover The connector distributor can be accessed when installed (E-check) Pit cover, lock and distributor can be replaced Technical data CAMPETTO V CAMPETTO VI CAMPETTO VII CAMPETTO VIII Area of use Internal / external area Internal / external area Internal / external area Internal / external area Maximum load Classification as per EN 124 Cover Up to 30kN (3t), special designs 50kN 125kN (12.5t) Up to 30kN (3t) Special designs 50kN 125kN (12.5t) 15kN (1.5t) / A15 125kN (12.5t) / B125 15kN (1.5t) / A15 125kN (12.5t) / B125 Stainless steel non-slip steel floor plate, can be supplied in two sizes 628x435mm / 778x535mm Covers can be individually filled / paved can be supplied in two sizes 628x435mm / 778x535mm Stainless steel non-slip steel floor plate 880x992mm Covers can be individually filled / paved 880x992mm Weight Approx. 60kg Approx. 70kg Approx. 250kg Approx. 250kg Installation depth Dependent on design Dependent on design 1000mm 1000mm 500 or 670mm 500 or 670mm GIFAS solid rubber distributors Can be equipped in accordance with the client's wishes (power, water, waste water, compressed air and EDP connections) Fuses Individual series 7200 to CEE built-in socket 5x32A/400V 1 CEE built-in socket 5x16A/400V 3 protective contact sockets 1 LP 32A / 3-pin 1 LP 16A / 3-pin 3 LP 16A / 1-pin 1 LP 63A / 3-pin for prefusing 1 RCCB 63/0.03 A / 4-pin for all sockets Individual series 7200 to CEE built-in socket 5x32A/400V 1 CEE built-in socket 5x16A/400V 3 protective contact sockets 1 LP 32A / 3-pin 1 LP 16A / 3-pin 3 LP 16A / 1-pin 1 LP 63A / 3-pin for prefusing 1 RCCB 63/0.03A / 4-pin for all sockets Individual series 7200 to CEE built-in socket 5x63A/400V 1 CEE built-in socket 5x32A/400V 3 CEE built-in socket 5x16A/400V 6 protective contact sockets 1 LP 63A / 3-pin 1 LP 32A / 3-pin 3 LP 16A / 3-pin 6 LP 16A / 1-pin 1 RCCB 63/0.03A for 63A built-in socket 1 RCCB 63/0.03A for 16A built-in socket 1 RCCB 63/0.03A for 32A built-in socket protective contact sockets Individual series 7200 to CEE built-in socket 5x63A/400V 1 CEE built-in socket 5x32A/400V 3 CEE built-in socket 5x16A/400V 6 protective contact sockets 1 LP 63A / 3-pin 1 LP 32A / 3-pin 3 LP 16A / 3-pin 6 LP 16A / 1-pin 1 RCCB 63/0.03A for 63A built-in socket 1 RCCB 63/0.03A for 16A built-in socket 1 RCCB 63/0.03A for 32A built-in socket protective contact sockets 12 GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

13 CAMPETTO CAMPETTO V Solid stainless steel construction (V2A) in two sizes, load capacity up to 30 kn (special design up to 50 kn), gas springs for fully automatic opening, shaft cover made from non-slip steel floor plate, distributor as per the client's request. Technical additions Cover: Cable exit flap: Locking: Heating (optional): V2A non-slip steel floor plate (135x90 mm) in the centre on the head side of the cover. a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost. Sand Gravel Pavement Concrete collar for distributors It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water. Supplied package Stainless steel construction with cover made from V2A non-slip steel floor plate solid rubber electrical distributor junction box Fully assembled and wired. Sand Gravel Pavement Concrete collar for distributors Telephone Fax verkauf@gifas.de 13

14 CAMPETTO CAMPETTO VI Solid stainless steel construction (V2A) in two sizes, load capacity up to 125 kn, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request. Pavement Technical additions Sand Cover filling: Cable exit flap: Locking: Heating (optional): The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings. (135x90 mm) in the centre on the head side of the cover. a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost. Gravel Concrete collar for distributors It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water. Supplied package Stainless steel construction with fillable shaft cover solid rubber electrical distributor junction box Fully assembled and wired. Sand Gravel Pavement Concrete collar for distributors GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

15 CAMPETTO CAMPETTO VII 992 Solid stainless steel construction (V2A), load capacity up to 15 kn (special design up to 50 kn), gas springs for fully automatic opening, shaft cover made from non-slip steel floor plate, distributor as per the client's request. Technical additions Cover: Cable exit flap: Locking: Heating (optional): V2A non-slip steel floor plate (135x90 mm) in the centre on the head side of the cover a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost. Sand Sand Gravel Kies Pavement Bepflasterung Concrete collar Betonmanschette It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water. 940 for distributors Supplied package Stainless steel construction with cover made from V2A non-slip steel floor plate solid rubber electrical distributor junction box Fully assembled and wired. Telephone Fax verkauf@gifas.de 15

16 CAMPETTO CAMPETTO VIII 992 Solid stainless steel construction (V2A), load capacity up to 125 kn, gas springs for fully automatic opening, shaft cover can be custom-filled, distributor as per the client's request. Technical additions Cover filling: Cable exit flap: Locking: Heating (optional): The pit with a depth of 70 mm can be custom-filled to blend in with its surround ings. (280x90 mm) in the centre on the head side of the cover. a self-cleaning lock with snap fastener closes the shaft cover (locking tool includ ed in the scope of delivery). the shaft contains a self-regulating heat ing strip which ensures easy opening in the event of frost. Sand Gravel Kies Pavement Bepflasterung Concrete Betonmanschette collar It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water. 940 for distributors Supplied package Stainless steel construction with fillable shaft cover solid rubber electrical distributor junction box Fully assembled and wired. 16 GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

17 Practical examples CAMPETTO Bad Saarow station, CAMPETTO VI Bad Saarow station, CAMPETTO VI BUGA Koblenz, CAMPETTO with diving bell BUGA Koblenz, CAMPETTO with diving bell London Olympic Games, CAMPETTO Melitta Minden, CAMPETTO VI Telephone Fax

18 Practical examples CAMPETTO Meckenbeuren church square, CAMPETTO VI Meckenbeuren church square, CAMPETTO VI Daimler presentation hall, CAMPETTO VI Daimler presentation hall, CAMPETTO VI Hotel Grand Spa Resort Sylt, CAMPETTO VI Hotel Grand Spa Resort Sylt, CAMPETTO VI 18 GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

19 Practical examples CAMPETTO Max Planck Institute, CAMPETTO VIII Hamburg CruiseCenter, CAMPETTO VIII Town of Illertissen, CAMPETTO VI Pforzheim marketplace, CAMPETTO VI Hampton Court Palace, CAMPETTO VI BUGA Schwerin, CAMPETTO V Telephone Fax verkauf@gifas.de 19

20 Installation instructions CAMPETTO installation and assembly procedure Excavating the installation pit Topping up the installation pit Insertion of the unit Filling Decanting and concreting-in Adaptation to the surroundings with filler material Fully installed CAMPETTO 20 GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

21 PICCOLINO PICCOLINO 120 / 200 PICCOLINO 120 PICCOLINO 200 Product features Solid stainless steel construction, rust-free Completely maintenance-free (E-check) Cover made from non-slip steel floor plate Easy operation Can be walked or driven over during operation Ground-flush installation Excellent operating safety thanks to reclosing after commissioning Locking is performed using a countersunk, cover-flush dual bit lock (1 key included in the scope of delivery) Cable exit opening in the cover lid for cables up to d = 15 mm (PICCOLINO 120), d = 25 mm (PICCOLINO 200) It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water. Technical data PICCOLINO 120 PICCOLINO 200 Area of use Underfloor distributors for restricted spaces Underfloor distributors for restricted spaces Classification as per EN 124 2kN (200kg) 250kN (25 t) / C250 Cover Stainless steel non-slip steel floor plate 120x120mm Weight Approx. 4.2kg Approx. 7.5kg Installation depth Approx. 400mm Approx. 400mm Equipment options 2m GIFAS-PROFLEXX-07 cable 3x2.5 m 2 1 protective contact coupling 16A/230V (IP 68) or 1 CEE coupling 16A/400V (IP67) Stainless steel non-slip steel floor plate 200x200mm 2m GIFAS-PROFLEXX-07 cable 3x2.5 m 2 1 protective contact coupling 16A/230V (IP 68) or 1 CEE coupling 5x16A/400V (IP 67) or 1 CEE coupling 5x32A/400V (IP 67) Twist protection Twist protection Potential Earth cross slot screw Potential Earth cross slot screw Schuko-socket WD 230V 16A holder socket 2m GIFAS PROFLEXX 3x2,5 (connection and shrinking need to be executed at contruction side) Potential Earth M8 bolt 2m GIFAS PROFLEXX 3x2,5 (connection and shrinking need to be executed at contruction side) cable exit square sash fastener cable exit square sash fastener PICCOLINO 120 PICCOLINO 200 Telephone Fax verkauf@gifas.de 21

22 RETRANT RETRANT Product features Solid stainless steel construction, rust-free Completely maintenance-free (E-check) Cover made from non-slip steel floor plate Easy operation Can be walked or driven over during operation Ground-flush installation Excellent safety thanks to the GIFAS double pressure method; the cover is held securely closed even without a lock Locking is performed using a countersunk, cover-flush dual bit lock (1 key included in the scope of delivery) Cable exit for cables is located in the shaft cover It is the client's responsibility to ensure the standards-appropriate substructure, correct installation of the shaft and corresponding drainage. The shaft cover is not sealed against surface water. Technical data RETRANT Area of use Classification as per EN 124 Underfloor distributors for restricted spaces 15kN (1.5t) / A15 Cover Stainless steel non-slip steel floor plate 340x240mm Weight Approx. 25kg Installation depth Approx. 420mm GIFAS solid rubber distributors Series 2516, protection category IP 65 Equipment options Individual as per the client's wishes 1 CEE built-in socket 5x32A/400V in straight design 1 protective contact socket 230V (IP 68) Cable input Stainless steel cover Cable outlet 50 x 50 mm Solid rubber casing type 2516 Lower part steel casing, coated against corrosion 22 GIFAS ELECTRIC GmbH Borsigstrasse Neuss GERMANY

23 Practical examples PICCOLINO / RETRANT PICCOLINO 200 RETRANT, Wiesbaden Assembly Rooms RETRANT, Wiesbaden Assembly Rooms RETRANT, Wiesbaden Assembly Rooms RETRANT, Lübeck town hall market RETRANT, Lübeck town hall market Telephone Fax verkauf@gifas.de 23

24 CONTACT US TODAY Technical modifications reserved 02/2013 New products and specialist solutions, along with the latest product catalogue, can be found on our website. GIFAS ELECTRIC GmbH Borsigstrasse 9, Neuss PO Box , Neuss GERMANY Phone Fax: