Item #: Qty #: Model #: Project #:

Transcription

1 STAINLESS STEEL HAND SINKS SPECIAL PURPOSE Keyhole Bracket for easier installation and greater stability. Item #: Qty #: Model #: Project #: 7-PS-55 7-PS-72 7-PS-64 FEATURES: One piece Deep Drawn sink bowl design. Sink bowl is 10" x 14" x 5". All sink bowls have a large liberal radii with a minimum dimension of 2" and are rectangular in design for increased capacity. Keyhole wall mount bracket. Stainless steel basket drain 1-1/2" IPS. Splash mounted 4" O.C. gooseneck faucet furnished with aerator. Specific Features: 7-PS-55 features eye wash faucet attachment. 7-PS-64 features tubular support brackets. 7-PS-72 is H.A.C.C.P. compliant hand sink featuring slow, self-closing, metering faucet with mixing valve. 7-PS-727 Unit totally enclosed. Bottom security panel provides access for installation and services. Vandal Proof Aerators. All fasteners are stainless steel tamper proof. Concealed drain. Heavy duty gooseneck faucet. Towel dispenser with hinged towel box with lock. Unit uses standard C-fold towels. Liquid Soap dispenser. 7-PS-747 Unit totally enclosed. Bottom security panel provides access for installation and services. Vandal Proof Aerators. All fasteners are stainless steel tamper proof. Concealed drain. Heavy duty gooseneck faucet. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. Die formed Countertop Edge with a 3/8" No-Drip offset. One sheet of stainless steel - No Seams. MATERIAL: Heavy gauge type 304 series stainless steel. Wall mounting bracket is galvanized and of offset design. All fittings are brass / chrome plated unless otherwise indicated. MECHANICAL: Faucet supply is 1/2" IPS male thread hot and cold. 7-PS-727 CLASS 1 SECURITY INSTALLATION 7-PS-747 CLASS 2 SECURITY INSTALLATION Standard Faucet conforms to NSF 61 Standard 9. An optional faucet upgrade is required for compliance to AB 1953 Standards. For Replacement Faucets & Upgrades, Drains & Accessories visit our website at Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) B-6

2 DIMENSIONS and SPECIFICATIONS TOL Overall: ±.500" Interior: ±.250" FITTINGS SUPPLIED AS SHOWN ALL DIMENSIONS ARE TYPICAL 7-PS-64 2" 17 1/4" 7-PS /4" C L 8 5/8" 15 1/4" 10" 2" 17 1/4" 10" 14" Faucet 14" 8" Metered Faucet 25 lbs. 5" 2" 10 1/2" 13" 8" 5" 2" 1 1/2" 15 lbs. 11 1/8" 7-PS /4" 2" EYE WASH DETAIL 15 1/4" 10" 14" Faucet Eye Wash Attachment 13" 8" 5" 2" 15 lbs. 7-PS /4" 14" Mounting Detail 2" 15 1/4" 10" Faucet Security Skirt Enclosure 23 1/2" 15 7/8" 5" 2" 37" 45 lbs. P-Trap 7-PS-727 Unit with Towel Dispenser B-6a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, JULY 2009

3 STAINLESS STEEL POT RACKS CEILING MOUNTED Item #: Qty #: Model #: Project #: WALL MOUNTED SHELF with POT RACK Ceiling Mounted POWDER # of L S/S COATED Hooks Wt SC-36 SC-48 SC-60 SC-72 SC-84 SC-96 SC-108 SC-120 SC-132 SC GC-36 GC-48 GC-60 GC-72 GC-84 GC-96 GC-108 GC-120 GC-132 GC PS PS PS PS PS PS PS PS PS PS lbs. 26 lbs. 29 lbs. 32 lbs. 36 lbs. 44 lbs. 48 lbs. 51 lbs. 55 lbs. 58 lbs. Shelf with Pot Rack PS PS PS PS PS PS PS PS PS PS Wall Mounted POWDER # of L S/S COATED Hooks Wt SW-24 SW-36 SW-48 SW-60 SW-72 SW-84 SW-96 SW-108 SW-120 SW-132 SW-144 GW-24 GW-36 GW-48 GW-60 GW-72 GW-84 GW-96 GW-108 GW-120 GW-132 GW lbs. 23 lbs. 26 lbs. 29 lbs. 32 lbs. 36 lbs. 44 lbs. 48 lbs. 51 lbs. 55 lbs. 58 lbs # of L Wide Wt Wide Wt Wide Wt Hooks 20 lbs. 30 lbs. 40 lbs. 50 lbs. 60 lbs. 70 lbs. 80 lbs. 90 lbs. 100 lbs. 110 lbs. 25 lbs. 35 lbs. 45 lbs. 55 lbs. 65 lbs. 75 lbs. 85 lbs. 95 lbs. 105 lbs. 115 lbs. PS PS PS PS PS PS PS PS PS PS lbs. 40 lbs. 50 lbs. 60 lbs. 70 lbs. 80 lbs. 90 lbs. 100 lbs. 110 lbs. 120 lbs. Units 8 ft. and larger are furnished with three (3) sets of supports brackets FEATURES: (Ceiling Mounted) Ceiling suspension with chain hangers. Optional stainless steel Flat Bar in lieu of Chain available. Use TA-98. MATERIAL: Flat steel bar is 2 x 1/4, either stainless steel or powder coated (as specified). Pot hooks are plated. 24 long chain hangers are plated. CONSTRUCTION: All welded stainless steel units are blended to a satin finish. All powder coated units are coated with FDA approved material. FEATURES: (Wall Mounted) Secured to wall by means of bolts through welded brackets. (Hardware not provided) MATERIAL: Flat steel bar is 2 x 1/4, either stainless steel or powder coated (as specified). Pot hooks are plated. CONSTRUCTION: All welded stainless steel units are blended to a satin finish. All powder coated units are coated with FDA approved material. FEATURES: (Shelf/Pot Rack) A dual purpose unit for shelf and utensil storage. Secured to wall by means of bolts through welded brackets. (Hardware not provided) MATERIAL: Flat stainless steel bar is 2 x 1/4. Pot hooks are plated. Type 430 stainless steel shelf. CONSTRUCTION: All welded stainless steel units are blended to a satin finish. Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) L-10

4 TOL ±.500 DETAILS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL Ceiling Mounted Length Wall Mounted Length Shelf with Pot Rack Width A L-10a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, FEBRUARY 2010

5 STAINLESS STEEL DISHTABLE WITH 3 COMPARTMENT SINK NEW Tile Edge Design Item #: Qty #: Model #: Project #: *Bowls are located 12 in from machine. For other configurations, contact factory. Must verify machine for Control Box or Drive Unit Interference. 10-1/2 EXTRA LARGE Bold Looking Backsplash with 2 return and tile edge Deep Drawn Sinks Seamless construction for unsurpassed strength and integrity. Shown with optional K-550 Rack storage FEATURES: 3 Compartment Sinks. Tile edge for ease of installation. One piece Deep Drawn sink bowls with large liberal 3 radius. Sink bowls positioned to optimize maximum work surface area. CONSTRUCTION: All TIG welded. 14 Gauge Stainless Steel. Stainless Steel Legs and Cross Bracing. Stainless Steel Bullet Feet. Gussets welded to Stainless Steel Channels. Welded areas blended to match adjacent surfaces and to a satin finish. MECHANICAL: Faucet holes in splash punched on 8 centers. (Faucet not included) Waste drains are 1 1/2 IPS and are included. Model # Bowl Drainboard L Size Size Wt. DTC LorR* DTC LorR* DTC LorR* DTC LorR* DTC LorR* x 20 x x 20 x x 20 x x 20 x x 20 x lbs. 230 lbs. 250 lbs. 265 lbs. 400 lbs. *Bowls are located 12 in from machine. For other configurations, contact factory. Must verify machine for Control Box or Drive Unit Interference. ACCESSORIES 18 Stainless Steel Undershelf 24 Stainless Steel Undershelf 16 x 20 Prerinse Basket with Welded Slide Bar 20 x 20 Prerinse Basket with Welded Slide Bar 16 X 20 Prerinse Slide Bar 20 X 20 Prerinse Slide Bar Overhead Rack Shelves and Faucets Available. MODIFICATIONS Additional drainboard area on machine side Model # DTA-SS-18 DTA-SS-24 DTA-69 DTA-62 DTA-65 DTA-63 Model # DTA-56 per lin. ft. Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) P-8

6 DIMENSIONS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL TOL ±.500 SEE DISH MACHINE COMPATIBILITY CHART TO ENSURE PROPER FIT Dish Machine Compatibility Chart can be found on our website at under Product Support " 16" 83" " 12" Typ. 2" 95" " 16" 2 " 12" Typ. 2" 30" 20" 21 3/8" 30" 20" 21 3/8" 1" Turn Up (Tile Edge) 10 1/2" 1 1/8" Faucet Holes C L C L 8" 35 3 " 8 1" Turn Up (Tile Edge) 10 1/2" 1 1/8" Faucet Holes C L C L 8" " 12" 12" 34" " C L " L C " LC " 37" 34" " C L " L C " C L " 37" DTC L Shown DTC L Shown " 20" 95" " 12" Typ. 2" 107" " 2 " 12" 2 " Typ. 2" 30" 20" 21 3/8" 30" 20" 21 3/8" 1" Turn Up (Tile Edge) 1 1/8" Faucet Holes C L C L 8" " 1" Turn Up (Tile Edge) 1 1/8" Faucet Holes C L C L 8" " 10 1/2" 10 1/2" 12" 12" 34" " 221 " " C L C L C L " 37" 34" " 22 1 C " 2 " L C L C L " 37" DTC L Shown DTC L Shown 1 40 " 2 20" 119" " Typ. 12" 2" END VIEW 30" 20" 21 3/8" C L 3" 1" Turn Up (Tile Edge) 10 1/2" 34" 1 1/8" Faucet Holes 12" C L C L 8" " " 8 " 37" 2 1" 2 " C L C L C L DTC L Shown 37" 10" " S/S Cross Bracing LC 1 5/8" S/S Legs & Gussets 1" Adj S/S Bullet Feet P-8a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DECEMBER 2009

7 DISHTABLE SHELVING Item #: Qty #: SORTING SHELVES Model #: Project #: KD TUBULAR TRADITIONAL TRADITIONAL DESIGN FEATURES: A solid die formed wall mounted rack shelf with solid end brackets. CONSTRUCTION: TIG-welded with exposed areas blended to a satin finish. MATERIAL: Brackets are 16 gauge type 300 series stainless steel. Shelf is 16 gauge type 300 series stainless steel. MODEL # DT-6R-11 DT-6R-12 DT-6R-13 DT-6R-14 # of Racks L Wt 20 lbs. 30 lbs. 40 lbs. 50 lbs. KD TUBULAR DESIGN FEATURES: A dual purpose open tubular design wall mounted rack shelf with solid end brackets bolted in field. Unit completely knock down. CONSTRUCTION: No welds. Unit is supplied with assembly hardware. MATERIAL: Brackets are 16 gauge type 300 series stainless steel. Tubing is 1 5/8 diameter stainless steel 18 gauge tubing. Stainless steel bolts (included). MODEL # DT-6R-21 DT-6R-22 DT-6R-23 DT-6R-24 # of Racks L Wt lbs. 23 lbs. 30 lbs. 38 lbs. Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) Q-3

8 DISHTABLE SHELVING DOUBLE SIDED SLANT RACK SHELF Recommended for D, G and U-Shaped Series Dishtables Only. MODEL # DTA-79 Qty. TABLE MOUNTED TUBULAR RACK SHELF DOUBLE SIDED DESIGN Mounts to backsplash and end roll of dishtable FEATURES: A dual purpose double sided open tubular design table mounted rack shelf with solid ends. CONSTRUCTION: Factory assembled for ease of Installation. Mounts to dishtable with stainless steel bolts (included). MATERIAL: Side Plates are 14 gauge type 304 series stainless steel. Tubing is 1 5/8 diameter 18 gauge type 300 stainless steel tubing. DTA-79 Minimum Length 48 9 AND LONGER HAVE CENTER SUPPORT Shelf shipped separated from table to reduce freight costs and chance of shipping damage. Stainless Steel Undershelves FEATURES: Stainless steel construction featuring the adjustable die cast leg clamp. CONSTRUCTION: No welds. Shelf completely die formed. MATERIAL: Stainless steel. UNDERSHELVES MODEL # L Wt. DTA-SS-18 DTA-SS-24 DTA-SS-30 DTA-SS-42 DTA-SS-54 DTA-SS-66 DTA-SS lbs. 18 lbs. 24 lbs. 33 lbs. 42 lbs. 50 lbs. 60 lbs. Shelving is Reversible (Left or Right) Size Undershelf to be at least 6 shorter than dishtable. Q-3a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, MARCH 2010

9 DV 80.2 HOT WATER SANITIZING DOOR-TYPE DISH MACHINE Meiko s DV 80.2 introduces state of the art dishwashing technology with standard features and benefits currently unavailable in the door-type dishmachine market. Increased rack capacity and low water consumption not only reduce operating costs for the end user, but also provide enhanced performance and cycle flexibility. Meiko s exclusive, award-winning Mike 2 programmable controller simplifies operation and service diagnostics. Other unique features include Meiko s Active Plus wash tank soil removal system, Soft Start fine china and glassware protection system, Aqua- Stop water leakage protection system, and the Auto Safe temperature control system. Together with the unit s internal booster heater and power rinse pump, Auto Safe provides constant, guaranteed temperature and pressure for the wash and final rinse cycles. As with all products synonymous with the name Meiko, engineering excellence, manufacturing quality and performance come to the forefront in the DV Special Features: Mike 2 Programmable Controller - advanced micro-computer technology for service diagnostics and end-user dishmachine settings Built-in Booster Heater with Power Rinse Pump - Guarantees constant pressure and temperature during final rinse Double-wall construction keeps heat inside the machine, reducing energy consumption and heat loss into the dishroom environment Active Plus - Double filtration of wash water removes food soil, improving washing efficiency and saving detergent while easing cleaning chores Auto Safe - Guarantees minimum required wash and rinse temperatures regardless of incoming water temperature Soft Start Wash Pump - Protects dishes and glasses from chipping or breaking Aqua-Stop - Automatically turns off incoming water supply should internal water leakage occur Standard Features: Three variable programmed time cycles - 66, 90 and 210 seconds Maximum rack capacity of 54 racks per hour Utilizes only 1.13 gallons of rinse water per rack Fully automatic operation - automatic fill, automatic start, and automatic reset Pumped drain for both floor and wall drain applications Self cleaning cycle - automatic cleaning of the wash chamber following machine shutdown Stainless steel non-clogging wash and rinse arms Sloped ceiling is safer for the user and prevents dripping of soiled water onto sanitized ware Front mounted controls with digital cycle and temperature displays 1 Hp wash pump All 304 and 316L stainless steel construction for advanced corrosion resistance Type A air gap system eliminates need for vacuum breaker Field-convertible for use in either straight-through or corner applications DV 80.2 Updated 9-08 Meiko 1349 Heil Quaker Blvd. LaVergne, TN (800) 55-MEIKO FAX (615)

10 Dimensions Legend 18 3/4" (476mm) 9 3/16" (233mm) Electrical terminal block Strain relief provided at lower rear of machine. Adequate slack in the wiring should be provided to allow the machine to be moved for servicing. 11" (279mm) Front Elevation 6 1/2" (165mm) 25 3/16" (640mm) 34" (845mm) table lip-in height 59 3/16" (805mm) 77 15/16" (1980mm) 17 5/16" (440mm) vertical clearance Side Elevation If drain hose is positioned as a water trap, top of loop may be no higher than 24" from floor Fresh water connection 3/4" female garden hose supply connection is provided. Removal of supplied adapter provides female 3/4" NPT connection. Either connection may be used as required. Supplied hose extends 4' 7" from machine connection. Drain connection Requires indirect connection to 1-1/2" drain pipe (wall or floor). Supplied hose extends 4' 7" from machine connection. Plan View 7 9/16" (192mm) 12-9/16" (319mm) 2 3/8" (60mm) Rack Clearances and Table Positioning 2 1/2" (64mm) 20" (508mm) rack clearance 2 1/2" (64mm) 13" (330mm) 29 1/2" (750mm) 7" (178mm) 20" (508mm) rack clearance Rack centerline 17" (432mm) 2 1/2" (64mm) 12 1/2" (318mm) 1 1/4" (32mm) 5 7/8" (150mm) 1 1/4" (32mm) 25" (635mm) 27-1/2" (699mm) 2 3/4" (70mm) 12 1/2" (317mm) 12 1/2" (317mm) Rack centerline (corner installation) DV 80.2 Updated 9-08 Meiko 1349 Heil Quaker Blvd. LaVergne, TN (800) 55-MEIKO FAX (615)

11 Corner Installations The DV 80.2 is field-convertible from straight-through to corner application in minutes, without additional parts. Recommended Tabling Construction Tabling Cutout for Corner Installations 5" from front of door panel Table turndown flange 3/4" max. Backsplash FRONT OF DV /2" from top surface of table 20-1/4" recommended 24-3/4" max. No front-side cutout necessary if using standard 2" front rolled edge DV 80.2 Updated 9-08 Meiko 1349 Heil Quaker Blvd. LaVergne, TN (800) 55-MEIKO FAX (615)

12 Technical Specifications Optimum Capacity: Racks per hour Dishes per hour Glasses per hour Optimum Cycle Time (Seconds): Wash Cycle Dwell / Drain Time Rinse Cycle Total Cycle Water Requirements: Gallons per Rack Gallons per Hour Flow Pressure (psi) Incoming Waterline... 3/4 male garden hose or 3/4 male NPT Drain line Size... 3/4 OD flexible hose Required Operating Temperatures: Incoming Water (Optimum) F Wash (Minimum) F Rinse (Minimum) F Tank Capacities: Wash Tank gallons Booster Heater gallons Electrical Requirements: Wash Tank Heat... 2 x 2 kw Booster Heater... 9 kw Wash Pump... 1 HP Approximate Total Load Amps: /60/ V, V /60/ V, V 460/60/ V Dimensions: Overall (HxWxD) /16 x 25 x 29-7/8 Inside Clearance Height /16 Wall Clearance... 0 min. Machine / Shipping Details: Machine Weight lbs. Shipping Weight lbs. Shipping Size (HxWxD) x 29-5/8 x 35-1/2 Specification DV 80.2 Item Number Dishmachine shall be an NSF and ULapproved Meiko DV 80.2 hot water sanitizing door type dishmachine. Unit shall be : V / 60 Hz / 1 Ph V / 60Hz / 3 Ph 460 V / 60 Hz / 3 Ph Unit shall have front mounted microcomputer controls, a 66 second total time cycle, and utilize 1.13 gallons fresh rinse water per cycle. Dishmachine shall utilize a fresh water pumped rinse for constant rinse pressure and temperature every cycle. Unit shall have integral wash tank soil removal system to maintain clean wash water and have built-in temperature safeguards to guarantee washing and rinsing at minimum required temperatures. Wash pump shall be equipped with a smooth start feature to eliminate chipped and broken dishware. Unit shall also incorporate features to stop operation and shut off water flow to the machine should leakage occur. Machine shall have variable time cycles for heavier than normal soil loads. Auto Safe Feature The DV 80.2 guarantees that the minimum NSF temperature requirements of 150 F during the wash and 180 F during the final rinse are achieved regardless of the incoming water temperature, even if the dishmachine is installed to a cold water line. Exact rack capacity is dependent upon the incoming water temperature and on the electrical supply and Incoming Temp. 140 F 110 F 70 F 140 F 110 F 70 F Racks per Hour Dishes per Hour Glasses per Hour Note: All specifications are subject to change without notice based on Meiko s dedicated product improvement program. DV 80.2 Updated 9-08 Meiko 1349 Heil Quaker Blvd. LaVergne, TN (800) 55-MEIKO FAX (615)

13 SUPER Metroseal 3 Shelving 10.10A Item # Job Metroseal 3 is available on Super Erecta and Super Adjustable Super Erecta shelving systems. Metroseal 3 is applied using an exclusive state-of-the-art finishing and coating process that creates an attractive and corrosion-resistant finish. Metroseal 3 is enhanced with built-in Microban antimicrobial product protection, which protects the Metroseal 3 coating from bacteria, mold, mildew and fungi that cause odors, stains and product degradation. Exclusive Protection: Metro s new proprietary epoxy coating now contains Microban antimicrobial product protection. Microban protects the epoxy coating from bacteria, mold, mildew and fungi that cause odors, stains and product degradation. The storage system remains cleaner between cleanings. Attractive, Corrosion-Resistant Finish: Metroseal 3 is an attractive corrosion-resistant finish that protects the shelving against corrosive conditions found in walk-in coolers. Metro Shelving Systems: Metroseal 3 is a finish for the world s most popular shelving systems, Super Erecta and Super Adjustable Super Erecta. Both systems provide easy assembly without the use of special tools, adjustability at 1" (25mm) increments, greater air circulation and light penetration, a large selection of accessories, and the versatility to change as your storage needs change. Super Adjustable Super Erecta has the added feature of a unique patented corner release making it the easiest to adjust shelving system ever. Economical: Metroseal 3 storage shelving is an economical alternative to stainless steel, for use in environments that tend to corrode other metals. 12-Year Limited Warranty: Metroseal 3 is a corrosion-resistant finish for environments which can cause other metals to corrode. Metroseal 3 has a 12-year limited warranty against rust formation. Super Adjustable Super Erecta Super Erecta *MICROBAN and the MICROBAN symbol are registered trademarks of the Microban Products Company, Huntersville, NC. ERECTA AND SUPER ADJUSTABLE SUPER ERECTA InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA

14 10.10A Job SUPER ERECTA AND SUPER ADJUSTABLE SUPER ERECTA METROSEAL 3 SHELVING SUPER ERECTA AND SUPER ADJUSTABLE SUPER ERECTA Metroseal 3 Shelving Metroseal 3 Shelves Cat. No. Cat. No. Width Length Approx. Pkd Wt. Super Adjustable Super Erecta (in.) (mm) (in.) (mm) (lbs.) (kg) A1424NK3 1424NK A1430NK3 1430NK A1436NK3 1436NK A1442NK3 1442NK /2 4.3 A1448NK3 1448NK /2 4.7 A1460NK3 1460NK A1472NK3 1472NK A1824NK3 1824NK A1830NK3 1830NK A1836NK3 1836NK /2 4.3 A1842NK3 1842NK A1848NK3 1848NK A1854NK3 1854NK /2 6.6 A1860NK3 1860NK A1872NK3 1872NK A2124NK3 2124NK A2130NK3 2130NK A2136NK3 2136NK A2142NK3 2142NK A2148NK3 2148NK A2154NK3 2154NK A2160NK3 2160NK A2172NK3 2172NK A2424NK3 2424NK A2430NK3 2430NK A2436NK3 2436NK A2442NK3 2442NK A2448NK3 2448NK A2454NK3 2454NK A2460NK3 2460NK A2472NK3 2472NK A3036NK A3048NK A3060NK / A3072NK A3636NK A3648NK A3660NK A3672NK / SiteSelect Posts Cat. No. Height* Approx. Pkd. Wt. Metroseal 3 (in.) (mm) (lbs.) (kg) 13PK / PK / PK / PK / / PK / PK / *Height includes leveling bolt and cap. All Metro Catalog Sheets are available on our Web Site: Every Metroseal 3 shelf and post is backed by a limited 12-year warranty against surface rust formation. Super Erecta Split Sleeves Super Adjustable Wedges and Corner Release System Important: When ordering by components remember that stability decreases as the ratio of height to width increases. Units should be kept as wide and low as possible. SiteSelect Posts are grooved at 1" (25mm) increments and numbered at 2" (50mm) increments. Posts are double-grooved every 8" (203mm) for easy identification. InterMetro Industries Corporation North Washington Street, Wilkes-Barre, PA Phone: Fax: For Product Information Call: L02-010B Printed in U.S.A. Rev. 11/02 Information and specifications are subject to change without notice. Please confirm at time of order. Copyright 2002 InterMetro Industries Corp.

15 STAINLESS STEEL SERVICE & MOP SINKS Floor Mounted Item #: Qty #: Model #: Project #: 9-OP-20 FEATURES: Floor mounted unit eliminates the need of lifting heavy containers. Tile edge furnished on the rear. Bowls rectangular in design for increased capacity. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. MATERIAL: Heavy gauge type 304" series stainless steel. 9-OP-20 shown with optional faucet, hose & hanger 9-OP-40 SERVICE & MOP SINKS FEATURES: Leg mounted design. High back splash. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. MATERIAL: Heavy gauge type 304" series stainless steel. 4-OP-18 Conventional Economy 8-OP HIGH SIDE & BACK SPLASHES FOR 9-OP SERIES MOP SINKS 16 Gauge, 300 Series Stainless Steel Available with Back & Left Side, Back & Right Side or Back & Both Sides (Mounting Hardware Included) Height Above MODEL Fits Units: Finished Floor (A.F.F.) K-288LorR 9-OP OP K-290LorR 9-OP OP Splashes Available on All 3 Sides K OP OP K OP OP SERVICE & MOP SINK ACCESSORIES MOP DRAINAGE TRAY 16 Gauge, 300 Series Stainless Steel Includes Cast 1/2 Drain & Plastic Hose Wall Mounted (Hardware not Included) 2 Tray Height with 6 Rear Splash (Overall Height) Approx. MODEL L x W x H Wt. K x 4 x 6 13 lbs. FLOW RATE 9.6 GPM/ 36.3 LPM 8 O.C. K-240 SERVICE FAUCET K-16 FLOOR MOP SINK REPLACEMENT DRAIN K-242 MOP HANGER - 23 Wide UTILITY SHELF - 8 WIDE inches mm MODEL Approx Approx Wt Cubes K lbs K lbs. 2 K-244 HOSE & HANGER Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) E-4

16 TOL Overall: ±.500" Interior: ±.250" DIMENSIONS ALL DIMENSIONS ARE TYPICAL SUGGESTED INSTALLATION 9-OP-20: 16" x 20" x 6" Bowl with 10" Overall Height. 9-OP-28: 20" x 28" x 6" Bowl with 10" Overall Height. 9-OP-40: 16" x 20" x12" Bowl with 16" Overall Height. 9-OP-48: 20" x 28" x 12" Bowl with 16" Overall Height " 21" LC " C L 25" 25" 9-OP-20 9-OP " 2" IPS Pipe 33" 9-OP-28 9-OP-48 K-243 MOP DRAINAGE TRAY MOP SINK DRAIN ASSEMBLY 30" Flat Strainer Plat Interior Compression Ring 6" Exterior Thread Interior Thread 1/2" IPS Drain Rubber Gasket Fiber Washer Die Cast Nut Interior Rubber Bladder 1/4" x 1 1/2" Slotted Mounting Holes 2" 6" 13 lbs. 15" C L C L 3" 8-OP-16 CONVENTIONAL DESIGN 4-OP-18 ECONOMY DESIGN 1 1/2" IPS E-4a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, SEPTEMBER 2009

17 JOB: ITEM #: QUANTITY: DUNNAGE RACKS Dunnage Racks STATIONARY & MOBILE UNITS Stationary Units Approved for use in freezers, displays, as well as packaging and storage areas, these heavy duty all welded aluminum racks keep product organized and off of the floor. Many standard sizes are available to fit a wide variety of applications with weight capacities ranging between 2000 and 4000 pounds. Mobile Units Heavy Duty All Welded Dunnage Racks (Mobile Unit Shown WithOptional Handle) DUNNAGE RACKS Ideal for any storage application, the versatile mobile racks eliminate wasted storage space. Their sanitary all welded construction easily moves loads up to 1200 pounds with no cracks or crevices to trap dirt. Optional handle is available as well as a heavy duty caster upgrade. All New Age products have a Lifetime Guarantee against rust and corrosion as well as a ive-year Guarantee against material defects and workmanship. See our current price list for details. New Age Industrial Corp., Inc. E Hwy-36 PO Box 520 Norton, Kansas Phone#: ax#: NSF Certified 0298

18 DUNNAGE RACKS JOB: ITEM #: QUANTITY: DUNNAGE RACKS SPECI ICATIONS STATIONARY UNITS MATERIAL: High tensile extruded aluminum tube, 1-½ x 1-¾ x.070 wall thickness, uniform throughout. Primary aluminum, Type 6063-T5 alloy. CONSTRUCTION: All heli-arc welded. All seams welded, feet capped and welded. WEIGHT CAPACITY: See Chart MOBILE UNITS MATERIAL: High tensile extruded aluminum tube, 1-½ x 2-¾ x.070 wall and 1-½ x 1-½ x.070 wall. Primary aluminum, Type 6063-T5 alloy. CONSTRUCTION: All heli-arc welded. WEIGHT CAPACITY: Maximum distributed load capacity is 1200#. CASTERS: Platform type with 1-3 /8 x 5 diameter wheel, thermoplastic rubber tread and ball bearing axle. Two swivel (#C455) and two rigid (#C460). NSF Certified STATIONARY DUNNAGE RACKS MODEL # OF WT. SIZE NO. LAT CAP. W-H-L WT # x 8 x # # x 8 x # # x 8 x # # x 12 x # # x 12 x # # x 12 x # # x 8 x # # x 8 x # # x 8 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # # x 8 x # # x 8 x # # x 8 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # # x 12 x # Model #2012 has 6 legs. Maximum distributed load capacity: 2000# to 4000# (above) MOBILE DUNNAGE RACKS # x 8 x # # x 8 x # # x 8 x # # x 8 x # # x 8 x # # x 8 x # Handle For 20 Wide Units Above... 4# # x 8 x # # x 8 x # # x 8 x # # x 8 x # # x 8 x # # x 8 x # Handle For 24 Wide Units Above... 4# Four 5 plate casters: two swivel #C455 and two rigid #C460 UPS-able HEAVY DUTY CASTERS - Wt. Cap # Four 6 casters: two swivel (#C490) two rigid (#C500) -- Add HD6 suffix to model # Nobody Builds It Better. PHONE#: AX#:

19 SUPER Metroseal 3 Shelving 10.10A Item # Job Metroseal 3 is available on Super Erecta and Super Adjustable Super Erecta shelving systems. Metroseal 3 is applied using an exclusive state-of-the-art finishing and coating process that creates an attractive and corrosion-resistant finish. Metroseal 3 is enhanced with built-in Microban antimicrobial product protection, which protects the Metroseal 3 coating from bacteria, mold, mildew and fungi that cause odors, stains and product degradation. Exclusive Protection: Metro s new proprietary epoxy coating now contains Microban antimicrobial product protection. Microban protects the epoxy coating from bacteria, mold, mildew and fungi that cause odors, stains and product degradation. The storage system remains cleaner between cleanings. Attractive, Corrosion-Resistant Finish: Metroseal 3 is an attractive corrosion-resistant finish that protects the shelving against corrosive conditions found in walk-in coolers. Metro Shelving Systems: Metroseal 3 is a finish for the world s most popular shelving systems, Super Erecta and Super Adjustable Super Erecta. Both systems provide easy assembly without the use of special tools, adjustability at 1" (25mm) increments, greater air circulation and light penetration, a large selection of accessories, and the versatility to change as your storage needs change. Super Adjustable Super Erecta has the added feature of a unique patented corner release making it the easiest to adjust shelving system ever. Economical: Metroseal 3 storage shelving is an economical alternative to stainless steel, for use in environments that tend to corrode other metals. 12-Year Limited Warranty: Metroseal 3 is a corrosion-resistant finish for environments which can cause other metals to corrode. Metroseal 3 has a 12-year limited warranty against rust formation. Super Adjustable Super Erecta Super Erecta *MICROBAN and the MICROBAN symbol are registered trademarks of the Microban Products Company, Huntersville, NC. ERECTA AND SUPER ADJUSTABLE SUPER ERECTA InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA

20 10.10A Job SUPER ERECTA AND SUPER ADJUSTABLE SUPER ERECTA METROSEAL 3 SHELVING SUPER ERECTA AND SUPER ADJUSTABLE SUPER ERECTA Metroseal 3 Shelving Metroseal 3 Shelves Cat. No. Cat. No. Width Length Approx. Pkd Wt. Super Adjustable Super Erecta (in.) (mm) (in.) (mm) (lbs.) (kg) A1424NK3 1424NK A1430NK3 1430NK A1436NK3 1436NK A1442NK3 1442NK /2 4.3 A1448NK3 1448NK /2 4.7 A1460NK3 1460NK A1472NK3 1472NK A1824NK3 1824NK A1830NK3 1830NK A1836NK3 1836NK /2 4.3 A1842NK3 1842NK A1848NK3 1848NK A1854NK3 1854NK /2 6.6 A1860NK3 1860NK A1872NK3 1872NK A2124NK3 2124NK A2130NK3 2130NK A2136NK3 2136NK A2142NK3 2142NK A2148NK3 2148NK A2154NK3 2154NK A2160NK3 2160NK A2172NK3 2172NK A2424NK3 2424NK A2430NK3 2430NK A2436NK3 2436NK A2442NK3 2442NK A2448NK3 2448NK A2454NK3 2454NK A2460NK3 2460NK A2472NK3 2472NK A3036NK A3048NK A3060NK / A3072NK A3636NK A3648NK A3660NK A3672NK / SiteSelect Posts Cat. No. Height* Approx. Pkd. Wt. Metroseal 3 (in.) (mm) (lbs.) (kg) 13PK / PK / PK / PK / / PK / PK / *Height includes leveling bolt and cap. All Metro Catalog Sheets are available on our Web Site: Every Metroseal 3 shelf and post is backed by a limited 12-year warranty against surface rust formation. Super Erecta Split Sleeves Super Adjustable Wedges and Corner Release System Important: When ordering by components remember that stability decreases as the ratio of height to width increases. Units should be kept as wide and low as possible. SiteSelect Posts are grooved at 1" (25mm) increments and numbered at 2" (50mm) increments. Posts are double-grooved every 8" (203mm) for easy identification. InterMetro Industries Corporation North Washington Street, Wilkes-Barre, PA Phone: Fax: For Product Information Call: L02-010B Printed in U.S.A. Rev. 11/02 Information and specifications are subject to change without notice. Please confirm at time of order. Copyright 2002 InterMetro Industries Corp.

21 Project: Item #: Model #: Qty: AIA# SIS# Beer Line Chillers 1/3 HP Beer Line Chiller Model: BLC-1/3-E Standard Features: Glycol connections with flared fittings for easy service access Durable black vinyl-clad exterior with 16 gauge galvanized steel base Stainless steel, CFC-free, foamed-in-place insulated glycol bath High efficiency heat exchanger minimizes glycol bath size to one gallon Front located glycol filling port 3/4 HP Beer Line Chiller BLC-1/3-E 1/3 and 1/2 HP Beer Line Chillers with Remote Installable Control Panel Models: BLC-1/3, BLC-1/3-2, BLC-1/2, BLC-1/2-2 BLC-1/3-2 Standard Features: Control panel is removable and includes wall bracket for remote installation Glycol connections with flared fittings for easy service access Durable black vinyl-clad exterior with 16 gauge galvanized steel base Stainless steel, CFC-free, foamed-in-place insulated glycol bath High efficiency heat exchanger minimizes glycol bath size to one gallon Front located glycol filling port Digital temperature control with LCD display Over-sized condenser coil for maximum efficiency Clear glycol bath cover for easy visual inspection Available with two recirculating pumps (designated by -2 suffix in model number) Model: LC47 Standard Features: Modular lift-out refrigeration system for easy in-field service High capacity refrigeration and recirculation for long distance installations Roto-molded gallon glycol bath with drain is CFC-free foamed-inplace insulated Front mounted glycol bath level indicator Available with two recirculating pumps (specify APK-47 accessory) LC-47 Glastender, Inc North Michigan Road Saginaw, MI Fax Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 7.01 Approval/Notes: Rev

22 Remote Draft Beer Line Chillers Dimensional and Specification Information Model No. BLC-1/3-E BLC-1/3 BLC-1/3-2 BLC-1/2 BLC-1/2-2 LC47 Dimensions Length 24" 24-5/8" 24-5/8" 24-5/8" 24-5/8" " Width 21-1/4" 24-1/8" 24-1/8" 24-1/8" 24-1/8" " Height 14-3/4" 16" 16" 16" 16" 34.56" Note: A minimum six inch clearance should be allowed around the entire unit for proper air flow. Additional clearance should be considered above and in front of the unit for service access. Electrical Voltage 120V 120V 120V 120V 120V 230V Frequency 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz 60 Hz Phase 1ø 1ø 1ø 1ø 1ø 1ø FLA Dedicated Circuit 20A 20A 30A 20A 30A 20A Electrical Connection Cord & Plug Cord & Plug Hard Wire Cord & Plug Hard Wire Hard Wire Refrigerant R134a R134a R134a R134a R134a R134a Compressor 1/3 HP 1/3 HP 1/3 HP 1/2 HP 1/2 HP 3/4 HP Max Distance to Taps 125 ft. 125 ft. 125 ft. 250 ft. 250 ft. 400 ft. Circulating Pumps 60 gph 60 gph 60 gph 60 gph 60 gph 60 gph Glycol Bath Capacity.94 gal.94 gal.94 gal.94 gal.94 gal gal Shipping Weight LBS (kg) 128 (58.1) 150 (68.0) 163 (73.9) 153 (69.4) 166 (75.3) 155 (70.5) Remote Mounted Control Panel Installation Details The Glastender exclusive, patented beer line chiller design houses the heat exchanger inside the condensing unit compartment. This unique feature allows the control panel with glycol bath and recirculating pump(s) to be easily installed separate from the condensing unit in a more conveniently accessible location. Simply remove the control panel from the condensing unit cabinet and mount it in the desired location. Only glycol and electrical lines need to be run between the control panel and the condensing unit cabinet. Electrical connection between condensing unit and control panel by local electrician Glycol line from heat exchanger to bath Digital temperature control with LCD display Photo shows BLC-1/3 in an installation setting with the control panel installed remotely from the condensing unit cabinet. Condensing unit and heat exchanger cabinet Glycol return from beer tower to heat exchanger Glycol line from pump to beer tower Glycol line from bath to pump Recirculating pump.94 gallon glycol bath Power cord for unit 5400 North Michigan Road Saginaw, MI Fax Printed in USA

23 JOB: ITEM #: QUANTITY: KEG STACKERS Keg Stackers Built To Withstand The Impact Shock Of Dropped Kegs These heavy duty aluminum units store ¼ and ½ barrels (kegs) of beer as well as dry general storage. Made similar to our T-Bar Series shelves, these shelves are extra-reinforced for the added abuse associated with handling kegs. Unlike most wire shelves, these units have easy-to-clean flat surfaces that aid in the easy-on and easy-off of smaller heavy product. Approved for use in freezers, displays, as well as packaging and storage areas, these heavy duty all welded aluminum racks keep product organized and off of the floor while providing adequate air flow. KEG STACKERS Adjustable Fully adjustable shelves can be adjusted to fit your specific requirements. Units assemble in minutes with only an allen wrench (provided). Aluminum posts are marked in 2 increments for easy leveling with all ends capped. Keg Stacker - Model #NS933 Guaranteed To Last Guaranteed to last, each rack carries a Lifetime Guarantee against rust and corrosion as well as a Five-Year Guarantee against material defects and workmanship. ALUMINUM SPECIALISTS New Age Industrial Corp., Inc. E Hwy-36 PO Box 520 Norton, Kansas Phone: Fax: NSF Certified 0900

24 KEG STACKERS JOB: ITEM #: QUANTITY: KEG STACKERS SPECIFICATIONS APPLICATION: Storage of ¼ or ½ barrels (kegs) of beer - wet or dry general storage of large or heavy items. CONSTRUCTION: Heavy duty, high tensile extruded aluminum, Type 6063-T5 alloy. SHELVES: Each unit has three shelves, two of which are heavy duty and support beer barrels (kegs) while the third is for general storage. KEG SHELVES: These heavy duty shelves incorporate a rectangular frame of 1-½ x 2-¾ x.070 wall extruded aluminum tube with 1-¼ x 2-¼ x.100 T-Bar welded inside, (3 spacing between T-Bars) perpendicular to the shelf length. GENERAL STORAGE SHELVES: The top shelf has a rectangular frame of 1-½ x 1-¾ x.070 wall extruded aluminum tube with 1-¼ x 2-¼ x.100 T-Bar welded inside. BOTH: Each shelf corner has a heavy duty extruded aluminum collar permanently welded in place which accommodates the upright. A stainless steel set screw is provided in each collar to lock the shelf at the desired height. Model #1289 will use an additional pair of uprights to give extra support to the center span. UPRIGHTS: The uprights are extruded aluminum pipe (6063-T5 alloy) with an outside diameter of 1-5 / 16 and wall thickness of.150. Each upright is marked in two inch increments and fitted with plastic end caps in each end. NSF Certified Model Size ½-Barrel No. Ship No. D-H-L Cap. Shelves Wt. COMPLETE UNITS 31842TT " x 76" x # NS " x 76" x 60" # " x 76" x 80" # 1289 *... 18" x 76" x 93" # KEG SHELVES ONLY Posts sold separately**customize Your Own Units** Model #NS933 Keg Stackers " x 3" x 60" # " x 3" x 80" # *... 18" x 3" x 93" # U-BRACES " x 2" x 60" # " x 2" x 80"... 9# *... 18" x 2" x 93"... 10# * 93" Shelves Require Six Posts UPS-able (other model # s must ship common carrier) 0900 ALUMINUM SPECIALISTS Nobody Builds It Better. Phone: Fax:

25 SUPER Metroseal 3 Shelving 10.10A Item # Job Metroseal 3 is available on Super Erecta and Super Adjustable Super Erecta shelving systems. Metroseal 3 is applied using an exclusive state-of-the-art finishing and coating process that creates an attractive and corrosion-resistant finish. Metroseal 3 is enhanced with built-in Microban antimicrobial product protection, which protects the Metroseal 3 coating from bacteria, mold, mildew and fungi that cause odors, stains and product degradation. Exclusive Protection: Metro s new proprietary epoxy coating now contains Microban antimicrobial product protection. Microban protects the epoxy coating from bacteria, mold, mildew and fungi that cause odors, stains and product degradation. The storage system remains cleaner between cleanings. Attractive, Corrosion-Resistant Finish: Metroseal 3 is an attractive corrosion-resistant finish that protects the shelving against corrosive conditions found in walk-in coolers. Metro Shelving Systems: Metroseal 3 is a finish for the world s most popular shelving systems, Super Erecta and Super Adjustable Super Erecta. Both systems provide easy assembly without the use of special tools, adjustability at 1" (25mm) increments, greater air circulation and light penetration, a large selection of accessories, and the versatility to change as your storage needs change. Super Adjustable Super Erecta has the added feature of a unique patented corner release making it the easiest to adjust shelving system ever. Economical: Metroseal 3 storage shelving is an economical alternative to stainless steel, for use in environments that tend to corrode other metals. 12-Year Limited Warranty: Metroseal 3 is a corrosion-resistant finish for environments which can cause other metals to corrode. Metroseal 3 has a 12-year limited warranty against rust formation. Super Adjustable Super Erecta Super Erecta *MICROBAN and the MICROBAN symbol are registered trademarks of the Microban Products Company, Huntersville, NC. ERECTA AND SUPER ADJUSTABLE SUPER ERECTA InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA

26 10.10A Job SUPER ERECTA AND SUPER ADJUSTABLE SUPER ERECTA METROSEAL 3 SHELVING SUPER ERECTA AND SUPER ADJUSTABLE SUPER ERECTA Metroseal 3 Shelving Metroseal 3 Shelves Cat. No. Cat. No. Width Length Approx. Pkd Wt. Super Adjustable Super Erecta (in.) (mm) (in.) (mm) (lbs.) (kg) A1424NK3 1424NK A1430NK3 1430NK A1436NK3 1436NK A1442NK3 1442NK /2 4.3 A1448NK3 1448NK /2 4.7 A1460NK3 1460NK A1472NK3 1472NK A1824NK3 1824NK A1830NK3 1830NK A1836NK3 1836NK /2 4.3 A1842NK3 1842NK A1848NK3 1848NK A1854NK3 1854NK /2 6.6 A1860NK3 1860NK A1872NK3 1872NK A2124NK3 2124NK A2130NK3 2130NK A2136NK3 2136NK A2142NK3 2142NK A2148NK3 2148NK A2154NK3 2154NK A2160NK3 2160NK A2172NK3 2172NK A2424NK3 2424NK A2430NK3 2430NK A2436NK3 2436NK A2442NK3 2442NK A2448NK3 2448NK A2454NK3 2454NK A2460NK3 2460NK A2472NK3 2472NK A3036NK A3048NK A3060NK / A3072NK A3636NK A3648NK A3660NK A3672NK / SiteSelect Posts Cat. No. Height* Approx. Pkd. Wt. Metroseal 3 (in.) (mm) (lbs.) (kg) 13PK / PK / PK / PK / / PK / PK / *Height includes leveling bolt and cap. All Metro Catalog Sheets are available on our Web Site: Every Metroseal 3 shelf and post is backed by a limited 12-year warranty against surface rust formation. Super Erecta Split Sleeves Super Adjustable Wedges and Corner Release System Important: When ordering by components remember that stability decreases as the ratio of height to width increases. Units should be kept as wide and low as possible. SiteSelect Posts are grooved at 1" (25mm) increments and numbered at 2" (50mm) increments. Posts are double-grooved every 8" (203mm) for easy identification. InterMetro Industries Corporation North Washington Street, Wilkes-Barre, PA Phone: Fax: For Product Information Call: L02-010B Printed in U.S.A. Rev. 11/02 Information and specifications are subject to change without notice. Please confirm at time of order. Copyright 2002 InterMetro Industries Corp.

27 SUPER Metroseal 3 Shelving 10.10A Item # Job Metroseal 3 is available on Super Erecta and Super Adjustable Super Erecta shelving systems. Metroseal 3 is applied using an exclusive state-of-the-art finishing and coating process that creates an attractive and corrosion-resistant finish. Metroseal 3 is enhanced with built-in Microban antimicrobial product protection, which protects the Metroseal 3 coating from bacteria, mold, mildew and fungi that cause odors, stains and product degradation. Exclusive Protection: Metro s new proprietary epoxy coating now contains Microban antimicrobial product protection. Microban protects the epoxy coating from bacteria, mold, mildew and fungi that cause odors, stains and product degradation. The storage system remains cleaner between cleanings. Attractive, Corrosion-Resistant Finish: Metroseal 3 is an attractive corrosion-resistant finish that protects the shelving against corrosive conditions found in walk-in coolers. Metro Shelving Systems: Metroseal 3 is a finish for the world s most popular shelving systems, Super Erecta and Super Adjustable Super Erecta. Both systems provide easy assembly without the use of special tools, adjustability at 1" (25mm) increments, greater air circulation and light penetration, a large selection of accessories, and the versatility to change as your storage needs change. Super Adjustable Super Erecta has the added feature of a unique patented corner release making it the easiest to adjust shelving system ever. Economical: Metroseal 3 storage shelving is an economical alternative to stainless steel, for use in environments that tend to corrode other metals. 12-Year Limited Warranty: Metroseal 3 is a corrosion-resistant finish for environments which can cause other metals to corrode. Metroseal 3 has a 12-year limited warranty against rust formation. Super Adjustable Super Erecta Super Erecta *MICROBAN and the MICROBAN symbol are registered trademarks of the Microban Products Company, Huntersville, NC. ERECTA AND SUPER ADJUSTABLE SUPER ERECTA InterMetro Industries Corporation North Washington Street Wilkes-Barre, PA

28 10.10A Job SUPER ERECTA AND SUPER ADJUSTABLE SUPER ERECTA METROSEAL 3 SHELVING SUPER ERECTA AND SUPER ADJUSTABLE SUPER ERECTA Metroseal 3 Shelving Metroseal 3 Shelves Cat. No. Cat. No. Width Length Approx. Pkd Wt. Super Adjustable Super Erecta (in.) (mm) (in.) (mm) (lbs.) (kg) A1424NK3 1424NK A1430NK3 1430NK A1436NK3 1436NK A1442NK3 1442NK /2 4.3 A1448NK3 1448NK /2 4.7 A1460NK3 1460NK A1472NK3 1472NK A1824NK3 1824NK A1830NK3 1830NK A1836NK3 1836NK /2 4.3 A1842NK3 1842NK A1848NK3 1848NK A1854NK3 1854NK /2 6.6 A1860NK3 1860NK A1872NK3 1872NK A2124NK3 2124NK A2130NK3 2130NK A2136NK3 2136NK A2142NK3 2142NK A2148NK3 2148NK A2154NK3 2154NK A2160NK3 2160NK A2172NK3 2172NK A2424NK3 2424NK A2430NK3 2430NK A2436NK3 2436NK A2442NK3 2442NK A2448NK3 2448NK A2454NK3 2454NK A2460NK3 2460NK A2472NK3 2472NK A3036NK A3048NK A3060NK / A3072NK A3636NK A3648NK A3660NK A3672NK / SiteSelect Posts Cat. No. Height* Approx. Pkd. Wt. Metroseal 3 (in.) (mm) (lbs.) (kg) 13PK / PK / PK / PK / / PK / PK / *Height includes leveling bolt and cap. All Metro Catalog Sheets are available on our Web Site: Every Metroseal 3 shelf and post is backed by a limited 12-year warranty against surface rust formation. Super Erecta Split Sleeves Super Adjustable Wedges and Corner Release System Important: When ordering by components remember that stability decreases as the ratio of height to width increases. Units should be kept as wide and low as possible. SiteSelect Posts are grooved at 1" (25mm) increments and numbered at 2" (50mm) increments. Posts are double-grooved every 8" (203mm) for easy identification. InterMetro Industries Corporation North Washington Street, Wilkes-Barre, PA Phone: Fax: For Product Information Call: L02-010B Printed in U.S.A. Rev. 11/02 Information and specifications are subject to change without notice. Please confirm at time of order. Copyright 2002 InterMetro Industries Corp.

29 STAINLESS STEEL WORK TABLES PREMIUM Series - 5 Backsplash - Undershelf Style Item #: Qty #: Model #: Project #: FEATURES: Top is furnished with a 1 5/8 sanitary rolled rim edge on front, 1 5/8 square side edges, and a 5 splash with a 1 return on the rear side. 24 wide tables supplied with TWO hat channels stud welded to reinforce and maintain a level working surface. 30 and 36 wide tables supplied with THREE hat channels. Pre-engineered welded angle adapters insure ease of future drawer installation. Aluminum die cast leg-to-shelf clamp secures shelf to leg eliminating unsightly nuts and bolts. Undershelf is adjustable. CONSTRUCTION: All TIG welded. Exposed weld areas polished to match adjacent surfaces. Entire top mechanically polished to a satin finish. Top is sound deadened. Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs. Gussets welded to support hat sections. KSS-Series: Stainless Steel Legs & Undershelf L Wide Wide Wide KSS-240 KSS-242 KSS-243 KSS-244 KSS-245 KSS-246 KSS-247 KSS-248 KSS-249 KSS-2410 KSS-2411 KSS-2412 KSS-300 KSS-302 KSS-303 KSS-304 KSS-305 KSS-306 KSS-307 KSS-308 KSS-309 KSS-3010 KSS-3011 KSS-3012 KSS-363 KSS-364 KSS-365 KSS-366 KSS-367 KSS-368 KSS-369 KSS-3610 KSS-3611 KSS-3612 NEW Rolled Rim Edges on Front & Splash on Back and Square Side Edges MATERIAL: KSS-SERIES: Stainless Steel Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge stainless steel. LEGS: 1 5/8 diameter tubular stainless steel. 1 adjustable stainless steel bullet feet. Stainless steel gussets. KLG-SERIES: Galvanized Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge galvanized steel. LEGS: 1 5/8 diameter tubular galvanized steel. 1 adjustable plastic bullet feet. Galvanized steel gussets. KLG-Series: Galvanized Steel Legs & Undershelf L Wide Wide Wide KLG-240 KLG-242 KLG-243 KLG-244 KLG-245 KLG-246 KLG-247 KLG-248 KLG-249 KLG-2410 KLG-2411 KLG-2412 KLG-300 KLG-302 KLG-303 KLG-304 KLG-305 KLG-306 KLG-307 KLG-308 KLG-309 KLG-3010 KLG-3011 KLG-3012 Featuring as Standard: THE PROVEN ORIGINAL ADVANCE TABCO Adjustable Undershelf with Die Cast Leg Clamp KLG-363 KLG-364 KLG-365 KLG-366 KLG-367 KLG-368 KLG-369 KLG-3610 KLG-3611 KLG-3612 Create Your Own Efficient Workstation with the Available Standard Accessories (Visit Section K) Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) J-2

30 ALL DIMENSIONS ARE TYPICAL TOL ±.500 DETAILS and SPECIFICATIONS All Units Shipped Unassembled (KD) for Reduced Shipping Costs. KSS & KLG Series Undershelf Style 5 Backsplash Finished size of undershelf = Length minus 5 3/4 Width minus 5 3/4 Units 8ft. and larger are furnished with six (6) legs KSS-Series: Stainless Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide KSS-240 KSS-242 KSS-243 KSS-244 KSS-245 KSS-246 KSS-247 KSS-248 KSS-249 KSS-2410 KSS-2411 KSS lbs. 50 lbs. 66 lbs. 81 lbs. 95 lbs. 113 lbs. 135 lbs. 150 lbs. 165 lbs. 268 lbs. 301 lbs. 316 lbs. KSS-300 KSS-302 KSS-303 KSS-304 KSS-305 KSS-306 KSS-307 KSS-308 KSS-309 KSS-3010 KSS-3011 KSS lbs. 56 lbs. 77 lbs. 92 lbs. 111 lbs. 129 lbs. 153 lbs. 171 lbs. 195 lbs. 294 lbs. 331 lbs. 346 lbs. KSS-363 KSS-364 KSS-365 KSS-366 KSS-367 KSS-368 KSS-369 KSS-3610 KSS-3611 KSS lbs. 101 lbs. 121 lbs. 142 lbs. 169 lbs. 189 lbs. 260 lbs. 315 lbs. 358 lbs. 373 lbs. KLG-Series: Galvanized Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide KLG-240 KLG-242 KLG-243 KLG-244 KLG-245 KLG-246 KLG-247 KLG-248 KLG-249 KLG-2410 KLG-2411 KLG lbs. 50 lbs. 66 lbs. 81 lbs. 95 lbs. 113 lbs. 135 lbs. 150 lbs. 165 lbs. 268 lbs. 301 lbs. 316 lbs. KLG-300 KLG-302 KLG-303 KLG-304 KLG-305 KLG-306 KLG-307 KLG-308 KLG-309 KLG-3010 KLG-3011 KLG lbs. 56 lbs. 77 lbs. 92 lbs. 111 lbs. 129 lbs. 153 lbs. 171 lbs. 195 lbs. 294 lbs. 331 lbs. 346 lbs. KLG-363 KLG-364 KLG-365 KLG-366 KLG-367 KLG-368 KLG-369 KLG-3610 KLG-3611 KLG lbs. 101 lbs. 121 lbs. 142 lbs. 169 lbs. 189 lbs. 260 lbs. 315 lbs. 358 lbs. 373 lbs. J-2a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, SEPTEMBER 2005

31 STAINLESS STEEL & ALUMINUM WALL SHELVES KD Wall Shelf Item #: Qty #: Model #: Project #: FEATURES: Furnished with a 1 1/2 sanitary rolled rim with a 1-1/4 turn-up edge on sides and rear. Unit is easily assembled employing the slip-fit TAB-LOK design. CONSTRUCTION: Shelf and brackets are die stamped and die formed. MATERIAL: WS-KD Series - 18 gauge stainless steel polished to a satin finish. AWS-KD Series - Heavy gauge aluminum. Requirements for NSF Installations 1. Install at least 60 above floor. 2. Limit to dry storage. 3. Avoid contact with liquids. 4. For Ganging-Up installation, allow at least 2 between units or mount units side by side and seal joints with an approved sealant. S/S ALUMINUM length WS-KD-24 WS-KD-36 WS-KD-48 WS-KD-60 AWS-KD-24 AWS-KD-36 AWS-KD-48 AWS-KD Standard Wall Shelf Furnished with a 1 1/2 sanitary rolled rim with a 1-1/2 turn-up edge at rear. Ends are turned down square. 18 gauge type 430 stainless steel. Secured to wall by means of bolts through support brackets. Brackets can be positioned to accomodate wall studs. Units 7 ft. and larger are furnished with 3 brackets. 10 Qty 12 Qty 15 Qty 18 Wide Wide Wide Wide WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS Qty Length = 24 to 144 in 12 increments. Width A USE TA-49 For Wall Shelf Offset 2" WALL Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DEC L-5

32 REFRIGERATORS Utilizing Environmentally Safe, CFC-free R-134a Refrigerant 1RE 1RX EXTRA-WIDE REFRIGERATORS Standard Features Modern, State-of-the-Art Styling Performance Rated Refrigeration System Utilizing Environmentally Safe R-134a Refrigerant 3" Non-CFC Polyurethane Foam Insulation Chrome Plated Flow Line Handles Cam-Action Lift-Off Hinges Self-Closing Doors Automatic Interior Lighting Magnetic Snap-In Door Gasket Cylinder Lock In Each Door Automatic Electric Condensate Evaporator 5" Casters Heavy-Duty, Epoxy-Coated Steel Shelves External Dial Thermometer Standard (S/S Front, Aluminum End Panels & Interior) Suffix SA (S/S Exterior, Aluminum Interior) Suffix SS (S/S Exterior & Interior) 2RE 3RE Optional Features & Accessories Stainless Steel or Black Legs Digital Thermometer Rehinging of Doors Stainless Steel Case Back Half Door Model Pan Slide Assemblies Remote Model Increased Refrigeration Systems Pass-Thru Model Shallow Depth Model Stainless Steel Shelves Hinged Glass Door

33 SPECIFICATIONS REFRIGERATORS 1RE 1RX 2RE 3RE One Section One Section Extra-Wide Two Section Three Section CHARACTERISTICS Reach-In Pass-Thru Reach-In Pass-Thru Reach-In Pass-Thru Reach-In Pass-Thru DIMENSIONAL DATA Net Capacity (cu.ft.) Width, Overall (in.) 28 1 / / / / / /2 Depth, Overall (Incl. Hdls.) (in.) 35 1 / / / /2 39 Depth (Less Door(s)) (in.) Depth (Door(s) Open 90 ) (in.) Clear Door Width (in.) 21 7 / / / / / / / /8 Clear Full-Door Height (in.) 58 5 / / / / / / / /8 Clear Half-Door Height (in.) 27 1 / / / / / / / /2 Height, Overall (Incl. 5" Casters) (in.) 82 1 / / / / / / / /4 Full Door(s) Half Door(s) Shelves Shelf Area (sq. ft.) Tray Slide Capacity (Half) 11 ea. 11 ea. 11 ea. 11 ea. 11 ea. 11 ea. 11 ea. 11 ea. Tray Slide Capacity (Full) 24 ea. 24 ea. 24 ea. 24 ea. 24 ea. 24 ea. 24 ea. 24 ea. SIDE VIEW REFRIGERATION DATA Condensing Unit Size (H.P.) 1 /4 1 /4 1 /4 1 /4 1 /3 1 /3 1 /2 1 /2 Capacity (BTU/Hr)* ELECTRICAL DATA Cabinet Specifications 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 Feed Wires (Incl. Ground) Condensing Unit Specs. 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 Total Amperes Cabinet Amperes Defrost Amperes Power Supply Cord yes yes yes yes yes yes yes yes SHIPPING DATA Height crated (in.) 85 1 / / / / / / / /2 Width crated (in.) 31 5 / / Depth crated (in.) Volume crated (cu. ft.) Weight Std crated (lbs.) Weight SS crated (lbs.) Weight Std uncrated (lbs.) Weight SS uncrated (lbs.) RE FRONT VIEW 1RX FRONT VIEW +25 F Evaporator, 90 Ambient Note: If the cabinet is located directly against wall and/or under low ceiling, a minimum clearance of 2" is required. Note: All specifications subject to change without notice. A Division of National Refrigeration & A/C Products, Inc. 539 Dunksferry Road Bensalem, PA (800) Fax: (215) RE FRONT VIEW 85 1 /2 3RE FRONT VIEW RE305

34 STAINLESS STEEL ENCLOSED BASE BEVERAGE TABLE Item #: Qty #: Model #: Project #: Model # Length Weight BEV-30-48LorR* BEV-30-60LorR* BEV-30-72LorR* BEV-30-84LorR* BEV-30-96LorR* BEV LorR* BEV LorR* BEV LorR* lbs. 250 lbs. 300 lbs. 350 lbs. 400 lbs. 450 lbs. 500 lbs. 550 lbs. *SPECIFY SINK LEFT OR RIGHT END: Please designate left or right sink location by using L or R after model number when ordering FEATURES: Top is furnished with a 2 x 1 square die embossed No-Drip countertop offset edge with 1/2 return on 3 sides and a 10 splash with a 2 return on the rear side. UNIT BODY DESIGN sides, back and shelf are welded to form a single rigid structure. Furnished with a stainless steel intermediate shelf and a 14 x 16 x 12 Deep Drawn sink bowl integrally welded to top. 1 1/2 I.P.S. basket type drain. TOP is assembled to body to form a flush fit and is supplied with a 5 x 1 urn trough with no-splash drain plate. G.F.I. duplex electrical outlet mounted in back splash. Front hinge door and open back under sink area permits ease-ofinstallation of plumbing fixtures. Partial undershelf for storage. Easy to install - multi-purpose unit. MATERIAL: TOP is 14 gauge stainless steel type 304 series. BODY is 18 gauge stainless steel type 430 series. LEGS are 1 5/8 diameter, tubular stainless steel with stainless steel gussets and 1 adjustable stainless steel bullet feet. FAUCET is splash mounted 4 O.C. with an 8 1/2 diameter gooseneck spout. Supply is 1/2 hot and cold. CONSTRUCTION: All TIG welded. TOP and all exposed surfaces are mechanically polished to a satin finish and sound deadened. Countertop edge is polished to a MIRROR finish. Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs. Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) O-4

35 TOL ±.500 DETAILS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL 14 x 16 x 12 Sink Bowl Deep Drawn Bowls Length 8" 5" 3" A 2" 3" Urn Trough Drain To be connected thru sink cabinet side panel 5" 30" Model # Length A B BEV-30-48LorR* BEV-30-60LorR* BEV-30-72LorR* BEV-30-84LorR* BEV-30-96LorR* BEV LorR* BEV LorR* BEV LorR* /8" B 4" 3" 10" 2" 2" Enclosed Rear Panel 2 1/2" 35 1/2" 12 7/8" 12" Stainless Steel Leg Gusset & Adjustable Bullet Foot 7" SUGGESTED PLUMBING COUNTERTOP EDGE DETAIL Rear of sink cabinet is open for easy plumbing installation SPLASH DETAIL O-4a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, JULY 2007

36 ITEM# 3, 3.5, 4, 5 Gallon Cylinder Style Iced Tea/Coffee Dispensers PROJECT DATE TDS-3 Dimensions: 19 H x 9.8 W x 12.8 D (48.3cm H x 24.9cm W x 32.5cm D) Features Iced Tea/Coffee Dispensers Dispensers available in 3, 3.5, 4, and 5 gallon (11.4, 13.2, 15.1 and 18.9 litres) capacities. Sump dispense valve assures complete dispensing of tea. TDS-3, TDS-3.5 and TDS-5 models have stainless lid. TDO-4 and TDO-5 models have plastic lid and oval shape. Faucet handles are labeled sweetened and unsweetened. Handles are mounted offset for closer side-by-side positioning.* * Some TDS-3 and TDS-5 models in stock may not have these features. TDS-3.5 Dimensions: 20.4 H x 9.8 W x 12.8 D (51.8cm H x 24.9cm W x 32.5cm D) TDS-5 Dimensions: 25.6 H x 9.8 W x 14.8 D (65cm H x 37.8cm W x 37.6cm D) TDO-4 Dimensions: 19 H x 10.7 W x 13.7 D (48.3cm H x 27.2cm W x 34.8cm D) TDO-5 Dimensions: 22 H x 10.7 W x 13.7 D (55.9cm H x 27.2cm W x 34.8cm D) For current specification sheets and other information, go to Related Products ICD-3 Iced Coffee Dispenser Product No. : Dimensions: 20.6 H x 9.8 W x 14 D 52.3cm H x 37.8cm W x 35.6cm D TDO Brew-Through Lid Product No. : TDO Lid Retainer Product No. : Dimensions: 5.25 H x 11 W x 10.2 D 13.3cm H x 27.9cm W x 10.2cm D Remote Stand Product No.: Model TDS-3 TDS-3.5 TDS-5 ICD-3 TDO-4 TDO-5 E C Agency Listing Patents Apply 3/07 B7

37 Dimensions & Specifications Model Product # Capacity Handles Cubic Measure Shipping Weight TDS Gallons Side 2.2 ft lbs. TDS Gallons Side 2.6 ft 3 10 lbs. TDS Gallons Side 2.9 ft 3 12 lbs. ICD Gallons Side 2.2 ft 3 10 lbs. TDO-4 (solid lid) Gallons Side 2.1 ft 3 12 lbs. TDO-4 (brew-through lid) Gallons Side 2.1 ft 3 12 lbs. TDO-5 (solid lid) Gallons Side 2.4 ft 3 14 lbs. TDO-5 (brew-through lid) Gallons Side 2.4 ft 3 14 lbs. TDS-3 / ICD-3 TDS-3.5 TDS-5 (10.65) LID (9.80) RSVR. (10.65) LID (9.80) RSVR. (13.65) LID (12.75) RSVR. (13.65) LID (12.75) RSVR. (19.00) RSVR. (22.125) RSVR (8.125) (8.125) 1.90 TDO TDO-5 BUNN Corporation Stevenson Drive Springfield, Illinois Fax BUNN practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment. All dimensions shown in inches. Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.

38 ITEM NUMBER: MODEL CBS-2052e SERIES 2000 Dispensers Sold Separately Patents: 6,148,717; 6,565,906; 6,576, ,208B1, 6,889,598 Other Patents Pending. International Patents Apply. The LUXUS Thermal Dispenser Brewing directly into our LUXUS Thermal Dispenser ensures a continuous flow of hot, aromatic, great tasting coffee. LUXUS Thermal Dispensers are totally portable and require no electric power to maintain serving temperature. LUXUS Thermal Dispensers remove the hazards of utilizing glass-lined products without loss of performance, while adding the durability of stainless steel. FETCO 600 Rose Road Lake Zurich, IL USA Printed in USA 2006 The Science of Extraction Meets The Art of Taste Never before has there been a coffee brewer that has been more dedicated to the art and science of extracting the perfect cup of coffee. Nor has there ever been a coffee brewer so advanced yet so easy to operate. Without a doubt, The Extractor Coffee Brewers are the smartest brewers in its class yet if won t intimidate the operator. Science of Extraction The best cups of coffee have an optimum balance of strength and extraction. Designed to achieve the optimal saturation, this brewer incorporates an innovative large spray disc, together with our renowned brew basket. Effortless Calibration Have you ever wished you had more time and energy to fine-tune your coffee brewer, but didn't want to go under the lid? Now you don't have to with The Extractor Coffee Brewers. Effortless external calibration and set-up are made easy through innovative front panel technology. Only what you need to know appears on the panel and just the selected options you choose remain activated. Outstanding Safety Operation The brew basket locks into place during the entire brew cycle (including spray-over and dwell times) for added operator safety (on select models). The Low-Temp/No-Brew feature if activated, stops brewing with tepid water. Batch sizes and hot water service features can be turned on or off during setup to streamline operator choices. Consultant & Contractor Approvals: Phone: (847) Toll Free: (800) FETCO-99 FAX: (847) sales@fetco.com

39 MODEL CBS-2052e SERIES 2000 Dimensions (Brewer): Height - 37 (940mm) Width - 22 (559mm) Depth - 22 (559mm) Dimensions (Shipping): Ships By Pallet Height - 35 (875mm) Width - 23 (575mm) Depth - 23 (575mm) Weight lbs (45 kg) FETCO 600 Rose Road Lake Zurich, IL USA Phone: (847) Toll Free: (800) FETCO-99 FAX: (847) sales@fetco.com Printed in USA 2006 FETCO, LUXUS, Extractor, Pulse-Brew, Driven To Pioneer Innovation and product dress are all trademarks or registered trademarks of Food Equipment Technologies Company

40 STAINLESS STEEL WORK TABLES PREMIUM Series - 5 Backsplash - Undershelf Style Item #: Qty #: Model #: Project #: FEATURES: Top is furnished with a 1 5/8 sanitary rolled rim edge on front, 1 5/8 square side edges, and a 5 splash with a 1 return on the rear side. 24 wide tables supplied with TWO hat channels stud welded to reinforce and maintain a level working surface. 30 and 36 wide tables supplied with THREE hat channels. Pre-engineered welded angle adapters insure ease of future drawer installation. Aluminum die cast leg-to-shelf clamp secures shelf to leg eliminating unsightly nuts and bolts. Undershelf is adjustable. CONSTRUCTION: All TIG welded. Exposed weld areas polished to match adjacent surfaces. Entire top mechanically polished to a satin finish. Top is sound deadened. Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs. Gussets welded to support hat sections. KSS-Series: Stainless Steel Legs & Undershelf L Wide Wide Wide KSS-240 KSS-242 KSS-243 KSS-244 KSS-245 KSS-246 KSS-247 KSS-248 KSS-249 KSS-2410 KSS-2411 KSS-2412 KSS-300 KSS-302 KSS-303 KSS-304 KSS-305 KSS-306 KSS-307 KSS-308 KSS-309 KSS-3010 KSS-3011 KSS-3012 KSS-363 KSS-364 KSS-365 KSS-366 KSS-367 KSS-368 KSS-369 KSS-3610 KSS-3611 KSS-3612 NEW Rolled Rim Edges on Front & Splash on Back and Square Side Edges MATERIAL: KSS-SERIES: Stainless Steel Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge stainless steel. LEGS: 1 5/8 diameter tubular stainless steel. 1 adjustable stainless steel bullet feet. Stainless steel gussets. KLG-SERIES: Galvanized Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge galvanized steel. LEGS: 1 5/8 diameter tubular galvanized steel. 1 adjustable plastic bullet feet. Galvanized steel gussets. KLG-Series: Galvanized Steel Legs & Undershelf L Wide Wide Wide KLG-240 KLG-242 KLG-243 KLG-244 KLG-245 KLG-246 KLG-247 KLG-248 KLG-249 KLG-2410 KLG-2411 KLG-2412 KLG-300 KLG-302 KLG-303 KLG-304 KLG-305 KLG-306 KLG-307 KLG-308 KLG-309 KLG-3010 KLG-3011 KLG-3012 Featuring as Standard: THE PROVEN ORIGINAL ADVANCE TABCO Adjustable Undershelf with Die Cast Leg Clamp KLG-363 KLG-364 KLG-365 KLG-366 KLG-367 KLG-368 KLG-369 KLG-3610 KLG-3611 KLG-3612 Create Your Own Efficient Workstation with the Available Standard Accessories (Visit Section K) Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) J-2

41 ALL DIMENSIONS ARE TYPICAL TOL ±.500 DETAILS and SPECIFICATIONS All Units Shipped Unassembled (KD) for Reduced Shipping Costs. KSS & KLG Series Undershelf Style 5 Backsplash Finished size of undershelf = Length minus 5 3/4 Width minus 5 3/4 Units 8ft. and larger are furnished with six (6) legs KSS-Series: Stainless Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide KSS-240 KSS-242 KSS-243 KSS-244 KSS-245 KSS-246 KSS-247 KSS-248 KSS-249 KSS-2410 KSS-2411 KSS lbs. 50 lbs. 66 lbs. 81 lbs. 95 lbs. 113 lbs. 135 lbs. 150 lbs. 165 lbs. 268 lbs. 301 lbs. 316 lbs. KSS-300 KSS-302 KSS-303 KSS-304 KSS-305 KSS-306 KSS-307 KSS-308 KSS-309 KSS-3010 KSS-3011 KSS lbs. 56 lbs. 77 lbs. 92 lbs. 111 lbs. 129 lbs. 153 lbs. 171 lbs. 195 lbs. 294 lbs. 331 lbs. 346 lbs. KSS-363 KSS-364 KSS-365 KSS-366 KSS-367 KSS-368 KSS-369 KSS-3610 KSS-3611 KSS lbs. 101 lbs. 121 lbs. 142 lbs. 169 lbs. 189 lbs. 260 lbs. 315 lbs. 358 lbs. 373 lbs. KLG-Series: Galvanized Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide KLG-240 KLG-242 KLG-243 KLG-244 KLG-245 KLG-246 KLG-247 KLG-248 KLG-249 KLG-2410 KLG-2411 KLG lbs. 50 lbs. 66 lbs. 81 lbs. 95 lbs. 113 lbs. 135 lbs. 150 lbs. 165 lbs. 268 lbs. 301 lbs. 316 lbs. KLG-300 KLG-302 KLG-303 KLG-304 KLG-305 KLG-306 KLG-307 KLG-308 KLG-309 KLG-3010 KLG-3011 KLG lbs. 56 lbs. 77 lbs. 92 lbs. 111 lbs. 129 lbs. 153 lbs. 171 lbs. 195 lbs. 294 lbs. 331 lbs. 346 lbs. KLG-363 KLG-364 KLG-365 KLG-366 KLG-367 KLG-368 KLG-369 KLG-3610 KLG-3611 KLG lbs. 101 lbs. 121 lbs. 142 lbs. 169 lbs. 189 lbs. 260 lbs. 315 lbs. 358 lbs. 373 lbs. J-2a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, SEPTEMBER 2005

42 STAINLESS STEEL & ALUMINUM WALL SHELVES KD Wall Shelf Item #: Qty #: Model #: Project #: FEATURES: Furnished with a 1 1/2 sanitary rolled rim with a 1-1/4 turn-up edge on sides and rear. Unit is easily assembled employing the slip-fit TAB-LOK design. CONSTRUCTION: Shelf and brackets are die stamped and die formed. MATERIAL: WS-KD Series - 18 gauge stainless steel polished to a satin finish. AWS-KD Series - Heavy gauge aluminum. Requirements for NSF Installations 1. Install at least 60 above floor. 2. Limit to dry storage. 3. Avoid contact with liquids. 4. For Ganging-Up installation, allow at least 2 between units or mount units side by side and seal joints with an approved sealant. S/S ALUMINUM length WS-KD-24 WS-KD-36 WS-KD-48 WS-KD-60 AWS-KD-24 AWS-KD-36 AWS-KD-48 AWS-KD Standard Wall Shelf Furnished with a 1 1/2 sanitary rolled rim with a 1-1/2 turn-up edge at rear. Ends are turned down square. 18 gauge type 430 stainless steel. Secured to wall by means of bolts through support brackets. Brackets can be positioned to accomodate wall studs. Units 7 ft. and larger are furnished with 3 brackets. 10 Qty 12 Qty 15 Qty 18 Wide Wide Wide Wide WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS Qty Length = 24 to 144 in 12 increments. Width A USE TA-49 For Wall Shelf Offset 2" WALL Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DEC L-5

43 Holman Cooking Equipment QCS Features/Benefits: QCS2 SERIES CONVEYOR TOASTERS Patented forced convection keeps the toaster cool to the touch and extends the life of critical components. The forced convection increases productivity by re-circulating pre-heated air into toasting chamber. Quartz infrared heaters provide faster, more consistent heating than traditional heating elements. Productivity - QCS2-500 produces 500 slices per hour operating on 120V. QCS2-800 produces 800 slices per hour. QCS2-600H with a 3" high opening produces 600 slices per hour. Compact - requires only 14-1/2" of counter space and our patented forced convection system allows the unit to be placed against a wall. Other toasters have louvers requiring additional counter space. Easy to use control panel takes the guesswork out of temperature and speed control settings. Variable speed and top/bottom heat control for perfect color and texture of bread, bagels, English muffins and more! Energy efficient operation with power saver switch that reduces electricity consumption by 75%. And our quartz heaters return to full power in seconds vs. minutes for metal-sheathed elements. Extended conveyor belt for easy loading and large warming area for higher production. Safe load up area with full width coated front burn guard and cool to the touch exterior. "Smart" crumb tray keeps the bread crumbs from falling under the toaster. Heated holding area to keep toast at the perfect temperature. Hi-limit switch prevents toaster from overheating protecting critical component parts. 24 hours 7 days a week technical support by Holman technicians. QCS2-500 QCS Conveyor Toasters Applications: Breakfast lunch or dinner, the QCS2 series are versatile enough to fulfill your menu requirements. Holman's QCS2 series toasters can generate up to 800 slices per hour in only 14 ½ " of counter space. Choose from our high volume QCS2-800 in 208 or 240 volts or if your power requirements are 120 volts, the QCS2-500 will provide 500 golden slices of toast per hour. If you need a larger opening for Kaiser rolls, oversized bagels or sub rolls the QCS2-600H with a 3" product opening will provide the consistent quality you expect from a Holman toaster. QCS2-600H Quality Construction: Holman designs every toaster to stand up to the most rigorous foodservice demands. Stainless steel construction for long lasting durability. Heavy-duty motor, drive chain and conveyor speed control for superior reliability. Conveyor belt tension system for smooth and quiet operation. High performance Quartz Infrared Heaters for superior toasting performance and reliability. Units are easy to disassemble with one-piece cover for cleaning and service. Toasters are furnished with 1" adjustable legs and 4 cord. Warranty: Holman's conveyor toasters are covered by a one-year parts and labor warranty. Holman Cooking Equipment - 90 Industrial Park Road - P.O. Box Saco, ME Phone: (800) FAX: (207) QCS2-800 Holman is a subsidiary of Star Manufacturing In t, Inc. H216/0112

44 QCS Conveyor Toasters Holman Cooking Equipment Performance Data QCS2 SERIES CONVEYOR TOASTERS QCS-2 Model No. Production Capacities Product Openings QCS slices per hour 1-1/2 QCS2-600H 600 slices per hour 3 QCS slices per hour 1-1/2 Specifications Dimensions Shipping Shipping Carton Width Depth Height Weight Width Depth Height Inches Inches Inches lbs. Inches Inches Inches Model No. (cm) (cm) (cm) (kg) (cm) (cm) (cm) QCS /2 22-3/8 15-5/ /8 25-3/8 (36.8) (56.8) (39.7) (140.8) (50.8) (47.9) (64.4) QCS2-600H 14-1/2 22-3/8 15-5/ /8 25-3/8 (36.8) (56.8) (39.7) (140.8) (50.8) (47.9) (64.4) QCS /2 22-3/8 15-5/ /8 25-3/8 (36.8) (56.8) (39.7) (140.8) (50.8) (47.9) (64.4) Electrical Data Heating Elements¹ Model No. Volts HZ 1 Phase Amps Watts Above Belt Below Belt NEMA QCS P QCS2-600H P P Not supplied with cord and plug QCS P P Not supplied with cord and plug 1 Can be supplied with metal sheathed heaters (no additional charge), however production will be reduced. Typical Specifications Conveyor toasters are constructed of corrosion resistant stainless steel. Supplied with heavy-duty motor, drive chain and fast heat up quartz infrared heaters. A conveyor belt tension system is supplied for a smooth, quiet operation. Units are supplied with variable speed control, top and bottom heat control, power saver and high limit switch. Extended conveyor belt, crumb tray, heated holding area and full width burn guard are standard. Unit has a one-piece cover for easy access with 1" adjustable legs and a 4' cord. Units are listed with UL, CUL and are UL certified to NSF4. Printed in the U.S.A. Holman Cooking Equipment - 90 Industrial Park Road - P.O. Box Saco, ME Phone: (800) FAX: (207)

45 S-Series 422 Ice Cube Machine SY-0424A Ice Machine on B-420 Bin ANITATION We've made it simple to clean AVINGS The perfect balance of power and efficiency OUND Designed to run whisper-quiet ERVICEABILITY Easy access means less downtime Up to 460 lbs. (209 kgs.) daily ice production Up to CEE Tier 2 energy and water efficiency rating Only 22" (55.88 cm) wide Removable water distribution tube with no tools Food zone designed with soft, round, cove corners Patented cleaning and sanitizing technology Select components made with AlphaSan antimicrobial Hinged front door for easy access Warranty 5-year parts and 5-year labor coverage on ice machine evaporator 5-year parts and 3-year labor coverage on ice machine compressor 3-year parts-and-labor coverage on all other ice machine, dispenser, and storage bin components America's #1 Selling Ice Machine Ice Cube & Flake Machines Ice Storage Bins Ice Dispensers

46 Manitowoc S-Series 422 Ice Production 24 Hours Power Ice 70 Air/50 F Water 90 Air/70 F Water KWh/100 lbs. CEE* ENERGY Model Shape lbs. kgs. lbs. 90 /70 F Rating STAR* SY-0424A half-dice Tier 2 SY-0425W half-dice Tier 2 SD-0422A dice Tier 1 SD-0423W dice Tier 1 Ice Machine Electric 115/60/1 standard. ( /60/1 and 230/50/1 also available.) Min. circuit ampacity: Air-cooled: 13.6 amps Water-cooled: 12.9 amps Max. fuse size: Air-cooled and Water-cooled: 20 amps HACR-type circuit breakers can be used in place of fuses. Specifications BTU Per Hour: 7,000 (average) 9,600 (peak) Compressor: Nominal rating: 3/4 HP Cupra-Nickel Condenser: (Water-cooled models) Adds protection from corrosive water elements. Operating Limits: Ambient Temperature Range: Air and water-cooled: 35 to 110 F (1.6 to 43.3 C) Water Temperature Range: 35 to 90 F (1.6 to 32.2 C) Water Pressure Ice Maker Water In: Min. 20 psi (137.9 kpa) Max. 80 psi (551.1 kpa) Condenser Inlet Water In: (Water-cooled only) Min. 20 psi (137.9 kpa) Max. 150 psi (1,034.2 kpa) Space-Saving Designs Water usage/100 lbs./45.4 kgs. of Ice Potable Water: 18 gallons, 68 liters Water-cooled Condenser: 153 gallons, 579 liters. Order ice storage bin separately. A or W following model number indicates Air or Water condensing unit. *Consortium for Energy Efficiency (CEE) is a North American nonprofit organization that promotes energy-efficient products, technologies and services; also the principal entity for the development of ice maker efficiency standards. Certified in Accordance with ARI Automatic Commercial Ice-Cube Machines (Batch-Type) Certification Program, which is based on ARI Standard 810 Air Flow Top View FRONT Air-cooled FILTER AuCS SO Accessory Automatic Cleaning System purchased as an option and installed in the field. 2 Cube Sizes Available Half Dice 3 8" x 1 1 8" x 7 8" (.95 x 2.86 x 2.22 cm) Dice 7 8" x 7 8" x 7 8" (2.22 x 2.22 x 2.22 cm) S-422 S-422 B-420 B-400* Height 76.50" 64.50" cm cm Width 22.00" 30.00" cm cm Depth 34.00" 34.00" cm cm Bin 310 lbs. 290 lbs. Storage kgs kgs. Height includes adjustable bin legs 6.00" to 7.00", (15.24 to cm) set at 6.00" (15.24 cm). For comparison purposes multiply ARI capacity by 1.3 (30%) to arrive at approximate Application Rating Capacity. * K bin adapter required. A I R - C O O L E D WATER-COOLED Data is published for 60 Hz machines. 50 Hz machines produce approximately 7% less ice. S-422 on B-420 Storage Bin A Electrical Entrance (2) Options B 3/8" (0.95 cm) F.P.T. Water Condenser Inlet (water-cooled units) C 1/2" (1.27 cm) F.P.T. Water Condenser Outlet (water-cooled units) H O U R P R O D U C T I O N H A L F - D I C E C U B E D I C E C U B E air temp water temp air temp water temp F F C C H D 1/2" (1.27 cm) Auxillary Base Drain Socket E 3/8" (0.95 cm) F.P.T. Ice Making Water Inlet F 1/2" (1.27 cm) F.P.T. Ice Making Water Drain G AuCS Accessory Knockout H 3/4" (1.91 cm) Bin Drain Installation Note - Minimum installation clearance Top/sides: 8" (20.32 cm); Back: 5" (12.7 cm). ISO 9001: 2000 Quality System Certified D A C B E G F 22".00 (55.88 cm) 21.50" (54.6 cm) lbs. kgs. 2979D 2008 Manitowoc 8/08 Continuing product improvement may necessitate change of specifications without notice. MANITOWOC ICE 2110 South 26th Street, P.O. Box 1720 Manitowoc, WI , USA Ph: Fax: Visit us online at

47 STAINLESS STEEL WORK TABLES PREMIUM Series - 5 Backsplash - Undershelf Style Item #: Qty #: Model #: Project #: FEATURES: Top is furnished with a 1 5/8 sanitary rolled rim edge on front, 1 5/8 square side edges, and a 5 splash with a 1 return on the rear side. 24 wide tables supplied with TWO hat channels stud welded to reinforce and maintain a level working surface. 30 and 36 wide tables supplied with THREE hat channels. Pre-engineered welded angle adapters insure ease of future drawer installation. Aluminum die cast leg-to-shelf clamp secures shelf to leg eliminating unsightly nuts and bolts. Undershelf is adjustable. CONSTRUCTION: All TIG welded. Exposed weld areas polished to match adjacent surfaces. Entire top mechanically polished to a satin finish. Top is sound deadened. Roll formed embossed galvanized hat channels are secured to top by means of structural adhesive and weld studs. Gussets welded to support hat sections. KSS-Series: Stainless Steel Legs & Undershelf L Wide Wide Wide KSS-240 KSS-242 KSS-243 KSS-244 KSS-245 KSS-246 KSS-247 KSS-248 KSS-249 KSS-2410 KSS-2411 KSS-2412 KSS-300 KSS-302 KSS-303 KSS-304 KSS-305 KSS-306 KSS-307 KSS-308 KSS-309 KSS-3010 KSS-3011 KSS-3012 KSS-363 KSS-364 KSS-365 KSS-366 KSS-367 KSS-368 KSS-369 KSS-3610 KSS-3611 KSS-3612 NEW Rolled Rim Edges on Front & Splash on Back and Square Side Edges MATERIAL: KSS-SERIES: Stainless Steel Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge stainless steel. LEGS: 1 5/8 diameter tubular stainless steel. 1 adjustable stainless steel bullet feet. Stainless steel gussets. KLG-SERIES: Galvanized Legs & Undershelf TOP: 14 gauge stainless steel type 304 series. SHELF: 18 gauge galvanized steel. LEGS: 1 5/8 diameter tubular galvanized steel. 1 adjustable plastic bullet feet. Galvanized steel gussets. KLG-Series: Galvanized Steel Legs & Undershelf L Wide Wide Wide KLG-240 KLG-242 KLG-243 KLG-244 KLG-245 KLG-246 KLG-247 KLG-248 KLG-249 KLG-2410 KLG-2411 KLG-2412 KLG-300 KLG-302 KLG-303 KLG-304 KLG-305 KLG-306 KLG-307 KLG-308 KLG-309 KLG-3010 KLG-3011 KLG-3012 Featuring as Standard: THE PROVEN ORIGINAL ADVANCE TABCO Adjustable Undershelf with Die Cast Leg Clamp KLG-363 KLG-364 KLG-365 KLG-366 KLG-367 KLG-368 KLG-369 KLG-3610 KLG-3611 KLG-3612 Create Your Own Efficient Workstation with the Available Standard Accessories (Visit Section K) Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) J-2

48 ALL DIMENSIONS ARE TYPICAL TOL ±.500 DETAILS and SPECIFICATIONS All Units Shipped Unassembled (KD) for Reduced Shipping Costs. KSS & KLG Series Undershelf Style 5 Backsplash Finished size of undershelf = Length minus 5 3/4 Width minus 5 3/4 Units 8ft. and larger are furnished with six (6) legs KSS-Series: Stainless Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide KSS-240 KSS-242 KSS-243 KSS-244 KSS-245 KSS-246 KSS-247 KSS-248 KSS-249 KSS-2410 KSS-2411 KSS lbs. 50 lbs. 66 lbs. 81 lbs. 95 lbs. 113 lbs. 135 lbs. 150 lbs. 165 lbs. 268 lbs. 301 lbs. 316 lbs. KSS-300 KSS-302 KSS-303 KSS-304 KSS-305 KSS-306 KSS-307 KSS-308 KSS-309 KSS-3010 KSS-3011 KSS lbs. 56 lbs. 77 lbs. 92 lbs. 111 lbs. 129 lbs. 153 lbs. 171 lbs. 195 lbs. 294 lbs. 331 lbs. 346 lbs. KSS-363 KSS-364 KSS-365 KSS-366 KSS-367 KSS-368 KSS-369 KSS-3610 KSS-3611 KSS lbs. 101 lbs. 121 lbs. 142 lbs. 169 lbs. 189 lbs. 260 lbs. 315 lbs. 358 lbs. 373 lbs. KLG-Series: Galvanized Steel Legs & Undershelf 24 Wt. 30 Wt. 36 L Wt. Wide Wide Wide KLG-240 KLG-242 KLG-243 KLG-244 KLG-245 KLG-246 KLG-247 KLG-248 KLG-249 KLG-2410 KLG-2411 KLG lbs. 50 lbs. 66 lbs. 81 lbs. 95 lbs. 113 lbs. 135 lbs. 150 lbs. 165 lbs. 268 lbs. 301 lbs. 316 lbs. KLG-300 KLG-302 KLG-303 KLG-304 KLG-305 KLG-306 KLG-307 KLG-308 KLG-309 KLG-3010 KLG-3011 KLG lbs. 56 lbs. 77 lbs. 92 lbs. 111 lbs. 129 lbs. 153 lbs. 171 lbs. 195 lbs. 294 lbs. 331 lbs. 346 lbs. KLG-363 KLG-364 KLG-365 KLG-366 KLG-367 KLG-368 KLG-369 KLG-3610 KLG-3611 KLG lbs. 101 lbs. 121 lbs. 142 lbs. 169 lbs. 189 lbs. 260 lbs. 315 lbs. 358 lbs. 373 lbs. J-2a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, SEPTEMBER 2005

49 STAINLESS STEEL & ALUMINUM WALL SHELVES KD Wall Shelf Item #: Qty #: Model #: Project #: FEATURES: Furnished with a 1 1/2 sanitary rolled rim with a 1-1/4 turn-up edge on sides and rear. Unit is easily assembled employing the slip-fit TAB-LOK design. CONSTRUCTION: Shelf and brackets are die stamped and die formed. MATERIAL: WS-KD Series - 18 gauge stainless steel polished to a satin finish. AWS-KD Series - Heavy gauge aluminum. Requirements for NSF Installations 1. Install at least 60 above floor. 2. Limit to dry storage. 3. Avoid contact with liquids. 4. For Ganging-Up installation, allow at least 2 between units or mount units side by side and seal joints with an approved sealant. S/S ALUMINUM length WS-KD-24 WS-KD-36 WS-KD-48 WS-KD-60 AWS-KD-24 AWS-KD-36 AWS-KD-48 AWS-KD Standard Wall Shelf Furnished with a 1 1/2 sanitary rolled rim with a 1-1/2 turn-up edge at rear. Ends are turned down square. 18 gauge type 430 stainless steel. Secured to wall by means of bolts through support brackets. Brackets can be positioned to accomodate wall studs. Units 7 ft. and larger are furnished with 3 brackets. 10 Qty 12 Qty 15 Qty 18 Wide Wide Wide Wide WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS Qty Length = 24 to 144 in 12 increments. Width A USE TA-49 For Wall Shelf Offset 2" WALL Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DEC L-5

50 Star Manufacturing International, Inc. Features/Benefits: STANDARD WAFFLE BAKERS Model SWB7R1, SWB7R2 & SWB8SQ Star s Waffle Bakers make mouth-watering waffles for breakfast, snacks or anytime you want delicious waffles. Heavy-duty cast aluminum grids make 1-1/2 thick waffles producing 40 waffles per hour. Full floating hinge design made of heavy-duty stainless steel rises evenly for equal expansion for evenly cooked waffles every time. Digital electronic timer takes the guesswork out of preparing waffles. Metal sheathed tubular elements located on top and bottom grid provide even heat distribution. Easy to read on/off switch with indicator light signals when waffles are ready. Standard Waffle Bakers Applications: From cafes and coffee shops to full service restaurants, waffles are a crowd favorite. Star has the perfect waffle baker for any food service application. Model SWB7R1 Quality Construction: Star s Waffle Bakers are built of polished stainless steel with heavy-duty cast aluminum grids and feature a heavy-duty aluminum hinge. Metal sheathed tubular elements in the top and bottom grids, a preset bimetal fast acting thermostat installed in the bottom plate and a digital electronic timer with precision settings are standard. Models are provided with NEMA 5-15 plug for 120V and a NEMA 6-15 plug for 208V or 240V and CEE7-7 for 230V units. Canadian 120V models come with NEMA 5-20 plug. Warranty: Waffle Bakers are covered by Star's one year parts and labor warranty. Model SWB8SQ Star Manufacturing International Inc Sunnen Drive - P.O. Box St. Louis, MO Phone: (800) FAX: (800) S124/0072

51 Star Manufacturing International, Inc. Standard Waffle Bakers B A STANDARD WAFFLE BAKERS Model SWB7R1, SWB7R2 & SWB8SQ C B A C B A C C C C SWB7R1 SWB7R2 SWB8SQ Model Specifications Dimensions Approximate Weight (A) (B) (C) Model Description Width Depth Height Voltage Wattage Amps NEMA Shipping Installed No. Inches Inches Inches lbs. lbs. (cm) (cm) (cm) (kg) (kg) SWB7R1 Waffle Baker, Standard /4 22 (Open) 120V P " Round (25.4) (40) (55.9) 208V P (10.5) (9) 9-1/2 (Closed) 240V P (24.1) 230V CEE7-7 SWB7R2 Waffle Baker, Standard /4 22 (Open) 120V 1, P " Round Double (50.8) (40) (55.9) 208V 1, P (18.7) (17) 9-1/2 (Closed) 240V 1, P (24.1) 230V CEE7-7 SWB8SQ Waffle Baker, Standard /4 27 (Open) 120V 1, P " Square (25.4) (46.3) (68.6) 208V 1, P (16.5) (15) 12-1/2 (Closed) 240V 1, P (31.7) 230V CEE7-7 Typical Specifications Waffle Bakers are built of polished stainless steel and heavy-duty cast aluminum grids, uniform top and bottom. The grids are either 7" or 8" diameter depending on model. Waffle Baker has a full floating hinge made of heavy-duty stainless steel rising evenly to allow for equal expansion of cooking waffle. The unit has metal sheathed tubular elements in both grids. A preset bimetal fast acting thermostat installed in the bottom grid is standard. Waffle Baker has digital electronic timer with precision settings, heavy-duty rocker switch with an indicator light and a stainless steel drip tray. The Standard Waffle Baker models have a NEMA 5-15 plug (120V), a NEMA 6-15 plug (208V/240V) and a 5-20 plug (120V) for Canada. Units are listed by Underwriter's Laboratories. Printed U.S.A. Star Manufacturing International Inc Sunnen Drive - P.O. Box St. Louis, MO Phone: (800) FAX: (800)

52 Star Manufacturing International, Inc. SMOOTH TWO-SIDED GRILLS WITH TIMERS Model GR10T, GR10IT, GR14T, GR14IT & GR28IT Features/Benefits: Euro-style design and stainless steel construction are built to deliver years of maintenance free operation. Heavy-duty cast iron or aluminum platens provides superior performance and long life. A counter balance hinge system provides for safe and effortless operation of the top platen. Spacious grilling height accommodates product up to three inches. Electronic programmable timer from 0 to 9:59 minutes with "LED" display. The timer counts down the cooking time and is equipped with an audible alarm to signal when the timer reaches zero. On/off 3-position switch allows the operation of the bottom platen only with switch in middle position, power both top and bottom platens with switch in up position and off in down position. Thermostat is rated from 175 F (79 C) to 550 F (302 C) and provides accurate sensing of temperature. Front grease trough and drawer for convenient operation. Performance Two-Sided Grills can prepare chicken breasts, hamburgers, quesadillas and many other products in half the time of standard griddles. The heavy-duty platens retain energy and deliver faster performance. Construction Features The rugged body is constructed of 18 gauge stainless steel. The grease drawer is positioned in the front of the unit for easier clean-up. The counter balance mechanism is constructed from hardened aluminum for strength and durability. The 6 foot lead-in cord has a special covering that is resistant to water and oil and the wires are protected by metallic braiding. Cord comes complete with plug (see typical specifications). Model GR10IT Smooth Two-Sided Grill with Electironic Timers Warranty Two-Sided Grills are covered by Star s one year parts and labor warranty. Model GR14T Star Manufacturing International Inc Sunnen Drive - P.O. Box St. Louis, MO Phone: (800) FAX: (800) S114/0062

53 ON ( I) OFF ( O ) POWER ON ( I) OFF ( O ) POWER START STOP O N ( I) O FF ( O ) POWER ON ( I) O FF ( O ) POWER START STOP Star Manufacturing International, Inc. Smooth Two-Sided Grill with Electironic Timers SMOOTH TWO-SIDED GRILLS WITH TIMERS Model GR10T, GR10IT, GR14T, GR14IT & GR28IT A B D Model and Specifications C Height Approximate Weight Model Grill Width Depth Closed Open Voltage Wattage Amps NEMA Shipping Installed No. Surface (cm) (cm) (cm) (cm) (kg) (kg) GR10T Alum. 16-1/8 21-1/8 13-1/4 29-1/2 120V P 46 lbs. 36 lbs. (40.9) (53.7) (33.7) (74.9) 208/240V P (20.9) (16.3) GR10IT Iron 16-1/8 21-1/8 13-1/4 29-1/2 120V P 63 lbs. 57 lbs. (40.9) (53.7) (33.7) (74.9) 208/240V P (30.4) (28.1) GR14T Alum. 19-5/8 24-3/4 13-1/2 32-3/4 120V P 68 lbs. 55 lbs (39.7) (62.9) (34..3) (83.2) 208/240V 1350/ / P (29.5) (24.9) A B D C GR14IT Iron 19-5/8 24-3/ /2 208V P 101 lbs. 91 lbs. (39.7) (62.9) (43.2) (92.7) 240V (45.9) (41.3) GR28IT Alum. 34-1/4 24-3/ V L6-30P 206 lbs. 171 lbs. (87.0) (62.9) (43.2) (91.4) 240V (93.4) (77.5) Typical Specifications Two-Sided Grill is constructed with an 18 gauge stainless steel body and smooth platens. A counter balance mechanism provides easy operation of the top platen. Grilling height between platens is up to 3" with counter balance system providing 3-4 pounds of pressure to the cooking product placed on bottom platen. Metal sheathed tubular elements are provided as standard. An audible alarm signals when the timer has counted down to zero is supplied. Adjustable(1/2") non-skid feet are standard. Unit is be provided with pilot light, six foot power cord with Nema rated plug (120V: 5-15P, 240V: 6-15P). Unit carries approval of UL, UL Sanitation or UL Canada Printed in the U.S.A. Star Manufacturing International Inc Sunnen Drive - P.O. Box St. Louis, MO Phone: (800) FAX: (800)

54 REFRIGERATORS Utilizing Environmentally Safe, CFC-free R-134a Refrigerant DL1G-SS DL2G-SS GRIDDLE STAND REFRIGERATORS Standard Features Stainless Steel Exterior and Interior Plasticized Fin Evaporator Coil Capillary Dial Thermometer Anti-Sweat Drawer Heaters Chrome-Plated Hardware Heavy-Duty Diecast Flow-line Handle Heavy Gauge, Reinforced Stainless Steel Finished Work Top With Drip Guard, Marine Edge One Piece Magnetic Snap-In Drawer Gaskets Automatic, Energy Saving, Non-Electric Condensate Disposal Non-CFC Polyurethane Foam Insulation Easy Glide, Self-Closing Heavy-Duty Drawers Adjustable 6" Stainless Steel Legs 10' Cord and Plug Attached Performance Tested Refrigeration System Utilizing Environmentally Safe R-134a Refrigerant Optional Features & Accessories Heavy-Duty Casters Special Electrical Remote Models Requirements Stainless Steel Pans Digital Thermometer Refrigeration System The self-contained refrigeration system is mounted within a side mounted housing, concealed behind a stainless steel louvered grille. Full length air grille allows for even air circulation to condensing unit. A Performance Rated, air-cooled, hermetically sealed, capillary type refrigeration system is installed in each model. Contained behind mullion are a plasticized finned coil and air circulating fans. Our unique air flow design allows the cabinet to be enclosed on both sides or, to be mounted flush against a wall. Our refrigeration system, fully charged with R-134a refrigerant, is designed to maintain F while operating with an unrestricted air supply in ambient temperature of 100 Fahrenheit. All condensate water is directed to a non-electric condensate vaporizer located in the compressor compartment, thus, no plumbing is required. A strict quality assurance team inspects all materials and components to certify that each model conforms to the most exacting standards. All models are performance tested for a minimum of 16 hours prior to crating. Cabinet Construction All materials are of top quality, and are assembled under rigid supervision conforming to strict quality assurance requirements. Case is of all metal welded construction and is internally supported and braced for rigid unit construction. Exterior cabinet back and bottom are of heavy gauge galvanized steel. Work top is constructed of heavy gauge polished stainless steel for durability. Cabinet design eliminates overlapping panels with raw edges. Interior corners are rounded with a 1/4" radius for cleaning ease. All cabinet joints and seams are vapor-tight sealed. Easily removable anti-sweat drawer heaters, concealed by a nonmetallic, non-conductive, high impact thermal breaker strip, eliminates condensation build-up on case front. Insulation All cabinet walls, top, and bottom have high density, Foamed-in-place, non-cfc polyurethane insulation. Drawer Construction Drawer fronts and backs are constructed of heavy gauge, polished stainless steel with heavy duty, safety grip, chrome plated handles. All drawer fronts are insulated with non-cfc polyurethane foam insulation. Full extension, lift-out type drawer frames are of heavy gauge, welded stainless steel mounted on heavy duty, easy glide, self closing drawer slides. Each drawer holds two 12" x 20" x 4" deep pans (not furnished). Self adjusting, full perimeter, magnetic snap-in gaskets guarantee a positive seal.

55 SPECIFICATIONS REFRIGERATORS DIMENSIONAL DATA Net Capacity (cu. ft.) Width, Overall (in.) 50 3 / / / / /8 Depth, Overall (incl. Hdls.) (in.) Depth, Body Only (Less Door(s)(in.) 33 5 / / / / / /8 Height, Overall (incl. 6" Legs) (in.) Drawers (Std.) "x20" Pans (Not Furnished) REFRIGERATION DATA Condensing Unit Size (H.P.) 1/5-1/4-1/3 - Capacity (BTU/HR)** ELECTRICAL DATA Cabinet Specifications 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 Condensing Unit Specs. 115/60/1-115/60/1-115/60/1 - Cabinet Amperes Total Amperes Power Supply Cord 10 Ft. Yes Yes Yes Yes Yes Yes SHIPPING DATA Height-crated (in.) Width-crated (in.) Depth-crated (in.) Volume-crated (cu.ft.) Weigh-crated (lbs.) F Evaporator, 90 Ambient DL1G-SS DL2G-SS DL3G-SS One Section Two Section Three Section Self-Contained Remote Self-Contained Remote Self-Contained Remote 35" 28 1 /2" 28 1 /2" 26" /2" SIDE VIEW 2 DL1G-SS FRONT VIEW DL2G-SS FRONT VIEW DL3G-SS FRONT VIEW A Division of National Refrigeration & A/C Products, Inc. 539 Dunksferry Road Bensalem, PA (800) Fax: (215) DLG305

56 Star Manufacturing International, Inc. ULTRA-MAX RADIANT CHAR-BROILERS Models 8124RCB, 8136RCB, 8148RCB & 8160RCB Features/Benefits: Heavy-Duty Ultra-Max Radiant Gas Char-Broilers are designed for the most demanding foodservice applications. Ultra-Max Char-Broilers deliver maximum performance and provide years of maintenance-free operation. Heavy duty, high strength steel radiant transfers maximum heat to steak, chicken, burgers, fish and other menu items. Our exclusive steel radiant with flavor enhancing grooves delivers more heat than traditional cast iron radiants and will not bend or crack due to thermal shock. Three year warranty on Star s exclusive steel radiants! 30% more cooking space with our high capacity design to meet all your back-of-the-house broiling needs. Available in 24, 36, 48 and 60 widths to fit any foodservice operation s space requirements. High performance 20,000 BTU straight tubular steel burners every 6 of width provide more heat to cook faster and sear in flavor, better heat distribution, and more sectional control. Heavy-Duty cast iron grates can be individually positioned (flat or slanted) to accommodate a variety of broiling needs. Plus, our grates are reversible with a thin side for searing and a thick side for more delicate menu items. Large capacity stainless steel water pan for easy clean up. Stainless steel, 5 high, tapered splash guard maintains cleanliness. Gas convertible in the field with conversion kit supplied with each char-broiler. Units are shipped Natural Gas. Cool to the touch stainless steel bull nose front provides knob protection and comfortable work zone. Heavy-duty four inch adustable legs to match the height of other Ultra-Max equipment in your line. Floor models available with custom equipment stands. Optional items include 7 extended plate shelf and round steel grates. Model 8136RCB Ultra-Max Radiant Gas Char-Broilers Applications: Ultra-Max radiant char-broilers are designed for high volume and reliability. Whether it s steak, chicken, hamburger, shish kabobs or other menu items; Star s heavy-duty Ultra-Max char-broilers will fullfill your back-of-the-house cooking requirements and more! Quality Construction: Ultra-Max line of radiant char-broilers feature stainless steel side panels, front panel, bull nose, drip pan, splash guard, and grease trough. Char-broilers have heavy-duty full polycarbonate graphic panel. Steel tubular burners every 6 with adjustable valves and standing pilot. Radiants are heavy-duty steel designed for maximum heat transfer and durablity. Cooking surface consists of heavy duty, cast iron grates adjustable to flat or slanted positions. Heavy-duty legs are 4 with a 1-5/8 adjustment. Warranty: Ultra-Max Radiant Char-broilers are covered by a one year parts and labor warranty. In addition, Star s steel radiant is warranted for 3 years! Model 8136RCB Shown with Optional Mobile Equipment Stand Star Manufacturing International Inc Sunnen Drive - P.O. Box St. Louis, MO Phone: (800) FAX: (800) S250/0012

57 Star Manufacturing International, Inc. Ultra-Max Radiant Gas Char-Broilers ULTRA-MAX RADIANT CHAR-BROILERS Models 8124RCB, 8136RCB, 8148RCB & 8160RCB Specifications Dimensions Model (A) (B) (C) Weight No. Width Depth Height No. Controls BTU Grid Area Installed Shipping Inches Inches Inches lbs lbs (cm) (cm) (cm) (kg) (kg) 8124RCB 24" 30-5/8" 18" 4 *80, sq. in (61) (77.8) (45.7) (3890 sq. cm) (78.9) (109.4) 23-7/8 x 25-1/4 8136RCB 36" 30-5/8" 18" 6 *120, sq. in (91.4) (77.8) (45.7) (5845 sq. cm) (108.9) (147.6) 35-7/8 x 25-1/4 8148RCB 48" 30-5/8" 18" 8 *160, sq. in (121.9) (77.8) (45.7) (7800 sq. cm) (142.4) (180) 47-7/8 x 25-1/4 8160RCB 60" 30-5/8" 18" 10 *200, sq. in (152.9) (77.8) (45.7) (9754 sq. cm) (175.1) (226.4) 59-7/8 x 25-1/4 *Units shipped Natural Gas but do include conversion kit for field conversion to LP gas. Typical Specifications Gas char-broiler is constructed of all stainless steel, front panel and sides. Units have 20,000 BTU natural and propane gas straight tubular stainless steel burner for every 6" (15.24 cm) of width and are controlled by an adjustable control valve and standing pilot. Steel radiant provides even heat distribution. Cooking surface is heavy duty cast iron grate type and is adjustable from flat to slanted. A stainless steel water pan, bull nose, 5 back splash are standard. Control knobs are protected by a stainless steel bull nose front. Char-broilers are supplied with heavy-duty 4" (10.2 cm) stainless steel high legs that have a 1-5/8" (4.5 cm) adjustment. Gas connection is 3/4" N.P.T. male with a convertible pressure regulator provided. Units are approved for installation in non-combustible locations and are UL Certified to NSF Standard 4 and Classified culus listed. Printed in the U.S.A. Star Manufacturing International Inc Sunnen Drive - P.O. Box St. Louis, MO Phone: (800) FAX: (800)

58 fi Star Manufacturing International, Inc. Features/Benefits: ULTRA-MAX SNAP ACTION GAS GRIDDLES Models 824TS, 836TS, 848TS, 860TS & 872TS Snap-Action thermostat control from 150 to 450 F provides accurate temperature control of +/- 10 of set point. Internal plate sensor accurately measures the temperature of the griddle plate 3/16 from the cooking surface for instant response to surface temperature change and fast recovery. Available in 24, 36, 48, 60 and 72 inch widths to meet your space and volume requirements. Highly polished 1 thick steel plate for superior heat distribution, fast recovery and energy efficient operation. Custom designed 30,000 BTU steel burner every 12 of cooking surface provides superior cooking performance. Euro-style design with stylishly curved, ergonomically advanced front panel providing easy access and viewing of controls. Safety pilot with auto-shut off for added safety. Heavy-duty all-weld body construction with stainless steel front, side panels, bull nose and splash guard. Spatula wide 3-1/2 front grease trough and grease chute for easier cleaning. Large 6 quart stainless steel grease drawer. Extra-heavy 4 adjustable legs to fit your countertop needs. Floor model stands available for free standing unit. Optional casters available. Model 848TS Ultra-Max Gas Griddles Applications: Ultra-Max griddles provide high volume operations with precise control of griddle temperature and supply operators with a wide range of temperture levels in the kitchen. Construction: Ultra-Max griddles feature 1 thick highly polished steel griddle plate with 5 tapered stainless steel splash guard and 3-1/2 wide front access grease trough with 6 quart grease drawer capacity. Models 860TS and 872TS house two 6 quart grease drawers. Includes a 30,000 BTU aluminized steel burner every 12 of width controlled by snap-action (120V) control valve, 3/4 N.P.T. male gas connection with convertible pressure regulator, and 4 adjustable legs. These units are approved for installation within 6 of combustible surfaces. Model 836TS Shown with Floor Stand Warranty: Ultra-Max gas griddles are covered by Star s one year parts and labor warranty. Star Manufacturing International Inc Sunnen Drive - P.O. Box St. Louis, MO Phone: (800) FAX: (800) S253/0012

59 Star Manufacturing International, Inc. Ultra-Max Gas Griddles ULTRA-MAX SNAP ACTION GAS GRIDDLES Models 824TS, 836TS, 848TS, 860TS & 872TS A B C Specifications Dimensions Model (A) (B) (C) No. Plate Approximate Weight No. Width Depth Height Controls BTU Grid Area Thickness Installed Shipping Inches Inches Inches 824TS 24" 32-3/8" 18" 2 60, sq. in. 1" 222 lbs. 250 lbs. (61 cm) (82.2 cm) (45.7 cm) (3,697sq cm) (2.54 cm) (100.6 kg) (113.3 kg) 836TS 36" 32-3/8" 18" 3 90, sq. in. 1" 333 lbs. 375 lbs. (91.4 cm) (82.2 cm) (45.7 cm) (5,545 sq cm) (2.54 cm) (150.9 kg) (169.9 kg) 848TS 48" 32-3/8" 18" 4 120, sq. in. 1" 444 lbs. 500 lbs. (121.9cm) (82.2 cm) (45.7 cm) (7,394 sq cm) (2.54 cm) (201.2 kg) (226.6 kg) 860TS 60" 32-3/8" 18" 5 150, sq. in. 1" 555 lbs. 625 lbs. (152.4 cm) (82.2 cm) (45.7 cm) (9,242 sq cm) (2.54 cm) (251.5 kg) (283.2 kg) 872TS 72" 32-3/8" 18" 6 180, sq. in. 1" 666 lbs. 750 lbs. (182.9 cm) (82.2 cm) (45.7 cm) (11,091 sq cm) (2.54 cm) (301.8 kg) (339.8 kg) Typical Specifications Gas griddles are constructed of stainless steel, valve knobs are protected by a stainless steel bull nose front. Griddle plate is a 1 (2.54 cm) thick highly polished steel plate with 5 (7.6 cm) high tapered wrap-around stainless steel splash guard. Unit has 3-1/2 (8.3 cm) wide front grease trough with grease chute and a 6 qt. (5.68 L) capacity stainless steel grease drawer. Models 860TS and 872TS house two each 6 quart grease drawers. Units are equipped with a 30,000 BTU aluminized steel burner for every 12 (30.5 cm) of width and are controlled by a snap action control valve (110V) with an automatic safety pilot and 3/4 N.P.T. male gas connection with a convertible pressure regulator. Griddles are supplied with 4 (10.2 cm) high stainless steel legs that have a 1-5/8 (4.5 cm) adjustment. Units are approved for installation within 6 (15.2 cm) of combustible surfaces and are culus Classified and UL Classified to NSF Standard 4 Sanitation. Printed in the U.S.A. Star Manufacturing International Inc Sunnen Drive - P.O. Box St. Louis, MO Phone: (800) FAX: (800)

60 Item # C.S.I. Section VC4G SERIES SINGLE DECK GAS CONVECTION OVENS VC4GD Solid state temperature controls adjust from 150 to 500 F. 60 minute timer with audible alarm. VC4GC Computer controls with digital time and temperature readouts. 99-hour timer with audible alarm. Roast and Hold cycle. Six preset menu selections. Shelf I.D. programming. Model VC4GD SPECIFICATIONS: Single section gas convection oven, Vulcan-Hart Model No. (VC4GD) (VC4GC). Stainless steel front, sides and top. Painted legs. Independently operated stainless steel doors with double pane windows. Non-sag insulation applied to the top, rear, sides, bottom and doors. Porcelain enamel on steel oven interior measures 29"w x 22 1 /8"d x 20"h. Two interior oven lights. Five nickel plated oven racks measure 28 1 /4" x 20 1 /2". Eleven position nickel plated rack guides with positive rack stops. One 44,000 BTU/hr. burner. Electronic spark igniter. Furnished with a two speed 1 /2 H.P. oven blower-motor. Oven cool switch for rapid cool down. 120 volt, 60 Hz, 1 ph power supply required. 6' cord and plug. 9 amps total draw. Exterior dimensions: 40"w x 42 1 /4"d x 56 3 /4"h on 25 3 /4" legs. Depth measurement includes door handles. CSA design certified. NSF listed. SPECIFY TYPE OF GAS WHEN ORDERING. SPECIFY ALTITUDE WHEN ABOVE 2,000 FT. STANDARD FEATURES Stainless steel front, sides and top. Painted legs. Independently operated stainless steel doors with double pane windows. 44,000 BTU/hr. burner. Electronic spark igniter. 1 /2 H.P. two speed oven blower-motor. 120/60/1 with 6' cord and plug. 9 amps. Oven cool switch for rapid cool down. Porcelain enamel on steel oven interior. Five nickel plated oven racks with eleven rack positions. 3 /4" rear gas connection with combination gas pressure regulator and safety solenoid system. One year limited parts and labor warranty. OPTIONS Stainless steel legs. Casters. Five hour timer in place of 60 minute timer (Model VC4GD). Roast & Hold control (Model VC4GD). Stainless steel open stand with storage rack. Second year extended limited parts and labor warranty. ACCESSORIES Stainless steel rear enclosure. Extra oven rack(s). Rack hanger. Stainless steel drip pan. Flexible gas hose with quick disconnect and restraining device. Consult price book for available sizes. Down draft flue diverter for direct vent connection. Stacking kit. A2780 ISO9001 Vulcan-Hart Co. MODEL: VC4G SERIES Single Deck Gas Convection Ovens F (03-08) VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL QUOTE & ORDER FAX:

61 VC4G SERIES SINGLE DECK GAS CONVECTION OVENS IMPORTANT 1. A combination gas pressure regulator and safety solenoid system is included in this unit. Natural gas is 3.5" W.C., Propane gas is 10.0" W.C. 2. An adequate ventilation system is required for commercial cooking equipment. Information may be obtained by writing to the National Fire Protection Association, Batterymarch Park, Quincy, MA When writing, refer to NFPA No These units are manufactured for installation in accordance with ANSZ223.1 (latest edition), National Fuel Gas Code. Copies may be obtained from American Gas Association Inc., Accredited Standards Committee Z223, 400 N. Capitol St. NW, Washington, DC or the Secretary Standards Council, NFPA, 1 Batterymarch Park, Quincy, MA Clearances: Combustible Non-combustible Rear 2" 2" Right Side 4" 4" Left Side 1" 0" 5. This appliance is manufactured for commercial installation only and is not intended for home use. APPROX. DEPTH (INCLUDES BTU/HR. TOTAL SHP. WT. MODEL NO. WIDTH HANDLES) HEIGHT PER OVEN BTU/HR. ELECTRICAL LBS. KG VC4G 40" 42 1 /4" 56 3 /4" 44,000 44, /60/ NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and specifications without notice. F (03-08) VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL QUOTE & ORDER FAX: Printed On Recycled Paper

62 STAINLESS STEEL HAND SINKS STANDARD SPLASH MOUNTED FAUCETS Wrist Handles Item #: Qty #: Model #: Project #: 7-PS-60 7-PS-68 DECK MOUNTED FAUCET Keyhole Bracket for easier installation and greater stability. 7-PS-50 SINGLE HOLE PUNCH Faucet omitted 7-PS-67 7-PS-20 DOUBLE HOLE PUNCH Faucet omitted FEATURES: One piece Deep Drawn sink bowl design. Sink bowl is 10" x 14" x 5". (7-PS-45 sink bowl size is 16" x 20" x 8") All sink bowls have a large liberal radii with a minimum dimension of 2" and are rectangular in design for increased capacity. Keyhole wall mount bracket. Stainless steel basket drain 1-1/2" IPS. Specific Features: 7-PS-50 features lever operated drain and built-in overflow with plastic overflow tube and spring clamps. P-Trap is 1 1/2". 7-PS-20 4" O.C. deck mounted centerset faucet furnished with aerator. 7-PS-50 & 7-PS-60 4" O.C. splash mounted gooseneck faucet, chrome plated & furnished with aerator. 7-PS-45 Same as above plus 2 Support Brackets (Hardware Included). 7-PS-67 features lever operated drain. 7-PS-68 4" O.C. splash mounted gooseneck faucet with Wrist Handles, chrome plated & furnished with aerator. 7-PS-71 7-PS-45 7-PS-70 LARGE SIZE SINK BOWL Features Large Size Sink Bowl 16" x 20" x 8" CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. Die formed Countertop Edge with a No-Drip offset. One sheet of stainless steel - No Seams. MATERIAL: Heavy gauge type 304 series stainless steel. Wall mounting bracket is Galvanized and of offset design. All fittings are brass / chrome plated unless otherwise indicated. MECHANICAL: Faucet supply is 1/2" IPS male thread hot and cold. Standard Faucet conforms to NSF 61 Standard 9. An optional faucet upgrade is required for compliance to AB 1953 Standards. For Replacement Faucets & Upgrades, Drains & Accessories visit our website at Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) B-1

63 DIMENSIONS and SPECIFICATIONS TOL Overall: ±.500" Interior: ±.250" FITTINGS SUPPLIED AS SHOWN ALL DIMENSIONS ARE TYPICAL 7-PS /4" 10" 17 1/4" 2" TOP VIEW FOR: 7-PS-50 7-PS-60 7-PS-68 7-PS /4" 17 1/4" 2" 14" 13" 8" 5" 2" Faucet 7-PS-50 Sink Bowl 10" x 14" x 5" Gooseneck Faucet 15 lbs. 7-PS-67 13" 8" 5" 2" 17 1/4" 2" Lever Drain 15 1/4" 15 lbs. P-Trap 13" 8" 2" Gooseneck Faucet 7-PS-60 13" 8" 5" Gooseneck Faucet 2" 5" 13 lbs. 15 lbs. Lever Drain 7-PS-68 Gooseneck Faucet With Wrist Handles 7-PS /4" 2" 13" 8" 2" 5" 21 7/8" 16" 13 lbs. 20" Gooseneck Faucet 7-PS-70 7-PS-71 Same as 7-PS-70 with Single Hole Cutout 16" 8" 2" 13" C L 13" 3 5/8" 8" 2" 31 lbs. 5" 12 lbs. B-1a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, APRIL 2010

64 72" SANDWICH UNIT REFRIGERATORS SW72-30M SW72-12 SW72-18 SW72-18 Models Available SW72-12C SW72-18C SW72-18M SW72-27M SW72-30M Utilizing Environmentally Safe, CFC-free R-134a Refrigerant Standard Features Unique Air Flow Distribution Allows Pan Product to Maintain F Being in Compliance with and Certified Under the 98 NSF Standard For Preparation Units. Modern, State-of-the-Art Styling Performance Rated Refrigeration System Utilizing Environmentally Safe R-134a Refrigerant Easily Serviceable Back Mounted Compressor 2" Non-CFC Polyurethane Foam Insulation Spring Loaded, Self Closing Door Magnetic Snap-In Gasket 5" Casters, two with brakes, two without brakes Heavy-Duty, Epoxy-Coated Steel Shelves Interior Hanging Thermometer Full Length Nylon Cutting Board Cabinet Construction Consisting of Stainless Steel Front and Top, Aluminum End Panels, Case Back and Interior Non-Corrosive, Plasticized Fin Evaporator Coil Completely Enclosed, Vented and Removable Case Back Automatic, Energy Saving, Non-Electric Condensate Disposal 1/6 Size Pans, 4" Deep 10 ft Cord and Plug Attached Optional Features & Accessories Legs Remote Models R Stainless Steel End Panels- SA Models Stainless Steel Interior & Exterior-SS Models Stainless Steel Finished Back in Lieu of Aluminum Stainless Steel Roll Out Drawers in Lieu of Doors-D Models Electric Condensate Pan Opening Sizes Stainless Steel Legs Additional Shelves Door Locks Single Overshelf Double Overself

65 72" SANDWICH UNIT REFRIGERATORS SPECIFICATIONS SW72-12 SW72-18 SW72-12C SW72-18C SW72-18M SW72-27M SW72-30M DIMENSIONAL DATA Net Capacity (cu. ft.) / 6 Size Pans Width, Overall (in.) Depth, (incl. Hdls.& Bumpers) (in.) Depth, Body Only (Less Door(s)(in.) 27 1 / / / / / / /2 Depth, Cutting Board (Std. Top) Height, Overall (incl. 5" Casters) (in.) 42 3 / / / / / / /8 Shelf Area (sq. ft.) No. of Shelves No. of Doors Condensing Unit Size (H.P.) 1 / 4 1 / 4 1 / 4 1 / 4 1 / 4 1 / 4 1 / 4 Refrigerant R134a R134a R134a R134a R134a R134a R134a Cabinet Electrical 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 Amps Fans Interior Depth (in.) Interior Height (in.) 26 1 / / / / / / / 4 Interior Width (in.) Shipping Weight (lbs.) Shipping Height (in.) 43 1 / / / / / / / 4 Shipping Length (in.) 80 1 / / / / / / / 4 Shipping Depth (in.) /8 FRONT VIEW Standard Top Side View C -Top Side View M -Top Side View SW72-12 SW72-18 SW72-12C SW72-18C SW72-18M SW72-27M SW72-30M A Division of National Refrigeration & A/C Products, Inc. 539 Dunksferry Road Bensalem, PA (800) Fax: (215) SAND907

66 STAINLESS STEEL & ALUMINUM WALL SHELVES KD Wall Shelf Item #: Qty #: Model #: Project #: FEATURES: Furnished with a 1 1/2 sanitary rolled rim with a 1-1/4 turn-up edge on sides and rear. Unit is easily assembled employing the slip-fit TAB-LOK design. CONSTRUCTION: Shelf and brackets are die stamped and die formed. MATERIAL: WS-KD Series - 18 gauge stainless steel polished to a satin finish. AWS-KD Series - Heavy gauge aluminum. Requirements for NSF Installations 1. Install at least 60 above floor. 2. Limit to dry storage. 3. Avoid contact with liquids. 4. For Ganging-Up installation, allow at least 2 between units or mount units side by side and seal joints with an approved sealant. S/S ALUMINUM length WS-KD-24 WS-KD-36 WS-KD-48 WS-KD-60 AWS-KD-24 AWS-KD-36 AWS-KD-48 AWS-KD Standard Wall Shelf Furnished with a 1 1/2 sanitary rolled rim with a 1-1/2 turn-up edge at rear. Ends are turned down square. 18 gauge type 430 stainless steel. Secured to wall by means of bolts through support brackets. Brackets can be positioned to accomodate wall studs. Units 7 ft. and larger are furnished with 3 brackets. 10 Qty 12 Qty 15 Qty 18 Wide Wide Wide Wide WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS WS Qty Length = 24 to 144 in 12 increments. Width A USE TA-49 For Wall Shelf Offset 2" WALL Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DEC L-5

67 STAINLESS STEEL DISHTABLES SOIL STRAIGHT NEW Tile Edge Design Item #: Qty #: Model #: Project #: 10-1/2 EXTRA LARGE Bold Looking Backsplash with 2 return and tile edge ACCESSORIES Model # Qty Faucet Wall Shelf Undershelf SPEC-LINE DTS-S30-60L Shown Spec-Line: 14 ga. 304 Series Stainless Steel Top. 16 ga. 304 Stainless Steel Legs Stainless Steel Legs with Welded Cross Bracing & Stainless Steel Bullet Feet. UPGRADED! 16 ga. 304 Series Stainless Steel Top. Standard: 16 ga. 304 Stainless Steel Legs Stainless Steel Legs with Welded Cross Bracing & Stainless Steel Bullet Feet. Super Saver: 16 ga. 304 Series Stainless Steel Top. Galvanized Legs with Plastic Bullet Feet. FEATURES: Tile edge for ease of installation. STANDARD & SUPERSAVER SOIL section features 5 deep sink bowl. SPEC-LINE SOIL section features 8 deep sink bowl. Dishtable system consists of SOIL and CLEAN sections. Table is furnished with 10-1/2 splash with a 2 return. CONSTRUCTION: All TIG welded. Welded areas blended to match adjacent surfaces and to a satin finish. Stainless Steel Gussets welded to a stainless steel support channel. MECHANICAL: Faucet holes in SPLASH punched on 8 centers, faucet not included. Waste drain is 1 1/2 IPS basket type and is included. 14 Gauge 304 TOP 16 Gauge 304 TOP 16 Gauge 304 TOP 16 Ga. Stainless Steel Legs Stainless Steel Legs Galvanized Legs Nominal sizing on all dishtables for ease of installation. Nominal Size 3 Ft. 4 Ft. 5 Ft. 6 Ft. 7 Ft. 8 Ft. 9 Ft. 10 Ft. 12 Ft. L SPEC-LINE STANDARD SUPER SAVER DTS-S30-36L or R DTS-S30-48L or R DTS-S30-60L or R DTS-S30-72L or R DTS-S30-84L or R DTS-S30-96L or R DTS-S30-108L or R DTS-S30-120L or R DTS-S30-144L or R DTS-S70-36L or R DTS-S70-48L or R DTS-S70-60L or R DTS-S70-72L or R DTS-S70-84L or R DTS-S70-96L or R DTS-S70-108L or R DTS-S70-120L or R DTS-S70-144L or R DTS-S60-36L or R DTS-S60-48L or R DTS-S60-60L or R DTS-S60-72L or R DTS-S60-84L or R DTS-S60-96L or R DTS-S60-108L or R DTS-S60-120L or R DTS-S60-144L or R Approx. Wt. 70 lbs. 85 lbs. 100 lbs. 115 lbs. 125 lbs. 135 lbs. 235 lbs. 290 lbs. 300 lbs. Customer Service Available To Assist You :30 am - 8:00 pm E.S.T. Orders To: customer@advancetabco.com. For Smart Fabrication Quotes, To: smartfab@advancetabco.com or Fax To: NEW YORK GEORGIA TEXAS NEVADA Fax: (631) Fax: (770) Fax: (972) Fax: (775) P-1

68 TOL ±.500 DIMENSIONS and SPECIFICATIONS ALL DIMENSIONS ARE TYPICAL SEE DISH MACHINE COMPATIBILITY CHART TO ENSURE PROPER FIT Dish Machine Compatibility Chart can be found on our website at under Product Support 2" L 20" 6" DISH MACHINE 6" 20" L 2" 30" 20" 21 3/8" 21 3/8" 20" 30" 1 1/2" 1 1/2" STRAIGHT SOIL LEFT OPERATOR STRAIGHT SOIL RIGHT 1 1/2" SPEC-LINE 26 1/2" 2" STANDARD & SUPER SAVER 1 1/2" 26 1/2" 2" 3" 20x20x8" Sink 10 1/2" Faucet LC 3" 20x20x5" Sink 10 1/2" LC 34" Cross Brace 37" 44 1/2" 34" Cross Brace 44 1/2" 37" 10" (Standard Series Only) 10" LC 17" LC 17" CUSTOMIZE YOUR OWN SYSTEM by Ordering Optional Accessories from our PRODUCT & PRICE GUIDE Splash Detail Description SPEC-LINE STANDARD SUPER SAVER Material 1 5/8 Dia. Legs Gussets Bullet Feet (1 adj.) Cross Bracing Prerinse Bowl Depth Prerinse Basket 14 Ga. 304 Series Stainless Steel Stainless Steel Stainless Steel Welded 8 Included 16 Ga. 304 Series Stainless Steel Stainless Steel Stainless Steel Welded 5 Optional 16 Ga. 304 Series Galvanized Stainless Steel Plastic Optional 5 Optional P-1a 200 Heartland Boulevard, Edgewood, NY ADVANCE TABCO is constantly engaged in a program of improving our products. Therefore, we reserve the right to change specifications without prior notice. ADVANCE TABCO, DECEMBER 2009

69 GRIDDLE STAND FREEZERS DL1GF-SS DL2GF-SS Standard Features Modern State-of-the-Art Styling Performance Rated Refrigeration System Utilizing Enviromentally Safe R-404A Refrigerant Automatic, Energy Saving, Non-Electric Condensate Disposal System High Density, Non-CFC Polyurethane Foamed- In-Place Insulation Easily Accessible and Serviceable Front Slide- Out Condensing Unit Stainless Steel Exterior and Interior Plasticized Fin Coil Capillary Dial Thermometer Anti-Sweat Drawer Heaters Chrome-Plated Hardware Heavy-Duty Diecast Flowline Handle Heavy Gauge (20), Reinforced Stainless Steel Finished Work Top with Drip Guard, Marine Edge One Piece Snap-In Magnetic Gaskets Easy Glide Drawes Heavy Duty Drawer Track Adjustable 6'' Stainless Steel Legs Models Available DL1GF-SS DL2GF-SS Optional Features & Accessories Heavy-Duty Casters Special Electrical Remote Models Requirements Stainless Steel Pans Digital Thermometer Utilizing Environmentally Safe, CFC-free R-404A Refrigerant

70 Griddle Stand Freezers SPECIFICATIONS DIMENSIONAL DATA Net Capacity (cu. ft.) Width, Overall (in.) 50 3 / / / /4 Depth, Overall (incl. Hdls.) (in.) Depth, Body Only (Less Door(s)(in.) 33 5 / / / /8 Height, Overall (incl. 6" Legs) (in.) Drawers (Std.) "x20" Pans (Not Furnished) REFRIGERATION DATA Condensing Unit Size (H.P.) 1 /4-1 /3 - Capacity (BTU/HR)* ELECTRICAL DATA Cabinet Specifications 115/60/1 115/60/1 115/60/1 115/60/1 Condensing Unit Specs. 115/60/1-115/60/1 - Cabinet Amperes Total Amperes Power Supply Cord 10 Ft. Yes Yes Yes Yes SHIPPING DATA Height-crated (in.) Width-crated (in.) Depth-crated (in.) Volume-crated (cu.ft.) Weigh-crated (lbs.) * -15 F Evaporator, 90 Ambient DL1GF-SS DL2GF-SS One Section Two Section Self-Contained Remote Self-Contained Remote 35" 31 1 /2" 28 1 /2" 26" /2" SIDE VIEW 2 DL1GF-SS FRONT VIEW DL2GF-SS FRONT VIEW A Division of National Refrigeration & A/C Products, Inc. 539 Dunksferry Road Bensalem, PA (800) Fax: (215) DLGF706

71 Project: Item No. Quantity: Model No.: Built-In (Flush-Mount) Induction Range: Model SR-261R Shown Model: SR-181R (110-Volt/US)_ SR-261R (208/220-Volt/US)_ SR-263R (220/240-Volt/Int.) Order Guide: Model Number Voltage Peak Power Plug Type SR-181R [US] Watts NEMA 5-15 SR-261R [US] Watts NEMA 6-20 SR-263R [Int.] Watts EC or BS Short Form Specification: Unit to be a Spring USA Mr. Induction : SR- [Specify: 181, 261 or 263] R Model Built-In, Flush Mountable Induction Range, with installation-ready modular flanged base with 5 mm thick tempered glass cook top; and separate control panel and 36 (915 mm) cable with SmartScan technology providing: voltage, pan size and type recognition, choice of power or temperature mode, Ferris pan recognition, large LED power/temp display; plus all the features listed. Construction & Performance Features: Sealed induction base with flanged cooking surface, for easy drop-in mounting Separate, control panel with 36 (915 mm) cable for easy front mounting Rugged 5 mm thick, easy to clean tempered glass cook top 100% silicon rubber protective top seal 110-volt model has 1800 Watts of Power [Industry s highest] SmartScan Process Controller (PC) adjusts for voltage, pan size & pan type Choice of cooking to: Power Level (1-20) or Temperature (90-440º F) 6 (1.82m) power cord with plug standard Solid State SmartScan PC Controls with: Power-ON/OFF touch pad Power ON/Pan-Present indicator light Simple knob-set thermostat control Digital LED display of: Power level: from 1 to 20 [Cook Mode] Temperature: º F [Temp Mode] Cook/Temp Mode touch pad Cook & Temp Mode indicator lights Over/Under Voltage protection standard Durable matt-finish control panel overlay Standard Warranty: One Year, Parts & Labor Agency Listings: FCC ETL ETL-Sanitation to NSF-4 CETL Available Accessories / Alternative Configurations: Universal flush mounting flange/adaptor plate [P/N: AP1826] (For installation without routing solid surface material) Induction-ready pans [See Spring USA Catalog] AF350 Under-counter Air Filter System [See Spec. SIR-8] Built-In (Hold-Only) Induction Hot Plate [See Spec. SIR-4] Countertop, Portable Induction Ranges [See Spec. SIR-1] Countertop (Hold-Only) Induction Hot Plate [See Spec. SIR-2] Mobile & Custom Configurations [Contact Spring USA] Spring USA Corporation 127 Ambassador Drive, Suite 147 Naperville, IL USA Fax: SIR-3 [Issued 4/08]

72 Project: Item No. Quantity: Model No.: Built-In (Flush-Mount) Induction Range: Model: SR-181R (110-Volt/US)_ SR-261R (208/220-Volt/US)_ SR-263R (220/240-Volt/Int.) SIDE VIEW FRONT VIEW TOP VIEW CONTROL PANEL CUTOUT 2.75 H x 5 W RANGE CUTOUT D x W [EC] Electric Requirements: Model Voltage Phase Hertz Watts Amps Plug Receptacle SR-181R AC NEMA 5-15P NEMA 5-15R SR-261R AC 1 50 or NEMA 6-20P NEMA 6-20R SR-263R AC Key Dimensions & Shipping Information: Notes & Conditions of Use: 1. This induction range must be flush mounted (by others) in a heat resistant countertop (2 /51 mm thick maximum) or base cabinet with the control module mounted vertically on the front of that enclosure. [See cutout dimensions above.] 2. For optimum performance, allow 4 (102 mm) clearance front and sides and 7 (178 mm) below unit for good air circulation. 3. This induction range requires use of Ferris metal, induction-ready cookware. EC Schuko (CEE7/7) or BS 1363 (YP-60) Single Unit Shipping Carton* All Models Unit Width Unit Depth Unit Height Weight* Width Depth Height SR-181R Unit: 11 lbs (5 kg) SR-261R *Shipping: 13 lbs (321 mm) (340 mm) (112 mm) (559 mm) (483 mm) (191 mm) SR-263R (5.9 kg) * Two Unit Case Pack: Weight = 29 lbs. (13.1 kg); Length = 22 (559 mm) Width = 19 (483 mm); Height = 15 (381 mm) Due to continuous product improvement, specifications are subject to change without notice Optional Adapter Plate TOP VIEW CAD Symbols & Pricing: Spring USA Corporation 127 Ambassador Drive, Suite 147 Naperville, IL USA Fax: SIR-3 [Issued 4/08]

73 W E L L S M A N U F A C T U R I N G I T E M N O. BMW-206ULST BUILT-IN FOOD WARMER Wells BMW-206ULST built-in square corner warmer is designed for quick and easy bottom mount installation, providing an unobstructed, clean countertop. These dependable units have square corners and are made with heavy-duty stainless steel. They are fully insulated and will accommodate a standard 12 x 20 steam table pan up to six inches deep. Specifications Overall Dimensions: Inches MM Width 13 11/ Depth 21 13/ Temperature Settings: OFF/LO to HI Weights: Lbs. KG Installed 18 8 Shipping Accessories BMW-206ULST Adapter Top, to convert warmer to hold two 7-quart insets, Adapter Top, to convert warmer to hold two 4-quart insets and two 2 1/2-quart insets, Adapter Top, to convert warmer to hold one 7-quart and one 11-quart inset, BMW-206ULST BUILT-IN FOOD WARMER Features Warming pan is deep drawn, stainless steel for maximum strength and durability. Control is recessed in a one piece, die stamped stainless steel, remote panel to help prevent accidental temperature changes. The tubular element, located under the warming pan, allows for quick heating. The positive-off thermostat (T) controls the element allowing for adjustable and more consistent temperatures. A signal light indicates that the heating element is energized. Fully insulated for greater efficiency. Warmers are designed for wet or dry operation. Models available with optional drain (D). The BMW-206ULST warmer is Underwriter s Laboratories, Inc. LISTED and meets NSF International and Canadian standards. A one-year warranty against defects covers parts and labor. Adapter Top, to convert warmer to hold three 4-quart insets, Adapter Top, to convert warmer to hold four 2 1/2-quart insets, Adapter Top, to convert warmer to hold one 4-quart and one 7-quart inset, Inset, 2 1/2-quart capacity with lid, Inset, 4-quart capacity with lid, Inset, 7-quart capacity with lid, Inset, 11-quart capacity with lid, Optional Drain (D) is available Drain Valve Extension Kit, extension from drain to counter front with remote handle, for use with D models only, WELLS

74 R W E L L S M A N U F A C T U R I N G R LISTED E6070 STD.4 C R LISTED E6070 D I M E N S I O N S : 12 1/16 (306) INCH (MM) M O D E L B M W U L S T B U I LT- I N WA R M E R MINIMUM CLEARANCE FROM UNIT TO THE NEAREST SURFACE BACK SIDE BOTTOM FRONT /4 4 1/8 (25) (25) (171) (105) 20 3/32 (510) 21 13/16 (554) 13 11/16 (348) 4 1/8 (105) 8 5/16 (211) 6 1/4 (159) 5 5/8 (143) 5 7/8 (149) 1/2 IN DRAIN NPT BMW-206ULSTD ONLY B M W U L S T E L E C T R I C A L S P E C I F I C AT I O N S : MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD BMW-206ULST SINGLE NONE BMW-206ULST SINGLE NONE BMW-206ULST SINGLE NONE All models with a 'D' suffix have the same electrical specifications as the standard versions. NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit. This document is not for installation purposes. THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY WELLS MANUFACTURING COMPANY 2 ERIK CIRCLE, PO BOX 280, VERDI, NV U.S.A. USA PHONE: (775) FAX: (775) FOR ORDERS ONLY: (888) FAX: (800) WELLS MANUFACTURING PRINTED IN THE U.S.A. 03/02 REV(A) PART NO

75 W E L L S M A N U F A C T U R I N G I T E M N O. ICE-COOLED COLD PANS ICP-3OO Wells Ice-Cooled Cold Pans are designed to be easy-to-use. Pre-chilled products are held at serving temperature. Located in the center of each unit is a drain, which allows for easy clean-up. Perforated strainer plate prevents the drain from clogging. Specifications Overall Dimensions: Inches MM Width ICP /8 441 ICP ICP / ICP / ICP / ICP Depth 25 3/8 645 Height Weights: Lbs. KG ICP-100 series: Installed Shipping ICP-200 series: Installed Shipping ICP-300 series: Installed Shipping ICP-400 series: Installed Shipping ICP-500 series: Installed Shipping ICP-600 series: Installed Shipping Features Drop-in, ice cooled display cold pans are designed to hold pre-chilled products at serving temperature. Perforated bottom strainer plate conveniently holds ice above drain to prevent clogging. Each pan has a large 1-inch drain located in the center for easy cleaning. Recessed top edge lowers inset pan to keep food colder and fresher. Adapter bars are included with each unit to allow use of a variety of different sized pans. Each pan is heavy duty, stainless steel for maximum strength and durability. The ICP series Ice-Cooled Pans meet the National Sanitation Foundation standard 2. A one-year warranty against defects covers parts and 90-day labor. Accessories / Options Adapter Bar, for 12 x 20 pans, Perforated Bottom Strainer Plate, for ICP-100 (one piece), Perforated Bottom Strainer Plate, for ICP-200 (one piece), Perforated Bottom Strainer Plates, for ICP-300 (two pieces), Perforated Bottom Strainer Plates, for ICP-400 (two pieces), Perforated Bottom Strainer Plates, for ICP-500 (two pieces), Perforated Bottom Strainer Plates, for ICP-600 (three pieces), ICE-COOLED COLD PANS WELLS R A I S I N G T H E S T A N D A R D

76 R W E L L S M A N U F A C T U R I N G COMPONENT M O D E L S I C P TO I C P I C E C O O L E D C O L D PA N S D I M E N S I O N S : INCH (MM) B A 19 7/8 (505) 25 3/8 (645) 1 (25) 1/4 (6) 3/4 (19) 8 (203) 9 (229) 1" NPT DRAIN CENTERED IN PAN 1" HIGH REMOVABLE PERFORATED BOTTOM I C P TO I C P D I M E N S I O N S P E C I F I C AT I O N S : MODEL DIMENSION A DIMENSION B INCHES MM INCHES MM ICP /8 (302) 17 3/8 (441) ICP /2 (648) 31 (787) ICP /4 (997) 44 3/4 (1137) ICP (1346) 58 1/2 (1486) ICP /4 (1695) 72 1/4 (1835) ICP /2 (2045) 86 (2184) NOTE: Specifications are subject to change without notice. See installation instruction sheet prior to installing the unit. This document is not for installation purposes. WELLS MANUFACTURING COMPANY 2 ERIK CIRCLE, PO BOX 280, VERDI, NV U.S.A. USA PHONE: (775) FAX: (775) FOR ORDERS ONLY: (888) FAX: (800) A SPECIALTY EQUIPMENT COMPANY 2000 WELLS MANUFACTURING PRINTED IN THE U.S.A. 8/00 REV(C) PART NO WELLS

77 Item Number: Contempo Warmer Lamps 400, 500, 600, 700, 725, 750, 775 Models Shown (left to right) 750, 700, 500, 600, 775, 400, 725 Add a stylish touch to any foodservice operation available in a rainbow of high-gloss colors to match any decor. Electrical Requirements All models, available in 120 or 240 volts, single phase AC only. 120 volt; 250 watt, white infrared bulbs are standard. 120 volt, 250 watt, red; and 240 volt, 250 watt, red infrared bulbs are available at extra cost (240 volt bulbs are not UL or CSA listed.) Standard Features Merco Contempo Warmer Lamps offer graceful, dramatic styling to match any decor. They are made to exacting tolerances from heavyduty, solid, mandrel-spun aluminum for durability. They are available in a rainbow array of high-gloss colors including polished nickel and polished brass (traditional anodized satin-clear and satin-brass also available.) The long-life finishes are designed for easy cleaning and are unaffected by heat and grease vapors. All electrical components are heavy-duty on/off switches are standard on all models (except Type A and F with Trac-Heat ). Every shade style is available in all mounting styles with either standard Direct or Merco s unique Trac-Heat track mounting system (for the ultimate in flexible lamp placement and installation ease.) 1111 North Hadley Road P.O. Box 1229 Fort Wayne, IN Phone: (219) / Fax: (219) Toll Free Printed in USA, Designs and specifications are subject to change without notice 2001 Merco Products, Inc., All Rights Reserved

78 Contempo Warmer Lamps Shade Style Style 400- Style 500- Style 600- Style 700- Style 725- Style 750- Style 775-6" x 7.5" 6" x 7.5" 6.2" x 8" 6.4" x 7.3" 9.5" x 8" 11" x 7.3" 10.3" x 7.6" Dia. x Height Dia. x Height Dia. x Height Dia. x Height Dia. x Height Dia. x Height Dia. x Height Shade Color Note: All shade styles available in Black, White, Red, Polished Brass and Polished Nickel. Style 400 and 500 shades also available in Satin-Clear and Satin-Brass, Custom colors & Accents available (consult factory). Mounting Type 400, 500, 600, 700, 725, 750, 775 Merco Contemporary Warmer Lamps are made to your exact specifications. Precise dimensions must accompany your order to insure easy installation. Please refer to the illustration below and use the check-list below to specify your order. Shipping weight will range from 5 to 12 lbs. (2.3 to 5.5 kg). Note: Please pay particular attention to the 16" minimum clearance between lamp bottom and counter top surface. Type R Retractable Cord Mount Adjusts up and down to vary heat 30"-68.5" length Black cord standard Type S* Stem Mount Up to 71" stem length Connection Type C* Cord Mount Available in any length Black cord standard Type F* fixed Mount Up to 71" stem length Type A Adjustable Wall or Overhead Mount Adjusts to desired position Max. 17" length Specify the following information with your order 1 Shade style number (400, 725, etc.) 2 Mounting type code (R,S, etc.) 3 Electrical connection (add T suffix for Trac-Heat) 4 Shade color (see shade color note above at top of page) 5 Bulb color and voltage (red or white, 120V or 240V) 6 Unit length (from ceiling to bottom of warmer lamp shade) North Hadley Road P.O. Box 1229 Fort Wayne, IN Phone: (219) / Fax: (219) Toll Free For example You Want: Shade Style 725 (see #1) Mounting Type C (see #2) Connection T (see #3) You Order: Model 725-C(T), and give us your specifications (see #4, #5 & #6)

79 2001 East Terra Lane O Fallon, Missouri (636) Fax (636) (800) Intl Fax# (001) Parts Dept. (800)424-TRUE Parts Dept. Fax# (636) Model: TBB-24-48G TRUE FOOD SERVICE EQUIPMENT, INC. Underbar Refrigeration: Glass Swing Door 24" Back Bar Cooler Project Name: Location: Item #: Model #: Qty: AIA # SIS # TBB-24-48G True s refrigerated back bar coolers are designed with enduring quality and value. Our commitment to using the highest quality materials and oversized refrigeration assures colder product temperatures and years of trouble free service. Oversized, factory balanced, refrigeration system holds 33 F to 38 F (.5 C to 3.3 C). Exterior - heavy duty, wear resistant laminated black vinyl front and sides. Matching black aluminum back. All stainless steel counter top. Interior series stainless steel floor with 1/2" (13 mm) reinforced lip and heavy gauge galvanized steel walls. NSF-7 approved for packaged and bottled product. Positive seal doors. "Low-E", double pane thermal glass door assemblies with extruded aluminum frames. The latest in energy efficient technology. Patented integrated door light (IDL) system for brighter, shadow free illumination. Entire cabinet structure is foamedin-place using Ecomate. A new, innovative, high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Rough-In Data Specifications subject to change without notice. Chart dimensions rounded up to the nearest 1/8" (millimeters rounded up to next whole number). Model Doors Cabinet Dimensions Capacity 12 oz. 1/2 (inches) (mm) Cans Barrels Shelves L D H HP Voltage Amps NEMA Config. Cord Length (total ft.) (total m) TBB-24-48G pks /8 241/2 355/8 1/3 115/60/ P / /50/ Crated Weight (lbs.) (kg) Depth does not include 13/8" (35mm) and 1" (26 mm) for rear bumpers. Plug type varies by country. Approvals: Available At: Printed in U.S.A.

80 Model: TBB-24-48G Underbar Refrigeration: Glass Swing Door 24" Back Bar Cooler Standard Features DESIGN True s refrigerated back bar coolers are designed with enduring quality and value. Our commitment to using the highest quality materials and oversized refrigeration assures colder product temperatures and years of trouble free service. REFRIGERATION SYSTEM Factory engineered, self-contained, capillary tube system using environmentally friendly (CFC free) 134A refrigerant. Extra large evaporator coil balanced with higher horsepower compressor and large condenser; maintains cabinet temperatures of 33 F to 38 F (.5 C to 3.3 C). Sealed, cast iron, self-lubricating evaporator fan motor(s) and larger fan blades give True back bar coolers a more efficient low velocity, high volume airflow design. This unique design ensures faster temperature pull down of warm product, colder holding temperatures and faster recovery in high use situations. Condensing unit accessed from behind front grill, slides out for easy cleaning and maintenance. CABINET CONSTRUCTION Exterior - heavy duty, wear resistant laminated black vinyl front and sides. Matching black aluminum back. All stainless steel counter top. Interior series stainless steel floor with 1/2" (13 mm) reinforced lip and heavy gauge galvanized steel walls. Door threshold protector prevents damage to cabinet from routine loading of product. Insulation - entire cabinet structure is foamed- in-place using Ecomate. A new, innovative, high density, polyurethane insulation that has zero ozone depletion potential (ODP) and zero global warming potential (GWP). Plan View Welded, heavy duty steel frame rail, black powder coated for corrosion protection. DOORS "Low-E", double pane thermal insulated glass door assemblies with extruded aluminum frames. The latest in energy efficient technology. Each door fitted with 12" (305 mm) long extruded aluminum handle. Positive seal doors. Magnetic door gaskets of one piece construction, removable without tools for ease of cleaning. Door locks standard. SHELVING Four (4) adjustable, heavy duty, black PVC coated wire shelves 17 3/4"L x 18"D (451 mm x 458 mm). Four (4) chrome plated shelf clips included per shelf. Aluminum shelf support pilasters. Shelves are adjustable on 1/2" (13 mm) increments. LIGHTING Fluorescent interior lighting. Each door utilizes full-length, patented, integrated door light (IDL) system. Safety shielded. Cabinet lighting utilizes electronic ballast and T-8 bulbs for brighter illumination, longer bulb life and increased energy efficiency. MODEL FEATURES Evaporator is epoxy coated to eliminate the potential of corrosion. Designed to accommodate a variety of beer kegs. Listed under NSF-7 for the storage and/or display of packaged or bottled product. ELECTRICAL Unit completely pre-wired at factory and ready for final connection to a 115/60/1 phase, 15 amp dedicated outlet. Cord and plug set included. OPTIONAL FEATURES/ACCESSORIES Upcharge and lead times may apply V / 50 Hz. 6" (153 mm) standard legs. 6" (153 mm) seismic/flanged legs. 2 1/2" (64 mm) diameter castors. 4" (102 mm) diameter castors. Additional shelves. TrueTrac one liter or wine bottle organizers. TrueTrac 12 oz. (355 ml) bottle organizers. Remote cabinets (condensing unit supplied by others; system comes standard with 404A expansion valve and requires R404A refrigerant). Consult factory technical service department for BTU information. All remote units must be hard wired during installation. WARRANTY One year warranty on all parts and labor and an additional 4 year warranty on compressor. (U.S.A. only) METRIC DIMENSIONS ROUNDED UP TO THE NEAREST WHOLE MILLIMETER SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE KCL Model Elevation Right Plan 3D Back TBB-24-48G TFJX25E TFJX25S TFJX25P TFJX253 TRUE FOOD SERVICE EQUIPMENT 2001 East Terra Lane O Fallon, Missouri (636) Fax (636) (800) Intl. Fax# (001)

81 Nuova Distribution USA, LLC 6940 Salashan Parkway Building A Ferndale WA (p) (f) Oscar Pour Over/Direct Connect Pre-Installation Checklist Water Requirements/Water line for Direct Connect only 1/4 to 3/8 dedicated cold water line with shut-off valve and compression fitting. Water hardness cannot exceed 3gpg or 50ppm. If water hardness exceeds 3gpg a water softener must be installed. Minimum incoming water Flow Rate of 35 GPH and maximum line pressure 36 PSI / 2.5 BAR. (regulator not included) Water Softening Equipment 1. Water Softener Capacity: Single gpg 2. Water Softener Capacity: Double gpg 3. Water Softener Capacity: Triple gpg 4. Water Softener: Automatic - Programmable 5. Water Softener Capacity: Manual gpg Water Softener/Maintenance Calculation: Cartridge Grain Capacity Water Hardness Grains-per-Gallon = Gallon Capacity of Cartridge Power Requirements Volts: 110 (voltage range of ) Watts: 1200 Amp draw: 10 Receptical: Nema 5-15 Gallons Used per Day = Days Until Replacement Cartridge = = Counter-Space Requirements Nema 5-15 NSF/ANSI Std.4 Average water consumption of this machine is 1 gallons per day which represents 32 drinks per day at 4oz per drink 16 inches (height) 16 inches (depth) 12 inches (width) Counter-Top inches 16 inches 12 inches I the customer understand that these requirements must be in when the installer arrives. Failure to have the site ready will result in additional service and travel charges, and may cause further delays in installation. Customer Name: Signature: Company Name: Phone: Fax: Version 2.2

82 Project: Item #: Model #: Qty: AIA# SIS# Drainboards See reverse side for model number key DBA-18 with SSR-18 Standard Features All stainless steel construction Adjustable stainless steel bullet feet Exclusive design with drain pan and separate perforated insert for better air circulation One piece, seamless top and backsplash featuring 1/4 radius corners for easy cleaning Standard models available in 6 incremental lengths from 12 to 48 (Custom sizes also available) 24 deep models provide a larger drainboard storage area not just a deck extension on the back of 19 deep model All storage is on a level plane A 4 by 4 by 6-1/2 high tubing chase is available. Specify model number TC as an accessory Also available with flat stainless steel fillerboard top in lieu of drainboard top. Substitute an F for the D in the model number when ordering Specifications Drain 1 1/2 I.P.S. Threaded drain will fit Dearborn part #8033 slipnut and part #W-573P washer Legs 1-5/8 diameter, 16 gauge stainless steel Stainless steel bullet feet Materials 20 gauge stainless steel Glastender, Inc North Michigan Road Saginaw, MI Fax Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 3.09 Approval/Notes: Rev

83 Drainboards Dimensional Information A Depth-19 Deep Models Model DBA-18 shown DRAIN REMOVABLE PERFORATED INSERT BACKSPLASH 19" PLAN VIEW OPTIONAL SPEED RAIL 7" OVERALL LENGTH 19" Model Number Overall Length DBA DBA DBA DBA DBA DBA DBA " 30" 16" SIDE VIEW B Depth-24 Deep Models Model DBB-18 shown 1" ADJUSTMENT FROM 37" TO 38" FRONT VIEW DRAIN REMOVABLE PERFORATED INSERT BACKSPLASH 24" PLAN VIEW 7" OVERALL LENGTH 24" Model Number Overall Length DBB DBB DBB DBB DBB DBB DBB " 30" 16" SIDE VIEW 1" ADJUSTMENT FROM 37" TO 38" FRONT VIEW 5400 North Michigan Road Saginaw, MI Fax Printed in USA

84 Project: Item #: Model #: Qty: AIA# SIS# Combo Ice Bins CBA-36R-CP10 Standard Features See reverse side for model number key All stainless steel construction One-piece, seamless top and backsplash ABS plastic breaker strip around ice bin liner: creates 5/16 raised edge around liner, acts as thermal barrier to prevent heat transfer, and makes the cover slide easier Two tubing chase holes built-in to backsplash Available in 6 incremental lengths from 30 to deep version provides larger ice bin not just a deck extension on the back of the 19 deep model Sliding stainless steel cover CFC free foamed-in-place insulation Adjustable stainless steel bullet feet Ten circuit cold plate is available on units where the main ice bin liner is 22 or wider (add suffix -CP10 to model number) Combo Ice Bins combine separate draining ice bin and bottle well compartments into one integral unit. The fully insulated 12 bottle well comes with two wire racks for ice chilled storage of 6 or 8 bottles in 19 or 24 deep ice bins, respectively. The bottle well may be located on the left, right, or both sides of the ice bin. NOTE: Combo Ice Bins are not recommended for dry, room temperature storage of bottles - instead, higher bottle capacity Liquor Displays (see page 3.23) should be ordered Specifications Drain Non-cold plate model: 1-1/2 tailpiece Ten circuit cold plate model: 3/4 MPT Tubing Access Holes 7/8 by 2-7/8 (capacity per hole is 12 lines of 1/4 I.D. x 3/8 O.D. nylon braided tubing) Cover Two-piece sliding cover, 20 gauge stainless steel, included with all models Cold Plate Ten circuit available for 22 wide (main liner) and larger models only Connection is 5/16 O.D. stainless steel tubing with swaged end Liner Depth 10-1/2 standard 14-1/2 extra deep Ice Capacity A depth standard = 2.79 lbs X length A depth extra deep = 3.85 lbs X length B depth standard = 3.54 lbs X length B depth extra deep = 4.89 lbs X length Legs 1-5/8 diameter 16 gauge stainless steel Stainless steel bullet feet Materials 20 gauge stainless steel ABS plastic breaker strip around opening of ice bin liner Glastender, Inc North Michigan Road Saginaw, MI Fax Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 3.04 Approval/Notes: Rev

85 Combo Ice Bins Dimensional Information A Depth-19 Deep Models Model: CBA-36R-CP10 shown BACKSPLASH TUBING ACCESS HOLES 7" SLIDING COVER 10 1/2" 10 1/2" 19" DRAIN MAIN LINER LENGTH 15" COLD PLATE 37" COLD PLATE 30" 36" 1" ADJUSTABLE BULLET FEET 16" 2 - THREE BOTTLE BOTTLE RACKS Plan View Model Number Front Elevation Overall Length Main Liner length B Depth-24 Deep Models Bottle Well Location Side Elevation CBA-30 L or R Left or Right N/A Optional Cold Plate CBA-36 L or R Left or Right CP10 CBA Left and Right N/A CBA-42 L or R Left or Right CP10 CBA Left and Right CP10 CBA-48 L or R Left or Right CP10 CBA Left and Right CP10 CBA Left and Right CP10 Model: CBB-36R-CP10 shown 7" BACKSPLASH SLIDING COVER Plan view detailing two bottle well models Model: CBA-48-CP10 shown DRAIN 2 - THREE BOTTLE BOTTLE RACKS TUBING ACCESS HOLES MAIN LINER LENGTH 15" 2 - THREE BOTTLE BOTTLE RACKS TUBING ACCESS HOLES MAIN LINER LENGTH 10 1/2" 10 1/2" 24" 20" 30" 37" DRAIN Model Number 1" ADJUSTABLE BULLET FEET Front Elevation Overall Length Main Liner length Bottle Well Location CBB-30 L or R Left or Right N/A 5400 N Michigan Rd Saginaw, MI Fax Optional Cold Plate CBB-36 L or R Left or Right CP10 CBB Left and Right N/A Side Elevation CBB-42 L or R Left or Right CP10 CBB Left and Right CP10 CBB-48 L or R Left or Right CP10 CBB Left and Right CP10 CBB Left and Right CP10 16" Plan View 36" 2 - FOUR BOTTLE BOTTLE RACKS Plan view detailing two bottle well models Model: CBB-48-CP10 shown TUBING ACCESS HOLES DRAIN 2 - FOUR BOTTLE BOTTLE RACKS MAIN LINER LENGTH 20" 2 - FOUR BOTTLE BOTTLE RACKS Printed in USA

86 Project: Item #: Model #: Qty: AIA# SIS# Blender Stations BSA-12, BSA-14, BSA-18, BSB-12, BSB-14, BSB-18 Standard Features All stainless steel construction One-piece, seamless top and backsplash CFC free foamed-in-place blender shelf for sound deadening Adjustable stainless steel bullet feet 9-1/4 by 11-1/2 by 6 deep sink bowl with hot and cold water gooseneck faucet Lift-out plastic perforated sink strainer 1 recessed work surface on BSB- models Blender shelf features radius interior corners for easy cleaning Power cord access hole with grommet located on front skirt, behind the blender Junction box for duplex GFI outlet mounted underneath blender shelf (outlet not included) BSB-18 (Blender not included) NOTE: Blender stations cannot have a speed rail mounted to them. Since speed rails are so common on underbar, blender stations come in 24 and 29 depths to align with underbar that has a speed rail. Specifications Drain 1-1/2 I.P.S. Threaded drain will fit Dearborn part #8033 slipnut and part #W-573P washer. Faucet Deck mounted on 4 centers, accepts 3/8 sink leads, hot and cold water connections required (except model BSA-12) Model BSA-12: Backsplash mounted on 4 centers, hot and cold water connections required Sink Bowl Dimensions 9-1/4 by 11-1/2 by 6 deep Sink Strainer Perforated plastic Legs 1-5/8 diameter, 16 gauge stainless steel Stainless steel bullet feet Materials 20 gauge stainless steel Power cord access hole in front skirt, behind blender Glastender, Inc North Michigan Road Saginaw, MI Fax Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 3.05 Approval/Notes: Rev

87 Blender Stations Dimensional Information *NOTE: On BSA-18 model only, the faucet will be installed Left or Right to allow it to swivel into an adjacent ice bin for cleaning. If no side is specified, the faucet will be mounted on the Left side. 12" BACKSPLASH 14" 18" DRAIN 24" 24" 24" 9" 9" 9" BSA-12 BSA-14 BSA-18 BACKSPLASH 12" 14" 18" DRAIN 29" 29" 29" 10" 10" 10" PLAN VIEWS BSB-12 BSB-14 BSB-18 15" 15" 15" 18" 30" 37" 37" 37" 37" 30" 29" 19" 16" 24" 24" 24" 29" BSA-12 BSA-14 BSA-18 BSB-12*, BSB-14, BSB-18 *Note: BSB-12 faucet is mounted to backsplash. SIDE ELEVATIONS 5400 N Michigan Rd Saginaw, MI Fax Printed in USA

88 Project: Item #: Model #: Qty: AIA# SIS# Mug Frosters MF - Size: 24 = 24" One Door 36 = 36" One Door 48 = 48" Two Door Shelving Options: (Bottom rack standard) 1 = One layer 2 = Two layers MF36-B2 Finish Options: B = Black vinyl-clad steel SF = Stainless steel front and sides S = All stainless steel Standard Features Self-contained refrigeration All stainless steel interior construction with radius corners for easy cleaning Perfect exterior dimensions: 24 front to back and 24, 36, or 48 left to right CFC free foamed-in-place insulation Two Defrost Cycles: automatic - occurs every six hours without affecting normal operation, manual - user selected for complete six-hour defrost with automatic restart Specifications Electrical 120V, 1 phase, 60 Hz, 8.2 full load amps Dedicated 15 amp circuit is recommended Includes a 6-foot grounded cord and plug which exits the left rear of the refrigeration compartment Refrigeration 1/3 HP, 404A refrigerant Operating range: 0ºF to 35ºF Fin & tube evaporator with forced air circulation Plumbing Interior floor drain and condensate drain to automatic evaporator. No drain connection required Capacity 24 Model: oz mug total capacity; 41 bottom shelf, 41 middle shelf, 23 top shelf 36 Model: oz mug total capacity; 64 bottom shelf, 64 middle shelf, 47 top shelf 48 Model: oz mug total capacity; 90 bottom shelf, 90 middle shelf, 72 top shelf 3-3/4 casters or 6 legs are available Three exterior options: black vinyl-clad steel, stainless steel front & sides, or all stainless steel Three shelving options: standard (bottom), one additional layer, or two additional layers Six-foot grounded cord & plug included (exits left rear) Automatic condensate evaporator - no drain connection required One-piece integral top and mullion design Legs 1-5/8 diameter Stainless steel bullet feet Materials 20 gauge stainless steel parts include: top, door, interior floor, back*, front*, and sides* (*if all stainless finish is specified) 20 gauge black vinyl-clad steel parts include: sides, front, and back (if black vinyl-clad steel exterior is specified) 22 gauge stainless steel parts include: interior walls 16 gauge stainless steel parts include: legs* (* if specified) 16 gauge galvanized steel parts include: base Glastender, Inc N Michigan Rd Saginaw, MI Approval/Notes: Fax Specifications subject to change without notice. For current specifications please visit our website. Printed in USA Rev

89 Mug Frosters Dimensional Information Model A B No. of Doors MF MF MF A 6' GROUNDED CORD AND PLUG HERE A COIL 11 5/16" 24" 34 1/2" 19 1/4" 19 3/4" B 12 11/16" PLAN VIEW FRONT ELEVATION MANUAL DEFROST SWITCH 24" 24" 24" 20" 2-1/2" 6" COIL 19 1/4" 6" 7 3/4" 22 1/2" 38 1/4" 40 1/2" 6" 34 1/2" 7/8" 9-1/2" 3-3/4" 6" Standard Base Showing Optional Shelving Optional Casters TYPICAL END VIEWS Optional 6" Legs 5400 N Michigan Rd Saginaw, MI Fax Printed in USA

90 Project: Item #: Model #: Qty: AIA# SIS# Tee Towers BT- - BT-4-SSR Size: Specify the number of faucets from 4,5,6,8,10,12. Finish: SS = Stainless steel MF = Mirror finish PB = Polished brass Standard Features BT-10-MFR All stainless steel construction (brass is optional) Integral surface mount drain pan with lift-out perforated inserts 1/4 shanks with 3/16 restriction lines Available in grainline stainless, mirror finish stainless, or polished brass Available with insulated cold plate assembly for recirculating system Available without drain pan (specify suffix -LD on the model number) Available in 4,5,6,8,10 and 12 faucet sizes Stainless and mirror finish models include all stainless steel faucets and shanks Available with wine faucets (specify number and location when ordering) Foamed-in-place insulated column for extra rigidity Unique internal support system for solid mounting Base plate serves as template for hole cutting Specifications Drains Drain pan models - 1/2 tailpiece Materials 20 gauge stainless steel or brass parts include: head, column, drain pan, and perforated inserts 16 gauge galvanized steel parts include: subsurface head stiffener and base plate 11 gauge stainless steel parts include: inner column base and top plate and tower head mounting plate Shank Sizes 1/4 I.D. with 3/16 fittings Glastender, Inc North Michigan Road Saginaw, MI Fax Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 7.04 Approval/Notes: Rev

91 Tee Towers Dimensional Information A 4-3/4" A 9-7/8" 5" 1-1/8" 12" FRONT ELEVATION PLAN VIEW 5" SINGLE COLUMN TEE TOWERS DOUBLE COLUMN TEE TOWERS NUMBER OF FAUCETS "A" WIDTH 14" 17" 20" 10" 15-5/8" NUMBER OF FAUCETS "B" WIDTH 26" 32" 38" "C" WIDTH 12" 15" 18" 1/2" DRAIN 12" SIDE ELEVATION B 4-5/8" B C 9-7/8" 5" 12" 1-1/8" FRONT ELEVATION PLAN VIEW 5400 North Michigan Road Saginaw, MI Fax Printed in USA

92 Project: Item #: Model #: Qty: AIA# SIS# Single Bowl Sinks DHSB-12 Specifications HSA-12-D Hand Sink Models: HSA-12, HSA-12-D, HSA-18, HSB-12, HSB-12-D, HSB-12-AD, HSB-18, DHSA-18, DHSB-12, DHSB-18 Wet Waste Sink Models: SWA-12, SWA-18, SWB-12, SWB-18 Standard Features Manufactured with total welded construction to meet NSF standards All stainless steel construction One-piece seamless top and backsplash featuring 1/4 radius corners for easy cleaning Adjustable stainless steel bullet feet 9-1/4 by 11-1/2 by 6 deep sink bowl with hot and cold water gooseneck faucet Faucets are standard and ship mounted Models HSA-12-D, HSB-12-D and HSB-12-AD feature a soap dispenser and front skirt mounted C-fold paper towel dispenser Models DHSA-18, DHSB-12 and DHSB-18 feature a soap dispenser and hinged front access door to conceal C-fold paper towel dispenser All wet waste sink models include a lift-out perforated plastic wet waste strainer Soap dispenser is easy refilled from above, no need to crawl under equipment Product Information Drain 1-1/2 I.P.S. Threaded drain will fit Dearborn part #8033 slipnut and part #W-573P washer. Faucet Deck mount on 4 centers, accepts 3/8 sink leads, hot and cold water connections required Sink Bowl Dimensions 9-1/4 by 11-1/2 by 6 deep Legs 1-5/8 diameter, 16 gauge stainless steel Stainless steel bullet feet Materials 20 gauge stainless steel parts include: all components unless otherwise noted 18 gauge stainless steel parts include: leg pads on DHS models Single bowl sinks are available as hand sinks and wet waste sink models. Hand sink models HSA-12, HSA-18, HSB-12 and HSB-18, feature a standard stainless steel bowl and mounted faucet. Hand sink models HSA-12-D, HSB-12-D and HSB-12-AD include a soap dispenser and front skirt mounted C-fold paper towel dispenser. Hand sink models DHSA-18, DHSB-12 and DHSB-18 feature a soap dispenser and hinged front access door to conceal C-fold paper towel dispenser. Paper towels are easily accessed below the door. The access door is only opened for re-loading paper towels into the dispenser. Wet waste sink models SWA-12, SWA-18 and SWB-18 include a lift-out perforated plastic wet waste strainer. Glastender, Inc N Michigan Rd Saginaw, MI Fax Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 3.20 Approval/Notes: Rev

93 Single Bowl Sinks Dimensional Information 12" 12" 12" LIQUID SOAP DISPENSER 18" 18" 19" 19" 24" 19" 19" 24" DRAIN FRONT RAIL FRONT RAIL LIQUID SOAP DISPENSER HSA-12 or SWA-12 HSA-12-D PAPER TOWEL DISPENSER HSA-18 or SWA-18 DHSA-18 ACCESS DOOR FOR EASY LOADING OF PAPER TOWELS HSB-12 or SWB-12 12" LIQUID SOAP DISPENSER 12" 18" 12" 18" 24" LIQUID SOAP DISPENSER 24" 29" 24" 24" LIQUID SOAP DISPENSER 24" PAPER TOWEL DISPENSER HSB-12-AD FRONT RAIL HSB-12-D PAPER TOWEL DISPENSER DRAIN HSB-18 or SWB-18 DHSB-12 ACCESS DOOR FOR EASY LOADING OF PAPER TOWELS DHSB-18 PLAN VIEWS BACKSPLASH 24" BACKSPLASH 19" BACKSPLASH 24" 7" 7" 7" 37" 30" 37" 30" 37" 30" 37" 19" 16" 16" 16" 1" ADJUSTMENT FROM 36" TO 37" HSB-12-AD SIDE ELEVATION TYPICAL A DEPTH SIDE ELEVATION TYPICAL B DEPTH SIDE ELEVATION MODEL: DHSB-12 FRONT ELEVATION FRONT AND SIDE ELEVATIONS 5400 N Michigan Rd Saginaw, MI Fax Printed in USA

94 Project: Item #: Model #: Qty: AIA# SIS# Two, Three and Four Compartment Sinks (see reverse side for model numbers) TSB-60-S Standard Features All stainless steel construction & stainless steel bullet feet 18 gauge stainless steel one-piece seamless top, front rail and backsplash featuring 1/4 radius corners for easy cleaning 16 gauge stainless steel fabricated sink bowls 11 by 14 by 10-1/4 deep sink bowl with hot and cold water faucet Faucets are standard and ship mounted Extra wide sink bowl easily accomodates brush washer 19 deep models have a backsplash mounted faucet Integral drainboards have lift-out stainless steel perforated insert for better air circulation Perforated stainless steel inserts are available to cover sinks when not in use One over-flow tube per sink bowl included Specifications Drains 1-1/2 I.P.S. Threaded drain will fit Dearborn part #8033 slipnut and part #W-573P washer. Faucet A - 19 deep: backsplash mounted on 4 centers, 3/8 copper leads provided, hot and cold water connections required B - 24 deep: deck mounted on 4 centers, accepts 3/8 sink leads, hot and cold water connections required Sink Bowl Dimensions 11 by 14 by 10-1/4 deep Legs 1-5/8 diameter 16 gauge stainless steel Stainless steel bullet feet Materials 20 gauge stainless steel parts include: all components unless otherwise noted 18 gauge stainless steel parts include: one-piece top, front rail and back splash 16 gauge stainless steel parts include: sink bowls Product Information Multiple Sinks come in three different varieties: two, three, and four compartment. They feature an exclusive one-piece 18 gauge stainless steel top that is seamless from the front rail all the way through the backsplash. Each variety is offered with or without built-in drainboards on one or both sides of the sink compartment. Drainboards, where included, are a seamless and integral part of the worksurface. The seamless welded bowls are 16 gauge fabricated stainless steel. An L or R suffix in the model number designates the location of the sink compartment as left or right when there is only one drainboard. Glastender, Inc N Michigan Rd Saginaw, MI Fax Specifications subject to change without notice. For current specifications please visit our website. Printed in USA 3.22 Approval/Notes: Rev