New more-advanced multifunctional station. Equipped with 2 connection ports to enable a single station to simultaneously play 2 roles.

Transcription

1 For lead-free soldering Soldering Iron FM-0 Parallel Remover Model FM-0 New more-advanced multifunctional station. Equipped with connection ports to enable a single station to simultaneously play roles. Mini Parallel Remover Model FM-0 Desoldering Tool Model FM-0 HAKKO FM-0: Station + Soldering Iron

2 A single station plays multiple roles: Soldering, desoldering and SMD rework. This new station with connection ports allows users to use it more comfortably. Two connection ports Two soldering irons can be connected at the same time, which allows users to select and use the appropriate one without having to connect them alternatively. Powerful thermal recovery The composite tip provides powerful thermal recovery and stable temperature accuracy. Thermal Recovery Graph Temp( ) HAKKO FM-0 HAKKO 9 No offset required Sleep function After the iron is inserted into the iron holder, the sleep function activates for a user-settable time (0 to 9 min.) and the tip temperature will decrease to approximately 00. Auto power shut-off function When 0 minutes have elapsed after inserting the iron into the iron holder, the auto power shut-off function activates and stops to apply power to the heating element. connecting cable onnect the FM-0 station and FH-00 iron holder using a connecting cable Test criteria Board: Paper phenol copper Solder: ø. x mm ycle: Every sec. Lead-free solder is used. *It is necessary to change unit settings before using sleep and auto power shut-off functions. Station + One Soldering Iron Time(sec.) Soldering Soldering Iron Lightweight grip provides fatigueless work even for extended jobs. Four colored sleeves are provided. Using color-coding for tip shape enables convenient work. The lock-type sleeve enables it to be firmly secured. N system Example setup FM-0 N soldering iron FX-80 N generator FX-9 N station (N airflow meter) *Fur further details, refer to the N system brochure. SMD rework Parallel Remover Mini Parallel Remover Unique parallel movement of tips allows easy grip and release and applies h- eat optimally. Parallel movement Direct heating reduces damage to neighboring sensitive components compared to hot air systems. FM-0: -an be used for chips and flat packages up to mm in size. FM-0: -Standard or reverse tweezers action can be selected with a switch lever. -Equipped with a small ergonomic grip. Desoldering Desoldering Tool DB (Desoldering ontrol Box) *Before using the FM-0 unit, connect it to the desoldering control box and compressor. Greatly improved workability Small ergonomic-style grip and light weight provides fatigueless work. New design prevents clogging New design with reduced distance between the nozzle and end and filter pipe prevents clogging by sucked-up solder. Easy maintenance Uses disposable paper filter pipes. Allows paper and solder to be disposed of separately. Quick nozzle replacement. Nozzle can be replaced safely with the provided nozzle remover. Safe design Equipped with a nozzle lock function. Inserting a nozzle into the grip automatically locks it in place and prevents the nozzle cartridge from being pulled out suddenly. Selectable grip Detachable handle allows t- wo-way use: gun type or straight type. ombination examples of handpieces which can be connected. Since all handpieces cannot be connected to each connector port, refer to the following table. * * * Handpiece FM-0 FM-0 FM-0 FM-0 FM-0 * * * * D hannel D connector S hannel S connector If the FM-0 or the FM-0 handpiece is connected to the channel D connector the other handpiece connected to the channel S connector can be used with it at the same time. If either handpiece is used, the non-used handpiece will be automatically subject to sleep mode. If two FM-0 handpieces are connected to both channel connectors connect each of them to the desolder control box. The N generator and N airflow meter must be connected before using the FM-0. Fur further details, refer to the N system brochure.

3 List of and Example Setups HAKKO FM-0 Temperature Accuracy Station Output Dimensions Weight 0W 00 to 0 ± at idle temperature V (W) x (H) x 90(D)mm.kg Replacement and Optional Parts Part No. B B8 B B9 99B-0 B A Name/Description Sleeve assembly, yellow Sleeve assembly, blue Sleeve assembly, orange Sleeve assembly, green Tip cleaner onnecting cable eramic paper filter/pcs Applicable FM-0 FM-0 FM-0 FM-0 FH-00 FM-0, FH-00 FM-0 Station + One Soldering Iron HAKKO FM-0 Soldering Iron 0W (V) < Ω < mv 88mm with.d tip 0g with.d tip.m *The temperature was measured using the HAKKO FG- thermometer. Tip tray Iron holder (No.FH00-0) HAKKO FM-0 station HAKKO FM-0 soldering iron ontrol card Heat resistant pad Power cord (not shown in the photo) 8 onnecting cable (not shown in the photo) A A B Tip Tray *Tips are not included. Front holder Filter pipe assembly Tip tray HAKKO 99B Tip leaner FM-0 FM-0 FM-0 Sleeve Assemblies Soldering SMD rework Desoldering Soldering Iron Parallel Remover Mini Parallel Remover *Tips(shape-I) are originally attached. Desoldering Tool *Nozzle is an optional part. No.FM0-0 0W (V) < Ω < mv 88mm with.d tip 0g with.d tip.m onnecting cable HAKKO FH-00 iron holder HAKKO 99B tip cleaner ( + : No.FH00-0) HAKKO FM-0 soldering iron Heat resistant pad No.FM0-0 0W (V) < Ω < mv 8mm with SOP L tip g with SOP L tip.m onnecting cable HAKKO FH-00 iron holder leaning sponge ( + : No.FH00-0) Model FM-0 parallel remover Heat resistant pad Standard Tip No.FM0-0 0W (V) < Ω < mv mm with I tip g with I tip.m T9-I (Shape-I) onnecting cable HAKKO FH-00 iron holder leaning sponge ( + : No.FH00-0) Model FM-0 mini parallel remover Tips (No.T9-I/pcs of set) Heat resistant pad omponent bed MODEL FM-0 Desoldering Tool Desolder ontrol Box Output Vacuum Generator Vacuum Pressure(max.) Suction Flow Applied Air Pressure ompressed Air onsumption Dimension Weight (w/o cord & hose) No.FM0- No.FM0- No.FM0-0W (V) 0-0 < mv < Ω 80mm with ø.0 nozzle g with ø.0 nozzle.m W V Ejector type 9kPa (00mmHg) 8L/min. < mv 90kPa (.0kgf/cm ) when in use (trigger or button is pressed). c.f.m. (L/min.) 9(W) x (H) x (D)mm.kg (UK) (France) (Other EU ountries) 8 9 HAKKO FH-00 iron holder HAKKO 99B tip cleaner ( + : No.FH00-0) leaning drill eramic paper filter Desolder control box (DB) onnecting cable Filter pipe assembly 8 Model FM-0 desoldering tool 9 Handle (for gun configuration) Nozzle remover *Nozzle is an optional part.

4 Replacement Tips Temperature accuracy ± without offset. The iron tips marked with ** have a temperature accuracy of ±. T series For HAKKO FM-0 Unit : mm ø. T-K Shape-K T-KF Shape-KF T-KL Shape-KL T-KU Shape-KU T-B Shape-B T-B Shape-0.B T-B 9 Shape-0.B T-B Shape-0.B T-BLL Shape-BL K ø. ø.. ø.. ø. B R0.. R0. R0. R0. R0. R T-R0 Shape-.0R ø..0 T-R Shape-.R ø.. T-R Shape-.R.. T-R Shape-.R ø.8. T-R8 Shape-.8R ø..8 T-B Shape-B T-BF* T-B Shape-B T-BF* T-B Shape-B T-BF* T-B Shape-.B T-B Shape-.B ø ø ø ø. ø. T-SB0 Shape-0.SB T-SB0 Shape-0.SB T-SB0 Shape-0.SB T-SB08 Shape-0.8SB T-SB0 Shape-0.SB B. T-B8 ø.8. Shape-.8B..... SB R0. T-SBS0. Shape-0.BS R0. T-SBS0.. Shape-0.BS R0... R ø0.... R0. R0. T- Shape- T-F* Shape- T-F* Shape- T- Shape- T-F* T-0** Tunnel. x. T-0** Tunnel. x. T-0** Tunnel 9. x 8. T-0** Tunnel 9. x.8 T-0** Tunnel 9. x. ø ø ø 9. ø T-D08 Shape-0.8D T-D Shape-.D T-D Shape-.D T-D Shape-D T-D Shape-.D TUNNEL T-0** Tunnel.9 x. T-0** Tunnel.9 x 8.8 T-08** Tunnel 9. x. T-09** Tunnel. x 0. T-** Tunnel 9. x ø0.8 ø. ø. ø ø T-D Shape-.D T-D Shape-D T-D Shape-.D T-DL Shape-D T-DL Shape-.D T-** Quad. x 8. T-** Quad. x. T-** Quad.8 x.8 T-** Quad.9 x.9 T-** Quad. x. D ø. 0.. T-X Shape-.XD ø ø.. 8 ø ø T-** Quad. x T-** Quad. x T-8** Quad.8 x T-9** Quad 8. x T-** Quad. x T-0** Spatula T-0** Spatula QUAD ø T-0** Spatula. T-0** Spatula. T-I Shape-I T-IL Shape-IL T-ILS Shape-ILS SPATULA I R0. 9. R0.. R J T-JO 0 R0. Shape-0.J. T-JD 0 ø. ø0.8 Shape-.JD R0. T-JD 0 ø. ø0. Shape-0.JD.. T-JL0 0 R0.. Shape-0.JL 9. T-JS0 Shape-0.JS 0 R0...9 SPEIAL APPLIA- TIONS TYPE T-BM*** Shape-B Bevel with indent ø. T-BM*** Shape-B Bevel with indent... ø T-0** Shape- REAH HISEL * Tinned on the soldering surface only. ** The iron tips marked with double asterisks (**) have a temperature accuracy of ±. Others have a temperature accuracy of ±. *** The part numbers T-BM and T-BM are not available for sale or use in the U.S.A.. ø. T-0** Shape- REAH HISEL 0 R0. 9

5 Replacement Tips and Nozzles Temperature accuracy ± without offset. T series For Model FM-0 *set: pcs Unit : mm T-0 HIP 0.I T-0 HIP 0. T-0 HIP L T-0 HIP L T- HIP L R0. H IP T-0 SOP L T-0 SOP 8L T-0 SOP L T-08 SOP L S O P T-09 SOP L T- SOP 0L T- SOP L T- SOP 8L T9 series For Model FM-0 *set: pcs ø. H IP T9-I HIP I T9-L HIP L T9-L HIP L Nseries For Model FM-0 N-0 Nozzle 0.mm N-08 Nozzle 0.8mm N- Nozzle.0mm N- Nozzle.mm O.D. ø.9 I.D. ø0.. O.D. ø I.D. ø. O.D. ø. I.D. ø O.D. ø.8 I.D. ø. O.D. ø. I.D. ø O.D. ø I.D. ø0.8 O.D. ø. I.D. ø O.D. ø. I.D. ø.... N- Nozzle.mm N-0 Nozzle.0mm N- Nozzle.mm N-L Long Nozzle.0mm.... and design are subject to change without notice. opyright Hakko orporation.all right reserved. A008BbBa00 Dec. 00 OVERSEAS AFFILIATES U.S.A. AMERIAN HAKKO PRODUTS, IN. 890 N. AVE. WILLIAMS VALENIA, A 9, U.S.A. TEL: () FAX: () Toll Free (800)88-HAKKO Please access to the following for the other Sales affiliates. HEAD OFFIE -, SHIOKUSA -HOME, NANIWA-KU, OSAKA, -00 JAPAN TEL:+8--- FAX: sales@hakko.com HONG KONG HAKKO DEVELOPMENT O., LTD. ROOM, EASTERN HARBOUR ENTRE, 8 HOI HAK STREET, QUARRY BAY, HONG KONG. TEL: 8-88 FAX: info@hakko.com.hk SINGAPORE HAKKO PRODUTS PTE., LTD., GENTING LINK #0-0, PERFET INDUSTRIAL BUILDING, SINGAPORE 98 TEL: 8- FAX: sales@hakko.com.sg