TRUMAN STATE UNIVERSITY PRESIDENT S RESIDENCE RENOVATION
|
|
- Maurice Craig
- 5 years ago
- Views:
Transcription
1 SECTION RESIDENTIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section. 1.2 SUMMARY A. Section Includes: 1. Bathtubs. 2. Faucets. 3. Lavatories. 4. Bar sinks. 5. Kitchen sinks. 6. Laundry sinks. 7. Disposers. 8. Hot-water dispensers. 9. Water closets. 10. Toilet seats. 11. Supply fittings. 12. Waste fittings. 1.3 ALTERNATES A. See Section "Alternates for work of this Section affected by alternates. 1.4 ACTION SUBMITTALS A. Product Data: For each type of product. 1.5 INFORMATIONAL SUBMITTALS A. Coordination Drawings: Counter cutout templates for mounting of counter-mounted plumbing fixtures. 1.6 CLOSEOUT SUBMITTALS A. Operation and Maintenance Data: For plumbing fixtures and faucets to include in emergency, operation, and operation and maintenance manuals. 1. In addition to items specified in Section "Operation and Maintenance Data," include the following: RESIDENTIAL PLUMBING FIXTURES
2 PART 2 - PRODUCTS 2.1 BATHTUBS A. Bathtubs (Master Bath 203): PMMA. 1. PMMA (Acrylic) Bathtubs: Duravit; Starck, Model No a. Standard: ANSI Z for PMMA plastic bathtubs. b. Bathing Surface: Slip resistant according to ASTM F 462. c. Size: 67 by 29 inches nominal, drop-in type. d. Color: White. e. Drain: NPS 1-1/2; chrome-plated brass, pop-up waste and overflow. 3. Supply Fittings: Included in faucet. 4. Waste Fittings: a. Standard: ASME A /CSA B b. Drain: Stainless steel or chrome-plated brass, removable strainer. c. Overflow: Chrome-plated-brass escutcheon with toggle drain-plug device. d. Drain Piping: NPS 1-1/2 cast-brass overflow, P-trap, and waste. ****** OR ****** e. Drain Piping: Schedule 40 PVC, NPS 1-1/2 P-trap, and waste. 2.2 BATHTUB FAUCETS B. Bathtub Faucets (Master Bath 203): Moen; Align, two-handle diverter Roman tub with handshower, Model No. T Standards: ASME A /CSA B125.1 and ASSE Faucet: a. Body Material: Solid brass. b. Finish: Polished chrome plate. c. Mounting: Exposed, deck. d. Supply Connections: NPS 1/2. RESIDENTIAL PLUMBING FIXTURES
3 2.3 LAVATORIES A. Lavatories (Half Bath 104): Rectangular, PMMA, cabinet mounted. 1. PMMA (Acrylic) Lavatories: Duravit; Vero furniture handrinse basin, Model No a. Standard: ANSI Z124.3 for PMMA lavatories. b. Rectangular Nominal Size: 18 by 15 inches, nominal. c. Faucet-Hole Punching: One hole. d. Color: White. 3. Supply Fittings: Comply with requirements in "Supply Fittings" Article. 4. Waste Fittings: Comply with requirements in "Waste Fittings" Article. B. Lavatories (Master Bath 203): Rectangular, vitreous china, under-counter mounted. 1. Vitreous-China Lavatories: Kohler; Ladena, Model No. K a. Standard: ASME A /CSA B45.1 for vitreous-china lavatories. b. Rectangular Nominal Size: 21 by 14 inches, nominal. c. Color: White. 3. Waste Fittings: Comply with requirements in "Waste Fittings" Article. 2.4 LAVATORY FAUCETS B. Lavatory Faucets (Half Bath 104): Single-control mixing valve. Moen; Align one-handle high arc bathroom faucet, Model No Centers: Single hole. 5. Mounting: Deck. 6. Drain: Pop up. C. Lavatory Faucets (Access Bath 109): Two-handle mixing valve. RESIDENTIAL PLUMBING FIXTURES
4 Moen; Align two-handle high-arc faucet, Model No. T Centers: Existing. 5. Mounting: Deck. 6. Drain: Grid (Existing). D. Lavatory Faucets (Master Bath 203): Two-handle mixing valve. Moen; Align two-handle high-arc faucet, Model No. T Centers: 12 inches. 5. Mounting: Deck. 6. Drain: Pop up. E. Lavatory Faucets (Bath #2 211): Two-handle mixing valve. Moen; Align two-handle high-arc faucet, Model No. T Centers: Existing. 5. Mounting: Deck. 6. Drain: Pop up. 2.5 SHOWER FAUCETS B. Shower Faucet (Master Bath 203): Single handle mixing valve. 1. Faucets, Fittings, Valves, and Shower Heads: a. Basis-of-Design Products: Subject to compliance with requirements, provide the following: 1) Moen; Align Moentrol shower only, Model No. T ) Moen shower valve, Model No ) Moen; Fina handshower, Model No. S11705EP. 4) Moen Drop Ell handshower connector, Model No. a725. 5) Moen; Align transfer valve, Model No. T ) Moen transfer connection valve, Model No RESIDENTIAL PLUMBING FIXTURES
5 a. Standard: ASME A /CSA B125.1 and ASSE b. General: Include hot- and cold-water indicators; check stops; and fixed shower head, arm, and flange and hand head complying with ASSE 1014 with arm, flange, hose, and bracket. Coordinate faucet inlets with supplies. c. Finish: Polished chrome plate. C. Shower Faucet (Bath #2 211): Single handle mixing valve. 1. Faucets, Fittings, Valves, and Shower Heads: a. Basis-of-Design Products: Subject to compliance with requirements, provide the following: 1) Moen; Align Moentrol tub/shower, Model No. T ) Moen shower valve, Model No a. Standard: ASME A /CSA B125.1 and ASSE b. General: Include hot- and cold-water indicators; check stops; and fixed shower head, arm, and flange. Coordinate faucet inlets with supplies. c. Finish: Polished chrome plate. 2.6 BAR SINKS - Alternate A. Bar Sinks (Breakfast 105): Single bowl, under-counter mounted, stainless steel. 1. Stainless-Steel Bar Sinks: Blanco; Precision small bowl undermount, Model No a. Standard: ASME A /CSA B45.4 for stainless-steel lavatories. b. Overall Dimensions: 11 by 20 inches. 3. Waste Fittings: Comply with requirements in "Waste Fittings" Article. 2.7 KITCHEN AND LAUNDRY SINKS A. Kitchen Sink - Alternate: Two bowl, under-counter mounted, stainless steel. 1. Stainless-Steel Kitchen Sink: Blanco; Quatrus undermount, Model No a. Standard: ASME A /CSA B45.4 for stainless-steel kitchen sinks. RESIDENTIAL PLUMBING FIXTURES
6 b. Overall Dimensions: 33 by 18 inches. 3. Waste Fittings: Comply with requirements in "Waste Fittings" Article, except include continuous waste for multibowl sinks. a. Disposer: Kitchen 106. b. Hot-Water Dispenser: Comply with requirements in "Hot-Water Dispensers" Article. B. Laundry Sink: One bowl, under-counter mounted, stainless steel. 1. Stainless-Steel Laundry Sink: Blanco; Quatrus undermount, Model No a. Standard: ASME A /CSA B45.4 for stainless-steel kitchen sinks. b. Overall Dimensions: 22 by 18 inches. 3. Waste Fittings: Comply with requirements in "Waste Fittings" Article, except include continuous waste for multibowl sinks. 2.8 SINK FAUCETS B. Sink Faucets (Breakfast 105) - Alternate: Bar sink. Blanco; Alta bar faucet (cold water only), Model No Mixing Valve: Single control. 5. Centers: Single hole. 6. Mounting: Deck. C. Sink Faucets (Kitchen 106) - Alternate: Kitchen sink. Moen; Tilt one-handle low-arc pullout kit, Model No. 7626C. 4. Mixing Valve: Single control. 5. Centers: Single hole. 6. Mounting: Deck. RESIDENTIAL PLUMBING FIXTURES
7 D. Sink Faucets: Laundry sink. Moen; Tilt one-handle low-arc pullout kit, Model No. 7626C. 4. Mixing Valve: Single control. 5. Centers: Single hole. 6. Mounting: Deck. 2.9 DISPOSERS A. Disposers (Kitchen 106): 1. Disposers: Insinkerator; Badger 5XP. 2. Standards: ASSE 1008 and UL 430, and listed and labeled as defined in NFPA 70, by a qualified testing agency, and marked for intended location and application. 3. General: Include reset button; wall switch; corrosion-resistant chamber with jam-resistant, cutlery- or stainless-steel grinder or shredder; NPS 1-1/2 outlet; quick-mounting, stainless-steel sink flange; antisplash guard; and combination cover/stopper HOT-WATER DISPENSERS B. Hot-Water Dispensers: Gooseneck spout with lever handle, flow control. 1. Gooseneck Spout with Lever-Handle, Flow-Control, Hot-Water Dispensers: Newport Brass; East Linear, Model No. 106H. 2. Standard: ASSE General: Household-type dispenser with instant on-off control; insulated, corrosionresistant-metal storage tank that is open to atmosphere; electric heating element; chrome-plated faucet or spout; removable strainer; thermostat control for water temperature up to 190 deg F; and thermal-overload protection. 4. Storage Tank Capacity: 0.5 gal.. 5. Heating Element: 750 W minimum, 115-V ac WATER CLOSETS A. Water Closet (Master Bath 203): Floor mounted, floor outlet, close coupled (gravity tank), vitreous china. RESIDENTIAL PLUMBING FIXTURES
8 1. Basis-of-Design Product: Subject to compliance with requirements, provide Toto; Vespin II 1G two-piece toilet elongated bowl, Model No. CST474CUFG#01 2. Bowl: a. Standards: ASME A /CSA B45.1, ASME A , and ASSE b. Height: Standard. c. Rim Contour: Elongated. d. Color: White. 3. Toilet Seat: Master Bath Supply Fittings: a. Standard: ASME A /CSA B b. Supply Piping: Chrome-plated-brass pipe or chrome-plated-copper tube matching water-supply piping size. Include chrome-plated wall flange TOILET SEATS A. Toilet Seats (Master Bath 203): 1. Provided with water closet. 2. Standard: IAPMO/ANSI Z Material: Plastic. 4. Type: Residential. 5. Shape and Size: Elongated rim (Closed front). 6. Color: White SUPPLY FITTINGS B. Standard: ASME A /CSA B C. Lavatory, Bar Sink, Kitchen Sink, and Laundry Sink Supply Fittings: 1. Supply Piping: Chrome-plated-brass pipe or chrome-plated-copper tube matching watersupply piping size. Include chrome-plated wall flange. 2. Stops: Chrome-plated-brass, one-quarter-turn, ball-type or compression stop with inlet connection matching water-supply piping type and size. 3. Risers: a. Size: NPS 3/8 for lavatories. b. Size: NPS 3/8 for bar sinks, kitchen sinks, and laundry sinks. c. Material: Chrome-plated, soft-copper flexible tube riser WASTE FITTINGS A. Standard: ASME A /CSA B RESIDENTIAL PLUMBING FIXTURES
9 B. Drain: Grid type with NPS 1-1/4 offset tailpiece for accessible lavatories. C. Drain: Pop-up type with NPS 1-1/4 straight tailpiece as part of faucet for standard lavatories. D. Drain: Grid type with NPS 1-1/2 straight tailpiece for standard bar sinks and kitchen sinks, and for laundry sinks. E. Trap: 1. Size: NPS 1-1/4 for lavatories, bar sinks, kitchen sinks, and laundry sinks. 2. Material: Chrome-plated, two-piece, cast-brass trap and swivel elbow with inchthick brass tube to wall; and chrome-plated-brass or -steel wall flange GROUT A. Standard: ASTM C 1107/C 1107M, Grade B, post-hardening and volume-adjusting, dry, hydraulic-cement grout. B. Characteristics: Nonshrink; recommended for interior and exterior applications. C. Design Mix: 5000-psi, 28-day compressive strength. D. Packaging: Premixed and factory packaged. PART 3 - EXECUTION 3.1 EXAMINATION A. Examine roughing-in of water-supply and sanitary drainage and vent piping systems to verify actual locations of piping connections before plumbing-fixture installation. B. Examine walls, floors, cabinets, and counters for suitable conditions where fixtures will be installed. C. Proceed with installation only after unsatisfactory conditions have been corrected. 3.2 INSTALLATION A. Install plumbing fixtures level and plumb according to roughing-in drawings. B. Install floor-mounted water closets on closet flange attachments to drainage piping. C. Install counter-mounting fixtures in and attached to casework. D. Install water-supply piping with stop on each supply to each fixture to be connected to water distribution piping. Attach supplies to supports or substrate within pipe spaces behind fixtures. Install stops in locations where they can be easily reached for operation. E. Install toilet seats on water closets. RESIDENTIAL PLUMBING FIXTURES
10 F. Install faucet flow-control fittings with specified flow rates and patterns in faucet spouts if faucets are not available with required rates and patterns. Include adapters if required. G. Install shower flow-control fittings with specified maximum flow rates in shower arms. H. Install traps on fixture outlets. 1. Exception: Omit trap on fixtures with integral traps. 2. Exception: Omit trap on indirect wastes unless otherwise indicated. I. Install disposer in outlet of each sink indicated to have a disposer. Install switch where indicated or in wall adjacent to sink if location is not indicated. J. Install hot-water dispensers in back top surface of sink or in countertop with spout over sink. K. Set bathtubs and shower receptors in leveling bed of cement grout. L. Install wall flanges or escutcheons at piping wall penetrations in exposed, finished locations. Use deep-pattern escutcheons if required to conceal protruding fittings." M. Seal joints between plumbing fixtures, counters, floors, and walls using sanitary-type, one-part, mildew-resistant silicone sealant. Match sealant color to fixture color. Comply with sealant requirements specified in Section "Joint Sealants." 3.3 CONNECTIONS A. Connect fixtures with water supplies, stops, and risers, and with traps, soil, waste, and vent piping. Use size fittings required to match fixtures. B. Comply with water piping, and soil and waste piping requirements specified elsewhere. 3.4 ADJUSTING A. Operate and adjust plumbing fixtures and controls. Replace damaged and malfunctioning fixtures, fittings, and controls. B. Adjust water pressure at faucets to produce proper flow. 3.5 CLEANING AND PROTECTION A. After completing installation of plumbing fixtures, inspect and repair damaged finishes. B. Clean plumbing fixtures, faucets, and other fittings with manufacturers' recommended cleaning methods and materials. C. Provide protective covering for installed plumbing fixtures and fittings. D. Do not allow use of plumbing fixtures for temporary facilities. END OF SECTION RESIDENTIAL PLUMBING FIXTURES
B. Shop Drawings: Include diagrams for power, signal, and control wiring.
SECTION224213.13 -COMMERCIAL WATERCLOSETS PART 1- GENERAL 1.1 SUMMARY Section Includes: 1. Water closets. 2. Flushometer valves. 3. Toilet seats. 1.2 ACTION SUBMITTALS Product Data: For each type of product.
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Faucets for lavatories, bathtubs, bathtub/showers, showers and sinks. 2. Flushometers. 3. Toilet
More informationB. Shop Drawings: Include diagrams for power, signal, and control wiring.
SECTION 224213.13 - COMMERCIAL WATER CLOSETS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION PLUMBING FIXTURES
CSUEB Pioneer Heights Phase r 15410 Page 1 SECTION 15410 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More information1. Division 22 Section "Emergency Plumbing Fixtures." 2. Division 22 Section "Drinking Fountains and Water Coolers."
Page 224000-1 SECTION 224000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationA. Section Joint Sealants: Seal fixtures to walls and floors.
SECTION 224000 - PLUMBING FIXTURES PART 1 GENERAL 1.1 SECTION INCLUDES A. Water closets. B. Urinals. C. Lavatories. D. Sinks. E. Service sinks. F. Showers. G. Wash fountains. H. Eye wash fountains. 1.2
More informationA. This Section includes the following emergency plumbing fixtures:
Page 224500-1 SECTION 224500 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationDUKE UNIVERSITY CONSTRUCTION STANDARDS
1 22 40 00 Plumbing Fixtures 1. General A. Definitions 1. Section includes a. Water closets and urinals b. Lavatories, sinks, and service sinks c. Electric water coolers, drinking fountains, d. Showers
More information2). Crane Co. 4). Kohler Co. 5). Universal-Rundle Corp. Revised September 29, 2017 Commercial Plumbing Fixtures
PART 1: GENERAL A. This Section provides design standards for plumbing fixtures and trim. Certification of compliance with specified ANSI, UL, and ASHRAE Standards will be required, as appropriate, for
More informationPLUMBING FIXTURES CHAPTER 27
CHAPTER 27 PLUMBING FIXTURES SECTION P2701 FIXTURES, FAUCETS AND FIXTURE FITTINGS P2701.1 Quality of fixtures. Plumbing fixtures, faucets and fixture fittings shall be constructed of approved materials,
More informationA. All fixtures shall meet the requirements of ANSI A117.1, ANSI Z124.2 and the State of Texas Accessibility Standards (TAS).
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationPLUMBING FIXTURES Reserved
CHAPTER 27 PLUMBING FIXTURES Reserved 2003 INTERNATIONAL RESIDENTIAL CODE 395R This page left intentionally blank. 396R 2003 INTERNATIONAL RESIDENTIAL CODE SECTION P2708 SHOWERS P2708.1 General. Shower
More informationA. This Section includes the following domestic water piping specialties:
SECTION 221119 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationSunset Point Building 2 BRUSHED NICKEL TRADITIONAL UPGRADE PACKAGE. Christine Mullineaux th St. North Pinellas Park, FL
Sunset Point Building 2 BRUSHED NICKEL TRADITIONAL UPGRADE PACKAGE Christine Mullineaux 6600 49th St. North Pinellas Park, FL 33781 727-521-2691 TABLE OF CONTENTS Master Bath-whitebn 3 Guest Bath 1 6 Guest
More informationSECTION PLUMBING
SECTION 22 10 00 PLUMBING PART 1 GENERAL 1.1 WORK INCLUDED A. Furnish all labor, material and equipment necessary for the complete installation of the sanitary sewer system (including soil and vent piping),
More informationDESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
PART 1 - GENERAL 1.1 Toilet rooms and utility rooms to have floor drains at lowest point. 1.2 Utilize Exposed Flushometers. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
More informationThermostatic shower. Mp1 SAMPLE INSTALLATION. S5573/1 (page 32) + S2261 (page 32) S2200 (page 35) + S2123 (page 35) S2218 (page 35) + S2190 (page 35)
Mp Thermostatic shower SAMPLE INSTALLATION S557/ (page ) + S6 (page ) S557/ (page ) + S6 (page ) S8 (page 5) + S90 (page 5) S00 (page 5) + S (page 5) S557/ (page ) + S6 (page ) S557/ (page ) + S6 (page
More informationTUBS & SURROUNDS FIBERGLASS TUB STANDARD FIBERGLASS GARDEN TUB
TUBS & SURROUNDS FIBERGLASS TUB STANDARD One-piece design for a clean, simple design; left, right, or center drain. 309525 54 x 28 Center White 309530 54 x 28 Center Bone 309535 54 x 28 LH Bone 309540
More informationGENERAL PLUMBING REQUIREMENTS
22 00 00 GENERAL PLUMBING REQUIRMENTS i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables iii. 01 81 00 Facility Performance
More informationDESIGN AND CONSTRUCTION STANDARDS July 2011
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design for new construction and renovations.
More informationBidet. Brick. S3512 Bidet mixer n. 2 flexible hoses /4 click clack drain with overflow US $
Bidet S5 Bidet mixer n. flexible hoses 4 /4 click clack drain with overflow chrome S5CR 979,00 brushed nikel S5SN 54,00 Recommended item to order separately: S40 at page 75 S5 Bidet mixer with swivel spout
More informationDESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.
PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
More informationA. General: comply with appropriate standards. 1. International Association of Plumbing and Mechanical Officials: IAPMO. 2. California State AB 1953.
SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5. Service sinks. 6. Electric water coolers. 7. Wash fountains.
More informationThermostatic shower. De Soto SAMPLE INSTALLATION. S3253/1 (page 16) + S2261 (page 16) S2239 (page 18) + S2172 (page 18) S2229 (page 18)
De Soto Thermostatic shower SAMPLE INSTALLATION S5/ (page 6) + S6 (page 6) S5/ (page 6) + S6 (page 6) S9 (page 8) + S7 (page 8) S9 (page 8) S5/ (page 6) + S6 (page 6) S5/ (page 6) + S6 (page 6) S9 (page
More informationSECTION PLUMBING FIXTURES AND TRIM. A. Types of plumbing fixtures required for the project include the following:
SECTION 15440 PART I - GENERAL 1.01 WORK INCLUDED A. Types of plumbing fixtures required for the project include the following: 1. Water Closets 2. Urinals 3. Lavatories 4. Mop Sink 5. Sinks 6. Electric
More informationB. Galvanized-Steel-Sheet Sleeves: inch minimum thickness; round tube closed with welded longitudinal joint.
(816) 373-4878 U1208-01/FAI29-029 (573) 751-2624 SECTION 2 105 17 - SLEEVES AND SLEEVE SEALS FOR FIRE-SUPPRESSION PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the
More informationTechnical drawings. Bio Shock S2216/1 S2190 S2216 S2123 S2199 S2200 S2124 S2199/1
Shock Technical drawings S90 S6 S6/ S S99 S00 S4 S99/ 8 Shock Technical drawings,8 S9 S9 S 8 Shock Technical drawings 8 Inside: ceramic discs cartridges (S05) Technical drawings at page 95 Finishes: CR
More informationBRADLEY HALO EMERGENCY PLUMBING FIXTURES
BRADLEY HALO EMERGENCY PLUMBING FIXTURES Bradley Halo Emergency Plumbing Fixtures are a new generation in safety equipment, featuring separate supply and waste piping to eye/face wash, ergonomic hand activation
More informationWayne State University WSU Project No Chatsworth Tower Apts. Misc. Bldg. Upgrades DSD Project No
SECTION 213113 - ELECTRIC-DRIVE, CENTRIFUGAL FIRE PUMPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationHWC NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.
ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE
More informationICP Plumbing Exam. Name: Carefully read each question and then circle the letter of the best answer.
ICP Plumbing Exam Name: Date: Score: Carefully read each question and then circle the letter of the best answer. 1. A 1 inch diameter faucet, where the inside edge of the spout opening is 2.5 inches away
More informationSUBCOURSE EDITION EN US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV)
SUBCOURSE EDITION EN5113 5 US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV) US ARMY PLUMBER MOS 51K SKILL LEVELS 1 AND 2 COURSE PLUMBING FIXTURES (PLUMBING IV) SUBCOURSE NO. EN5113 US Army Engineer
More informationSanitary Drainage Systems
11.1 MATERIALS See Section 3.1. Sanitary Drainage Systems 11.2 BUILDING SEWERS AND BUILDING DRAINS 11.2.1 Sewer or Drain in Filled Ground Chapter 11 Building sewers or building drains that are installed
More informationThis Product MasterSpec Section is licensed by AVITRU, LLC to Haws Corporation ("Licensee").
Copyright 2017 by The American Institute of Architects (AIA) Exclusively published and distributed by AVITRU, LLC for the AIA This Product MasterSpec Section is licensed by AVITRU, LLC to Haws Corporation
More informationPARTS STOCKED REPLACEMENT FAUCET BIBB SCREWS... SCREW ASSORTMENT MISC. 3 /8" BIBB LOC SCREW 1 /2" BIBB SCREW 1 /2" BIBB LOC SCREW 3 /8" BIBB SCREW
January 1, 2001 STOCKED REPLACEMENT FAUCET BIBB SCREWS... Parts-5L 3 /8" BIBB SCREW 6-32 GAUGE CHROME 35138- No. 1 3 /8" BIBB SCREW 10-24 GAUGE CHROME 35153- No. 16 3 /8" BIBB SCREW 8-32 GAUGE CHROME 35141-
More informationSunset Point Building 2 BRUSHED NICKEL UPGRADE CONTEMPORARY PACKAGE. Christine Mullineaux th St. North Pinellas Park, FL
Sunset Point Building 2 BRUSHED NICKEL UPGRADE CONTEMPORARY PACKAGE Christine Mullineaux 6600 49th St. North Pinellas Park, FL 33781 727-521-2691 TABLE OF CONTENTS Master Bath 3 Guest Bath 1 6 Guest Bath
More informationDOMESTIC WATER PACKAGED BOOSTER PUMPS
DIVISION 22 PLUMBING 22 11 16 DOMESTIC WATER PIPING 22 11 19 DOMESTIC WATER PIPING SPECIALTIES 1. To facilitate landscape and other maintenance operations, exterior hose bibs shall be provided at 150 foot
More informationFixtures Installation
Youth Explore Trades Skills Description Students will learn to install a toilet and lavatory basin. Lesson Outcomes The student will be able to: Install a toilet Install a lavatory basin Assumptions The
More informationUniversity of Rochester October 17, 2008 Brooks Landing Business Center
SECTION 224200 COMMERCIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, equipment and services to perform operations required for the complete installation and related
More informationBRADLEY HALO EMERGENCY PLUMBING FIXTURES (Short Form Version)
BRADLEY HALO EMERGENCY PLUMBING FIXTURES (Short Form Version) Bradley Halo Emergency Plumbing Fixtures are a new generation in safety equipment, featuring separate supply and waste piping to eye/face wash,
More information8 Kitchen Gooseneck. 4 Lavatory/Shower. 8 Shower. Adjustable Garden Tub. Diverter Spring & Spool Diverter Knob Plastic Aerator Speedy Locknut
8 Kitchen 8 Kitchen Gooseneck 4 Kitchen 10979 Chrome 10991 Chrome 10991W White 10987 Chrome 4 Lavatory 4 Lavatory/Shower 8 Tub/Shower 10983 Chrome 10983W White 10988 Chrome 10981 Chrome 4 Tub/Shower 8
More informationPRODUCT SELECTION PORTFOLIO
PRODUCT SELECTION PORTFOLIO OLGA NUDELL 847-780-0120 ONUDELL@SHOPSTUDIO41.COM HIGHLAND PARK KITCHEN SINK FAR00000000000000INCL SINK RACK FOR THE LEFT SINK - Vault 35-1/2 X 21-1/4 X 9-5/16 Under-mount Smart
More informationDESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.
PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Utilize wall hung toilet room fixtures. Urinals for handicapped may be
More informationLAV FCO WCO NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.
ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE
More information2016 CALIFORNIA CODES KITCHEN, BATH & LAUNDRY REMODEL REQUIREMENTS
City of Redwood City Community Development Department Building and Inspection Department 1017 Middlefield Road Redwood City, CA 94063 Phone (650) 780-7350 2016 CALIFORNIA CODES KITCHEN, BATH & LAUNDRY
More informationFEBRUARY 2O19 SPECIALS UNBELIEVABLE QUALITY! FANTASTIC PRICE!!! TRY ONE
FEBRUARY 2O19 SPECIALS WHAT YOU WANT WHEN YOU WANT IT UNBELIEVABLE QUALITY! FANTASTIC PRICE!!! TRY ONE PEX COMBO CRIMP TOOLS Features interactive jaws for 360 crimping. Conforms to ASTM F1807 specifications,
More informationSummary of Substantive Changes between the 2012 and 2018 editions of ASME A /CSA B125.1 Plumbing Supply Fittings
Summary of Substantive Changes between the 2012 and 2018 editions of ASME A112.18.1/CSA B125.1 Plumbing Supply Fittings Presented to the IAPMO Standards Review Committee on May 6, 2013 General: The changes
More informationSECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS
SECTION 22 34 00 (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS System shall provide a complete hot water return throughout the entire system with balancing (flow control) valves not less than 10 feet from
More informationInstructions. Certifications Chrome 2-handle Chrome 3-handle 10-B83-WCH-AD Chrome 3-handle 10-B82-WCH-AD Chrome 2-handle
Instructions 623282 Chrome 2-handle *Image may vary slightly from actual product Tools Required Adjustable Wrench Groove Joint Pliers Pipe Wrench Phillips Screwdriver Pipe Tape or pipe thread compound
More informationPlumbing. September 8, 2018 Prices and product availability are subject to change without notice. 32" Curved Shower Pan with Round Front - Parchment
Page 1 of 19 Plumbing 32" Shower Surround with Wainscot Design - 32" Curved Shower Pan with Round Front - $128.00 (df-323244891) Dual Lever Pull Out Spout Kitchen Faucet - Venetian Bronze $108.74 (725110-VB)
More informationCORALAIS BODYSPA BATH AND SHOWER FAUCET
CORALAIS BODYSPA BATH AND SHOWER FAUCET 1. BEFORE YOU BEGIN HOW TO USE THESE INSTRUCTIONS Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation
More informationThermostatic tub. Maxima SAMPLE INSTALLATION. S5333/2 (page 47) + S2262 (page 47) S2095 (page 58) S2150 (page 57) + S2172 (page 57)
Thermostatic tub SAMPLE INSTALLATION S5/ (page 47) + S6 (page 47) S095 (page 58) S50 (page 57) + S7 (page 57) S5/ (page 47) + S6 (page 47) S095 (page 58) S0 (page 57) + S (page 57) S5/ (page 47) + S6 (page
More information2015 Ferguson Enterprises, Inc. Effective Date: February 1, 2015 PL MIR-PRICE
US PRICE BOOK 2015 Ferguson Enterprises, Inc. Effective Date: February 1, 2015 PL MIR-PRICE 0215 24137 These prices supersede previous price lists and are subject to change without notice. WHAT'S NEW PENDLETON
More informationPressure balance shower. Olivia SAMPLE INSTALLATION. S5009/1 (page 208) + S2442 (page 208) S2098 (page 213) + S2123 (page 213)
Pressure balance shower SAMPLE INSTALLATION S5009/ (page 08) + S44 (page 08) S5009/ (page 08) + S44 (page 08) S044 (page ) + S0 (page ) S098 (page ) + S (page ) A - B A - B A B S5009/ (page 08) + S44 (page
More informationSECTION MORTUARY EQUIPMENT
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 11 78 00 MORTUARY EQUIPMENT SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Delete other items or paragraphs in the section that are
More informationPLUMBING REQUIREMENTS
PLUMBING REQUIREMENTS This handout is a compilation of the standard requirements based on the State Plumbing Code and City Ordinance for projects of this type. This information sheet does not contain all
More informationGENERAL PLUMBING REQUIREMENTS
22 00 00 GENERAL PLUMBING REQUIRMENTS 1. GENERAL A. Related sections: i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables
More informationPERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18
NAVFAC PTS-D20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-D20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION D20 PLUMBING 02/18 NOTE: This section
More informationAPPENDIX V: PLUMBING FIXTURE SCHEDULE
APPENDIX V: PLUMBING FIXTURE SCHEDULE LOCATION ITEM MFGR MODEL COLOR/FINISH NOTES KITCHEN ISLAND Faucet Dornbracht 33820625 + 27719970 Meta.02 Sink Kraus KHU32 Kraus Pax 16 Gauge Stainless Steel 235 mm
More informationRead Only Document Not For Distribution
Chapter 5 Traps, Cleanouts and Backwater Valves 5.1 SEPARATE TRAPS FOR EACH FIXTURE a. Plumbing fixtures shall be separately trapped by a water seal trap placed as close as possible to the fixture outlet.
More informationSECTION DOMESTIC WATER PIPING SPECIALTIES
SECTION 22 11 19 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationLevel I Chapter 1 Worksheet
Chapter 1 Worksheet 1. For applicability requirements of the Plumbing Code, refer to: a. Building Code b. Administration and Enforcement Code c. Plumbing Code d. Residential Code 2. The provisions of the
More informationHinesville First United Methodist Church SECTION RESIDENTIAL APPLIANCES
SECTION 11 3100 RESIDENTIAL APPLIANCES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 11/06/2017
SECTION 10 2800 - TOILET, BATH, AND LAUNDRY ACCESSORIES GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationSECTION ELECTRIC WATER HEATERS
SECTION 22 36 01 ELECTRIC PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More information2. All necessary storm and sanitary pumps shall be tied into emergency power, and sump levels shall be monitored electronically through the B.A.S.
DIVISION 22 00 00 22 30 00 EQUIPMENT Page 1 of 10 22 30 00 EQUIPMENT 22 01 01 GENERAL REQUIREMENTS General 1. All plumbing shall comply with the B.C. Plumbing Code. 1. Avoid the use of storm pumps and
More informationWARRANTY POLICY & RECOMMENDED MAINTENANCE
WARRANTY POLICY & RECOMMENDED MAINTENANCE WARRANTY POLICY The following information will explain the plumbing components and warranty coverage for the plumbing systems and fixtures in your new home. It
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 3300 - ELECTRIC, DOMESTIC WATER HEATERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationSECTION ELECTRIC WATER HEATERS
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Specification Sections, apply to this Section. B. Related Sections:
More information$0.98 $ KITCHEN SINK STRAINER, 3-1/2" x BATH TUB DRAIN, 1-15/16" x 2-3/4" x $ $1.89
*s are Subject to Change without Notice.* WASHERS Rubber Beveled 5-1915 CLOSET, 3/8" O.D. TUBE $0.20 5-1916 CLOSET, 1/2" O.D. TUBE $0.20 5-1917 LAVATORY, 1/2" TALL x 3/8" O.D. $0.20 TUBE 5-1849 LAVATORY,
More informationKallista Bath Flip Drain
P21586 Page 1 of 7 THANK YOU FOR CHOOSING KALLISTA We appreciate your commitment to Kallista quality products. Please take a moment to review this manual before you install your Kallista product. If you
More informationInstructions. Certifications Brass w/built-in Stop Valve. Pressure Balance Shower Valve. Tools Required. Important Points.
Instructions Tools Required Adjustable Wrench Groove Joint Pliers Pipe Wrench Phillips Screwdriver Pipe Tape or Pipe Thread Compound Safety Tips If you solder the joints during installation, the seats,
More informationMechanical Inspection Plumbing
0811 Fixtures Sinks, drinking fountains, water closets, showers, etc. Classroom Sinks. Classroom sinks (19) are enameled cast iron self rimming side ledge with gooseneck faucet trim with index handles,
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 12/12/2018
SECTION 10 2800 - TOILET, BATH, AND LAUNDRY ACCESSORIES GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationRead Only Document Not For Distribution
Chapter 9 Indirect Waste Piping and Special Wastes 9.1 INDIRECT WASTES 9.1.1 General Drains from fixtures, fixture compartments, equipment, appliances, appurtenances, and other devices requiring protection
More informationC. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers.
SECTION 22 10 00 PLUMBING PIPING AND PUMPS PART 1 - GENERAL 1.1 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.
More informationHIGH QUALITY PRICED RIGHT! Product Guide 2/19
HIGH QUALITY PRICED RIGHT! Product Guide 2019 2/19 CONTENTS Faucets Kitchen............... 3 Lavatory............. 3-4 Laundry.............. 4 Trim Kits.............. 4 Sinks Kitchen............... 5 Bar................
More informationGARCIA GALUSKA DESOUSA Consulting Engineers
L#58619/Page 1/November 1, 2017 PLUMBING Executive Summary: Presently, the Plumbing Systems serving the building are cold water, hot water, sanitary, waste and vent system, storm drain piping, and natural
More informationCLINICAL SERVICES ADMINISTRATION (214)
CLINICAL SERVICES ADMINISTRATION (214) 1 - M EDICAL SERVICE AREA 1 - OFDC2 - Interview Room A5075 Dispenser, Soap, Disposable 1 VV Disposable soap dispenser. One-handed dispensing operation. Designed to
More informationTitle: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Plumbing Standards
Date Description of Change Pages / Sections Modified ID 8/5/17 Entire document - mgl PART 1 - INTRODUCTION 1.1 This section applies to Plumbing for campus institutional facilities. A. Purpose: Yale University
More informationAcrylic Claw Foot Tub
Acrylic Claw Foot Tub Wrench or socket Drill & Bits Parts Recommended 2-2 x12 boards 4 Lag Bolts 4 Flat Washers Be sure to re-inforce the floor before securing tub. We recommend 2-2 x12 s securely fastened
More informationFAUCET REPAIR RV PARTS & ACCESSORIES RV PARTS & ACCESSORIES FAUCET STEMS FAUCET ESCUTCHEONS
FAUCET REPAIR BAG NO. FAUCET STEMS RV1 Phoenix/Streamway Brass stem 6 RV2 Phoenix/Streamway Brass stem 6 RV10 Phoenix/Streamway Plastic stem 6 Hot or cold Old style 1 pair RV12 Phoenix/Streamway Plastic
More informationPlumbing 1. Kitchen Faucets. McArthur Homes - Personal Selections Catalog. Included PF-1100 PF-1101 PF-1120 PF-1122 PF-1121 PF-1132 PF-1131 PF-1130
Kitchen Faucets Plumbing 1 Chateau - Chrome Included Integra - Chrome PF-1100 Integra - Stainless Steel PF-1101 Camerist - Chrome PF-1120 Camerist - Stainless Steel PF-1121 Camerist- Oil Rubbed Bronze
More informationO.D / 2" (444) 15 1 / 2 " (393) Maximum I.D / 4 " (336) 1 3 / 4 " (45) 1 1 / 4 " (32)
standard basin 100 Specifications 1.1.3 Standard Round Basin with Overflow Item No. 100 For Undercounter Mount Installation Recommended openings for Under Counter mounting: Min. Diameter: 13 1 / 4 (337).
More informationPlumbing Guidelines 2015 Minnesota Accessibility Code Based on the 2012 IBC and 2009 ANSI A117.1
Plumbing Guidelines 2015 Minnesota Accessibility Code Based on the 2012 IBC and 2009 ANSI A117.1 This document provides basic and fundamental information for accessible plumbing fixtures, toilet rooms
More informationPERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18
NAVFAC PTS-D20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-D20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION D20 PLUMBING 02/18 NOTE: This section
More informationPLUMBING INSTALLATIONS
PLANNING, PROPERTY AND DEVELOPMENT DEPARTMENT PLUMBING INSTALLATIONS A homeowner guide to plumbing requirements for single-family dwellings November 2017 contents Permit Requirements... 3 Inspection Requirements...
More informationPlumbing Guidelines 2012 IBC/ANSI A
Plumbing Guidelines 2012 IBC/ANSI A117.1-2009 This document provides basic and fundamental information for accessible plumbing fixtures, toilet rooms and bathing facilities. It is not intended to replace
More informationAcrylic Claw Foot Tub
Acrylic Claw Foot Tub Wrench or socket Drill & Bits Parts Recommended 2-2 x12 boards 4 Lag Bolts 4 Flat Washers Be sure to re-inforce the floor before securing tub. We recommend 2-2 x12 s securely fastened
More informationplumbing for greywater
plumbing for greywater october 2015 christina bertea ~union trained journeywoman plumber (1978) ~plumbing contractor (1996) ~greywater action singingwater@jps.net plumbing for greywater basic parts of
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 10 - SPECIALTIES
SECTION 105200 - FIRE-PROTECTION SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationUniversity of New Hampshire Scholars' Repository
University of New Hampshire University of New Hampshire Scholars' Repository Division 22 Plumbing Chapter 5 Technical Construction and Renovation Standards Fall 9-8-2018 224000 - Plumbing Stephanie L.
More informationCHAPTER 10 TRAPS AND INTERCEPTORS TABLE 10-1 HORIZONTAL LENGTHS OF TRAP ARMS (EXCEPT FOR WATER CLOSETS AND SIMILAR FIXTURES) 1, 2
CHAPTER 10 TRAPS AND INTERCEPTORS < 1001.0 Traps Required. Each plumbing fixture, excepting those having integral traps or as permitted in Section 1001.1, shall be separately trapped by an approved type
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING. A. This Section includes the following sanitary drainage piping specialties:
SECTION 221319 - SANITARY WASTE PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following sanitary drainage piping specialties: 1. Backwater valves. 2. Cleanouts. 3. Floor
More informationMoen Commercial Products Eco-Performance Product Guide
Moen Commercial Products Eco-Performance Product Guide Learn how the use of MOEN Commercial Products What is LEED? The Leadership in Energy and Environmental Design (LEED) Green Building Rating System
More informationSelection Sheet st St st St, Pittsburgh PA 15201
Flooring Living, Dining, Bedroom, Halls - Install historic pine floors finished with one coat of Bona Seal and two coats of Bona Mega. Kitchen - 24 x 24 black porcelain tile installed staggered (Grout
More informationSummary of BBS Proposed Ohio Plumbing Code Rule Changes October 2016
Summary of BBS Proposed Ohio Plumbing Code Rule Changes October 2016 Ohio Administrative Code Rule Number OPC Section IPC origin Reason for proposed 4101:3-2-01 Alternate on-site 2015 Added definition
More informationThe BEST Plumbing Specialties. One Source. F 1 BRAIDED SUPPLIES
The BEST Plumbing Specialties. One Source. F 1 BRAIDED SUPPLIES F BRAIDED SUPPLY - TOILET - Stainless steel #304 braided supply - PVC inner hose (CSA approved) - Plated brass nuts - 100% pressure tested
More informationBRADLEY CORPORATION WASH FOUNTAINS Page 1 of 8
BRADLEY WASHFOUNTAINS Bradley Corporation, a leader in the manufacture of fixtures and plumbing products, provides a variety of commercial wash fountains for every commercial and industrial need. Constructed
More informationBathroom remodeling Dictionary
Bathroom remodeling Dictionary Anti Scald Pressure balance Valve Allows water temperature to stay constant even with changes in the water pressure. Backsplash Vertical extension to a counter which will
More information