FlexFilter EX A state of the art filter system to meet your current and future needs

Transcription

1 A state of the art filter system to meet your current and future needs Protect Your Staff and Increase Efficiency One of the hazards with combustible dust is that it settles on all surfaces within the facility. Once the settled dust is disturbed into the air as a result of an initial explosion, it becomes the fuel for secondary explosions. An effective solution is to prevent dust from spreading around the workplace by capturing the dust at the source where it is generated, preventing it from spreading into the facility. A clean work environment, besides having a minimized risk of explosion, is efficient, maximizes production time, increases product quality, and provides significant cost savings. Modular design for future growth Equipped with an explosion relief panel Standard 70L bin with antistatic plastic bag, or conductive bulk bag fitted to a fully automatic emptying device ATEX Directive FlexFilter EX combustible dust collector The Flexfilter EX is manufactured to withstand overpressure from a potential explosion and is equipped with an explosion relief panel. The harmful effects of an explosion are minimized by venting the overpressure and flames via the relief panel to a safe area. The dust collector is fully earth bonded in all modular components. All electric equipment is EX classified for combustible dust. The dust is collected in either a standard 70L bin with antistatic plastic bag, or for large installations, in a conductive bulk bag fitted to a fully automatic emptying device. The FlexFilter EX also comes equipped with a monitored control filter. The control filter stops the classified zone from spreading further in the pipe system allowing the use of nonclassified suction units like the VAC and RBU. Dust Explosion A solid piece of any given material is normally safe and noncombustible. However, creating a fine dust from the very same material could make it combustible. Compare a solid piece of wood to wood dust! Furthermore, the finer the dust particles are, the more combustible they become! When combustible material is dispersed as fine dust and combined with air and an ignition source, the risk for a dust explosion increases. Some examples of combustible materials: Synthetic organic dust: Plastic grinding dust, reinforced plastics and other composite materials, powder paint, cosmetics. Metal dust: Fine dust of aluminium, magnesium, titanium, chromium. Organic dust from food industry: Baking flour, soup powder, spices, sugar. Pharmaceutical dust: A large number of powders used in pharmaceutical industries are combustible. FlexFilter EX is the third generation high vacuum dust collector for potentially combustible dusts. The unit complies with the ATEX directive. Nederman has been operating in the field of environmental equipment for more than 50 years and has extensive experience in equipment and systems for potentially combustible dust. All FlexFilter EX units are marked with the EX symbol and are category 3D equipment according to directive 94/9/EC. This means that models with the EX symbol may be placed in areas classified as zone 22 according to directive 1999/92/EC. The internal side of the FlexFilter is generally classified as zone 20 or 21. Since there is no internal ignition source inside FlexFilter EX, the inside is to be considered a simple filter/silo and does not fall under the scope of the directive 94/9/EC. Source: ATEX working group considerations; How should the directive be applied to filter units and vented silo bins. Note! Since July 1, 2006, all existing sites, as well as new sites must be fully compliant with the ATEX directive. Product marking The FlexFilter EX is ATEX classified and marked: CE II 3D Ex c T=130 ºC X Permitted materials It is of outmost importance to know the properties of the extracted material. The FlexFilter EX is intended to be a part of an extraction system collecting material with the following properties: Dust explosion class: St1 and St2 Pmax: 10 bar MIE (Minimum Ignition Energy) > 3 mj MIT (Minimum Ignition Temperature) > 205 C Technical leaflet (06) Date

2 Materials with properties not given within the above stated values must be investigated prior to use with the FlexFilter EX. Contact Nederman for technical support and Dust application investigation. Modular and flexible system Thanks to its modular design, a Nederman high vacuum system can be designed to meet your unique requirements and provide freedom to expand capacity for future growth. Several FlexFilter EX and vacuum units can be combined in clusters to create larger systems. Note! The HV Starter for these EX units must be quoted on project basis, i.e. the standard HV starter is not sufficient for the control of the new FlexFilter EX. Please contact your local Nederman representative for assistance. Explosion suppression system For indoor installations, an explosion suppression system can be used instead of the explosion relief panel. With an explosion suppression system, the early stage of an explosion is detected with optical or pressure devices, and an extinguishing agent is quickly dispersed into the filter. The suppression of the explosion is initiated in an extremely short time after explosion s detection (in milliseconds), and stops the pressure rise and extinguishes (suppresses) the flames of the explosion before it reaches excessive pressure levels. Note! The explosion suppression system must be quoted on project basis. Contact Nederman for technical support and Dust application investigation. FlexFilter EX units for multi purpose use On-tool extraction of sanding dust On-tool trimming composites Cleaning in a bakery Work floor cleaning

3 Technical Data FlexFilter EX 1600 m³/h (942 cfm) Filter area *) 12 m² 255 kg (562 lb) Dimensions H L x W x 800 mm 70 l Flanged Ø 150 mm (5.9 in) Ø 203,2 mm (8 in) FlexFilter Twin EX Filter area *) 2x12 m² Dimensions H L x W FlexFilter EX High Stand 3200 m³/h (1884 cfm) 485 kg (1069 lb) x 800 mm 2x70 l Flanged Ø 200 mm (7.87 in) 2 x Ø 203,2 mm (8 in) The FlexFilter EX High Stand is a frame mounted dust collector. A TVFD, Twin Valve Feed out Device, facilitates automatic emptying of the dust collector without loss of vacuum. The FlexFilter EX High Stand is delivered with conductive bulk bags for collection of the dust. The FlexFilter EX High Stand is prepared for legs of different heights that can be fitted to the frame. Filter area *) 12 m² Dimensions H L x W 1600 m³/h (942 cfm) 450 kg (992 lb) mm TVFD and Bulk-bag or similar Flanged Ø 150 mm (5.9 in) Ø 203,2 mm (8 in) FlexFilter Twin EX High Stand The FlexFilter Twin EX High Stand is a frame mounted dust collector. A TVFD, Twin Valve Feed out Device, facilitates automatic emptying of the dust collector without loss of vacuum. The FlexFilter Twin EX High Stand is delivered with conductive bulk bags for collection of the dust. The FlexFilter Twin EX High Stand is prepared for legs of different heights that can be fitted to the frame m³/h (1884 cfm) Filter area *) 2 12 m² Dimensions H L x W 850 kg (1874 lb) mm TVFD and Bulk-bag or similar. Flanged Ø 200 mm (7.87 in) 2 Ø 203,2 mm (8 in) *) Main filter material and control filter material are classified as category M according to DIN EN

4 Accessories Legs The legs are suitable for FlexFilter EX High Stand and FlexFilter Twin EX High Stand when conductive bulk bags or other approved collection methods are used. The legs provide easy access to the bulk bags either from the front or the back. Two standard leg heights are available: High and Extra high. The Extra High legs are the highest legs allowed. The legs are supplied complete including all supports and fasteners needed to fit them to the dust collector frame (foundation anchor bolts are NOT included). Legs Single High Dimensions H L W: mm : 108 kg (238 lb) Legs Single Extra High Dimensions H L W: mm : 131 kg (289 lb) Legs Twin High Dimensions H L W: mm : 113 kg (249 lb) Legs Twin Extra High Dimensions H L W: mm : 135 kg (298 lb) Service platform The service platform is suitable for FlexFilter EX High Stand and FlexFilter Twin EX High Stand. The service platform gives easy access when changing the main filters and control filters. Anyone of the rails on the service platform can be removed to attach a ladder, or a bridge linking to another service platform Max load on service platform: 400 kg (882 lb) Service platform for FlexFilter EX Single including ladder or connection kit: 100 kg (221 lb) Service platform for FlexFilter EX Twin including ladder or connection kit: 130 kg (286 lb) Ladder for Service platform FlexFilter EX The ladder is suitable when you use a service platform. The ladder can be mounted in rear and side postion of the service platform. Adjustable height for legs extra high., see service platform Connection kit for service platform The connection kit is suitable when you want to link service platforms together., see service platform Deflector 220x540 Explosion venting deflector for all FlexFilter EX with explosion relief panel. In case of explosion venting, the deflector alters the risk area. single: 1 x 11 kg (1 x 24,25 lb) twin: 2 x 11 kg (2 x 24,25 lb) Twin Rf kit The Twin RF kit (Reversed Flow) makes it possible to clean the filters during operation, without loss of vacuum. The RF kit is also suitable for hard to clean dust that require a stronger blast of air for the cleaning. The RF kit has an arrangement of valves and uses the capacity of the vacuum unit to clean one filter module while the other remains in normal operation. The Twin RF kit only available for FlexFilter Twin EX

5 Accessories (continued) Differential Pressure Switch kpa NC The Differential Pressure Switch (DPS) monitors the pressure drop across for example the main filter. If the pressure drop exceeds a set value between 3-15 kpa the alarm will be activated. The DPS can stop the vacuum unit if wired to the Nederman High Vacuum Starter. Normally Closed (NC) or Normally Open (NO) function. If installed within EX zone, intrinsic safe circuit must be used. Switching voltage: AC eff: min 24 V / max 250 V DC: min 24 V / max 48 V Switching current: AC eff. max 6 A (at cos φ 1) min 20 ma DC: max 1 A / min 20 ma BLI EX The Bin Level Indicator (BLI) is a proximity switch activated by for example a full dust bin. It can stop the vacuum unit if wired to the Nederman High Vacuum Starter. Resets automatically when the bin is emptied. Adjustable sensibility. Normally Closed (NC) or Normally Open (NO) function. Supply Voltage: VDC, VAC Supply Current: 3 VAC Output: S.P.C.O Output rating: 240 V 3 A non-ind. ATEX Category: 1D T100 C (Tamb. -15 C C) The BLI EX comes equipped with 5 m cable Fire alarm The Fire alarm is activated when the temperature exceeds +140 C. It can stop the vacuum unit if wired to the Nederman High Vacuum Starter. Can be used to trigger warnings such as external fire alarm. If installed within EX zone, intrinsic safe circuit must be used. Voltage: 24 V AC/DC. (Includes special cables but not standard external cables) Accessories piping Flanged pipes Pressure resistant pipes and bends for installation between filter inlet and the isolation valve. An adapter is needed between the pipe ans isolation valve flanges. Fasteners and seals are included. Flanged pipe Ø 200 mm, 1 m Flanged pipe Ø 200 mm, 0,5 m Flanged bend 90 Ø 200 mm Flanged pipe Ø 150 mm, 1 m Flanged pipe Ø150 mm, 0,5 m Flanged bend 90 Ø 150 mm Flanged bend 45º Ø 150 mm Flanged bend 90º 150 mm

6 Accessories piping (continued) Flanged transition pipe 0,2 m DN150 B-Flap Flanged transition pipe 0,2 m DN200 B-Flap Adapter flange/flange DN150 B-Flap Adapter flange/flange DN200 B-Flap Consumables Plastic Bag Dust collecting bag made of special conductive material for EX applications. Dimensions: 730 x 900 For FlexFilter EX standard 70 l (18.5 gal) bin 20 pcs Use only Nederman conductive containers when collecting combustible material Big Bag PP Conductive type C Dust collecting bulk bag made of special conductive material for EX applications. Internal dimension : cm S.W.L: 1100 kg 25 pcs Use only Nederman conductive containers when collecting combustible material Antistatic filter Main filter replacement kit including filter, attachment and top gasket. Area: 12 m 2 (129 square feet) : 27 kg (60 lbs) Control filter insert Control filter replacement used in line between the main filter and the vacuum unit and allows for the use of a non EX vacuum unit in combination with EX filter units. Dimension: DY325 X L800 mm

7 Dimensions: High Stand Single and Twin 1000 mm in Dimensions: Low Stand Single and Twin 1000 mm in 760 mm in 1040 / in / 63.0 in 1985 mm / 2545 mm 78.2 in / in 959 mm in 797 mm in 2480 mm 98 in 450 mm in 2140 mm in 2414 mm in H ~ 1000 mm in 525 mm in 428 mm in 1850 mm in 690 mm in mm in 1810 mm C-C in 1518 mm in 1490 mm C-C in 45 C-C in 18 mm.71 in 1339 mm 8x O in 735 mm C-C in C-C in 1379 mm 750 mm in 312 mm in 14 mm.55 in 4x Ø 1810 mm C-C in 1490 mm C-C in 2955 mm C-C in 8x O 18 mm.71 in 2486 mm C-C in 150 mm C-C 5.91 in 600 mm C-C in 750 mm C-C in 1862 mm C-C in Twin x 7x 10 mm 8x Ø.39 in 195 mm Ø 7.68 in 220 mm Ø 8.66 in C-C in 14 mm 8x Ø.55 in C-C in Single 151 mm Ø 5.94 in 2360 mm C-C in 2400 mm C-C in C-C in 10 mm 8x Ø.39 in 5 mm.20 in mm Ø in 5 mm.20 in mm Ø in mm Ø in